# changelog

author: Paul Howarth <paul@city-fan.org> - 0.06-2
changelog:
  - Run release tests as well as standard test suite in %check
  - Drop no-longer-needed buildreq perl(Filter::Util::Call)
  - New buildreqs perl(Test::Perl::Critic), perl(Test::Pod), perl(Test::Spelling)


author: Paul Howarth <paul@city-fan.org> - 0.06-4
changelog:
  - Drop -tests subpackage (general lack of interest in this), but include
    them as documentation for the main package
  - Don't need explicit runtime dependency on perl(Test::Builder::Module) if we
    have rpm ≥ 4.9 as it can auto-detect it
  - BR: at least version 0.61 of perl(Test::More) as per upstream
  - Drop unnecessary version requirement for perl(ExtUtils::MakeMaker)
  - Drop redundant %{?perl_default_filter}
  - BR: aspell-en rather than hunspell-en on old distributions where
    Test::Spelling uses aspell instead of hunspell
  - Don't BR: perl(Test::Perl::Critic) when bootstrapping
  - Don't use macros for commands
  - Don't need to remove empty directories from buildroot
  - Make %files list more explicit
  - Drop %defattr, redundant since rpm 4.4
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.06-9
changelog:
  - BR: perl(base), perl(Cwd), perl(Data::Dumper)
  - RHEL builds don't use Test::Spelling so they don't need dictionaries either


author: Paul Howarth <paul@city-fan.org> - 0.98-241
changelog:
  - Merge tests sub-package back into main package
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4
  - Make %files list more explicit
  - Don't use macros for commands
  - Mark Tutorial.pod as %doc
  - Drop explicit dependency on perl-devel


author: Paul Howarth <paul@city-fan.org> - 0.15-1
changelog:
  - Update to 0.15:
    - Begin adding actual tests (hilariously, adding the suggested t/pod-spell.t
      to this dist to test itself found a typo: "stopwards")
  - BR: perl(Test::Tester) and hunspell-en


author: Jitka Plesnikova <jplesnik@redhat.com> - 0.15-5
changelog:
  - Update dependencies
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> - 0.16-1
changelog:
  - Update to 0.16:
    - Allow use of a custom POD parser rather than Pod::Spell using
      set_pod_parser
  - Re-diff patch to avoid shipping .orig file


author: Paul Howarth <paul@city-fan.org> - 0.18-1
changelog:
  - Update to 0.18:
    - Work around Pod::Spell limitations
    - Improve case handling
    - Improve test failure reporting
    - Include more useful info in Test-Spelling's own test suite


author: Paul Howarth <paul@city-fan.org> - 0.19-1
changelog:
  - Update to 0.19:
    - For more consistent results, avoid using the user's local aspell dictionary
      (CPAN RT#56483)
  - Update hunspell preference patch


author: Paul Howarth <paul@city-fan.org> - 1.09-8
changelog:
  - Don't run the release tests when bootstrapping, to avoid circular build deps
  - Sync buildreqs with upstream:
    - BR: perl(Exporter)
    - BR: perl(ExtUtils::MakeMaker) ≥ 6.42
    - BR: perl(File::Spec) ≥ 0.80
    - Bump perl(Pod::Simple) version requirement to at least 3.07
    - BR: perl(Test::Builder)
    - Drop perl(Test::More) version requirement to a minimum of 0.42
  - Make %files list more explicit
  - Drop %defattr, redundant since rpm 4.4
  - Use %{_fixperms} macro rather than our own chmod incantation
  - Don't need to remove empty directories from the buildroot
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 0.06-9
changelog:
  - Can run spelling test unconditionally now
  - BR: perl(ExtUtils::Manifest)
  - Don't BR: perl(Test::Perl::Critic) if we're bootstrapping
  - Use %{_fixperms} macro rather than our own chmod incantation
  - Run developer tests in a separate test run
  - Drop redundant %{?perl_default_filter}
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 0.06-11
changelog:
  - Separate bootstrap and RHEL conditionals
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from buildroot
  - BR: perl(base)


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.04-19
changelog:
  - Specify all dependencies
  - Drop %defattr, redundant since rpm 4.4
  - Fix mixed use of spaces and tabs


author: Paul Howarth <paul@city-fan.org> - 0.001-5
changelog:
  - Fix compatibility with Perl 5.16 (CPAN RT#72133)
  - Don't need to remove empty directories from buildroot


author: Paul Howarth <paul@city-fan.org> - 0.002-1
changelog:
  - Update to 0.002
    - Fix compatibility with Perl 5.16 (CPAN RT#72133)
  - Drop upstreamed patch for 5.16 compatibility


author: Paul Howarth <paul@city-fan.org> - 0.004-1
changelog:
  - Update to 0.004
    - Re-package with Module::Build
    - Remove an unnecessary use of smart match operator
  - Switch to Module::Build flow
  - Classify buildreqs by usage
  - Drop Test::Spelling requirement, no longer used


author: Paul Howarth <paul@city-fan.org> - 0.24-1
changelog:
  - Update to 0.24 (compatibility with Carp 1.25) (#808856)
  - BR: Perl core modules that might be dual-lived
  - BR/R: at least version 1.02 of perl(Tree::DAG_Node)
  - Drop redundant buildreq perl(Test::Exception)
  - Don't need to remove empty directories from buildroot
  - Drop explicit versioned runtime dependency on Test::Builder, satisfied in
    all distributions since the dawn of time (nearly)
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Drop %defattr, redundant since rpm 4.4
  - Drop redundant %{?perl_default_filter}
  - Make %files list more explicit
  - Don't use macros for commands


author: Jitka Plesnikova <jplesnik@redhat.com> - 0.04-18
changelog:
  - Update dependencies
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Remove build root cleaning, BuildRoot definition and %defattr


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.42-2
changelog:
  - Add BR perl(File::Spec)
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Remove deleting empty directories
  - Remove defattr


author: Jitka Plesnikova <jplesnik@redhat.com> - 1:1.20-10
changelog:
  - Remove perl(base) from BR
  - Package README and ChangeLog
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Remove deleting empty directories


author: Jitka Plesnikova <jplesnik@redhat.com> - 804.030-2
changelog:
  - Update license - add SWL
  - Specify all dependencies
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Drop removing of empty directory
  - Package COPYING


author: Petr Pisar <ppisar@redhat.com> - 804.030-4
changelog:
  - Fix file modes changed while building (bug #1017322)
  - Correct change log entry date (bug #1017322)


author: Paul Howarth <paul@city-fan.org> - 1.07-1
changelog:
  - Update to 1.07
    - New maintainer: Ron Savage
    - Pre-emptive apologies for any changes which are not back-compatible; no
      such problems are expected, but the introduction of new methods may
      disconcert some viewers
    - Fix CPAN RT#78858 and audit code for similar problems
    - Fix CPAN RT#79506
    - Rename ChangeLog to CHANGES, and add Changelog.ini
    - Replace all uses of cyclicity_fault() and Carp::croak with die
    - Remove unused methods: decommission_root(), cyclicity_allowed(),
      cyclicity_fault(), inaugurate_root(), no_cyclicity() and _update_links();
      OK - cyclicity_fault() was called once - it just died
    - Add methods: format_node(), hashref2string(), is_root(), node2string(),
      tree2string()
    - Reformat the POD big-time
    - Add Build.PL
    - Re-write Makefile.PL
    - Remove use vars(@ISA $Debug $VERSION), and replace latter 2 with 'our ...'
    - Rename t/00_about_verbose.t to t/about.perl.t
    - Add scripts/cut.and.paste.subtrees.pl (Warning: Some trees get into an
      infinite loop)
    - Add t/cut.and.paste.subtrees.t (Warning: Some trees get into an infinite
      loop)
    - Document the options (discouraged by Sean) supported in the call to
      new($hashref)
  - This release by RSAVAGE -> update source URL
  - BR: perl(Test::More) and perl(Test::Pod) ≥ 1.00
  - Modernize spec file:
    - Drop %clean section
    - Drop buildroot definition and cleaning
    - Don't use macros for commands
    - Don't need to remove empty directories from the buildroot
    - Use %{_fixperms} macro rather than our own chmod incantation
    - Drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> - 1.09-1
changelog:
  - Update to 1.09
    - No code changes
    - For pre-reqs such as strict, warnings, etc., which ship with Perl, set the
      version requirement to 0 (CPAN RT#80663)


author: Paul Howarth <paul@city-fan.org> - 1.12-1
changelog:
  - Update to 1.12
    - Change text in README referring to licence to match text in body of source,
      since it was in conflict with the Artistic Licence V 2.0
    - Rename CHANGES to Changes as per CPAN::Changes::SPEC
    - Various spelling fixes in the docs


author: Paul Howarth <paul@city-fan.org> - 0.11-4
changelog:
  - BR: perl(Carp)
  - Don't need to remove empty directories from buildroot
  - Don't use macros for commands
  - Drop redundant %{?perl_default_filter}
  - Enhance %description
  - Reinstate EPEL-5 compatibility:
    - Define buildroot
    - Clean buildroot in %install and %clean
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 1.59-3
changelog:
  - Break build dependency loop by only using perl(Business::ISBN) if we're not
    bootstrapping
  - BR: perl(Carp) and perl(Exporter)
  - Make %files list more explicit
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Use %{_fixperms} macro rather than our own chmod incantation
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 1.60-1
changelog:
  - Update to 1.60
    - Do not reverse the order of new parameters
    - Avoid test failure if the local hostname is 'foo' (CPAN RT#75519)
    - Work around a stupid join bug in 5.8.[12] (CPAN RT#59274)
    - Updated repository URL
  - Don't need to remove empty directories from buildroot
  - BR: perl(constant)


author: Paul Howarth <paul@city-fan.org> - 1.60-8
changelog:
  - Retain runtime dependency of perl(Business::ISBN) when bootstrapping; a
    better fix for the build dependency cycle was to drop LWP::Simple as a
    buildreq of perl-Business-ISBN (needed only for optional tests) when
    bootstrapping


author: Petr Pisar <ppisar@redhat.com> - 1:2.0016-1
changelog:
  - 2.0016 bump (disable XML_PARSE_HUGE by default to prevent from
    CVE-2003-1564, a recursive XML entity expansion leads to memory exhaustion
    in a XML parser)


author: Jitka Plesnikova <jplesnik@redhat.com> - 2.41-8
changelog:
  - Update dependencies and summary
  - Remove pre-RPM-4.9 filters
  - Remove deleting empty directories
  - Update REC-xml-19980210.xml to match new encoding


author: Paul Howarth <paul@city-fan.org> - 0.99-3
changelog:
  - Drop redundant runtime dependencies on perl(XML::LibXML) and
    perl(XML::LibXML::Common), which cause circular build dependencies (#720974)
  - Simplify provides and requires filters
  - Don't need to remove empty directories from buildroot
  - Mark POD files as %doc


author: Jitka Plesnikova <jplesnik@redhat.com> - 0.99-7
changelog:
  - Update dependencies and summary
  - Remove xmltest.xml due to copyright
  - Replace PERL_INSTALL_ROOT with DESTDIR


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.08-6
changelog:
  - Update dependencies
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Update description and summary
  - Remove deleting empty directories
  - Remove dist.ini from %doc


author: Petr Šabata <contyk@redhat.com> - 0.621-1
changelog:
  - 0.621 bump
  - Lots of bugfixes
  - Packaging examples
  - Fixing build-time deps and removing unneeded lines
  - Fixing changelog issues


author: Marcela Mašláňová <mmaslano@redhat.com> - 1.13-17
changelog:
  - 680418 - missing man page for xpath
  - applied debian patch, which added POD into xpath code, but also fix debian bug(#185292)


author: Marcela Mašláňová <mmaslano@redhat.com> - 1.13-22
changelog:
  - revert the patch. It breaks backward compatibility for some apps. 
  - the xpath has still man page installed.
  - Resolves: rhbz#1067903


author: Paul Howarth <paul@city-fan.org> - 0.81-2
changelog:
  - R: perl(Carp) and perl(Data::Dumper)
  - BR: perl(Carp), perl(constant) and perl(Exporter)
  - Release tests no longer shipped, so drop buildreqs for them and don't bother
    setting AUTOMATED_TESTING; run tests even when bootstrapping


author: Paul Howarth <paul@city-fan.org> - 0.84-2
changelog:
  - Haven't needed to fix documentation character encoding since 0.79
  - Drop Test::Base build dependency again to avoid a BR loop (#215637)
  - Filter private provides perl(yaml_mapping), perl(yaml_scalar) and
    perl(yaml_sequence)
  - Don't need to remove empty directories from the buildroot
  - This release by MSTROUT -> update source URL


author: Paul Howarth <paul@city-fan.org> 1.23-1
changelog:
  - Update to 1.23
    - Synchronize JSON::Syck with YAML::Syck version number
    - Add DumpInto functions (YAML+Syck), which dump into a provided scalar
      instead of a newly-allocated one
    - Modify DumpFile functions to output directly to the specified
      file/filehandle instead of buffering all output in memory
    - Avoid modifying numbers into strings when emitting
    - Fix error message typo: s/existant/existent/g
    - Fix for non-printable character detection
    - Quote if non-printable characters are present
    - Make sure that LoadBlessed=0 blocks all blessing
    - Start listing primary repo as http://github.com/toddr/YAML-Syck
    - README refreshed via perldoc -t
  - Require perl(XSLoader) at runtime
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot
  - Don't use macros for commands
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Make %files list more explicit


author: Paul Howarth <paul@city-fan.org> 1.24-1
changelog:
  - Update to 1.24
    - Implement $JSON::Syck::MaxDepth
    - Prevent failure when the same object is seen twice during Dump
    - Prevent YAML from being influenced by the previous change
    - MinGW64 compatibility (CPAN RT#78363)


author: Paul Howarth <paul@city-fan.org> 1.27-1
changelog:
  - Update to 1.27
    - Fix for hash randomization in yaml-alias.t on perl 5.18.0 (CPAN RT#84882,
      CPAN RT#84466)


author: Remi Collet <rcollet@redhat.com> - 5.5.16-19
changelog:
  - fix memory leak introduce in patch for CVE-2014-1943
  - fix heap-based buffer over-read in DateInterval CVE-2013-6712


author: Remi Collet <remi@fedoraproject.org> 1:1.9.4-14
changelog:
  - add explicit requires on all needed extensions (phpci)
  - fix pecl launcher (need ini to be parsed for some
    extenstions going to be build as shared, mainly simplexml)
  - add fix for new unpack format (php 5.5)


author: Remi Collet <remi@fedoraproject.org> - 3.0.7-5
changelog:
  - add patch for https://bugs.php.net/59602
    segfault in getExtendedStats
  - also provides php-memcache


author: Matthew Harmsen <mharmsen@redhat.com> 10.0.4-0.4
changelog:
  - Bugzilla Bug #986506 - Need to determine RPM packages to be excluded
    from compose . . . (exclude pki-kra, pki-ocsp, and pki-tks from rhel 7)


author: Ade Lee <alee@redhat.com> 10.0.5-2
changelog:
  - Trac #739, BZ#999722 - Fixed error handling in DoUnrevoke servlet.
  - Trac #775, BZ#1018628 - Fixed errors during Tomcat shutdown.
  - Trac #776, BZ#1024679 - Added missing link for apache-commons-io
  - Trac #781, BZ#1024445 - Admin cert signed with SHA1, should be SHA256
  - Trac #780 - Store authentication info in session.
  - Trac #763 - Backup upgrade tracker.
  - Trac #779 - Renamed some CLI commands.
  - Trac #743 - Fixed references to /var/run and /var/lock in tmpfiles.


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:1.0-0.8.a2.1.2
changelog:
  - Update to maven 3
  - Replace nonstandard groups names with standard ones
  - Drop support for non-maven build
  - Add workarounds for RPM bug
  - Cleanup according to Fedora Packaging Guidelines
  - Include missing copyright file in javadoc package


author: Michal Srb <msrb@redhat.com> - 0:1.0-0.9.a2.1
changelog:
  - migrated to plexus-containers-container-default (#878580)
  - using global is preferred over define when defining macros
  - removed not used custom depmap file and its occurrence in spec file
  - removed unused Ant buildfile
  - fixed release number


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:2.3-1
changelog:
  - Update to upstream version 2.3
  - Use apache-commons-compress for bzip2 (de)compression
  - Resolves: CVE-2012-2098


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:2.4.2-2
changelog:
  - Update to latest packaging guidelines
  - Remove MIT license (only applies to test cases not binary rpm)


author: Michal Srb <msrb@redhat.com> - 0:1.0-0.15.a14
changelog:
  - Removed dependency to plexus-container-default (Resolves: #878570)
  - Removed forgotten older tarball from sources file
  - Fixed various rpmlint warnings


author: Michal Srb <msrb@redhat.com> - 1.0-0.2.alpha11
changelog:
  - Use direct link in Source0
  - Improved prep/setup section
  - mvn-rpmbuild verify is now in check section
  - More specific files section
  - add_maven_depmap macro now with -a option


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.5.5-7
changelog:
  - Fix license tag (Plexus license was replaced by MIT some time ago)
  - Update javadoc plugin BR version


author: Jaromir Capik <jcapik@redhat.com> - 1.0-0.6.a7
changelog:
  - Removal of plexus-maven-plugin dependency (not needed)
  - Minor spec file changes according to the latest guidelines


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.4-4
changelog:
  - Fixes according to new guidelines
  - Add spice-parent to Requires
  - Versionless jars & javadocs
  - Use maven3 to build


author: Jaromir Capik <jcapik@redhat.com> - 0:1.1.8-7
changelog:
  - Migration to maven3
  - Removal of plexus-maven-plugin (not needed)
  - Minor spec file changes according to the latest guidelines


author: Tim Waugh <twaugh@redhat.com> - 1:1.04-19
changelog:
  - Consistent use of macros.
  - Removed ancient obsoletes tag.
  - Clean buildroot in install section not prep section.
  - Make setup quiet.
  - Use noreplace for config files.


author: Richard W.M. Jones <rjones@redhat.com> - 0.44-1
changelog:
  - New upstream version 0.44.
  - Fix incorrect use of File::Temp->tempfile (RHBZ#953066).
  - Tidy up the spec file.
  - po4a-build.conf.5 and po4a-runtime.7 man pages are no longer
    installed in the English version for some (unknown) reason.


author: Richard W.M. Jones <rjones@redhat.com> - 0.44-9
changelog:
  - Fix bang path /usr/bin/env perl -> /usr/bin/perl (RHBZ#987035).
  - Increase verbosity of po4a when building to help diagnose build errors.
  - +BR Pod::Parser.
  - Disable 24-tex.t which does not run and does not produce any
    useful diagnostics either.


author: Dan Walsh <dwalsh@redhat.com> - 2.2.5-3
changelog:
  - Add Miroslav patch to
  - Fix previously_modified_initialize() to show modified changes properly for all selections
  Resolves: #1049977


author: Miroslav Grepl <mgrepl@redhat.com> - 2.2.5-5
changelog:
  - Remove default s0 range from semanage-login command. It is handled in seobject.py.
  Resolves:#1028106


author: Miloslav Trmač <mitr@redhat.com> - 0.110-4
changelog:
  - Make the JavaScript engine mandatory.  The polkit-js-engine package has been
    removed, main polkit package Provides:polkit-js-engine for compatibility.
  - Add Requires: polkit-pkla-compat
    Resolves: #908808


author: Miloslav Trmač <mitr@redhat.com> - 0.110-4
changelog:
  - Shut up rpmlint about Summary:
  - Build with V=1
  - Use %{_unitdir} instead of hard-coding the path
  - Use the new systemd macros, primarily to run (systemctl daemon-reload)
    Resolves: #857382


author: Miloslav Trmač <mitr@redhat.com> - 0.111-1
changelog:
  - Update to polkit-0.111
    Resolves: #917888
  - Use SpiderMonkey from mozjs17 instead of js
  - Ship the signature in the srpm
  - Try to preserve timestamps in (make install)


author: Miloslav Trmač <mitr@redhat.com> - 0.112-2
changelog:
  - Workaround pam_systemd setting broken XDG_RUNTIME_DIR
    Resolves: #1033774
  - Always use mozjs-17.0 even if js-devel is installed


author: Rex Dieter <rdieter@fedoraproject.org> 0.99.0-3
changelog:
  - patch to bring polkit auth dialog to front
  - patch restart polkit-kde on crash 
  - patch to remove unimplimented 'remember authorization' checkbox


author: Miloslav Trmač <mitr@redhat.com> - 0.1-2
changelog:
  - Add a comment above License about SRPM-only licenses
  - Reword Summary: to avoid a rpmlint warning
  - Move INSTALL= to the %install section


author: Rex Dieter <rdieter@fedoraproject.org> 0.99.0-3
changelog:
  - upstream crash patch (kde#258916,#684625)
  - pull a couple more upstream patches
  - -devel: drop Req: polkit-devel


author: Marek Kasik <mkasik@redhat.com> 0.22.5-2
changelog:
  - Add poppler-0.22.5-CVE-2013-4473.patch
      (Limit length of output to pathName buffer)
  - Add poppler-0.22.5-CVE-2013-4474.patch
      (Check file pattern)
  - Resolves: #1025160


author: Panu Matilainen <pmatilai@redhat.com> - 1.13-12
changelog:
  - Hack poptBadOption() to return something semi-meaningful on exec alias
    failures (#697435, #710267)
  - Run internal test-suite on build, minimal as it might be


author: Tim Waugh <twaugh@redhat.com> - 0.0.5-8
changelog:
  - Avoid a race during start-up if there are no configured ports (bug #1034139).
  - Moved tmpfiles configuration file to correct location.
  - Don't use %ghost in manifest for state directory, in order to make
    sure it is ready to use after installation.


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2:2.10.0-2
changelog:
  - Fixed systemd error message regarding chroot-update, patch provided
    by John Heidemann <johnh@isi.edu>
    Resolves: rhbz#917463


author: Jozef Mlich <jmlich@redhat.com> - 9.2.5-2
changelog:
  - Resolves: #1019762 
  - additionally fixes rpmdiff filelist problem with
    /usr/share/doc/postgresql-9.2.5/html/bookindex.html.orig


author: Jozef Mlich <jmlich@redhat.com> - 9.2.6-1
changelog:
  - Resolves #1038688
  - rebase to 9.2.6 see changes at
    http://www.postgresql.org/docs/9.2/static/release-9-2-6.html


author: Pavel Raiskup <praiskup@redhat.com> - 9.2.7-1
changelog:
  - update to 9.2.7 per release notes (#1065845)
    http://www.postgresql.org/docs/9.2/static/release-9-2-7.html


author: Tom Lane <tgl@redhat.com> 9.1.901-3
changelog:
  - Change BuildRequires: java-1.6.0-openjdk-devel to just java-devel.
    As of 9.1-901, upstream has support for JDBC4.1, so we don't have to
    restrict to JDK6 anymore, and Fedora is moving to JDK7
  Resolves: #796580


author: Pavel Raiskup <praiskup@redhat.com> - 9.2.1002-4
changelog:
  - don't use removed macro %add_to_maven_depmap (#992816)
  - lint: trim-lines, reuse %{name} macro, fedora-review fixes
  - merge cleanup changes by Stano Ochotnicky


author: Tom Lane <tgl@redhat.com> 09.01.0200-1
changelog:
  - Update to version 09.01.0200
  - Minor specfile cleanup per suggestions from Tom Callaway
  Related: #845110


author: <sshedmak@redhat.com> - 1.3.2-1
changelog:
  - Fixed FSType, Preferred Style, UinqueID and Fullname
  - Fixed Invalid Glyph Names reported by fontlint
  - with exceptions string added in License


author: Sandeep Shedmake <sshedmak@redhat.com> - 1.3.3-1
changelog:
  - Added Indian Rupee Sign (U+20B9)
  - Modified URL to fedorahosted.org domain
  - Updated Source0 link
  - Added BuildRequires fontforge
  - Modified doc section


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-1
changelog:
  - New version
    Resolves: rhbz#923729
  - Dropped fix-crash-on-readonly-fs, reduce-syscalls,
    gpu-wiggle-fix patches (upstreamed)
  - Dropped version-fix patch (not needed)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-5
changelog:
  - Fixed some possible unregistered parameters errors
    (by reg-net-param patch)
    Resolves: rhbz#1014662
  - Unlimit FDs (by unlimit-fds patch)
    Printed friendly error message if the system is running out
    of FDs (by fd-limit-err patch)
    Resolves: rhbz#1017668


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3-8
changelog:
  - Fixed buffer overflow in cpufreq tunables on systems with many CPUs
    (by tunable-overflow-fix patch)
    Resolves: rhbz#1080191


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-29
changelog:
  - make radius plugin config parser less strict
  - add creation of dip system group
  - resolves : #906913, #918296


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-30
changelog:
  - don't ship /var/lock/ppp in rpm payload and create it in %post instead
  - fix installation of tmpfiles.d configuration
  - enable hardened build
  - fix bogus dates in changelog
  - compile all binaries with hardening flags
  - fix possible NULL pointer dereferencing


author: Miroslav Lichvar <mlichvar@redhat.com> 0-0.7.20120407git0deb9c
changelog:
  - update to 20120407git0deb9c
  - move timepps.h to sys (#852950)
  - include license files in devel subpackage
  - remove obsolete macros


author: Paul Howarth <paul@city-fan.org> 1.7.2-13.2
changelog:
  - Add patch to fix highly-parallel build (e.g. -j16)
  - Add additional compiler warning flags to highlight questionable code
  - Add patch to fix comparisons between signed and unsigned integers
  - Add patch to fix const usage
  - Add patch to fix missing field initializers
  - Add patch to suppress warnings about possibly unused variables
  - Add patch to fix declarations that are not prototypes
  - Add patch to fix warnings about nested externs
  - Add patch to fix dubious typecasts that violate strict-aliasing rules
  - Update the FSF address references and GPLv2 license text
  - Use default optimization level (-O2) again


author: Paul Howarth <paul@city-fan.org> 1.7.2-14
changelog:
  - Build with warning-fix patches to address occasional segfaults (#749455)
  - Patches have all now been merged upstream


author: Paul Howarth <paul@city-fan.org> 1.7.2-17
changelog:
  - Add note in options.pptp about MPPE not being available in FIPS mode
    (#845112)
  - Add note in options.pptp about PPTP with MSCHAP-V2 being insecure


author: Jakub Jelinek <jakub@redhat.com> 0.5.0-3
changelog:
  - fix R_390_IRELATIVE handling on s390/s390x (#973259, #1010392, #1010398)
  - change cron.daily/prelink permissions to rwxr-x--- (#1012538)


author: Jaromir Capik <jcapik@redhat.com> - 3.3.9-5
changelog:
  - Support for timestamps & wide diskstat (#1053428, #1025833)
  - Fixing fd leak in watch
  - Fixing format-security build issues
  - Skipping trailing zeros in read_unvectored (#1057600)
  - Resolves: rhbz#1053428, Related: rhbz#1025833


author: Jaromir Capik <jcapik@redhat.com> - 6.5.5-8
changelog:
  - #759321 - psacct logrotate script references init.d service
  - #735300 - Enabling psacct causes daily cron spam


author: Richard W.M. Jones <rjones@redhat.com> 22.20-1
changelog:
  - Update to 22.20.
    Contains a fix for: http://sourceforge.net/p/psmisc/bugs/53/
  - Fix src/pstree.c when SELinux is available.


author: Jaromir Capik <jcapik@redhat.com> - 22.20-6
changelog:
  - Fixing null pointer dereference introduced with namespaces
  - Fixing bogus dates in the changelog
  - Related: rhbz#980514


author: Jiri Popelka <jpopelka@redhat.com> - 1.17-40
changelog:
  - fix dist tag and URL
  - put psutils-copyright.patch among sources as it's used only in
    psutils-remove-copyrighted-files
  - no need to define BuildRoot and clean it in %clean and %install anymore
  - %defattr no longer needed in %files


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.0.7-19
changelog:
  - Build with -D_FILE_OFFSET_BITS=64 to get stat64 in pth_high.c
  - Guard the ARM CFLAGS sed substitution.


author: Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.10.2-4
changelog:
  * Sat Aug 25 2012 Peter Robinson <pbrobinson@fedoraproject.org> - 2.10.7-1
  - New 2.10.7 stable release


author: Jeff Fearn <jfearn@redhat.com> 3.1.2-0
changelog:
  - Fix tests failing when publican not installed. BZ #908956
  - Fix broken mr-IN/Conventions.po. BZ #908956
  - Fix footnote link unclickable. BZ #909006
  - Fix missing translations for common files. BZ #908976
  - Fix using edition for version on cover pages. BZ #912180
  - Fix nested entities causing XML::TreeBuilder to fail. BZ #912187


author: Jeff Fearn <jfearn@redhat.com> 3.1.3-1
changelog:
  - Fix add_revision breaking XML parser. BZ #912985
  - Stronger fix for cover pages causing page number overrun. BZ #912967
  - Fix CSS for article front page subtile. BZ #913016


author: Jeff Fearn <jfearn@redhat.com> 3.1.4-0
changelog:
  - Fix entities in Book_Info braking build. BZ #917898
  - add translations of "Revision History". BZ #918365
  - Fix TOC title not translated in PDF. BZ #918365
  - Fix translated strings with parameters. BZ #891166
  - update translations
  - add it-IT translation of PUG via <fedora@marionline.it> BZ #797515


author: Jeff Fearn <jfearn@redhat.com> 3.2.0-0
changelog:
  - Add spaces to web-spec.xsl to work around newer libxml2 eating white space in spec files  BZ #982424
    - Fix typos in common content BZ #952490 #974918
    - Stop menu bouncing. BZ #953716
    - Fix ID missing from admonitions. BZ #966494
    - Support corpauthor for PDF. BZ #908666
    - Fix nested block tags breaking translation flow. BZ #909728
    - Fix multiple calls to update_po breaking packaging. BZ #891167
    - Add website labels and translations. BZ #979885
    - Add orgname to block/inline code. BZ #872955
    - Fix get_keywords not using correct info file. BZ #957956
    - Improve web print CSS. BZ #927513
    - Fix pre border in PDF. BZ #905752
    - Fix epub DOCTYPE. BZ #875129
    - Fix step first child style. BZ #971221
    - Fix long link word wrap in PDF. BZ #923481
    - Support case-insensitive "language" attribute. BZ #919474
    - Apply title style patch from Jaromir Hradilek. BZ #924518
    - Expose %book_ver_list to products/versions_index.tmpl. BZ #962643
    - Allow brands to ship web templates. Add site config toc_js. BZ #956935
    - Add pdftool option to build for pdf tool control. BZ #953728
    - Add default mapping for language to locale. BZ #844202
    - Fix ID missing from translated Revision History. BZ #911462
    - Add pub_dir option to override publish directory. BZ #830062
    - Removed show_unknown parameter and associated code. BZ #915428
    - Add img_dir parameter to override images directory. BZ #919481
    - Support all DocBook conditionals. BZ #919486
    - Flag spaces in product number as invalid. BZ #973895
    - Standardized prompts in commands. BZ #880456sources
    - Updated web_formats publican.cfg info BZ #839141
    - Replaced 'home page' with 'product or version page' BZ #921803
    - Replaced a broken link to CPAN with a working link BZ# 973461
    - Remove duplicate brand files from base install. BZ #966143
    - Add extras_dir parameter to override extras directory. BZ #953998
    - Fix PDF ignoring cover logo. BZ #974353
    - Add trans_drop action to freeze source language for translation. BZ #887707
    - Fix empty pot files not being deleted. BZ #961413
    - Fix long title layout on cover page in PDF. BZ #956934
    - Add Mac OS X Lion installation instructions. BZ# 979229
    - Add file handle limit workaround to FAQ BZ #952476
    - Support CDATA tags. BZ #958343
    - Fix UTF8 image names getting mangled in publish. BZ #953618
    - Add wkhtmltopdf_opts parameter to pass options to wkhtmltopdf. BZ #951290
    - Fix edition missing on PDF cover pages. BZ #956940
    - Support XML in add_revision member. BZ #862465
    - Fix duplicate footnotes in bibliography. BZ #653447
    - Fix Link from footlink to footlink-ref not working in PDF. BZ #909786
    - Fix TOC draft watermark in PDF. BZ #905271
    - Add common-db5 sub package. BZ #958495
    - Support decimals in colwidth & convert exact measures to pixels. BZ #913775
    - Tweak equation formatting. BZ #804531
    - Fix POT-Creation-Date format. BZ #985836
    - Fix site stats report swapping languages and products.
    - Fix web_dir not used for home page packages. BZ #988191
    - Updated web site instructions - BZ#979224


author: Wim Taymans <wtaymans@redhat.com> - 3.0-16
changelog:
  - Build SUID proximity-helper with full relro
  - don't mark .desktop and dbus configurations as %config
  - Related #884146


author: Wim Taymans <wtaymans@redhat.com> - 3.0-17
changelog:
  - Use the statically allocated UID and GID from /usr/share/doc/setup/uidgid (#1056656)
  - The pulse-rt group doesn't exist (#885020)
  - Related #884146


author: John (J5) Palmieri <johnp@redhat.com> - 2.28.6-2
changelog:
  - disable introspection in anticipation of pygobject3
  - https://bugzilla.redhat.com/show_bug.cgi?id=731851
  - pygobject2 now becomes legacy for static binding support (e.g. PyGTK)


author: Colin Walters <walters@redhat.com> - 2.28.6-8
changelog:
  - Add various missing BuildRequires, switch to pkgconfig() syntax
  - Backport upstream patch which fixes a crasher in some applications


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.3-1
changelog:
  - New upstream release
  - Build a python3 subpackage
  - Run the test suite even though we ignore the output


author: Miloslav Trmač <mitr@redhat.com> - 0.3-5
changelog:
  - Disable -fstrict-aliasing (see http://www.python.org/dev/peps/pep-3123/ for
    rationale)
  - Don't ship .pyc files from the test suite in %doc, to avoid multilib
    conflicts


author: Tom Lane <tgl@redhat.com> 4.0-1
changelog:
  - Update to PyGreSQL 4.0
  - Relabel license as PostgreSQL now that that's separately recognized by OSI.


author: Chris Lumens <clumens@redhat.com> - 1.99.43.3-1
changelog:
  - method getattr should default to handler.url (#1029245) (bcl)
  - Add missing version bumps for RHEL7 command control map (#1032738) (mkolman)


author: Chris Lumens <clumens@redhat.com> - 1.99.43.5-1
changelog:
  - Check VNC password length (#1056939) (vpodzime)
  - Don't do string comparisons in "make test" (#1057573). (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.99.43.6-1
changelog:
  - Run "make test" as part of the RPM build process (#1025226). (clumens)
  - Use the correct LogVolData object (#1058520). (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.99.43.7-1
changelog:
  - Include test cases in the source distribution. (clumens)
  - We need python-urlgrabber to do builds now. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.99.43.8-1
changelog:
  - Add support for fcoe --autovlan option (#1055779) (rvykydal)
  - Provide syntax for specifying environments (#1061296). (clumens)


author: Tomáš Mráz <tmraz@redhat.com> - 0.13-6
changelog:
  - Check for error returns which cause segfaults in FIPS mode
  - Fix missing error check and leak found by gcc-with-cpychecker (#800086)


author: Tomáš Mráz <tmraz@redhat.com> - 0.13.1-1
changelog:
  - new upstream release fixing a security issue with string
    formatting subjectAltName of a certificate


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.2.4-4
changelog:
  - Add conditional for sphinx on rhel.
  - Remove rhel logic from with_python3 conditional.
  - Disable failing tests for Python3.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.3.1-1
changelog:
  - Update to 2.3.1.
  - Re-enable some tests, ignore others.
  - Docs are available in English and Japanese now.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.3.5-1
changelog:
  - Update to 2.3.5.
  - Docutils needed now to build README.html.
  - Add some BR optionally used by the testsuite.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.3.5-2
changelog:
  - Use python-sphinx for rhel > 6 (rhbz#973318).
  - Update BR to use python-pexpect instead of pexpect.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.5.4-1
changelog:
  - Update to 1.5.4
  - Fix for python3 module and anydbm
  - Tried enabling unittests on python3 -- still no joy


author: Robert Kuska <rkuska@redhat.com> - 1.5.4-8
changelog:
  - Change beaker.session to use sha1 instead of md5 because of failures in fips mode
  Resolves: rhbz#996219


author: Brian C. Lane <bcl@redhat.com> - 0.18.25-1
changelog:
  - Wait for udev to create device node for new md arrays. (dlehman)
    Resolves: rhbz#1036014
  - Fix detection of thin pool with non-standard segment types. (dlehman)
    Resolves: rhbz#1029915
  - NFSDevice does not accept the exists kwarg. (dlehman)
    Resolves: rhbz#1063413
  - Don't run mpathconf for disk image installations. (dlehman)
    Resolves: rhbz#1066008


author: Brian C. Lane <bcl@redhat.com> - 0.18.26-1
changelog:
  - Add a coverage test target (amulhern)
    Resolves: rhbz#1064895
  - Disable tests in action_test.py (amulhern)
    Resolves: rhbz#1065437
  - Fix some problems with action_test.py (amulhern)
    Related: rhbz#1065437
  - Update tests/storagetestcase.py (amulhern)
    Related: rhbz#1065437
  - Skip a test if device isn't available (amulhern)
    Related: rhbz#1065431
  - Fix failing udev_test (amulhern)
    Resolves: rhbz#1065431
  - Fix some size_test.py ERRORs (amulhern)
    Resolves: rhbz#1065443
  - Filesystem labeling tests will not run without utilities (amulhern)
    Resolves: rhbz#1065422
  - Rename misc_test.py to something more descriptive (amulhern)
    Related: rhbz#1065422
  - Refactor labeling tests (amulhern)
    Related: rhbz#1065422
  - Move SwapSpace tests into a separate class (amulhern)
    Resolves: rhbz#1065422


author: Brian C. Lane <bcl@redhat.com> - 0.18.27-1
changelog:
  - Leave already-active devices up after destroying formatting. (dlehman)
    Resolves: rhbz#1064898
  - Fix partition handling across multiple processActions calls. (dlehman)
    Resolves: rhbz#1065522
  - return empty set when no matching fcoe nic (bcl)
    Resolves: rhbz#1067159
  - Include tmpfs mounts in post-install kickstart (mkolman)
    Resolves: rhbz#1061063


author: Brian C. Lane <bcl@redhat.com> - 0.18.28-1
changelog:
  - Count with the extra metadata extents for RAID consistently (vpodzime)
    Resolves: rhbz#1065737
  - Make partitioning error message more friendly (amulhern)
    Resolves: rhbz#1020388


author: Brian C. Lane <bcl@redhat.com> - 0.18.29-1
changelog:
  - Let the udev queue settle before populating the devicetree. (dlehman)
    Resolves: rhbz#1049772
  - Allow use of a single path if multipath activation fails. (dlehman)
    Resolves: rhbz#1054806


author: Brian C. Lane <bcl@redhat.com> - 0.18.30-1
changelog:
  - When copying a root, also copy hidden devices (amulhern)
    Related: rhbz#1043763
  - Add hidden flag to devicetree.getDeviceByID (amulhern)
    Resolves: rhbz#1043763
  - Only set device for mountpoint if it is not None (amulhern)
    Related: rhbz#1043763
  - Extend the list of things to be omitted if moddisk is False (amulhern)
    Related: rhbz#1043763
  - Set req_name to None at the top of initializer (amulhern)
    Related: rhbz#1043763
  - Log action cancelation (amulhern)
    Resolves: rhbz#1043763
  - Make DeviceTree.hide() remove a larger set (amulhern)
    Related: rhbz#1043763
  - Find more used devices when calculating unused devices (dlehman)
    Related: rhbz#1043763
  - Re-write the DASD storage code. (sbueno+anaconda)
    Resolves: rhbz#1001070
  - Include image install flag when updating from anaconda flags. (dlehman)
    Resolves: rhbz#1066008


author: Brian C. Lane <bcl@redhat.com> - 0.18.32-1
changelog:
  - Resolve md names in udev_resolve_devspec. (dlehman)
    Related: rhbz#1047338
  - Fix an old typo in zeroing out a PReP partition. (dlehman)
    Resolves: rhbz#1072781
  - Use container's parent's name for PV if available (vpodzime)
    Resolves: rhbz#1065737
  - Limit the LV size to VG's free space size (vpodzime)
    Related: rhbz#1072999
  - Only count with the extra metadata extents in new VGs and LVs (vpodzime)
    Resolves: rhbz#1072999


author: Brian C. Lane <bcl@redhat.com> - 0.18.33-1
changelog:
  - fcoe: add sleep for dcbtool command (rvykydal)
    Related: rhbz#1039223
  - Add a PE for LUKS metadata (bcl)
    Resolves: rhbz#1076078


author: Luke Macken <lmacken@redhat.com> - 4.7.0-2
changelog:
  - Merge a bunch of changes from Gareth Armstrong <gareth.armstrong@hp.com>
      - The src zip file should come either from http://www.voidspace.org.uk/
        downloads/ or http://code.google.com/p/configobj/ as the PyPI tarball is
        not complete.  No docs and no test code.
      - Added docs
      - Remove BR on python-setuptools-devel


author: Andy Grover <agrover@redhat.com> - 1:1.1.fb9-1
changelog:
  - New upstream release
  - Remove dependency on python-simpleparse in favor of pyparsing
  - Remove BuildRequires


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.5.3-2
changelog:
  - Patch from upstream for traceback when people use this with python2 and
    python3 in the same directory


author: Rahul Sundaram <sundaram@fedoraproject.org> - 1.5-1
changelog:
  - New upstream release
  - Fix UTF8 encoding correctly
  - Drop buildroot, clean, defattr and use macro for Source


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.9.3-1
changelog:
  -
  - New since 1.9.2:
  -
  -     A boolean parameter, 'raise_on_no_answer', has been added to
  - the query() methods.  In no-error, no-data situations, this
  - parameter determines whether NoAnswer should be raised or not.
  - If True, NoAnswer is raised.  If False, then an Answer()
  - object with a None rrset will be returned.
  -
  - Resolver Answer() objects now have a canonical_name field.
  -
  - Rdata now have a __hash__ method.
  -
  - Bugs fixed since 1.9.2:
  -
  -        Dnspython was erroneously doing case-insensitive comparisons
  - of the names in NSEC and RRSIG RRs.
  -
  - We now use "is" and not "==" when testing what section an RR
  - is in.
  -
  - The resolver now disallows metaqueries.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.9.4-1
changelog:
  -
  - dnspython 1.9.4 has been released and is available at
  - http://www.dnspython.org/kits/1.9.4/
  -
  - There is no new functionality in this release; just a few bug fixes
  - in RRSIG and SIG code.
  -
  - I will be eliminating legacy code for earlier versions of DNSSEC in a
  - future release of dnspython.


author: David Malcolm <dmalcolm@redhat.com> - 2.7.2-2
changelog:
  - fix broken link to "Global Module Index", and add a %check, verifying the
  absence of broken links (rhbz#670493)


author: David Malcolm <dmalcolm@redhat.com> - 2.7.3-2
changelog:
  - make link checking optional, to avoid needing to pull in linkchecker and
  its dependencies (rbhz#823930)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.10-0.1.20120730svn7490
changelog:
  - Update to snapshot that's supposed to take care of the date directive unicode
    problem in a different way
  - Patch to fix PyXML conflict without using rpm conflicts


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.10-0.5.20120824svn7502
changelog:
  - Rebase to new snapshot with some fixes integrated
  - Reenable one test that I can't replicate the failure with.


author: David Sommerseth <davids@redhat.com> - 0.7-1
changelog:
  - Fixed several memory leaks (commit aa2c20e697af, abc7f912f66d)
  - Improved error checking towards NULL values(commit 4e928d62a8e3)
  - Fixed typo in pethtool --help (commit 710766dc722)
  - Only open a NETLINK connection when needed (commit 508ffffbb3c)
  - Added man page for pifconfig and pethtool (commit 9f0d17aa532, rhbz#638475)
  - Force NETLINK socket to close on fork() using FD_CLOEXEC (commit 1680cbeb40e)


author: Bohuslav Kabrda <bkabrda@redhat.com> - 0.8-2
changelog:
  - Fixed reporting of more IPv4 addresses per interface
  Resolves: rhbz#1027685
  - Make get_active_devices() return IPv6-only devices, too
  Resolves: rhbz#1027678


author: Matt Domsch <mdomsch@fedoraproject.org> - 0.70-1
changelog:
  - Version 0.70 (2009-10-29)
    * New "major" version because it may break compatibility
    * Fix __cmp__(): IP('0.0.0.0/0') and IP('0.0.0.0') are not equal
    * Fix IP.net() of the network "::/0": "::" instead of "0.0.0.0".
      IPy 0.63 should fix this bug, but it wasn't.


author: Matt Domsch <mdomsch@fedoraproject.org> - 0.75-1
changelog:
  - Version 0.75 (2011-04-12)
   * IP('::/0').netmask() gives IP('::') instead of IP('0.0.0.0') (BZ#690625)
   * Fix tests for Python 3.1 and 3.2
   * ip.__nonzero__() and (ipa in ipb) return a bool instead of 0 or 1
   * IP('0.0.0.0/0') + IP('0.0.0.0/0') raises an error, fix written by Arfrever
   * Support Python 3: setup.py runs 2to3
   * Update the ranges for IPv6 IPs
   * Fix reverseName() and reverseNames() for IPv4 in IPv6 addresses
   * Drop support of Python < 2.5
   * Include examples and MANIFEST.in in source build (add them to MANIFEST.in)
   * Remove __rcsid__ constant from IPy module
   * Use xrange() instead of range()
   * Use isinstance(x, int) instead of type(x) == types.IntType
   * Prepare support of Python3 (use integer division: x // y)
   * Fix IP(long) constructor: ensure that the address is not too large
   * Constructor raise a TypeError if the type is not int, long, str or unicode
   * 223.0.0.0/8 is now public (belongs to APNIC)


author: Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.2-1
changelog:
  - Reverted flawed patch for #1051427 (this reintroduces #1052102).
  - Spec cleanup (removed rhel < 7 specific stuff).
  - Update to 2.7.2.
  Resolves: rhbz#1052777


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.2.4-1
changelog:
  - Upstream update 0.2.4
    - Changes i18n.easy_gettext_setup() to return lgettext functions when
      byte strings are requested.


author: Mike Bonnet <mikeb@redhat.com> - 1.0.90-1
changelog:
  - return the contents of the AP_REP message from rd_rep()
  - improved memory handling
  - removed use of KRB_PRIVATE


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.5-1
changelog:
  - Bugs fixed
  -
  -  * Crash when merging text nodes in element.remove().
  -  * Crash in sax/target parser when reporting empty doctype.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0-1
changelog:
  - 3.0 (2012-10-08)
  - ================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * End-of-file handling was incorrect in iterparse() when reading from
  -   a low-level C file stream and failed in libxml2 2.9.0 due to its
  -   improved consistency checks.
  -
  - Other changes
  - -------------
  -
  - * The build no longer uses Cython by default unless the generated C files
  -   are missing.  To use Cython, pass the option "--with-cython".  To ignore
  -   the fatal build error when Cython is required but not available (e.g. to
  -   run special setup.py commands that do not actually run a build), pass
  -   "--without-cython".
  -
  -
  - 3.0beta1 (2012-09-26)
  - =====================
  -
  - Features added
  - --------------
  -
  - * Python level access to (optional) libxml2 memory debugging features
  -   to simplify debugging of memory leaks etc.
  -
  - Bugs fixed
  - ----------
  -
  - * Fix a memory leak in XPath by switching to Cython 0.17.1.
  -
  - * Some tests were adapted to work with PyPy.
  -
  - Other changes
  - -------------
  -
  - * The code was adapted to work with the upcoming libxml2 2.9.0 release.
  -
  -
  - 3.0alpha2 (2012-08-23)
  - ======================
  -
  - Features added
  - --------------
  -
  - * The .iter() method of elements now accepts tag arguments like "{*}name"
  -   to search for elements with a given local name in any namespace.  With
  -   this addition, all combinations of wildcards now work as expected:
  -   "{ns}name", "{}name", "{*}name", "{ns}*", "{}*" and "{*}*".  Note that
  -   "name" is equivalent to "{}name", but "*" is "{*}*".  The same change
  -   applies to the .getiterator(), .itersiblings(), .iterancestors(),
  -   .iterdescendants(), .iterchildren() and .itertext() methods,  the
  -   strip_attributes(), strip_elements() and strip_tags() functions as well
  -   as the iterparse() function.
  -
  - * C14N allows specifying the inclusive prefixes to be promoted to
  -   top-level during exclusive serialisation.
  -
  - Bugs fixed
  - ----------
  -
  - * Passing long Unicode strings into the feed() parser interface failed to
  -   read the entire string.
  -
  - Other changes
  - -------------
  -
  -
  - 3.0alpha1 (2012-07-31)
  - ======================
  -
  - Features added
  - --------------
  -
  - * Initial support for building in PyPy (through cpyext).
  -
  - * DTD objects gained an API that allows read access to their
  -   declarations.
  -
  - * xpathgrep.py gained support for parsing line-by-line (e.g.
  -   from grep output) and for surrounding the output with a new root
  -   tag.
  -
  - * E-factory in lxml.builder accepts subtypes of known data
  -   types (such as string subtypes) when building elements around them.
  -
  - * Tree iteration and iterparse() with a selective tag
  -   argument supports passing a set of tags.  Tree nodes will be
  -   returned by the iterators if they match any of the tags.
  -
  - Bugs fixed
  - ----------
  -
  - * The .find*() methods in lxml.objectify no longer use XPath
  -   internally, which makes them faster in many cases (especially when
  -   short circuiting after a single or couple of elements) and fixes
  -   some behavioural differences compared to lxml.etree.  Note that
  -   this means that they no longer support arbitrary XPath expressions
  -   but only the subset that the ElementPath language supports.
  -   The previous implementation was also redundant with the normal
  -   XPath support, which can be used as a replacement.
  -
  - * el.find('*') could accidentally return a comment or processing
  -   instruction that happened to be in the wrong spot.  (Same for the
  -   other .find*() methods.)
  -
  - * The error logging is less intrusive and avoids a global setup where
  -   possible.
  -
  - * Fixed undefined names in html5lib parser.
  -
  - * xpathgrep.py did not work in Python 3.
  -
  - * Element.attrib.update() did not accept an attrib of
  -   another Element as parameter.
  -
  - * For subtypes of ElementBase that make the .text or .tail
  -   properties immutable (as in objectify, for example), inserting text
  -   when creating Elements through the E-Factory feature of the class
  -   constructor would fail with an exception, stating that the text
  -   cannot be modified.
  -
  - Other changes
  - --------------
  -
  - * The code base was overhauled to properly use 'const' where the API
  -   of libxml2 and libxslt requests it.  This also has an impact on the
  -   public C-API of lxml itself, as defined in etreepublic.pxd, as
  -   well as the provided declarations in the lxml/includes/ directory.
  -   Code that uses these declarations may have to be adapted.  On the
  -   plus side, this fixes several C compiler warnings, also for user
  -   code, thus making it easier to spot real problems again.
  -
  - * The functionality of "lxml.cssselect" was moved into a separate PyPI
  -   package called "cssselect".  To continue using it, you must install
  -   that package separately.  The "lxml.cssselect" module is still
  -   available and provides the same interface, provided the "cssselect"
  -   package can be imported at runtime.
  -
  - * Element attributes passed in as an attrib dict or as keyword
  -   arguments are now sorted by (namespaced) name before being created
  -   to make their order predictable for serialisation and iteration.
  -   Note that adding or deleting attributes afterwards does not take
  -   that order into account, i.e. setting a new attribute appends it
  -   after the existing ones.
  -
  - * Several classes that are for internal use only were removed
  -   from the lxml.etree module dict:
  -   _InputDocument, _ResolverRegistry, _ResolverContext, _BaseContext,
  -   _ExsltRegExp, _IterparseContext, _TempStore, _ExceptionContext,
  -   __ContentOnlyElement, _AttribIterator, _NamespaceRegistry,
  -   _ClassNamespaceRegistry, _FunctionNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _ParserContext, _PythonSaxParserTarget,
  -   _TargetParserContext, _ReadOnlyProxy, _ReadOnlyPIProxy,
  -   _ReadOnlyEntityProxy, _ReadOnlyElementProxy, _OpaqueNodeWrapper,
  -   _OpaqueDocumentWrapper, _ModifyContentOnlyProxy,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _SaxParserContext, _FilelikeWriter,
  -   _ParserSchemaValidationContext, _XPathContext,
  -   _XSLTResolverContext, _XSLTContext, _XSLTQuotedStringParam
  -
  - * Several internal classes can no longer be inherited from:
  -   _InputDocument, _ResolverRegistry, _ExsltRegExp, _ElementUnicodeResult,
  -   _IterparseContext, _TempStore, _AttribIterator, _ClassNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _PythonSaxParserTarget, _TargetParserContext,
  -   _ReadOnlyPIProxy, _ReadOnlyEntityProxy, _OpaqueDocumentWrapper,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _FilelikeWriter, _ParserSchemaValidationContext,
  -   _XPathContext, _XSLTResolverContext, _XSLTContext,
  -   _XSLTQuotedStringParam, _XSLTResultTree, _XSLTProcessingInstruction


