DrakX - en to unknown language translation catalogue (2735 entries)

en: 		 user name: %s
    		 on path: %s
target: 		 no d' uzeu: %s
    		 tchimin: %s

en: 		Erase=%s
target: 		Disfaceer=%s

en: 	-Hard drive.
target: 	-Deure plake.

en: 	-Network by SSH.
target: 	- Pa rantoele avou SSH.

en: 	-Tape
target: 	- Binde

en: 	Send mail to %s
target: 	Emiler a %s

en: 	Use .backupignore files
target: 	Eployî les fitchîs .backupignore

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type "sndconfig" in a console.
target: 
    
    
    Note: Si vos avoz ene cåte son ISA PnP, vos dvroz eployî l' programe sndconfig. Po çoula tapez «sndconfig» sol roye di comande.

en: 
    
     Thanks:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>
target: 
    
     Gråces:
    	- Prodjet LTSP http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
target: 
    
    (ASTEME! Vos eployîz on sistinme di fitchîs XFS po vosse pårticion raecene,
    li fijhaedje d' ene plakete d' enondaedje so ene plakete di 1,44 Mo frè
    seurmint berwete, ca l' XFS a mezåjhe d' on mineu ki prind del plaece.)

en: 
    
    Enter a Zeroconf host name without any dot if you don't
    want to use the default host name.
target: 
    
    Dinez on no d' lodjoe po zeroconf sins pont si vos n' voloz
    nén eployî li prémetou no d' lodjoe.

en: 
    
    Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or "Raw printer" is highlighted.
target: 
    
    Verifyîz ki Printerdrake a fwait comufåt li deteccion 
    otomatike do modele di vosse sicrirece, s' i vs plait.
    Cweroz après li modele corek el djivêye si on måva 
    modele a stî trové, ou si c' est «Eprimaedje direk» 
    (çou ki vout dire ki nou mineu a stî trové).

en: 
    
    Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.
target: 
    
    Printerdrake n' a nén savou vey li modele di vosse sicrirece %s. Tchoezixhoz l' modele corek e l' djivêye s' i vs plait.

en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
target: 
    
    Vosse cåte eploye pol moumint li mineu %s«%s» (li prémetou mineu po vosse cåte est «%s»)

en: 
                          DrakBackup Daemon Report
target: 
                          Rapoirt do démon DrakBackup

en: 
                          DrakBackup Report
target: 
                          Rapoirt di DrakBackup

en: 
                        DrakBackup Report Details
target: 
                        Detays do rapoirt di DrakBackup

en: 
     Copyright (C) 2001-2002 by MandrakeSoft 
         DUPONT Sebastien (original version)
         CHAUMETTE Damien <dchaumette\@mandrakesoft.com>
    
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2, or (at your option)
     any later version.
    
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
    
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
    
     Thanks:
        -  pfm2afm:   
    	 by Ken Borgendale:
    	    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
        -  type1inst:
    	 by James Macnicol: 
    	    type1inst generates files fonts.dir fonts.scale & Fontmap.
        -  ttf2pt1:   
    	  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
                 Convert ttf font files to afm and pfb fonts
target: 
     Copyright © 2001-2002 MandrakeSoft 
            DUPONT Sébastien (prumire modêye)
            CHAUMETTE Damien <dchaumette\@mandrakesoft.com>
    
     Çouchal, c' est on libe programe; vos l' poloz bén spåde et vos l' poloz
     bén candjî tot shuvant li Licince Publike Djeneråle (GPL) di GNU eplaideye
     pal Free Software Foundation; ça pout esse li 2e modêye del licince ou
     (si vos inmez mî) ene pus nouve.
    
     Li programe est spårdou avou l' espwer k' i serè ahessåve,
     mins SINS NOLE WAERANTEYE; dji n' waeranti nén minme ki vos VINDRÎZ
     bén li programe ou ki vos vs È SIEVRÎZ BÉN PO ENE SÔRE OU L' ÔTE.
     Waitîz li Licince Publike Djeneråle (GPL) di GNU po vey les pondants
     eyet les djondants.
    
     Avou ci programe ci, vos dvrîz aveur riçuvou ene copeye del Licince Publike
     Djeneråle (GPL) di GNU; si vos n' l' avoz nén avou, sicrijhoz al
        Free SoftWare Foundation, Inc.,
        59 Temple Place - Suite 330,
        Boston, MA 02111-1307, USA.
    
     Gråces:
        -  pfm2afm:   
    	 pa Ken Borgendale:
    	    Kiviersaedje di fitchîs Windows .pfm en .afm (Adobe Font Metrics)
        -  type1inst:
    	 pa James Macnicol: 
    	    type1inst djenere les fitchîs fonts.dir fonts.scale & Fontmap.
        -  ttf2pt1:   
    	 pa Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
           Kiviersaedje fi fontes ttf e fontes afm et pfb

en: 
     Copyright (C) 2002 by MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com
target: 
     Copyright © 2002 MandrakeSoft 
     Stew Benedict <sbenedict\@mandrakesoft.com>

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
target: 
     Problinme di raloyaedje FTP: çoula n' a nén stî possibe d' evoyî vos fitchîs copeye di såvrité pa FTP.

en: 
    - Burn to CD
target: 
    - Broûler on CD

en: 
    - Delete hard drive tar files after backup.
target: 
    - Disfacer les fitchîs årtchive «tar» del deure plake après aveur fwait les copeyes di såvrité.

en: 
    - Options:
target: 
    - Tchuzes:

en: 
    - Other Files:
target: 
    - Ôtes fitchîs:

en: 
    - Save to Tape on device: %s
target: 
    - Schaper so binde, e l' éndjin: %s

en: 
    - System Files:
target: 
    - Fitchîs sistinme:

en: 
    - User Files:
target: 
    - Fitchîs des uzeus:

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
target: 
    Ossu, les scrireces apontieyes avou des fitchîs PPD dnés pal costrujheu oudonbén avou les mineus CUPS d' oridjene ni polèt nén esse transferêyes nerén.

en: 
    Backup Sources:
target: 
    Sourdant pol copeye di såvrité:

en: 
    Chances are, this partition is
    a Driver partition. You should
    probably leave it alone.
target: 
    I gn a des tchances po ki cisse
    pårticion chal soeye ene pårticion
    k' i gn a des mineus dvins. Vos
    dvrîz motoit l' leyî.

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
target: 
    Proficiat! Li scrirece da vosse est asteure astalêye eyet apontieye!
    
    Vos ploz eprimî avou li comande «Eprimî» di vos programes (normålmint elle est dizo l' menu «Fitchî»).
    
    Si vos vloz radjouter, bodjî ou candjî l' no d' ene sicrirece, ou si vos vloz candjî les prémetowès tchuzes (sôre di papî, cwålité del rexhowe,...), tchoezixhoz «Sicrirece» dins l' seccion «Éndjolreye» do cinte di contrôle di Mandrake.

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
target: 
    Si vos avoz ene cåte ISA, les valixhances sol waitroûlêye ki shût dvreut
    esse les bones.
    
    Si vos avoz ene cåte PCMCIA, vos dvoz cnoxhe l' IRQ et I/R di vosse cåte.

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
target: 
    Noerixhoz les scrireces ki vos vloz transferer et clitchîz 
    so «Transfer».

en: 
    Please check all options that you need.
target: 
    Verifyîz totes les tchuzes ki vos avoz mezåjhe, s' i vs plait.

en: 
    Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.
target: 
    Po les scrireces d' on sierveu CUPS å lon i gn a nou mezåjhe dels
    apontyî chal: ele sront otomaticmint trovêyes.

en: 
    Select the theme for
    lilo and bootsplash,
    you can choose
    them separately
target: 
    Tchoezixhoz on tinme po lilo
    ey ene imådje pol waitroûle
    d' enondaedje, vos les ploz
    tchoezi separumint

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Les comandes «%s» et «%s» permetèt ossu di candjî les tchuzes po ene bouye d' eprimaedje dnêye. Tot simplumint radjoutez les tchuzes ki vos vloz el roye di comande, eg: «%s <fitchî>».

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Li comande «%s» permete ossu di candjî les tchuzes po ene bouye d' eprimaedje dnêye. Tot simplumint radjoutez les tchuzes ki vos vloz el roye di comande, eg: «%s <fitchî>».

en: 
    There are %d unknown printers directly connected to your system
target: 
    I gn a %d scrireces nén cnoxhowes di raloyeyes direk so voste éndjole

en: 
    There is one unknown printer directly connected to your system
target: 
    I gn a-st ene sicrirece nén cnoxhowe di raloyeye direk so voste éndjole

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
target: 
    Cisse sipeciåle pårticion
    d' enondaedje chal c' est po
    vos poleur tchoezi l' sistinme
    d' operance a-z enonder cwand
    vos enondez li copiutrece.

en: 
    Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]
target: 
    Po s' e siervi: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
target: 
    Wilicome å macrea d' apontiaedje des scrireces
    
    Ci macrea chal vos permetrè d' astaler des scrireces locåles ou då lon po ls eployî a pårti di ciste éndjole chal et ossu d' ôtès éndjoles sol rantoele.
    
    I vos dmandrè totes les informåcions k' i fåt po-z apontyî les scrireces et vos denrè accès a tos les mineus di scrirece k' i gn a, les tchuzes po les mineus, et les sôres di raloyaedje åzès scrireces.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Bénvnowe sol macrea d' apontiaedje des scrireces
    
    Ci macrea chal vs aidrè a-z astaler vos scrireces ki sont raloyeyes a cisse copiutrece chal ou sol rantoele locåle.
    
    Si vos avoz des scrireces di raloyeyes so ciste éndjole chal, verifyîz k' ele sont bén tchoûkeyes et esprindowes po zeles poleur esse detectêyes otomaticmint. Vos scrireces rantoele dvèt ossu esse en alaedje.
    