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0.1-1
changelog:
  - 3.0.1 (2012-10-14)
  - Bugs fixed
  -
  -  * LP#1065924: Element proxies could disappear during garbage collection
  -    in PyPy without proper cleanup.
  -  * GH#71: Failure to work with libxml2 2.6.x.
  -  * LP#1065139: static MacOS-X build failed in Py3.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.1.0-1
changelog:
  - 3.1.0 (2013-02-10)
  - ==================
  -
  - Features added
  - --------------
  -
  - * GH#89: lxml.html.clean allows overriding the set of attributes that it
  -   considers 'safe'.  Patch by Francis Devereux.
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1104370: ``copy.copy(el.attrib)`` raised an exception.  It now returns
  -   a copy of the attributes as a plain Python dict.
  -
  - * GH#95: When used with namespace prefixes, the  ``el.find*()`` methods
  -   always used the first namespace mapping that was provided for each
  -   path expression instead of using the one that was actually passed
  -   in for the current run.
  -
  - * LP#1092521, GH#91: Fix undefined C symbol in Python runtimes compiled
  -   without threading support.  Patch by Ulrich Seidl.
  -
  - Other changes
  - -------------
  -
  -
  - 3.1beta1 (2012-12-21)
  - =====================
  -
  - Features added
  - --------------
  -
  - * New build-time option ``--with-unicode-strings`` for Python 2 that
  -   makes the API always return Unicode strings for names and text
  -   instead of byte strings for plain ASCII content.
  -
  - * New incremental XML file writing API ``etree.xmlfile()``.
  -
  - * E factory in lxml.objectify is callable to simplify the creation of
  -   tags with non-identifier names without having to resort to getattr().
  -
  - Bugs fixed
  - ----------
  -
  - * When starting from a non-namespaced element in lxml.objectify, searching
  -   for a child without explicitly specifying a namespace incorrectly found
  -   namespaced elements with the requested local name, instead of restricting
  -   the search to non-namespaced children.
  -
  - * GH#85: Deprecation warnings were fixed for Python 3.x.
  -
  - * GH#33: lxml.html.fromstring() failed to accept bytes input in Py3.
  -
  - * LP#1080792: Static build of libxml2 2.9.0 failed due to missing file.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``_ObjectifyElementMakerCaller`` was
  -   removed from the module API of lxml.objectify.
  -
  - * LP#1075622: lxml.builder is faster for adding text to elements with
  -   many children.  Patch by Anders Hammarquist.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.0-1
changelog:
  - 3.2.0 (2013-04-28)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#690319: Leading whitespace could change the behaviour of the string
  -   parsing functions in ``lxml.html``.
  -
  - * LP#599318: The string parsing functions in ``lxml.html`` are more robust
  -   in the face of uncommon HTML content like framesets or missing body tags.
  -   Patch by Stefan Seelmann.
  -
  - * LP#712941: I/O errors while trying to access files with paths that
  -   contain non-ASCII characters could raise ``UnicodeDecodeError`` instead
  -   of properly reporting the ``IOError``.
  -
  - * LP#673205: Parsing from in-memory strings disabled network access in the
  -   default parser and made subsequent attempts to parse from a URL fail.
  -
  - * LP#971754: lxml.html.clean appends 'nofollow' to 'rel' attributes instead
  -   of overwriting the current value.
  -
  - * LP#715687: lxml.html.clean no longer discards scripts that are explicitly
  -   allowed by the user provided whitelist.  Patch by Christine Koppelt.
  -
  - 3.1.2 (2013-04-12)
  - ==================
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1136509: Passing attributes through the namespace-unaware API of
  -   the sax bridge (i.e. the ``handler.startElement()`` method) failed
  -   with a ``TypeError``.  Patch by Mike Bayer.
  -
  - * LP#1123074: Fix serialisation error in XSLT output when converting
  -   the result tree to a Unicode string.
  -
  - * GH#105: Replace illegal usage of ``xmlBufLength()`` in libxml2 2.9.0
  -   by properly exported API function ``xmlBufUse()``.
  -
  - 3.1.1 (2013-03-29)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1160386: Write access to ``lxml.html.FormElement.fields`` raised
  -   an AttributeError in Py3.
  -
  - * Illegal memory access during cleanup in incremental xmlfile writer.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``lxml.etree._BaseParser`` was removed
  -   from the module dict.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.1-1
changelog:
  - 3.2.1 (2013-05-11)
  - ==================
  -
  - Features added
  - --------------
  -
  - * The methods ``apply_templates()`` and ``process_children()`` of XSLT
  -   extension elements have gained two new boolean options ``elements_only``
  -   and ``remove_blank_text`` that discard either all strings or
  -   whitespace-only strings from the result list.
  -
  - Bugs fixed
  - ----------
  -
  - * When moving Elements to another tree, the namespace cleanup mechanism
  -   no longer drops namespace prefixes from attributes for which it finds
  -   a default namespace declaration, to prevent them from appearing as
  -   unnamespaced attributes after serialisation.
  -
  - * Returning non-type objects from a custom class lookup method could lead
  -   to a crash.
  -
  - * Instantiating and using subtypes of Comments and ProcessingInstructions
  -   crashed.


author: Honza Horak <hhorak@redhat.com> - 0.17-70
changelog:
  - Minor spec file changes
  - Use new systemd macros (Resolves: #850302)
  - Use systemd notify messages


author: Honza Horak <hhorak@redhat.com> - 0.17-77
changelog:
  - Free already alocated memory when parsing of RPC request failed
  - Require systemd instead of systemd-units
  - Remove SysV init converting


author: pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-8
changelog:
  - Update fontconfig patch to apply issue found by upstream
  - Update fontconfig patch to apply issue with missing afm fonts (#896182)


author: pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-10
changelog:
  - Use stix fonts avoid problems with missing cm fonts (#908717)
  - Correct type mismatch in python3 font_manager (#912843, #928326)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.18-1
changelog:
  - Handle tracebacks with no stack (#866441) (vpodzime)
  - Parse component name correctly (#866526) (vpodzime)
  - Spelling corrections (#865993) (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.19-1
changelog:
  - Add test for handling unicode strings and files (vpodzime)
  - Read files as UTF-8 and ignore errors (#874250) (vpodzime)
  - Add %check section to the spec file (vpodzime)
  - Fix tests (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.21-1
changelog:
  - New purely textual text interface (vpodzime)
  - Add dumb enableNetwork implementation to GraphicalIntf (vpodzime)
  - Destroy main window after running it (vpodzime)
  - Get rid of the accountManager and use new libreport API (vpodzime)
  - Add a way to override previously registered callback (vpodzime)
  - Allow callbacks marked as attachment only (vpodzime)
  - Add support for callbacks providing additional data (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.22-1
changelog:
  - Some more stuff for ABRT/libreport (#929181) (vpodzime)
  - Tell ABRT we are reporting a Python excetion (vpodzime)
  - Use named tuples instead of our magic tuples (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.23-1
changelog:
  - Use Sphinx syntax for docstrings (vpodzime)
  - Allow a change of the I/O functions (vpodzime)
  - Reword the 'Debug' button warning (#948256) (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.25-1
changelog:
  - Add and use the safe_string module and the SafeStr class (vpodzime)
  - Give translators hint about the cryptic strings (vpodzime)


author: John Eckersberg <jeckersb@redhat.com> - 0.7.5-1
changelog:
  - New upstream release 0.7.5
  - Updated summary and description to match upstream README
  - Updated URL and source to reflect upstream move to github


author: Jakub Hrozek <jhrozek@redhat.com> - 0.7.5-3
changelog:
  - Do not traceback on invalid IPNetwork input (upstream issues #2, #6, #5, #8)
  - Remove executable bit from documentation files to make rpmlint happy


author: David Malcolm <dmalcolm@redhat.com> - 1.1.2-5
changelog:
  - rebuild for https://fedoraproject.org/wiki/Features/Python_3.3
  - disable selftests that fail under 3.3


author: John Dennis <jdennis@redhat.com> - 0.12-2
changelog:
  - add patch python-nss-0.12-rsapssparams.patch to fix build problem
    which appears only with nss 3.13 and later.


author: John Dennis <jdennis@redhat.com> - 0.13-0
changelog:
  - Update to version 0.13
    Introduced in 0.13:

    * Fix NSS SECITEM_CompareItem bug via workaround.

    * Fix incorrect format strings in PyArg_ParseTuple* for:
      - GeneralName
      - BasicConstraints
      - cert_x509_key_usage

    * Fix bug when decoding certificate BasicConstraints extension

    * Fix hang in setup_certs.

    * For NSS >= 3.13 support CERTDB_TERMINAL_RECORD

    * You can now query for a specific certificate extension
      Certficate.get_extension()

    * The following classes were added:
      - RSAGenParams

    * The following class methods were added:
      - nss.nss.Certificate.get_extension
      - nss.nss.PK11Slot.generate_key_pair
      - nss.nss.DSAPublicKey.format
      - nss.nss.DSAPublicKey.format_lines

    * The following module functions were added:
      - nss.nss.pub_wrap_sym_key

    * The following internal utilities were added:
      - PyString_UTF8
      - SecItem_new_alloc()

    * The following class constructors were modified to accept
      intialization parameters

      - KEYPQGParams (DSA generation parameters)

    * The PublicKey formatting (i.e. format_lines) was augmented
      to format DSA keys (formerly it only recognized RSA keys).

    * Allow lables and values to be justified when printing objects

    * The following were deprecated:
      - nss.nss.make_line_pairs (replaced by nss.nss.make_line_fmt_tuples)

      Deprecated Functionality:
      -------------------------
      - make_line_pairs() has been replaced by make_line_fmt_tuples()
        because 2-valued tuples were not sufficently general. It is
        expected very few programs will have used this function, it's mostly
        used internally but provided as a support utility.


author: John Dennis <jdennis@redhat.com> - 0.14-1
changelog:
  External Changes:
    -----------------

    The primary enhancements in this version is support of certifcate
    validation, OCSP support, and support for the certificate "Authority
    Information Access" extension.

    Enhanced certifcate validation including CA certs can be done via
    Certificate.verify() or Certificate.is_ca_cert(). When cert
    validation fails you can now obtain diagnostic information as to why
    the cert failed to validate. This is encapsulated in the
    CertVerifyLog class which is a iterable collection of
    CertVerifyLogNode objects. Most people will probablby just print the
    string representation of the returned CertVerifyLog object. Cert
    validation logging is handled by the Certificate.verify() method.
    Support has also been added for the various key usage and cert type
    entities which feature prominently during cert validation.


    * Certificate() constructor signature changed from

      Certificate(data=None, der_is_signed=True)

      to

      Certificate(data, certdb=cert_get_default_certdb(), perm=False, nickname=None)

      This change was necessary because all certs should be added to the
      NSS temporary database when they are loaded, but earlier code
      failed to to that. It's is not likely that an previous code was
      failing to pass initialization data or the der_is_signed flag so
      this change should be backwards compatible.

    * Fix bug #922247, PKCS12Decoder.database_import() method. Importing into
      a NSS database would sometimes fail or segfault.

    * Error codes and descriptions were updated from upstream NSPR & NSS.

    * The password callback did not allow for breaking out of a password
      prompting loop, now if None is returned from the password callback
      the password prompting is terminated.

    * nss.nss_shutdown_context now called from InitContext destructor,
      this assures the context is shutdown even if the programmer forgot
      to. It's still best to explicitly shut it down, this is just
      failsafe.

    * Support was added for shutdown callbacks.

    * The following classes were added:
      - nss.CertVerifyLogNode
      - nss.CertVerifyLog
      - error.CertVerifyError (exception)
      - nss.AuthorityInfoAccess
      - nss.AuthorityInfoAccesses


    * The following class methods were added:
      - nss.Certificate.is_ca_cert
      - nss.Certificate.verify
      - nss.Certificate.verify_with_log
      - nss.Certificate.get_cert_chain
      - nss.Certificate.check_ocsp_status
      - nss.PK11Slot.list_certs
      - nss.CertVerifyLogNode.format_lines
      - nss.CertVerifyLog.format_lines
      - nss.CRLDistributionPts.format_lines

    * The following class properties were added:
      - nss.CertVerifyLogNode.certificate
      - nss.CertVerifyLogNode.error
      - nss.CertVerifyLogNode.depth
      - nss.CertVerifyLog.count

    * The following module functions were added:
      - nss.x509_cert_type
      - nss.key_usage_flags
      - nss.list_certs
      - nss.find_certs_from_email_addr
      - nss.find_certs_from_nickname
      - nss.nss_get_version
      - nss.nss_version_check
      - nss.set_shutdown_callback
      - nss.get_use_pkix_for_validation
      - nss.set_use_pkix_for_validation
      - nss.enable_ocsp_checking
      - nss.disable_ocsp_checking
      - nss.set_ocsp_cache_settings
      - nss.set_ocsp_failure_mode
      - nss.set_ocsp_timeout
      - nss.clear_ocsp_cache
      - nss.set_ocsp_default_responder
      - nss.enable_ocsp_default_responder
      - nss.disable_ocsp_default_responder

    * The following files were added:
        src/py_traceback.h
        doc/examples/verify_cert.py
        test/test_misc.py

    * The following constants were added:
      - nss.KU_DIGITAL_SIGNATURE
      - nss.KU_NON_REPUDIATION
      - nss.KU_KEY_ENCIPHERMENT
      - nss.KU_DATA_ENCIPHERMENT
      - nss.KU_KEY_AGREEMENT
      - nss.KU_KEY_CERT_SIGN
      - nss.KU_CRL_SIGN
      - nss.KU_ENCIPHER_ONLY
      - nss.KU_ALL
      - nss.KU_DIGITAL_SIGNATURE_OR_NON_REPUDIATION
      - nss.KU_KEY_AGREEMENT_OR_ENCIPHERMENT
      - nss.KU_NS_GOVT_APPROVED
      - nss.PK11CertListUnique
      - nss.PK11CertListUser
      - nss.PK11CertListRootUnique
      - nss.PK11CertListCA
      - nss.PK11CertListCAUnique
      - nss.PK11CertListUserUnique
      - nss.PK11CertListAll
      - nss.certUsageSSLClient
      - nss.certUsageSSLServer
      - nss.certUsageSSLServerWithStepUp
      - nss.certUsageSSLCA
      - nss.certUsageEmailSigner
      - nss.certUsageEmailRecipient
      - nss.certUsageObjectSigner
      - nss.certUsageUserCertImport
      - nss.certUsageVerifyCA
      - nss.certUsageProtectedObjectSigner
      - nss.certUsageStatusResponder
      - nss.certUsageAnyCA
      - nss.ocspMode_FailureIsVerificationFailure
      - nss.ocspMode_FailureIsNotAVerificationFailure

    * cert_dump.py extended to print NS_CERT_TYPE_EXTENSION

    * cert_usage_flags, nss_init_flags now support optional repr_kind parameter

    Internal Changes:
    -----------------

    * Reimplement exception handling
      - NSPRError is now derived from StandardException instead of
        EnvironmentError. It was never correct to derive from
        EnvironmentError but was difficult to implement a new subclassed
        exception with it's own attributes, using EnvironmentError had
        been expedient.

      - NSPRError now derived from StandardException, provides:
        * errno (numeric error code)
        * strerror (error description associated with error code)
        * error_message (optional detailed message)
        * error_code (alias for errno)
        * error_desc (alias for strerror)

      - CertVerifyError derived from NSPRError, extends with:
        * usages (bitmask of returned usages)
        * log (CertVerifyLog object)

    * Expose error lookup to sibling modules

    * Use macros for bitmask_to_list functions to reduce code
      duplication and centralize logic.

    * Add repr_kind parameter to cert_trust_flags_str()

    * Add support for repr_kind AsEnumName to bitstring table lookup.

    * Add cert_type_bitstr_to_tuple() lookup function

    * Add PRTimeConvert(), used to convert Python time values
      to PRTime, centralizes conversion logic, reduces duplication

    * Add UTF8OrNoneConvert to better handle unicode parameters which
      are optional.

    * Add Certificate_summary_format_lines() utility to generate
      concise certificate identification info for output.

    * Certificate_new_from_CERTCertificate now takes add_reference parameter
      to properly reference count certs, should fix shutdown busy problems.

    * Add print_traceback(), print_cert() debugging support.


author: John Dennis <jdennis@redhat.com> - 0.14.0-2
changelog:
  - resolves: bug#1002589
  - resolves: bug#1003979

  - Rewrite setup_certs.py. No longer behaves like an expect script
    which was fragile. By default now creates a sql style database.
  - By default all examples & tests use new sql format for NSS database
  - db-name is now used instead of dbdir to provide distinction between
    the database directory and it's scheme (e.g. 'sql:')
  - all examples and tests now default db-name to 'sql:pki'
  - replaced legacy getopt & optparse command line argument handling
    with modern argparse.


author: John Dennis <jdennis@redhat.com> - 0.14.0-3
changelog:
  - resolves: bug#1003979
  - In coordination with QE with regards to bz 1019934 it was requested
    the unittest patches be enhanced with a more robust version of
    test_pkcs12, no actual bug, just better testing.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.5.1-3
changelog:
  - Ugh.  Enable unittests and make a note that the python3 module is totally
    non-functional.  Open a bug for that for the actual package maintainers to
    make a decision on.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.5.1-4.20111221hg1498
changelog:
  - Tarball is missing files, use a snapshot to get those files and also pick up
    several bug fixes (one related to serving CGI scripts, another for http
    Continue requests, and a third regarding digest authentication and internet
    explorer)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.0.0-7.gitd1c6db8
changelog:
  - Remove Obsoletes in the python-pillow-qt subpackage. Obsoletes isn't
    appropriate since qt support didn't exist in the previous python-pillow
    package so there's no reason to drag in python-pillow-qt when updating
    python-pillow.


author: Roman Rakus <rrakus@redhat.com> - 2.0.0-12
changelog:
  - Mark doc subpackage arch dependent. Docs are built depending on supported
    features, which are different across archs.
    Resolves: rhbz#987839


author: Devrim Gündüz <devrim@gunduz.org> 2.5-1
changelog:
  - Update to 2.5, per changes described at:
    http://www.psycopg.org/psycopg/articles/2013/04/07/psycopg-25-released/


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.4.14-2
changelog:
  - Use python-sphinx for rhel > 6 (rhbz#973321).
  - Update URL.
  - Fix changelog entry with an incorrect date (rhbz#973325).


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 0.1.6-1
changelog:
  - update to upstream release 0.1.6
  - update modules to 0.0.4
  - update description
  - add python3-pyasn1 subpackage
  - add versioned Requires for the module subpackages
  - add %check section


author: Kamil Dudka <kdudka@redhat.com> - 7.19.0-15
changelog:
  - allow to return -1 from the write callback (#857875) 
  - remove the patch for curl-config --static-libs no longer needed
  - run the tests against the just built pycurl, not the system one


author: Steve Milner <smilner@fedoraproject.org> - 1.4-1
changelog:
  - update for upstream release
  - Add python2.6 support done by Steve Traylen <steve.traylen@cern.ch>. BZ#662755.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.4-2
changelog:
  - Fix python main package having dependencies for the python2.6 subpackage
  - Fix places that used the default python instead of python26
  - Attempt to make byte compilation more robust in case we add python3 to EPEL5
  - Run unittests on python3 in F15+


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.14.1-4
changelog:
  - Let brp_python_bytecompile run again, take care of the non-python{2,3} modules
    by removing them from the python{,3}-requests package that they did not belong
    in.
  - Use the certificates in the ca-certificates package instead of the bundled one
    + https://bugzilla.redhat.com/show_bug.cgi?id=904614
  - Fix a problem with cookie handling
    + https://bugzilla.redhat.com/show_bug.cgi?id=906924


author: Ralph Bean <rbean@redhat.com> - 1.1.0-1
changelog:
  - Latest upstream.
  - Relicense to ASL 2.0 with upstream.
  - Removed cookie handling patch (fixed in upstream tarball).
  - Updated cert unbundling patch to match upstream.
  - Added check section, but left it commented out for koji.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-2
changelog:
  - Unbundled python-charade/chardet.  Using system python-chardet now.
  - Removed deprecated comments and actions against oauthlib unbundling.
    Those are no longer necessary in 1.1.0.
  - Added links to bz tickets over Patch declarations.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-3
changelog:
  - Unbundled python-urllib3.  Using system python-urllib3 now.
  - Conditionally include python-ordereddict for el6.


author: ckozak <ckozak@redhat.com>
changelog:
  - 1006748: replace simplejson with 'ourjson' (alikins@redhat.com)
  - Log the new requestUuid from candlepin if it is present in the response.
    (dgoodwin@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.6-1
changelog:
  - Fix a crash that occurs when rhsm.conf is missing (ckozak@redhat.com)
  - Correct implementation of __eq__ for Content objects. (awood@redhat.com)
  - Log ca_dir and loaded ca pems on one line. (alikins@redhat.com)
  - Add default full_refresh_on_yum option. (awood@redhat.com)
  - Send empty JSON list when deleting all overrides. (awood@redhat.com)
  - Add __hash__ method to Content classes. (awood@redhat.com)
  - Add method to get all content overrides for a consumer (mstead@redhat.com)
  - Add methods to set and delete content overrides. (awood@redhat.com)
  - 1008808: json ValueErrors have no .msg attribute (alikins@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.9-1
changelog:
  - Removing entitlement cert and key from getEntitlementList (ckozak@redhat.com)
  - respect http(s)_proxy env variable for proxy information (jesusr@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.12-2
changelog:
  - Add attributes for brand_name (alikins@redhat.com)
  - updated tito.props (ckozak@redhat.com)
  - removed other releasers (ckozak@redhat.com)


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.2-1
changelog:
  - Add get_priority_{min,max} methods
  - Add constants for SCHED_{BATCH,FIFO,OTHER,RR}
  - Implement get_priority method
  - Add pchrt utility for testing the bindings, chrt clone
  - Add ptaskset utility for testing the bindings, taskset clone


author: Bohuslav Kabrda <bkabrda@redhat.com> - 0.8-1
changelog:
  - Switch source from distribute to setuptools, that are now uptodate and supported.
  - Update to setuptools 0.8.0.
  - Specfile cleanup (unnecessary Python 3 logic, old RPM stuff, bogus changelog dates)


author: Nils Philippsen <nils@redhat.com> - 0.2.17-1
changelog:
  - fix default timeouts of None in bus objects (#716620)
  - reduce proxy method calling overhead a bit more


author: Nils Philippsen <nils@redhat.com> - 0.2.19-1
changelog:
  - allow service object methods to be called locally
  - preserve signature, docstrings, etc. of decorated methods


author: Nils Philippsen <nils@redhat.com> - 0.4.0-1
changelog:
  - version 0.4.0:
    - get rid of (ancient) PolicyKit-0.x support
    - add basic (experimental, unstable) dbus introspection support
    - learn to cope with polkitd being restarted


author: jortel <jortel@redhat.com> - 0.3.7-1
changelog:
  - Better soap header support
  - Added new transport HttpAuthenticated for active (not passive) basic authentication.
  - New options (prefixes, timeout, retxml)
  - WSDL processing enhancements.
  - Expanded builtin XSD type support.
  - Fixed <xs:iniclude/>
  - Better XML date/datetime conversion.
  - Client.clone() method added for lightweight copy of client object.
  - XSD processing fixes/enhancements.
  - Better <simpleType/> by <xs:restriction/> support.
  - Performance enhancements. 
  - Fixed tickets: #65, #232, #233, #235, #241, #242, #244, #247, #254, #254, #256, #257, #258


author: jortel <jortel@redhat.com> - 0.3.8-1
changelog:
  - Includeds Windows NTLM Transport.
  - Add missing self.messages in Client.clone().
  - Changed default behavior for WSDL PartElement to be optional.
  - Add support for services/ports defined without <address/> element in WSDL.
  - Fix sax.attribute.Element.attrib() to find by name only when ns is not specified; renamed to Element.getAttribute().
  - Update HttpTransport to pass timeout parameter to urllib2 open() methods when supported by urllib2.
  - Add null class to pass explicit NULL values for parameters and optional elements.
  - Soap encoded array (soap-enc:Array) enhancement for rpc/encoded.
    Arrays passed as python arrays - works like document/literal now.
    No more using the factory to create the Array.
    Automatically includes arrayType attribute.  Eg: soap-enc:arrayType="Array[2]".
    Reintroduced ability to pass complex (objects) using python dict instead of suds object via factory.
  - Fixed tickets: #84, #261, #262, #263, #265, #266, #278, #280, #282.


author: jortel <jortel@redhat.com> - 0.3.9-1
changelog:
  - Bumped python requires to 2.4
  - Replaced stream-based caching in the transport package with document-based caching.
  - Caches pickled Document objects instead of XML text. 2x Faster!
  - No more SAX parsing exceptions on damaged or incomplete cached files. 
  - Cached WSDL objects. Entire Definitions object including contained Schema object cached via pickle.
  - Copy of soap encoding schema packaged with suds.
  - Refactor Transports to use ProxyHandler instead of urllib2.Request.set_proxy().
  - Added WSSE enhancements <Timestamp/> and <Expires/> support. See: Timestamp token. 
  - Fixed Tickets: #256, #291, #294, #295, #296


author: jortel <jortel@redhat.com> - 0.4-1
changelog:
  - Fix spelling errors in spec description.
  - Fix source0 URL warning.
  - Updated caching to not cache intermediate wsdls.
  - Added DocumentCache which caches verified XML documents as text. User can choose.
  - Added cachingpolicy option to allow user to specify whether to cache XML documents or the WSDL object.
  - Provided for repeating values in reply for message parts consistent with way handled in nested objects.
  - Added charset=utf-8 to stock content-type http header.
  - Added <?xml version="1.0" encoding="UTF-8"?> to outgoing SOAP messages.
  - Detection of faults in successful (http=200) replies and raise WebFault. Search for <soapenv:Fault/>.
  - Add plugins facility. 
  - Fixed Tickets: #251, #313, #314, #334


author: Thomas Spura <tomspur@fedoraproject.org> - 2.2.1-1
changelog:
  - update to upstream release 2.2.1 (fixes CVE-2012-2374)
  - fix typo for epel6 macro bug #822972 (Florian La Roche)


author: Julian Sikorski <belegdol@fedoraproject.org> - 11.1.0-1
changelog:
  - Updated to 11.1.0
  - Obsoleted zsh subpackage (upstream ticket #3078)
  - mktap is gone (upstream ticket #5293)
  - Dropped obsolete Group, Buildroot, %clean and %defattr


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-29
changelog:
  - Update to latest HEAD.
  - Fix parsing of FTP 213 responses
  - Switch to max_connections=1 after timing out.  BZ 853432
  - max_connections=0 should imply the default limit.


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-30
changelog:
  - Update to latest HEAD.
  - add ftp_disable_epsv option. BZ 849177
  - Spelling fixes.
  - docs: throttling is per-connection, suggest max_connections=1. BZ 998263
  - More robust "Content-Length" parsing. BZ 1000841


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-31
changelog:
  - Update to latest HEAD.
  - Switch to max_connections=1 after refused connect. BZ 853432
  - Never display negative downloading speed. BZ 1001767
  - clamp timestamps from the future.  BZ 894630, 1013733


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-32
changelog:
  - Update to latest HEAD.
  - Fix traceback when entering single-connection mode with DEBUG off
  - Fix traceback when limit==None and DEBUG is on
  - Fix the condition to enter single-connection mode


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.10-0
changelog:
  - clamp timestamps from the future.  BZ 894630, 1013733
  - Fix the condition to enter single-connection mode. BZ 853432
  - Fix unit tests


author: Ralph Bean <rbean@redhat.com> - 1.5-3
changelog:
  - Renamed patches to python-urllib3-*
  - Fixed ssl check patch to use the correct cert path for Fedora.
  - Included dependency on ca-certificates
  - Cosmetic indentation changes to the .spec file.


author: Ralph Bean <rbean@redhat.com> - 1.5-4
changelog:
  - Upstream patch to fix Accept header when behind a proxy.
  - Reorganize patch numbers to more clearly distinguish them.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.9.1-1
changelog:
  - Update to upstream 1.9.1 because of security issues with the bundled
    python-pip in older releases.  This is just a quick fix until a
    python-virtualenv maintainer can unbundle the python-pip package
    see: https://bugzilla.redhat.com/show_bug.cgi?id=749378


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.5.0-5
changelog:
  - remove prodive/obsolete of python-xattr (bug 781838)
  - fix problem with mixed use of tabs and spaces


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-51.el7
changelog:
  - kvm-qmp-access-the-local-QemuOptsLists-for-drive-option.patch [bz#1026184]
  - kvm-qxl-add-sanity-check.patch [bz#751937]
  - kvm-Fix-two-XBZRLE-corruption-issues.patch [bz#1063417]
  - kvm-qdev-monitor-set-DeviceState-opts-before-calling-rea.patch [bz#1037956]
  - kvm-vfio-blacklist-loading-of-unstable-roms.patch [bz#1037956]
  - kvm-block-Set-block-filename-sizes-to-PATH_MAX-instead-o.patch [bz#1072339]
  - Resolves: bz#1026184
    (QMP: querying -drive option returns a NULL parameter list)
  - Resolves: bz#1037956
    (bnx2x: boot one guest to do vfio-pci with all PFs assigned in same group meet QEMU segmentation fault (Broadcom BCM57810 card))
  - Resolves: bz#1063417
    (google stressapptest vs Migration)
  - Resolves: bz#1072339
    (RHEV: Cannot start VMs that have more than 23 snapshots.)
  - Resolves: bz#751937
    (qxl triggers assert during iofuzz test)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-52.el7
changelog:
  - kvm-target-i386-Move-hyperv_-static-globals-to-X86CPU.patch [bz#1004773]
  - kvm-Fix-uninitialized-cpuid_data.patch [bz#1057173]
  - kvm-fix-coexistence-of-KVM-and-Hyper-V-leaves.patch [bz#1004773]
  - kvm-make-availability-of-Hyper-V-enlightenments-depe.patch [bz#1004773]
  - kvm-make-hyperv-hypercall-and-guest-os-id-MSRs-migra.patch [bz#1004773]
  - kvm-make-hyperv-vapic-assist-page-migratable.patch [bz#1004773]
  - kvm-target-i386-Convert-hv_relaxed-to-static-property.patch [bz#1057173]
  - kvm-target-i386-Convert-hv_vapic-to-static-property.patch [bz#1057173]
  - kvm-target-i386-Convert-hv_spinlocks-to-static-property.patch [bz#1057173]
  - kvm-target-i386-Convert-check-and-enforce-to-static-prop.patch [bz#1004773]
  - kvm-target-i386-Cleanup-foo-feature-handling.patch [bz#1057173]
  - kvm-add-support-for-hyper-v-timers.patch [bz#1057173]
  - Resolves: bz#1004773
    (Hyper-V guest OS id and hypercall MSRs not migrated)
  - Resolves: bz#1057173
    (KVM Hyper-V Enlightenment - New feature - hv-time (QEMU))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-53.el7
changelog:
  - kvm-dataplane-Fix-startup-race.patch [bz#1069541]
  - kvm-QMP-Relax-__com.redhat_drive_add-parameter-checking.patch [bz#1057471]
  - kvm-all-exit-in-case-max-vcpus-exceeded.patch [bz#993429]
  - kvm-block-gluster-code-movements-state-storage-changes.patch [bz#1031526]
  - kvm-block-gluster-add-reopen-support.patch [bz#1031526]
  - kvm-virtio-net-add-feature-bit-for-any-header-s-g.patch [bz#990989]
  - kvm-spec-Add-README.rhel6-gpxe-source.patch [bz#1073774]
  - kvm-pc-Add-RHEL6-e1000-gPXE-image.patch [bz#1073774]
  - kvm-loader-rename-in_ram-has_mr.patch [bz#1064018]
  - kvm-pc-avoid-duplicate-names-for-ROM-MRs.patch [bz#1064018]
  - kvm-qemu-img-convert-Fix-progress-output.patch [bz#1073728]
  - kvm-qemu-iotests-Test-progress-output-for-conversion.patch [bz#1073728]
  - kvm-iscsi-Use-bs-sg-for-everything-else-than-disks.patch [bz#1067784]
  - kvm-block-Fix-bs-request_alignment-assertion-for-bs-sg-1.patch [bz#1067784]
  - kvm-qemu_file-use-fwrite-correctly.patch [bz#1005103]
  - kvm-qemu_file-Fix-mismerge-of-use-fwrite-correctly.patch [bz#1005103]
  - Resolves: bz#1005103
    (Migration should fail when migrate guest offline to a file which is specified to a readonly directory.)
  - Resolves: bz#1031526
    (Can not commit snapshot when disk is using glusterfs:native backend)
  - Resolves: bz#1057471
    (fail to do hot-plug with "discard = on" with "Invalid parameter 'discard'" error)
  - Resolves: bz#1064018
    (abort from conflicting genroms)
  - Resolves: bz#1067784
    (qemu-kvm: block.c:850: bdrv_open_common: Assertion `bs->request_alignment != 0' failed. Aborted (core dumped))
  - Resolves: bz#1069541
    (Segmentation fault when boot guest with dataplane=on)
  - Resolves: bz#1073728
    (progress bar doesn't display when converting with -p)
  - Resolves: bz#1073774
    (e1000 ROM cause migrate fail  from RHEL6.5 host to RHEL7.0 host)
  - Resolves: bz#990989
    (backport inline header virtio-net optimization)
  - Resolves: bz#993429
    (kvm: test maximum number of vcpus supported (rhel7))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-54.el7
changelog:
  - kvm-qdev-monitor-Set-properties-after-parent-is-assigned.patch [bz#1046248]
  - kvm-block-Update-image-size-in-bdrv_invalidate_cache.patch [bz#1048575]
  - kvm-qcow2-Keep-option-in-qcow2_invalidate_cache.patch [bz#1048575]
  - kvm-qcow2-Check-bs-drv-in-copy_sectors.patch [bz#1048575]
  - kvm-block-bs-drv-may-be-NULL-in-bdrv_debug_resume.patch [bz#1048575]
  - kvm-iotests-Test-corruption-during-COW-request.patch [bz#1048575]
  - Resolves: bz#1046248
    (qemu-kvm crash when send "info qtree" after hot plug a device with invalid addr)
  - Resolves: bz#1048575
    (Segmentation fault occurs after migrate guest(use scsi disk and add stress) to des machine)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-55.el7
changelog:
  - kvm-scsi-Change-scsi-sense-buf-size-to-252.patch [bz#1058173]
  - kvm-scsi-Fix-migration-of-scsi-sense-data.patch [bz#1058173]
  - Resolves: bz#1058173
    (qemu-kvm core dump booting guest with scsi-generic disk attached when using built-in iscsi driver)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-56.el7
changelog:
  - kvm-configure-Fix-bugs-preventing-Ceph-inclusion.patch [bz#1078809]
  - Resolves: bz#1078809
    (can not boot qemu-kvm-rhev with rbd image)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-57.el7
changelog:
  - kvm-virtio-net-fix-guest-triggerable-buffer-overrun.patch [bz#1078308]
  - Resolves: bz#1078308
    (EMBARGOED CVE-2014-0150 qemu: virtio-net: fix guest-triggerable buffer overrun [rhel-7.0])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-58.el7
changelog:
  - kvm-pc-Use-cpu64-rhel6-CPU-model-by-default-on-rhel6-mac.patch [bz#1080170]
  - kvm-target-i386-Copy-cpu64-rhel6-definition-into-qemu64.patch [bz#1078607 bz#1080170]
  - Resolves: bz#1080170
    (intel 82576 VF not work in windows 2008 x86 - Code 12 [TestOnly])
  - Resolves: bz#1080170
    (Default CPU model for rhel6.* machine-types is different from RHEL-6)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-59.el7
changelog:
  - kvm-qemu-iotests-add-.-check-cloop-support.patch [bz#1066691]
  - kvm-qemu-iotests-add-cloop-input-validation-tests.patch [bz#1066691]
  - kvm-block-cloop-validate-block_size-header-field-CVE-201.patch [bz#1079455]
  - kvm-block-cloop-prevent-offsets_size-integer-overflow-CV.patch [bz#1079320]
  - kvm-block-cloop-refuse-images-with-huge-offsets-arrays-C.patch [bz#1079455]
  - kvm-block-cloop-refuse-images-with-bogus-offsets-CVE-201.patch [bz#1079455]
  - kvm-size-off-by-one.patch [bz#1066691]
  - kvm-qemu-iotests-Support-for-bochs-format.patch [bz#1066691]
  - kvm-bochs-Unify-header-structs-and-make-them-QEMU_PACKED.patch [bz#1066691]
  - kvm-bochs-Use-unsigned-variables-for-offsets-and-sizes-C.patch [bz#1079339]
  - kvm-bochs-Check-catalog_size-header-field-CVE-2014-0143.patch [bz#1079320]
  - kvm-bochs-Check-extent_size-header-field-CVE-2014-0142.patch [bz#1079315]
  - kvm-bochs-Fix-bitmap-offset-calculation.patch [bz#1066691]
  - kvm-vpc-vhd-add-bounds-check-for-max_table_entries-and-b.patch [bz#1079455]
  - kvm-vpc-Validate-block-size-CVE-2014-0142.patch [bz#1079315]
  - kvm-vdi-add-bounds-checks-for-blocks_in_image-and-disk_s.patch [bz#1079455]
  - kvm-vhdx-Bounds-checking-for-block_size-and-logical_sect.patch [bz#1079346]
  - kvm-curl-check-data-size-before-memcpy-to-local-buffer.-.patch [bz#1079455]
  - kvm-qcow2-Check-header_length-CVE-2014-0144.patch [bz#1079455]
  - kvm-qcow2-Check-backing_file_offset-CVE-2014-0144.patch [bz#1079455]
  - kvm-qcow2-Check-refcount-table-size-CVE-2014-0144.patch [bz#1079455]
  - kvm-qcow2-Validate-refcount-table-offset.patch [bz#1066691]
  - kvm-qcow2-Validate-snapshot-table-offset-size-CVE-2014-0.patch [bz#1079455]
  - kvm-qcow2-Validate-active-L1-table-offset-and-size-CVE-2.patch [bz#1079455]
  - kvm-qcow2-Fix-backing-file-name-length-check.patch [bz#1066691]
  - kvm-qcow2-Don-t-rely-on-free_cluster_index-in-alloc_refc.patch [bz#1079339]
  - kvm-qcow2-Avoid-integer-overflow-in-get_refcount-CVE-201.patch [bz#1079320]
  - kvm-qcow2-Check-new-refcount-table-size-on-growth.patch [bz#1066691]
  - kvm-qcow2-Fix-types-in-qcow2_alloc_clusters-and-alloc_cl.patch [bz#1066691]
  - kvm-qcow2-Protect-against-some-integer-overflows-in-bdrv.patch [bz#1066691]
  - kvm-qcow2-Fix-new-L1-table-size-check-CVE-2014-0143.patch [bz#1079320]
  - kvm-dmg-coding-style-and-indentation-cleanup.patch [bz#1066691]
  - kvm-dmg-prevent-out-of-bounds-array-access-on-terminator.patch [bz#1066691]
  - kvm-dmg-drop-broken-bdrv_pread-loop.patch [bz#1066691]
  - kvm-dmg-use-appropriate-types-when-reading-chunks.patch [bz#1066691]
  - kvm-dmg-sanitize-chunk-length-and-sectorcount-CVE-2014-0.patch [bz#1079325]
  - kvm-dmg-use-uint64_t-consistently-for-sectors-and-length.patch [bz#1066691]
  - kvm-dmg-prevent-chunk-buffer-overflow-CVE-2014-0145.patch [bz#1079325]
  - kvm-block-vdi-bounds-check-qemu-io-tests.patch [bz#1066691]
  - kvm-block-Limit-request-size-CVE-2014-0143.patch [bz#1079320]
  - kvm-qcow2-Fix-copy_sectors-with-VM-state.patch [bz#1066691]
  - kvm-qcow2-Fix-NULL-dereference-in-qcow2_open-error-path-.patch [bz#1079333]
  - kvm-qcow2-Fix-L1-allocation-size-in-qcow2_snapshot_load_.patch [bz#1079325]
  - kvm-qcow2-Check-maximum-L1-size-in-qcow2_snapshot_load_t.patch [bz#1079320]
  - kvm-qcow2-Limit-snapshot-table-size.patch [bz#1066691]
  - kvm-parallels-Fix-catalog-size-integer-overflow-CVE-2014.patch [bz#1079320]
  - kvm-parallels-Sanity-check-for-s-tracks-CVE-2014-0142.patch [bz#1079315]
  - kvm-fix-machine-check-propagation.patch [bz#740107]
  - Resolves: bz#1066691
    (qemu-kvm: include leftover patches from block layer security audit)
  - Resolves: bz#1079315
    (CVE-2014-0142 qemu-kvm: qemu: crash by possible division by zero [rhel-7.0])
  - Resolves: bz#1079320
    (CVE-2014-0143 qemu-kvm: Qemu: block: multiple integer overflow flaws [rhel-7.0])
  - Resolves: bz#1079325
    (CVE-2014-0145 qemu-kvm: Qemu: prevent possible buffer overflows [rhel-7.0])
  - Resolves: bz#1079333
    (CVE-2014-0146 qemu-kvm: Qemu: qcow2: NULL dereference in qcow2_open() error path [rhel-7.0])
  - Resolves: bz#1079339
    (CVE-2014-0147 qemu-kvm: Qemu: block: possible crash due signed types or logic error [rhel-7.0])
  - Resolves: bz#1079346
    (CVE-2014-0148 qemu-kvm: Qemu: vhdx: bounds checking for block_size and logical_sector_size [rhel-7.0])
  - Resolves: bz#1079455
    (CVE-2014-0144 qemu-kvm: Qemu: block: missing input validation [rhel-7.0])
  - Resolves: bz#740107
    ([Hitachi 7.0 FEAT]  KVM: MCA Recovery for KVM guest OS memory)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7
changelog:
  - kvm-qcow2-fix-dangling-refcount-table-entry.patch [bz#1081793]
  - kvm-qcow2-link-all-L2-meta-updates-in-preallocate.patch [bz#1081393]
  - Resolves: bz#1081393
    (qemu-img will prompt that 'leaked clusters were found' while creating images with '-o preallocation=metadata,cluster_size<=1024')
  - Resolves: bz#1081793
    (qemu-img core dumped when creating a qcow2 image base on block device(iscsi or libiscsi))


author: Rex Dieter <rdieter@fedoraproject.org> - 0.0.4-2
changelog:
  - update summary/description/Source_url
  - %files: track soname
  - cleaner cmake-fu
  - upstream noexecstack patch


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.0.4-3
changelog:
  - require the main package with exact version-release in -examples
  - remove explicit Requires: qt4-devel pkgconfig from -devel, now autodetected


author: Rex Dieter <rdieter@fedoraproject.org> - 0.7.1-8
changelog:
  - skip stripping some compiler flags (undocumented)
  - %files: track files closer (lib soname in particular)
  - -devel: avoid dep on cmake 
  - %check: +make test, pkgconfig check


author: Doug Ledford <dledford@redhat.com> - 0.4.6-6
changelog:
  - Fix the fact that qperf was using the wrong PF_RDS define now that RDS
    is integrated upstream and its assigned number is no longer temporary


author: Matthieu Saulnier <fantom@fedoraproject.org> - 3.2.0-1
changelog:
  - update to 3.2.0
  - remove BuildRoot tag in spec file
  - remove "rm -rf $RPM_BUILD_ROOT" at the beginning of %install section
  - remove %clean section
  - remove %defattr lines
  - add a joker for libqrencode.so.* files


author: Peter Gordon <peter@thecodergeek.com> - 3.2.0-2
changelog:
  - Add patch to fix improper LIBPTHREAD macro in the pkgconfig file:
    + fix-LIBPTHREAD-macro.patch
  - Resolves: #795582 (qrencode-devel: Malformed pkgconfig file causes build to
    fail ("@LIBPTHREAD@: No such file or directory"))


author: Matthieu Saulnier <fantom@fedoraproject.org> - 3.3.1-1
changelog:
  - update to 3.3.1
  - remove "Group" tag in spec file
  - fix manfile suffix
  - remove patch to fix improper LIBPTHREAD macro in the pkgconfig file:
    - upstream issue


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.1-6
changelog:
  - obsolete quagga-sysvinit subpackage
  - use macro to specify location where to install tmpfiles configuration file
  - fix rpm scripts handling documentation in info format


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.1-7
changelog:
  - quagga is service which might implement networking, thus it should not have
    WantedBy=network.target in its systemd configuration
  - resolves: #976883


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.3-1
changelog:
  - update to 0.99.22.3
  - disable ospfapi and ospfclient
  - fix bogus dates in changelog
  - resolves : #984532


author: Michal Sekletar <msekleta@redhat.com> - 0.99.22.4-4
changelog:
  - fix link to upstream tarball (#1059219)
  - reference pidfiles of quagga daemons in service files (#842309)


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-4
changelog:
  - Do not fiddle with quota files on XFS and GFS (bug #846296)
  - Make sure option -d at quotacheck provides at least as much information as
    option -v (SF#3602777)


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-6
changelog:
  - Add LGPLv2+ and GPLv2 to license declaration
  - Correct changelog dates
  - Package additional LDAP scripts as a documentation
  - Package XFS-specific tools


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-9
changelog:
  - Move /sbin/* files under /usr (bug #983179)
  - Harden executables due to rpc.rquotad and quota_nld daemons (bug #983179)
  - Document quotagrpadmins(5), quotatab(5), warnquota.conf(5), rcp.rquota(8)
    (bug #983179)


author: Prarit Bhargava <prarit@redhat.com>
changelog:
  - Initial import from https://github.com/andikleen/mce-inject.git
  - Initial import from git://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git


author: Prarit Bhargava <prarit@redhat.com>
changelog:
  - Initial import from git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
  - updated mce-inject to commit 4cbe4632


author: Honza Horak <hhorak@redhat.com> - 5.8.1-2
changelog:
  - Provides: bundled(gnulib) added, as per #821786
  - minor spec file clean up
  - install-info run in postin/postun


author: Doug Ledford <dledford@redhat.com> - 7.0-3.10.1
changelog:
  - Update numbering scheme.  Version now corresponds to the version of
    rhel it is built under, release is a dual component number that
    gives the upstream kernel version of the InfiniBand stack used
    in our current release (aka, the 3.10 above) followed by our
    own release number (aka .1).
  - Make rds loading conditional on the rds module existing (it has
    been disabled in some kernels)
  - Update udev rule script and rdma-kernel-init scripts to offload
    node description setting to udev, and make it more reliable
  - Resolves: bz1018658


author: Doug Ledford <dledford@redhat.com> - 7.0-3.10.2
changelog:
  - Add a comment to the udev rules file for IPoIB renaming
  - Move rdma commands to libexecdir.  They aren't intended to be run
    manually by humans and this avoids the errors about man pages
    not being present
  - Move udev rules to /usr/lib/udev
  - Resolves: bz1012796


author: Doug Ledford <dledford@redhat.com> - 7.0_3.10_rc8-1
changelog:
  - Update Requires to systemd-units instead of just systemd
  - Reset numbering back to what it is supposed to be, but change the
    format to mass rebuilds don't cause a problem in the future
  - Related: bz1018658, bz1056145


author: Doug Ledford <dledford@redhat.com> - 7.0_3.13_rc8-2
changelog:
  - Add a dracut module so the rdma stack can be brought up in
    by the initramfs
  - Related: bz1064316


author: Doug Ledford <dledford@redhat.com> - 7.0_3.13_rc8-3
changelog:
  - Use is_available_wait from new initscripts so we wait for link to
    come up.  These keeps high speed devices from failing to start
    because their link is slow to initialize.
  - Related: bz1078915


author: Stef Walter <stefw@redhat.com> - 0.14.3-1
changelog:
  - Update to upstream 0.14.3 point release
  - Populate LoginFormats correctly [#967011]
  - Documentation clarifications [#985773] [#967565]
  - Set sssd.conf default_shell per domain [#967569]
  - Notify in terminal output when installing packages [#984960]
  - If joined via adcli, delete computer with adcli too [#967008]
  - If input is not a tty, then read from stdin without getpass()
  - Configure pam_winbind.conf appropriately [#985819]
  - Refer to FreeIPA as IPA [#967019]
  - Support use of kerberos ccache to join when winbind [#985817]


author: Stef Walter <stefw@redhot.com> - 0.14.4-1
changelog:
  - Update to upstream 0.14.4 point release
  - Fix up the [sssd] section in sssd.conf if it's screwed up [#987491]
  - Add an --unattended argument to realm command line client [#976593]
  - Clearer 'realm permit' manual page example [#985800]


author: Stef Walter <stefw@redhat.com> - 0.14.5-1
changelog:
  - Update to upstream 0.14.5 point release
  - Fix regression conflicting --unattended and -U as in --user args [#996223]
  - Pass discovered server address to adcli tool [#996995]


author: Stef Walter <stefw@redhat.com> - 0.14.6-1
changelog:
  - Update to upstream 0.14.6 point release
  - Set 'kerberos method = system keytab' in smb.conf properly [#997580]
  - Limit Netbios name to 15 chars when joining AD domain [#1001667]


author: Stef Walter <stefw@redhat.com> - 0.14.6-5
changelog:
  - Don't crash when full_name_format is not in sssd.conf [#1051033]
    This is a regression from a prior update.


author: Zoltan Kota <z.kota[AT]gmx.net> 3.6-29
changelog:
  - Fix build on x86_64. Run autoreconf to update config files.
    autoconf >= 2.64 needs to patch the flex.m4 file.
    Fixing FTBFS bug #564601.


author: Ondrej Vasik <ovasik@redhat.com> - 4.1-14
changelog:
  - require spax instead of pax (more POSIX compatible) (#965658)
  - require another set of perl modules in -languages (#959129)
  - polish a bit the nsswitch.conf hack - include mdns4_minimal (#915147)


author: Ondrej Vasik <ovasik@redhat.com> - 4.1-16
changelog:
  - add provides/obsoletes for redhat-lsb-compat to better
    deal with possible upgrade RHEL-6->RHEL-7 (#976792)


author: Ondrej Vasik <ovasik@redhat.com> - 4.1-18
changelog:
  - Require sil-abyssinica-fonts in supplemental(#994341)
  - Fully specify requirements on subpackages(#971386)


author: Matthias Clasen <mclasen@redhat.com> - 12.0.1-1
changelog:
  * Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 10.0.1-4
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild


author: Jack Magne <jmagne@redhat.com>= 1.1.0-21
changelog:
  - Resolves #865721 - Switch BuildRequires from autoconf213 ~~> autoconf
  - Resolves #963606 - esc ceased working after Firefox/xulrunner update to 17 and above series


author: Jack Magne <jmagne@redhat.com>=1.1.0-26
changelog:
  - Resolves: #1033779 - Mouse move on a locked screen display Smart Card Manager smart card insert/removal event notifications.
  - Resolves: #1033220 - ESC phone home/authentication dialog should pop it to top of window stack to get focus


author: David Shea <dshea@redhat.com> - 2:0.7.3-0
changelog:
  - Set the epoch to 2 to provide a clean upgrade path between RHEL major versions
    Related: rhbz#1012668


author: David Shea <dshea@redhat.com> - 2:0.7.4-1
changelog:
  - Fix the systemd Requires: line.
    Resolves: rhbz#1035461
  - Drop /run/initramfs/upgrade.conf
    Related: rhbz#1030561


author: David Shea <dshea@redhat.com> - 2:0.7.6-1
changelog:
  - Remove the URL from the Source0 line (dshea)
    Resolves: rhbz#1056730
  - fix UnboundLocalError with fedup --device (wwoods)
    Resolves: rhbz#1056717


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:1.5-9
changelog:
  - Install LICENSE file with javadoc package
  - Add maven POM file
  - Update to current packaging guidelines
  - Convert versioned JAR to unversioned


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 1.0-10.5
changelog:
  - Install license file with javadoc package
  - Convert versioned javadoc to versionless
  - Update to current packaging guidelines
  - Remove msv provides and obsoletes


author: David Vossel <dvossel@redhat.com> - 3.9.5-17
changelog:
  - Split send_ua utility out of IPv6addr.c source so it can be
    re-used in IPaddr2 without requiring cluster-glue.
  - Fixes issue with pgsql and SAPInstance not setting transient
    attributes correctly when local corosync node name is not
    equal to 'uname -n'
  - High: ocft: Fedora supported test cases

    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-18
changelog:
  - Remove support for (nginx, mysql-proxy, rsyslog). nginx and
    mysql-proxy are not a supported projects. Rsyslog is not an
    agent we will be supporting in an HA environment.