    Notez ki l' deteccion otomatike des scrireces sol rantoele prind ene miete pus di tins ki l' deteccion des scrireces ki sont raloyeyes direk so ciste éndjole chal. Adon, vos dvrîz disclitchî li deteccion des scrireces rantoele si vos n' end avoz nén mezåjhe.
    
    Clitchîz so «Shuvant» cwand vos estoz presse, ou so «Rinoncî» si vos n' voloz nén apontyî vos scrireces pol moumint.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Bénvnowe sol macrea d' apontiaedje des scrireces
    
    Ci macrea chal vs aidrè a-z astaler vos scrireces ki sont raloyeyes a cisse copiutrece chal, sol rantoele locåle ou so ene éndjole Windows å lon.
    
    Si vos avoz des scrireces di raloyeyes so ciste éndjole chal, verifyîz k' ele sont bén tchoûkeyes et esprindowes po zeles poleur esse detectêyes otomaticmint. Vos scrireces rantoele ou so les éndjoles Windows dvèt ossu esse en alaedje.
    
    Notez ki l' deteccion otomatike des scrireces sol rantoele prind ene miete pus di tins ki l' deteccion des scrireces ki sont raloyeyes direk so ciste éndjole chal. Adon, vos dvrîz disclitchî li deteccion des scrireces rantoele et Windows si vos n' end avoz nén mezåjhe.
    
    Clitchîz so «Shuvant» cwand vos estoz presse, ou so «Rinoncî» si vos n' voloz nén apontyî vos scrireces pol moumint.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Bénvnowe sol macrea d' apontiaedje des scrireces
    
    Ci macrea chal vs aidrè a-z astaler vos scrireces ki sont raloyeyes a cisse copiutrece chal.
    
    Si vos avoz des scrireces di raloyeyes so ciste éndjole chal, verifyîz k' ele sont bén tchoûkeyes et esprindowes po zeles poleur esse detectêyes otomaticmint.
    
    Clitchîz so «Shuvant» cwand vos estoz presse, ou so «Rinoncî» si vos n' voloz nén apontyî vos scrireces pol moumint.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Bénvnowe sol macrea d' apontiaedje des scrireces
    
    Ci macrea chal vs aidrè a-z astaler vos scrireces ki sont raloyeyes a cisse copiutrece chal.
    
    Si vos avoz des scrireces di raloyeyes so ciste éndjole chal, verifyîz k' ele sont bén tchoûkeyes et esprindowes po zeles poleur esse detectêyes otomaticmint.
    
    Clitchîz so «Shuvant» cwand vos estoz presse, ou so «Rinoncî» si vos n' voloz nén apontyî vos scrireces pol moumint.

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
target: 
    Bénvnowe.
    
    Les parametes del astalaedje otomatike sont ezès seccions sol hintche

en:          Restore Configuration
target:          Rimete l' apontiaedje come divant

en:         - Create Etherboot Enabled Boot Images:
            	To boot a kernel via etherboot, a special kernel/initrd image must be created.
            	mkinitrd-net does much of this work and drakTermServ is just a graphical 
            	interface to help manage/customize these images. To create the file 
            	/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in 
            	dhcpd.conf, you should create the etherboot images for at least one full kernel.
target:         - Ahiver des imådjes d' enondaedje po-z enonder pa rantoele (etherboot):
            	Po-z enonder on nawea pal rantoele, i vs fåt ahiver ene imådje di nawea/initrd speciåle.
            	mkinitrd-net fwait l' gros d' l' ovraedje et drakTermServ est djusse ene eterface
            	grafike po vs aidî a manaedjî/apontyî ces imådjes la. Po-z askepyî li fitchî
            	/etc/dhcpd.conf.etherboot-pcimap.include k' est prin et léjhou padhcpd.conf,
            	vos dvoz fé des imådjes d' enondaedje rantoele po on nawea etir pol moens .

en:         - Create etherboot floppies/CDs:
            	The diskless client machines need either ROM images on the NIC, or a boot floppy
            	or CD to initate the boot sequence.  drakTermServ will help generate these
            	images, based on the NIC in the client machine.
            		
            	A basic example of creating a boot floppy for a 3Com 3c509 manually:
            		
            	cat /usr/lib/etherboot/boot1a.bin \
            		/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0
target:         - Ahiver des plaketes/plakes lazer d' enondaedje rantoele (etherboot):
            		Les cliyints sins deurès plakes ont mezåjhe soeye-t i d' imådjes ROM so leu cåte rantoele,
            		soeye-t i d' ene plakete ou plake lazer d' enondaedje.  drakTermServ vos aidrè
            		a-z ahiver ces imådjes la, sorlon li cåte rantoele del éndjole cliyint.
    
            		Èn egzimpe d' askepiaedje al mwin d' ene plakete d' enondaedje po ene cåte 3Com 3c509:
            		
            	cat /usr/lib/etherboot/boot1a.bin \
            		/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0

en:         - Maintain /etc/exports:
            	Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
            	sets up the correct entry to allow anonymous access to the root filesystem from
            	diskless clients.
    
            	A typical exports entry for clusternfs is:
            		
            	/					(ro,all_squash)
            	/home				SUBNET/MASK(rw,root_squash)
    			
            	With SUBNET/MASK being defined for your network.
target:         - Mintni /etc/exports:
            		Clusternfs permete d' ebaguer li sistinme di fitchîs raecene viè les cliyints.
            		drakTermServ aponteye les bounès intrêyes po permete les accès anonimes
            		å sistinme di fitchîs raecene a pårti des cliyints sins deurès plakes.
    
            		Ene intrêye d' ebagaedje tipike po clusternfs sereut:
            		
            	/					(ro,all_squash)
            	/home				SUBNET/MASK(rw,root_squash)
    
            		Avou SUBNET/MASK definis po vosse rantoele.

en:         - Per client %s:
            	Through clusternfs, each diskless client can have its own unique configuration files
            	on the root filesystem of the server. By allowing local client hardware configuration, 
            	drakTermServ will help create these files.
target:         - Fitchî cliyint %s:
            		Avou «clusternfs», tchaeke posse cliyint sins deurès plakes a
            		si prôpe fitchî d' apontiaedje da sinne e sistinme di fitchîs
            		raecene do sierveu. Tot permetant l' apontiaedje locå del
            		éndjolreye des cliyints, drakTermServ aidrè-st a fé ces fitchîs la.

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
target:  <Tab>/<Alt-Tab> candjî elemints | <espace> tchoezi | <F12> waitroûlêye shuv.

en:  (Default is all users)
target:  (Prémetou: tos les uzeus)

en:  (Default)
target:  (Prémetou)

en:  (Make sure that all your printers are connected and turned on).
target:  (Acertinez vs ki totes vos scrireces sont raloyeyes ey en alaedje).

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target: (Les pôrts paraleles: /dev/lp0, /dev/lp1,..., corespondèt a LPT1:, LPT2:,..., Li 1re sicrirece USB: /dev/usb/lp0, li 2inme sicrirece USB: /dev/usb/lp1,...)

en:  (driver %s)
target:  (mineu %s)

en:  --doc <link>          - link to another web page ( for WM welcome frontend)
target:  --doc <hårdêye>       - hårdêye d' ene ôte pådje waibe (pol bénvnowe des scribannes)

en:  --help                - display this help
target:  --help                - mostere ci messaedje d' aidance chal.

en:  --id <id_label>       - load the html help page which refers to id_label
target:  --id <etikete_id>     - tchedje li pådje d' aidance ki corespond a l' etikete

en:  Accept/Refuse broadcasted icmp echo.
target: Accepter ou rfuzer les pakets broadcast icmp echo.

en:  Activate/Disable daily security check.
target: Mete/dismete li verifiaedje di såvrité di msec tchake djoû.

en:  Enabling su only from members of the wheel group or allow su from any user.
target:  Permete l' eployaedje di «su» rén ki po les mimbes do groupe «wheel» oudonbén l' permete po tos les uzeus.

en:  Erase Now
target:  Disfacer tot d' shûte

en:  Error while sending mail.
target:  Åk n' a nén stî tot-z evoyant on emile.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
target:  Si l' sicrirece ki vos vloz a stî detectêye otomaticmint, vos n' avoz k' a l' tchoezi dins l' djivêye et radjouter les nos d' uzeu, sicret et li groupe d' ovraedje s' end a mezåjhe.

en:  and the CD is in the drive
target:  eyet kel plake lazer est bén e léjheu

en:  cable
target:  cåbe

en:  drakhelp 0.1
    Copyright (C) 2003 MandrakeSoft.
    This is free software and may be redistributed under the terms of the GNU GPL.
    
    Usage:
target:  drakhelp 0.1
    Copyright © 2003 MandrakeSoft.
    Çouchal est on libe programe et pout esse cossemé dzo les termes del licince GPL.
    