    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-20
changelog:
  - tomcat agent updates for pacemaker support
  - slapd agent updates for pacemaker support
  - Fixes missing etab file required for nfsserver

    Resolves: rhbz#1033016
    Resolves: rhbz#917681


author: David Vossel <dvossel@redhat.com> - 3.9.5-24
changelog:
  - Addition of the clvmd resource-agent
  - Support monitoring qemu based VirtualDomain resources without
    requiring libvirtd to be running.

    Resolves: rhbz#1064512
    Resolves: rhbz#1060367


author: David Vossel <dvossel@redhat.com> - 3.9.5-25
changelog:
  - Rename clvmd agent to clvm to avoid problems associated
    with having a resource-agent named the same exact name
    as the binary the agent manages.

    Resolves: rhbz#1064512


author: David Vossel <dvossel@redhat.com> - 3.9.5-26
changelog:
  - Handle monitor qemu based VirtualDomain resources without
    requiring libvirtd even if configuration file does not
    contain an 'emulator' value pointing to the emulator binary.

    Resolves: rhbz#1060367


author: Ade Lee <alee@redhat.com> - 2.3.2-11
changelog:
  - Removed unneeded maven-checkstyle-plugin BR
  - Removed Tomcat 6 dependency
  - Replaced maven BR with maven-local


author: Ade Lee <alee@redhat.com> - 2.3.2-12
changelog:
  - Removed modules not needed for pki-core
  - Bugzilla # 973224 - resteasy-base must be split into subpackages to 
    simplify dependencies.  With help from msrb.


author: Tom Lane <tgl@redhat.com> 9.0.0-1
changelog:
  - Update pg_filedump to version 9.0.0, to support PostgreSQL 9.0.
  - Relabel license as PostgreSQL now that that's separately recognized by OSI.


author: Tom Lane <tgl@redhat.com> 9.1.0-1
changelog:
  - Update pg_filedump to version 9.1.0, to support PostgreSQL 9.1.
  - Point to new upstream home at pgfoundry.org.


author: Ville Skyttä <ville.skytta@iki.fi> - 1.7R3-3
changelog:
  - Crosslink javadocs with Java's.
  - Drop versioned jars and javadoc dir.
  - Exclude patch backup files from -examples.


author: Ondrej Vasik <ovasik@redhat.com> - 8.1-2
changelog:
  - Add dist tag, fix a few rpmlint issues, rebuild due to
    wrong vendor (#451229)
  - Added ncurses requirement(#469390)


author: Phil Knirsch <pknirsch@redhat.com> - 8.1-4
changelog:
  - Added the "we-are-upstream" comments according to Fedora review (#226376)
  - Added -p option to install to preserve timestamps (#226376)


author: Ondrej Vasik <ovasik@redhat.com> - 8.1-5
changelog:
  - removed clear from dot-bash_logout (synchronized with bash,
    related to #429406)
  - removed unset USERNAME from dot-bash_profile (synchronized with
    bash, related to #196735)


author: Steve Dickson <steved@redhat.com> - 0.2.0-18
changelog:
  - Fixed typo causing rpcbind to run as root (bz 734598)
  - Added /etc/sysconfig/rpcbind config file (bz 861025)


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.1-7
changelog:
  - Fix relocation regression wrt unowned directories (#1001553)
  - Fix build-time double-free wrt %caps() on wildcard file entry (#1002089)
  - Fix source URL in spec


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.1-8
changelog:
  - Fix segfault on empty -p <lua> scriptlet body (#1004062)
  - Add missing dependency on tar to rpm-build (#986539)


author: Florian Festi <ffesti@redhat.com> - 4.11.1-9
changelog:
  - Fix byteorder for 64 bit tags on big endian machines (#1012946)
   - Better RPMSIGTAG_SIZE vs PMSIGTAG_LONGSIZE detection (#1012595)


author: Tom Callaway <spot@fedoraproject.org> - 1.4-10
changelog:
  - fix handling of ruby RI files as text files (they are binary files)
  - apply upstream fix for macro regexp


author: Thomas Woerner <twoerner@redhat.com> - 1.5-4
changelog:
  - enable bash-completion again, fixes (RHBZ#495529)
  - fixed rpmlint reports missing-lsb-keyword Default-Stop (rhbz#976341)


author: Than Ngo <than@redhat.com> - 3.11-1
changelog:
  - 3.11
  - bz#540763, add IP allocation by pppd ability to pppoe-server
  - bz#808676, add missing % symbol for triggerun


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1.4.8-1
changelog:
  - New version
    Resolves: rhbz#966639
  - Updated and defuzzified patches
  - Still use lua-5.1 (fedoras < f20)


author: Michal Sekletar <msekleta@redhat.com> - 0.17-71
changelog:
  - resolves: RHBZ #737244 #896583 #947213
  - migrate from xinetd to systemd configuration
  - close pam session correctly when client does not ask for separate error channel
  - fix pty handling which was broken by changes in /bin/login


author: Michal Sekletar <msekleta@redhat.com> - 0.17-72
changelog:
  - unit files must not be marked as config files
  - fix handling of non-native IPv6 connections via AF_INET6 socket


author: Pavel Šimerda <psimerda@redhat.com> - 3.0.9-14
changelog:
  - Resolves: #1052814 - rsync command is terminated with SIGSEGV
  - Resolves: #1052814 - add missing patch file


author: Tomas Heinrich <theinric@redhat.com> 7.4.7-1
changelog:
  - rebase to 7.4.7
    add requirement on libestr >= 0.1.9
    resolves: #836485
    resolves: #1020854
    resolves: #1040036
  - drop patch 4; not needed anymore
    rsyslog-7.4.2-imuxsock-rfc3339.patch
  - install the rsyslog-recover-qi.pl tool
  - fix a typo in a package description
  - add missing defattr directives
  - add a patch to remove references to Google ads in the html docs
    rsyslog-7.4.7-bz1030044-remove-ads.patch
    Resolves: #1030043
  - add a patch to allow numeric specification of UIDs/GUIDs
    rsyslog-7.4.7-numeric-uid.patch
    resolves: #1032198
  - change the installation prefix to "/usr"
    resolves: #1032223
  - fix a bad date in the changelog
    resolves: #1043622
  - resolve a build issue with missing mysql_config by adding
    additional BuildRequires for the mysql package
  - add a patch to resolve build issue on ppc
    rsyslog-7.4.7-omelasticsearch-atomic-inst.patch


author: Tomas Heinrich <theinric@redhat.com> 7.4.7-3
changelog:
  - replace rsyslog-7.3.15-imuxsock-warning.patch
    with rsyslog-7.4.7-bz1053669-imuxsock-wrn.patch
    resolves: #1053669
  - add rsyslog-7.4.7-bz1052266-dont-link-libee.patch to prevent
    linking the main binary with libee
    resolves: #1052266
  - add rsyslog-7.4.7-bz1054171-omjournal-warning.patch to fix
    a condition for issuing a warning in omjournal
    resolves: #1054171
  - drop the "v5" string from the conf file as it's misleading
    resolves: #1040036


author: Tomas Heinrich <theinric@redhat.com> 7.4.7-5
changelog:
  - move the rscryutil man page to the crypto subpackage
    resolves: #1056565
  - add a patch to prevent message loss in imjournal
    rsyslog-7.4.7-bz1038136-imjournal-message-loss.patch
    resolves: #1038136


author: Tomas Heinrich <theinric@redhat.com> 7.4.7-6
changelog:
  - disable the imklog plugin by default
    the patch for rhbz#1038136 caused duplication of kernel messages since the
    messages read by the imklog plugin were now also pulled in from journald
    resolves: #1078654


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-13
changelog:
  - Fixes multilib conlicts of .gemspec files.
  - Make symlinks for psych gem to ruby stdlib dirs (rhbz#979133).
  - Use system-wide cert.pem.


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-14
changelog:
  - Add forgotten psych.rb link into rubygem-psych to fix "private method `load'
    called for Psych:Moduler" error (rhbz#979133).


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-15
changelog:
  - Fix version regex algorithmic complexity vulnerability (CVE-2013-4287).
    - Resolves: rhbz#1006429


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-16
changelog:
  - Fix version regex algorithmic complexity vulnerability (CVE for incomplete
    fix for CVE-2013-4287) (CVE-2013-4363).
    - Related: rhbz#1006429


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-17
changelog:
  - Heap overflow in floating point parsing (CVE-2013-4164).
    * ruby-2.0.0-p353-CVE-2013-4164-ignore-too-long-fraction-part.patch
    - Resolves: rhbz#1033503
  - Allow MD5 in OpenSSL tests.


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-18
changelog:
  - Fix FTBFS due to expired certificate for IMAP test case.
  - Fix test_aes_gcm_wrong_tag random failures.
    - Resolves: rhbz#1048899


author: Vít Ondruch <vondruch@redhat.com> - 0.16.0-1
changelog:
  - Update to thor 0.16.0.
  - Remove rubygem(diff-lcs) dependency, since it is just optional.
  - Remove rubygem(ruby2ruby) dependnecy, since it is just optional, to allow
    conversion of Rakefiles to Thorfiles (but it doesnt work withou ParseTree anyway).


author: - Alexander Bokovoy <abokovoy@redhat.com> - 4.1.1-30
changelog:
  - resolves: #1083859  - Force KRB5CCNAME in Samba systemd units.
  - related: #1082598 - Fully enables systemd integration.


author: Nils Philippsen <nils@redhat.com> - 1.0.23-18
changelog:
  - build against libusb-1.0 on Fedora >= 18 (#1003193)
  - require libusbx-devel instead of libusb1-devel which is obsolete


author: Nils Philippsen <nils@redhat.com> - 1.0.24-1
changelog:
  - version 1.0.24
  - use (hopefully stable) Alioth download URL
  - update udev patch, remove obsolete patches
  - use udev hwdb instead of huge rulesets


author: Nils Philippsen <nils@redhat.com> - 1.0.14-10
changelog:
  - add missing documentation files AUTHORS, COPYING, README
  - don't distribute sane-style.rc
  - use %buildroot consistently
  - explain missing xcam.desktop file


author: Nils Philippsen <nils@redhat.com> - 1.0.14-14
changelog:
  - clean up:
    - don't BR: gimp-devel, R: sane-backends
    - get rid of buildroot, %makeinstall and %clean section
    - dont obsolete/provide "sane" (ancient)


author: Richard Marko<rmarko@redhat.com> 0.8-1
changelog:
  - New upstream version
    - Added support for json de/serialization of reports and stacktraces.
    - Library version number increased, as the interface changed since the last release


author: Jakub Filak <jfilak@redhat.com> 0.9-1
changelog:
  - New upstream version
    - Enrich koops uReport data with koops text and kernel version.
    - Improve koops modules handling.


author: Martin Milata <mmilata@redhat.com> 0.9-2
changelog:
  - Fix malformed JSON for some Java and koops reports
    - Resolves: #1035317
    - Resolves: #1036790
  - Fix memory leak in RPM handling
    - Resolves: #1016780
  - Check for unsigned overflows
    - Resolves: #1034869


author: Martin Milata <mmilata@redhat.com> 0.13-2
changelog:
  - Use elfutils unwinder
    - Resolves: #1051569
  - Disable function fingerprinting
    - Resolves: #1052402


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2.2.5-6
changelog:
  - Move libcimcClientXML.so from -devel to main package - it's needed for proper function
    Resolves: #1056407


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.5.1-11
changelog:
  - Fix mounted filesystem is shown as disabled when fstab entry uses link, UUID or LABEL
    Resolves: #921487


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.4.0-5
changelog:
  - Add support for arbitrary names of network devices in Linux_NetworkPortImplementsIPEndpoint
    association
    Resolves: #682386
  - Remove macros from changelog, register to sfcb


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.2.0-3
changelog:
  - Fix provider segfaults when enumerating instances of Linux_SysfsAttribute class
  - Fix provider doesn't show much sysfs entries
  - Add mofs registration for various CIMOMs


author: Tomas Bzatek <tbzatek@redhat.com> - 0.8.0-10.20120315cvs
changelog:
  - Add support for rsyslog $IncludeConfig directive (#971807)
  - Add support for filter definitions (#971807)
  - Various rsyslog compatibility fixes (#971807)


author: Roman Rakus <rrakus@redhat.com> - 2.2.7-3
changelog:
  - Fixed a typo
  - Added missing providers
  - improved providers registration
  - Fixed owning of filesystem's directories (man)


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.3.16-3
changelog:
  - Fix indCIMXmlHandler crash in IndCIMXMLHandlerInvokeMethod with Embedded Instances 
    Resolves: #957747
  - Fix sfcb creates invalid XML with embedded object inside embedded object
    Resolves: #957742


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.3.16-11
changelog:
  - Fix connection fails to openwsman with sfcbLocal frontend
    Resolves: #1047781
  - Fix multilib issue with man page and config file
    Resolves: #1067842


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 1.6.2-7
changelog:
  - Fix wrong usage of libcurl API, which caused segfaults when wbemcli was used
    with https scheme (patch by kdudka@redhat.com)


author: Martin Preisler <mpreisle@redhat.com> 0.8.2-1
changelog:
  - Updated to new version
  - Added a workaround to the cmake invocation because of faulty openscap .pc file


author: Martin Preisler <mpreisle@redhat.com> 0.8.6-1
changelog:
  - Upgrade to upstream 0.8.6 version:
    https://fedorahosted.org/scap-workbench/query?milestone=0.8.6&status=closed
  - Require polkit


author: Tomas Tomecek <ttomecek@redhat.com> - 0.12.0-4
changelog:
  - Add patch to use build_dir argument in build_extension
  - Fix rpmlint warnings
  - License Updated
  - Don't build with python3


author: Tomas Tomecek <ttomecek@redhat.com> - 0.12.1-1
changelog:
  - Update to 0.12.1 - fixes CVE-2013-4251 (rhbz#997579)
  - change working directory to build directory when building ext (rhbz#916695)
  - use SHA-256 instead of md5 -- FIPS mode (rhbz#877920)
  - unbundle python-six (bug rhbz#1019642)


author: Jindrich Novy <jnovy@redhat.com> 20120927-1
changelog:
  - update to 20120927
  - better BUILDROOT processing
  - bash completition for scl command
  - debuginfo package now has SCL-specific provide
  - non-SCL builds are without warning in build log
  - improved help


author: Jindrich Novy <jnovy@redhat.com> 20121110-1
changelog:
  - introduce sclbuild utility
  - fix exporting of env. variables when mutiple collections are
    enabled at the same time
  - better bash completion
  - fix changelog


author: Jan Zeleny <jzeleny@redhat.com> - 20130529-2
changelog:
  - add scl_source script for intercollection dependencies (#1032444)
  - updated macros in macros.scl-filesystem (#1032451, #1032451)
  - add delimiter between collections and command (#1032460)
  - fix the name of attr macros (#1023628)


author: Jan Zeleny <jzeleny@redhat.com> - 20130529-4
changelog:
  - fixed some coverity-reported bugs (related: #1032616)
  - a note about env. variables in man page (#968954)
  - drop the /var/spool/uucp from the default fs structure (#1033674)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-2
changelog:
  - Disable options not used / not supported by RHEL-7 (rhbz 927582)
  - Add pvpanic device driver (rhbz 967777)
  - Obsolete vgabios (rhbz 976340)


author: Miroslav Rezanina <mrezanin@redhat.com> - seabios-1.7.2.2-3.el7
changelog:
  - seabios-floppy-Introduce-struct-floppy_pio_s-for-floppy-PIO-.patch [bz#920140]
  - seabios-floppy-Cleanup-floppy-irq-wait-handling.patch [bz#920140]
  - seabios-floppy-Implement-media-format-sensing.patch [bz#920140]
  - seabios-Place-rpm-version-info-into-version-banner.patch [bz#894979]
  - seabios-ahci-add-missing-check-for-allocation-failure.patch [bz#1005747]
  - Resolves: bz#1005747
    (fail to boot rhel7 guest with >126(21 ahci controller) ahci disks)
  - Resolves: bz#894979
    (place rpm version info into version banner)
  - Resolves: bz#920140
    (qemu-kvm emulation of 2.88M floppy fails)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-4.el7
changelog:
  - seabios-Introduce-and-convert-pmm-code-to-use-standard-list-.patch [bz#947051]
  - seabios-Fix-error-in-hlist_for_each_entry_safe-macro.patch [bz#947051]
  - seabios-Another-fix-for-hlist_for_each_entry_safe.patch [bz#947051]
  - seabios-uas-add-temporary-superspeed-stopgap.patch [bz#947051]
  - seabios-usb-add-usb_update_pipe.patch [bz#947051]
  - seabios-usb-add-xhci-support.patch [bz#947051]
  - seabios-xhci-adaptions-for-old-rhel7-seabios-codebase.patch [bz#947051]
  - seabios-allow-1TB-of-RAM.patch [bz#1016974]
  - Resolves: bz#1016974
    ([HP 7.0 FEAT]: Increase KVM guest supported memory to 4TiB)
  - Resolves: bz#947051
    ([RFE] implement xhci support in seabios)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-5.el7
changelog:
  - seabios-build-explicitly-set-ROM-size.patch [bz#1038604]
  - Resolves: bz#1038604
    (make seabios 256k for rhel7 machine types)


author: Michal Novotny <minovotn@redhat.com> - seabios-1.7.2.2-6.el7
changelog:
  - seabios-biostables-support-looking-up-RSDP.patch [bz#1034877]
  - seabios-romfile_loader-utility-to-patch-in-memory-ROM-files.patch [bz#1034877]
  - seabios-acpi-load-and-link-tables-through-romfile-loader.patch [bz#1034877]
  - Resolves: bz#1034877
    (export acpi tables to guests (seabios))


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-8.el7
changelog:
  - seabios-vgabios-Fix-cirrus-memory-clear-on-mode-switch.patch [bz#979898]
  - Resolves: bz#979898
    ([qemu-kvm]The win2k3-32 guest display is abnormal when using -vga cirrus)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-10.el7
changelog:
  - Fixed seavgabios-bin obsoletes/provides [bz#1035452]
  - Resolves: bz#1035452
    ( seavgabios-bin has bad obsoletes/provides for "vgabios")


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-11.el7
changelog:
  - seabios-init_virtio_scsi-reset-the-HBA-before-freeing-its-vi.patch [bz#1013418]
  - seabios-smbios-catch-zero-length-strings.patch [bz#1052837]
  - seabios-resume-restore-piix-pm-config-registers-after-resume.patch [bz#1049860]
  - seabios-pci-align-64bit-pci-regions-to-1G.patch [bz#1055832]
  - seabios-pci-log-pci-windows.patch [bz#1055832]
  - seabios-pci-improve-io-address-space-allocation.patch [bz#1055832]
  - Resolves: bz#1013418
    (qemu-kvm with a virtio-scsi controler without devices attached quits after stop/cont in HMP/QMP)
  - Resolves: bz#1049860
    (Guest agent command hang there after restore the guest from the save file)
  - Resolves: bz#1052837
    (The wrong DMI structures could not be decoded while booting vm with -smbios params)
  - Resolves: bz#1055832
    (can not see seabios GUI when boot with 155 virtio-blk-pci disks via pci-bridge)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.7.2.2-12.el7
changelog:
  - seabios-Workaround-for-a-win8.1-32-S4-resume-bug.patch [bz#1050775]
  - Resolves: bz#1050775
    ([whql]KVM internal error. Suberror: 1 when win8.1-32 guest run HCK jobs)


author: Rui Matos <rmatos@redhat.com> - 3.4.0-2
changelog:
  - Use rpm macros to define the version number
  - Do verbose builds
  - Fix %files entries to comply with ownership rules


author: Martin Briza <mbriza@redhat.com> - 4.2.1-9
changelog:
  - Backported commit from upstream to fix treating "x26" as "&" character
  - Added virtual provide for gnulib according to http://fedoraproject.org/wiki/Packaging:No_Bundled_Libraries 
    Resolves: #812067 #821776


author: Martin Briza <mbriza@redhat.com> - 4.2.2-1
changelog:
  - New release
  - Dropping included patches: sed-4.2.1-data-loss.patch sed-4.2.1-fix-0x26-on-RHS.patch sed-4.2.1-makecheck.patch
  - Dropping unused patch sed-4.2.1-dummyparam.diff
  - Regenerated sed-4.2.{1,2}-copy.patch
  - Minor change to patching (creating backup files)


author: Jan Pacner <jpacner@redhat.com> - 4.2.2-5
changelog:
  - Related: #948598 (Man page scan results for sed; introduce -c argument, add
    help for -b --binary arguments, cleanup arguments & help)


author: Miroslav Grepl<mgrepl@redhat.com> 3.12.1-144
changelog:
  - allow anaconda to dbus chat with systemd-localed
  - Add fixes for haproxy based on bperkins@redhat.com
  - Allow cmirrord to make dmsetup working
  - Allow NM to execute arping
  - Allow users to send messages through talk
  - Add userdom_tmp_role for secadm_t


author: Miroslav Grepl<mgrepl@redhat.com> 3.12.1-145
changelog:
  - Allow also unpriv user to run vmtools
  - Allow secadm to read /dev/urandom and meminfo
  Resolves:#1079250
  - Add booleans to allow docker processes to use nfs and samba
  - Add mdadm_tmpfs support
  - Dontaudit net_amdin for /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.51-2.4.5.1.el7.x86_64/jre-abrt/bin/java running as pki_tomcat_t
  - Allow vmware-user-sui to use user ttys
  - Allow talk 2 users logged via console too
  - Allow ftp services to manage xferlog_t
  - Make all pcp domanis as unconfined for RHEL7.0 beucause of new policies
  - allow anaconda to dbus chat with systemd-localed


author: Miroslav Grepl<mgrepl@redhat.com> 3.12.1-146
changelog:
  - add gnome_append_home_config()
  - Allow thumb to append GNOME config home files
  - Allow rasdaemon to rw /dev/cpu//msr
  - fix /var/log/pki file spec
  - make bacula_t as auth_nsswitch domain
  - Identify pki_tomcat_cert_t as a cert_type
  - Define speech-dispater_exec_t as an application executable
  - Add a new file context for /var/named/chroot/run directory
  - update storage_filetrans_all_named_dev for sg* devices
  - Allow auditctl_t  to getattr on all removeable devices
  - Allow nsswitch_domains to stream connect to nmbd
  - Allow unprivusers to connect to memcached
  - label /var/lib/dirsrv/scripts-INSTANCE as bin_t


author: Miroslav Grepl<mgrepl@redhat.com> 3.12.1-147
changelog:
  - Back port fixes for pegasus_openlmi_admin_t from rawhide
  Resolves:#1080973
  - Add labels for ostree
  - Add SELinux awareness for NM
  - Label /usr/sbin/pwhistory_helper as updpwd_exec_t


author: Miroslav Grepl<mgrepl@redhat.com> 3.12.1-148
changelog:
  - Allow kdm to send signull to remote_login_t process
  - Add gear policy
  - Turn on gear_port_t
  - Allow cgit to read gitosis lib files by default
  - Allow vdagent to read xdm state
  - Allow NM and fcoeadm to talk together over unix_dgram_socket


author: Miroslav Grepl<mgrepl@redhat.com> 3.12.1-149
changelog:
  - Allow xauth_t to read user_home_dir_t lnk_file
  - Add labeling for lightdm-data
  - Allow certmonger to manage ipa lib files
  - Add support for /var/lib/ipa
  - Allow pegasus to getattr virt_content
  - Added some new rules to pcp policy
  - Allow chrome_sandbox to execute config_home_t
  - Add support for ABRT FAF


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-151
changelog:
  - varnishd wants chown capability
  - update ntp_filetrans_named_content() interface
  - Add additional fixes for neutron_t. #1083335
  - Dontaudit getattr on proc_kcore_t
  - Allow pki_tomcat_t to read ipa lib files
  - Allow named_filetrans_domain to create /var/cache/ibus with correct labelign
  - Allow init_t run /sbin/augenrules
  - Add dev_unmount_sysfs_fs and sysnet_manage_ifconfig_run interfaces
  - Allow unpriv SELinux user to use sandbox
  - Add default label for /tmp/hsperfdata_root


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-152
changelog:
  - Fix Multiple same specifications for /var/named/chroot/dev/zero
  - Add labels for /var/named/chroot_sdb/dev devices
  - Add support for strongimcv
  - Use kerberos_keytab_domains in auth_use_nsswitch
  - Update auth_use_nsswitch to make all these types as kerberos_keytab_domain to
  - Allow net_raw cap for neutron_t and send sigkill to dnsmasq
  - Fix ntp_filetrans_named_content for sntp-kod file
  - Add httpd_dbus_sssd boolean
  - Dontaudit exec insmod in boinc policy
  - Rename kerberos_keytab_domain to kerberos_keytab_domains
  - Add kerberos_keytab_domain()
  - Fix kerberos_keytab_template()
  - Make all domains which use kerberos as kerberos_keytab_domain
  Resolves:#1083670
  - Allow kill capability to winbind_t


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.6-2
changelog:
  - Fixed milter_helo regression (milter-helo-fix patch)
    Resolves: rhbz#895552
  - Fixed bogus dates in changelog


author: Dan Walsh <dwalsh@redhat.com> - 3.0.52-1
changelog:
  - Update Translations
  - Only translate catchall_boolean descritpions if the are not unicode to start with.


author: Dan Walsh <dwalsh@redhat.com> - 3.0.53-1
changelog:
  - Update Translations
  - Add sandbox_connect plugin to point out the use of alternate types with the sandbox -X command.


author: Dan Walsh <dwalsh@redhat.com> - 3.0.57-1
changelog:
  - Add restorecon_source plugin, to check the source program is labeled correclty.
  - Fix restorecon.py to handle customized_files properly.
  - Update Translations


author: Ondrej Vasik <ovasik@redhat.com> 2.8.66-1
changelog:
  - assign :190 gid for systemd-journal (#918120)
  - assign 191:191 uidgid pair for systemd-journal-gateway (#918120)


author: Ondrej Vasik <ovasik@redhat.com> 2.8.67-1
changelog:
  - assign 166:166 uidgid pair for ceilometer (#923891)
  - change 187:187 reservation from openstack-heat
    to just heat(#923858)
  - longer shell names support caused by UsrMove to
    the /etc/shells (#922527)
  - drop gopher (uid 13, gid 30) from groups created by default
    -> dropped completely - no gopher server in Fedora (#918206)
  - drop dip (gid 40) from groups created by default
    -> moved to ppp (#918206)
  - drop uucp (uidgid 14) from groups created by default
    -> moved to uucp (#918206)
  - create cdrom, tape, dialout, floppy groups in setup(#919285)


author: Ondrej Vasik <ovasik@redhat.com> - 2.8.71-3
changelog:
  - add more securetty required for mainframes (#1067347)
  - set SHELL envvar to /bin/bash in bashrc (#1063552)


author: Dan Horák <dan@danny.cz> - 1.37-5
changelog:
  - fix various man pages (#948463)
  - add man page for the rescan-scsi-bus.sh script (#948463)
  - Resolves: #948463


author: Richard W.M. Jones <rjones@redhat.com> - 0-1.1.20110622svn
changelog:
  - Fix date in release string.
    NB: To make this version > than the previous, I had to use 1.1.20110622
    instead of 0.1.20110622, since the old second field was 20110623.
  - Unset MAKEFLAGS, since parallel make breaks the build.
  - Bring the spec file up to modern standards.


author: Jan Synáček <jsynacek@redhat.com> - 1.2.0.10-9
changelog:
  - dos2unix'ed the patch
  - Call dos2unix before patching and dos2unix Makefile as well
  - Use %{_sbindir} instead of '/sbin'


author: Tomas Mraz <tmraz@redhat.com> - 2:4.1.5.1-6
changelog:
  - report error to stdout when SELinux context for home directory
    cannot be determined (#973647)
  - audit the changing home directory owner (#885797)
  - do not set the default SELinux MLS range (#852676)


author: Tomas Mraz <tmraz@redhat.com> - 2:4.1.5.1-8
changelog:
  - slightly more meaningful error messages if crypt() returns NULL (#988184)
  - explicit suid permissions


author: Petr Pisar <ppisar@redhat.com> - 4.13.3-2
changelog:
  - Fix decoding from positional argument while overriding output file
    (bug #901895)
  - Fix decoding to standard output when output file is - or /dev/stdout
    (bug #901895)


author: Mathieu Bridon <bochecha@fedoraproject.org> - 1.0-8
changelog:
  - Fix Obsolete: that was wrong when renaming the package.
  - The font base folder was listed twice (one was hidden in the font macro)


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 2.3.0-6
changelog:
  - Add ASM dependency only to a single module, not all of them
  - Disable animal-sniffer plugin
  - Don't generate auto-requires for optional dependencies


author: Michal Srb <msrb@redhat.com> - 2.3.0-7
changelog:
  - sisu-inject-bean: add dependency on asm
  - Fix dependencies on javax.inject and javax.enterprise.inject
  - Remove bundled JARs and .class files from tarball


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 2.3.0-8
changelog:
  - Remove unneeded animal-sniffer BuildRequires
  - Add forge-parent to BuildRequires to ensure it's present


author: Nalin Dahyabhai <nalin@redhat.com> - 0.47.6-1
changelog:
  - only buildrequire libsss_nss_idmap-devel on releases that included SSSD
    version 1.10 or later, where it first appeared


author: Nalin Dahyabhai <nalin@redhat.com> - 0.47.7-1
changelog:
  - fix building against versions of directory server older than 1.3.0, which
    first introduced slapi_escape_filter_value()


author: Nalin Dahyabhai <nalin@redhat.com> - 0.48-1
changelog:
  - try to gracefully handle failures obtaining internal locks
  - fix locating-by-name of entries with names that require escaping
  - add self-tests for nsswitch and PAM functionality
  - make nsswitch mode properly handle user and group names with commas in them
  - handle attempts to PAM authenticate to compat groups (i.e., with failure)
  - drop the "schema-compat-origin" attribute


author: Nalin Dahyabhai <nalin@redhat.com> - 0.49-1
changelog:
  - add {nis,schema-compat}-ignore-subtree and -restrict-subtree settings,
    which should let us avoid deadlocks when tasks are modifying data in
    the backend database (#1007451)


author: Nalin Dahyabhai <nalin@redhat.com> - 0.50-1
changelog:
  - if we get an EPIPE while registering with rpcbind, try to reconnect and
    retransmit before giving up


author: Nalin Dahyabhai <nalin@redhat.com> - 0.51-1
changelog:
  - fix another request argument memory leak in NIS server (#1040159)
  - fix miscellaneous items found by static analysis


author: Nalin Dahyabhai <nalin@redhat.com> - 0.52-1
changelog:
  - correctly reflect whether or not we're built with transaction support in
    the module's nsslapd-pluginVersion attribute
  - fix a couple of should've-used-memmove()-instead-of-memcpy() cases which
    would hit when removing maps or groups of maps (#1043546/#1043638)


author: Nalin Dahyabhai <nalin@redhat.com> - 0.52-3
changelog:
  - remove ExclusiveArch if %{rhel} is 7 or higher, because 389-ds-base gets
    built for everything now (#1055711)


author: Rex Dieter <rdieter@fedoraproject.org> - 6:4.10.3-2
changelog:
  - pull in a few upstream fixes, including a couple minor security issues
  - Crash in DialogShadows::Private::freeX11Pixmaps() (kde#319137)


author: Martin Briza <mbriza@redhat.com> - 4.10.5-3
changelog:
  - make kpac_dhcp_helper full relro
  - set the variables in the generated cmake files to contain both 64b and 32b paths
  - hide "command not found" for one pkg-config invocation in the spec
  - fix macro expansion in the spec changelog
  - Resolves: #884052


author: Martin Briza <mbriza@redhat.com> - 4.10.5-4
changelog:
  - use a better way to figure out if lib or lib64 should be used
  - use -fno-strict-aliasing for type punned source files
  - Resolves: #884052


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-20
changelog:
  - Fix: tools: Fixes formatting of remote-nodes in crm_mon and crm_simulate
  - Fix: Corosync: Attempt to retrieve a peers node name if it is not already known
      Resolves: rhbz#720543


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-23
changelog:
  - mcp: Tell systemd not to respawn us if we return 100
  - services: Detect missing agents and permission errors before forking
  - Use native DBus library for systemd support to avoid problematic use of threads
      Resolves: rhbz#720543 (aka. 1057697)


author: David Vossel <dvossel@redhat.com> - 1.1.10-24
changelog:
  - controld: handling startup fencing within the controld agent, not the dlm
      Resolves: rhbz#1064519
  - controld: Do not consider the dlm up until the address list is present
      Resolves: rhbz#1067536


author: David Vossel <dvossel@redhat.com> - 1.1.10-25
changelog:
  - pengine: cl#5187 - Prevent resources in an anti-colocation from even temporarily running on a same node
      Resolves: rhbz#1069284


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-26
changelog:
  - Run automated regression tests after every build
  - Fencing: Send details of stonith_api_time() and stonith_api_kick() to syslog
  - Fencing: Pass the correct options when looking up the history by node name
  - Fencing: stonith_api_time_helper now returns when the most recent fencing operation completed
  - crm_report: Additional dlm detail if dlm_controld is running
  - crmd: Gracefully handle actions that cannot be initiated
  - pengine: Gracefully handle bad values for XML_ATTR_TRANSITION_MAGIC
      Resolves: rhbz#1070916


author: Andrew Beekhof <beekhof@redhat.com> - 1.1.10-27
changelog:
  - crm_resource: Prevent use-of-NULL
  - systemd: Prevent use-of-NULL when determining if an agent exists
  - Fencing: Remove shadow definition and use of variable 'progress'
      Resolves: rhbz#1070916


author: David Vossel <dvossel@redhat.com> - 1.1.10-28
changelog:
  - Fix: pengine: fixes invalid transition caused by clones with more than 10 instances
      Resolves: rhbz#1078504


author: Rajeesh K Nambiar <rajeeshknambiar@gmail.com> 5.0.1-1
changelog:
  - New upstream release 5.0.1 introducing Unicode 5.1 compatibility
  - Resolves Meera size issues
  - Drop upstreamed patches for RHBZ# 545683, 616324 and 781938
  - Resolves RHBZ# 803183
  - Spec cleanup


author: Pravin Satpute <psatpute@redhat.com> 5.0.1-2
changelog:
  - Resolved bug 803234
  - Updated panose for Meera, RaghuMalayalam and Kalyani
  - Changed conf file of Rachana from Sans to Serir


author: Pravin Satpute <psatpute@redhat.com> 6.0-1
changelog:
  - Resolves: rh#1023847 - Upstream new release with fix against Harfbuzz NG
  - New release 6.0 with many new features and bug fixes
  - v2 opentype spec support for Malayalam (mlm2) for Meera, Rachana, Raghumalayalam
  - Full support to Harfbuzz, Adobe and Uniscribe shaping engines
  - Cleaned up and updated lookup tables
  - Meaningful names to glyphs to help with Lookup tables reusability
  - Old Figures and other Typographical glyphs to Rachana
  - Dotreph positioning using GPOS 'abvm' lookup
  - Unicode 6.1 Malayalam glyphset for many fonts


author: Michal Srb <msrb@redhat.com> - 1.11-5
changelog:
  - Replace bundled base64 implementation
  - Replace bundled gdata-java-client classes with apache-commons-codec


author: Ondrej Kozina <okozina@redhat.com> - 0.1.2-1.20130211git676556f
changelog:
  - updated to latest upstream version
  - fixed wrong include: "auto_ptr.h" -> <memory>
  - moved diffutils dependency to client


author: Ondrej Kozina <okozina@redhat.com> - 0.1.3-1.20130418git7ca81a2
changelog:
  - updatet to latest upstream version
  - add support to compare extended attributes ('xadiff' command)
  - add support to revert modificiations in file's extended attributes
  - patch: avoid useless build dependency on libattr-devel


author: Ondrej Kozina <okozina@redhat.com> - 0.1.5-1
changelog:
  - updated to latest upstream
  - allow whitespace in ALLOW_USERS and ALLOW_GROUPS in snapper's config
  - enable new pam module
  - patch: pam module installed in proper libdir


author: Ondrej Kozina <okozina@redhat.com> - 0.1.7-3
changelog:
  - enable btrfs compare using send/receive in libbtrfs
  - patch: adapt sources to change in libtrfs API (btrfs_read_and_process_send_stream)
  - Resolves: #1055579


author: Ondrej Kozina <okozina@redhat.com> - 0.1.7-5
changelog:
  - patch: Fix failure in invoking btrfs internal comparison of subvolumes
  - patch: Remove references to missing programs from man pages
  - Resolves: #1060806, #1063844


author: Ondrej Kozina <okozina@redhat.com> - 0.1.7-6
changelog:
  - patch: Add norecovery option mounting XFS read-only snapshot
  - patch: Fix ACL modification failure with XFS filesystem
  - patch: Sync SELinux context of .snapshots subvolume (btrfs only)
  - Resolves: #1064111, #1065969, #1069312


author: Pierre-Yves Chibon <pingou@pingoured.fr> - 0.11.6-12
changelog:
  - Add m2crypto as R
  - Change License
  - Update spec
  -   All these changes comes from Toshio's patch BZRH #602932


author: Paul Wouters <paul@nohats.ca> - 1.7.2.0-1
changelog:
  - Upgraded to 1.7.2.0 which allows tun/tap interfaces without IP address
    and introduces options openssl-compress and max-children.


author: Paul Wouters <pwouters@redhat.com> - 1.7.2.1-1
changelog:
  - Updated to 1.7.2.1 for CVE-2012-0219, rhbz#821553, rhbz#821688
  - Remove patch merged upstream
  - Remove --disable-fips from configure


author: Paul Wouters <pwouters@redhat.com> - 1.7.2.2-2
changelog:
  - Resolves: rhel#1017015 Use readline, not compat-readline5-devel
  - Added two patches fixing -Wformat issues
  - Enable hardened build
  - Cleanup obsolete spec file lines


author: Bryn M. Reeves <bmr@redhat.com> = 3.0-15
changelog:
  - Remove debug statements from logs plugin
    Resolves: bz1030042
  - Make ethernet interface detection more robust
    Resolves: bz1030824
  - Fix specifying multiple plugin options on the command line
    Resolves: bz1031124
  - Make log and message levels match previous versions
    Resolves: bz1031126
  - Log a warning message when external commands time out
    Resolves: bz1034956
  - Remove --upload command line option
    Resolves: bz1028484
  - Update sos UI text to match upstream
    Resolves: bz1034970


author: Bryn M. Reeves <bmr@redhat.com> = 3.0-16
changelog:
  - Add new plugin to collect OpenHPI configuration
    Resolves: bz1028121
  - Fix cluster plugin crm_report support
    Resolves: bz1030553
  - Fix file postprocessing in ldap plugin
    Resolves: bz1030602
  - Remove collection of anaconda-ks.cfg from general plugin
    Resolves: bz1034865


author: Bryn M. Reeves <bmr@redhat.com> = 3.0-17
changelog:
  - Fix get_option use in cluster plugin
    Resolves: bz1030553
  - Fix debug logging to file when given '-v'
    Resolves: bz1031126
  - Always treat rhevm plugin's vdsmlogs option as a string
    Resolves: bz1030617
  - Run the rhsm-debug script from yum plugin
    Resolves: bz1039036


author: Bryn M. Reeves <bmr@redhat.com> = 3.0-18
changelog:
  - Prevent file descriptor leaks when using Popen
    Resolves: bz1051009
  - Disable zip archive creation when running rhsm-debug
    Resolves: bz1039036
  - Include volume geo-replication status in gluster plugin
    Resolves: bz1036752


author: Bryn M. Reeves <bmr@redhat.com> = 3.0-19
changelog:
  - Fix generation of volume names in gluster plugin
    Resolves: bz1036752
  - Add distupgrade plugin
    Resolves: bz1059760


author: Adrian Reber <adrian@lisas.de> - 3.1.6-1
changelog:
  - updated to 3.1.6
  - removed buildroot and clean section
  - fixed "missing c++ source language detection for .cxx extension" (#728311)
  - fixed "source-highlight : Conflicts with autoconf-archive" (#797794)


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 14.4.1-4
changelog:
  - removed liblpc10 from source tarball due to licensing uncertainity
  - added license file to libgsm
  - fixed bogus dates in changelog


author: Kevin Fenzi <kevin@scrye.com> - 3.3.2-12
changelog:
  - Fix sa-update not detecting spamd running. Fixes bug #755644
  - Add restart=always to systemd file to work around upstream bug. Bug #812359


author: Petr Lautrbach <plautrba@redhat.com> 3.3.2-17
changelog:
  - document rawbody's split into chunks (#892350)
  - avoid using array of cleaned uris <fkrska@redhat.com> (#892348)


author: Miroslav Lichvar <mlichvar@redhat.com> - 1.2-0.17.rc1
changelog:
  - update config.guess and config.sub for aarch64 (#926562)
  - make some dependencies arch-specific
  - remove obsolete macros


author: Yonit Halperin <yhalperi@redhat.com> 0.12.4-1
changelog:
  - New upstream release 0.12.4
  - Require libjpeg-turbo-devel instead of libjpeg-devel
  - Remove "BuildRequires: spice-protocol" from spice-server
  - Add "Requires: spice-protocol" to spice-server-devel.


author: Hans de Goede <hdegoede@redhat.com> - 0.12.4-1
changelog:
  - Add patches from upstream git to fix sound-channel-free crash (rhbz#986407)
  - Add Obsoletes for dropped spice-client sub-package


author: Christophe Fergeau <cfergeau@redhat.com> 0.12.4-5
changelog:
  - Fix qemu crash during migration with reboot
    Resolves: rhbz#1016795
  - Monitor whether the client is alive
    Resolves: rhbz#1016790


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 15-7
changelog:
  - Fix build requires and requires (#884632)
  - Cleanup specfile for latest guidelines 
  - Add ASL license text


author: Hans de Goede <hdegoede@redhat.com> - 0.12.0-2
changelog:
  - Fix setting of mode on non arbitrary resolution capable X driver
  - Fix wrong mouse coordinates on vms with multiple qxl devices


author: Hans de Goede <hdegoede@redhat.com> - 0.14.0-1
changelog:
  - New upstream release 0.14.0
  - Adds support for file transfers from client to guest
  - Adds manpages for spice-vdagent and spice-vdagentd


author: Hans de Goede <hdegoede@redhat.com> - 0.14.0-3
changelog:
  - Advertise clipboard line-endings for copy and paste line-ending conversion
  - Build spice-vdagentd as pie + relro


author: Hans de Goede <hdegoede@redhat.com> - 0.14.0-5
changelog:
  - Silence session agent error logging when not running in a vm (rhbz#999804)
  - Release guest clipboard ownership on client disconnect (rhbz#1003977)


author: Jan Stanek <jstanek@redhat.com> - 3.7.16.2-1
changelog:
  - update to 3.7.16.2 (http://www.sqlite.org/releaselog/3_7_16_2.html)
  - add support for aarch64 (rerunning autoconf) (#926568)


author: Bruno Wolff III <bruno@wolff.to> - 4.3-0.17.git5c6f0024
changelog:
  - Latest pre 4.3 snapshot
  - Includes fix for mksquashfs hangs
  - Switch to get pre-release updates from the stable branch at kernel.org


author: Bruno Wolff III <bruno@wolff.to> - 4.3-0.18.gitaae0aff4
changelog:
  - Latest pre 4.3 stable snapshot
  - A few minor bug fixes
  - Improvements in getting status info while running unsquashfs


author: Doug Ledford <dledford@redhat.com> - 0.0.4-13
changelog:
  - Further tweaks to LSB init script headers
  - Add a %post and %preun scriptlets to add/remove the init script


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-56
changelog:
  - Related: rhbz#1072995 -  AD group inconsistency when using AD provider
                             in sssd-1.11-40


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-57
changelog:
  - Related: rhbz#1066096 - not retrieving homedirs of AD users with
                            posix attributes


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-58
changelog:
  - Related: rhbz#1073635 - IPA SELinux code looks for the host in the wrong
                            sysdb subdir when a trusted user logs in


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-59
changelog:
  - Related: rhbz#1075621 - Add another Kerberos error code to trigger IPA
                            password migration


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-60
changelog:
  - Resolves: rhbz#1075663 - SSSD should create the SELinux mapping file
                             with format expected by pam_selinux


author: Sumit Bose <sbose@redhat.com> - 1.11.2-63
changelog:
  - Resolves: rhbz#1078877 - Valgrind: Invalid read of int while processing
                             netgroup


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-64
changelog:
  - Resolves: rhbz#1077328 - other subdomains are unavailable when joined
                             to a subdomain in the ad forest


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-65
changelog:
  - Resolves: rhbz#1082191 - RHEL7 IPA selinuxusermap hbac rule not always
                             matching


author: Pavel Raiskup <praiskup@redhat.com> - 1.5.2-1
changelog:
  - rebase to most up2date upstream tarball, remove patches already upstream, fix
    code movements in patches (#928758)
  - fix man-page-day objections (private #948866)
  - fix the build for aarch64 (#926571)


author: Pavel Raiskup <praiskup@redhat.com> - 1.5.2-2
changelog:
  - package spax and scpio separately (#959917)
  - fedora-review fixes, unapplied patch
  - make the spax to be pax alternative (#960007)


author: Pavel Raiskup <praiskup@redhat.com> - 1.5.2-7
changelog:
  - we should provide /etc/rmt symlink for a while (related to #968980)
  - use the ssh as the default remote access method


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 1.1.0-1
  — Update to new stable release
  — Major refactoring now that some sanity prevailed upstream in font naming
    Be careful if you used the old font family names


author: Dmitry V. Levin <ldv@altlinux.org> - 4.8-1
changelog:
  - New upstream release:
    + fixed ERESTARTNOINTR leaking to userspace on ancient kernels (#659382);
    + fixed decoding of *xattr syscalls (#885233);
    + fixed handling of files with 64-bit inode numbers by 32-bit strace (#912790);
    + added aarch64 support (#969858).


author: Jeff Law <ldv@altlinux.org> - 4.8-2
changelog:
  - Don't dereference dropped TCP (#971352).  From
    Jan Stancek.  Merged into patch for 851457.
  - Disable "net" test as it is highly timing dependent
    Merge into patch 851457.
  - Bring forward patches lost after resyncing with Fedora.
    - Patch to avoid strict aliasing warnings
    - Patch to add man page for strace-log-merge (#948577)
    - Patch to improve scheduling fairness (#851457)


author: Avesh Agarwal <avagarwa@redhat.com> - 5.1.0-2
changelog:
  - Fixed initialization crash of IMV and IMC particularly
    attestation imv/imc as libstrongswas was not getting initialized.


author: Avesh Agarwal <avagarwa@redhat.com> - 5.1.1-1
changelog:
  Resolves: #1049523
  Resolves: #1036846
  Resolves: #1007548
  - Modified spec file significantly to reflect the current state of
    the package, as this rebase enables several major modules: TNC
    client and server (IF-TNCCS), IMC-IMV (IF-M), PT-TLS (RFC 6876),
    SWID IMC/IMV, charon daemon and it related libs and modules,
    tnc-pdp, tnc-ifmap plugins.


author: Avesh Agarwal <avagarwa@redhat.com> - 5.1.1-2
changelog:
  Resolves: #1049523
  Resolves: #1036846
  Resolves: #1007548
  - A typo caused a patch not being applied, so fixed that and
    bumping the number number.


author: Avesh Agarwal <avagarwa@redhat.com> - 5.1.1-4
changelog:
  Resolves:#1067119
  - Fixed full hardening for strongswan (full relro and PIE).
    The previous macros had a typo and did not work
    (see bz#1067119).
  - Fixed files permissions for executables and config files to
    correctly reflect their intent.
  - Fixed tnc package description to eliminate rpmlint errors.
  - Fixed pki binary and moved it to /usr/libexece/strongswan as
    others binaries are there too to eliminate rpmlint errors.
  - Fixed systemd service name to "strongimv TNC".
  - Removed the dependency on gmp-devel


author: Avesh Agarwal <avagarwa@redhat.com> - 4.55-1
changelog:
  - New upstream realease 4.55
  - Updated local patches
  - enabled fips mode
  - Fixed for pod2man as it build-requires perl-podlators


author: Avesh Agarwal <avagarwa@redhat.com> - 4.56-1
changelog:
  - New upstream realease 4.56.
  - Updated local patches.
  - Fixed upstream URL in spec file.
  - Sourced URL of sha256 hash file in spec file.