    Po s' è siervi:

en:  enter `void' for void entry
target:  tapez «void» po ene intrêye vude

en:  isdn
target:  rdis

en:  local network
target:  rantoele locåle

en:  on
target:  so

en:  on LPD server "%s", printer "%s"
target:  sol sierveu LPD «%s», sicrirece «%s»

en:  on Novell server "%s", printer "%s"
target:  sol sierveu Novell «%s», sicrirece «%s»

en:  on SMB/Windows server "%s", share "%s"
target:  sol sierveu Windows «%s», pårtaedje «%s»

en:  on device: %s
target:  so l' éndjin: %s

en:  on parallel port #%s
target:  sol pôrt paralele #%s

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
target: !!! Mostere ki l' sicret dins l' båze di dnêyes do sistinme est diferin
     do ci dins l' båze di dnêyes do sierveu di terminås.
    Disfacez eyet radjoutez l' uzeu sol sierveu di terminås po vs poleur elodjî.

en: "%s" based winmodem detected, do you want to install needed software ?
target: On winmodem båzé so «%s» a stî trové, voloz vs astaler li mineu k' end a mezåjhe?

en: "%s" is not a valid email!
target: «%s» n' est nén ene adresse emile valide!

en: "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
target: «%s»: verifyîz ki l' tchuze est bén l' bone. Si vos dmorez dins
    èn ôte payis, clitchîz sol boton «%s» po ndè tchoezi èn ôte.
    Si vosse payis n' est nén e l' prumire djivêye di håynêye, clitchîz sol
    boton «%s» po-z aveur li djivêye en etir di tos les payis del Daegn.

en: "%s": clicking on the "%s" button will open the printer configuration
    wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
    information on how to setup a new printer. The interface presented there is
    similar to the one used during installation.
target: «%s»: si vos clitchîz so «%s» çoula enondrè li macrea
    d' apontiaedje des scrireces. Loukîz li tchaptrea corespondant do «Guide
    d' Enondaedje» po pus d' informåcions sol manire d' apontyî ene nouve
    sicrirece. L' eterface prezintêye chal rishonne al cisse håynêye tins
    di l' astalåcion.

en: "%s": if a sound card is detected on your system, it is displayed here.
    If you notice the sound card displayed is not the one that is actually
    present on your system, you can click on the button and choose another
    driver.
target: «%s»: si ene cåte son est detectêye so vosse sistinme, ele srè
    metowe chal. Si c' est nén l' cene ki vos avoz, vos ploz clitchî chal
    po tchoezi èn ôte mineu.

en: "Menu" key
target: Li tape «Menu»

en: %d KB
target: %d Ko

en: %d comma separated numbers
target: %d limeros separés pa des comas

en: %d comma separated strings
target: %d tchinnes separêyes pa des comas

en: %d minutes
target: %d munutes

en: %d packages
target: %d pacaedjes

en: %d seconds
target: %d segondes

en: %s (Port %s)
target: %s (Pôrt %s)

en: %s BootSplash (%s) preview
target: Vey divant del waitroûle d' enondaedje %s (%s)

en: %s already in use
target: %s est ddja en alaedje

en: %s cannot be displayed 
    . No Help entry of this type
target: %s èn pout nén esse håyné.
    Nole aidance di cisse sôre la

en: %s exists, delete?
    
    Warning: If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
target: %s egzistêye dedja, el disfacer?
    
    Asteme: si vos avoz ddja fwait çouchal vos dvroz seurmint
    purdjî l' intrêye do fitchî «authorized_keys» sol sierveu.

en: %s fonts conversion
target: coviertixhaedje di %s fontes

en: %s formatting of %s failed
target: %s l' abwesnaedje di %s a fwait berwete

en: %s found on %s, configure it automatically?
target: %s trové so %s, l' apontyî otomaticmint?

en: %s is not in the scanner database, configure it manually?
target: %s n' est nén el båze di dnêyes des scanreces, l' apontyî al mwin?

en: %s not found...
target: %s nén trové...

en: %s not responding
target: %s ni respond nén

en: %s on %s
target: %s so %s

en: %s: %s requires a username...
target: %s: %s a mezåjhe d' on no d' uzeu...

en: %s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...
target: %s: %s a mezåjhe do no do lodjoe, del adresse MAC del cåte, del adresse IP, del imådje nbi-image, di 0/1 pol variåve THIN_CLIENT, di 0/1 po l' apontiaedje locå...

en: %s: %s requires hostname...
target: %s: %s a mezåjhe do no d' lodjoe...

en: (E)IDE/ATA controllers
target: Controleus (E)IDE/ATA

en: (Note: Parallel ports cannot be auto-detected)
target: (Note: les pôrts paraleles èn polèt nén esse detectés otomaticmint)

en: (This) DHCP Server IP
target: IP do sierveu DHCP

en: (already added %s)
target: (%s a stî ddja radjouté)

en: (default value: %s)
target: (prémetowe valixhance: %s)

en: (on %s)
target: (so %s)

en: (on this machine)
target: (so ciste éndjole chal)

en: , %s sectors
target: , %s secteus

en: , TCP/IP host "%s", port %s
target: , lodjoe TCP/IP «%s», pôrt %s

en: , USB printer
target: , sicrirece USB

en: , USB printer #%s
target: , sicrirece USB #%s

en: , host "%s", port %s
target: , lodjoe «%s», pôrt %s

en: , multi-function device
target: , éndjin multi-fonccions

en: , multi-function device on HP JetDirect
target: , éndjin multi-fonccions so ene sicrirece HP Jetdirect

en: , multi-function device on USB
target: , éndjin USB multi-fonccions

en: , multi-function device on a parallel port
target: , éndjin multi-fonccions so pôrt paralele

en: , multi-function device on parallel port #%s
target: , éndjin multi-fonccions sol pôrt paralele #%s

en: , network printer "%s", port %s
target: , sicrirece rantoele «%s», pôrt %s

en: , printer "%s" on SMB/Windows server "%s"
target: , sicrirece «%s» sol sierveu SMB/Windows «%s»

en: , printer "%s" on server "%s"
target: , sicrirece «%s» sol sierveu «%s»

en: , printing to %s
target: , ki rexhe so %s

en: , using command %s
target: , tot-z eployant li cmande %s

en: - PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids
target: - Éndjins PCI eyet USB: djivêye avou les idintifiants po les vindeu, éndjin, dizo-vindeu et dizo-éndjin PCI/USB

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
target: - éndjins pci: çouchal dene li slot PCI, l' éndjin, et li sôre del cåte
    - éndjins eide: l' éndjin est èn éndjin mwaisse ou esclave
    - éndjins scsi: li bus scsi eyet les idintifiants (id) des éndjins scsi

en: /Autodetect _jazz drives
target: /Oto-detecter les léjheus _jazz

en: /Autodetect _modems
target: /Oto-detecter les _modems

en: /Autodetect _printers
target: /Oto-detecter les _scrireces

en: /File/-
target: /Fitchî/-

en: /File/Save _As
target: /Fitchî/Schaper et r_lomer

en: /File/_New
target: /Fitchî/_Novea

en: /File/_Open
target: /Fitchî/_Drovi

en: /File/_Quit
target: /Fitchî/Moussî _foû

en: /File/_Save
target: /Fitchî/_Schaper

en: /Help/_About...
target: /Aidance/Å _dfait...

en: /Options/Test
target: /Tchuzes/Saye

en: /Set as _Default
target: /Mete come _prémetou

en: /_About...
target: /Å _dfait...

en: /_Actions
target: /_Accions

en: /_Add Printer
target: /_Radjouter scrirece

en: /_Configure CUPS
target: /_Apontyî CUPS

en: /_Delete
target: /_Disfacer

en: /_Edit
target: /_Candjî

en: /_Expert mode
target: /Môde _sipepieus

en: /_Fields description
target: /Discrijhaedje des _tchamps

en: /_File
target: /_Fitchî

en: /_Help
target: /_Aidance

en: /_Options
target: /_Tchuzes

en: /_Quit
target: /Moussî _foû

en: /_Refresh
target: /_Rafrister

en: /_Report Bug
target: /_Rapoirter on bug

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
target: /etc/hosts.allow eyet /etc/hosts.deny sont ddja apontyîs - nén candjîs

en: /etc/issue* exist
target: /etc/issue* egzistêye

en: 1 MB
target: 1 Mo

en: 1 button
target: 1 boton

en: 1 minute
target: 1 munute

en: 16 MB
target: 16 Mo

en: 16 million colors (24 bits)
target: 16 miyons di coleurs (24 bits)

en: 2 MB
target: 2 Mo

en: 2 buttons
target: 2 botons

en: 256 colors (8 bits)
target: 256 coleurs (8 bits)

en: 256 kB
target: 256 Ko

en: 3 buttons
target: 3 botons

en: 3 buttons with Wheel emulation
target: Sori a troes botons avou rôlete emulêye

en: 32 MB
target: 32 Mo

en: 32 thousand colors (15 bits)
target: 32 meye coleurs (15 bits)

en: 4 MB
target: 4 Mo

en: 4 billion colors (32 bits)
target: 4 miyårds di coleurs (32 bits)

en: 512 kB
target: 512 Ko

en: 64 MB or more
target: 64 Mo ou di pus

en: 65 thousand colors (16 bits)
target: 65 meye coleurs (16 bits)

en: 8 MB
target: 8 Mo

en: <- Previous
target: <- Di dvant

en: <-- Del User
target: <-- Disfacer uzeu

en: <-- Delete
target: <-- Disfacer

en: <-- Edit Client
target: <-- Candjî cliyint

en: => Notice, a label changed:
    %s
target: => Prindoz asteme k' ene etikete a candjî:
    %s

en: => There are many things to choose from (%s).
target: => I gn a sacwantès afwaires a tchoezi (%s).

en: A command line must be entered!
target: Ene roye di cmande doet esse tapêye!

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
target: Ene plakete d' enondaedje (boot disk) da vosse vos permetrè d' enonder
    vosse sistinme GNU/Linux sins l' enondeu (boot loader) normå. Ça pout esse
    ahessåve si vos n' voloz nén astaler LILO (ou grub) so vosse sistinme,
    ou si èn ôte sistinme d' operance oistêye LILO ou co si LILO ni va nén
    so voste éndjole.
    Vosse plakete d' enondaedje pout siervi eto come imådje di såvrité (rescue
    image), çou ki vos schaprè li djoû ki vosse sistinme toumrè en rac po do bon.
    Voloz vs fé ene plakete d' enondaedje po vosse sistinme?
    %s

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
target: Ene plakete d' enondaedje (boot disk) da vosse vos permetrè d' enonder
    vosse sistinme GNU/Linux sins l' enondeu (boot loader) normå. Ça pout esse
    ahessåve si vos n' voloz nén astaler SILO so vosse sistinme, ou si èn ôte
    sistinme d' operance oistêye SILO ou co si SILO ni va nén so voste éndjole.
    Vosse plakete d' enondaedje pout siervi eto come imådje di såvrité (rescue
    image), çou ki vos schaprè li djoû ki vosse sistinme toumrè en rac po do bon.
    