author: ckozak <ckozak@redhat.com> 1.10.11-1
changelog:
  - 1018807: Ensure virt facts are a single line (bkearney@redhat.com)
  - 1007580: Print blank spaces if there is no contract number on the list
    command (bkearney@redhat.com)
  - Fedora 18 is at end of life. (awood@redhat.com)
  - Updated translations. (dgoodwin@redhat.com)
  - 104338: add default dest dir to rhsm-debug help (alikins@redhat.com)
  - 1042897: add proxy info to rhsm-debug completion (alikins@redhat.com)
  - 914833: rct cat-cert output reports an Order: Subscription: field.
    (wpoteat@redhat.com)
  - 1052297: delay import of site module (ckozak@redhat.com)
  - set default encoding to utf-8 in rhsm-debug and migrate scripts
    (ckozak@redhat.com)
  - 1048325: Set default encoding to utf-8 when running the rct script
    (ckozak@redhat.com)
  - 1050850: re-evaluate system facts when checking for updates
    (ckozak@redhat.com)
  - Some refactoring of rhsm-debug (alikins@redhat.com)
  - Additional improvements to rhsm-debug (wpoteat@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.12-1
changelog:
  - added testing for the pooltype cache (ckozak@redhat.com)
  - 961003: Stricter matches for rhel product tags (alikins@redhat.com)
  - 1059809: Cache pool types to avoid unnecessary api calls (ckozak@redhat.com)
  - 1059809 Improve attach and remove performance add progress bar
    (ckozak@redhat.com)
  - 908869: Fix the mis-transated options in pt-BR (bkearney@redhat.com)
  - 1044596: handle http,socket,ssl fetching release (alikins@redhat.com)
  - dont always print exception message (ckozak@redhat.com)
  - 1044596: Make release listing handle empty data (alikins@redhat.com)
  - 1020423: update help messages (jesusr@redhat.com)
  - Fix incorrect patching. (awood@redhat.com)
  - Mock ProductDatabase so tests can run without a productid.js file
    (awood@redhat.com)
  - 825388: Properly wrap text when reaching dialog limit (mstead@redhat.com)
  - 1021443: display Consumer deleted message (jesusr@redhat.com)
  - Altering titles per mreid conversation. (wpoteat@redhat.com)
  - 1039736: Fix missed reference to CloudForms in tooltip. (dgoodwin@redhat.com)
  - Fix ta_IN translation problem. (dgoodwin@redhat.com)
  - Lock timezone to EST5EDT in timezone tests. (awood@redhat.com)
  - 1005329: add at-spi locator to the SLA selection table (ckozak@redhat.com)
  - 1039914: Update the rhsm-debug man page (bkearney@redhat.com)
  - 874169: Fix label alignment in progress UI (mstead@redhat.com)
  - 1020361: Replace the use of the term Valid with Current in the status command
    (bkearney@redhat.com)
  - 1028596: Add the repo-override command to the subscription-manager man page
    (bkearney@redhat.com)
  - 1020522: Update the man page for subscription-manager with new list options
    (bkearney@redhat.com)
  - Pull in the latest strings from zanata. (bkearney@redhat.com)
  - 1057719: adding a small section on deprecated commands (dlackey@redhat.com)
  - 1017354: remove msg printed to stderr via yum (alikins@redhat.com)
  - 857147: Auto-subscribe window has a confusing name (wpoteat@redhat.com)
  - Use dateutil.tz instead of pytz. (awood@redhat.com)
  - 883486: The local time's start/end dates rendered in the list
    --available/--consumed incorrect (wpoteat@redhat.com)
  - 1049037: Add conditional requires on migration data package.
    (awood@redhat.com)
  - 973938: correctly handle SIGPIPE in rct (ckozak@redhat.com)
  - 878089: Add line wrapping when listing subscription-manager modules
    (ckozak@redhat.com)
  - 1017354: Ensure all message go to stdout, not stderr (bkearney@redhat.com)
  - 851325: Anchor choose server "default" button beside the text box.
    (dgoodwin@redhat.com)
  - 1039739: Add 96x96 and 256x256 icons (bkearney@redhat.com)
  - 873967: Move choose server tooltips closer to the elements they assist with.
    (dgoodwin@redhat.com)
  - 1044686: Make serverurl parse error detailed again (alikins@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.13-1
changelog:
  - 1060917: catch exception thrown in firstboot (ckozak@redhat.com)
  - Extract the latest strings (bkearney@redhat.com)
  - 995121: require gnome-icon-theme for calendar icon (alikins@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.14-1
changelog:
  - Use glob for finding entitlement certs to remove. (dgoodwin@redhat.com)
  - Make sure entitlement cert directory exists before we clean it out.
    (dgoodwin@redhat.com)
  - safer default args in AsyncWidgetUpdater (ckozak@redhat.com)
  - use enumerate instead of confusing myself (ckozak@redhat.com)
  - Pull in latest strings from zanata (bkearney@redhat.com)
  - make sure entitlement has a pool before reading it (ckozak@redhat.com)
  - quickly load preferences (ckozak@redhat.com)
  - 1061937: preference changes occur in the background (ckozak@redhat.com)
  - use existing signals (ckozak@redhat.com)
  - simplify preferences window (ckozak@redhat.com)
  - Fix test failure if run on system that is registered. (dgoodwin@redhat.com)
  - 1061393: Don't allow subscription-manager string to be translated
    (ckozak@redhat.com)
  - 1016427: On string was missed from the extraction (bkearney@redhat.com)
  - 1058495: productid yum errors on yum remove (alikins@redhat.com)
  - 1026501: Preserve PKI directories and have rpm own them.
    (dgoodwin@redhat.com)
  - 1058374: Fix crash on exception in managergui._show_buttons
    (ckozak@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.14-2
changelog:
  - updated tito.props to rev release (ckozak@redhat.com)
  - 958016: use rpm %{optflags} and _hardended_build (alikins@redhat.com)
  - 851325: Tweak activation key checkbox to left (alikins@redhat.com)
  - 1044596: Don't match beta product tags for release (alikins@redhat.com)
  - 1060727: Changes to rhsm-debug for sos report (wpoteat@redhat.com)
  - removed other releasers (ckozak@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.14-3
changelog:
  - 906567: Fix translations of "Red Hat" (alikins@redhat.com)
  - 1039914: rhsm-debug updates and fixes (alikins@redhat.com)
  - 1038242: add anaconda.pid check before chroot (alikins@redhat.com)
  - 1030378,1020474: Latest translations from zanata (alikins@redhat.com)
  - 1055664: rhsm-debug now follows more config paths (alikins@redhat.com)
  - 1021069: Add reference to network usage info. (alikins@redhat.com)
  - 1035115: Update product id certs (alikins@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.14-4
changelog:
  - 1030378: Latest strings from zanata. (alikins@redhat.com)
  - 1070737: correct config section for ca_cert_dir (ckozak@redhat.com)
  - Use systemd RPM macros to make life easier. (awood@redhat.com)


author: ckozak <ckozak@redhat.com> 1.10.14-5
changelog:
  - 1070908: Don't count cpus without topo for lpar (alikins@redhat.com)
  - 865702: Dont render exc messages with bogus markup (alikins@redhat.com)
  - 1074568: Use our translations in optparser (ckozak@redhat.com)
  - 1075167: Avoid using injected values in migrate-classic-to-rhsm
    (ckozak@redhat.com)
  - 1020474: Strings are 100% translated again. (alikins@redhat.com)


author: Alex Wood <awood@redhat.com> 2.0.2-1
changelog:
  - Updating product cert mappings. (awood@redhat.com)
  - Point to newest rcm-metadata (awood@redhat.com)
  - Adding file explaining how to build on Fedora. (awood@redhat.com)


author: Alex Wood <awood@redhat.com> 2.0.4-1
changelog:
  - Adding RHEL 6.5 certificates. (awood@redhat.com)
  - Detect invalid channels more generally. (awood@redhat.com)


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.6p7-3
changelog:
  - synced sudoers, configure options & configuration files with
    expected RHEL configuration
    Resolves: rhbz#969373
    Resolves: rhbz#971009
    Resolves: rhbz#965124
    Resolves: rhbz#971013
    Resolves: rhbz#839705


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.6p7-5
changelog:
  - added standalone manpage for sudo.conf and sudo-ldap.conf
  - spec file cleanup
    Resolves: rhbz#881258


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.6p7-6
changelog:
  - fixed alias cycle detection code
  - added debug messages for tracing of netgroup matching
  - fixed aborting on realloc when displaying allowed commands
  - sssd: filter netgroups in the sudoUser attribute
  - parse uids/gids more strictly
  - added debug messages to trace netgroup matching
    Resolves: rhbz#1026904
    Resolves: rhbz#1026890
    Resolves: rhbz#1007014
    Resolves: rhbz#1026894
    Resolves: rhbz#1000389
    Resolves: rhbz#994566


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.6p7-11
changelog:
  - Fixed incorrect login shell path construction in sesh
    (thanks fkrska@redhat.com for the patch)
    Resolves: rhbz#1065418


author: Nils Philippsen <nils@redhat.com> - 4.0.2-10
changelog:
  - ship licenses as documentation in the base package (#1019315)
  - hardlink duplicate documentation/license files


author: Richard W.M. Jones <rjones@redhat.com> - 1:3.21-2
changelog:
  - Add upstream patch to drop supplemental groups (RHBZ#902476).
  - Remove 'Group:' RPM headers which are no longer necessary.
  - Remove some commented-out requirements.


author: Richard W.M. Jones <rjones@redhat.com> - 4.1.1-1
changelog:
  - New upstream version 4.1.1.
  - The program has been renamed 'supermin' from 'febootstrap'.
  - Obsolete, but don't Provide because supermin is not a compatible replacement.
  - Use '_isa' to specify architecture of supermin-helper subpackage.


author: Richard W.M. Jones <rjones@redhat.com> - 4.1.1-2
changelog:
  - Add upstream patch to ignore ghost non-regular files.
  - This fixes builds on Fedora 20 because the filesystem package has
    been changed so /var/lock and /var/run are marked as ghost.


author: Richard W.M. Jones <rjones@redhat.com> - 4.1.3-1
changelog:
  - New upstream version 4.1.3.
  - Remove patch which is now upstream.
  - Add examples directory to documentation.


author: Adam Tkac <atkac redhat com> 2.0.8-1
changelog:
  - update to 2.0.8 (#851364)
  - swig207-rh830660.patch merged
  - swig207-r13128.patch merged
  - swig-rh841245.patch merged


author: Jitka Plesnikova <jplesnik@redhat.com> - 2.0.10-1
changelog:
  - Update to 2.0.10
  - swig203-rh706140.patch merged
  - swig204-rh752054.patch merged
  - Create swig-2.0.10-Fix-x390-build.patch


author: Tim Waugh <twaugh@redhat.com> 1.4-4
changelog:
  - Applied patches from Jiri Popelka:
    - Fix off-by-one error in call to readlink.
    - Fix possible buffer overrun found by coverity.


author: Michael Schwendt <mschwendt@fedoraproject.org> - 4.05-2
changelog:
  - Remove old Obsoletes/Provides for syslinux-devel as such a subpkg
    was introduced with 3.83-2 (#756733).


author: Peter Jones <pjones@redhat.com> - 4.05-4
changelog:
  - Fix build problem from kernel-headers' removeal of ext2_fs.h
    (fix backported from as-yet-unreleased upstream version.)


author: Peter Schiffer <pschiffe@redhat.com> - 10.1.1-1
changelog:
  - resolves: #844387
    update to 10.1.1
  - keep log files for 28 days instead of 7
  - collect all aditional statistics


author: Peter Schiffer <pschiffe@redhat.com> - 10.1.2-1
changelog:
  - resolves: #863791
    updated to 10.1.2
  - resolves: #850333
    migrated to the new systemd-rpm macros
  - cleaned .spec file


author: Peter Schiffer <pschiffe@redhat.com> - 10.1.2-2
changelog:
  - added new -y option to iostat command to skip first since boot report if
    displaying multiple reports


author: Nils Philippsen <nils@redhat.com> - 1.10.0-1
changelog:
  - use pkexec instead of consolehelper
  - read/write /etc/localtime as symbolic link and only fall back to using
    /etc/sysconfig/clock if it is present (#824033)


author: Nils Philippsen <nils@redhat.com> - 1.10.1-1
changelog:
  - don't trip over missing /etc/sysconfig/network file (#857412)
  - pull updated translations
  - install and use timezone translations properly


author: Nils Philippsen <nils@redhat.com> - 1.10.5-1
changelog:
  - pull updated and new translations (#878319)
  - catch (rare) errors from fork()
  - catch unavailable display (#766936)
  - pull updated time zones


author: Thomas Woerner <twoerner@redhat.com> 1.2.29-4
changelog:
  - fixed possible privilege escalation flaw via use of python pickle
    (CVE-2011-2520), replaced pickle by json (rhbz#717985) and (rhbz#722991)
  - stop D-BUS firewall mechanism on update


author: Martin Milata <mmilata@redhat.com> - 2.0.13-1
changelog:
  - Update to 2.0.13
  - New version incorporates several bugfixes and adds support for x86 EFI
    systems


author: Martin Milata <mmilata@redhat.com> - 2.0.13-5
changelog:
  - Fix broken Reload button
  - Resolves: #1052042
  - Update default core_collector to use LZO compression
  - Resolves: #1047816


author: Martin Milata <mmilata@redhat.com> - 2.0.13-9
changelog:
  - Set PATH in backend so that zipl knows where to find dmsetup (affects only s390x)
  - Resolves: #1077113


author: Ville Skyttä <ville.skytta@iki.fi> - 1.3.1-11
changelog:
  - Add dependency on newt-python (#845391, Sandro Mani).
  - Fix bogus dates in %changelog and rpmlint tabs vs spaces warning.


author: Nils Philippsen <nils@redhat.com> - 1.3.1-12
changelog:
  - use consistent names for patches, create backup files
  - use polkit/pkexec instead of consolehelper
  - add man page


author: Nils Philippsen <nils@redhat.com> - 1.4.0-1
changelog:
  - version 1.4.0
  - remove ancient obsoletes and bogus requirements
  - require systemd >= 30 for localed
  - update gtk-update-icon-cache scriptlets


author: Chris Lumens <clumens@redhat.com> - 2.8.8-1
changelog:
  - Fix an importing bug caused by the previous patch. (clumens)
  - Don't traceback when starting up outside of X (#676338). (clumens)
  - Convert spec to UTF-8. (notting)


author: Chris Lumens <clumens@redhat.com> - 2.8.9-1
changelog:
  - Put /usr/share/system-config-kickstart at the front of the path (#820748). (clumens)
  - Fix "make local" to not pack up .git/ as well. (clumens)
  - Update Makefiles to work with new translation system. (clumens)
  - BuildRequires transifex-client. (clumens)
  - Ignore po/*.po files. (clumens)
  - Remove translation files. (clumens)
  - Fix translation files so "msgfmt -c " passes and they'll upload to transifex. (clumens)
  - Add transifex configuration file. (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.8.10-1
changelog:
  - Update glade file to fix translation building. (clumens)
  - Fix various problems when packaging up translations. (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.9.0-1
changelog:
  - Fix another problem updating the .po file.
  - Remove support for python-meh.  It requires gtk3.
  - Add the old anaconda GroupSelector.py to system-config-kickstart (#859928).
  - It helps to import the exceptions I want to catch (#893282).
  - Do @VERSION@ substitution on the main program, too (#866563).


author: Chris Lumens <clumens@redhat.com> - 2.9.1-1
changelog:
  - Fix an error reading the timezone in generate mode (#916346, #924764). (clumens)
  - Remove the documentation (#915737). (clumens)
  - Display hidden groups in the package selection UI (#915029). (clumens)
  - Default to SHA512, same as anaconda (#915013). (clumens)
  - Add the system-config-keyboard dep back in (#909355). (clumens)


author: Chris Lumens <clumens@redhat.com> - 2.9.2-1
changelog:
  - Transifex has moved, so update the config. (clumens)
  - Remove the Japanese-specific man page. (clumens)
  - Update the system-config-kickstart man page to something useful (#948447). (clumens)
  - Fix a typo. (clumens)


author: Parag Nemade <pnemade AT redhat DOT com> - 1.3.5-24
changelog:
  - Resolves:rh#956784 - Add Interlingua to the local-list file and include Interlingua localization to the package


author: Parag Nemade <pnemade AT redhat DOT com> - 1.4.0-2
changelog:
  - Resolves:rh#1040298 - OK button should be disabled always for the default selected language
  - Resolves:rh#1040309 - Fix 'No Group named...exists' dialog produced traceback & warning messages
  - Resolves:rh#1045993 - Change language name from Oriya to Odia.


author: Tim Waugh <twaugh@redhat.com> 1.4.1-8
changelog:
  - Fixed misplaced parenthesis (bug #979119).
  - Fixed another codec issue (bug #978970).
  - Avoid race when renaming printer (bug #975705).
  - Don't check for missing drivers in remote printers (bug #975058)
  - Another fix from the move to gi.repository (bug #973662).
  - Fixed another codec issue (bug #971973).


author: Nils Philippsen <nils@redhat.com> - 1.3.4-1
changelog:
  - don't ask libuser to create a home directory over an existing one (#908852,
    patch by Miloslav Trmač)
  - correct check if SELinux is enabled


author: Michal Sekletar <msekleta@redhat.com> - 208-2
changelog:
  - require redhat-release package
  - call systemd-tmpfiles after package installation (#1059345)
  - move preset policy out of systemd package (#903690)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 208-7
changelog:
  - setup tty permissions and group for /dev/sclp_line0 (#1070310)
  - cdrom_id: use the old MMC fallback (#1038015)
  - mount: don't send out PropertiesChanged message if actually nothing got changed (#1069718)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 208-8
changelog:
  - rules: mark loop device as SYSTEMD_READY=0 if no file is attached (#1067422)
  - utmp: make sure we don't write the utmp reboot record twice on each boot (#1053600)
  - rework session shutdown logic (#1047614)
  - introduce new stop protocol for unit scopes (#1064976)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 208-9
changelog:
  - fixes crashes in logind and systemd (#1073994)
  - run fsck before mouting root in initramfs (#1056661)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 208-11
changelog:
  - logind-session: save stopping flag (#1082692)
  - unit: add waiting jobs to run queue in unit_coldplug (#1083159)


author: Lukas Czerner <lczerner@redhat.com> 0.4-2
changelog:
  - Remove btrfs resize support (#986116)
  - Unmount all btrfs subvolumes when removing a filesystem
  - Fix size argument parsing for create and snapshot command
  - Fix list output for some cases
  - Add support to create encrypted volumes with crypt backend (#1012523)
  - Add dry-run option
  - Fix removing volumes with crypt backend
  - Add raid1 and raid10 support for lvm backend (#1012518)
  - Allow to check btrfs volumes (#986105)
  - Fix error handling when trying to resize btrfs subvolume (#986111)
  - Fix ssm mount command so it detects directory properly


author: Lukas Czerner <lczerner@redhat.com> 0.4-4
changelog:
  - Suppress backtrace when a command fails (#1054349)
  - Fix ssm to recognize units in new btrfs output properly (#1052327)
  - Use correct sysfs file to get size for a partition (#1053651)
  - Fix ssm to be able add a device with signature to btrfs file system (#1053741)
  - Resognize btrfs devices from new btrfs output properly (#1052330)


author: Thomas Fitzsimmons <fitzsim@redhat.com> - 1.1.0-2
changelog:
  - Tolerate trailing newlines in alternatives file.
  - Handle Sun plugin alternative.
  - Do not use desktop-file-install.
  - Resolves: rhbz#195649


author: Thomas Fitzsimmons <fitzsim@redhat.com> - 1.1.2-1
changelog:
  - Import system-switch-java 1.1.2.
  - Remove patches.
  - Resolves: rhbz#442399
  - Resolves: rhbz#404331


author: Deepak Bhole <dbhole@redhat.com> - 1.1.5-1
changelog:
  - Resolves: rhbz#663322
  - Sync with F14:
    - Update to 1.1.5 which fixes rhbz 493898 and adds more translations


author: Jiri Vanek <jvanek@redhat.com> - 1.1.5-4
changelog:
  - added jre-java patch to work corectly with java directories and not
    just with  jre  symlinks
    backward compatibility preserved
  - added correct recognition of icedtea-web plugin
  - added disabledUnderline patch
  - added tuiWidth patch
  - Resolves: rhbz#731039
  - Resolves: rhbz#725718


author: Omair Majid <omajid@redhat.com> - 1.1.5-9
changelog:
  - Remove libuser-python dependency
  - Update to work with newer alternatives
   - added new-jdk-paths.patch
   - this patch is disabled, untill more work is done in upstream
  - Resolves: rhbz#1070976


author: Jiri Vanek <jvanek@redhat.com> - 1.1.5-10
changelog:
  - Renamed (to baseurl) url macro to prevent shadowing
  - Added BSD license to list of Licenses
   - (COPYING.icon says it's a 2-clause BSD license)
  - removed buildroot definition and manual removing of it
  - Resolves: rhbz#1070976


author: Jonathan Lebon <jlebon@redhat.com> - 2.4-10
changelog:
  - Apply spec file patches to this one, not the tarred one
  - Add missing autoreconf patch for backport feature (1051649)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.1.2-9
changelog:
  - Add patch to fix CVE-2010-2642, CVE-2011-0433 (afm-fix patch)
  - New version of patch for CVE-2011-0764, also fixes CVE-2011-1552,
    CVE-2011-1553, CVE-2011-1554 (type1-inv-rw-fix patch)
    Resolves: rhbz#772899
  - Add explicit NVR requires to apps subpackage (consumes libt1(x).so)
  - Fix rpmlint warning (mixed-use-of-spaces-and-tabs)


author: Rex Dieter <rdieter@fedoraproject.org> 1.8-1
changelog:
  - taglib-1.8

  -* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.2-2
  -- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.17-37
changelog:
  - Improve message with response directions to reflect new option
    for user names with dot character


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.17-42
changelog:
  - Add systemd support (thanks to Zbigniew Jędrzejewski-Szmek and Jóhann B. Guðmundsson)
    Resolves: #737219


author: Pavel Raiskup <praiskup@redhat.com> - 2:1.26-21
changelog:
  - enable build for arm64 (#926610)
  - silence gcc warnings (lint fixes without risk from upstream) for RPMDiff


author: Pavel Raiskup <praiskup@redhat.com> - 2:1.26-23
changelog:
  - use /usr/bin/ssh as the default remote shell binary (#969015)
  - do not verbose-print xattrs when --no-xattrs option is used
  - do not override the config.{guess,sub} twice, this is already done by the
    redhat-rpm-config package (#951442)


author: Pavel Raiskup <praiskup@redhat.com> - 1.26-25
changelog:
  - the /etc/rmt seems to be the best place where to look for rmt binary (see the
    commit message in Fedora's cpio.git for more info)


author: Andy Grover <agrover@redhat.com> - 2.1.fb31-1
changelog:
  - New upstream version
  - Move service handling to python-rtslib
  - Remove old packaging bits: clean, buildroot, defattr


author: Andy Grover <agrover@redhat.com> - 0.3.1-5
changelog:
  - Update require-password.patch
  - Change target.yaml to not include a commented-out default password


author: Andy Grover <agrover@redhat.com> 0.6.1-1
changelog:
  - Update to latest version, make needed changes
  - Drop patches:
    * require-password.patch
    * use-std-ssl.patch
  - Change requires from python-lvm to lvm2-python-libs


author: Petr Machata <pmachata@redhat.com> - 4.0-4.20120408
changelog:
  - Rebase to 4.0 update 4
  - Refresh Getting_Started.pdf, Reference.pdf, Tutorial.pdf
  - Provide pkg-config files
  - Resolves: #825402


author: Petr Machata <pmachata@redhat.com> - 4.1-2.20130314
changelog:
  - Fix mfence patch.  Since the __TBB_full_memory_fence macro was
    function-call-like, it stole () intended for function invocation.


author: Tom Lane <tgl@redhat.com> 1.8.0-1
changelog:
  - Update to pgtcl 1.8.0.
  - Relabel license as PostgreSQL now that that's separately recognized by OSI.


author: Fridolin Pokorny <fpokorny@redhat.com> 6.18.00-7
changelog:
  - File locking patch modified to reflect HIST_MERGE flag (#879371)
  - Drop tcsh-6.18.00-sigint-while-waiting-for-child.patch, accepted by upstream
  - Add tcsh-6.18.00-history-merge.patch to merge histlist properly (#919452)
  - Add tcsh-6.18.00-history-savehist.patch to store history with length
    $savehist, not only $history.


author: Fridolin Pokorny <fpokorny@redhat.com> 6.18.01-1
changelog:
  - Update to tcsh-6.18.01
  - Removed tcsh-6.18.00-history-savehist.patch, not accepted by upstream
    http://mx.gw.com/pipermail/tcsh-bugs/2013-March/000824.html


author: Jaromír Končický <jkoncick@redhat.com> - 6.18.01-4
changelog:
  - Fix regression in default $status value in case of lists/pipelines
    (Changed 'anyerror' variable to 'tcsh_posix_status' with opposite meaning)
    Resolves: #1025703


author: Jaromír Končický <jkoncick@redhat.com> - 6.18.01-5
changelog:
  - Readded reverse-history-handling-in-loops patch which was created for
    tcsh version 6.17.00 in RHEL 6.4 to fix bug #814069
    Resolves: #1035235


author: Brian Pepple <bpepple@fedoraproject.org> - 0.6.0-1
changelog:
  - Update to 0.6.0
  - Drop python subpackage. gobject-introspection is used now.
  - Drop unnecessary buildroot cleaning in install section.
  - Update BR for farstream02-devel.


author: Brian Pepple <bpepple@fedoraproject.org> - 1:5.14.1-1
changelog:
  - Update to 5.14.1.
  - Drop defattr. No longer needed.
  - Drop ignore gnome keyring patch. Fixed upstream.


author: Debarshi Ray <rishi@fedoraproject.org> - 1:5.14.1-5
changelog:
  - Add %check to run the upstream test suite on each build (Red Hat #1000705)
  - Resort to using chrpath for removing rpaths instead of hacking libtool


author: Adam Tkac <atkac redhat com> 1:0.17-51
changelog:
  - add "-debug6" option to telnetd (#rh674942)
  - telnet wasn't interruptable (^C) when started with specious -b argument (#704604)


author: Dan Kenigsberg <danken@cs.technion.ac.il> - 0.1-12
changelog:
  - Rebuilt against existing David Type1 fonts. Bug #509697
  - Require specific culmus font packages and obsolete tetex-fonts-hebrew-0.1-9. Bug #485639


author: Parag Nemade <pnemade AT redhat DOT com> - 0.1-20
changelog:
  - Resolves:rh#921852 - Four culmus subpackages are not listed in build require
  - Added BR: and R: for the following packages
  - culmus-hadasim-clm-fonts, culmus-simple-clm-fonts
  - culmus-stamashkenaz-clm-fonts, culmus-stamsefarad-clm-fonts


author: Daiki Ueno <dueno@redhat.com> - 0.5.0-2
changelog:
  - fix <test> usage in fontconfig files (Closes: #837538)
  - refresh fontconfig files with the latest upstream version


author: Daiki Ueno <dueno@redhat.com> - 0.5.0-4
changelog:
  - disable X fonts.dir generation
  - remove obsolete -compat subpackage
  - remove %defattr from %files
  - add missing "make" in %build


author: Petr Pisar <ppisar@redhat.com> - 1.7-39
changelog:
  - Fix maximal RSS report (bug #702826)
  - Clean spec file
  - Recompute CPU usage at finer level (bug #527276)


author: Miloslav Trmač <mitr@redhat.com> - 2.11-3
changelog:
  - Drop the cron.daily script, systemd default configuration handles the same
    places.
    Resolves: #906455


author: Sven Lankes <sven@lank.es> 1.5-1
changelog:
  - New upstream release
  - Do the right thing (tm) and revert to $upstream-behaviour: 
     No longer install tmux setgid and no longer use /var/run/tmux 
     for sockets. Use "tmux -S /var/run/tmux/tmux-`id -u`/default attach"
     if you need to access an "old" tmux session
  - tmux can be used as a login shell so add it to /etc/shells


author: Avesh Agarwal <avagarwa@redhat.com> - 0.8.3-8
changelog:
  - Fix build failure in fedora rawhide. It was caused due to 
    removal of CMAKE_INSTALL_LIBDIR macro from /etc/rpm/cmake.macros 
    that was present in previous fedora releases.


author: Avesh Agarwal <avagarwa@redhat.com> - 0.8.3-12
changelog:
  - Fixes for rhbz #985785 to fix crash issue in Filecert manager
    in platidimv.
  - Fixed crashing of attestation imv so while loading due to
    wrong static initialization order in attestation imv.
  - Fixes some coverity scan errors.
  - Fixed comilation when sysconf dir variable is not defined on a
    local system. Added some messaging outputs during compilations.
  - Fixed erroneous data type conversion issues causing wrong outputs
    and with potential for data corruption.
  - Fixes tncutil build issue from upstream commit
  - Fixes typo in assignment in platidimv from upstream commit
  - Fixes Fix typo in variable declaraction in hostscannerimv
    from upstream commit
  - Fixes imcv shared library build issue from upstream commit


author: Avesh Agarwal <avagarwa@redhat.com> - 0.8.3-13
changelog:
  - Implemented support for dlopen
  - Removed libtool support
  - Fixed imv and imc build issues arising from a
    previous upstream patch
  - Fixed a few coverity scan error issues


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 2:2.12.1-12
changelog:
  - Allow unprivileged users to subscribe to indications
    Resolves: #1049313
  - Remove packages which are part of the minimum build environment from BR 
    Resolves: #1049651
  - Fix Pegasus malforms EmbeddedInstances in upcalls
    Resolves: #1038013


author: Stephen Gallagher <sgallagh@redhat.com> - 2:2.12.1-15
changelog:
  - Generate SSL certificates with x509v3 and CA:FALSE
  - Automatically import self-signed certificates into local trust-store
  - Move SSL certificate generation into the systemd service file
  - Resolves: #1041555


author: John Kacur <jkacur@redhat.com> - 0.11-3
changelog:
  - spec: Mark configuration files with %config (998984)
  - spec: Document the real location of the source in a comment (998987)
  - CLI: fix ps_show_thread call with bad args count (1000025)


author: John Kacur <jkacxur@redhat.com> - 0.11.1-4
changelog:
  - tuna: Do polkit auth for GUI BZ:919212,974027 (996885)
  - tuna: Auto Correction for config file errors (1015062)
  - Rebased to 0.11.1 upstream
  Resolves: rhbz#996885
  Resolves: rhbz#1015062


author: John Kacur <jkacur@redhat.com> - 0.11.1-6
changelog:
  - tuna-modified-sysctl-settings-in-example.conf (1031582)
  - CLI-fix-traceback-where-enter-p-policy-without-prio (1035794)
  Resolves: rhbz#1035794


author: David Knox <dknox@redhat.com> - 0:7.0.42-2
changelog:
  - Resolves: rhbz#1056673 Invocation of useradd with shell
  - other than sbin nologin
  - Resolves: rhbz#1056677 preun systemv scriptlet unconditionally
  - stops service
  - Resolves: rhbz#1056696 init.d tomcat does not conform to RHEL7
  - systemd rules. systemv subpackage is removed.
  - Resolves: CVE-2013-4286
  - Resolves: CVE-2013-4322
  - Resolves: CVE-2014-0050
  - Built for rhel-7 RC


author: David Knox <dknox@redhat.com> - 0:7.0.42-3
changelog:
  - Related: CVE-2013-4286. increment build number. missed doing
  - it. 
  - Resolves: rhbz#1038183 remove BR for ant-nodeps. it's
  - no long used.


author: Matthew Harmsen <mharmsen@redhat.com> - 6.0.0-1
changelog:
  - Bugzilla Bug #702716 - rhcs80 cannot do client auth with pkiconsole
    (ok with 7.3) (jmagne)
  - Require "jss >= 4.2.6-17" as a build and runtime requirement
  - Bump version 2.1.1 --> 6.0.0 (to better coincide with tomcat6)


author: Matthew Harmsen <mharmsen@redhat.com> 6.0.2-1
changelog:
  - Bugzilla Bug #734590 - Refactor JNI libraries for Fedora 16+ . . . (mharmsen)
  - Bugzilla Bug #699809 - Convert CS to use systemd (alee)


author: Matthew Harmsen <mharmsen@redhat.com> 7.0.0-3
changelog:
  - PKI TRAC Ticket #283 - Dogtag 10: Integrate Tomcat 6 'tomcatjss.jar' and
    Tomcat 7 'tomcat7jss.jar' in Fedora 18 tomcatjss package


author: John D. Ramsdell <ramsdell@mitre.org> - 1.0-6
changelog:
  - Changed URL to SourceForge development site.
  - Changed source to NEU site.
  - Quoted % references in macros within changelog.
  - README: Note tpm-tools only needed to take ownership of a TPM.


author: John Kacur <jkacur@redhat.com> - 2.2.1-2
changelog:
  - Various fixes for problems discovered by rpmlint
  - Update the address of FSF in various files
  - Install documentation and non-script python files at mode 644


author: Kamil Dudka <kdudka@redhat.com> - 1:3.2.5d-11
changelog:
  - install man pages using the correct file name suffix
  - provide the fig2ps2tex.sh man page as a symlink


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3.0-2
changelog:
  - fixed race condition in the start/stop code
    resolves: rhbz#1028119
  - improved tuned responsiveness
    resolves: rhbz#1028122


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3.0-7
changelog:
  - throughput-performance is default for the server
    resolves: rhbz#1063481
  - THP not disabled in the latency-performance profile
    resolves: rhbz#1064510
  - added network-latency profile
    resolves: rhbz#1052418
  - added network-throughput profile
    resolves: rhbz#1052421


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.3.0-10
changelog:
  - added requirement to kernel-tools
    resolves: rhbz#1073008
  - made cpupower.service conflicting
    resolves: rhbz#1073392


author: Petr Machata <pmachata@redhat.com> - 2013b-1
changelog:
  - Upstream 2013b
    - Paraguay will end DST on March 24 this year
    - Haiti uses US daylight-saving rules this year
    - Morocco does not observe DST during Ramadan
  - Upstream 2013a
    - Retire Chile patch, 2013a has the data
    - New Zones Asia/Khandyga, Asia/Ust-Nera, Europe/Busingen
    - Many changes in historical timestamps


author: Petr Machata <pmachata@redhat.com> - 2013c-1
changelog:
  - Upstream 2013c
    - Sync past stamps for Palestine and West Bank with timeanddate.com
    - Assume that the recent change to Paraguay's DST rules is permanent
    - Macquarie was uninhabited between 1919 and 1948.  It's also part
      of Australia (update in zone.tab).


author: Patsy Franklin <pfrankli@redhat.com> 2013h-1
changelog:
  - Rebase to 2013h
    - Libya switched to using UTC+2 without DST
    - Western Sahara (Africa/ElAaiun) uses Morocco's DST rules
    - Acres and Amazon swithc to UTC-4 and UTC-5 on 2013-11-10
    - Add entries for DST transition in Morocco in the year 2038


author: Patsy Franklin <pfrankli@redhat.com> 2013i-1
changelog:
  - Rebase with early release of 2013i from Paul Eggert github.
    - Jordan switches back to standard time at 00:00 on December 20,2013.
    - The 2006-2011 transition schedule is planned to resume in 2014.
    - The compile-time flag NOSOLAR has been removed.
    - The files solar87, solar88, and solar89 are no longer distributed.
    - tz-link.htm now mentions Noda Time.


author: Patsy Franklin <pfrankli@redhat.com> - 2014b-1
changelog:
  - Rebase to 2014b
    - Crimea switches to Moscow time on 2014-03-30 at 02:00 local time.
    - New entry for Troll station, Antarctica.


author: Tomas Bzatek <tbzatek@redhat.com> - 2.1.2-2.el7
changelog:
  - Fix crash when loop-deleting non-loop device (#1036076)
  - Fix some thread safety issues (#1036099)
  - Fix lingering mount after CD-ROM drive is ejected (#835120)
  - Fix some uninitializes variables (#1056580)


author: Paul Wouters <pwouters@redhat.com> - 1.4.20-12
changelog:
  - Enable round-robin (with noths() patch)
  - Change cron and systemd service to use root.key, not root.anchor


author: Tomas Hozza <thozza@redhat.com> - 1.4.20-14
changelog:
  - remove missing unbound-rootkey.service from post/preun/postun sections
  - don't hardcode hardening flags, let hardened build macro handles it


author: Kamil Dudka <kdudka@redhat.com> - 2.01-3
changelog:
  - provide a man page for units_cur as a symlink to units.1
  - mention the --check-verbose option in units.1 man page


author: Tom Lane <tgl@redhat.com> 2.3.1-1
changelog:
  - Update to version 2.3.1.  The main externally-visible change is that the
    GUI programs are not part of the unixODBC tarball anymore, so they are no
    longer in this package, and the unixODBC-kde sub-RPM has disappeared.
    There is a separate package unixODBC-gui-qt that now provides those programs.


author: David Tardon <dtardon@redhat.com> - 0.4-6
changelog:
  * Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.4-5
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild


author: Fedora Release Engineering <rel-eng@lists.fedoraproject.org>
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild

  - Fix minor manpage spelling mistake
    Resolves: #675454


author: Tom Callaway <spot@fedoraproject.org> - 6.0-9
changelog:
  - Apply changes to match.c to sync with recmatch from util.c (from zip 3.0)
    This also resolves the license issue in that file.


author: Richard Hughes <rhughes@redhat.com> - 0.9.19-1
changelog:
  - New upstream release
  - Add a Documentation tag to the service file
  - Add support for Logitech Unifying devices
  - Do not continue to poll if /proc/timer_stats is not readable
  - Fix device matching for recent kernels
  - Resolves: #848521


author: Richard Hughes <rhughes@redhat.com> - 0.9.20-1
changelog:
  - New upstream release
  - Factor out the Logitech Unifying support to support other devices
  - Fix batteries which report current energy but full charge
  - Fix several small memory leaks


author: Richard Hughes <rhughes@redhat.com> - 0.9.20-7
changelog:
  - Mark the devel-docs subpackage as noarch to silence a rpmdiff false positive.
  - Resolves: #1070661


author: Rakesh Pandit <rakesh@fedoraproject.org> 0.7.5-1
changelog:
  - Upgrade to 0.7.5:
  -  Improved docs
  -  Test suite
  - 0.7.4
  -  Cleaned up code and fixed memory leaks
  - 0.7.3
  -  Builds for Cygwin, minor bug fix
  -  Changes in build system.
  -  Added: Qt Assistant documentation output
  - 0.7.2
  -  Improved and cleaned API


author: Thomas Haller <thaller@redhat.com> 1.2.7-3
changelog:
  - Add manual page for usb_modeswitch_dispatcher and fix errors in
    manual page of usb_modeswitch (rhbz#948451, rhbz#884203).


author: Hans de Goede <hdegoede@redhat.com> - 0.6-3
changelog:
  - Fix usbredirserver not listening for ipv6 connections (rhbz#957470)
  - Fix a few (harmless) coverity warnings


author: Hans de Goede <hdegoede@redhat.com> - 0.6-5
changelog:
  - Use the new libusb autodetach kernel driver functionality
  - Fix a usbredirparser bug which causes tcp/ip redir to not work (rhbz#1005015)


author: Miloslav Trmač <mitr@redhat.com> - 1.110-1
changelog:
  - Update to usermode-1.110.
    Note that this drops halt/poweroff/reboot helpers, the respective
    implementations in systemd now include PolicyKit support.  Spec file change
    based on a patch by Lennart Poettering <lpoetter@redhat.com>.
    Resolves: #804088, #849208


author: Karel Zak <kzak@redhat.com> 2.23.2-7
changelog:
  - fix #1024366 - losetup does not use loop-control to add device
  - fix #1016471 - document that blockdev --setbsz call has never worked


author: Karel Zak <kzak@redhat.com> 2.23.2-9
changelog:
  - fix #1039189 - taskset man page PERMISSIONS section is incorrect
  - fix #1050852 - lscpu: support discontinuous NUMA nodes


author: Karel Zak <kzak@redhat.com> 2.23.2-11
changelog:
  - fix #1046849 - filesystem type is not correctly displayed by df command
  - fix #1055490 - libblkid: Do not problem for backup btrfs superblock
  - fix #1054186 - wipefs does not clean gpt header fully, PMBR remains


author: Karel Zak <kzak@redhat.com> 2.23.2-15
changelog:
  - fix #1078618 - flock nfs file fails on nfsv4
  - fix #1047376 - blkid hangs while reading from /dev/fd0
  - fix #1079931 - fsck: warning on kdump boot


author: Michal Hlavinka <mhlavink@redhat.com> - 1.6.2-20
changelog:
  - drop last man page change, that option is just for compatibility
  - fix NAME section of man pages to be whatis friendly


author: Michal Hlavinka <mhlavink@redhat.com> - 1.6.2-23
changelog:
  - drop uuid-pgsql subpackage, it is outdated and does not work, use 
    uuid-ossp module from postgresql-contrib instead


author: Hans de Goede <hdegoede@redhat.com> - 0.8.8-1
changelog:
  - New upstream release 0.8.8
  - Add patches from upstream git to improve Pixart JPEG decoding
  - Add patch from upstream git to fix building with latest kernels (rhbz#823863)


author: Hans de Goede <hdegoede@redhat.com> - 0.9.5-2
changelog:
  - Add a few libv4l2rds patches from upstream, which bring libv4l2rds to its
    final API / ABI, so that apps build against it won't need a rebuild in the
    future


author: Mark Wielaard <mjw@redhat.com> - 3.9.0-1
changelog:
  - Upgrade to valgrind 3.9.0 final.
  - Remove support for really ancient GCCs (valgrind-3.9.0-config_h.patch).
  - Add valgrind-3.9.0-amd64_gen_insn_test.patch.
  - Remove and cleanup fake 32-bit libgcc package.


author: Mark Wielaard <mjw@redhat.com> - 3.9.0-1.2
changelog:
  - Remove unnecessary and unapplied valgrind-3.8.1-movntdqa.patch
  - Remove valgrind-3.9.0-s390x-workarounds.patch
  - Add valgrind-3.9.0-s390-risbg.patch (#1018325)


author: Mark Wielaard <mjw@redhat.com>
changelog:
  - Add valgrind-3.9.0-manpage-memcheck-options.patch. (#1040914)
  - Add valgrind-3.9.0-s390-fpr-pair.patch. (#1036615)


author: <sshedmak@redhat.com> - 1.1.2-1
changelog:
  - Fixed FSType, Preferred Styles, UniqueID and Fullname
  - Fixed Invalid Glyph Names reported by fontlint
  - with exceptions string added in License


author: Karsten Hopp <karsten@redhat.com> 7.4.5-1
changelog:
  - patchlevel 5
  - when closing a window fails ":bwipe" may hang
  - "vaB" while 'virtualedit' is set selects the wrong area


author: Karsten Hopp <karsten@redhat.com> 7.4.009-1
changelog:
  - patchlevel 009
    mkdir("foo/bar/", "p") gives an error message
    creating a preview window on startup messes up the screen
    new regexp engine can't be interrupted
    too easy to write a file was not decrypted (yet)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.10.0-12
changelog:
  - update translations (bz #1030385)
  - Rename hide_unsupported_rhel_options to stable_defaults and clean-up its usage (bz #908616)
  - osdict: Mark RHEL 7 as supported (bz #1053074)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.10.0-13
changelog:
  - include proper patch for "Rename hide_unsupported_rhel_options to stable_defaults and clean-up its usage" (bz #908616)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.10.0-14
changelog:
  - inhibit --prompt for cli tools (bz #1060571)
  - Don't use SCSI or USB disks with stable_defaults (bz #1058808)


author: Giuseppe Scrivano <gscrivan@redhat.com> - 0.10.0-19
changelog:
  - Not propose to install from CD/DVD in RHEL7 (bz #1072610)
  - Disable add filesystem passthrough for RHEL7 qemu (bz #1077172)


author: Richard W.M. Jones <rjones@redhat.com> - 1.0.8-2
changelog:
  - New upstream version 1.0.8.
  - Requires tiny change to ocaml-libvirt, hence dep bump.
  - Clean up the spec file.
  - Remove explicit BR ocaml-camomile (not used AFAIK).


author: Richard W.M. Jones <rjones@redhat.com> - 1.0.8-6
changelog:
  - Include processcsv.py script and man page, but on RHEL only
    (RHBZ#665817, RHBZ#912020)
  - Clear executable stack flag on PPC, PPC64 (RHBZ#605124).


author: Christophe Fergeau <cfergeau@redhat.com> 0.5.7-6
changelog:
  - Fix fullscreen+multiscreen bug
    Resolves: rhbz#920988

  - Fix addition of hotkey combos to "Send Keys" menu
    Resolves: rhbz#922716

  - Translation updates from RH translation team
    Resolves: rhbz#1047327

  - Add kiosk mode
    Resolves: rhbz#1040926

  - Add .vv file description to man page
    Resolves: rhbz#970825

  - spice: show an error dialog if password is invalid
    Resolves: rhbz#990883


author: Richard W.M. Jones <rjones@redhat.com> - 1.13-2
changelog:
  - Include two upstream patches for detecting Xen and Linux VServer better
    (RHBZ#973663).
  - Modernize the spec file.


author: Richard W.M. Jones <rjones@redhat.com> - 1.13-3
changelog:
  - Suppress warning message on Amazon EC2:
    "grep: /proc/xen/capabilities: No such file or directory"


author: Radek Novacek <rnovacek@redhat.com> 0.8-9
changelog:
  - Add satellite support
  - Handle more than 100 objects in esx traversal
  - Use instanceUuid when uuid of virtual machine is empty
  - Resolves: rhbz#1032596


author: Radek Novacek <rnovacek@redhat.com> 0.8-10
changelog:
  - Force using background mode when starting from systemd
  - Check if process defined by PID file exists
  - vsphere: reconnect before each scan
  - Resolves: rhbz#1036561, rhbz#1035604, rhbz#1035957


author: Radek Novacek <rnovacek@redhat.com> 0.8-12
changelog:
  - Support sending additional information together with guest uuid on libvirt
  - Reconnect to vsphere before each scan
  - Requires python-rhsm >= 1.10.10
  - Resolves: rhbz#1048954, rhbz#1047245


author: Akira TAGOH <tagoh@redhat.com> - 20121230-2
changelog:
  - Drop -common package and keep consistent state of the directory
    by using the macro. (#893789)
  - Drop old Obsoletes and Provides line.


author: Karel Zak <kzak@redhat.com> - 3.0-13
changelog:
  - fix #428582 - linux.words contains misspelled word "flourescent"
  - fix #440146 - misspelled word in /usr/share/dict/words (architecure)


author: Karel Zak <kzak@redhat.com> - 3.0-14
changelog:
  - fix #457309 - contains both 'unnecessary' and 'unneccesary'
  - fix #470921 -"Barack" and "Obama" are not in /usr/share/dict/words
  - update spec file (#226542 - Merge Review)


author: Jiri Skala <jskala@redhat.com> - 3.0.1-1
changelog:
  - update to latest upstream 3.0.1
  - fixes #851441 - Introduce new systemd-rpm macros in vsftpd spec file
  - fixes #845980 - vsftpd seccomp filter is too strict


author: Richard W.M. Jones <rjones@redhat.com> - 5.13-2
changelog:
  - Enable /etc/watchdog.d directory for storing test binaries
    (RHBZ#657750, RHBZ#831190).
  - Missing BR systemd-units.
  - Update .gitignore.
  - Drop Group line, not required by modern RPM.


author: Ales Ledvinka <aledvink@redhat.com> - 5.13-9
changelog:
  - SELinux: Add /usr/libexec/watchdog/scripts/ for test-bin and repair-bin to inherit from.
  - systemd: service with network available dependency
  - systemd: correct cgroup for realtime settings
  - Document SELinux and systemd.


author: Peter Lemenkov <lemenkov@gmail.com> 4.60.1-1
changelog:
  - Version 4.60.1 (bugfix release)
  - Added man-pages
  - The only patch was rebased
  - Small cosmetic spec-file cleanups


author: Kalev Lember <kalevlember@gmail.com> - 2.0.2-2
changelog:
  - Remove glib-compile-schemas scriptlets: the schemas are no longer installed
  - Add ldconfig calls to the libwebkit2gtk subpackage
  - Remove rpath from MiniBrowser
  - Re-enable full debuginfo (#861452)


author: Tomas Popela <tpopela@redhat.com> - 2.0.4-6
changelog:
  - Enable higher compression for output rpms
  - Resolves: rhbz#1039590
  - Avoid video player to set system volume to 100%
  - Resolves: rhbz#1029783


author: Tomas Hozza <thozza@redhat.com> 1.14-3
changelog:
  - Added libuuid-devel to BuildRequires to use libuuid functions
    in "src/warc.c" functions (#865421)


author: Tomas Hozza <thozza@redhat.com> - 1.14-5
changelog:
  - Added BuildRequires: perl-podlators for pod2man
  - Patched manpage to silent new Tex errors
  - Resolves: (#914571)


author: Tomas Hozza <thozza@redhat.com> - 1.14-6
changelog:
  - add missing options accept-regex and reject-regex to man page
  - fix errors in texi2pod introduced in Perl-5.18


author: Tomas Hozza <thozza@redhat.com> - 1.14-8
changelog:
  - Fix deadcode and possible use of NULL in vprintf (#913153)
  - Add documentation for --regex-type and --preserve-permissions
  - Fix --preserve-permissions to work as documented (and expected)
  - Fix bug when authenticating using user:password@url syntax (#912358)
  - Document and fix --backups option


author: Peter Hatina <phatina@redhat.com> 1.10.3-1
changelog:
  - upgrade to 1.10.3
  - see http://www.wireshark.org/docs/relnotes/wireshark-1.10.3.html
  - Resolves: #1026649
              CVE-2013-6336
              CVE-2013-6337
              CVE-2013-6338
              CVE-2013-6339
              CVE-2013-6340


author: Peter Hatina <phatina@redhat.com> - 1.10.3-8
changelog:
  - remove last data source due to HTTP dissector, which was
    spewing too much output
  - Related: #1011339


author: Peter Hatina <phatina@redhat.com> - 1.10.3-9
changelog:
  - security patches
  - Resolves: CVE-2014-2281
              CVE-2014-2282
              CVE-2014-2283
              CVE-2014-2299


author: Petr Pisar <ppisar@redhat.com> - 3.0-18
changelog:
  - wnb requires a font to start
  - Move Tk browser to sub-package wordnet-browser
  - Move alternative manual pages to wordnet-doc package
  - Do not package INSTALL instructions and correct URL
  - Modernize spec file


author: Peng Wu <pwu@redhat.com> - 0.2.0-0.3.beta
changelog:
  - get rid of binding="same", fixes [rhbz#578050] (New: lang-specific overrides rule doesn't work as expected).


author: Peng Wu <pwu@redhat.com> - 0.2.0-0.4.beta
changelog:
  - Improves Simplified Chinese and Traditional Chinese fonts.
    In order to keep the WenQuanYi Zen Hei as default Simplified Chinese font,
    the fontconfig file of this WenQuanYi Micro Hei font is removed.


author: Gerard Ryan <galileo@fedoraproject.org> - 0:1.6.2-5
changelog:
  - Fix file encoding for wsdl4j-MANIFEST.MF
  - Update Bundle-Version in OSGi manifest
  - Fix installation of jars in specfile
  - Clean up specfile - remove javadoc dir version; remove clean section


author: Roland Grunberg <rgrunber@redhat.com> 0:0.5.2-1
changelog:
  - Update to 0.5.2.
  - Remove xmldb-api due to deprecation.
  - Fix ws-jaxme-ant-scripts.patch to apply cleanly.


author: Ondrej Vasik <ovasik@redhat.com> - 1.61-2
changelog:
  - Merge review cleanup (#226546), comment patches, license
    to LGPLv2+, specify names in files section...


author: Parag Nemade <paragn AT fedoraproject DOT org> - 3.3.12ga11-5
changelog:
  - Remove vendor tag from desktop file as per https://fedorahosted.org/fesco/ticket/1077
  - Cleanup spec as per recently changed packaging guidelines


author: Samantha N. Bueno <sbueno[at]redhat.com> - 3.3.12ga12-1
changelog:
  - updated to 3.3.12ga12
  - fixes CVE-2012-5662 (#889373, #924228)
  - add support for aarch64 to build system (#926737)


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:2.7.1-15
changelog:
  - Add NOTICE.txt file to subpackages
  - Remove bundled sources of other packages used to build javadocs


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:2.7.1-17
changelog:
  - Remove classpaths from manifests, resolves: rhbz#575635
  - Remove jlex from classpath
  - Fix source URL to archive.apache.org
  - Don't mix spaces and tabs in spec file
  - Fix end-of-line encoding of some documentation files


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.3.8-2
changelog:
  - Specfile cleanups as suggested in the review.
  - Remove unneeded BR on pkgconfig.
  - Remove unneeded chrpath call.


author: Debarshi Ray <rishi@fedoraproject.org> - 1:2.8.8-19
changelog:
  - Use XDG_CONFIG_HOME instead of home for config files
    (http://sourceforge.net/p/xchat/bugs/1506/)
  - Use name and generic name correctly in desktop file
    (http://sourceforge.net/p/xchat/bugs/1397/)


author: Pavel Raiskup <praiskup@redhat.com> - 3.0.7-2
changelog:
  - really remove the gcc-warning patch & remove old Makefile from git
  - s/Url/URL/, for both fixes thanks to pshiffer


author: Kalev Lember <kalevlember@gmail.com> - 0.9-1
changelog:
  - Update to 0.9
  - Adjust BuildRequires to build with gtk3
  - Drop lxde patch, merged upstream
  - Validate the desktop file


author: Rex Dieter <rdieter@fedoraproject.org> 1.1.0-0.10.20110714git
changelog:
  - fix gnome-screensaver detection bogosity (#702540,#736159)
  - xdg-open: x-www-browser: command not found (#755553)
  - drop htmlview hackage


author: Kalev Lember <kalev@smartlink.ee> - 3.1.1-1
changelog:
  - Update to 3.1.1
  - Dropped CVE-2009-1885 patch.
  - Use dos2unix -k instead of unrecognized option -U
  - Removed the multilib conflict workaround as Xerces_autoconf_config.hpp
    no longer contains the conflicting XERCES_SIZEOF_LONG define.


author: Eric Sandeen <sandeen@redhat.com> 3.1.3-2
changelog:
  - Preserve xattrs on multi-part stream restores (#1034014)
  - Prevent segfault on multi-part stream restores (#1034015)


author: Eric Sandeen <sandeen@redhat.com> 3.1.3-5
changelog:
  - Preserve file capabilities during xfsrestore (#1013345)

  - Preserve xattrs on multi-part stream restores (#1034014)


author: Eric Sandeen <sandeen@redhat.com> 3.2.0-0.1.alpha1
changelog:
  - New upstream alpha release with preliminary CRC support (#1015632)
  - Additional patches beyon 3.2.0-alpha1:
  - Fix big endian build
  - Handle symlinks in xfs_quota arguments (#1013668)
  - Don't report non-regular files as xfsctl-capable (#1012412)
  - Fix log recovery on 4k filesystems


author: Eric Sandeen <sandeen@redhat.com> 3.2.0-0.2.alpha1
changelog:
  - Move xfs_types.h from xfsprogs-qa-devel to xfsprogs-devel (#1024048)
  - Remove deprecated xfs_check from package (#1029458)


author: Eric Sandeen <sandeen@redhat.com> 3.2.0-0.3.alpha2
changelog:
  - New upstream alpha release (#1034445)
  - Remove xfs_check reference from fsck.xfs output (#1029455)
  - Fix xfs_fsr on some files with selinux attributes (#1034013)


author: Eric Sandeen <sandeen@redhat.com> 3.2.0-0.6.alpha2
changelog:
  - xfs_metadump: Require -F if proper SB magic is not found (#1040921)
  - xfs_repair: fix bad block pointer found in large directories (#1034157)
  - libxfs: Don't mark single-map blockmaps as discontiguous (#1033480)
  - libxfs: Clear stale buffer errors on write (1033480)


author: Eric Sandeen <sandeen@redhat.com> 3.2.0-0.7.alpha2
changelog:
  - xfs_metadump: Really add xfs_metadump -F option (#1040921)
  - xfs_check: Remove xfs_check manpage, xfs_check is deprecated (#1029458)


author: Eric Sandeen <sandeen@redhat.com> 3.2.0-0.8.alpha2
changelog:
  - mkfs.xfs fix default log size for small filesystems (#1034003)
  - xfs_copy: partial fixups for CRC filesystems (#1043570)
  - xfs_logprint: Don't error out after split items lose context (#1043591)


author: Ville Skyttä <ville.skytta at iki.fi> - 1.0-20020801.1
changelog:
  - Major spec file rewrite (#226559), most visible changes:
  - Various XML cataloguing improvements.
  - Register to SGML catalogs in addition to XML.
  - Install to %{_datadir}/xml per the FHS.
  - Sync with Fedora packaging guidelines.
  - Silence post-install scriptlet.


author: Ismael Olea <ismael@olea.org> 20051222-1
changelog:
  - updating to last version of sample-xsl-xhtml2fo.zip
  - fixing spec for contributing to Fedora and rpmlinting with 0.82


author: Peter Hutterer <peter.hutterer@redhat.com> - 2.7-3
changelog:
  - Rebuild with fixed xkbcomp, re-create the right directory listing (not
    that anyone actually uses it)


author: Alexander Kurtakov <akurtako@redhat.com> 1:3.1.3-5
changelog:
  - Remove javax.xml.bind from osgi imports - it's part of the JVM now.
  - Drop the ws-jaxme dependency for the same reason.


author: Mat Booth <fedora@matbooth.co.uk> - 1.0-0.5.b3_xalan2.svn313293
changelog:
  - Link to local java API docs properly and fix requires on javadoc package.
  - Build with source and target levels of 1.5 so we don't have to require 1.6.


author: Ondrej Vasik <ovasik@redhat.com> - 0.0.24-1
changelog:
  - new release 0.0.24, basic support for docbook->epub
    conversion, use backend extensions by default
    (--noextensions) to disable it


author: Jason L Tibbitts III <tibbs@math.uh.edu> - 1.5-1
changelog:
  - Address review commentary https://bugzilla.redhat.com/show_bug.cgi?id=226569
  - Update to 1.5, solving license issue.  This adds a few new files and requires
    a pkgconfig dependency.
  - Add dependency on xml-common to fix unowned directory issue. 
  - Remove some bits (buildroot tag and cleaning) no longer required in Fedora.


author: Peter Hutterer <peter.hutterer@redhat.com> 7.7-3
changelog:
  - luit 1.1.1
  - oclock 1.0.3
  - xclock 1.0.6
  - xbiff 1.0.3
  - xpr 1.0.4
  - xcursorgen 1.0.5
  - xclipboard 1.1.2
  - xfontsel 1.0.4
  - xfd 1.1.1
  - xlogo 1.0.4
  - xvidtune 1.0.3


author: Peter Hutterer <peter.hutterer@redhat.com> 7.2-11
changelog:
  - Require xorg-x11-font-utils >= 7.2-11 for font-utils 1.1.0
  - Fix bashism in spec file (&>)
  - Remove perl hack for DEFAULT_FONTS_DIR, fixed upstream 
  - Remove perl and autoconf requirement.
  - Create %ghost files {misc|705dpi|...}/fonts.scale.
  - Drop fontdir alias patches
  - Update a few fonts (well, all of them)
      - encodings-1.0.3
      - font-adobe-100dpi-1.0.1
      - font-adobe-75dpi-1.0.1
      - font-adobe-utopia-100dpi-1.0.2
      - font-adobe-utopia-75dpi-1.0.2
      - font-adobe-utopia-type1-1.0.2
      - font-alias-1.0.2
      - font-arabic-misc-1.0.1
      - font-bh-100dpi-1.0.1
      - font-bh-75dpi-1.0.1
      - font-bh-lucidatypewriter-100dpi-1.0.1
      - font-bh-lucidatypewriter-75dpi-1.0.1
      - font-bitstream-100dpi-1.0.1
      - font-bitstream-75dpi-1.0.1
      - font-bitstream-type1-1.0.1
      - font-cronyx-cyrillic-1.0.1
      - font-cursor-misc-1.0.1
      - font-daewoo-misc-1.0.1
      - font-dec-misc-1.0.1
      - font-isas-misc-1.0.1
      - font-jis-misc-1.0.1
      - font-micro-misc-1.0.1
      - font-misc-cyrillic-1.0.1
      - font-misc-ethiopic-1.0.1
      - font-misc-misc-1.1.0
      - font-mutt-misc-1.0.1
      - font-schumacher-misc-1.1.0
      - font-screen-cyrillic-1.0.2
      - font-sony-misc-1.0.1
      - font-sun-misc-1.0.1
      - font-winitzki-cyrillic-1.0.1
      - font-xfree86-type1-1.0.2


author: Peter Hutterer <peter.hutterer@redhat.com> 1:7.5-10
changelog:
  - Add the epoch to the Provides bdftruncate. bdftruncate had an epoch for
    years, make sure that stays alive


author: Peter Hutterer <peter.hutterer@redhat.com> 1:7.5-14
changelog:
  - mkfontscale 1.1.0
  - mkfontdir 1.0.7
  - bdftopcf 1.0.4
  - Document mkfontscale's -u/-U in the man page (#948841)


author: Jerome Glisse <jglisse@redhat.com> 0.5.0-2.20130401git81aadb8
changelog:
  - Silence rpmlint warning about ldconfig
  - Only install libglamor.so in devel package.
  - Adding COPYING and README as doc


author: Jerome Glisse <jglisse@redhat.com> 0.5.0-3.20130401git81aadb8
changelog:
  - Remove comment rather than investigating Xorg mess as running ldconfig can't be harmfull.
  - Fix devel package dependency.


author: Peter Hutterer <peter.hutterer@redhat.com> 7.6-24
changelog:
  - bigregsproto 1.1.2
  - compositeproto 0.4.2
  - damageproto 1.2.1
  - fontsproto 2.1.2
  - inputproto 2.2
  - kbproto 1.0.6
  - recordproto 1.14.2
  - scrnsaverproto 1.2.2
  - xcmiscproto 1.2.2
  - xextproto 7.2.1


author: Adam Jackson <ajax@redhat.com> 7.7-1
changelog:
  - rgb 1.0.5
  - xsessreg 1.0.8
  - xgamma 1.0.5
  - xhost 1.0.5
  - xmodmap 1.0.7
  - xsetroot 1.1.1
  - xstdcmap 1.0.3


author: Peter Hutterer <peter.hutterer@redhat.com> 7.5-12
changelog:
  - Update sources for latest tarballs, some changes got lost before the commit
  - require gettext-devel for AM_ICONV (now required by xwininfo)


author: Kevin Fenzi <kevin@scrye.com> 1.3.2-7
changelog:
  - Add patch to not switch tty's, so systemd-logind works right with startx. 
  - Partially Fixes bug #806491


author: Peter Hutterer <peter.hutterer@redhat.com> 7.7-4
changelog:
  - xkbcomp: Fix generation of XKB directory listing, missing reset on file
    handler caused parse errors and incomplete directory listings


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:1.1.3.8-4
changelog:
  - Fix pom filenames (Resolves rhbz#655829)
  - Changes according to new guidelines (versionless jars)
  - Fix few packaging problems (post/postun deps)


author: Nils Philippsen <nils@redhat.com> - 0.998-21
changelog:
  - don't dereference NULL preview objects when quitting (#963696)
  - fix vendor tag logic in a prettier way


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.12.3-1
changelog:
  - update to 0.12.3
  - drop upstreamed immodule patch
  - rewrite Net/ThemeName handling: set it based on .gtkrc-2.0-kde4 (kcm-gtk)


author: Pavel Raiskup <praiskup@redhat.com> - 5.1.2-5alpha
changelog:
  - fix manual page inconsistencies with help output (private #948533)
  - enable/fix the 'xzgrep -h' (private #850898)


author: Mikolaj Izdebski <mizdebsk@redhat.com> 1.0-2
changelog:
  - Fix issues found during package review
  - Include missing COPYING files.
  - Add missing RPM group.
  - Comment on touching package-list.


author: Daniel P. Berrange <berrange@redhat.com> - 2.0.4-1
changelog:
  - Update to 2.0.4 release (rhbz #845777)
  - Fix License tag to reflect change in 2.0.0 series from BSD to ISC


author: Kalev Lember <kalevlember@gmail.com> - 1:3.8.1-3
changelog:
  - Make yelp-libs dep arch-specific, thanks to Michael Schwendt (#967180)
  - Don't create empty /usr/share/gnome/help directory: this should be owned by
    individual packages that install files in there (#964421)
  - Use configure --disable-static instead of removing the static .a afterwards


author: Honza Horak <hhorak@redhat.com> - 3:1.37.1-5
changelog:
  - Remove SysV init conversion and systemd macros compatible code
  - Require systemd instead systemd-units
  - Remove systemd-sysv


author: Honza Horak <hhorak@redhat.com> - 2.31-4
changelog:
  - Remove systemd-units and systemd-sysv requirements
  - Clean-up SysV init conversion code
  - Clean-up systemd preset macros compatibility code
  - Remove fedora-releated stuff for maps upgrading


author: Honza Horak <hhorak@redhat.com> - 2.12-9
changelog:
  - Do not check old passwords using passwd.adjunct feature
  - Patch from Paul Wouters to handle crypt() returning NULL
    Resolves: #814803


author: Valentina Mukhamedzhanova <vmukhame@redhat.com> - 3.4.3-110
changelog:
  - yum-cron: fail when sigCheckPkg() returns 2
  - Resolves: bug#1052994
  - depsolve_loop_limit=<forever> should try forever


author: James Antill <james.antill@redhat.com> - 3.4.3-111
changelog:
  - A few simple perf, UI, bug, and docs. fixes.
  - Resolves: rhbz#1053289
  - A few group related bug fixes from pre-f20 testing.
  - Resolves: rhbz#1052436


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.4.3-112
changelog:
  - Improve yum-cron messages and error handling.
  - Resolves: rhbz#1040619
  - Enable yum_cron_systemd
  - Resolves: rhbz#1040620
  - Update "yum check" description.
  - Resolves: rhbz#1015000


author: James Antill <james.antill@redhat.com> - 3.4.3-116
changelog:
  - Fix traceback on removing doc dirs.
  - Resolves: rhbz#1062959
  - Tweak docs for groups info, showing yum remove results.
  - Resolves: rhbz#833087


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-15
changelog:
  - Update to latest HEAD
  - debuginfo-install: handle YumBaseError
  - fs-snapshot: "dmsetup -o" workaround.  BZ 954358, BZ 949569
  - tmprepo: avoid spaces in repoid. BZ 965806
  - repoquery: add cachedir locking. BZ 969776
  - Fix a bug in Modified/Upgraded/Downgraded output. BZ 819502


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-16
changelog:
  - Update to latest HEAD
  - Fix pacakge => package typos
  - docs: Add missing man page short descriptions
  - docs: Escape dashes in command-line options
  - docs: Add missing man pages for all yum-utils
  - Add --show-duplicates to repoquery manpage. BZ 975565
  - yum-complete-transaction: unlock yum.pid. BZ 984119
  - sanitize repoquery --repofrompath. BZ 988140
  - yum changelog: implicit since=all. BZ 961782
  - repoquery: retry doLock() BZ 988223
  - repoquery: add --installroot option. BZ 988429


author: James Antill <james.antill@redhat.com> - 1.1.31-18
changelog:
  - Disable puppetverify plugin for el7. BZ 1002876.
  - reposync: fix a copy-paste error. BZ 994514
  - repo-rss: non-ASCII fix, sorting.
  - Add --nogroups and --noplugins options to verifytree.


author: Kalev Lember <kalevlember@gmail.com> - 3.4.0-1
changelog:
  - Update to 3.4.0
  - Don't run autoreconf and intltoolize in the spec file; the tarball should be
    good enough


author: Karel Klic <kklic@redhat.com> - 3.0-1
changelog:
  - New upstream version
  - Removed zip23.patch, because ZMEM is not used anyway
  - Removed zip-2.31-install.patch, problem solved in upstream
  - Removed zip23-umask.patch, upstream uses mkstemp which solves the problem
  - Removed zip-2.31-near-4GB.patch, because upstream version
    handles large files well
  - Removed zip-2.31-configure.patch, configure is better in the current version
  - Removed zip-2.3-sf.patch, the error message doesn't exist in upstream anymore
  - Removed zip-2.31-umask_mode.patch, which fixes also removed near-4GB patch
  - Updated zip-2.31-time.patch for zip 3.0
  - Updated exec-shield.patch for zip 3.0
  - Updated zip-2.3-currdir.patch for zip 3.0


author: Peter Schiffer <pschiffe@redhat.com> - 1.2.7-7
changelog:
  - resolves: #844791
    rank Z_BLOCK flush below Z_PARTIAL_FLUSH only when last flush was Z_BLOCK
  - done some minor .spec file cleanup


author: Peter Schiffer <pschiffe@redhat.com> - 1.2.7-8
changelog:
  - related: #832545
    reverted changes for this bug, static libraries shouldn't be compiled with
    -fPIC flag


author: James Antill <james@fedoraproject.org> - 5.0.2-7
changelog:
  - Remove unneeded build require on tetex.
  - Resolves: rhbz#1037828
  - Depend on hostname package instead of /bin/hostname.


author: Richard W.M. Jones <rjones@redhat.com> - 0.6.1.1-1
changelog:
  - New upstream version 0.6.1.1.
  - Remove mlvirsh subpackage, no longer upstream.
  - Replace custom configure with RPM macro configure.
  - Use RPM global instead of define.
  - Use built-in RPM OCaml dependency generator.


author: Richard W.M. Jones <rjones@redhat.com> - 0.6.1.2-5
changelog:
  - Modernise the spec file.
  - Add upstream patch to remove unnecessary get_cpu_stats second parameter
    (thanks Hu Tao).


author: Panu Matilainen <pmatilai@redhat.com> - 9.1.0-55
changelog:
  - Add dependency generator for kABI provides (#1004930)
  - Explicitly require rpm >= 4.9.0 for the above


author: Panu Matilainen <pmatilai@redhat.com> - 9.1.0-56
changelog:
  - Drop accidentally added second -m32 switch from i686 build flags
  - Use -mcpu=power7 for ppc and ppc64 builds (#789116)


author: Ray Strode <rstrode@redhat.com> 0.8.9-0.3.20140113
changelog:
  - Read OS string from REDHAT_BUGZILLA_PRODUCT instead of PRETTY_NAME
    in /etc/os-release to work around a lorax bug.
    Resolves: #911553
  - Fix text splash when explicitly configured by user
    Related: #911553
    Related: #1026571


author: Ray Strode <rstrode@redhat.com> 0.8.9-0.9.20140113
changelog:
  - Ignore early fb devices
    Resolves: #1063758
    Resolves: #1064235
    Resolves: #1066641
  - Ignore udev if using lone serial console
    Resolves: #1058049
  - Fix password at start up race
    Resolves: #1070707
    Resolves: #1073145


author: Joe Orton <jorton@redhat.com> - 2.4.6-13
changelog:
  - mod_ssl: sanity-check use of "SSLCompression" (#1036666)
  - mod_proxy_http: fix brigade memory usage (#1040447)


author: Jan Kaluza <jkaluza@redhat.com> - 2.4.6-17
changelog:
  - mod_dav: add security fix for CVE-2013-6438 (#1077907)
  - mod_log_config: add security fix for CVE-2014-0098 (#1077907)


author: Martin Stransky <stransky@redhat.com> - 24.4.0-3
changelog:
  - Added a workaround for Bug 1054242 - RHEVM: Extremely high memory
    usage in Firefox 24 ESR on RHEL 6.5


author: Ray Strode <rstrode@redhat.com> 3.8.4-26
changelog:
  - Adjust path setting logic one more time to preserve
    /sbin and /bin ordering
    Related: #1080153
    Resolves: 1091053


author: Zeeshan Ali <zeenix@redhat.com> - 3.8.2-8
changelog:
  - Remove patch 'daemon: Exit gnome-keyring-daemon when the DBus connection
    closes' (related: rhbz#1030671).


author: Dan Williams <dcbw@redhat.com> - 1:0.9.9.1-13.git20140326
changelog:
  - core: ignore IPv6 cache routes to fix initial connection generation (rh #1083153)
  - core: ensure slow DHCP emits 'dhcp4-change' and 'dhcp6-change' dispatcher events (rh #1091296)


author: Rui Matos <rmatos@redhat.com> - 3.8.0-5
changelog:
  - Fix for "seahorse-nautilus broken by glib2 regression related to
    SIGCHLD warnings"
  - Resolves: #1093123


author: Petr Machata <pmachata@redhat.com> - 2.2.2-28
changelog:
  - GCC optimizes out write to internalUse in call from
    allocateMoreSlots to malloc.  Rename malloc to __efence__malloc to
    pacify the trigger.  Later sneak the malloc symbol in with an alias.
  - Resolves: #631316


author: Petr Machata <pmachata@redhat.com> - 2.2.2-29
changelog:
  - Tell GCC not to recognize builtins when compiling efence.c.
  - Resolves: #631316
  - Related: #632312


author: Patsy Franklin <pfrankli@redhat.com> - 2014d-1
changelog:
  - Rebase to 2014d
    - zic no longer generates files containing time stamps before
      the Big Bang.  This works around GNOME bug 730332


author: Patsy Franklin <pfrankli@redhat.com> - 2014e-1
changelog:
  - Rebase to 2014e
    - Morrocco suspends DTS for Ramadan 
         June 28 at 03:00 and August 2 at 02:00
    - Egypt suspends DTS for Ramadan
         June 26 and July 31 at 24:00


author: Jiri Vanek <jvanek@redhat.com> - 1:1.6.0.1-6.1.13.3
changelog:
  - updated to icedtea 1.13.3
  - updated to openjdk-6-src-b31-15_apr_2014
  - renmoved upstreamed patch7, 1.13_fixes.patch
  - renmoved upstreamed patch9, 1051245.patch
  - Resolves: rhbz#1099563


author: Jiri Vanek <jvanek@redhat.com> - 1.7.0.55-2.4.7.0.el7
changelog:
  - bumped to future icedtea-forest 2.4.7
  - updatever set to 55, buildver se to 13, release reset to 0
  - removed upstreamed patch402 gstackbounds.patch
  - removed Requires: rhino, BuildRequires is enough
  - ppc64 repalced by power64 macro
  - patch111 applied as dry-run (6.6 forward port)
  - nss enabled, but notused as default (6.6 forward port)
  - Resolves: rhbz#1099565


author: Andrew John Hughes <gnu.andrew@redhat.com> - 1.7.0.55-2.4.7.2
changelog:
  - Remove NSS patches. Issues with PKCS11 provider mean it shouldn't be enabled.
  - Always setup nss.cfg and depend on nss-devel at build-time to do so.
  - This allows users who wish to use PKCS11+NSS to just add it to java.security.
  - Patches to PKCS11 provider will be included upstream in 2.4.8 (ETA July 2014)
  - Resolves: rhbz#1099565


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.1
changelog:
  - kvm-iscsi-fix-indentation.patch [bz#1090978]
  - kvm-iscsi-correctly-propagate-errors-in-iscsi_open.patch [bz#1090978]
  - kvm-block-iscsi-query-for-supported-VPD-pages.patch [bz#1090978]
  - kvm-block-iscsi-fix-segfault-if-writesame-fails.patch [bz#1090978]
  - kvm-iscsi-recognize-invalid-field-ASCQ-from-WRITE-SAME-c.patch [bz#1090978]
  - kvm-iscsi-ignore-flushes-on-scsi-generic-devices.patch [bz#1090978]
  - kvm-iscsi-always-query-max-WRITE-SAME-length.patch [bz#1090978]
  - kvm-iscsi-Don-t-set-error-if-already-set-in-iscsi_do_inq.patch [bz#1090978]
  - kvm-iscsi-Remember-to-set-ret-for-iscsi_open-in-error-ca.patch [bz#1090978]
  - kvm-qemu_loadvm_state-shadow-SeaBIOS-for-VM-incoming-fro.patch [1091322]
  - kvm-uhci-UNfix-irq-routing-for-RHEL-6-machtypes-RHEL-onl.patch [bz#1090981]
  - kvm-ide-Correct-improper-smart-self-test-counter-reset-i.patch [bz#1093612]
  - Resolves: bz#1091322
    (fail to reboot guest after migration from RHEL6.5 host to RHEL7.0 host)
  - Resolves: bz#1090981
    (Guest hits call trace migrate from RHEL6.5 to RHEL7.0 host with -M 6.1 & balloon & uhci device)
  - Resolves: bz#1090978
    (qemu-kvm: iSCSI: Failure. SENSE KEY:ILLEGAL_REQUEST(5) ASCQ:INVALID_FIELD_IN_CDB(0x2400))
  - Resolves: bz#1093612
    (CVE-2014-2894 qemu-kvm: QEMU: out of bounds buffer accesses, guest triggerable via IDE SMART [rhel-7.0.z])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.2
changelog:
  - kvm-pc-add-hot_add_cpu-callback-to-all-machine-types.patch [bz#1094820]
  - Resolves: bz#1094820
    (Hot plug CPU not working with RHEL6  machine types running on RHEL7 host.)


author: David Knox <dknox@redhat.com> - 0:7.0.42-5
changelog:
  - Related: CVE-2013-4286
  - Related: CVE-2013-4322
  - Related: CVE-2014-0050
  - revisit patches for above.


author: Tom Lane <tgl@redhat.com> 1.2.3-1
changelog:
  - Update to final release of 1.2.3
  Resolves: #660484
  - Rebuild was needed anyway for mysql ABI break (no more libmysqlclient_r)


author: Milan Crha <mcrha@redhat.com> - 3.8.5-21.1
changelog:
  - Add patch for RH bug #1097268 (Auto-mark as seen sometimes doesn't work)
  - Add patch for RH bug #1097269 (Fix various memory leaks)
  - Add patch for RH bug #1097270 (Filtered message not opened in a separate window)
  - Add patch for RH bug #1097271 (Labels GSettings busy loop)


author: Milan Crha <mcrha@redhat.com> - 3.8.5-23.1
changelog:
  - Add patch for RH bug #1097249 (IMAPx: Improve responsiveness)
  - Add patch for RH bug #1097250 (IMAPx: Avoid 'Empty cache file' error)
  - Add patch for RH bug #1097251 (IMAPx: Avoid 'Source stream returned no data' error)
  - Add patch for RH bug #1097252 (IMAPx: Refetching summary information for all msgs)
  - Add patch for RH bug #1097253 (Fix various memory leaks)


author: Ray Strode <rstrode@redhat.com> 3.8.4-27.1
changelog:
  - Fix resource leak when reauthentication client is rejected
    Resolves: #1086189

  - Don't reject reauthentication clients with uids that don't
    match the uid of those clients' logind sessions.
    Related: #1086189 1057179


author: Kalev Lember <kalevlember@gmail.com> - 0.7.990-3.git20130515
changelog:
  - Install the libmm-glib.so symlink in -glib-devel
  - Include the /usr/share/libmm-glib directory in -glib-devel
  - Make sure -glib-devel subpackage depends on the base -glib package


author: Jakub Filak <jfilak@redhat.com> 2.1.6-1
changelog:
  - replace functions deprecated in Gtk-3.10 with their substitutes
  - integrate with satyr, drop btparser
  - use absolute path in python shebang rhzb#987010
  - abrt-action-save-package-data: properly close rpm database. Closes #674.
  - abrt-action-save-package-data: fix handling of ProcessUnpackaged on scripts
  - abrt-action-save-package-data manpage: typo fix
  - change /var/spool/abrt/ to /var/tmp/abrt in doc rhbz#912750
  - Fix RPMdiff warnings about abrtd and abrt-action-install-debuginfo-to-abrt-cache
  - specfile: add dependency on abrt-libs to abrt-addon-uefioops
  - stop using the hardcoded event list, use workflows instead rhbz#866027
  - retrace-client: build correct release for Fedora Rawhide
  - spec: drop unnecessary Obsoletes and Provides
  - correct FSF address in python exception hook
  - add missing manual pages for binaries and scripts
  - fix rpmlint issues in the spec file
  - move event option XML files to /usr/share/libreport/
  - abrt-hook-ccpp: always fall back to creating user core.
  - dbus: add GetForeignProblems method
  - the system tray icon opens recently detected problem
  - add gdb python plugin which analyzes coredump for vulnerability
  - applet: stop saving configuration at exit
  - introduce system-config-abrt
  - abrt-cli status: make the output more natural
  - Fix wrong path in shell include
  - abrt-dump-xorg: save "type=xorg" along with "analyzer=xorg"
  - Update python hook to use fixed socket interface
  - abrt-server: updates/fixes for future rasdaemon needs
  - Resolves: #988165


author: Jakub Filak <jfilak@redhat.com> 2.1.7-1
changelog:
  - fix debuginfo installer expecting user input from a pipe - closes #696
  - add environment variable whitelist to debuginfo install wrapper - closes #692
  - add repo_pattern argument as a custom repository filter - closes #688
  - abrt-cli list: replace "@" prefix by "id " prefix
  - fix a crash in 'abrt-cli info' when short id isn't found
  - Use common string-to-sha1_hash functions. #694
  - doc: update OpenGPGCheck in a-a-save-package-data rhbz#997922
  - abrt-cli report: accept sha1 hashes of directory names. #693
  - abrt-dump-oops: emit a message if throttling for a significant period of time
  - abrt-gdb-exploitable: print current instruction
  - spec: posttrans scriptlet regenerating core_backtraces
  - abrt-handle-event: add check for missing crash thread
  - provide tmpfiles.d configuration
  - abrt-cli list: use sha1 hash as short ids instead of @N thing. rhbz#906733
  - vmcore: fail gracefully if dump_dir is not accessible
  - spec: vmcore: require kexec-tools
  - vmcore: use re.MULTILINE instead of numerical value
  - vmcore: don't fail if /etc/kdump.conf is not readable
  - abrt-cli info: add "-s SIZE" option. closes #689
  - fix noninteractive mode in debuginfo installer - rhbz#737066
  - fixed the gpg keys loading - closes #686
  - Fix type of OPT_BOOL's referenced flag variable - it must be int, not bool!
  - adds a kdump.conf parser to get the correct dump dir location, closes #640
  - xorg_event.conf: use abrt-action-list-dsos to create dso_list
  - abrt-action-list-dsos: extend it to be able to parse Xorg backtrace.
  - don't require debuginfo for vmcore analysis rhbz#768389
  - specfile: make addon-pstoreoops obsolete addon-uefioops
  - abrt-dump-oops: add -t option which slows down problem creation. rhbz#902398.
  - rename uefioops to pstoreoops rhbz#949721
  - spec: create type element for problem dirs where it doesn't exist - rhbz#958968
  - introduce abrt-upload-watch
  - fix ccpp hook to create the type element - closes #682
  - specfile: use systemd-rpm macros. rhbz#850019
  - abrt-harvest-vmcore: notify new path - #657
  - abrt-dump-oops: remove redundant g_list_length() call, make messages clearer
  - updated translation - rhbz#860555
  - updated transifex url
  - GUI config: add Close/Defaults button
  - GUI config: hide option descriptions in tool tips
  - GUI config: add Silent shortened reporting support
  - applet: silent shortened reporting
  - applet: less misleading label for Ignore button
  - abrt-handle-upload: switch from shell to python; send socket notification. #657
  - spec: add build requires for XSMP depencies
  - applet: update seen list when X Session dies
  - improved the error messages in abrt-server - closes #679
  - fix typo in abrt-config-widget.ui
  - spec: add new packages abrt-gui-libs and abrt-gui-devel
  - delete desktop file for system-config-abrt
  - expose abrt configuration GUI in public API
  - rewrite abrt-harvest-uefioops to python - closes #678
  - spec: abrt-python is no longer noarch - related #677
  - created python binding for notify_new_path - closes #677
  - spec: install applet's desktop file to system dir
  - applet: configure notification source
  - rewrite shell script for moving vmcores into python closes #676
  - abrtd: ensure that the dump location directory exists
  - a-a-ureport: generate core_backtrace only for CCpp problems
  - do not store potentially big data in /tmp
  - abrt-dbus: send new problem notify signal to socket
  - abrtd: remove "post-create" machinery. Related to #657
  - Avoid leaving stale rpmdb locks behind (rhbz#918184)
  - abrtd: improve parsing of pidfile in create_pidfile()
  - abrt-dump-{oops,xorg}: send new problem notify signal to socket
  - abrtd: disable inotify watch on DUMP_LOC
  - abrt-hook-ccpp: send "POST /creation_notification" after creating problem dir
  - Stop dying in check_free_space(); rename it to low_free_space()
  - abrt-server: make create_problem_dir() run "post-create"
  - abrt-handle-event: create DUMP_LOC/post-create.lock when running "post-create"
  - abrt-server: add support for "POST /creation_notification"
  - abrt-handle-event: free more of allocated data
  - Resolves: #880694, #895745, #906733, #949721, #953927, #960549, #961520, #967644, #990208, #993591, #993592


author: Al Stone <ahs3@redhat.com> - 20130517-1
changelog:
  - Update to latest upstream source.
  - Remove acpica-tools-config.patch -- now in upstream
  - Remove iasl-signed-char.patch -- now in upstream
  - Updated debian-big_endian.patch
  - Updated debian-unaligned.patch


author: Paul Howarth <paul@city-fan.org> - 1.4.8-4
changelog:
  - libGeoIPUpdate and geoipupdate (which is linked against it) are GPL-licensed
    rather than LGPL-licensed (#840896)
  - Don't package generic INSTALL file (#661625)
  - Kill bogus rpaths on x86_64
  - Hardcode library sonames in %files list to avoid nasty surprises in the
    future
  - Drop %defattr, redundant since rpm 4.4
  - Recode docs as UTF-8
  - Don't use macros for commands
  - Use tabs


author: Dan Winship <danw@redhat.com> - 1:0.9.9.1-14.git20140326
changelog:
  - core: fix connection matching with IPv6 routes (rh #1086237)
  - core: wait with startup-complete for dynamic IPv4 and IPv6 addresses (rh #1096063, rh #1086906)


author: Jiří Klimeš <jklimes@redhat.com> - 1:0.9.9.1-17.git20140326
changelog:
  - core: fix connection matching generally and for s390 as well (rh #1083196)
  - dhcp: fix DHCPv6 address lifetime handling (rh #1086237)


author: David Vossel <dvossel@redhat.com> - 1.1.10-28
changelog:
  - pengine: fixes invalid transition caused by clones with more than 10 instances
      Resolves: rhbz#1078504


author: Andrew Beekhof <abeekhof@redhat.com> 1.1.10-30
changelog:
  - crmd: Do not erase the status section for unfenced nodes
  - crmd: Correctly react to successful unfencing operations
  - crmd: Report unsuccessful unfencing operations
  - crmd: Do not overwrite existing node state when fencing completes
  - fencing: Correctly record which peer performed the fencing operation
  - fencing: Automatically switch from 'list' to 'status' to 'static-list' if those actions are not advertised in the metadata
  - fencing: Filter self-fencing at the peers to allow unfencing to work correctly
  - pengine: Automatically re-unfence a node if the fencing device definition changes
  - pengine: Fencing devices default to only requiring quorum in order to start
  - pengine: Delay unfencing until after we know the state of all resources that require unfencing
  - pengine: Ensure unfencing occurs before fencing devices are (re-)probed
  - pengine: Ensure unfencing only happens once, even if the transition is interrupted
  - pengine: Do not unfence nodes that are offline, unclean or shutting down
  - pengine: Unfencing is based on device probes, there is no need to unfence when normal resources are found active
  - logging: daemons always get a log file, unless explicitly set to configured 'none'
  - lrmd: Expose logging variables expected by OCF agents
  - crm_report: Suppress logging errors after the target directory has been compressed
  - crm_resource: Wait for the correct number of replies when cleaning up resources
      Resolves: rhbz#1078078


author: David Vossel <dvossel@redhat.com> - 1.1.10-31
changelog:
  - fencing: Fence using all required devices
  - fencing: Execute all required fencing devices regardless of what topology level they are at
  - fencing: default to 'off' when agent does not advertise 'reboot' in metadata
      Resolves: rhbz#1078078


author: Noriko Hosoi <nhosoi@redhat.com> - 1.3.1.6-1
changelog:
  - bump version to 1.3.1.6
  - Ticket 47455 - valgrind - value mem leaks, uninit mem usage
  - fix coverity 11915 - dead code - introduced with fix for ticket 346
  - fix coverity 11895 - null deref - caused by fix to ticket 47392
  - fix compiler warning in posix winsync code for posix_group_del_memberuid_callback
  - Fix compiler warnings for Ticket 47395 and 47397
  - fix compiler warning (cherry picked from commit 904416f4631d842a105851b4a9931ae17822a107)
  - Ticket 47450 - Fix compiler formatting warning errors for 32/64 bit arch
  - fix compiler warnings
  - Fix compiler warning (cherry picked from commit ec6ebc0b0f085a82041d993ab2450a3922ef5502)


author: Noriko Hosoi <nhosoi@redhat.com> - 1.3.1.6-2
changelog:
  - bump version to 1.3.1.6-2
  - Resolves Bug 1000633 - ns-slapd crash due to bogus DN
  - Ticket #47488 - Users from AD sub OU does not sync to IPA


author: Rich Megginson <rmeggins@redhat.com> - 1.3.1.6-3
changelog:
  - Ticket #47455 - valgrind - value mem leaks, uninit mem usage
  - Ticket 47500 - start-dirsrv/restart-dirsrv/stop-disrv do not register with systemd correctly


author: Noriko Hosoi <nhosoi@redhat.com> - 1.3.1.6-4
changelog:
  - bump version to 1.3.1.6-4
  - Resolves Bug 1007988 - Under specific values of nsDS5ReplicaName, replication may get broken or updates missing (Ticket 47489)
  - Resolves Bug 853931 - Allow macro aci keywords to be case-insensitive (Ticket 449)
  - Resolves Bug 1006563 - automember rebuild task not working as expected (Ticket 47507)


author: Rich Megginson <rmeggins@redhat.com> - 1.3.1.6-5
changelog:
  - Resolves: bug 1013896 - logconv.pl - Use of comma-less variable list is deprecated
  - Resolves: bug 1008256 - backend txn plugin fixup tasks should be done in a txn
  - Resolves: bug 1013738 - CLEANALLRUV doesnt run across all replicas
  - Resolves: bug 1011220 - PassSync removes User must change password flag on the Windows side
  - Resolves: bug 1008610 - tmpfiles.d references /var/lock when they should reference /run/lock
  - Resolves: bug 1012125 - Set up replcation/agreement before initializing the sub suffix, the sub suffix is not found by ldapsearch
  - Resolves: bug 1013063 - RUV tombstone search with scope "one" doesn`t work
  - Resolves: bug 1013893 - Indexed search are logged with 'notes=U' in the access logs
  - Resolves: bug 1013894 - improve logconv.pl performance with large access logs
  - Resolves: bug 1013898 - Fix various issues with logconv.pl
  - Resolves: bug 1013897 - logconv.pl uses /var/tmp for BDB temp files
  - Resolves: bug 1013900 - logconv: some stats do not work across server restarts
  - Resolves: bug 1014354 - Coverity fixes - 12023, 12024, and 12025


author: Rich Megginson <rmeggins@redhat.com> - 1.3.1.6-6
changelog:
  - Resolves: bug 1013900 - logconv: some stats do not work across server restarts
  -  previous patch introduced regressions
  -  fixed by c2eced0 ticket #47550 and e2a880b Ticket #47550 and 8b10f83 Ticket #47551
  - Resolves: bug 1008610 - tmpfiles.d references /var/lock when they should reference /run/lock
  -  previous patch not complete, fixed by a11be5c Ticket 47513
  - Resolves: bug 1016749 - DS crashes when "cn=Directory Manager" is changing it's password
  -  cherry picked upstream f786600 Ticket 47329 and b67e230 Coverity Fixes
  - Resolves: bug 1015252 locale "nl" not supported by collation plugin
  - Resolves: bug 1016317 Need to update supported locales
  - Resolves: bug 1016722 memory leak in range searches


author: Rich Megginson <rmeggins@redhat.com> - 1.3.1.6-7
changelog:
  - Resolves: bug 1018893 DS91: ns-slapd stuck in DS_Sleep
  - Resolves: bug 1018914 fixup memberof task does not work: task entry not added


author: Noriko Hosoi <nhosoi@redhat.com> - 1.3.1.6-8
changelog:
  - release 1.3.1.6-8
  - Resolves: bug 971111 - DNA plugin failed to fetch replication agreement 
  - Resolves: bug 1026931 - 1.2.11.29 crash when removing entries from cache


author: Noriko Hosoi <nhosoi@redhat.com> - 1.3.1.6-9
changelog:
  - release 1.3.1.6-9
  - Resolves: bug 1028440 - Winsync replica initialization and incremental updates from DS to AD fails on RHEL
  - Resolves: bug 1027502 - Replication Failures related to skipped entries due to cleaned rids
  - Resolves: bug 1027047 - Winsync plugin segfault during incremental backoff


author: Rich Megginson <rmeggins@redhat.com> - 1.3.1.6-10
changelog:
  - release 1.3.1.6-10
  - Resolves: bug 1018893 DS91: ns-slapd stuck in DS_Sleep
  -     had to revert earlier change - does not work and breaks ipa


author: David Knox <dknox@redhat.com> - 0:7.0.42-6
changelog:
  - Resolves: CVE-2014-0099 Fix possible overflow when parsing
  - long values from byte array
  - Resolves: CVE-2014-0096 Information discloser process XSLT
  - files not subject to same constraint running under
  - java security manager
  - Resolves: CVE-2014-0075 Avoid overflow in ChunkedInputFilter.


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-153.el7_0.1
changelog:
  - Allow mongod to create sock files
  Resolves:#1092405
  - Add additional fixes related to docker and upgrade issues


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-153.el7_0.6
changelog:
  - Back port openstack fixes
  - svirt sandbox domains to read gear content in /run
  - Allow gear_t to manage openshift files


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-153.el7_0.7
changelog:
  - Add more fixes for OpenStack
  - Add fixes for geard
  - Make openwsman as unconfined_domain in RHEL7.0


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-153.el7_0.8
changelog:
  - Allow rsync to create  swift_server.lock with swift.log labeling
  - Add labeling for swift lock files
  - Make neutron_t as unconfined domain


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-153.el7_0.9
changelog:
  - Allow neutron to bind xserver port
  - Allow neutron to execute kmod in insmod_t
  - Allow neutron to execute udevadm in udev_t
  - Allow keepalived to execute bin_t/shell_exec_t
  - Allow neutron to create sock files
  - Label swift-proxy-server as swift_exec_t


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-153.el7_0.10
changelog:
  - Allow swift to execute bin_t
  - Allow swift to bind http_cache
  - Label /var/log/horizon as an apache log


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-66
changelog:
  - Resolves: rhbz#1097323 - segfault in sssd_be when second domain tree
                             users are queried while joined to child domain


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-67
changelog:
  - Fix a DEBUG message, backport two related fixes
  - Related: rhbz#1097323 - segfault in sssd_be when second domain tree
                             users are queried while joined to child domain


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-68.1
changelog:
  - Resolves: rhbz#1098608 - Expanding home directory fails when the request
                             comes from the PAC responder


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-68.2
changelog:
  - Backport a patch to allow krb5-utils-test to run as root
  - Related: rhbz#1098608 - Expanding home directory fails when the request
                            comes from the PAC responder


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-68.3
changelog:
  - Squash in upstream review comments about the PAC patch
  - Related: rhbz#1098608 - Expanding home directory fails when the request
                            comes from the PAC responder


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-68.4
changelog:
  - Rebuild for a proper dist tag
  - Related: rhbz#1098608 - Expanding home directory fails when the request
                            comes from the PAC responder


author: Jakub Hrozek <jhrozek@redhat.com> - 1.11.2-68.5
changelog:
  - Rebuild for a proper dist tag, yet again, now using the correct build
    options
  - Related: rhbz#1098608 - Expanding home directory fails when the request
                            comes from the PAC responder


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-6
changelog:
  - Completely disable Xen.  APIs seem to have changed incompatibly.
  - Add commits from upstream since 0.5.
  - Remove pagerate.pl when building on RHEL.
  - Modernize the spec file.


author: Richard W.M. Jones <rjones@redhat.com> - 0.5-11
changelog:
  - Output of 'rpm -qi' has changed, so the VirtualizationVendor metric
    was not working.
    resolves: rhbz#1085848


author: David Knox <dknox@redhat.com> - 0:7.0.42-7
changelog:
  - Related: CVE-2014-0099 incrementing release so rpmdiff doesn't complain about
  - no new entries in the changelog


author: Honza Horak <hhorak@redhat.com> - 1:5.5.37-1
changelog:
  - Rebase to 5.5.37
    https://kb.askmonty.org/en/mariadb-5537-changelog/
    Also fixes: CVE-2014-2440 CVE-2014-0384 CVE-2014-2432 CVE-2014-2431
    CVE-2014-2430 CVE-2014-2436 CVE-2014-2438 CVE-2014-2419
    Resolves: #1101062


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-34.3
changelog:
  - fix CVE-2010-5298 - possible use of memory after free
  - fix CVE-2014-0195 - buffer overflow via invalid DTLS fragment
  - fix CVE-2014-0198 - possible NULL pointer dereference
  - fix CVE-2014-0221 - DoS from invalid DTLS handshake packet
  - fix CVE-2014-0224 - SSL/TLS MITM vulnerability
  - fix CVE-2014-3470 - client-side DoS when using anonymous ECDH


author: Tomas Mraz <tmraz@redhat.com> - 2:4.1.5.1-14
changelog:
  - label the newly created home dir correctly (#1077809)
  - mention that chage -d 0 forces password change (#1135010)
  - improve date parsing and error detecting in chage
  - avoid full group database scanning in newgrp in most common case
  - report error if usermod asked for moving homedir and it does not exist


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-16.git20131011
changelog:
  - core: fix IPv4 addressing when IPv6 is disabled at boot time (rh #1012151)
  - ifcfg-rh: fix handling of default routes in route6 files (rh #991807)
  - core: fix PropertiesChanged signals for IP-related properties
  - ifcfg-rh: make minimal ifcfg file handling consistent with initscripts


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-19.git20131108
changelog:
  - core: fix various issues with ignore-carrier configuration (rh #1018403)
  - core: improve handling of NPAR/SRIOV devices in bonds (rh #804527)
  - ifcfg-rh: fix crash when reading connection (rh #1025007)
  - core: better handling of unrecognized connections (rh #1022256)
  - cli: add 'nmcli dev connect eth0' functionality (rh #961543)
  - core: add support for DCB/FCoE configuration (rh #799241)
  - cli: add 'activate' menu command for interactive editor (rh #1004883)
  - core: fix segfault when setting default IPv6 route for VPNs (rh #1019021)
  - core: track autoconnect for software devices that are removed (rh #1005913)
  - ifcfg-rh: always read and write static IP addresses (rh #998135)
  - cli: copy remove connection to local one on save (rh #997958)
  - core: don't crash when no DHCP client is available (rh #1015809)
  - libnm-glib: fix crash in nm_client_new() (rh #1010288)


author: Steve Grubb <sgrubb@redhat.com> - 0.14-3
changelog:
  - Fix bz 590561 aide does not detect the change of SElinux context
  - Fix bz 590566 aide reports a changed file when it has not been changed


author: Rex Dieter <rdieter@fedoraproject.org> 1.6.1-8
changelog:
  - CVE-2009-1720 OpenEXR: Multiple integer overflows (#513995)
  - CVE-2009-1721 OpenEXR: Invalid pointer free by image decompression (#514003)


author: Stef Walter <stefw@redhat.com> - 0.7-1
changelog:
  - Work around broken krb5 with empty passwords [#960001]
  - Fix memory corruption issue [#959999]
  - Update to 0.7, fixing various bugs


author: Richard Hughes <rhughes@redhat.com> - 0.8.8-1
changelog:
  - New upstream release
  - PackageKit now allow local active users to install signed software without
    prompting for authentication. If you need to change this you will need to
    either install a PolicyKit override or just patch the policy file.
  - Added Provides property to retrieve which Provides the backend supports
  - Allow clients to call org.freedesktop.DBus.Peer
  - browser-plugin: Do not crash when running an installed package that is upgradable
  - Do not install the bash-completion code in /etc
  - Do not use _UTF8Writer when using python3
  - Don't abort the daemon if the client requests a property that does not exist
  - Don't use the default main context in sync PkClient methods
  - Expose the transaction flags on the .Transaction object
  - Pause for 10 seconds if an error occurred before restarting systemd-updates
  - Remove the prepared-updates file if any relevant state was changed
  - Support getting the distro-id from /etc/os-release
  - Use PIE to better secure installed tools and also use full RELRO in the daemon
  - Use the correct session method to fix font installation in pk-gtk-module
  - Write a pre-failure status file in case the update transaction crashes
  - yum: Ensure conf.cache is set before repo.cache is created
  - yum: Ignore errors when removing packages to work out the requires list
  - zif: Do not issue a critical warning when doing WhatProvides
  - zif: Use the same speedup used in libzif upstream


author: Richard Hughes <rhughes@redhat.com> - 0.8.9-1
changelog:
  - New upstream release
  - Add 'pkcon backend-details' to be get details of the selected backend
  - Do not rely on Python2 to write UTF-8 strings
  - Update the comps->group mapping for Fedora 19
  - When converting to unicode special case YumBaseError


author: Tom Lane <tgl@redhat.com> 3.8.1-1
changelog:
  - Created package by stripping down postgresql specfile and adjusting
    to meet current packaging guidelines for python modules.


author: Tom Lane <tgl@redhat.com> 3.8.1-2
changelog:
  - Fix License tag and permissions on example scripts under tutorial/,
    per discussion in package review request.
  Related: #452321


author: Rex Dieter <rdieter@fedoraproject.org> 4.10.1-2
changelog:
  - filter private shared objects
  - %{python_sitelib}/dbus/mainloop/qt.so should be in %python_sitearch (#957260)
  - .spec cleanup
  - -assistant subpkg


author: - Guenther Deschner <gdeschner@redhat.com> - 4.1.1-35
changelog:
  - resolves: #1105504 - CVE-2014-0244: DoS in nmbd.
  - resolves: #1108844 - CVE-2014-3493: DoS in smbd with unicode path names.
  - resolves: #1105573 - CVE-2014-0178: Uninitialized memory exposure.