    Si vos vloz fé ene plakete d' enondaedje po vosse sistinme, metoz ene
    plakete dins l' prumî léjheu di plaketes et clitchîz so «'l est bon».

en: A customizable environment
target: Èn evironmint apontiåve a vosse môde

en: A graphical environment with user-friendly set of applications and desktop tools
target: On evironmint grafike avou on amishtåve hopea di programes et d' usteyes pol sicribanne

en: A library which defends against buffer overflow and format string attacks.
target: Ene livreye po disfinde l' éndjole siconte les atake di «buffer overflow» eyet les atakes so les formataedjes des tchinnes.

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
target: I gn a ddja ene scrirece lomêye «%s» so %s. 
    Clitchîz so «Transfer» pol sipotchî.
    Vos ploz ossu dner on novea no, oudonbén passer houte
    l' apontiaedje di cisse sicrirece chal.

en: A problem occured while restarting the network: 
    
    %s
target: Åk n' a nén stî tot renondant li rantoele: 
    
    %s

en: A tool to monitor your logs
target: Ene usteye po vey vos fitchîs djournås

en: A valid URI must be entered!
target: Ene hårdêye di valåbe doet esse dinêye!

en: ADSL connection
target: Raloyaedje ADSL

en: ALL
target: TOS

en: ALL existing partitions and their data will be lost on drive %s
target: TOTES les pårticions et totes les dnêyes å dvins vont esse pierdowes sol deure plake %s

en: Abort
target: Rinoncî

en: About
target: Å dfait

en: About Harddrake
target: Å dfait di Harddrake

en: Accept
target: Accepter

en: Accept user
target: Accepter l' uzeu

en: Accept/Refuse bogus IPv4 error messages.
target: Accepter/rifuzer les crons messaedjes d' aroke IPv4.

en: Accessing printers on remote CUPS servers
target: Accès åzès scrireces sor on sierveu CUPS å lon

en: Account Login (user name)
target: No d' elodjaedje do conte (no d' uzeu)

en: Account Password
target: Sicret do conte

en: Across Network
target: å dtruviè del rantoele

en: Activate now
target: Mete en alaedje do côp

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
target: Enonde ou arestêye totes les eterfaces di rantoele apontieyes po
    s' mete en alaedje cwand c' est ki l' éndjole s' enonde.

en: Adapter %s: %s
target: Adaptoe %s: %s

en: Add
target: Radjouter

en: Add Client -->
target: Radjouter Cliyint -->

en: Add Printer
target: Radjouter scrirece

en: Add User -->
target: Radjouter uzeu -->

en: Add a module
target: Radjouter on module

en: Add a new printer
target: Radjouter ene novele sicrirece

en: Add a new printer to the system
target: Radjouter ene novele sicrirece å sistinme

en: Add a new rule at the end
target: Radjouter ene novele rîle al difén

en: Add a rule
target: Radjouter ene rîle

en: Add a scanner manually
target: Radjouter ene sicanrece al mwin

en: Add a user
target: Radjouter èn uzeu

en: Add an item
target: Radjouter on cayet

en: Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network.
target: Radjoutez chal les sierveus CUPS ki vos vloz eployî les scrireces. Vos l' duvoz  seulmint fé si les sierveus n' evoyèt nén sol rantoele locåle les informåcion so les scrireces da zels.

en: Add host
target: Radjouter lodjoe

en: Add host/network
target: Radjouter lodjoe/rantoele

en: Add server
target: Radjouter sierveu

en: Add this printer to Star Office/OpenOffice.org/GIMP
target: Radjouter cisse sicrirece chal po Star Office/OpenOffice.org/GIMP

en: Add to LVM
target: Radjouter å LVM

en: Add to RAID
target: Radjouter å RAID

en: Add user
target: Radjouter uzeu

en: Add/Del Clients
target: Radjouter/oister cliyints

en: Add/Del Users
target: Radjouter/oister uzeus

en: Adding printer to Star Office/OpenOffice.org/GIMP
target: Radjoutaedje d' ene sicrirece po Star Office/OpenOffice.org/GIMP

en: Additional CUPS servers:
target: Sierveus CUPS di rawete:

en: Advanced
target: Sipepieus

en: Advanced Configuration
target: Sipepieus apontiaedje

en: Advanced Options
target: Sipepieusès tchuzes

en: Advanced preferences
target: Sipepieusès tchuzes

en: Afghanistan
target: Afganistan

en: After changing type of partition %s, all data on this partition will be lost
target: Totes les dnêyes sol pårticion %s vont esse pierdowes dispoy candjî si sôre.

en: After formatting partition %s, all data on this partition will be lost
target: Totes les dnêyes sol pårticion %s vont esse pierdowes dispoy abwesnaedje

en: After resizing partition %s, all data on this partition will be lost
target: Totes les dnêyes sol pårticion %s vont esse pierdowes dispoy raptixhaedje

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
target: On côp ki ci sreut fwait, nos vos rcomindans di renonder l' evironmint
    X11 da vosse po nén risker des rujhes avou l' candjmint d' no di l' éndjole.

en: After you have configured the general bootloader parameters, the list of
    boot options that will be available at boot time will be displayed.
    
    If there are other operating systems installed on your machine they will
    automatically be added to the boot menu. You can fine-tune the existing
    options by clicking "%s" to create a new entry; selecting an entry and
    clicking "%s" or "%s" to modify or remove it. "%s" validates your
    changes.
    
    You may also not want to give access to these other operating systems to
    anyone who goes to the console and reboots the machine. You can delete the
    corresponding entries for the operating systems to remove them from the
    bootloader menu, but you will need a boot disk in order to boot those other
    operating systems!
target: Dispoy aveur apontyî les parametes djenerås di l' enondrece, li djivêye
    des tchuzes d' enondaedje ki sront disponibes å moumint d' l' enondaedje
    vont esse håynêyes.
    
    S' i gn a des ôtes sistinmes d' operance d' astalés so voste éndjole
    i sront otomaticmint radjoutés å menu d' l' enondrece. Vos ploz apontyî
    pus spepieuzmint les tchuzes tot clitchant so «%s» po fé ene novele
    intrêye; tchoezi ene intrêye k' i gn a eyet clitchî so «%s» oudonbén
    so «%s» pol candjî ou l' disfacer. «%s» po-z acertiner vos
    candjmints et les scrire sol deure plake.
    
    Motoit k' vos n' vôrîz nén dner accès a ces ôtes sistinmes d' operance
    a tot l' minme kî ki pôreut aveur accès al conzôle eyet renonder l' éndjole
    Vos ploz disfacer les intrêyes corespondantes po k' ele n' aparexhe pus
    dins l' menu d' l' enondrece, mins vos åroz adon mezåjhe d' ene plakete
    d' enondaedje po pleur enonder ces sistinme d' operance la!

en: Albania
target: Albaneye

en: Albanian
target: Albanyinne

en: Alcatel speedtouch usb
target: Alcatel Speedtouch USB

en: Algeria
target: Aldjereye

en: All
target: Tos

en: All I/O to the file system should be done synchronously.
target: Totes les scrijhaedjes et léjhaedjes sol sistinme di fitchîs dvèt esse sincrones.

en: All data on this partition should be backed-up
target: Totes les dnêyes so cisse pårticion chal dvèt esse schapêyes

en: All incidents will be followed up by a single qualified MandrakeSoft technical expert.
target: Tos les incidints sront shuvous pa èn espert cwålifyî di MandrakeSoft.

en: All languages
target: Tos les lingaedjes

en: All primary partitions are used
target: Totes les pårticions sont ocupêyes

en: All remote machines
target: Totes les éndjoles då lon

en: Allow Thin Clients
target: Permete les tenes cliyints

en: Allow X Window connections
target: Permete les raloyaedjes X Window

en: Allow all users
target: Permete tos les uzeus

en: Allow an ordinary user to mount the file system. The
    name of the mounting user is written to mtab so that he can unmount the file
    system again. This option implies the options noexec, nosuid, and nodev
    (unless overridden by subsequent options, as in the option line
    user,exec,dev,suid ).
target: Permete li montaedje do sistinme di fitchîs pa èn uzeu normå.
    Li no di l' uzeu k' fwait l' montaedje est scrît dins li fitchî mtab
    come çoula i l' pout dismonter.
    Cisse tchuze chal implike les tchuzes «noexec», «nosuid» eyet «nodev»
    (a moens k' ele soeyexhe discandjeyes pa des tchuzes shuvantes come
    avou l' roye di tchuzes «user,exec,dev,suid»).

en: Allow local hardware
    configuration.
target: Permete l' apontiaedje
    del éndjolreye locåle.

en: Allow remote root login
target: Permete des elodjaedjes då lon po root

en: Allow/Forbid X connections:
    
    - ALL (all connections are allowed),
    
    - LOCAL (only connection from local machine),
    
    - NONE (no connection).
target: Permete/nén permete les raloyaedjes X11:
    
    - ALL (tos les raloyaedjes sont permetous),
    
    - LOCAL (rén k' les raloyaedjes del éndjole locåle),
    
    - NONE (nou raloyaedje).

en: Allow/Forbid autologin.
target: Permete/nén permete l' elodjaedje otomatike.

en: Allow/Forbid direct root login.
target: Permete ou nén l' elodjaedje locå po root.

en: Allow/Forbid reboot by the console user.
target: Permete/Èn nén permete li renondaedje pa l' uzeu sol conzôle.

en: Allow/Forbid remote root login.
target: Permete ou nén les elodjaedjes då lon po root.

en: Allow/Forbid the list of users on the system on display managers (kdm and gdm).
target: Håyner ou nén li djivêye des uses do sistinme ezès manaedjeus di håynaedje (kdm eyet gdm).