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.3
changelog:
  - kvm-virtio-net-fix-buffer-overflow-on-invalid-state-load.patch [bz#1095677]
  - kvm-virtio-net-out-of-bounds-buffer-write-on-load.patch [bz#1095684]
  - kvm-virtio-net-out-of-bounds-buffer-write-on-invalid-sta.patch [bz#1095689]
  - kvm-virtio-out-of-bounds-buffer-write-on-invalid-state-l.patch [bz#1095694]
  - kvm-virtio-avoid-buffer-overrun-on-incoming-migration.patch [bz#1095737]
  - kvm-virtio-scsi-fix-buffer-overrun-on-invalid-state-load.patch [bz#1095741]
  - kvm-virtio-validate-config_len-on-load.patch [bz#1095782]
  - kvm-virtio-validate-num_sg-when-mapping.patch [bz#1095765]
  - kvm-virtio-allow-mapping-up-to-max-queue-size.patch [bz#1095765]
  - kvm-vmstate-add-VMS_MUST_EXIST.patch [bz#1095706]
  - kvm-vmstate-add-VMSTATE_VALIDATE.patch [bz#1095706]
  - kvm-hpet-fix-buffer-overrun-on-invalid-state-load.patch [bz#1095706]
  - kvm-hw-pci-pcie_aer.c-fix-buffer-overruns-on-invalid-sta.patch [bz#1095714]
  - kvm-usb-sanity-check-setup_index-setup_len-in-post_load.patch [bz#1095746]
  - kvm-usb-sanity-check-setup_index-setup_len-in-post_l2.patch [bz#1095746]
  - kvm-usb-fix-up-post-load-checks.patch [bz#1096828]
  - kvm-XBZRLE-Fix-qemu-crash-when-resize-the-xbzrle-cache.patch [bz#1110191]
  - kvm-Provide-init-function-for-ram-migration.patch [bz#1110191]
  - kvm-Init-the-XBZRLE.lock-in-ram_mig_init.patch [bz#1110191]
  - kvm-XBZRLE-Fix-one-XBZRLE-corruption-issues.patch [bz#1110191]
  - kvm-Count-used-RAMBlock-pages-for-migration_dirty_pages.patch [bz#1110189]
  - kvm-qcow-correctly-propagate-errors.patch [bz#1097229]
  - kvm-qcow1-Make-padding-in-the-header-explicit.patch [bz#1097229]
  - kvm-qcow1-Check-maximum-cluster-size.patch [bz#1097229]
  - kvm-qcow1-Validate-L2-table-size-CVE-2014-0222.patch [bz#1097229]
  - kvm-qcow1-Validate-image-size-CVE-2014-0223.patch [bz#1097236]
  - kvm-qcow1-Stricter-backing-file-length-check.patch [bz#1097236]
  - kvm-char-restore-read-callback-on-a-reattached-hotplug-c.patch [bz#1110219]
  - kvm-qcow2-Free-preallocated-zero-clusters.patch [bz#1110188]
  - kvm-qemu-iotests-Discard-preallocated-zero-clusters.patch [bz#1110188]
  - Resolves: bz#1095677
    (CVE-2013-4148 qemu-kvm: qemu: virtio-net: buffer overflow on invalid state load [rhel-7.0.z])
  - Resolves: bz#1095684
    (CVE-2013-4149 qemu-kvm: qemu: virtio-net: out-of-bounds buffer write on load [rhel-7.0.z])
  - Resolves: bz#1095689
    (CVE-2013-4150 qemu-kvm: qemu: virtio-net: out-of-bounds buffer write on invalid state load [rhel-7.0.z])
  - Resolves: bz#1095694
    (CVE-2013-4151 qemu-kvm: qemu: virtio: out-of-bounds buffer write on invalid state load [rhel-7.0.z])
  - Resolves: bz#1095706
    (CVE-2013-4527 qemu-kvm: qemu: hpet: buffer overrun on invalid state load [rhel-7.0.z])
  - Resolves: bz#1095714
    (CVE-2013-4529 qemu-kvm: qemu: hw/pci/pcie_aer.c: buffer overrun on invalid state load [rhel-7.0.z])
  - Resolves: bz#1095737
    (CVE-2013-6399 qemu-kvm: qemu: virtio: buffer overrun on incoming migration [rhel-7.0.z])
  - Resolves: bz#1095741
    (CVE-2013-4542 qemu-kvm: qemu: virtio-scsi: buffer overrun on invalid state load [rhel-7.0.z])
  - Resolves: bz#1095746
    (CVE-2013-4541 qemu-kvm: qemu: usb: insufficient sanity checking of setup_index+setup_len in post_load [rhel-7.0.z])
  - Resolves: bz#1095765
    (CVE-2013-4535 CVE-2013-4536 qemu-kvm: qemu: virtio: insufficient validation of num_sg when mapping [rhel-7.0.z])
  - Resolves: bz#1095782
    (CVE-2014-0182 qemu-kvm: qemu: virtio: out-of-bounds buffer write on state load with invalid config_len [rhel-7.0.z])
  - Resolves: bz#1096828
    (CVE-2014-3461 qemu-kvm: Qemu: usb: fix up post load checks [rhel-7.0.z])
  - Resolves: bz#1097229
    (CVE-2014-0222 qemu-kvm: Qemu: qcow1: validate L2 table size to avoid integer overflows [rhel-7.0.z])
  - Resolves: bz#1097236
    (CVE-2014-0223 qemu-kvm: Qemu: qcow1: validate image size to avoid out-of-bounds memory access [rhel-7.0.z])
  - Resolves: bz#1110188
    (qcow2 corruptions (leaked clusters after installing a rhel7 guest using virtio_scsi))
  - Resolves: bz#1110189
    (migration can not finish with 1024k 'remaining ram' left after hotunplug 4 nics)
  - Resolves: bz#1110191
    (Reduce the migrate cache size during migration causes qemu segment fault)
  - Resolves: bz#1110219
    (Guest can't receive any character transmitted from host after hot unplugging virtserialport then hot plugging again)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.4
changelog:
  - kvm-zero-initialize-KVM_SET_GSI_ROUTING-input.patch [bz#1110693]
  - kvm-skip-system-call-when-msi-route-is-unchanged.patch [bz#1110693]
  - Resolves: bz#1110693
    (2x RHEL 5.10 VM running on RHEL 7 KVM have low TCP_STREAM throughput)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.5
changelog:
  - kvm-Allow-mismatched-virtio-config-len.patch [bz#1095782]
  - Resolves: bz#1095782
    (CVE-2014-0182 qemu-kvm: qemu: virtio: out-of-bounds buffer write on state load with invalid config_len [rhel-7.0.z])


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.6
changelog:
  - kvm-vmstate-reduce-code-duplication.patch [bz#1095706]
  - kvm-vfio-pci-Add-debug-config-options-to-disable-MSI-X-K.patch [bz#1110693 bz#1110695]
  - kvm-vfio-correct-debug-macro-typo.patch [bz#1110693 bz#1110695]
  - kvm-vfio-pci-Fix-MSI-X-debug-code.patch [bz#1110693 bz#1110695]
  - kvm-vfio-pci-Fix-MSI-X-masking-performance.patch [bz#1110693 bz#1110695]
  - kvm-vfio-Fix-MSI-X-vector-expansion.patch [bz#1110693 bz#1110695]
  - kvm-vfio-Don-t-cache-MSIMessage.patch [bz#1110693 bz#1110695]
  - kvm-virtio-net-Do-not-filter-VLANs-without-F_CTRL_VLAN.patch [bz#1130149]
  - kvm-virtio-net-add-vlan-receive-state-to-RxFilterInfo.patch [bz#1130149]
  - kvm-memory-Don-t-call-memory_region_update_coalesced_ran.patch [bz#1124660]
  - Resolves: bz#1110693
    (2x RHEL 5.10 VM running on RHEL 7 KVM have low TCP_STREAM throughput)
  - Resolves: bz#1110695
    (2x RHEL 5.10 VM running on RHEL 7 KVM have low TCP_STREAM throughput)
  - Resolves: bz#1124660
    ([FJ7.0 Bug] RHEL7.0 guest attaching 150 or more virtio-blk disks fails to start up)
  - Resolves: bz#1130149
    (rx filter incorrect when guest disables VLAN filtering)


author: Miroslav Rezanina <mrezanin@redhat.com> - 1.5.3-60.el7_0.7
changelog:
  - kvm-mirror-Fix-resource-leak-when-bdrv_getlength-fails.patch [bz#1132806]
  - kvm-blockjob-Add-block_job_yield.patch [bz#1132806]
  - kvm-mirror-Go-through-ready-complete-process-for-0-len-i.patch [bz#1132806]
  - kvm-qemu-iotests-Test-BLOCK_JOB_READY-event-for-0Kb-imag.patch [bz#1132806]
  - kvm-block-make-top-argument-to-block-commit-optional.patch [bz#1132806]
  - kvm-qemu-iotests-Test-0-length-image-for-mirror.patch [bz#1132806]
  - kvm-mirror-Fix-qiov-size-for-short-requests.patch [bz#1132806]
  - Resolves: bz#1132806
    (advertise active commit to libvirt)


author: Martin Kosek <mkosek@redhat.com> - 3.3.3-28.1
changelog:
  - Server installation fails using external signed certificates with
    "IndexError: list index out of range" (#1130031)
  - Add rhino to BuildRequires to fix Web UI build error


author: Noriko Hosoi <nhosoi@redhat.com> - 1.3.1.6-26
changelog:
  - release 1.3.1.6-26
  - Resolves: #1123864
    EMBARGOED CVE-2014-3562 389-ds-base: 389-ds: unauthenticated information disclosure [rhel-7.0.z] (BZ 1123477)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-29.el7_0.1
changelog:
  - LSN-2014-0003: Don't expand entities when parsing XML (CVE-2014-0179)
  - virNetClientSetTLSSession: Restore original signal mask (rhbz#1112689)
  - Don't use AI_ADDRCONFIG when binding to wildcard addresses (rhbz#1112692)
  - qemu: Unlock the NWFilter update lock by leaving via the cleanup label (rhbz#1112690)


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2-1
changelog:
  - Update to nss-3.16.2
  - Resolves: Bug 1124659 - Rebase RHEL 7.1 to at least NSS-SOFTOKN 3.16.1 (FF 31)


author: Jakub Jelinek <jakub@redhat.com> 4.8.2-16.2
changelog:
  - backport two further OpenMP 4.0 libgomp tasking fixes (#1121077)
  - fix scheduler wrong-code with DEBUG_INSNs containing volatile ASM_OPERANDS
    (#1127120, PR rtl-optimization/61801)


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:1.9.1-3
changelog:
  - Remove arch-specific patch as ant is noarch now
  - Remove bcond macro definitions (provided by rpm itself)
  - Remove Group tags
  - Update to current packaging guidelines
  - Run tests in %check instead of %build
  - Remove dependencies on xerces-j2 and xml-commons-apis, resolves: rhbz#838711
  - Convert %global build_javadoc to conditional
  - Remove bootstrap code, resolves: rhbz#915437
  - Fail the build if any of JARs is empty
  - Skip running tests that fail on Koji, resolves: rhbz#979496
  - Merge scripts into main package, resolves: rhbz#798975


author: Jiri Vanek <jvanek@redhat.com> - 1:1.6.0.1-6.1.13.4
changelog:
  - moved to  icedteaver 1.13.4
  - moved to openjdkver b32 and openjdkdate 15_jul_2014
  - added upstreamed patch patch9 rh1115580-unsyncHashMap.patch
  - Resolves: rhbz#1115869


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 4.14-11
changelog:
  - Spec file fixes for Emacs add-on guideline compliance
  - Move *.el(c) files to their own directory
  - Use Emacs packaging macros
  - Remove unneeded pkgconfig macros


author: Petr Hracek <phracek@redhat.com> - 3.3.2-4
changelog:
  - fix (#858703) add killpgrp(8) man page to the amanda-client package
      (killpgrp will be removed from man-pages package)
  - Fix autogen for parallel tests.


author: Petr Hracek <phracek@redhat.com> - 3.3.3-1
changelog:
  - New upstream version
  - Dependecy to /usr/sbin/service was removed.
   Instead of /usr/sbin/service systemd files are used.


author: Brian C. Lane <bcl@redhat.com> - 19.31.27-1
changelog:
  - Refresh swap suggestion once we know which disks to use (vpodzime)
    Related: rhbz#1016673
  - fix luksformat references (bcl)
    Resolves: rhbz#1014493
  - kickstart: check for correct format (bcl)
    Resolves: rhbz#1014545
  - UIScreen doesn't necessarily have the ready property (vpodzime)
    Related: rhbz#1000409
  - Print long widgets in a nice way (vpodzime)
    Related: rhbz#1000409
  - Take into account disk space when calculating swap suggestion (vpodzime)
    Resolves: rhbz#1016673


author: Brian C. Lane <bcl@redhat.com> - 19.31.28-1
changelog:
  - Fix liveinst to work with livemedia-creator (bcl)
    Resolves: rhbz#1009711
  - Fix initramfs generation for disk image installations. (dlehman)
    Resolves: rhbz#1018925
  - Save mountpoints specified for existing btrfs volumes. (dlehman)
    Resolves: rhbz#1019510
  - Add a command line option for disabling friendly multipath names. (dlehman)
    Resolves: rhbz#977815
  - Keyboard variant names may contain dashes (vpodzime)
    Resolves: rhbz#1017556
  - swap devices should be under the System portion (clumens).
    Resolves: rhbz#1017838
  - Don't try to configure a bootloader for s390 disk image installs. (dlehman)
    Resolves: rhbz#994521
  - Install bootloader to loop device in disk image installations. (dlehman)
    Resolves: rhbz#955202
  - network: look for device settings also based on DEVICE value (rvykydal)
    Resolves: rhbz#1017788


author: Brian C. Lane <bcl@redhat.com> - 19.31.29-1
changelog:
  - Use Unicode in the TUI buffer strings (dshea)
    Resolves: rhbz#1002462
  - Don't ask to start vnc if user specifies text mode. (sbueno+anaconda)
    Resolves: rhbz#959119
  - Do not accept changes if the user presses Esc on summary screen.
    Resolves: rhbz#998384


author: Brian C. Lane <bcl@redhat.com> - 19.31.30-1
changelog:
  - Turn spinner back on for configuration (bcl)
    Related: rhbz#1019970
    Resolves: rhbz#1019970
  - Correctly generate rescue initrd (bcl)
    Related: rhbz#1019970
    Resolves: rhbz#1019970
  - Always regenerate initramfs (bcl)
    Resolves: rhbz#1019970
  - remove signal disconnect (bcl)
    Resolves: rhbz#996899
  - Always use decimal notation for Size specs (dshea)
    Resolves: rhbz#999440
  - network kickstart: add support for devices configured in %pre (rvykydal)
    Resolves: rhbz#1019796
  - network gui spoke: use GDBus to obtain list of settings (rvykydal)
    Resolves: rhbz#1019775
  - network: remove function we don't need anymore (rvykydal)
    Resolves: rhbz#1019775
    Related: rhbz#1019775
  - network gui: make Configure button insensitive when no ap is selected
    (rvykydal)
    Resolves: rhbz#1015212
  - Use a temporary directory for verifying ISO media (dshea)
    Related: rhbz#1017648
  - Skip devices not controllable by blivet (dshea)
    Resolves: rhbz#1017648
  - Use more general status for installations from media (vpodzime)
    Resolves: rhbz#1017703


author: Brian C. Lane <bcl@redhat.com> - 19.31.31-1
changelog:
  - Update bootDrive info when storage config updated in text-mode.
    (sbueno+anaconda)
    Resolves: rhbz#861018
  - Ignore SIGINT (amulhern)
    Resolves: rhbz#971323
  - Make Software spoke ready even if there is no repo (vpodzime)
    Resolves: rhbz#1001054
  - Correctly accept 'sshd' boot arg as alias for 'inst.sshd' (wwoods)
    Resolves: rhbz#924157
  - Fix the Gkbd spec string for layouts with no variant (dshea)
    Resolves: rhbz#1011155
  - mem may not exist when it's printed out in these error messages. (clumens)
    Related: rhbz#1019322
  - Use devicetree to resolve device specs in kickstart. (dlehman)
    Resolves: rhbz#1019322
  - Add bootloader execute before autopart (bcl)
    Resolves: rhbz#1022418
  - BootLoaderError should not reset storage (bcl)
    Resolves: rhbz#1022418
    Related: rhbz#1022418
  - Mountpoint is an attr of the format, not the device. (dlehman)
    Resolves: rhbz#1019510
  - Do error checking of repository names on "Installation Source" screen.
    (amulhern)
    Resolves: rhbz#1020991


author: Brian C. Lane <bcl@redhat.com> - 19.31.32-1
changelog:
  - Send the continue click after the queue is empty (bcl)
    Resolves: rhbz#1025346
  - Fix kickstart block device resolution. (dlehman)
    Resolves: rhbz#1025508
  - No longer use summary screen visit to decide whether bootloader has been
    configured (amulhern)
    Resolves: rhbz#916529
  - Remove the bootloader line from the interactive kickstart file (amulhern)
    Resolves: rhbz#916529
    Related: rhbz#916529
  - Set bootloader default location to mbr in constructor (amulhern)
    Resolves: rhbz#916529
  - Add HDD ISO support for TUI (mkolman)
    Resolves: rhbz#1000327


author: Brian C. Lane <bcl@redhat.com> - 19.31.33-1
changelog:
  - Avoid raising an exception if epdb module unavailable (amulhern)
    Resolves: rhbz#1026779
  - Display a EULA-related warning on progress hub at end of installation.
    (sbueno+anaconda)
    Resolves: rhbz#909309
    Related: rhbz#909309
  - Show last 4 bytes of wwid (jstodola)
    Resolves: rhbz#1024966
  - Display a EULA-related warning on the progress hub at the end of installation. (clumens)
    Related: rhbz#909309
  - Handle focus changes of MountpointSelectors from outside (vpodzime)
    Resolves: rhbz#975838
  - Make network-fetched driver disk .iso files work (vpodzime)
    Resolves: rhbz#1003595
  - Updates to boot-options.txt document (amulhern)
    Related: rhbz#1026385
    Resolves: rhbz#1026385
  - No longer install anaconda user documentation (amulhern)
    Resolves: rhbz#1026385


author: Brian C. Lane <bcl@redhat.com> - 19.31.34-1
changelog:
  - Don't try to unicode unicode strings (vpodzime)
    Resolves: rhbz#1029109
  - Add tmpfs support (mkolman)
    Resolves: rhbz#918621


author: David Cantrell <dcantrell@redhat.com> 1:1.0-3
changelog:
  - Need epoch increased since version is back to 1.0, but it was previously
    the same as the anaconda version number.  jkeating and wwoods said to do
    this too, so blame them.


author: Chris Spike <chris.spike@arcor.de> 1.2-3
changelog:
  - Removed maven* BRs in favour of apache-commons-parent
  - Added deprecated groupId to depmap for compatibility reasons


author: Ray Strode <rstrode@redhat.com> 1.32.0-2
changelog:
  - Switch back to orbit stack by default
  http://lists.fedoraproject.org/pipermail/desktop/2010-October/006568.html


author: Todd Zullinger <tmz@pobox.com> - 8.4.5-3
changelog:
  - Use 'unsafe' mode by default (bug 506953)
  - Install filter scripts in %{_datadir}/asciidoc
  - Convert spec file, CHANGELOG, and README to utf-8
  - Preserve timestamps on installed files, where feasible
  - s/$RPM_BUILD_ROOT/%{buildroot} and drop duplicated /'s
  - Fix rpmlint mixed-use-of-spaces-and-tabs and end-of-line-encoding warnings


author: Karsten Hopp <karsten@redhat.com> 2.69-2
changelog:
  - spec file changes by Ralf Corsépius:
  - Use %bcond_without for --with/out=check.
  - Add BR: perl(Data::Dumper).
  - Remove BR: automake (Testsuite doesn't need automake).
  - Add BR: gcc-gfortran, erlang (Extend testsuite).
  - Remove TESTSUITEFLAGS (Was referring to autoconf < 2.69).
  - Add rpm-4.9 perl-filters %__provides_exclude, %__requires_exclude.
    Remove rpm-4.8 perl-filters (Address RHBZ 823770).
  - Reflect autoconf being GPLv3'ed.
  - Add BR: perl-macros, Remove BR: perl-devel


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-20
changelog:
  - fix master map mount options matching.
  - fix master map bogus keywork match.
  - fix fix map entry duplicate offset detection.
  - add a number of fixes based on a Covarity report.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-28
changelog:
  - bz983160 Package autofs-5.0.7-22.el7 failed RHEL7 RPMdiff testing
    - fix add null check in parse_server_string() (bz979155).
    - check for protocol option.
    - use ulimit max open files if greater than internal maximum.
    - fix default path used for unitdir.
    - fix changelog inconsistent dates.
    - fix default path used for unitdir.
    - fix changelog inconsistent dates.
    - link with full reloc options.
    - fix a couple of compiler warnings.
    - add after sssd dependency to unit file (bz984089).
  - Resolves: rhbz#983160
  +


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-29
changelog:
  - bz994352 - "autofs reload" causes automount to stop running when multiple
    maps are removed from auto.master
    - fix syncronize handle_mounts() shutdown.
  - bz994359 - Wildcard in nested mounts regression
    - fix fix wildcard multi map regression.
  - Resolves: rhbz#994352 rhbz#994359


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-30
changelog:
  - bz852327 - RFE: feature to dump automount maps in native file format
    - fix dumpmaps multi output.
    - try and cleanup after dumpmaps.
    - teach dumpmaps to output simple key value pairs.
  - Resolves: rhbz#852327


author: Ville Skyttä <ville.skytta@iki.fi> - 1.3.1-7
changelog:
  - Tweak source encoding to fix build with Java 1.7.
  - Drop versioned jars and javadoc dir.
  - Drop no longer needed javadoc Obsoletes.
  - Crosslink with local JDK API docs.


author: Lorenzo Villani <lvillani@binaryhelix.net> - 1.0-0.10.rc2
changelog:
  - fix package summary and descriptions (as requested by Richard Hughes)
  - match cmake minimum required version with the contents of CMakeLists.txt
    (paranoid fix)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.17-1
changelog:
  - fix wrong exit value of --savebackup action
  - do not crash on broken SSSD configuration
  - use pam_pwquality instead of pam_cracklib


author: Tomas Mraz <tmraz@redhat.com> - 6.2.2-1
changelog:
  - use the new --noac option with ipa-client-install
  - add sss to the services entry in nsswitch.conf
  - call res_init() to reread resolv.conf before res_send()
  - updated translations


author: Tomas Mraz <tmraz@redhat.com> - 6.2.3-1
changelog:
  - fix missing linkage to libresolv
  - add missing requires of openssl binary for cacertdir_rehash
  - install missing packages via PackageKit (original patch by Stef Walter)
  - add pam_lastlog to postlogin PAM configuration to display failed login
    attempts
  - enable the allow_ypbind SELinux boolean when enabling NIS
  - try to preserve the dns_lookup_kdc and dns_lookup_realm settings
  - do not use cached_login in password stack for pam_winbind


author: Tomas Mraz <tmraz@redhat.com> - 6.2.4-1
changelog:
  - backup also passwd and friends when toggling enableshadow (#853074)
  - use the new smb.conf idmap config range syntax (#850824)
  - use local_users_only with pam_pwquality (#849072)
  - enable the authlogin_nsswitch_use_ldap SELinux boolean when enabling LDAP (#846084)
  - preserve the value of cache_credentials in sssd.conf
  - do not fail PAM session if pam_lastlog module fails
  - use sssd also for automount map (#847823)
  - enable deferred_kinit if cache_credentials is enabled (#814384)


author: Rex Dieter <rdieter@fedoraproject.org> - 4.9.97-2
changelog:
  - Ark needs to know about application/x-source-rpm (#885316)
  - Improve subfolder autodetection (kde review 107634)
  - Don't delete the KPart in the MainWindow destructor (kde review 107635)


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:4.3-1
changelog:
  - Latest version
  - Split into two jars, provide backward compatible symlink
  - Cleanups according to new guidelines


author: Roman Rakus <rrakus@redhat.com> - 4.2.37-7
changelog:
  - Update info about trap in man page
    Resolves: #799958
  - instead of setting the signal handler to SIG_IGN while installing
    the new trap handler, block the signal and unblock it after the new handler
    is installed
    Resolves: #695656


author: Rex Dieter <rdieter@fedoraproject.org>
changelog:
  - 7.2b-2
  - backport patches from gc-7_2-hotfix-2 branch in lieu of 7.2c release
  - gc 7.2 final abi broken when changing several symbols to hidden (#825473)
  - CVE-2012-2673 gc: malloc() and calloc() overflows (#828878)


author: Jiri Vanek <jvanek@redhat.com> 1.7-14
changelog:
  - Solving jdk7's  removed internal (since 1.4.2 deprecated) com.sun.image.codec package
  - Gripped new sources from 1.8pre trunk which have support adapters for removed classes,
  - Removed all old an unused tiff classes from it -  org.apache.batik.ext.awt.image.code.tiff
  - Added requires JAI which provides tiff support
  - Added inner_version variable, which helps to keep 1.8 outside and 1.8pre inside


author: Ondrej Vasik <ovasik@redhat.com> 1.06.95-2
changelog:
  - fix possible segfault in arrays handling(debbug #586969)
  - initialize f_void to work with math lib again(#664080)


author: Tomas Hozza <thozza@redhat.com> 32:9.9.3-5.P2
changelog:
  - update to 9.9.3-P2 (fix for CVE-2013-4854)
  - update RRL patch to 9.9.3-P2-rl.13207.22
  - Fix script for setting up chroot so it unmounts everything successfully


author: Praveen K Paladugu <praveen_paladugu@dell.com> - 0.4.0-1
changelog:
  - Create detached signature
  - Fix man page to use new naming convention
  - Remove unused variables from Stephen Hemminger [shemminger@vyatta.com]
  - Use Physical device for slot numbering for embedded SR-IOV cards
  - Add tracking of ifindex to eths structure
  - Fix naming for add-in network adapters when SMBIOS version is invalid
  - Read VPD-R on Dell systems only


author: Praveen K Paladugu <praveen_paladugu@dell.com> - 0.4.1-1
changelog:
  - Fix autoconfig for Fedora systems
  - Make sure that vpd scan only runs on Dell systems, also blacklist Atheros
    wireless cards which hang when vpd is read.
  - Add fixes to biosdevname to support cards that export multiple network
    ports per PCI device (chelsio/mellanox).


author: Petr Machata <pmachata@redhat.com> - 1.53.0-5
changelog:
  - Split off Python 3 DSO symlink to a separate subpackage
    boost-python3-devel.  This makes it possible to install
    boost-devel separately, without Python 3 support.
  - Build with -fno-strict-aliasing


author: Petr Machata <pmachata@redhat.com> - 1.9.20100610-1
changelog:
  - Rebase to 20100610
  - Update the description in accordance with upstream spec template
  - Resolves: #643598


author: Richard Hughes <richard@hughsie.com> 0.1.31-1
changelog:
  - New upstream version
  - Calculate the display calibration based on the Lab and target display gamma
  - Interpolate the gamma data to the VCGT size using Akima
  - Add some more display vendor names to the display fixup table
  - Fix the argyll sensor driver when using the ColorMunki Smile
  - Fix the gamut warning to check primaries wider than CIERGB and ProPhoto
  - Move the private sensor libraries out of the pure lib space


author: Richard Hughes <richard@hughsie.com> 0.1.32-1
changelog:
  - New upstream version
  - Add a new tool 'cd-iccdump' that can dump V4 and V2 profiles
  - Add translated descriptions to the ICC profiles


author: Jakub Hrozek <jhrozek@redhat.com> - 1.7.5-1
changelog:
  - New upstream release 1.7.5
  - Obsoletes patch #2
  - Rebase patch #1 (optflags) to match the 1.7.5 code
  - Fixed Source0 URL to point at the upstream tarball


author: Kai Engert <kaie@redhat.com> - 2012.87-9.fc19.1
changelog:
  - adjust to changed and new functionality provided by p11-kit 0.17.3
  - updated READMEs to describe the new directory-specific treatment of files
  - ship a new file that contains certificates with neutral trust
  - ship a new file that contains distrust objects, and also staple a 
    basic constraint extension to one legacy root contained in the
    Mozilla CA list
  - adjust the build script to dynamically produce most of above files
  - add and own the anchors and blacklist subdirectories
  - file generate-cacerts.pl is no longer required


author: Adam Jackson <ajax@redhat.com> 1.12.6-2
changelog:
  - *-x{c,li}b-Don-t-crash-when-swapping-a-0-sized-glyph.patch: Fix some
    crashes when client and server endian don't match.


author: Jakub Jelinek <jakub@redhat.com> 3.2.3-68
changelog:
  - strip -march=z9-109 and -mtune=z10 from OPT_FLAGS on s390, s390x
    (#523209)
  - make sure to use system libgcc_s.so.1 instead of gcc32 one during
    testing


author: Rick L Vinyard Jr <rvinyard@cs.nmsu.edu> - 1.9.1-1
changelog:
  - New upstream release
  - Removed html docs from -devel package
  - Seperated requires into one per line
  - Fixed devhelp docs


author: Parag Nemade <pnemade AT redhat DOT com> - 0.4.5-1
changelog:
  - Update to 0.4.5
  - Resolves:rh#744852 - Pressing | in on-screen keyboard produces <
  - Resolves:rh#880379 - Another service acquired %s, quitting..
  - Resolves:rh#880382


author: Matthias Saou <http://freshrpms.net/> 10.2-6
changelog:
  - Fix all of the problems detected during the review which aren't acceptable
    according to the current policies and guidelines (part of #225638).
  - Don't prefix summaries with "A" nor suffix them with a dot.
  - Move .so symlink to the devel sub-package (#203620).
  - Add highest known version to the cdparanoia-III obsoletes.
  - Remove incorrect buildroot removal from %build.
  - Use acceptable %clean section.
  - Provide cdparanoia-static in the devel sub-package since the *.a is there.
  - Use single-command scriplet syntax for /sbin/ldconfig calls.
  - Escape all macros in changelog.
  - Include license file since it is present with the sources.


author: Karsten Hopp <karsten@redhat.de> 1.10-24
changelog:
  - added development manpages
  - as there are no manpages for the executables available, added at least
    a FAQ (#172324)


author: Honza Horak <hhorak@redhat.com> - 1.1.11-12
changelog:
  - Use system cdparanoia instead of old bundled version
  - Build libusal as a shared library
  - Messages from rpmlint clean-up


author: Ondrej Vasik <ovasik@redhat.com> 8.21-12
changelog:
  - pr -e, with a mix of backspaces and TABs, could corrupt the heap
    in multibyte locales (analyzed by J.Koncicky)
  - Fix sort multibyte incompatibilities (by O.Oprala)
  - change the TMP variable name in colorls.csh to _tmp (#981373)
  - optimization of colorls scripts by Ville Skytta (#961012)


author: Nalin Dahyabhai <nalin@redhat.com> 0.63-1
changelog:
  - serialize access to NSS databases and the running of pre- and post-save
    commands which might also access them (possibly fixing part of #883484)


author: Nalin Dahyabhai <nalin@redhat.com> 0.64-1
changelog:
  - at startup, if we resume the state machine for a given certificate to a state
    which expects to have the newly-added lock already acquired, acquire it
    before moving on with the certificate's work (still aimed at fixing #883484)


author: Bastien Nocera <bnocera@redhat.com> 3.8.5-3
changelog:
  - Patch from Bill Nottingham to use the Pretty name in priority
    to the name+version in the details panel
    Resolves: #988613


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.5.2-3
changelog:
  - Fixed passing NULL array from get_instance
  - Add bindings for CMTraceMessage
    (patches by Jan Safranek)


author: Bill Nottingham <notting@redhat.com> 1.3.53-1
changelog:
  - ntsysv: change the default to configure runlevels 2/3/4/5 (#709254)
  - alternatives: check whether the --initscript param is a systemd service, act appropriately (#714830)
  - forward chkconfig --del to systemctl disable where necessary


author: Bill Nottingham <notting@redhat.com> 1.3.54-1
changelog:
  - alternatives: fix --initscript systemd support (#714830)
  - revert forwarding of 'chkconfig --del' to 'systemctl disable'


author: Miroslav Lichvar <mlichvar@redhat.com> 1.27-0.5.pre1.git1ca844
changelog:
  - update to git snapshot 1ca844
  - update systemd integration (#846303)
  - use systemd macros if available (#850151)
  - use correct vendor pool.ntp.org zone on RHEL (#845981)
  - don't log output of chrony-wait service


author: Miroslav Lichvar <mlichvar@redhat.com> 1.27-1
changelog:
  - update to 1.27
  - start chrony-wait service with chronyd
  - start chronyd service after sntp
  - remove obsolete macros


author: Nalin Dahyabhai <nalin@redhat.com> - 2.8.22-1
changelog:
  - update to 2.8.22 (#887461), which now returns an error instead of exiting
    when there's a failure opening the dictionary in FascistCheck()


author: Nalin Dahyabhai <nalin@redhat.com> - 2.9.0-1
changelog:
  - update to 2.9.0 (#970065)
    - adds FascistCheckUser()
  - go ahead and compress the main dictionary, since we're linking with zlib
    anyway


author: Dave Anderson <anderson@redhat.com> - 1.0-1.2
changelog:
  - fix Makefile to account for s390 build
  - change exclusive arch entry from i386 to {ix86}
  - Resolves: rbhz#545564


author: Dave Anderson <anderson@redhat.com> - 1.0-2
changelog:
  - Fix for segmentation violation with "trace show -c cpu" command,
    and add "trace dump -t" command.
    Resolves: rbhz#592887


author: Anton Arapov <anton@redhat.com> - 1:2.11-5
changelog:
  - Fix the wrong call of the dmi_chassis_type function call. Thus fix
    an issue on the systems with the chassis lock available, application
    doesn't fall out with the out of spec error anymore.


author: Heinz Mauelshagen <heinzm@redhat.com> - 1.0.0.rc16-12
changelog:
  - Create symlink from full versioned libdmraid dso file to libdmraid.so.1
    (ie. soname we use for linking)
  - Resolves: bz#557276


author: John W. Linville <linville@redhat.com> 1.1.2_2011.04.28-1
changelog:
  - Update crda to version 1.1.2
  - Update wireless-regdb to version 2011.04.28 
  - Fix mis-numbered version comment in changelog for Nov 23 2010


author: Ondrej Vasik <ovasik@redhat.com> - 1.1-2
changelog:
  - rpmlint check
  - /etc/ files marked as config, fixed bad requirements
  - cosmetic cleanup of spec file


author: Harald Hoyer <harald@redhat.com> 032-23
changelog:
  - do not fail on empty dracut module directories
  Resolves: rhbz#1003153
  - parse cmdline parameter, even if rootok=1
  Resolves: rhbz#978330
  - fixed ibft_to_cmdline()


author: Harald Hoyer <harald@redhat.com> 033-26
changelog:
  - create /dev/mapper/live-base for anaconda
  Resolves: rhbz#1009710
  - support "rootfallback=<root fallback device>"
  Resolves: rhbz#727333
  - add UEFI FCoE boot support
  Resolves: rhbz#732059
  - Make udev db records for MD devices persistent
    so LVM on MD autoactivation works correctly
  Resolves: rhbz#1017031
  - support mdadm-3.2.6+ and mdadm-3.3+
  - install lvm thin utils for non-hostonly also


author: Harald Hoyer <harald@redhat.com> 033-39
changelog:
  - fixed booting with rd.iscsi.firmware and without root=
  Resolves: rhbz#1024858
  - fixed resuming
  - fix swap detection in hostonly
  - fixed missing modules in hostonly, which have no modalias
  Resolves: rhbz#1015284
  - moved dracut to /usr/sbin


author: Harald Hoyer <harald@redhat.com> 033-40
changelog:
  - fips: include crct10dif_generic
  Resolves: rhbz#1024455
  - add /etc/system-fips in the initramfs
  Resolves: rhbz#1014284


author: Tomáš Mráz <tmraz@redhat.com> - 1.4.10-5
changelog:
  - add support for RANDOM_DELAY - delaying job startups
  - pass some environment variables to processes (LANG, etc.) (#969761)
  - do not use putenv() with string literals (#971516)


author: Elio Maldonado <emaldona@redhat.com> - 2.4.1-33
changelog:
  - Resolves: Bug 782142 - keyutil should use error string utilities provided by nss since 3.13
  - Update Requires and BuildRequires nss and nss-util mininimum versions
  - Add needed line breaks to the keyutil usage message


author: Sumit Bose <sbose@redhat.com> - 1.2.39-1
changelog:
  - Update to ctdb version 1.2.39
   - Added support for systemd

  - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild


author: Pravin Satpute <psatpute@redhat.com> - 0.120-1
changelog:
  - Upstream new release.
  - Added new families Hadasim CLM, Keter YG, Simple CLM, Stam Ashkenaz CLM, Stam Sefarad CLM


author: Marek Kasik <mkasik@redhat.com> - 0.1.3-2
changelog:
  - Make ppd-name parameter optional
  - Readd patch for allowing authentication for any and inactive users
  - Readd patch for check of result of polkit authorization check
  - Resolves: #724959


author: Kamil Dudka <kdudka@redhat.com> 7.29.0-3
changelog:
  - switch SSL socket into non-blocking mode after handshake (#960765)
  - drop the hide_selinux.c hack no longer needed in %check


author: Kamil Dudka <kdudka@redhat.com> 7.29.0-4
changelog:
  - do not ignore poll() failures other than EINTR (#919127)
  - curl_global_init() now accepts the CURL_GLOBAL_ACK_EINTR flag (#919127)


author: Kamil Dudka <kdudka@redhat.com> 7.29.0-6
changelog:
  - prevent an artificial timeout event due to stale speed-check data (#906031)
  - show proper host name on failed resolve (#957173)


author: Ville Skyttä <ville.skytta@iki.fi> - 2.2-0.4.b1
changelog:
  - Apply David D. Kilzer's dynamic log buffer allocation patch (#516083,
    Andreas Schwab).
  - Use %global instead of %define.


author: Petr Lautrbach <plautrba@redhat.com> 2.1.26-7
changelog:
  - fix the spec file in order to build the cyrus-sasl-sql plugin
    with support for PostgreSQL and MySQL


author: Josh Stone <jistone@redhat.com>
changelog:
  - Tweak the configure/make commands
  - Disable the testsuite via configure.
  - Set the private includedir and libdir via configure.
  - Set VERBOSE_COMPILATION for make.
  - Use DESTDIR for make install.


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:1.2-12
changelog:
  - Fix pom filename (Resolves rhbz#655795)
  - Remove clean section and buildroot declaration
  - Remove versioned jars and pom files


author: Jaroslav Škarvada <jskarvad@redhat.com> - 3.0.15-1
changelog:
  - New version
    Resolves: rhbz#913884
  - Dropped patches: fix-alloc-rootdir-entry, dev-detect-fix (all upstreamed)


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.0.13-7
changelog:
  - Override config.{sub,guess} explicitly due to redhat-rpm-build-config
    behavior change on F-10+, otherwise build fails on ppc64


author: - Jonathan Dieter <jdieter@lesbg.com> - 3.6-0.6.20110223git
changelog:
  - Fix makedeltaiso so it (partially) works when compression formats change
  - Fix fix for makedeltaiso so it gets checksums right


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.1-1
changelog:
  - dovecot updated to 2.2.1
  - mailbox_list_index=yes was broken.
  - LAYOUT=index didn't list subscriptions.
  - auth: Multiple master passdbs didn't work.
  - Message parsing (e.g. during search) crashed when multipart message
    didn't actually contain any parts.
  - dovecot updated to 2.2.1


author: Michal Hlavinka <mhlavink@redhat.com> - 1:2.2.2-1
changelog:
  - dovecot updated to 2.2.2
  - IMAP: Various URLAUTH fixes.
  - IMAP: Fixed a hang with invalid APPEND parameters.
  - IMAP LIST-EXTENDED: INBOX was never listed with \Subscribed flag.
  - mailbox_list_index=yes still caused crashes.
  - maildir: Fixed a crash after dovecot-keywords file was re-read.
  - maildir: If files had reappeared unexpectedly to a Maildir, they
    were ignored until index files were deleted.
  - Maildir: Fixed handling over 26 keywords in a mailbox. 
  - imap/pop3-login proxying: Fixed a crash if TCP connection succeeded,
    but the remote login timed out.


author: Paul Wouters <pwouters@redhat.com> - 0.11-6
changelog:
  - Patched daemon to remove immutable attr (rhbz#842455) as the
    systemd ExecStopPost= target does not seem to work


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-49
changelog:
  - Modify 0020-RHBZ-907360-static-pthread-init.patch
    * Don't initialize uevent list twice
  - Add 0029-RH-no-prio-put-msg.patch
  - Add 0030-RHBZ-916528-override-queue-no-daemon.patch
    * Default to "queue_without_daemon no"
    * Add "forcequeueing daemon" and "restorequeueing daemon" cli commands
  - Modify spec file to force queue_without_daemon when restarting
    multipathd on upgrades.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-50
changelog:
  - Add 0031-RHBZ-957188-kpartx-use-dm-name.patch
    * use the basename of the devices that will be created to choose the
      delimiter instead of using the device name from the command line
  - Resolves: bz #957188


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-51
changelog:
  - Add 0032-RHBZ-956464-mpathconf-defaults.patch
    * fix defaults listed in usage
  - Add 0033-RHBZ-829963-e-series-conf.patch
  - Add 0034-RHBZ-851416-mpathconf-display.patch
    * display whether or not multipathd is running in the status
  - Add 0035-RHBZ-891921-list-mpp.patch
    * add a new path format wilcard to list the multipath device associated
      with a path
  - Add 0036-RHBZ-949239-load-multipath-module.patch
    * load the dm-multipath kernel module when multipathd starts
  - Add 0037-RHBZ-768873-fix-rename.patch
    * When deciding on a multipth devices name on reload, don't default to
      the existing name if there is no config file alias and user_friendly_names
      isn't set. Use the wwid.
  - Modify multipath.conf
  - Resolves: bz #768873, #950252


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-52
changelog:
  - Add 0038-RHBZ-799860-netapp-config.patch
  - Add 0039-RH-detect-prio-fix.patch
    * Don't autodetect ALUA prioritizer unless it actually can get a priority
  - Add 0040-RH-bindings-fix.patch
    * Do a better job of trying to get the first free user_friendly_name
  - Add 0041-RH-check-for-erofs.patch
    * Don't create/reload a device read-only unless doing it read/write fails
      with EROFS
  - Remove 0017-RH-fix-sigusr1.patch
    * fix signal handling upstream way instead
  - Add 0042-UP-fix-signal-handling.patch
    * uxlsnr now handles all the signals sent to multipathd. This makes its
      signal handling posix compliant, and harder to mess up.
  - Add 0043-RH-signal-waiter.patch
    * ioctl isn't a pthread cancellation point.  Send a signal to the waiter
      thread to break out of waiting in ioctl for a dm event.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-53
changelog:
  - Add 0044-RHBZ-976688-fix-wipe-wwids.patch
    * Seek back to the start of the file after truncating it
  - Add 0045-RHBZ-977297-man-page-fix.patch
    * update man page to match actual defaults
  - Add 0046-RHBZ-883981-move-udev-rules.patch
    * move udev rules file from /lib to /usr/lib
  - Resolves: bz #883981, #976688, #977297


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-54
changelog:
  - Modify 0015-RH-fix-output-buffer.patch
    * Fix memory leak
  - Add 0047-RHBZ-kpartx-read-only-loop-devs.patch
    * Fix read only loop device handling
  - Add 0048-RH-print-defaults.patch
  - Add 0049-RH-remove-ID_FS_TYPE.patch
    * remove ID_FS_TYPE udev enviroment variable for multipath devices
  - Add 0051-UP-fix-cli-resize.patch
    * check before dereferencing variables
  - Add 0052-RH-fix-bad-derefs.patch
    * setup multipath free the multipath device when it fails, so don't keep
      using it.
  - Add 0053-UP-fix-failback.patch
    * setting failback in the devices section was broken
  - Add 0054-UP-keep-udev-ref.patch
    * multipathd needs to keep the same udev object across reconfigures
  - Add 0055-UP-handle-quiesced-paths.patch
    * quiesced paths should be treated as down
  - Add 0056-UP-alua-prio-fix.patch
    * Don't count the preferred bit for paths that are active/optimized
  - Add 0057-UP-fix-tmo.patch
    * Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo.  Also
      make multipath get changing values directly from sysfs, instead of
      from udev, which caches them.
  - Add 0058-UP-fix-failback.patch
    * make failback print the default value when you show configs.
  - Add 0059-UP-flush-failure-queueing.patch
    * If you can't flush a multipath device, restore the queue_if_no_paths
      value
  - Add 0060-UP-uevent-loop-udev.patch
    * make ueventloop grab it's own udev reference, since it is cancelled
      asychnrously.


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-55
changelog:
  - Add 0061-RH-display-find-mpaths.patch
  - Add 0062-RH-dont-free-vecs.patch
    * freeing vecs causes a number of races which can crash multipathd on
      shutdown.
  - Add 0063-RH-fix-warning.patch


author: Benjamin Marzinski <bmarzins@redhat.com> 0.4.9-56
changelog:
  - Add 0064-RHBZ-1010040-fix-ID_FS-attrs.patch
    * make multipath create a timestamp file /run/multipathd/timestamp, and
      add -T<timestamp>:<valid> option to shortcut processing if the
      timestamp hasn't changed
  - Resolves: bz #1010040


author: Brian Pepple <bpepple@fedoraproject.org> - 3.8.0-1
changelog:
  - Update to 3.8.0.
  - Remove nautilus extension, since nautilus-sendto has removed this functionality.


author: Jakub Hrozek <jhrozek@redhat.com> - 0.2.91-14
changelog:
  - include a patch to get rid of autoreconf warnings
  - run autoreconf before configure
  - Resolves: #925258


author: Peter Robinson <pbrobinson@fedoraproject.org> - 3.9.90-1
changelog:
  - Ekiga 3.9.90 devel - Changelog
    ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.9/ekiga-3.9.90.news


author: Mark Wielaard <mjw@redhat.com> - 0.155-5
changelog:
  - Add ARM variant to elfutils-0.155-binutils-pr-ld-13621.patch rhbz#914908.
  - rhel >= 5 has xz-devel


author: Jan Kratochvil <jan.kratochvil@redhat.com> 0.156-1
changelog:
  - Update to 0.156.
    - #890447 - Add __bss_start and __TMC_END__ to elflint.
    - #909481 - Only try opening files with installed compression libraries.
    - #914908 - Add __bss_start__ to elflint.
    - #853757 - Updated Polish translation.
    - #985438 - Incorrect prototype of __libdwfl_find_elf_build_id.
    - Drop upstreamed elfutils-0.155-binutils-pr-ld-13621.patch.
    - Drop upstreamed elfutils-0.155-mem-align.patch.
    - Drop upstreamed elfutils-0.155-sizeof-pointer-memaccess.patch.


author: Petr Hracek <phracek@redhat.com> - 1:24.3-1
changelog:
  - Updated to the newest upstream release
  - solved problem with distribution flag in case of rhel
  - rcs-checking not availble anymore
  - emacs22.png are not installed anymore


author: Ales Ledvinka <aledvink@redhat.com> - 1.2.3-1
changelog:
  - Updated to freeipmi-1.2.3:
   - In ipmi-oem, support new Dell Poweredge R720 OEM commands extensions,
     including:
    - get-nic-selection-failover
    - set-nic-selection-failover
    - power-monitoring-over-interval
    - power-monitoring-interval-range
    - get-last-post-code
   - In ipmi-oem, update active-lom-status for Dell Poweredge R720.
   - In ipmi-oem, support new Dell Poweredge R720 get-system-info option
     'cmc-info'.
   - In ipmi-oem, Dell get-system-info "slot-number" key changed to
     "blade-slot-info".  Legacy option still supported.
   - In ipmi-sel, support Dell Poweredge R720 OEM SEL extensions.
   - In all tools, support nochecksumcheck workaround option.
   - In all daemons (ipmiseld, ipmidetectd, bmc-watchdog), check for
     syscall errors during daemon setup.