en: Alt and Shift keys simultaneously
target: Alt eyet Shift e minme tins

en: Alternative drivers
target: Mineus alternatifs

en: Alternative test page (A4)
target: Pådje di saye alternative (grandeu A4)

en: Alternative test page (Letter)
target: Pådje di saye alternative (grandeu «letter»)

en: Alternatively, you can specify a device name/file name in the input line
target: Ou vos ploz ossu dner on no d' fitchî ou d' éndjin sol roye d' intrêye.

en: American Samoa
target: Samowa amerikinne

en: Amusement programs: arcade, boards, strategy, etc
target: Programes pasmints d' tins: årcåde, plateas, stratedjeye, evnd.

en: An error occurred
target: Dj' aroke so ene sacwè

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
target: Ene sacwè n' a nén stî: dji n' a trové nou valåbe éndjin po fé des noveas sistinmes di fitchîs. Loukîz vos éndjolreyes po saveur çou ki n' va nén

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
target: Åk n' a nén stî, et dji n' sai cmint m' saetchî l' cou foû des
    strons. Si vos continuwez, vos duvroz tirer vosse plan tot seu.

en: An error occurred:
    %s
    Try to change some parameters
target: Åk n' a nén stî:
    %s
    Sayîz di candjî sacwants parametes

en: An online platform to respond to enterprise support needs.
target: Ene platfôme so fyis po responde a çou k' les cpagneyes ont specificmint dandjî

en: Anacron is a periodic command scheduler.
target: Anacron manaedje des comandes a enonder periodicmint.
    I ravize a «cron» mins po des sistinmes ki n' sont nén en alaedje
    24e/24e. Anacron si tchedje di s' mete a djoû et d' enonder les tårdjowès
    comandes cwand l' éndjole est enondêye.

en: And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos.
target: Avou Mandrake Linux 9.2 vos ploz eployî les dierins programes po djower des fitchîs di son, aspougnî eyet håyner vos imådjes ou fotos, et djower des films

en: Andorra
target: Andorre

en: Another one
target: Èn ôte

en: Antarctica
target: Antartike

en: Any partitions that have been newly defined must be formatted for use
    (formatting means creating a file system).
    
    At this time, you may wish to reformat some already existing partitions to
    erase any data they contain. If you wish to do that, please select those
    partitions as well.
    
    Please note that it is not necessary to reformat all pre-existing
    partitions. You must reformat the partitions containing the operating
    system (such as "/", "/usr" or "/var") but you do not have to
    reformat partitions containing data that you wish to keep (typically
    "/home").
    
    Please be careful when selecting partitions. After formatting, all data on
    the selected partitions will be deleted and you will not be able to recover
    it.
    
    Click on "%s" when you are ready to format partitions.
    
    Click on "%s" if you want to choose another partition for your new
    Mandrake Linux operating system installation.
    
    Click on "%s" if you wish to select partitions that will be checked for
    bad blocks on the disk.
target: I gn a mezåjhe, po les pleur eployî, d' abwesner les pårticions ki vnèt
    d' esse askepieyes (abwesner vout dire fé on sistinme di fitchîs).
    
    Asteure, vos vloz motoit ossu rabwesner des pårticions k' egzistèt ddja,
    po disfacer çou k' ele ont å dvins et raveur del plaece. Si vos vloz fé
    çoula, i vs fåt tchoezi eto les pårticions ki vos vloz rabwesner.
    
    Notez ki c' est nén mezåjhe di rabwesner totes les pårticions k' egzistèt
    ddja. I vs fåt seulmint rabwesner les pårticions ki vos î copeyroz li
    sistinme d' operance (dj' ô bén, les pårticions ki sront montêyes
    come « / », « /usr » ou « /var  ») mins vos n' dvoz nén l' fé
    po les pårticions k' ont les dnêyes (tipicmint « /home »).
    
    Fijhoz bén atincion å moumint d' tchoezi les pårticions.
    On côp l' abwesnaedje fwait, totes les dnêyes del pårticion sront
    pierdowes; vos n' les pôroz nén rapexhî.
    
    Clitchîz so «%s» cwand vos estoz presse po l' abwesnaedje des
    pårticions.
    
    Clitchîz so «%s» si vos vloz tchoezi ene ôte pårticion po-z astaler
    vosse novea sistinme d' operance Mandrake Linux.
    
    Clitchîz so «%s» si vos vloz tchoezi les pårticions ki sront
    verifieyes po vey s' i gn a des måvas blocs sol deure plake.

en: Apache World Wide Web Server
target: Sierveu waibe Apache

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
target: Apache est on sierveu HTTP. Il est eployî po siervi des pådjes waibe et des CGI.

en: Apache, Pro-ftpd
target: Apache eyet Pro-ftpd

en: Append
target: Bouter å coron

en: Application:
target: Programe:

en: Apply
target: Mete en ouve

en: Apply filter
target: Mete en alaedje li passete

en: April
target: Avri

en: Arabic
target: Arabe

en: Are you sure that you want to set up printing on this machine?
target: Estoz vs seur di voleur apontyî l' eprimaedje so ciste éndjole chal?

en: Area:
target: Redjon:

en: Argentina
target: Årdjintene

en: Armenia
target: Årmeneye

en: Armenian (old)
target: Årmenyinne (viye modêye)

en: Armenian (phonetic)
target: Årmenyinne (fonetike)

en: Armenian (typewriter)
target: Årmenyinne (novele modêye)

en: Aruba
target: Arouba

en: As a review, DrakX will present a summary of information it has about your
    system. Depending on your installed hardware, you may have some or all of
    the following entries. Each entry is made up of the configuration item to
    be configured, followed by a quick summary of the current configuration.
    Click on the corresponding "%s" button to change that.
    
     * "%s": check the current keyboard map configuration and change that if
    necessary.
    
     * "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
    
     * "%s": By default, DrakX deduces your time zone based on the country
    you have chosen. You can click on the "%s" button here if this is not
    correct.
    
     * "%s": check the current mouse configuration and click on the button to
    change it if necessary.
    
     * "%s": clicking on the "%s" button will open the printer
    configuration wizard. Consult the corresponding chapter of the ``Starter
    Guide'' for more information on how to setup a new printer. The interface
    presented there is similar to the one used during installation.
    
     * "%s": if a sound card is detected on your system, it is displayed
    here. If you notice the sound card displayed is not the one that is
    actually present on your system, you can click on the button and choose
    another driver.
    
     * "%s": by default, DrakX configures your graphical interface in
    "800x600" or "1024x768" resolution. If that does not suit you, click on
    "%s" to reconfigure your graphical interface.
    
     * "%s": if a TV card is detected on your system, it is displayed here.
    If you have a TV card and it is not detected, click on "%s" to try to
    configure it manually.
    
     * "%s": if an ISDN card is detected on your system, it will be displayed
    here. You can click on "%s" to change the parameters associated with the
    card.
    
     * "%s": If you want to configure your Internet or local network access
    now.
    
     * "%s": this entry allows you to redefine the security level as set in a
    previous step ().
    
     * "%s": if you plan to connect your machine to the Internet, it's a good
    idea to protect yourself from intrusions by setting up a firewall. Consult
    the corresponding section of the ``Starter Guide'' for details about
    firewall settings.
    
     * "%s": if you wish to change your bootloader configuration, click that
    button. This should be reserved to advanced users.
    
     * "%s": here you'll be able to fine control which services will be run
    on your machine. If you plan to use this machine as a server it's a good
    idea to review this setup.
target: Chal sont prezintés sacwants parametes k' ont a vey avou voste éndjole.
    Sorlon çou k' vos avoz come éndjolreye vos voeroz, ou nén, ene ou sacwantes
    des intrêyes shuvantes. Tchaeke intrêye est fwaite avou l' no do cayet
    a-z apontyî, shuvowe d' on rascourti di l' apontiaedje do moumint.
    Clitchîz sol boton «%s» corespondant si vos l' vloz candjî.
    
     * «%s»: verifyîz l' apontiaedje del taprece et clitchîz sol boton
    pol candjî, s' i fåt.
    
     * «%s»: verifyîz ki l' tchuze est bén l' bone. Si vos dmorez dins
    èn ôte payis, clitchîz sol boton «%s» po ndè tchoezi èn ôte.
    Si vosse payis n' est nén e l' prumire djivêye di håynêye, clitchîz sol
    boton «%s» po-z aveur li djivêye en etir di tos les payis del Daegn.
    
     * «%s»: Li prémetowe coisse d' eureye est tchoezeye pa
    DrakX sorlon li lingaedje/payis ki vs avoz tchoezi. Vos ploz clitchî
    sol boton «%s» po-z apontyî vosse ôrlodje avou l' eure locåle del
    plaece wice ki vos dmorez si l' prémetowe valixhance n' est nén coreke.
    
     * «%s»: verifyîz l' apontiaedje del sori eyet clitchîz sol boton pol
    candjî, s' i fåt.
    
     * «%s»: si vos clitchîz so «%s» çoula enondrè li macrea
    d' apontiaedje des scrireces. Loukîz li tchaptrea corespondant do «Guide
    d' Enondaedje» po pus d' informåcions sol manire d' apontyî ene nouve
    sicrirece. L' eterface prezintêye chal rishonne a cene håynêye tins
    di l' astalåcion.
    
     * «%s»: si ene cåte son est detectêye so vosse sistinme, ele srè
    metowe chal. Si c' est nén l' cene ki vos avoz, vos ploz clitchî chal
    po tchoezi èn ôte mineu.
    
     * «%s»: li prémetowe finté ki DrakX definixhe po l' eterface
    grafike est di 800x600 oudonbén 1024x768, sorlon voste éndjolreye.
    Si ça n' vos va nén, clitchîz sol boton «%s» pol rapontyî.
    
     * «%s»: si ene cåte tévé est detectêye so vosse sistinme, ele srè
    metowe chal. Si ele n' est nén detctêye, clitchîz sol boton «%s»
    po sayî del apontyî al mwin.
    
     * «%s»: si ene cåte RDIS (ISDN) est detectêye so vosse sistinme,
    ele srè metowe chal. Vos ploz clitchî sol boton «%s» po candjî ses
    parametes.
    
     * «%s»: Si vos vloz apontyî li rantoele (locåle ou daegnrece),
    clitchîz so ç' boton chal.
    
     * «%s»: ciste intrêye chal vos permete di rdefini l' livea
    di såvrité, té k' il a stî defini dins l' etape di dvant.
    
     * «%s»: si vos tuzes a raloyî voste éndjole al rantoele daegnrece,
    c' est ene bone idêye di vs protedjî des hacneus avou on sistinme côpe feu.
    Léjhoz li seccion corespondante do «Guide d' Enondaedje» po-z aveur di pus
    di detays so ls apontiaedjes do côpe feu.
    
     * «%s»: si vos vloz candjî l' apontiaedje di l' enondrece
    di l' éndjole. Vos nel duvrîz fé ki si vos estoz seur di vos.
    
     * «%s»: vos pôroz controler finmint les kés siervices ki vos vloz
    enonder so voste éndjole. Si vos l' vloz eployî po fé do sierveu c' est
    ene bone idêye di candjî et d' verifyî les valixhances chal.

en: Assign host name from DHCP address
target: Assiner li no d' lodjoe a pårti del adresse DHCP

en: Assign raw devices to block devices (such as hard drive
    partitions), for the use of applications such as Oracle or DVD players
target: Assinaedje di peur éndjins (raw devices) po les éndjins di sôre blok (come
    les pårticions des deurès plakes), po des programas come Oracle
    ou des léjheus d' plakes lazer DVD s' endè siervi

en: At the time you are installing Mandrake Linux, it is likely that some
    packages have been updated since the initial release. Bugs may have been
    fixed, security issues resolved. To allow you to benefit from these
    updates, you are now able to download them from the Internet. Check "%s"
    if you have a working Internet connection, or "%s" if you prefer to
    install updated packages later.
    
    Choosing "%s" will display a list of places from which updates can be
    retrieved. You should choose one nearer to you. A package-selection tree
    will appear: review the selection, and press "%s" to retrieve and install
    the selected package(s), or "%s" to abort.
target: Å moumint ki vos astalez Mandrake Linux, i s' pout bén k' i gn åye
    des pacaedjes k' ont stî metous a djoû dispoy li moumint do fijhaedje
    del distribucion. Motoit k' des bugs ont stî coridjîs, ou des problinmes
    di såvrité. Por vos profiter di ces metaedjes a djoû, on vs propôze
    d' aberweter di so l' daegntoele les metaedjes a djoû k' i pout gn aveur.
    Tchoezixhoz «%s» si vos avoz on raloyaedje al daegntoele en alaedje, ou
    «%s» si vos inmez mî d' ratinde et fé les metaedjes a djoû pus tård.
    
    Si vos tchoezixhoz «%s», i gn årè ene djivêye des plaeces di wice k' on
    pout prinde les metaedjes a djoû ki vs serè mostrêye. Tchoezixhoz li plaece
    li pus près d' vos. Adonpu, èn åbe di tchoezixhaedje des pacaedjes
    aparetrè: verifyîz l' tchuze, et clitchîz so «%s» po-z aberweter
    ey astaler les tchoezi(s) pacaedje(s), oudonbén clitchîz so «%s»
    po leyî ouve.

en: At this point, DrakX will allow you to choose the security level desired
    for the machine. As a rule of thumb, the security level should be set
    higher if the machine will contain crucial data, or if it will be a machine
    directly exposed to the Internet. The trade-off of a higher security level
    is generally obtained at the expense of ease of use.
    
    If you do not know what to choose, stay with the default option.
target: Chal, c' est po tchoezi l' livea di såvrité ki vos vloz po voste éndjole.
    Ene rîle simpe c' est ki pus voste éndjole est egzposêye, pus les dnêyes
    k' i gn a å dvins sont impôrtantes, pus li livea di såvrité doet esse hôt.
    Mins ossu, on hôt livea di såvrité çoula vout dire ki c' est moens åjhey
    d' eployî li copiutrece.
    
    Si vos n' savoz cwè tchoezi, leyîz li prémetou livea.

en: At this point, you need to choose which partition(s) will be used for the
    installation of your Mandrake Linux system. If partitions have already been
    defined, either from a previous installation of GNU/Linux or by another
    partitioning tool, you can use existing partitions. Otherwise, hard drive
    partitions must be defined.
    
    To create partitions, you must first select a hard drive. You can select
    the disk for partitioning by clicking on ``hda'' for the first IDE drive,
    ``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
    
    To partition the selected hard drive, you can use these options:
    
     * "%s": this option deletes all partitions on the selected hard drive
    
     * "%s": this option enables you to automatically create ext3 and swap
    partitions in the free space of your hard drive
    
    "%s": gives access to additional features:
    
     * "%s": saves the partition table to a floppy. Useful for later
    partition-table recovery if necessary. It is strongly recommended that you
    perform this step.
    
     * "%s": allows you to restore a previously saved partition table from a
    floppy disk.
    
     * "%s": if your partition table is damaged, you can try to recover it
    using this option. Please be careful and remember that it doesn't always
    work.
    
     * "%s": discards all changes and reloads the partition table that was
    originally on the hard drive.
    
     * "%s": unchecking this option will force users to manually mount and
    unmount removable media such as floppies and CD-ROMs.
    
     * "%s": use this option if you wish to use a wizard to partition your
    hard drive. This is recommended if you do not have a good understanding of
    partitioning.
    
     * "%s": use this option to cancel your changes.
    
     * "%s": allows additional actions on partitions (type, options, format)
    and gives more information about the hard drive.
    
     * "%s": when you are finished partitioning your hard drive, this will
    save your changes back to disk.
    
    When defining the size of a partition, you can finely set the partition
    size by using the Arrow keys of your keyboard.
    
    Note: you can reach any option using the keyboard. Navigate through the
    partitions using [Tab] and the [Up/Down] arrows.
    
    When a partition is selected, you can use:
    
     * Ctrl-c to create a new partition (when an empty partition is selected)
    
     * Ctrl-d to delete a partition
    
     * Ctrl-m to set the mount point
    
    To get information about the different file system types available, please
    read the ext2FS chapter from the ``Reference Manual''.
    
    If you are installing on a PPC machine, you will want to create a small HFS
    ``bootstrap'' partition of at least 1MB which will be used by the yaboot
    bootloader. If you opt to make the partition a bit larger, say 50MB, you
    may find it a useful place to store a spare kernel and ramdisk images for
    emergency boot situations.
target: Chal, vos dvoz tchoezi so kéne/kénès pårticion(s) ki vos voloz astaler
    vosse sistinme Mandrake Linux. Si vos pårticions ont ddja stî fwaites
    (p. egz. li dierin côp ki vos avoz astalé GNU/Linux ou bén avou ene ôte
    usteye di pårtixhaedje), vos les ploz eployî. Ôtrumint, des pårticions dvèt
    esse defineyes so vosse deure plake. Ça vout dire ki vos alez dispårti
    lodjicmint li deure plake di voste éndjole e diferinnes coines separêyes
    di ene l' ôte.
    
    Po fé les pårticions, vos dvoz d' aprume tchoezi li plake a pårti e
    clitchant so «hda» pol prumire plake IDE, «hdb» pol deujhinme, «sda» pol 
    prumire plake SCSI, et vos nd åroz.
    
    Pol pårtixhaedje del deure plake tchoezeye, vos ploz prinde ene di ces
    tchuzes chal:
    
       * «%s»: cisse tchuze va disfacer totes les pårticions k' i gn a sol tchoezeye deure plake.
    
       * «%s»: cisse tchuze va fé des pårticions Ext2 pol sistinme et ene di swap e prindant li plaece di libe k' i gn a sol deure plake et carculant otomaticmint li grandeu li meyeuse.
    
    «%s» dene des ôtes tchuzes, pus spepieuses:
    
       * «%s»: po schaper li tåvlea di pårtixhaedje
    so ene plakete. Ahessåve pol poleur rapexhî pus tård, s' i fåt.
    C' est hôtmint ricmandé del fé.
    
       * «%s»: vos permete di rapexhî
    on tåvlea di pårtixhaedje k' a stî schapé so plakete d' avance.
    
       * «%s»: si vosse tåvlea di pårtixhaedje est crombe, vos ploz sayî del rapexhî avou cisse tchuze chal. Prindoz asteme et rimimbrez vs ki çoula pout ni nén roter a tos les côps.
    
       * «%s»: Cisse tchuze chal c' est si vos
    vloz disfé tos les candjmints et tcherdjî vosse tåvlea di pårtixhaedje
    di dpårt.
    
       * «%s»: disclitchîz cisse tchuze
    chal si vos n' voloz nén ki les bodjåves sopoirts (plakes lazer,
    plaketes,...) soeyexhe montés otomaticmint mins l' fé al mwin.
    
       * «%s»: Si vos vloz aveur l' aidance d' on macrea po fé li pårtixhaedje del deure plake, vos ploz tchoezi cisse tchuze chal. Ele est ricomandêye si vos n' estoz nén on spepieus e pårtixhaedje.
    
       * «%s»: clitchîz so ci boton la po disfé tos vos candjmints.
    
       * «%s»: vos dene des ôtès tchuzes po les
    pårticions (sôre, tchuzes, abwesnaedje) eyet dene pus d' informåcions
    sol deure plake.
    
       * «%s»: on côp ki vos avoz fini li pårtixhaedje del deure plake, tchoezixhoz çouchal po schaper po d' bon les candjmints.
    
    Cwand vos dnez l' grandeu del pårticion, vos l' poloz tchoezi finmint avou
    les tapes fretches di vosse taprece.
    Note: vos ploz tot fé pår avou l' taprece: naivyîz d' ene pårticion a l' ôte avou li tape Tab et les fretches Up/Down.
    