   - In libfreeipmi, support Dell R720 OEM extension intepretations.
   - In libfreeipmi, libipmimonitoring, and libipmiconsole, support
     NO_CHECKSUM_CHECK workaround flag.
   - In libipmiconsole, IPMICONSOLE_DEBUG_FILE logs debug to files in
     current working directory and not /var/log.  PID is also appended to
     debug files.


author: Ales Ledvinka <aledvink@redhat.com> - 1.2.4-1
changelog:
  - Updated to freeipmi-1.2.4:
   - Support Supermicro X9DRI-LN4F+ OEM sensors and events.
   - Fix output corner case for "session-based" channels.
   - Fix ipmi-oem set-power-restore-delay corner case in time settings.
   - Fix ipmiseld memleak.
   - Fix libfreeipmi potential fd leak when generating random numbers.
   - Fix libfreeipmi error output bug in RMCP interface.
   - Fix several minor corner cases discovered by static code analysis.


author: Marek Kasik <mkasik@redhat.com> - 3.8.0-2
changelog:
  - Don't remove the NoDisplay key from evince.desktop because
  - it has been already removed
  - Related: gnome#634245


author: Milan Crha <mcrha@redhat.com> - 3.8.5-6
changelog:
  - Remove the dependency on libytnef, which apparently isn't needed for the
    PST importer and we don't build the experimental TNEF attachments plugin
  - Update patch for RH bug #962756 (F1 launches help when evolution-help is not installed)
  - Add patch for RH bug #864904 (Auto-wrap long anchors in message preview)


author: Milan Crha <mcrha@redhat.com> - 3.8.5-7
changelog:
  - Disabled modification of .po files before build (it causes multilib issues,
    though a disadvantage is a larger evolution package)
  - Add patch for RH bug #965696 (Signature/encryption bar may not inherit text color from theme)


author: Milan Crha <mcrha@redhat.com> - 3.8.5-1
changelog:
  - Update to 3.8.5
  - Bump nss version requirement to 3.14
  - Add patch for RH bug #995516 (Crash in certificate viewer)
  - Add patch for RH bug #995702 (Autocreate 'tmp' in maildir)


author: Thomas Woerner <twoerner@redhat.com> 0.3.3-1
changelog:
  - new service files
  - relicensed logger.py under GPLv2+
  - firewall-config: sometimes we don't want to use client's exception handler
  - When removing Service/IcmpType remove it from zones too (RHBZ#958401)
  - firewall-config: work-around masquerade_check_cb() being called more times
  - Zone(IO): add interfaces/sources to D-Bus signature
  - Added missing UNKNOWN_SOURCE error code
  - fw_zone.check_source: Raise INVALID_FAMILY if family is invalid
  - New changeZoneOfInterface method, marked changeZone as deprecated
  - Fixed firewall-cmd man page entry for --panic-on
  - firewall-applet: Fixed possible problems of unescaped strings used for markup
  - New support to bind zones to source addresses and ranges (D-BUS, cmd, applet
  - Cleanup of unused variables in FirewallD.start
  - New firewall/fw_types.py with LastUpdatedOrderedDict
  - direct.chains, direct.rules: Using LastUpdatedOrderedDict
  - Support splitted zone files
  - New reader and writer for stored direct chains and rules
  - LockdownWhitelist: fix write(), add get_commands/uids/users/contexts()
  - fix service_writer() and icmptype_writer() to put newline at end of file
  - firewall-cmd: fix --list-sources
  - No need to specify whether source address family is IPv4 or IPv6
  - add getZoneOfSource() to D-Bus interface
  - Add tests and bash-completion for the new "source" operations
  - Convert all input args in D-Bus methods
  - setDefaultZone() was calling accessCheck() *after* the action
  - New uniqify() function to remove duplicates from list whilst preserving order
  - Zone.combine() merge also services and ports
  - config/applet: silence DBusException during start when FirewallD is not running (RHBZ#966518)
  - firewall-applet: more fixes to make the address sources family agnostic
  - Better defaults for lockdown white list
  - Use auth_admin_keep for allow_any and allow_inactive also
  - New D-Bus API for lockdown policies
  - Use IPv4, IPv6 and BRIDGE for FirewallD properties
  - Use rich rule action as audit type
  - Prototype of string-only D-Bus interface for rich language
  - Fixed wrongly merged source family check in firewall/core/io/zone.py
  - handle_cmr: report errors, cleanup modules in error case only, mark handling
  - Use audit type from rule action, fixed rule output
  - Fixed lockdown whitelist D-Bus handling method names
  - New rich rule handling in runtime D-Bus interface
  - Added interface, source and rich rule handling (runtime and permanent)
  - Fixed dbus_obj in FirewallClientConfigPolicies, added queryLockdown
  - Write changes in setLockdownWhitelist
  - Fixed typo in policies log message in method calls
  - firewall-cmd: Added rich rule, lockdown and lockdown whitelist handling
  - Don't check access in query/getLockdownWhitelist*()
  - firewall-cmd: Also output masquerade flag in --list-all
  - firewall-cmd: argparse is able to convert argument to desired type itself
  - firewall-cmd_test.sh: tests for permanent interfaces/sources and lockdown whitelist
  - Makefile.am: add missing files
  - firewall-cmd_test.sh: tests for rich rules
  - Added lockdown, source, interface and rich rule docs to firewall-cmd
  - Do not masquerade lo if masquerade is enabled in the default zone (RHBZ#904098)
  - Use <rule> in metavar for firewall-cmd parser


author: Jiri Popelka <jpopelka@redhat.com>
changelog:
  - Remove migrating to a systemd unit file from a SysV initscript
  - Remove pointless "ExclusiveOS" tag


author: Thomas Woerner <twoerner@redhat.com> 0.3.4-1
changelog:
  - several rich rule check enhancements and fixes
  - firewall-cmd: direct options - check ipv4|ipv6|eb (RHBZ#970505)
  - firewall-cmd(1): improve description of direct options (RHBZ#970509)
  - several firewall-applet enhancements and fixes
  - New README
  - several doc and man page fixes
  - Service definitions for PCP daemons (RHBZ#972262)
  - bash-completion: add lockdown and rich language options
  - firewall-cmd: add --permanent --list-all[-zones]
  - firewall-cmd: new -q/--quiet option
  - firewall-cmd: warn when default zone not active (RHBZ#971843)
  - firewall-cmd: check priority in --add-rule (RHBZ#914955)
  - add dhcpv6 (for server) service (RHBZ#917866)
  - firewall-cmd: add --permanent --get-zone-of-interface/source --change-interface/source
  - firewall-cmd: print result (yes/no) of all --query-* commands
  - move permanent-getZoneOf{Interface|Source} from firewall-cmd to server
  - Check Interfaces/sources when updating permanent zone settings.
  - FirewallDConfig: getZoneOfInterface/Source can actually return more zones
  - Fixed toaddr check in forward port to only allow single address, no range
  - firewall-cmd: various output improvements
  - fw_zone: use check_single_address from firewall.functions
  - getZoneOfInterface/Source does not need to throw exception
  - firewall.functions: Use socket.inet_pton in checkIP, fixed checkIP*nMask
  - firewall.core.io.service: Properly check port/proto and destination address
  - Install applet desktop file into /etc/xdg/autostart
  - Fixed option problem with rich rule destinations (RHBZ#979804)
  - Better exception creation in dbus_handle_exceptions() decorator (RHBZ#979790)
  - Updated firewall-offline-cmd
  - Use priority in add, remove, query and list of direct rules (RHBZ#979509)
  - New documentation (man pages are created from docbook sources)
  - firewall/core/io/direct.py: use prirority for rule methods, new get_all_ methods
  - direct: pass priority also to client.py and firewall-cmd
  - applet: New blink and blink-count settings
  - firewall.functions: New function ppid_of_pid
  - applet: Check for gnome3 and fix it, use new settings, new size-changed cb
  - firewall-offline-cmd: Fix use of systemctl in chroot
  - firewall-config: use string.ascii_letters instead of string.letters
  - dbus_to_python(): handle non-ascii chars in dbus.String.
  - Modernize old syntax constructions.
  - dict.keys() in Python 3 returns a "view" instead of list
  - Use gettext.install() to install _() in builtins namespace.
  - Allow non-ascii chars in 'short' and 'description'
  - README: More information for "Working With The Source Repository"
  - Build environment fixes
  - firewalld.spec: Added missing checks for rhel > 6 for pygobject3-base
  - firewall-applet: New setting show-inactive
  - Don't stop on reload when lockdown already enabled (RHBZ#987403)
  - firewall-cmd: --lockdown-on/off did not touch firewalld.conf
  - FirewallApplet.gschema.xml: Dropped unused sender-info setting
  - doc/firewall-applet.xml: Added information about gsettings
  - several debug and log message fixes
  - Add chain for sources so they can be checked before interfaces (RHBZ#903222)
  - Add dhcp and proxy-dhcp services (RHBZ#986947)
  - io/Zone(): don't error on deprecated family attr of source elem
  - Limit length of zone file name (to 12 chars) due to Netfilter internals.
  - It was not possible to overload a zone with defined source(s).
  - DEFAULT_ZONE_TARGET: {chain}_ZONE_{zone} -> {chain}_{zone}
  - New runtime get<X>Settings for services and icmptypes, fixed policies callbacks
  - functions: New functions checkUser, checkUid and checkCommand
  - src/firewall/client: Fixed lockdown-whitelist-updated signal handling
  - firewall-cmd(1): move firewalld.richlanguage(5) reference in --*-rich-rule
  - Rich rule service: Only add modules for accept action
  - firewall/core/rich: Several fixes and enhanced checks
  - Fixed reload of direct rules
  - firewall/client: New functions to set and get the exception handler
  - firewall-config: New and enhanced UI to handle lockdown and rich rules
  - zone's immutable attribute is redundant
  - Do not allow to set settings in config for immutable zones.
  - Ignore deprecated 'immutable' attribute in zone files.
  - Eviscerate 'immutable' completely.
  - FirewallDirect.query_rule(): fix it
  - permanent direct: activate firewall.core.io.direct:Direct reader
  - core/io/*: simplify getting of character data
  - FirewallDirect.set_config(): allow reloading


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.5-1
changelog:
  - Only use one PK action for configuration (RHBZ#994729)
  - firewall-cmd: indicate non-zero exit code with red color
  - rich-rule: enable to have log without prefix & log_level & limit
  - log-level warn/err -> warning/error (RHBZ#1009436)
  - Use policy DROP while reloading, do not reset policy in restart twice
  - Add _direct chains to all table and chain combinations
  - documentation improvements
  - New firewalld.direct(5) man page docbook source
  - tests/firewall-cmd_test.sh: make rich language tests work
  - Rich_Rule._import_from_string(): improve error messages (RHBZ#994150)
  - direct.passthrough wasn't always matching out_signature (RHBZ#967800)
  - firewall-config: twist ICMP Type IP address family logic.
  - firewall-config: port-forwarding/masquerading dialog (RHBZ#993658)
  - firewall-offline-cmd: New --remove-service=<service> option (BZ#969106)
  - firewall-config: Options->Lockdown was not changing permanent.
  - firewall-config: edit line on doubleclick (RHBZ#993572)
  - firewall-config: System Default Zone -> Default Zone (RHBZ#993811)
  - New direct D-Bus interface, persistent direct rule handling, enabled passthough
  - src/firewall-cmd: Fixed help output to use more visual parameters
  - src/firewall-cmd: New usage output, no redirection to man page anymore
  - src/firewall/core/rich.py: Fixed forwad port destinations
  - src/firewall-offline-cmd: Early enable/disable handling now with mask/unmask
  - doc/xml/firewalld.zone.xml: Added more information about masquerade use
  - Prefix to log message is optional (RHBZ#998079)
  - firewall-cmd: fix --permanent --change-interface (RHBZ#997974)
  - Sort zones/interfaces/service/icmptypes on output.
  - wbem-https service (RHBZ#996668)
  - applet&config: add support for KDE NetworkManager connection editor
  - firewall/core/fw_config.py: New method update_lockdown_whitelist
  - Added missing file watcher for lockdown whitelist in config D-Bus interface
  - firewall/core/watcher: New add_watch_file for lockdown-whitelist and direct
  - Make use of IPv6 NAT conditional, based on kernel number (RHBZ#967376)


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.6-1
changelog:
  - firewalld.richlanguage.xml: correct log levels (RHBZ#993740)
  - firewall-config: Make sure that all zone settings are updated properly on firewalld restart
  - Rich_Limit: Allow long representation for duration (RHBZ#994103
  - firewall-config: Show "Changes applied." after changes (RHBZ#993643)
  - Use own connection dialog to change zones for NM connections
  - Rename service cluster-suite to high-availability (RHBZ#885257)
  - Permanent direct support for firewall-config and firewall-cmd
  - Try to avoid file descriptor leaking (RHBZ#951900)
  - New functions to split and join args properly (honoring quotes)
  - firewall-cmd(1): 2 simple examples
  - Better IPv6 NAT checking.
  - Ship firewalld.direct(5).


author: Jiri Popelka <jpopelka@redhat.com> - 0.3.6.2-1
changelog:
  - firewall-offline-cmd: --forward-port 'toaddr' is optional (RHBZ#1014958)
  - firewall-cmd: fix variable name (RHBZ#1015011)


author: Brian C. Lane <bcl@redhat.com> 18.2-1
changelog:
  - Fix traceback when /etc/sysconfig/i18n doesn't exist (#849967)
    (vpodzime@redhat.com)
  - Don't crash firstboot with python-meh's Gtk3 UI (#849118)
    (vpodzime@redhat.com)


author: Martin Sivak <msivak@redhat.com> 18.3-1
changelog:
  - patch systemd service to refer to display-manager.service
    not prefdm.service (awilliam@redhat.com)
  - Make the created user administrator by default (#856194)


author: Martin Sivak <msivak@redhat.com> 18.4-1
changelog:
  - Scriptlets replaced with new systemd macros (#850112) (vpavlin@redhat.com)
  - When creating first user in system with no root, force the user to be admin
    (#856194) (msivak@redhat.com)


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 5.44.1.15-1
changelog:
  - Update to 5.44.1.15 from upstream CVS
    Resolves: #528654, Resolves: #501820
  - Remove config.sub (no longer needed), remove unused patches (few are
    upstream now, few are pointless with new version), comment patches
  - Fix unbuffer to return exit code of ubuffered program
    Resolves: #547686
  - Fix Tk initialization
    Resolves: #456738


author: Stephen Warren <s-t-rhbugzilla@wwwdotorg.org> - 2002_04_11-5
changelog:
  - Updates after reading packaging guide-lines more thoroughly:
  - Make license version more explicit
  - Add generate-tarball.sh, and associated comments
  - Added BuildRequires on kernel-headers
  - Added COPYING as a doc
  - Use dollar v.s. percent macros more consitently


author: Stephen Warren <s-t-rhbugzilla@wwwdotorg.org> - 2002_04_11-6
changelog:
  - Rework the spec file formatting to match templates from rpmdev
  - Be explicit about file attributes, just in case


author: Brian Pepple <bpepple@fedoraproject.org> - 0.1.1-2
changelog:
  - Appended isa macro to name in devel subpackage.
  - Add obsolete/provide to devel subpackage.
  - Correct package origin url.


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 1.6.6-5
changelog:
  - Unbundle libraries
  - Add dependency on xpp3
  - Include NOTICE in javadoc package
  - Resolves #817581


author: Ray Strode <rstrode@redhat.com> 1:3.8.1.1-5
changelog:
  - Fix permissions on /run/gdm
    Resolves: #fudge
    (http://lists.fedoraproject.org/pipermail/devel/2013-May/182906.html)


author: Akira TAGOH <tagoh@redhat.com> - 0.1.4-1
changelog:
  - New upstream release.
    - Fix file writing issue when the classification filter is turned off.
      (#886330)


author: Marek Grac <mgrac@redhat.com> - 4.0.2-3
changelog:
  - fence_bladecenter: Fix telnet login failure
  - fence_brocade: Rewrite to fencing library
  - fencing_snmp: Fix 'KeyError --a'
  - fence_scsi: Fix XML metadata
  - fence_scsi: Add a documentation of "delay"
  - fence_ilo2: Unable to login when password contains "


author: Marek Grac <mgrac@redhat.com> - 4.0.2-4
changelog:
  - fence_vmware_soap: Disable cache in SUDS library to resolve SELinux problems
    Resolves: rhbz#1022528
  - fencing: Add information that operation 'unfence' should be run automatically after start of the cluster
    Resolves: rhbz#1012994
  - Aligned to upstream 4.0.4


author: Marek Grac <mgrac@redhat.com> - 4.0.2-5
changelog:
  - fence_vmware_soap: Report if user privileges are not enough for given operation
    Resolves: rhbz#1018780
  - fence_wti: Add support for named groups
    Resolves: rhbz#1022536
  - fence_rsb: Update regular expression to match newer firmware version
    Resolves: rhbz#1022538


author: Marek Grac <mgrac@redhat.com> - 4.0.2-6
changelog:
  - fencing: Ensure validity of XML metadata using Relax NG 
    Resolves: rhbz#1022529
  - fencing: Fix invalid use of options[".."]
    Resolves: rhbz#1022533
  - fence_brocade: Add fence agent
    Resolves: rhbz#1021392


author: Ryan McCabe <rmccabe@redhat.com> - 0.3.0-6
changelog:
  - Add a -w (delay) option.
  - Return failure when attempting to fence a nonexistent domain
  - Improve man pages


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 3.1.8-3
changelog:
  - fix syntax issues #528623, #528625
  - add byacc to BuildRequires
  - follow updated libsigsegv option in configure script


author: Jan Kaluza <jkaluza@redhat.com> - 5.11-5
changelog:
  - fix #847936 - decompress bzip2 properly when using -z param
  - fix #847937 - read magic patterns also from ~/.magic.mgc


author: Jan Kaluza <jkaluza@redhat.com> - 5.11-7
changelog:
  - removed duplicated patterns for backups generated by "dump" tool
  - recognize volume_key escrow packets
  - mention exit code in manpage
  - remove weak msdos patterns


author: Jan Kaluza <jkaluza@redhat.com> - 5.11-11
changelog:
  - fix #1022967 - improve RRD Tool database detection
  - fix #1026852 - exit with 0 exit code when input file does not exist


author: Jiri Popelka <jpopelka@redhat.com> 4.0-30.20120103
changelog:
  - Updated to foomatic-db-4.0-20120103
  - spec modernized
  - Device IDs for:
    - Brother MFC-8840D (#678065)
    - HP LaserJet M1522nf MFP (#745499)
    - Lexmark C453 (#770169)


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-6
changelog:
  - update from the 4.8 branch
    - PRs c++/57825, c++/57901, c++/57981, c++/58022, fortran/57435,
  	fortran/58058, libstdc++/56627, libstdc++/57914, libstdc++/58098,
  	middle-end/58041, rtl-optimization/57459, rtl-optimization/57708,
  	rtl-optimization/57878, sanitizer/56417, target/51784, target/57516,
  	target/58067, target/58132, tree-optimization/57980
  - power8 fusion support (#731884)
  - fix up ABI alignment patch (#947197)
  - fix up SRA with volatile struct accesses (PR tree-optimization/58145)


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-7
changelog:
  - update from the 4.8 branch
    - PRs c++/58083, c++/58119, c++/58190, fortran/57798, fortran/58185,
  	middle-end/56977, middle-end/57381, middle-end/58257, target/56979,
  	target/57865, target/57927, target/58218, tree-optimization/57343,
  	tree-optimization/57396, tree-optimization/57417,
  	tree-optimization/58006, tree-optimization/58164,
  	tree-optimization/58165, tree-optimization/58209
  - fix up x86-64 -mcmodel=large -fpic TLS GD and LD model
    (#994244, PR target/58067)
  - power8 fusion support fixes (#731884, PR target/58160)


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-8
changelog:
  - update from the 4.8 branch
    - PRs c++/58325, libstdc++/58302, libstdc++/58341, middle-end/57656,
  	other/12081, target/57735, tree-optimization/57521,
  	tree-optimization/57685, tree-optimization/58010,
  	tree-optimization/58223, tree-optimization/58228,
  	tree-optimization/58246, tree-optimization/58277,
  	tree-optimization/58364


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-9
changelog:
  - update from the 4.8 branch
    - PRs c++/58273, libstdc++/58415, middle-end/58377, rtl-optimization/58365,
  	target/58314, target/58361, target/58382, tree-optimization/58385
  - add arm_neon.h on aarch64 (#1007490)


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-10
changelog:
  - update from the 4.8 branch
    - PRs ada/58264, c++/58457, c++/58458, libstdc++/58358,
  	tree-optimization/58088
  - on RHEL7, configure on ppc/ppc64 with default -mcpu=power7,
    on s390/s390x with default -march=z10 -mtune=zEC12 and
    on i?86 default to -march=x86-64 -mtune=generic (#805157)
  - on Fedora 20+ and RHEL7 default to -fdiagnostics-color=auto
    rather than -fdiagnostics-color=never, if GCC_COLORS isn't
    in the environment; to turn it off by default, set GCC_COLORS=
    in the environment


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-11
changelog:
  - update from the 4.8 branch
    - PRs c++/58535, libstdc++/58437, libstdc++/58569, middle-end/56791,
  	middle-end/58463, middle-end/58564, target/58330,
  	tree-optimization/56716
    - fix s390x z10+ chunkification (#1012870, PR target/58574)
  - disable ppc{,64} -mvsx-timode by default (#1014053, PR target/58587)


author: Jakub Jelinek <jakub@redhat.com> 4.8.1-12
changelog:
  - update from the 4.8 branch
    - PRs c++/58568, fortran/55469, fortran/57697, fortran/58469,
  	libstdc++/57465, libstdc++/57641, libstdc++/58659, target/58460,
  	tree-optimization/58539
    - fix asm goto handling (#1017704, PR middle-end/58670)


author: Jakub Jelinek <jakub@redhat.com> 4.8.2-2
changelog:
  - update from the 4.8 branch
    - PRs c++/58596, libstdc++/58800
  - power8 TImode fix (#1014053, PR target/58673)


author: Jakub Jelinek <jakub@redhat.com> 4.8.2-3
changelog:
  - update from the 4.8 branch
    - PRs c++/58282, c++/58979, fortran/58355, fortran/58989, libstdc++/58839,
  	libstdc++/58912, libstdc++/58952, lto/57084, middle-end/58789,
  	rtl-optimization/58079, rtl-optimization/58831, rtl/58542,
  	target/58690, target/58779, target/58792, target/58838,
  	tree-optimization/57488, tree-optimization/58805,
  	tree-optimization/58984
  - fix ICEs in get_bit_range (PR middle-end/58970)
  - fix ICEs in RTL loop unswitching (PR rtl-optimization/58997)


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 7.6.1-40.fc19
changelog:
  - Remove --disablerepo='*' from BZ 554152 as it conflicts with BZ 981154.
  - [ppc] Support Power8 CPU (IBM, BZ 731875).
  - [rhel5] tps-srpmtest does not set %{rhel} (BZ 1002198, Miroslav Franc).


author: Sergio Durigan Junior <sergiodj@redhat.com> - 7.6.1-42.fc19
changelog:
  - Fix the case when GDB leaks memory because value_struct_elt does not call
    check_typedef.  (Doug Evans, BZ 15695, filed as RH BZ 1013453).


author: Jens Petersen <petersen@redhat.com> - 0.18.1.1-13
changelog:
  - base package now provides bundled(gnulib) to make it clear that
    gettext is built with bundled gnulib (#821757)


author: Andrew Price <anprice@redhat.com> - 3.1.5-1
changelog:
  - New upstream release
    Removes mount.gfs2, gfs2_tool, gfs2_quota
  - Remove rawhide_transition.patch - now obsolete
  - Update BuildRequires:
    Change glibc-kernheaders to kernel-headers
    Add bison and flex
  - Provide a valid url for Source0
  - Add fix_build_on_rawhide.patch to fix a circular dep introduced in
    bison 2.6, and a make -j race between libgfs2 and gfs2l


author: Andrew Price <anprice@redhat.com> - 3.1.6-1
changelog:
  - New upstream release
  - Drop 'file' requirement - mkfs.gfs2 now uses libblkid instead
  - Drop 'ncurses' requirement - dependency is added automatically
  - Drop requires chkconfig and initscripts - no longer installs daemons
  - Drop fix_build_on_rawhide.patch - upstream
  - Add build req on libblkid-devel


author: Andrew Price <anprice@redhat.com> - 3.1.6-2
changelog:
  - Don't install gfs2_lockcapture and gfs2_trace
    Resolves: rhbz#987019
  - Run test suite after build (requires check-devel build req)
  - Install both of the READMEs into doc/


author: Andrew Price <anprice@redhat.com> - 3.1.6-3
changelog:
  - fsck.gfs2: Add the ability to detect journal inode indirect block corruption
    Resolves: rhbz#990683
  - gfs2_grow: Don't try to open an empty string
    Resolves: rhbz#991204


author: Tim Waugh <twaugh@redhat.com> 5.50-22
changelog:
  - Further changes from package review (bug #225794):
    - Don't use umask in scriptlet.
    - Don't use 'which' in scriptlet.


author: Nils Philippsen <nils@redhat.com> - 2.0.2-0.2
changelog:
  - don't require gimptool file, but gimp-devel-tools package for building
  - merge review (#225797)
    - don't require /usr/share/gimp/2.0 directory, but specific minimum gimp
      version
    - work around problematic gimpdatadir macro definition if gimptool is not
      available


author: Todd Zullinger <tmz@pobox.com> - 1.8.1.4-2
changelog:
  - Update asciidoc requirements, drop unsupported ASCIIDOC7
  - Define GNU_ROFF to force ASCII apostrophes in manpages (so copy/paste works)
  - Install tcsh completion (requires manual setup by users)
  - Clean up dist conditionals, don't pretend to support EL-4 builds
  - Use prebuilt documentation on EL-5, where asciidoc is too old
  - Respect gitexecdir variable in git-subtree install


author: Kalev Lember <kalevlember@gmail.com> - 3.14.2-2
changelog:
  - Revise the summary for consistency with the parallel installable
    glade2/glade3 packages (#882557)


author: Adam Williamson <awilliam@redhat.com> - 1.5.8-3
changelog:
  - instead of taking flags out in makefile.patch and adding them back
    in add-needed.patch, let's just not take them out...


author: Carlos O'Donell <carlos@redhat.com> - 2.17-32
changelog:
  - The default runtime is now POWER7 with an additional POWER8-tuned
    runtime. No other runtimes are provided by default. (#731833)


author: Carlos O'Donell <carlos@redhat.com> - 2.17-34
changelog:
  - Temporarily generate POWER6 code for the 32-bit POWER7 and POWER8
    runtimes to work around bug 1019549 (#1018072).


author: Carlos O'Donell <carlos@readhat.com> - 2.17-35
changelog:
  - Add support for installing the dynmic loader in an alternate location.
    This is required for AArch64 support (#1023790).


author: Richard Hughes <hughsient@gmail.com> - 3.6.1-2
changelog:
  - Don't crash if the window that invoked the task exits before
    the task starts up.
  - Resolves: #756208


author: Florian Müllner <fmuellner@redhat.com> - 3.6.0-2
changelog:
  - Use gnome-applications.menu instead of applications-gnome.menu,
    in order to be able to use XDG_MENU_PREFIX instead of a downstream
    patch to gnome-shell


author: Amar Tumballi <atumball@redhat.com> - 3.4.0.34rhs-1
changelog:
  - bug fixes for 852140 950314 980778 998832 998914 998943 1000922
    1000996 1001893 1001895 1002022 1002613 1003580 1005460 1005478
    1005553 1006172 1007866 1008173 1009851 1011694 1011905


author: Arumugam Balamurugan <barumuga@redhat.com> - 3.4.0.35rhs-1
changelog:
  - bug fixes for 969461 1000948 1000936 1011694 1013556 1016971 979641
    950314 852140 980778 1006172 1005553 1005478 1007866 998914 981035


author: Arumugam Balamurugan <barumuga@redhat.com> - 3.4.0.36rhs-1
changelog:
  - bug fixes for 1002885 1021808 1007536 1017014 1012216 998786 977544
    1016385 858434 1001895 1012900 980910 1001556


author: Amar Tumballi <atumball@redhat.com> - 3.4.0.37rhs-1
changelog:
  - bug fixes for 1000903 1001895 1012900 1016019 1016019 1019504 1019518
    1019903 1019930 1019954 1020886 1022518 1022582 1022830 1023124 1023124
    1023124 1024496 871015 980910 980910 998793 998943


author: Amar Tumballi <atumball@redhat.com> - 3.4.0.39rhs-1
changelog:
  - fixes the bug 1000948 1002987 1010239 1014002 1022830 1025205 1025392
    1025408 1025476 1025604 1025953 1025954 1025956 1025967


author: Jakub Filak <jfilak@redhat.com> 0.2.8-1
changelog:
  - Try harder when looking for icon and don't cache weak results
  - Make controller more robust against invalid arguments
  - Check return value of the get selection function
  - Require correct version of libreport
  - Return an empty list instead of None from OopsWindow.get_selected()
  - Return an empty list instead of None from get_problems() in case of DBus error
  - Get rid of unnecessary variable from the directory source
  - Add a cmd line argument for selected problem id


author: Jakub Filak <jfilak@redhat.com> 0.2.9-1
changelog:
  - Truncate long texts with ellipsis instead of auto-adjusting of window width
  - Add a popopup menu for list of problems
  - Use executable's basename as an application name instead of the full path
  - Remove invalid problems from GUI tree view list
  - Remove invalid problems from the dbus cache
  - Robustize the processing of newly occurred problems
  - Remove a left-over usage of the window member in OopsApplication
  - Handle reaching inotify max watches better
  - Update translation
  - Don't allow reporting if the problem is not reportable
  - Suggest reporting a bug if it wasn't reported yet
  - Simplify the glade file and add a widget for messages
  - Refactorize the function rendering a problem data
  - A workaround for the bug in remote GtkApplications
  - Allow only a single instance of gnome-abrt
  - Fix bugs in main window in handler of configuration updates
  - Resolves: #922653, #922655, #922647


author: Jakub Filak <jfilak@redhat.com> 0.2.10-1
changelog:
  - Add the report dialog to the menu
  - Add 'Report problem with ABRT' dialog
  - Add VERSION and PACKAGE attributes to gnome_abrt module
  - Rename attribute in errors.InvalidProblem
  - Use IOChannel approach in order to make signal handling synchronous
  - Add all python Requires to BuildRequires because of pylint
  - Replace GNU style make pattern rules by implicit rules
  - Remove left-over RELEASE varible from configure.ac
  - Recover from DBus errors while sending command line
  - Catch more exceptions and handle them correctly
  - Add pylint check and fix problems uncoverend by pylint
  - Filter out empyt strings from splitted cmdline
  - Fix sytanx error
  - Change the label "No oopses" to "No problems detected"
  - Get rid of scrollbar around the text on the bottom of window in default size
  - Fix appearance of scrolled widgets to no longer have white background
  - Remove leftover shebang from non-executable script
  - Resolves: #926010, #926011


author: Jakub Filak <jfilak@redhat.com> 0.2.11-1
changelog:
  - Enable pylint check only on Fedora
  - Fix bogus dates in chagelog
  - Introduce expert mode and show 'Analyze' button in that mode
  - Use last occurrence item for problems sorting
  - Fix broken keyboard shortcuts
  - Fix missing space typo - Martin Milata <mmilata@redhat.com>
  - Compare all DesktopEntry.*() return values to None
  - Display 'component' name instead of 'executable' if desktop file is missing
  - Do not show scrollbar for long links
  - Allow to disable pylint check in configure.ac
  - Move manpage to volume 1 - Chris Lockfort <clockfort@csh.rit.edu>
  - Move gnome_abrt module check to module's Makefile
  - Disable 'Interface not implemented' pylint warning
  - Configure pylint to produce parseable output
  - Resolves: #919838


author: Jakub Filak <jfilak@redhat.com> 0.2.12-1
changelog:
  - Use 'N/A' instead of ??
  - Use package name is neither component nor executable items are available
  - Don't try to select a problem if the list is empty
  - Catch InvalidProblem exception in sort function
  - Handle DBus initialization errors gracefully
  - Show HTML titles of URLs from reported_to element
  - Updated translation
  - Continue in handling of SIGCHLD after the first one is handled
  - Fix two comma splices
  - Fix wrong dialog flag names
  - Resolves: #958974


author: Kalev Lember <kalevlember@gmail.com> - 1:3.7.4-2
changelog:
  - Spec file cleanup
  - Drop the desktop-notification-daemon requires now that the applet is gone
  - Fix the build with gcc 4.8
  - Move the libgnome-bluetooth-applet.so symlink to the -devel package


author: Christophe Fergeau <cfergeau@redhat.com> 3.8.2-3
changelog:
  - Readd ExclusiveArch as Boxes is not really functional on non-x86
    arch even if it can be built. Also, libvirt-daemon-kvm is not
    available on every arch, causing rhbz#962325


author: Adam Jackson <ajax@redhat.com> 3.8.0-2
changelog:
  - gnome-session-3.6.2-swrast.patch: Allow running on the classic software
    renderer.  No effect on arches where we build llvmpipe, but on ppc/s390
    classic swrast is marginally less painful than softpipe.


author: Kalev Lember <kalevlember@gmail.com> - 3.8.1-2
changelog:
  - Use the upstream xsession desktop file
  - Drop the fallback mode authentication agent autostart file


author: Mohamed El Morabity <melmorabity@fedoraproject.org> - 3.8.3-1
changelog:
  - Update to 3.8.3
  - Drop mini-extensions default-min-max and static-workspaces, no longer
    available (see https://bugzilla.gnome.org/show_bug.cgi?id=701717)


author: Florian Müllner <fmuellner@redhat.com> - 3.8.4-10
changelog:
  - Backport support for hasWorkspaces session mode property
    Resolves: #1025444
  - Backport input validation of screenshot/screencast DBus methods
    Resolves: #1022491


author: Florian Müllner <fmuellner@redhat.com> - 3.8.4-11
changelog:
  - Re-add yelp to default favorites - this downstream patch was
    accidentally dropped when rebasing on F19
    Resolves: #958196
  - Fix network icon not updating
    Resolves: #1009867
  - Do not hide on/off switch while connecting to wireless
    Resolves: #908829
  - Fix apps menu not being disabled when open during screen lock
    Resolves: #1027501
  - Be more defensive when enabling/disabling extensions
    Resolves: #1027501
  - Re-enable browser plugin and move it to a subpackage
    Resolves: #972783


author: Rui Matos <rmatos@redhat.com> - 3.8.4-14
changelog:
  - Add a DBus method to load a single extension
    Resolves: rhbz#1028466
  - Add a SESSION_MODE extension type
    Resolves: rhbz#1028462


author: Tomas Mraz <tmraz@redhat.com> 3.1.7-1
changelog:
  - new upstream version, requires rebuild of dependencies
  - this release temporarily includes old compatibility .so


author: David Walluck <dwalluck@redhat.com> 0:1.0.13-3
changelog:
  - fix maven depmap install
  - add compat symlinks for javadoc
  - add depmap entry for urbanophile:java-getopt


author: Hans de Goede <hdegoede@redhat.com> 0.10.31-2
changelog:
  - v4l2src: Cherry pick some patches from upstream hopefully fixing #815581
  - v4l2src: Deal with uvc cams which report duplicate framerates, such as
    on the Thinkpad x121e (rhbz#815134, gnome#677516)


author: Tim Waugh <twaugh@redhat.com> 5.2.9-5
changelog:
  - Added IEEE 1284 Device IDs for Samsung ML-1450 (bug #844687) and
    Canon ML280 series (bug #848093).


author: Karel Klic <kklic@redhat.com> - 1.4-2
changelog:
  - Removed the dependency on less (rhbz#629580)
  - Removed the BuildRoot tag
  - Removed the %clean section


author: Robin Lee <cheeselee@fedoraproject.org> - 1.4.22-1
changelog:
  - Update to 1.4.22 (CVE-2012-2942, #824544)
  - Use linux2628 build target
  - No separate x86_64 build target for halog
  - halog build honors rpmbuild optflags
  - Specfile cleanup


author: Jan Vcelak <jvcelak@redhat.com> 1.21-9
changelog:
  - older security fixes (#709415, #720060):
    + CVE-2009-5044: insecure temporary file handling in pdfroff
    + CVE-2009-5080: improper handling of failed attempts to create temporary directories in eqn2graph/pic2graph/grap2graph
    + CVE-2009-5081: roff2.pl and groffer.pl use easy-to-guess temporary file names


author: Peter Jones <pjones@redhat.com> - 2.00-22.3
changelog:
  - Use linux16 when appropriate:
    Resolves: rhbz#880840
  - Enable pager by default:
    Resolves: rhbz#985860
  - Don't ask the user to hit keys that won't work.
    Resolves: rhbz#987443
  - Sign grub2 during builds
    Resolves: rhbz#1017855


author: Peter Jones <pjones@redhat.com> - 8.23-1
changelog:
  - Update to 8.23
  - Fix empty root device in case of an empty /etc/fstab (lemenkov)
  - General refactoring and cleanup (harald)
  - Don't clean up modules.* so aggressively (harald)


author: Peter Jones <pjones@redhat.com> - 8.25-1
changelog:
  - Error instead of segfaulting if we can't find any working config
    Resolves: rhbz#912873
    Resolves: rhbz#751608


author: Matthias Clasen <mclasen@redhat.com> - 3.8.4-1
changelog:
  - Update to 3.8.4
  - This update includes a considerable number of bug fixes,
    including fixes for filechooser behavior, a crash fix for
    gnome-shell, appearance fixes for menu items, etc.


author: Matthias Clasen <mclasen@redhat.com> - 3.8.4-5
changelog:
  - Avoid losing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches  -m32 -mcpu=power7 -mtune=power7
  - Related: #881175


author: Michael Schwendt <mschwendt@fedoraproject.org> - 0.10.35-2
changelog:
  - Remove gtk-doc dependency from -devel-docs package and 
    own the two gtk-doc directories instead (#604365).


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.10-1
changelog:
  - refuse to truncate output below half the size of the hash length, or 80
    bits, whichever is higher, in case we get used in a situation where
    not doing so would make us vulnerable to CVE-2009-0217, in which an
    attacker manages to convince a party doing verification to truncate
    both the just-computed value and the value to be checked before
    comparing them, as comparing just 1 bit would make detecting forgeries
    close to impossible


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.11-1
changelog:
  - error out when we previously skipped a check entry because the value to be
    checked is the wrong size
  - fix estimation of the expected length for truncated values


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.12-1
changelog:
  - fix regression of #512275 -- we looked for prelink, but didn't record
    its location properly (#559458)


author: Tim Waugh <twaugh@redhat.com> - 3.13.4-2
changelog:
  - Fixed changelog dates.
  - Device ID for HP LaserJet P1005 (bug #950776).
  - mark cron job file as config(noreplace)


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 4.2.1-2
changelog:
  - Install NOTICE.txt file
  - Fix javadir directory ownership
  - Fix directory permissions
  - Preserve timestamps
  - Replace add_to_maven_depmap with add_maven_depmap


author: Jan Kaluza <jkaluza@redhat.com> - 2.4.4-12
changelog:
  - mod_unique_id: replace use of hostname + pid with PRNG output (#976666)
  - apxs: mention -p option in manpage


author: Takao Fujiwara <tfujiwar@redhat.com> - 1.5.2-1
changelog:
  - Bumped to 1.5.2
  - Created noarch packages for python files due to .pyc and .pyo.
  - Added man pages.


author: Takao Fujiwara <tfujiwar@redhat.com> - 1.5.2-4
changelog:
  - Updated ibus-HEAD.patch for upstream.
  - Added ibus-xx-1.5.2.patch until 1.5.3 will be released.
  - Added ibus-xx-ctrl-space.patch for back compatible triggers.


author: Ding-Yi Chen <dchen at redhat.com> - 1.3.9.2-1
changelog:
  - Fixed Bug 652909
  - Added back a Changlog item that mention Nils Philippsen's change.
  - Apply Jim Huang's patch for zh_TW.po


author: Ding-Yi Chen <dchen at redhat.com> - 1.3.10-1
changelog:
  - Fixed Bug 726335 (Google issue 1281)- [abrt] ibus-chewing-1.3.9.2-3.fc15: g_atomic_int_get:
    Process /usr/libexec/ibus-engine-chewing was killed by signal 11 (SIGSEGV) using patch from Scott Tsai
  - Fixed Bug 727018 - ibus compose file needs a symbol tag for gnome-shell
  - Fixed characters duplication problem (Google issue 1245, GitHub ibus-chewing issue 2)
  - Fixed KP-Enter not been able to commit preedit buffer. (Google issue 1303, GitHub ibus-chewing issue 4)
  - Depends on cmake-fedora now.
  - Fixed issue 1274, which is addressed by yusake's comments on d9009bf.
  - Add compile flag for GNOME3.
  - Add command line option: showFlags
  - ibus-gnome special symbol
  - Thanks Fred Chien's patch against that candidate window cannot be closed
    with escape key since selected tone.
  - Thanks Fourdollar's patch for Fix plain zhuyin with space as selection problem.
  - Remove support for ibus-1.2 and prior.


author: Ding-Yi Chen <dchen at redhat.com> - 1.4.0-1
changelog:
  - Merge pull request #13 from hiroshiyui to Fix wrong data type conversion
  - Fixed: Google Issue 1079: Use shift key to switch to English mode in ibus-chewing
    Also list as GitHub pull request #17
  - Fixed: Google Issue 1089: Ibus-chewing cause window flicker when compiz enabled
  - Fixed: Google Issue 1329, Github Issue 3: Merge with buganini at gmail.com
  - Fixed: Google Issue 1351: ibus-chewing 1.3.10 mistakenly send uncommitted charactor.
  - Fixed: Google Issue 1374: ibus-chewing: cannot save the preference with gnomeshell
  - Fixed: Google Issue 1427: ibus-chewing-1.3.10 is not compatible with ibus-1.4.0 and higher
    Also list as GitHub pull request #16
  - Fixed: GitHub Issue 5: Word missing when with libchewing-0.3.3 and  ibus-chewing 1.3.10
    Also list as GitHub pull request #15
  - Fixed: Launchpad bug: 1014456 bus-chewing deletes characters if too many of them are entered
    Also list as GitHub pull request #19


author: Ding-Yi Chen <dchen at redhat.com> - 1.4.2-1
changelog:
  - Fixed GitHub issue #7: highlighted text be cut after switch back to pure ibus
    by merging pull request #24 from buganini
  - Fixed GitHub issue #20: Shift key will send duplicated strings
    by merging pull request #22 from buganini
  - Fixed GitHub issue #21: somethings wrong with cmake
  - Fixed GitHub issue #25: Weird symbol when input with somethings highlighted
    by merging pull request #26 from buganini
  - Fixed GitHub issue #27: Local path committed into tree
  - Fixed: Bug 713033 -  [zh_TW] ibus-chewing problem
  - Fixed: Bug 745371 -  ibus-chewing: mode confusion In Temporary English mode and Chinese mode later on
  - Fixed: Google Issue 1172: [ibus-chewing] move elf file to standard directory.
  - Fixed: Google Issue 1426: ibus-chewing-1.3.10 installs directory /gconf to root filesystem
  - Fixed: Google Issue 1428: ibus-chewing-1.3.10 fails to save it's settings
  - Fixed: Google Issue 1481: Some characters are missing when a long string in preedit buffer.
  - Fixed: Google Issue 1490: Cannot change INSTAL prefix for ibus-chewing-1.4.0


author: Daiki Ueno <dueno@redhat.com> - 1.4.1-6
changelog:
  - Add ibus-hangul-engine-name.patch
  - Update ibus-hangul-setup-gi.patch
  - Fix bug 870318 - Change of “Automatic reordering” setup option
    cannot be applied in ibus-hangul setup (thanks Mike FABIAN for the patch)


author: Daiki Ueno <dueno@redhat.com> - 1.4.1-7
changelog:
  - Re-add ibus-hangul-HEAD.patch based on recent upstream change
  - Apply ibus-hangul-add-hangul-hotkey.patch only for F-15 and F-16


author: Daiki Ueno <dueno@redhat.com> - 1.3.4-3
changelog:
  - Add ibus-m17n-fix-mtext-config.patch
  - Fix bug 836397 - [abrt] ibus-m17n-1.3.3-11.fc17: mtext_data: Process
    /usr/libexec/ibus-setup-m17n was killed by signal 11 (SIGSEGV)


author: Mike FABIAN <mfabian@redhat.com> - 1.3.9.20110827-4
changelog:
  - Resolves: #845798
  - add ibus-table-1.3.9.20110827-add-some-keys-for-translit.patch (from Yuwei YU, upstream)
  - add ibus-table-1.3.9.20110827-enable-non-ascii.patch  (from Yuwei YU, upstream)
  - add ibus-table-1.3.9.20110827-uppercase-umlauts.patch to allow uppercase as well in translit


author: Mike FABIAN <mfabian@redhat.com> - 1.4.99.20120907-1
changelog:
  - Relates: #855250
  - see comment#1 in #855250
  - update to latest upstream 1.4.99.20120907 from Caius 'kaio' Chance's repository
  - remove ibus-table-1.3.9.20110827-add-some-keys-for-translit.patch (included upstream)
  - remove ibus-table-1.3.9.20110827-enable-non-ascii.patch (included upstream)


author: Mike FABIAN <mfabian@redhat.com> - 1.4.99.20120907-2
changelog:
  - Resolves: #856320
  - Improve check whether a phrase is simplified or traditional Chinese
    The improvement is to ignore all non-Han characters when
    doing the check.
    This is to avoid classifying a simplified Chinese string as
    traditional just because it happens to include some non-Chinese
    characters, for example box drawing characters, which cannot be
    converted to gb2312 but happen to be convertible to big5hkscs.
    This fixes the problem in the emoji-table input method that most
    phrases cannot be input at all.


author: Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101206-1
changelog:
  - New tables which was not include in original:
    + array30, array30-big, wubi-haifeng
  - Table removed from original version because of license issues:
    + zhengma, ziranma
  - Add package review ID
  - Add build tag for el6


author: Mike FABIAN <mfabian@redhat.com> - 0.0.32-1
changelog:
  - Update to 0.0.32 upstream version
  - Resolves: rhbz#969847 - Editing in the preëdit of ibus-typing-booster behaves weird, especially with transliteration
  - Fix behaviour of Control+Number
  - When committing by typing TAB, update frequency data in user database
  - When committing by tying RETURN or ENTER, update frequency data in user database
  - Do not try to match very long words in the hunspell dictionaries
  - Rewrite the code for moving and editing within the preëdit (rhbz#969847)
  - Fix encoding error when changing values with the setup tool
  - Add ko_KR.conf and ko_KR.svg
  - Use normalization forms NFD or NFKD internally and NFC externally
  - Remove old way of using libtranslit via ctypes
  - Get rid of “freq” column in databases
  - Remove too simpleminded auto-capitalization


author: Mike FABIAN <mfabian@redhat.com> - 1.0.0-1
changelog:
  - Update to 1.0.0 upstream version
  - Remove mudb and use “Write-Ahead Logging”
  - Introduce an environment variable IBUS_TYPING_BOOSTER_DEBUG_LEVEL for debugging
  - Speed up converting an old database to the current format
  - Make prediction more intelligent by using context of up to 2 previous words
  - Automatically remove whitespace between the last word and a punctuation character ending a sentence


author: Eike Rathke <erack@redhat.com> - 50.1.2-1
changelog:
  - Update to 50.1.2
  - Resolves: rhbz#856594 to-do add --disable-renaming on next soname bump
  - removed upstream applied icu.9283.regexcmp.crash.patch


author: Rex Dieter <rdieter@fedoraproject.org> - 1.0.2-2
changelog:
  - libIlmThread missing -pthread linkage (#661115)
  - %install: INSTALL="install -p"
  - -devel: tighten dep using %?_isa


author: Jay Fenlason <fenlason@redhat.com> 1.5.3-3.el6
changelog:
  - Correct the perldir macro for rhel-6's perl.
  - Remove the unrecognized --with-node-name-map configure option.
  - reorganize the files section to use fewer globs, so that it's less likely
    to pick up files inappropriately.


author: Jay Fenlason <fenlason@redhat.com> - 1.13-2
changelog:
  - Use macros for lib and include directories, and include dist tag in
    release field.
  - Corrected License field.
  - Corrected Requires lines for libuuid.
  - Add Exclusive-arch x86_64
    Related: rhbz570274


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.3.8-1
changelog:
  - Read /etc/os-release to get product title (#1000426) (vpodzime)
  - Don't let product_title() return None (vpodzime)
  - Apply the timezone and NTP configuration (#985566) (hdegoede)
  - Make handling translations easier (vpodzime)
  - Make translations work (vpodzime)
  - Prevent getty on various services killing us (#979174) (vpodzime)
  - Initialize network logging for the network spoke (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.3.9.1-1
changelog:
  - Yet another serial console in ARMs (vpodzime)
    Related: rhbz#1000409
  - Fix the base mask of initial_setup gui submodules (vpodzime)
    Related: rhbz#1000409
  - Specify and use environment of the main hub (vpodzime)
    Related: rhbz#1000409
  - EULA agreement spoke (#1000409) (vpodzime)
  - Require new version of anaconda with eula command support (vpodzime)
    Related: rhbz#1000409


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.3.9.2-1
changelog:
  - Put license view into a scrolled window (#1015005) (vpodzime)
  - Clear the default text before inserting the EULA (dshea)
    Related: rhbz#1015005


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.3.9.3-1
changelog:
  - Fix how spokes are collected for the I-S main hub
    Related: rhbz#1000409
  - Add TUI Eula spoke
    Related: rhbz#1000409
  - Reboot the system if EULA is not agreed
    Related: rhbz#1000409


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.3.9.4-1
changelog:
  - Read licence files as utf-8 encoded (vpodzime)
    Resolves: rhbz#1023052
  - Inform user that the system may be rebooted (vpodzime)
    Resolves: rhbz#1022040


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.46-1
changelog:
  - add /var/lib/NetworkManager
  - add ipip6 tunneling support (#928232, raorn@raorn.name)
  - bonding: set master up before slaves
  - set net.ipv6.conf.SYSCTLDEVICE.autoconf in ifup-ipv6
  - ifdown: don't call nmcli on interface that is alread down
  - remove some defaults from sysctl.conf (move to systemd)
  - call flush addresses with scope global
  - service: action should not be empty when calling legacy-actions (#947817)
  - ifup-eth: ignore arping errors (#928379)
  - replace tunctl with ip tuntap (#947875)
  - reload sysctl settings for vlans on ifup
  - try dhcpv6 after v4 failed (#846618)


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.47-1
changelog:
  - network-functions: to determine state of nscd check socket not lock (#960779)
  - sysconfig.txt advised saslauthd -a instad of -v
  - update translations from transifex
  - drop translation for other initscripts
  - tweak ifup/ifdown usage and man page (#961917)
  - ctrl-alt-delete.target is provided by systemd package
  - remove some defaults from arch specific sysctl.conf
  - readonly-root: remount rpc_pipefs if readonly-root is used
  - service: mention legacy actions and systemctl redirection in man page


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.48-1
changelog:
  - man: add systemd man pages to service.8 "see also" section
  - add possibility to set domainname through /etc/sysconfig/network
  - rename_device: don't wait for lock with lower permissions
  - 256term.csh: remove quotes around variable (#979796)
  - drop useless variables from /etc/sysconfig/init
  - readonly-root: rpcidmapd restart is not needed anymore
  - ifup-eth: print error only if arping is really called (#974603)
  - readonly-root: Add /var/lib/samba to rwtab


author: Lukáš Nykrýn <lnykryn@redhat.com> - 9.49.2-1
changelog:
  - symlink /etc/sysctl.conf -> /etc/sysctl.d/
  - man: only action specified in LSB are redirected to systemd
  - service: filter actions that are not supported by systemctl in service (#947823)
  - install_bonding_driver: drop check for existing device (#991335)
  - consider IPV6INIT undefined as YES
  - don't care about network filesystems


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.3-1
changelog:
  - update functions who call nmcli (#1002958)
  - create /var/log/dmesg for compatibility reasons (#854002)


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.4-1
changelog:
  - ifdown: fix typo in nmcli call (#1006222)
  - ipcalc: support RFC3021 (#997271)
  - enable 'network' service at boot time for interfaces not supported by NetworkManager (#1003936)


author: Lukas Nykryn <lnykryn@redhat.com> - 9.49.7-1
changelog:
  - readonly-root: Add /var/log/audit/audit.log to rwtab (#1026815)
  - brandot: fix posssible segfault (#1024922)


author: Parag Nemade <pnemade AT redhat DOT com>- 1.3.13-4
changelog:
  - Resolves:rh#799568 - iok crashed while selecting 'xkb-Malayalam (enhanced Inscript with Rupee Sign)'


author: Martin Kosek <mkosek@redhat.com> - 3.3.2-1
changelog:
  - Update to upstream 3.3.2 (#991064)
  - Add delegation info to MS-PAC (#915799)
  - Warn about incompatibility with AD when IPA realm and domain
    differs (#1009044)
  - Allow PKCS#12 files with empty password in install tools (#1002639)
  - Privilege "SELinux User Map Administrators" did not list
    permissions (#997085)
  - SSH key upload broken when client joins an older server (#1009024)


author: Martin Kosek <mkosek@redhat.com> - 3.3.2-2
changelog:
  - Deprecate --serial-autoincrement option (#1016645)
  - CA installation always failed on replica (#1005446)
  - Re-initializing a winsync connection exited with error (#994980)


author: Martin Kosek <mkosek@redhat.com> - 3.3.2-4
changelog:
  - Server install failure during client enrollment shouldn't
    roll back (#1023086)
  - nsds5ReplicaStripAttrs are not set on agreements (#1023085)
  - ipa-server conflicts with mod_ssl (#1018172)


author: Martin Kosek <mkosek@redhat.com> - 3.3.2-5
changelog:
  - Temporarily move ipa-backup and ipa-restore functionality
    back to make them available in public Beta (#1003933)


author: Martin Kosek <mkosek@redhat.com> - 3.3.3-3
changelog:
  - Installer did not detect different server and IPA domain (#1026845)
  - Allow kernel keyring CCACHE when supported (#1026861)


author: Martin Kosek <mkosek@redhat.com> - 3.3.3-5
changelog:
  - Trust add tries to add same value of --base-id for sub domain,
    causing an error (#1033068)
  - Improved error reporting for adding trust case (#1029856)


author: Ales Ledvinka <aledvink@redhat.com> 1.8.12-13
changelog:
  - fixed argument parsing leaks
  - ask user for password only once and do so only when interactive password
    is the chosen password method.


author: Petr Šabata <contyk@redhat.com> - 3.10.0-1
changelog:
  - 3.10.0 bump
  - Drop the SHAREDIR patch and revert to upstream ways (#966445)
  - Fix an XFRM regression with FORTIFY_SOURCE


author: Mathieu Bridon <bochecha@fedoraproject.org> - 6.11-1
changelog:
  - New upstream release.
  - Removed our patch, it has been integrated upstream. As such, we also don't
    need to re-run autoreconf any more.


author: Thomas Woerner <twoerner@redhat.com> 1.4.15-1
changelog:
  - new version 1.4.15
    - extensions: add HMARK target
    - iptables-restore: fix parameter parsing (shows up with gcc-4.7)
    - iptables-restore: move code to add_param_to_argv, cleanup (fix gcc-4.7)
    - libxtables: add xtables_ip[6]mask_to_cidr
    - libxt_devgroup: add man page snippet
    - libxt_hashlimit: add support for byte-based operation
    - libxt_recent: add --mask netmask
    - libxt_recent: remove unused variable
    - libxt_HMARK: correct a number of errors introduced by Pablo's rework
    - libxt_HMARK: fix ct case example
    - libxt_HMARK: fix output of iptables -L
    - Revert "iptables-restore: move code to add_param_to_argv, cleanup (fix gcc-4.7)"


author: Thomas Woerner <twoerner@redhat.com> 1.4.16.2-1
changelog:
  - new version 1.4.16.2
    - build: support for automake-1.12
    - build: separate AC variable replacements from xtables.h
    - build: have `make clean` remove dep files too
    - doc: grammatical updates to libxt_SET
    - doc: clean up interpunction in state list for xt_conntrack
    - doc: deduplicate extension descriptions into a new manpage
    - doc: trim "state" manpage and reference conntrack instead
    - doc: have NOTRACK manpage point to CT instead
    - doc: mention iptables-apply in the SEE ALSO sections
    - extensions: libxt_addrtype: fix type in help message
    - include: add missing linux/netfilter_ipv4/ip_queue.h
    - iptables: fix wrong error messages
    - iptables: support for match aliases
    - iptables: support for target aliases
    - iptables-restore: warn about -t in rule lines
    - ip[6]tables-restore: cleanup to reduce one level of indentation
    - libip6t_frag: match any frag id by default
    - libxtables: consolidate preference logic
    - libxt_devgroup: consolidate devgroup specification parsing
    - libxt_devgroup: guard against negative numbers
    - libxt_LED: guard against negative numbers
    - libxt_NOTRACK: replace as an alias to CT --notrack
    - libxt_state: replace as an alias to xt_conntrack
    - libxt_tcp: print space before, not after "flags:"
    - libxt_u32: do bounds checking for @'s operands
    - libxt_*limit: avoid division by zero
    - Merge branch 'master' of git://git.inai.de/iptables
    - Merge remote-tracking branch 'nf/stable'
    - New set match revision with --return-nomatch flag support
  - dropped fixrestore patch, upstream


author: Thomas Woerner <twoerner@redhat.com> 1.4.16.2-2
changelog:
  - new sub package services providing the systemd services (RHBZ#862922)
  - new sub package utils: provides nfnl_osf and the pf.os database
  - using /usr/libexec/iptables as script path for the original init scripts
  - added service iptables save funcitonality using the new way provided by 
    initscripts 9.37.1 (RHBZ#748134)
  - added virtual provide for libxtables.so.7


author: Thomas Woerner <twoerner@redhat.com> 1.4.16.2-4
changelog:
  - fixed missing services for update of pre F-18 installations (rhbz#867960)
    - provide and obsolete old main package in services sub package
    - provide and obsolete old ipv6 sub package (pre F-17) in services sub package


author: Ville Skyttä <ville.skytta@iki.fi> - 1.4.16.2-6
changelog:
  - Own unowned -services libexec dirs (#894464, Michael Scherer).
  - Fix -services unit file permissions (#732936, Michal Schmidt).