    Cwand ene pårticion a stî tchoezeye, vos poloz fé:
    
         * Ctrl-C  po fé ene novele pårticion (cwand c' est ene vude pårticion k' a stî tchoezeye)
    
         * Ctrl-d  po disfacer li pårticion
    
         * Ctrl-m  po defini li pont di montaedje
    
    Po-z aveur des informåcions so les diferins sistinmes di fitchîs k' i gn a,
    léjhoz li tchaptrea so «ext2FS» do «Manuel di Referince».
    
    Si vos alez astaler sor ene éndjole PPC, motoit ki vos voroz fé ene pitite pårticion HFS «d' enondaedje» di 1 Mo å moens po l' eployî avou l' enondrece «yaboot». Si vos decidez del fé on pô pus grande, par egzimpe 50 Mo, çoula pôreut fé ene clapante plaece po-z î mete on nawea et ene imådje ramdisk po des cas d' urdjince k' i gn åreut.

en: At this point, you need to decide where you want to install the Mandrake
    Linux operating system on your hard drive. If your hard drive is empty or
    if an existing operating system is using all the available space you will
    have to partition the drive. Basically, partitioning a hard drive consists
    of logically dividing it to create the space needed to install your new
    Mandrake Linux system.
    
    Because the process of partitioning a hard drive is usually irreversible
    and can lead to lost data if there is an existing operating system already
    installed on the drive, partitioning can be intimidating and stressful if
    you are an inexperienced user. Fortunately, DrakX includes a wizard which
    simplifies this process. Before continuing with this step, read through the
    rest of this section and above all, take your time.
    
    Depending on your hard drive configuration, several options are available:
    
     * "%s": this option will perform an automatic partitioning of your blank
    drive(s). If you use this option there will be no further prompts.
    
     * "%s": the wizard has detected one or more existing Linux partitions on
    your hard drive. If you want to use them, choose this option. You will then
    be asked to choose the mount points associated with each of the partitions.
    The legacy mount points are selected by default, and for the most part it's
    a good idea to keep them.
    
     * "%s": if Microsoft Windows is installed on your hard drive and takes
    all the space available on it, you will have to create free space for
    Linux. To do so, you can delete your Microsoft Windows partition and data
    (see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT
    partition. Resizing can be performed without the loss of any data, provided
    you have previously defragmented the Windows partition and that it uses the
    FAT format. Backing up your data is strongly recommended.. Using this
    option is recommended if you want to use both Mandrake Linux and Microsoft
    Windows on the same computer.
    
       Before choosing this option, please understand that after this
    procedure, the size of your Microsoft Windows partition will be smaller
    then when you started. You will have less free space under Microsoft
    Windows to store your data or to install new software.
    
     * "%s": if you want to delete all data and all partitions present on
    your hard drive and replace them with your new Mandrake Linux system,
    choose this option. Be careful, because you will not be able to undo your
    choice after you confirm.
    
       !! If you choose this option, all data on your disk will be deleted. !!
    
     * "%s": this will simply erase everything on the drive and begin fresh,
    partitioning everything from scratch. All data on your disk will be lost.
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "%s": choose this option if you want to manually partition your hard
    drive. Be careful -- it is a powerful but dangerous choice and you can very
    easily lose all your data. That's why this option is really only
    recommended if you have done something like this before and have some
    experience. For more instructions on how to use the DiskDrake utility,
    refer to the ``Managing Your Partitions '' section in the ``Starter
    Guide''.
target: Asteure, vos dvoz tchoezi wice ki vos vloz astaler vosse sistinme
    d' operance Mandrake Linux so vosse deure plake. Si l' plake est vude,
    ou si les sistinmes d' operance k' i gn a ddja prindèt tote li plaece,
    vos avoz mezåjhe del pårti. Fé on pårtixhaedje d' ene deure plake çoula
    vout dire del pårti lodjicmint po fé del plaece po-z astaler vosse novea
    sistinme Mandrake Linux.
    
    Come, on côp ki li pårtixhaedje est fwait, on n' sait rivni en erî
    (normålmint), les apurdisses ont sovint sogne ou peu di s' enonder.
    Awoureuzmint, i gn a on macrea ki vs aidrè po l' fé.
    Divant di cmincî, léjhoz cisse seccion chal en etir, et sortot purdoz
    bén vosse tins.
    
    Sorlon l' apontiaedje di vosse deure plake, pluzieurès solucions
    sont possibes:
    
     * «%s»: çouchal frè tot simplumint on pårtixhaedje
    otomatike del plaece vude so les deures plakes da vosse;
    vos n' avoz a vos prewocuper di rén après.
    
     * «%s»: li macrea a detecté ene ou pus di
    pårticions Linux k' egzistèt ddja so vosse deure plake.
    Si vos les vloz wårder, prindoz cisse tchuze chal.
    On vs dimandrè adon di tchoezi les ponts di montaedje des pårticions,
    les vîs ponts di montaedjes sront metous come prémetowès valixhances,
    et pol pus grande pårt c' est ene bone idêye delzès wårder.
    
     * «%s»: si Microsoft Windows est
    astalé so vosse deure plake et s' i prind tote li plaece k' i gn a,
    vos dvoz fé del plaece libe po les dnêyes di Linux. Po çoula vos ploz
    disfacer li pårticion Microsoft Windows et totes ses dnêyes (veyoz les
    solucions «Disfacer li plake etire») oudonbén raptiti vosse pårticion
    FAT di Microsoft Windows.
    Li candjmint d' grandeu des pårticions si pout fé sins piede des dnêyes,
    a condicion del disfragminter d' aprume, eyet kel pårticion soeye ene
    pårticion FAT. C' est hôtmint ricmandé di fé ene copeye di såvrité.
    Cisse solucions est ricmindêye si vos vloz eployî Mandrake Linux et
    Microsoft Windows sol minme copiutrece.
    
    Divant di tchoezi cisse solucion, i vos fåt comprinde kel grandeu di vosse
    pårticion Microsoft Windows srè pus ptite ki çk' ele est asteure.
    Dj' ô bén, vos åroz moens di plaece libe so Microsoft Windows po wårder
    les dnêyes da vosse ou astaler des noveas programes.
    
     * «%s»: si vos vloz disfacer totes les dnêyes k' i gn a
    so vosse deure plake po mete el plaece li sistinme Mandrake Linux,
    vos ploz tchoezi cisse tchuze chal.
    Prindoz asteme k' avou cisse solucion chal vos n' pôroz nén rivni en erî
    on côp ki vos avoz acertiné vosse tchuze.
    
      !! Avou cisse tchuze chal, totes les dnêyes del deure plake sront pierdowes !!
    
     * «%s»: çouchal va simplumint disfacer ttafwait sol
    deure plake eyet cmincî on novea pårtixhaedje. Totes les dnêyes sol
    deure plake vont esse pierdowes.
    
      !! Avou cisse tchuze chal, Tot çk' i gn a el deure plake srè pierdou. !!
    
     * «%s»: si vos vloz fé manuwelmint
    li pårtixhaedje del deure plake, vos ploz tchoezi çouchal.
    Mins prindoz asteme, avou cisse solucion chal vos pôroz fé des poujhantès
    mins dandjureusès sacwès.
    Vos ploz åjheymint piede totes vos dnêyes. Adon, ni tchoezixhoz nén
    çouchal, a moens di vormint saveur çou k' vos fjhoz.
    Po pus di racsegnes sol manire d' eployî  l' usteye DrakDisk,
    loukîz li seccion «Manaedjî vos pårticions» do manuel.

en: August
target: Awousse

en: Australia
target: Ostraleye

en: Australian Optus cable TV
target: Cåbe TV Optus d' Ostråleye

en: Austria
target: Ôtriche

en: Authentication
target: Verifiaedje

en: Authentication LDAP
target: Verifiaedje LDAP

en: Authentication NIS
target: Verifiaedje NIS

en: Authentication Windows Domain
target: Otintifiaedje Dominne Windows

en: Authorize all services controlled by tcp_wrappers
target: Otorijhî tos les siervices controlés pa tcp_wrappers

en: Authorize:
    
    - all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to "ALL",
    
    - only local ones if set to "LOCAL"
    
    - none if set to "NONE".
    
    To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5)).
target: Otorijhî:
    
    - tos les siervices controlés pa tcp_wrappers (voeyoz li pådje di man hosts.deny(5)) si l' valixhance est metow a «ALL» (tos),
    
    - rén k' les siervices locås si l' valixhance est metowe a «LOCAL»,
    
    - nou siervice si l' valixhance est metow a «NONE» (nouk).
    