author: Thomas Woerner <twoerner@redhat.com> 1.4.18-1
changelog:
  - new version 1.4.18 
    - lots of documentation changes
    - Introduce match/target aliases
    - Add the "state" alias to the "conntrack" match
    - iptables: remove unused leftover definitions
    - libxtables: add xtables_rule_matches_free
    - libxtables: add xtables_print_num
    - extensions: libip6t_DNPT: fix wording in DNPT target
    - extension: libip6t_DNAT: allow port DNAT without address
    - extensions: libip6t_DNAT: set IPv6 DNAT --to-destination
    - extensions: S/DNPT: add missing save function
  - changes of 1.4.17:
    - libxt_time: add support to ignore day transition
    - Convert the NAT targets to use the kernel supplied nf_nat.h header
    - extensions: add IPv6 MASQUERADE extension
    - extensions: add IPv6 SNAT extension
    - extensions: add IPv6 DNAT target
    - extensions: add IPv6 REDIRECT extension
    - extensions: add IPv6 NETMAP extension
    - extensions: add NPT extension
    - extensions: libxt_statistic: Fix save output


author: Thomas Woerner <twoerner@redhat.com> 1.4.19.1-1
changelog:
  - new version 1.4.19.1
    - libxt_NFQUEUE: fix bypass option documentation
    - extensions: add connlabel match
    - extensions: add connlabel match
    - ip[6]tables: show --protocol instead of --proto in usage
    - libxt_recent: Fix missing space in manpage for --mask option
    - extensions: libxt_multiport: Update manpage to list valid protocols
    - utils: nfnl_osf: use the right nfnetlink lib
    - libip6t_NETMAP: Use xtables_ip6mask_to_cidr and get rid of libip6tc dependency
    - Revert "build: resolve link failure for ip6t_NETMAP"
    - libxt_osf: fix missing --ttl and --log in save output
    - libxt_osf: fix bad location for location in --genre
    - libip6t_SNPT: add manpage
    - libip6t_DNPT: add manpage
    - utils: updates .gitignore to include nfbpf_compile
    - extensions: libxt_bpf: clarify --bytecode argument
    - libxtables: fix parsing of dotted network mask format
    - build: bump version to 1.4.19
    - libxt_conntrack: fix state match alias state parsing
    - extensions: add libxt_bpf extension
    - utils: nfbpf_compile
    - doc: mention SNAT in INPUT chain since kernel 2.6.36
  - fixed changelog date weekdays where needed


author: Matthias Saou <http://freshrpms.net/> 1.26-2
changelog:
  - Backport the init script from RHEL6, which contains lots of changes to make
    it behave simlarly to the iptables init script (#593276).


author: Daniel P. Berrange <berrange@redhat.com> - 20120319-2.git0b2c788
changelog:
  - Remove BuildRoot & rm -rf of it in install/clean sections
  - Remove defattr in file section
  - Switch to use global, instead of define for macros
  - Add note about Patch1 not going upstream
  - Split BRs across lines for easier readability


author: Petr Holasek <pholasek@redhat.com> - 2:1.0.3-5
changelog:
  - Make irqbalance scan for new irqs when it detects new irqs (bz832815)
  - Fixes SIGFPE crash for some banning configuration (bz849792)
  - Fixes affinity_hint values processing (bz832815)
  - Adds banirq and bansript options (bz837049)
  - imake isn't needed for building any more (bz844359)
  - Fixes clogging of syslog (bz837646)
  - Added IRQBALANCE_ARGS variable for passing arguments via systemd(bz837048)
  - Fixes --hint-policy=subset behavior (bz844381)


author: Chris Leech <cleech@redhat.com> - 6.2.0.873-7
changelog:
  - Use the systemd tmpfiles service to recreate lockfiles in /var/lock
  - 955167 build as a position independent executable
  - 894576 fix order of setuid/setgid and drop additional groups


author: Chris Leech <cleech@redhat.com> - 6.2.0.873-10
changelog:
  - sync with upstream git, minor context fixes after rebase of out-of-tree patches
  - iscsiuio is merged upstream, remove old source archive and patches
  - spec cleanups to fix rpmlint issues


author: Chris Leech <cleech@redhat.com> - 6.2.0.873-11
changelog:
  - iscsi boot related fixes
    make sure iscsid gets started if there are any boot sessions running
    add reload target to fix double session problem when restarting from NM
    don't rely on session list passed from initrd, never got fully implemented
    remove patches related to running iscsid from initrd, possible to revisit later


author: Radek Vykydal <rvykydal@redhat.com> - 1:1.0.6-1
changelog:
  - Add abort check feature (#555107) (dpierce, rvykydal)
    Changes prototype of exported checkMediaFile function.
  - Fix exit value of checkisomd5 (rvykydal)
  - Remove output to stderr from library (#576251) (bcl)
  - Use separate return value for image not found (#578160) (bcl)


author: Jiri Vanek <javenk@redhat.com> 1:1.6.0.0-57.1.10
changelog:
  - removed BuildRequires: libstdc++-static as it is fixed upstream
  - added information for icedtea6.1.10 fixlist: http://blog.fuseyism.com/index.php/2011/04/04/icedtea6-1101-released/


author: Deepak Bhole <dbhole@redhat.com> 1:1.6.0.0-57.1.10.1
changelog:
  - Updated to IcedTea6 1.10.1
  - Added --disable-bootstrap switch for non-bootstrap builds
  - Updated hotspot tarball to hs20-b11 (f0f676c5a2c6)
  - Removed java-1.6.0-openjdk-fix-RA.patch (in icedTea6 1.10.1)


author: Jiri Vanek <jvanek@redhat.com> - 1:1.6.0.0-58.1.10.2
changelog:
  - Resolves: rhbz#709375
  - Bumped to IcedTea6 1.10.2
  - RH706250, S6213702, CVE-2011-0872: (so) non-blocking sockets with TCP urgent
    disabled get still selected for read ops (win)
  - RH706106, S6618658, CVE-2011-0865: Vulnerability in deserialization
  - RH706111, S7012520, CVE-2011-0815: Heap overflow vulnerability in 
    FileDialog.show() (win)
  - RH706139, S7013519, CVE-2011-0822, CVE-2011-0862: Integer overflows in 2D 
    code
  - RH706153, S7013969, CVE-2011-0867: NetworkInterface.toString can reveal 
    bindings
  - RH706234, S7013971, CVE-2011-0869: Vulnerability in SAAJ
  - RH706239, S7016340, CVE-2011-0870: Vulnerability in SAAJ
  - RH706241, S7016495, CVE-2011-0868: Crash in Java 2D transforming an image 
    with scale close to zero
  - RH706248, S7020198, CVE-2011-0871: ImageIcon creates Component with null acc
  - RH706245, S7020373, CVE-2011-0864: JSR rewriting can overflow memory address
    size variables


author: Jiri Vanek <jvanek@redhat.com> - 1:1.6.0.0-59.1.10.3
changelog:
  - updated to icedtea6 1.10.3
  - http://blog.fuseyism.com/index.php/2011/07/21/icedtea6-1103-released/


author: Jiri Vanek <jvanek@redhat.com> - 1.7.0.40-2.4.3.2.fel7
changelog:
  - added and applied patch121, FixPPC64StackOverflow.patch
  - all redundant ppc64 strings replaced by power64 macro
  - Resolves:rhbz#1018680


author: Alexander Kurtakov <akurtako@redhat.com> 3.15.0-1
changelog:
  - Update to latest upstream release.
  - Add javassist:javassist depmap.
  - The project is now triple licensed.


author: Michal Srb <msrb@redhat.com> - 9.0.0-2
changelog:
  - Replace tomcat libs with glassfish libs
  - Add ability to build package without service files
  - Remove unneeded ecj custom depmap


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 9.0.3-6
changelog:
  - Clean unused conditional code
  - Remove unused system-related code
  - Remove jetty binary package
  - Install license wiles with jatty-util package


author: Christina Fu <cfu@redhat.com> - 4.2.6-21
changelog:
  - Bugzilla Bug #737122 - DRM: during archiving and recovering, wrapping
    unwrapping keys should be done in the token
  - support for PKCS5v2; support for secure PKCS12
  - Bugzilla Bug #744797 - KRA key recovery (retrieve pkcs#12) fails after the
    in-place upgrade( CS 8.0->8.1)


author: Christina Fu <cfu@redhat.com> - 4.2.6-23
changelog:
  - Bugzilla Bug #797351 - JSS - HSM token name was mistaken for manufacturer
    identifier (cfu)
  - Bugzilla Bug #804840 - [RFE] ECC encryption keys cannot be archived
    ECC phase2 work - support for ECC encryption key archival and recovery (cfu)
  - Bugzilla Bug #783007 - Un-deprecate previously deprecated methods in
    JSS 4.2.6 . . . (mharmsen)
  - Dogtag TRAC Task #109 (https://fedorahosted.org/pki/ticket/109) - add
    benign JNI jar file symbolic link from JNI libdir to JNI jar file (mharmsen)


author: Martin Briza <mbriza@redhat.com> 19-17.2
changelog:
  - so depending on /lib/systemd/systemd-multi-seat-x is considered a broken dependency - kdm depends on systemd instead


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:1.7.5-21
changelog:
  - Reimplement abs2rel.sh using perl File::Spec module
  - Resolves: rhbz#823669
  - Resolves: rhbz#882578


author: Than Ngo <than@redhat.com> - 4.10.5-3
changelog:
  - CVE-2013-4132, backport systray icons memleak fix
  - CVE-2013-4133, backport potential kcheckpass security issue


author: Colin Walters <walters@verbum.org> - 1:1.8.5-6
changelog:
  - Include mozjs185.pc, clean up build
  - Based on work from Christopher Aillon <caillon@redhat.com>
  - Switch to using make install DESTDIR=, instead of hardcoding build rules.
  - Add DESTDIR= patch from GNOME 3.2 jhbuild
  - Make mozjs185 the canonical target for both libmozjs and libmozjs185.


author: Krzysztof Daniel <kdaniel@redhat.com> 0:0.1.46-2
changelog:
  - Updated MANIFEST.MF to match the actual upstream version.
  - Added plugin.properties to get proper vendor name in Eclipse.


author: Jan Grulich <jgrulich@redhat.com> 0.9.0.7-2
changelog:
  - fix the wpa2 bug with missing password field #bz832893
  - fix the bug with lock indicator #bz912603


author: Paul Wouters <pwouters@redhat.com> - 1.6.13-1
changelog:
  - Upgraded to 1.6.13, bugfix release
  - Added --disable-ecdsa as ECC is still banned
  - Removed --with-sha2 - it is always enabled and option was removed


author: Paul Wouters <pwouters@redhat.com> - 1.6.13-2
changelog:
  - Added reworked ldns-read-zone patch from trunk
    (adds -p for SOA padding, and -o for zeroizing timestamps/sigs)


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 444-7
changelog:
  - Fix less.sh not to override user-defined LESSOPEN variable (#802757)
  - Use POSIX regcomp instead of PCRE - revert 406-11, commit 4b961c7 (#643233)
  - Merge Foption changes by Colin Guthrie to Foption.v2.patch (#805735)


author: Martin Briza <mbriza@redhat.com> - 451-1
changelog:
  - Rebase to 451 (#835802)
  - Removed the empty-lessopen-pipe patch as the issue is now fixed upstream.


author: Jarod Wilson <jarod@redhat.com> [3.10.0-46.el7]
changelog:
  - [scsi] aacraid: missing capable() check in compat ioctl (Rich Bono) [1025840]
  - [scsi] scsi_dh_rdac: Add new IBM 1813 product id to rdac devlist (Rob Evers) [1020969]
  - [scsi] aic94xx: remove driver (Rich Bono) [978980]
  - [scsi] qla4xxx: Populate local CHAP credentials for flash target sessions (Chad Dupuis) [1006158]
  - [scsi] qla4xxx: Support setting of local CHAP index for flash target entry (Chad Dupuis) [1006158]
  - [scsi] qla4xxx: Correct the check for local CHAP entry type (Chad Dupuis) [1006158]
  - [scsi] qla4xxx: correctly update session discovery_parent_idx (Chad Dupuis) [1020197]
  - [scsi] aacraid: avoid parsing names as kthread_run() format strings (Rich Bono) [752081]
  - [scsi] hpsa: return 0 from driver probe function on success, not 1 (Tomas Henzl) [862713]
  - [scsi] hpsa: remove unused Smart Array ID (Tomas Henzl) [862713]
  - [scsi] hpsa: bump driver version to reflect changes (Tomas Henzl) [862713]
  - [scsi] hpsa: housekeeping patch for device_id and product arrays (Tomas Henzl) [862713]
  - [scsi] hpsa: add HP Smart Array Gen8 names (Tomas Henzl) [862713]
  - [scsi] hpsa: add HP Smart Array Gen9 PCI ID's (Tomas Henzl) [862713]
  - [treewide] Convert retrun typos to return (Tomas Henzl) [862713]
  - [scsi] hpsa: fix warning with smp_processor_id() in preemptible (Tomas Henzl) [862713]
  - [scsi] hpsa: remove unneeded variable (Tomas Henzl) [862713]
  - [scsi] hpsa: fix a race in cmd_free/scsi_done (Tomas Henzl) [862713]


author: Jarod Wilson <jarod@redhat.com> [3.10.0-47.el7]
changelog:
  - [net] bridge: pass correct vlan id to multicast code (Vlad Yasevich) [912737]
  - [net] bridge: Fix updating FDB entries when the PVID is applied (Vlad Yasevich) [912737]
  - [net] bridge: Fix the way the PVID is referenced (Vlad Yasevich) [912737]
  - [net] bridge: Apply the PVID to priority-tagged frames (Vlad Yasevich) [912737]
  - [net] bridge: Don't use VID 0 and 4095 in vlan filtering (Vlad Yasevich) [912737]
  - [net] bridge: Correctly clamp MAX forward_delay when enabling STP (Vlad Yasevich) [997814]
  - [net] bridge: Clamp forward_delay when enabling STP (Vlad Yasevich) [997814]
  - [net] ipv6: mld: introduce mld_{gq, ifc, dad}_stop_timer functions (Daniel Borkmann) [1023947]
  - [net] ipv6: mld: refactor query processing into v1/v2 functions (Daniel Borkmann) [1023947]
  - [net] ipv6: mld: similarly to MLDv2 have min max_delay of 1 (Daniel Borkmann) [1023947]
  - [net] ipv6: mld: implement RFC3810 MLDv2 mode only (Daniel Borkmann) [1023947]
  - [net] ipv6: mld: get rid of MLDV2_MRC and simplify calculation (Daniel Borkmann) [1023947]
  - [net] ipv6: mld: clean up MLD_V1_SEEN macro (Daniel Borkmann) [1023947]
  - [net] ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12. (Daniel Borkmann) [1023947]
  - [net] ipv6: mcast: use defines for rfc3810/8.1 lengths (Daniel Borkmann) [1023947]
  - [net] ipv6: *_start_timer: rather use unsigned long (Daniel Borkmann) [1023947]
  - [net] ipv6: igmp6_event_query: use msecs_to_jiffies (Daniel Borkmann) [1023947]
  - [net] ipv6: make unsolicited report intervals configurable for mld (Daniel Borkmann) [1023947]
  - [net] ipv4, ipv6: send igmpv3/mld packets with TC_PRIO_CONTROL (Daniel Borkmann) [1023947]
  - [net] bridge: disable snooping if there is no querier (Vlad Yasevich) [1019950]
  - [net] unix: inherit SOCK_PASS{CRED, SEC} flags from socket to fix race (Daniel Borkmann) [1023964]


author: Jarod Wilson <jarod@redhat.com> [3.10.0-48.el7]
changelog:
  - [ethernet] qlcnic: Update version to 5.3.48 (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Implement ndo_get_phys_port_id for 82xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Enable diagnostic test for multiple Tx queues (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Multi Tx queue support for 82xx Series adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Update version to 5.3.47 (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Add support for 84xx adapters to load firmware from file (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Loopback Inter Driver Communication AEN handler (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Add PVID support for 84xx adapters (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Enable support for 844X adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Update version to 5.2.46 (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Dump mailbox command data when a command times out (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix driver initialization for 83xx adapters (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Flush mailbox command list when mailbox is not available (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Reinitialize mailbox data structures after firmware reset (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix diagnostic interrupt test for 83xx adapters (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix beacon state return status handling (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix set driver version command (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix for flash update failure on 83xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix link speed and duplex display for 83xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix link speed display for 82xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix external loopback test (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Removed adapter series name from warning messages (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Free up memory in error path (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix ingress MAC learning (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix MAC address filter issue on 82xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Update version to 5.2.45 (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Enable mailbox interface in poll mode when interrupts are not available (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Replace poll mode mailbox interface with interrupt based mailbox interface (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Interrupt based driver firmware mailbox mechanism (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Enhance diagnostic loopback error codes (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix diagnostic interrupt test for 83xx adapters (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix setting Guest VLAN (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix operation type and command type (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix initialization of work function (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix guest VLAN (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix releasing of Tx frag which was never mapped (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix dump template version mask (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix ethtool display for 83xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix panic while setting VF's MAC address (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix multicast packet handling for PF and VF (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix NULL pointer dereference in VF probe path (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Set __QLCNIC_DEV_UP in adapter state before enabling interrupts (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix invalid register offset calculation (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Update version to 5.2.44 (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Add support for 83xx suspend and resume (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Add support for 'set driver version' in 83XX (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Cleanup of structure qlcnic_hardware_context (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Add support for PEX DMA method to read memory section of adapter dump (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Minimize sleep duration within loopback diagnostic test (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Secondary unicast MAC address support (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Handle qlcnic_alloc_mbx_args() failure (Chad Dupuis) [725018]
  - [ethernet] qlcnic: replace strict_strtoul() with kstrtoul() (Chad Dupuis) [725018]
  - [ethernet] qlcnic: remove redundant D0 power state set (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Fix typo in printk (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Update version to 5.2.43 (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Enhance virtual NIC logging (Chad Dupuis) [725018]
  - [ethernet] qlcnic: qlcnic_get_board_name() function cleanup (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Implement GET_LED_STATUS command for 82xx adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: modify reset recovery path in diag mode (Chad Dupuis) [725018]
  - [ethernet] qlcnic: diagnostics routine changes (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Convert nested if-else to switch-case (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Initialize trans_work and idc_aen_work at VF probe (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Remove qlcnic_config_npars module parameter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Update IRQ name for 8200 and 8300 Series adapter (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Disable INT-x interrupt for 83xx on driver unload (Chad Dupuis) [725018]
  - [ethernet] qlcnic: Support spoof check config (Chad Dupuis) [725018]
  - [x86] Fix x86 invalid cpu boot failure message (Prarit Bhargava) [1024731]
  - [virt] virtio-net: refill only when device is up during setting queues (Jason Wang) [1016469]
  - [crypto] crc-t10dif: add MODULE_SOFTDEP (Kyle McMartin) [968869]
  - [crypto] crct10dif: Add fallback for broken initrds (Kyle McMartin) [968869]
  - [crypto] crct10dif: Use PTR_RET (Kyle McMartin) [968869]
  - [crypto] crct10dif: Simple correctness and speed test for CRCT10DIF hash (Kyle McMartin) [968869]
  - [crypto] crct10dif: Glue code to cast accelerated CRCT10DIF assembly as a crypto transform (Kyle McMartin) [968869]
  - [crypto] crct10dif: Accelerated CRC T10 DIF computation with PCLMULQDQ instruction (Kyle McMartin) [968869]
  - [crypto] crct10dif: Wrap crc_t10dif function all to use crypto transform framework (Kyle McMartin) [968869]
  - [kernel] modules: add support for soft module dependencies (Kyle McMartin) [968869]
  - [misc] mei: don't get stuck in select during reset (Prarit Bhargava) [1025420]
  - [misc] mei/bus: do not overflow the device name buffer (Prarit Bhargava) [1025420]
  - [misc] mei: wake also writers on reset (Prarit Bhargava) [1025420]
  - [misc] mei/hbm: fix typo in error message (Prarit Bhargava) [1025420]
  - [misc] mei: check whether hw start has succeeded (Prarit Bhargava) [1025420]
  - [misc] mei: check if the hardware reset succeeded (Prarit Bhargava) [1025420]
  - [misc] mei: mei_cl_connect, don't multiply the timeout twice (Prarit Bhargava) [1025420]
  - [misc] mei: do not override a client writing state when buffering (Prarit Bhargava) [1025420]
  - [misc] mei: move mei_cl_irq_write_complete to client.c (Prarit Bhargava) [1025420]
  - [misc] mei: support HBM versioning (Prarit Bhargava) [1025420]
  - [nfc] mei_phy: Clean up file (Prarit Bhargava) [1025420]
  - [misc] mei: move mei_cl_complete to client.c (Prarit Bhargava) [1025420]
  - [misc] mei: revamp interrupt thread handlers (Prarit Bhargava) [1025420]
  - [virt] virtio-net: correctly handle cpu hotplug notifier during resuming (Jason Wang) [1016996]
  - [virt] virtio-net: don't respond to cpu hotplug notifier if we're not ready (Jason Wang) [1016996]
  - [fs] nfs: fix handling of invalid mount options in nfs_remount (Jeff Layton) [1021538]
  - [fs] nfs: reject version and minorversion changes on remount attempts (Jeff Layton) [1021538]
  - [drm] qxl: avoid an oops in the deferred io code (Dave Airlie) [1003728 1026182]
  - [drm] qxl: fix disabling extra monitors from client (Dave Airlie) [1026182]
  - [drm] qxl: remove unnecessary check (Dave Airlie) [1026182]
  - [drm] qxl: prefer the monitor config resolution (Dave Airlie) [1026182]
  - [drm] copy mode type in drm_mode_connector_list_update() (Dave Airlie) [1026182]
  - [drm] qxl: notify that the monitor config changed (Dave Airlie) [1026182]
  - [drm] return if changed in drm_helper_hpd_irq_event() (Dave Airlie) [1026182]
  - [block] rsxx: Fix possible kernel panic with invalid config (Steve Best) [1024550]
  - [block] rsxx: Disallow discards from being unmapped (Steve Best) [1024550]
  - [virt] hid-hyperv: convert alloc+memcpy to memdup (Jason Wang) [1026618]
  - [virt] hyperv/storvsc: Increase the value of STORVSC_MAX_IO_REQUESTS (Jason Wang) [1026618]
  - [virt] hyperv/storvsc: Support FC devices (Jason Wang) [1026618]
  - [virt] hyperv: Add the GUID fot synthetic fibre channel device (Jason Wang) [1026618]
  - [virt] hyperv/storvsc: Implement multi-channel support (Jason Wang) [1026618]
  - [virt] hyperv/storvsc: Update the storage protocol to win8 level (Jason Wang) [1026618]
  - [virt] hyperv/storvsc: Increase the value of scsi timeout for storvsc devices (Jason Wang) [1026618]
  - [virt] hyperv/vmbus: Terminate vmbus version negotiation on timeout (Jason Wang) [1026618]
  - [virt] hv_util: Correctly support ws2008R2 and earlier (Jason Wang) [1026618]
  - [virt] hyperv/vmbus: Do not attempt to negoatiate a new version prematurely (Jason Wang) [1026618]
  - [virt] hyperv/vmbus: Fix a bug in the handling of channel offers (Jason Wang) [1026618]
  - [virt] hyperv: remove HV_DRV_VERSION (Jason Wang) [1026618]
  - [virt] hv_balloon: Initialize the transaction ID just before sending the packet (Jason Wang) [1026618]
  - [virt] hv_util: Fix a bug in version negotiation code for util services (Jason Wang) [1026618]
  - [virt] hyperv/vmbus: incorrect device name is printed when child device is unregistered (Jason Wang) [1026618]
  - [virt] hyperv: allocate synic structures before hv_synic_init() (Jason Wang) [1026618]
  - [virt] hyperv: check interrupt mask before read_index (Jason Wang) [1026618]
  - [virt] hyperv/vmbus: Implement multi-channel support (Jason Wang) [1026618]


author: Jarod Wilson <jarod@redhat.com> [3.10.0-49.el7]
changelog:
  - [usb] misc/usb3503: Fix compile error due to incorrect regmap depedency (Don Zickus) [895641]
  - [usb] storage: add quirk for mandatory READ_CAPACITY_16 (Don Zickus) [895641]
  - [usb] serial/option: blacklist Olivetti Olicard200 (Don Zickus) [895641]
  - [usb] quirks: add touchscreen that is dazzeled by remote wakeup (Don Zickus) [895641]
  - [usb] quirks: add one device that cannot deal with suspension (Don Zickus) [895641]
  - [usb] serial/option: add support for Inovia SEW858 device (Don Zickus) [895641]
  - [usb] serial/ti_usb_3410_5052: add Abbott strip port ID to combined table as well (Don Zickus) [895641]
  - [usb] support new huawei devices in option.c (Don Zickus) [895641]
  - [usb] xhci: Fix spurious wakeups after S5 on Haswell (Don Zickus) [895641]
  - [usb] xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registers (Don Zickus) [895641]
  - [usb] xhci: quirk for extra long delay for S4 (Don Zickus) [895641]
  - [usb] xhci: Don't enable/disable RWE on bus suspend/resume (Don Zickus) [895641]
  - [net] usbnet: fix handling padding packet (Don Zickus) [895641]
  - [usb] imx21: accept very late isochronous URBs (Don Zickus) [895641]
  - [usb] core: check usb device's state before sending a Set SEL control transfer (Don Zickus) [895641]
  - [usb] xhci: Fix xHCI host issues on remote wakeup (Don Zickus) [1016889]
  - [usb] serial/pl2303: distinguish between original and cloned HX chips (Don Zickus) [895641]
  - [usb] fix typo in usb serial simple driver Kconfig (Don Zickus) [895641]
  - [usb] core: fix incorrect type in assignment in descriptors_changed() (Don Zickus) [895641]
  - [usb] core: compare and release one bos descriptor in usb_reset_and_verify_device() (Don Zickus) [895641]
  - [usb] ehci: remove debugging statement with ehci statistics in ehci_stop() (Don Zickus) [895641]
  - [usb] ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c (Don Zickus) [895641]
  - [usb] ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set (Don Zickus) [895641]
  - [usb] ehci: remove ehci_vdbg() verbose debugging statements (Don Zickus) [895641]
  - [usb] xhci: Fix warning introduced by disabling runtime PM (Don Zickus) [1016889]
  - [usb] storage: audit sysfs attribute permissions (Don Zickus) [895641]
  - [usb] xhci: prevent "callbacks suppressed" when debug is not enabled (Don Zickus) [1016889]
  - [usb] xhci: fix port BESL LPM capability checking (Don Zickus) [1016889]
  - [usb] ohci: fix build error related to ohci_suspend/resume (Don Zickus) [895641]
  - [usb] serial: clean up attribute permissions (Don Zickus) [895641]
  - [usb] usbtmc: fix up attribute permissions (Don Zickus) [895641]
  - [usb] core: be specific about attribute permissions (Don Zickus) [895641]
  - [usb] core: use DRIVER_ATTR_RW() (Don Zickus) [895641]
  - [usb] don't use bNbrPorts after initialization (Don Zickus) [895641]
  - [usb] fail on usb_hub_create_port_device() errors (Don Zickus) [895641]
  - [usb] fix cleanup after failure in hub_configure() (Don Zickus) [895641]
  - [usb] ohci: add missing PCI PM callbacks to ohci-pci.c (Don Zickus) [895641]
  - [usb] serial: fix stringify operator in usb-serial-simple (Don Zickus) [895641]
  - [usb] wusbcore: Use usb_init_urb instead of creating the URB manually (Don Zickus) [895641]
  - [usb] wusbcore: fix leak of urb in wa_xfer_destroy (Don Zickus) [895641]
  - [usb] wusbcore: fix resource cleanup in error path in __wa_xfer_setup_segs (Don Zickus) [895641]
  - [usb] wusbcore: clear RPIPE stall for control endpoints (Don Zickus) [895641]
  - [usb] uss720: fix DMA-buffer allocation (Don Zickus) [895641]
  - [usb] quatech2: fix port DMA-buffer allocations (Don Zickus) [895641]
  - [usb] quatech2: fix serial DMA-buffer allocations (Don Zickus) [895641]
  - [usb] keyspan: fix port DMA-buffer allocations (Don Zickus) [895641]
  - [usb] keyspan: fix serial DMA-buffer allocations (Don Zickus) [895641]
  - [usb] rh_call_control tbuf overflow fix (Don Zickus) [895641]
  - [usb] host: add Kconfig option for EHSET (Don Zickus) [895641]
  - [usb] serial/pl2303: improve the chip type detection/distinction (Don Zickus) [895641]
  - [usb] serial/pl2303: improve the chip type information output on startup (Don Zickus) [895641]
  - [usb] serial/pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup() (Don Zickus) [895641]
  - [usb] xhci: fix dma mask setup in xhci.c (Don Zickus) [1016889]
  - [usb] xhci: trace debug statements related to ring expansion (Don Zickus) [1016889]
  - [usb] xhci: trace debug messages related to driver initialization and unload (Don Zickus) [1016889]
  - [usb] xhci: trace debug statements for urb cancellation (Don Zickus) [1016889]
  - [usb] xhci: add xhci_cmd_completion trace event (Don Zickus) [1016889]
  - [usb] xhci: add xhci_address_ctx trace event (Don Zickus) [1016889]
  - [usb] xhci: add trace for debug messages related to endpoint reset (Don Zickus) [1016889]
  - [usb] xhci: add trace for debug messages related to quirks (Don Zickus) [1016889]
  - [usb] xhci: add trace for debug messages related to changing contexts (Don Zickus) [1016889]
  - [usb] xhci: add traces for debug messages in xhci_address_device() (Don Zickus) [1016889]
  - [usb] xhci: remove CONFIG_USB_XHCI_HCD_DEBUGGING and unused code (Don Zickus) [1016889]
  - [usb] xhci: replace printk(KERN_DEBUG ...) (Don Zickus) [1016889]
  - [usb] xhci: replace xhci_info() with xhci_dbg() (Don Zickus) [1016889]
  - [usb] xhci: Add Device Tree support to XHCI Platform driver (Don Zickus) [1016889]
  - [usb] serial/pl2303: add two comments concerning the supported baud rates with HX chips (Don Zickus) [895641]
  - [usb] serial/pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips (Don Zickus) [895641]
  - [usb] serial/pl2303: increase the allowed baud rate range for the divisor based encoding method (Don Zickus) [895641]
  - [usb] serial/pl2303: move the two baud rate encoding methods to separate functions (Don Zickus) [895641]
  - [usb] serial/pl2303: remove 500000 baud from the list of standard baud rates (Don Zickus) [895641]
  - [usb] serial/pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method (Don Zickus) [895641]
  - [usb] serial/pl2303: fix the upper baud rate limit check for type_0/1 chips (Don Zickus) [895641]
  - [usb] serial/pl2303: fix+improve the divsor based baud rate encoding method (Don Zickus) [895641]
  - [usb] hwa: avoid constant suspend and resume on the root hub (Don Zickus) [895641]
  - [usb] adutux: fix big-endian device-type reporting (Don Zickus) [895641]
  - [usb] usbtmc: fix big-endian probe of Rigol devices (Don Zickus) [895641]
  - [usb] wusbcore: clean up list locking in urb enqueue (Don Zickus) [895641]
  - [usb] wusbcore: fix root hub hub_status_data to only return > 0 if status has actually changed (Don Zickus) [895641]
  - [usb] ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET (Don Zickus) [895641]
  - [usb] hcd: Log error code if reset() fails (Don Zickus) [895641]
  - [usb] misc/usb3503: Support operation with no I2C control (Don Zickus) [895641]
  - [usb] misc/usb3503: Add USB3503A to the compatible list (Don Zickus) [895641]
  - [usb] misc/usb3503: Default to hub mode (Don Zickus) [895641]
  - [usb] misc/usb3503: Fix typos in error messages (Don Zickus) [895641]
  - [usb] misc/usb3503: Factor out I2C probe (Don Zickus) [895641]
  - [usb] misc/usb3503: Convert to regmap (Don Zickus) [895641]
  - [usb] misc/usb3503: Actively manage Hub Connect GPIO (Don Zickus) [895641]
  - [usb] misc/usb3503: Use gpio_set_value_cansleep() (Don Zickus) [895641]
  - [usb] Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs (Don Zickus) [895641]
  - [usb] misc/usb3503: Convert to devm_ APIs (Don Zickus) [895641]
  - [usb] serial: move the "simple" drivers into usb-serial-simple.c (Don Zickus) [895641]
  - [net] usbnet: support DMA SG (Don Zickus) [895641]
  - [usb] xhci: mark no_sg_constraint (Don Zickus) [1016889]
  - [usb] introduce usb_device_no_sg_constraint() helper (Don Zickus) [895641]
  - [usb] ehci: support running URB giveback in tasklet context (Don Zickus) [895641]
  - [usb] ehci: improve interrupt qh unlink (Don Zickus) [895641]
  - [usb] ehci: improve ehci_endpoint_disable (Don Zickus) [895641]
  - [usb] hcd: support giveback of URB in tasklet context (Don Zickus) [895641]
  - [usb] fix some scripts/kernel-doc warnings (Don Zickus) [895641]
  - [usb] ehci: don't depend on hardware for tracking port resets and resumes (Don Zickus) [895641]
  - [usb] ehci: keep better track of resuming ports (Don Zickus) [895641]
  - [usb] pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type (Don Zickus) [895641]
  - [usb] refactor code for enabling/disabling remote wakeup (Don Zickus) [895641]
  - [usb] simplify the interface of usb_get_status() (Don Zickus) [895641]
  - [usb] xhci: add missing dma-mapping.h includes (Don Zickus) [895641]
  - [net] usbnet: centralize computing of max rx/tx qlen (Don Zickus) [895641]
  - [usb] serial: add driver for Suunto ANT+ USB device (Don Zickus) [895641]
  - [usb] ohci_usb warn "irq nobody cared" on shutdown (Don Zickus) [895641]
  - [usb] ohci-ep93xx: tidy up driver (*probe) and (*remove) (Don Zickus) [895641]
  - [usb] ohci-ep93xx: use devm_clk_get() (Don Zickus) [895641]
  - [usb] ohci-ep93xx: use platform_get_irq() (Don Zickus) [895641]
  - [usb] ohci-ep93xx: use devm_ioremap_resource() (Don Zickus) [895641]
  - [usb] usb-skeleton: add retry for nonblocking read (Don Zickus) [895641]
  - [usb] usbtmc: convert to devm_kzalloc (Don Zickus) [895641]
  - [usb] usbtmc: remove redundant braces (Don Zickus) [895641]
  - [usb] usbtmc: call pr_err instead of plain printk (Don Zickus) [895641]
  - [usb] usbtmc: remove trailing spaces (Don Zickus) [895641]
  - [usb] usbfs: Allow printer class 'get_device_id' without needing to claim the intf (Don Zickus) [895641]
  - [usb] remove redundant "#if" (Don Zickus) [895641]
  - [usb] misc: EHSET Test Fixture device driver for host compliance (Don Zickus) [895641]
  - [usb] clamp bInterval to allowed range (Don Zickus) [895641]
  - [usb] atm/speedtch: be careful with bInterval (Don Zickus) [895641]
  - [usb] cdc-acm: be careful with bInterval (Don Zickus) [895641]
  - [usb] fix build warning in pci-quirks.h when CONFIG_PCI is not enabled (Don Zickus) [895641]
  - [usb] xhci: Mark two functions __maybe_unused (Don Zickus) [895641]
  - [usb] check sg buffer size in usb_submit_urb (Don Zickus) [895641]
  - [usb] isp1362: move debug files from proc to debugfs (Don Zickus) [895641]
  - [usb] sl811: move debug files from proc to debugfs (Don Zickus) [895641]
  - [usb] remove unneeded idr.h include (Don Zickus) [895641]
  - [usb] sl811: remove CONFIG_USB_DEBUG dependency (Don Zickus) [895641]
  - [usb] isp116x: remove dependency on CONFIG_USB_DEBUG (Don Zickus) [895641]
  - [usb] isp1362: remove CONFIG_USB_DEBUG dependency (Don Zickus) [895641]
  - [usb] isp1362: remove _DBG() usage (Don Zickus) [895641]
  - [usb] isp1362: remove unused _WARN_ON() calls (Don Zickus) [895641]
  - [usb] isp1362: remove unused _BUG_ON() calls (Don Zickus) [895641]
  - [usb] usbatm: remove CONFIG_USB_DEBUG dependancy (Don Zickus) [895641]
  - [usb] usbatm: move the atm_dbg() call to use dynamic debug (Don Zickus) [895641]
  - [usb] usbatm: don't rely on CONFIG_USB_DEBUG (Don Zickus) [895641]
  - [usb] usbatm: remove unneeded trace printk calls (Don Zickus) [895641]
  - [usb] usbatm: remove unused UDSL_ASSERT macro (Don Zickus) [895641]
  - [usb] ti_usb_3410_5052: remove vendor/product module parameters (Don Zickus) [895641]
  - [usb] ti_usb_3410_5052: remove unused wait queue (Don Zickus) [895641]
  - [usb] ti_usb_3410_5052: kill private fifo (Don Zickus) [895641]
  - [usb] safe_serial: remove vendor/product module parameters (Don Zickus) [895641]
  - [usb] mos7840: remove broken chase implementation (Don Zickus) [895641]
  - [usb] io_ti: move port initialisation to probe (Don Zickus) [895641]
  - [usb] io_ti: kill private fifo (Don Zickus) [895641]
  - [usb] io_edgeport: remove unused defines (Don Zickus) [895641]
  - [usb] ftdi_sio: remove unused defines (Don Zickus) [895641]
  - [usb] ftdi_sio: remove vendor/product module parameters (Don Zickus) [895641]
  - [usb] ftdi_sio: remove redundant raise of DTR/RTS at open (Don Zickus) [895641]
  - [usb] ftdi_sio: clean up device initialisation (Don Zickus) [895641]
  - [usb] oti6858: do not call set_termios with uninitialised data (Don Zickus) [895641]
  - [usb] pl2303: remove debugging noise (Don Zickus) [895641]
  - [usb] pl2303: clean up set_termios (Don Zickus) [895641]
  - [usb] pl2303: clean up baud-rate handling (Don Zickus) [895641]
  - [usb] pl2303: refactor baud-rate handling (Don Zickus) [895641]
  - [usb] console: remove unnecessary operations test (Don Zickus) [895641]
  - [usb] console: use dev_dbg (Don Zickus) [895641]
  - [usb] serial: set drain delay at port probe (Don Zickus) [895641]
  - [usb] serial: clean up dtr_rts (Don Zickus) [895641]
  - [usb] serial: remove hupping check from tiocmiwait (Don Zickus) [895641]
  - [usb] serial: remove defensive test from set_termios (Don Zickus) [895641]
  - [usb] misc: remove CONFIG_USB_DEBUG from Makefile (Don Zickus) [895641]
  - [usb] adutux: remove direct calls to printk() (Don Zickus) [895641]
  - [usb] adutux: remove custom debug macro and module parameter (Don Zickus) [895641]
  - [usb] adutux: remove custom debug macro (Don Zickus) [895641]
  - [usb] adutux: remove unneeded tracing macros (Don Zickus) [895641]
  - [usb] legotower: remove direct calls to printk() (Don Zickus) [895641]
  - [usb] legotower: remove custom debug macro and module parameter (Don Zickus) [895641]
  - [usb] legousbtower: remove custom debug macro (Don Zickus) [895641]
  - [usb] legotower: remove unneeded tracing macros (Don Zickus) [895641]
  - [usb] ldusb: remove custom dbg_info() macro (Don Zickus) [895641]
  - [usb] xhci: Correct misplaced newlines (Don Zickus) [1016889]
  - [usb] xhci: refactor EHCI/xHCI port switching (Don Zickus) [1016889 970717]
  - [usb] xhci: Report USB 2.1 link status for L1 (Don Zickus) [1016889]
  - [usb] xhci: Refactor port status into a new function (Don Zickus) [1016889]
  - [usb] xhci: add the suspend/resume functionality (Don Zickus) [1016889]
  - [usb] move the definition of USB_MAXCHILDREN (Don Zickus) [895641]
  - [usb] atm: avoid parsing names as kthread_run() format strings (Don Zickus) [895641]
  - [usb] xhci: Add missing unlocks on error paths (Don Zickus) [895641]
  - [usb] ehci-atmel: prepare clk before calling enable (Don Zickus) [895641]
  - [usb] hwa: fix device probe failure (Don Zickus) [895641]
  - [usb] wusbcore: add sysfs attribute for retry count (Don Zickus) [895641]
  - [usb] wusbcore: add sysfs attribute for DNTS count and interval (Don Zickus) [895641]
  - [usb] check usb_hub_to_struct_hub() return value (Don Zickus) [895641]
  - [usb] ehci: Remove double assignment of .start in ehci_msp_hc_driver (Don Zickus) [895641]
  - [usb] ehci: export ehci_handshake for ehci-hcd sub-drivers (Don Zickus) [895641]
  - [usb] wusbcore: add scatter gather support (Don Zickus) [895641]
  - [usb] cdc-acm: remove unneeded spin_lock_irqsave/restore on write path (Don Zickus) [895641]
  - [usb] serial: increase the number of devices we support (Don Zickus) [895641]
  - [usb] serial: make minor allocation dynamic (Don Zickus) [895641]
  - [usb] xhci: remove BUG() in xhci_get_endpoint_type() (Don Zickus) [895641]
  - [usb] xhci: Remove BUG in xhci_setup_addressable_virt_dev (Don Zickus) [895641]
  - [usb] xhci: Remove BUG_ON in xhci_get_input_control_ctx (Don Zickus) [895641]
  - [usb] xhci: Remove BUG_ON() in xhci_alloc_container_ctx (Don Zickus) [895641]
  - [usb] ehci-platform: add pre_setup() method to platform data (Don Zickus) [895641]
  - [usb] serial: add minor and port number (Don Zickus) [895641]
  - [usb] wusbcore: ignore HWA_NOTIF_BPST_ADJ notifications (Don Zickus) [895641]
  - [usb] wusbcore: add HWA-specific fields to usb_rpipe_descriptor (Don Zickus) [895641]
  - [usb] wusbhc: disable suspend and resume on the root hub (Don Zickus) [895641]
  - [usb] fix PTR_ERR translation in init_usb_class() (Don Zickus) [895641]
  - [usb] wusbcore: reduce keepalive threshold from timeout/2 to timeout/3 (Don Zickus) [895641]
  - [usb] host: make USB_ARCH_HAS_?HCI obsolete (Don Zickus) [895641]
  - [usb] ohci: remove bogus #error (Don Zickus) [895641]
  - [usb] add usb2 Link PM variables to sysfs and usb_device (Don Zickus) [895641]
  - [usb] xhci: add USB2 Link power management BESL support (Don Zickus) [895641]
  - [usb] xhci: define port register names and use them instead of magic numbers (Don Zickus) [895641]
  - [usb] xhci: check usb2 port capabilities before adding hw link PM support (Don Zickus) [895641]
  - [usb] xhci: unify parameter of xhci_msi_irq (Don Zickus) [895641]
  - [usb] xhci-dbg: Display endpoint number and direction in context dump (Don Zickus) [895641]
  - [usb] serial: pl2303 works at 500kbps (Don Zickus) [895641]
  - [usb] ohci: add a name for the platform-private field (Don Zickus) [895641]
  - [usb] ohci: make ohci-platform a separate driver (Don Zickus) [895641]
  - [usb] misc/usb3503: Remove 100ms sleep on reset, conform to data sheet (Don Zickus) [895641]
  - [usb] misc/usb3503: Fix up whitespace (Don Zickus) [895641]
  - [usb] Allow the USB HCD to create Wireless USB root hubs (Don Zickus) [895641]
  - [usb] serial: add support Infineon modem USB flashloader driver (Don Zickus) [895641]
  - [usb] ohci: make ohci-pci a separate driver (Don Zickus) [895641]
  - [usb] ohci: Generic changes to make ohci-pci a separate driver (Don Zickus) [895641]
  - [usb] ohci: prepare to make ohci-hcd a library module (Don Zickus) [895641]
  - [usb] fhci: upgrade the isochronous API (Don Zickus) [895641]
  - [usb] imx21: upgrade the isochronous API (Don Zickus) [895641]
  - [usb] serial: dump small buffers with help of *ph (Don Zickus) [895641]
  - [usb] host: remove leftover release_mem_region (Don Zickus) [895641]
  - [usb] misc/usb3503: Adding device tree entry 'disabled-ports' (Don Zickus) [895641]
  - [usb] misc/usb3503: Add to select the ports to disable (Don Zickus) [895641]
  - [usb] ehci: Only sleep for post-resume handover if devices use persist (Don Zickus) [895641]
  - [usb] message: Fixed parenthesis error in sizeof function (Don Zickus) [895641]
  - [usb] message: fixed error 'no space before bracket' (Don Zickus) [895641]
  - [usb] devio: fixed error 'do not use assignment in if condition' (Don Zickus) [895641]
  - [usb] devio: Fixed macro parenthesis error (Don Zickus) [895641]
  - [usb] devio: fixed warning 'use <linux/uacces.h> instead <asm/uacces.h>' (Don Zickus) [895641]
  - [usb] usbtmc: Change magic number to constant (Don Zickus) [895641]
  - [usb] usbtmc: usbtmc_read sends multiple TMC header based on rigol_quirk (Don Zickus) [895641]
  - [usb] usbtmc: Set rigol_quirk if device is listed (Don Zickus) [895641]
  - [usb] usbtmc: TMC request code segregated from usbtmc_read (Don Zickus) [895641]
  - [usb] usbtmc: Add flag rigol_quirk to usbtmc_device_data (Don Zickus) [895641]
  - [usb] storage/alauda: initialize variables directly (Don Zickus) [895641]
  - [usb] storage/sddr09: initialize variables directly (Don Zickus) [895641]
  - [usb] fsl: add missing platform_driver owner (Don Zickus) [895641]
  - [usb] quatech2: Staticize local symbol (Don Zickus) [895641]
  - [usb] misc: Fixed assignment error in if statement (Don Zickus) [895641]
  - [usb] misc: Added space after closing brace in adutux.c (Don Zickus) [895641]
  - [usb] misc: Added space after comma in adutux.c (Don Zickus) [895641]
  - [usb] misc: Reformatted pointer variables in adutux.c (Don Zickus) [895641]
  - [usb] misc: Removed space before tabs in adutux.c (Don Zickus) [895641]
  - [usb] misc: Replaced deprecated preprocessor in adutux.c (Don Zickus) [895641]
  - [fs] nfsd: fix discarded security labels on setattr (J. Bruce Fields) [1025832]
  - [fs] nfs: fix inverted test for delegation in nfs4_reclaim_open_state (Jeff Layton) [1025457]
  - [x86] kdump: crashkernel=X try to reserve below 896M first, then try below 4G, then MAXMEM (Chao WANG) [994685]
  - [kernel] audit: format user messages to size of MAX_AUDIT_MESSAGE_LENGTH (Richard Guy Briggs) [1019913]
  - [kernel] audit_alloc: clear TIF_SYSCALL_AUDIT if !audit_context (Richard Guy Briggs) [1026043]


author: Jarod Wilson <jarod@redhat.com> [3.10.0-50.el7]
changelog:
  - [virt] hyperv/vmbus: Fix a bug in channel rescind code (Jason Wang) [1017564]
  - [virt] hyperv: Fix wrong check for synic_event_page (Jason Wang) [1017564]
  - [virt] hyperv/vmbus: fix vmbus_recvpacket_raw() return code (Jason Wang) [1017564]
  - [virt] hyperv/input: add a driver to support Hyper-V synthetic keyboard (Jason Wang) [1017564]
  - [virt] hyperv: Correctly guard the local APIC calibration code (Jason Wang) [1017564]
  - [virt] hyperv: Get the local APIC timer frequency from the hypervisor (Jason Wang) [1017564]
  - [kernel] stop_machine: fix race between stop_two_cpus and stop_cpus (Rik van Riel) [1023627]
  - [video] fb: make fp_get_options name argument const (Rob Clark) [1018414]
  - [drm] nouveau/device: recognise GK208 (Rob Clark) [1018414]
  - [drm] nouveau/graph: fix a number of missing explicit array terminators (Rob Clark) [1018414]
  - [drm] nouveau/disp: semi-complete link training sequence even if display disappears (Rob Clark) [1018414]
  - [drm] nouveau/bios: some older boards have shorter displayport tables (Rob Clark) [1018414]
  - [drm] nouveau/fbcon: bracket entrypoints with a per-device enabled check (Rob Clark) [1018414]
  - [drm] nouveau/disp: reorder writes to lane current control regs (Rob Clark) [1018414]
  - [drm] nouveau/disp: reorder writes to lane current control regs (Rob Clark) [1018414]
  - [drm] nouveau/disp: log if DP link training fails (Rob Clark) [1018414]
  - [drm] nouveau/disp: disable display underflow reporting at init (Rob Clark) [1018414]
  - [drm] nouveau/clock: fix accidental limiting of pll coefficients (Rob Clark) [1018414]
  - [drm] nouveau/device: use an additional bit from NV_PMC_BOOT_0 to identify chipset (Rob Clark) [1018414]
  - [drm] nouveau/bios/init: return failure condition on invalid opcodes (Rob Clark) [1018414]
  - [drm] nouveau/therm: ack any pending IRQ at init (Rob Clark) [1018414]
  - [drm] nouveau/therm: kill some over-zealous debugging (Rob Clark) [1018414]
  - [drm] radeon: don't use PACKET2 on CIK (Rob Clark) [1018414]
  - [drm] nouveau: split lock into list+exec and enable refcount locks (Rob Clark) [1018414]
  - [drm] nouveau: convert event handler apis to split create/enable semantics (Rob Clark) [1018414]
  - [drm] nouveau: share engine/channel constructor between implementations (Rob Clark) [1018414]
  - [drm] nouveau: prepare for the sharing of constructors between implementations (Rob Clark) [1018414]
  - [drm] nouveau: make vblank tracking data private to the implementations (Rob Clark) [1018414]
  - [drm] nouveau: share engine/channel struct definitions between implementations (Rob Clark) [1018414]
  - [drm] nouveau: Allow asymmetric nouveau_event_get/_put (Rob Clark) [1018414]
  - [drm] nouveau: Move event index check from critical section (Rob Clark) [1018414]
  - [drm] nouveau: Add priv field for event handlers (Rob Clark) [1018414]
  - [drm] nouveau: off by one in nouveau_drm_vblank_enable() (Rob Clark) [1018414]
  - [drm] backport to Linux 3.12-rc7 (Rob Clark) [1018414]
  - [firmware] dmi: add support for exact DMI matches in addition to substring matching (Rob Clark) [1025360]
  - [vga] vga_switcheroo: add driver control power feature (Rob Clark) [1025360]
  - [mm] vmscan: new shrinker API (Rob Clark) [1025360]
  - [kernel] Add arch_phys_wc_{add, del} to manipulate WC MTRRs if needed (Rob Clark) [1025360]
  - [kernel] mutex: Move ww_mutex definitions to ww_mutex.h (Rob Clark) [1025360]
  - [kernel] reservation: cross-device reservation support (Rob Clark) [1025360]
  - [kernel] locking-selftests: Handle unexpected failures more strictly (Rob Clark) [1025360]
  - [kernel] mutex: Add more w/w tests to test EDEADLK path handling (Rob Clark) [1025360]
  - [kernel] mutex: Add more tests to lib/locking-selftest.c (Rob Clark) [1025360]
  - [kernel] mutex: Add w/w tests to lib/locking-selftest.c (Rob Clark) [1025360]
  - [kernel] mutex: Add w/w mutex slowpath debugging (Rob Clark) [1025360]
  - [kernel] mutex: Add support for wound/wait style locks (Rob Clark) [1025360]
  - [kernel] mutex: Make __mutex_fastpath_lock_retval return whether fastpath succeeded or not (Rob Clark) [1025360]