    Po-z otorijhî les siervices ki vos nd avoz mezåjhe, eployîz /etc/hosts.allow (voeyoz li pådje di man hosts.allow(5)).

en: Authors:
target: Oteurs:

en: Auto Install
target: Astalaedje otomatike

en: Auto Install Configurator
target: Apontieu di l' astalaedje otomatike

en: Auto allocate
target: Grandeu otomatike

en: Auto-detect
target: Deteccion otomatike

en: Auto-detect available ports
target: Oto-detecter les pôrts k' i gn a

en: Auto-detect printers connected directly to the local network
target: Oto-deteccion des scrireces raloyeyes directumint sol rantoele locåle

en: Auto-detect printers connected to machines running Microsoft Windows
target: Oto-deteccion des scrireces raloyeyes a des éndjoles dizo Windows

en: Auto-detect printers connected to this machine
target: Oto-deteccion des scrireces raloyeyes a ciste éndjole chal

en: Auto-detected
target: Detecté otomaticmint

en: Autologin
target: Elodjaedje otomatike

en: Automated
target: Otomatike

en: Automatic IP
target: Adresses IP otomatikes

en: Automatic Steps Configuration
target: Apontiaedje des etapes otomatikes

en: Automatic correction of CUPS configuration
target: Coridjaedje otomatike di l' apontiaedje di CUPS

en: Automatic dependencies
target: Aloyances otomatikes

en: Automatic detection and configuration of hardware at boot.
target: Deteccion et apontiaedje otomatikes del éndjolreye a l' enondaedje.

en: Automatic reconfiguration
target: Rapontiaedje otomatike

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
target: Fé otomaticmint des noveles tiestires do nawea dins /boot
    a pårti di /usr/include/linux/{autoconf,version}.h

en: Automatic time synchronization
target: Sincronijhaedje otomatike del eure

en: Automatic time synchronization (using NTP)
target: Sincronijhaedje otomatike del eure (avou NTP)

en: Automatically find available printers on remote machines
target: Trover otomaticmint les scrireces so des éndjoles då lon

en: Automatically switch on numlock key locker under console
    and XFree at boot.
target: Mete otomaticmint en alaedje li coine des tapes limerikes del taprece
    a l' enondaedje; ossu bén so X11 k' e conzôle.

en: Autoprobe
target: Saye otomatike

en: Available printers
target: Sicrireces k' i gn a

en: Azerbaidjani (latin)
target: Azerbaydjanesse (latene)

en: Azerbaijan
target: Azerbaydjan

en: Backup Now
target: Fé les copeyes di såvrité

en: Backup Other files...
target: Copeye di såvrité d' ôtes fitchîs...

en: Backup System
target: li sistinme etir

en: Backup User files...
target: Copeye di såvrité des fitchîs des uzeus...

en: Backup Users
target: les ridants des uzeus

en: Backup files not found at %s.
target: Les copeyes di såvrité n' ont nén stî trovêyes e %s.

en: Backup system files...
target: Copeye di såvrité des fitchîs sistinme...

en: Backup your System files. (/etc directory)
target: Copeye di såvrité di vos fitchîs sistinme. ( ridant /etc )

en: Backups on unmountable media - Use Catalog to restore
target: Copeyes di såvrité so sopoirt nén montåve - Eployîz l' catalogue po rapexhî

en: Bad backup file
target: Måva fitchî di copeye di såvrité

en: Bad choice, try again
target: Måva tchuze, sayîz co ene feye

en: Bad package
target: Måva pacaedje

en: Bad password on %s
target: Måva scret so %s

en: Bahrain
target: Bahreyn

en: Barbados
target: Barbades

en: Basic
target: Di båze

en: Basic options
target: Tchuzes di båze

en: Be careful: this operation is dangerous.
target: Prindoz asteme: cisse operåcion chal est dandjureuse.

en: Be sure a media is present for the device %s
target: Acertinez vs k' i gn a on sopoirt el léjheu %s

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
target: Come vos fjhoz l' astalaedje a pårti del rantoele, li rantoele est ddja apontieye.
    Clitchîz so «'l est bon» po wårder l' apontiaedje da vosse, ou so  «Rinoncî» po rapontyî li raloyaedje al rantoele.

en: Become a MandrakeExpert
target: Divnoz on espert Mandrake so MandrakeExpert

en: Before continuing, you should carefully read the terms of the license. It
    covers the entire Mandrake Linux distribution. If you do agree with all the
    terms in it, check the "%s" box. If not, simply turn off your computer.
target: Divant d' aler pus avant, vos dvrîz lére atintivmint l' licince.
    Ele covere li distribucion Mandrake Linux, si vos estoz d' acoird
    avou les termes del licince, clitchîz sol boton «%s».
    Ôtrumint, distindoz tot simplumint li copiutrece.

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
target: Avant d' astaler ene fonte, asseurez vs ki vos avoz l' droet di l' eployî et di l' astaler sol sistinme da vosse.
    
    - Vos ploz astaler les fontes del manire normåle. Dins des råres cas, des crombès fontes polèt crasher vosse sierveu X.

en: Belarus
target: Belarûsse

en: Belarusian
target: Bielorusse

en: Belgian
target: Belje

en: Belgium
target: Beljike

en: Bengali
target: Bengalesse

en: Benin
target: Bénin

en: Bermuda
target: Bermude

en: Bhutan
target: Boutan

en: Bolivia
target: Boliveye

en: Books and Howto's on Linux and Free Software
target: Lives et Howtos so GNU/Linux et les libes programes

en: Boot
target: Enondaedje

en: Boot Floppy
target: Plakete d' enondaedje

en: Boot ISO
target: ISO enondåve

en: Boot Protocol
target: Protocole d' enondaedje

en: Boot Style Configuration
target: Apontiaedje del sôre d' enondaedje

en: Boot device
target: Éndjin d' enondaedje

en: Boot disk creation
target: Askepiaedje del plakete d' enondaedje

en: Bootloader
target: Enondrece

en: Bootloader installation
target: Astalaedje di l' enondrece

en: Bootloader installation in progress
target: Dj' astale l' enondrece

en: Bootloader main options
target: Mwaissès tchuzes di l' enondrece

en: Bootloader to use
target: Enondrece a-z eployî

en: Bootsplash
target: Waitroûle d' enondaedje

en: Bosnia and Herzegovina
target: Bosneye

en: Bosnian
target: Bosnyinne

en: Both Alt keys simultaneously
target: Les deus tapes Alt e minme tins

en: Both Control keys simultaneously
target: Les deus tapes Control e minme tins

en: Both Shift keys simultaneously
target: Les deus tapes di Shift e minme tins

en: Bouvet Island
target: Iye Bouvet

en: Brazil
target: Braezi

en: Brazilian (ABNT-2)
target: Braezilyinne (ABNT-2)

en: Bringing down the network
target: Dj' arestêye li rantoele

en: Bringing up the network
target: Metant li rantoele en alaedje

en: Broadcast Address:
target: Adresse di broadcast:

en: Browse
target: Foyter

en: Build All Kernels -->
target: Costrure tos les naweas-->

en: Build Single NIC -->
target: Fé on simpe NIC -->

en: Build Whole Kernel -->
target: Costrure nawea etir -->

en: Build the disk
target: Fé l' plakete

en: Build the future of Linux!
target: Costrujhoz l' avni di Linux!

en: Bulgaria
target: Bulgåreye

en: Bulgarian (BDS)
target: Bulgåre (BDS)

en: Bulgarian (phonetic)
target: Bulgåre (fonetike)

en: Burkina Faso
target: Bourkina Fasso

en: Burundi
target: Bouroundi

en: Bus identification
target: Idintifiaedje do bus

en: Button 2 Emulation
target: Emulåcion do 2inme boton

en: Button 3 Emulation
target: Emulåcion do 3inme boton

en: Button `%s': %s
target: Boton «%s»: %s

en: Buttons emulation
target: Emulåcion des botons

en: C and C++ development libraries, programs and include files
target: Livreyes di programaedje C et C++, programes et fitchîs *.h

en: CD-R / DVD-R
target: Plakes lazer (CDROM/DVDROM)

en: CD/DVD burners
target: Broûleu di CD/DVD

en: CDROM
target: Plake lazer

en: CPU flags reported by the kernel
target: Drapeas CPU rapoirtés på nawea

en: CUPS - Common Unix Printing System
target: CUPS - Li novea sistinme di comon eprimaedje po Unix

en: CUPS configuration
target: Apontiaedje di CUPS

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
target: CUPS ni sopoite nén les scrireces so des sierveus Novell nerén les cenes k' evoyèt les dnêyes so tot l' minme kéne comande.

en: CUPS printer configuration
target: Apontiaedje des scrireces di CUPS

en: Cable connection
target: Raloyaedje viè cåbe TV

en: Cache size
target: Grandeu del muchete

en: Calendar
target: Calindrî

en: Cambodia
target: Cambodje

en: Cameroon
target: Camrone

en: Can only be mounted explicitly (i.e.,
    the -a option will not cause the file system to be mounted).
target: Èn pout esse monté ki specificmint (dj' ô bén, li tchuze « -a  »
    n' a nol efet et n' fwait nén monter li sistinme di fitchîs).

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
target: Dji n' sai vey les modules po vosse nawea (i gn a pont d' fitchî %s), çoula vout probablumint dire ki vosse plakete d' enondaedje n' a nén stî fwait pol sopoirt d' astalaedje ki vos vloz eployî. Vos dvrîz fé ene nouve plakete, a pårti des imådjes ki vnèt avou li modêye di Mandrake Linux ki vos vloz astaler

en: Can't add a partition to _formatted_ RAID md%d
target: Dji n' pout radjouter ene pårticion a on RAID _abwesné_ md%d

en: Can't create catalog!
target: Dji n' sai ahiver on catalogue!

en: Can't create log file!
target: Dji n' sai ahiver l' fitchî di djournå!

en: Can't find %s on %s
target: Dji n' sai trover %s so %s

en: Can't launch mkinitrd -f /boot/initrd-%s.img %s.
target: Dji n' sai enonder mkinitrd -f /boot/initrd-%s.img %s.

en: Can't login using username %s (bad password?)
target: Dji n' a savou vs elodjî dizo l' no %s (måva scret motoit?)

en: Can't make screenshots before partitioning
target: Dji n' pou nén fé des waitroûlêyes divant l' pårtixhaedje

en: Can't open %s!
target: Dji n' sai drovi %s!

en: Can't relaunch LiLo!
    Launch "lilo" as root in command line to complete LiLo theme installation.
target: Dji n' sai renonder lilo!
    Enondez «lilo» come root e l' roye di comande po completer l' astalaedje do tinme di lilo.

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
target: Dji n' såreu dismete li pont di montaedje, ca cisse pårticion est eployeye pol loopback.
    Vos dvoz oister li loopback po cmincî.

en: Can't use broadcast with no NIS domain
target: Dji n' pout eployî li broadcast sins dominne NIS

en: Can't write /etc/sysconfig/bootsplash
    File not found.
target: Dji n' sai scrire /etc/sysconfig/bootsplash
    Li fitchî n' a nén stî trové.

en: Can't write /etc/sysconfig/bootsplash.
target: Dji n' sai scrire /etc/sysconfig/bootsplash.

en: Canada (cable)
target: Canada (cåbe-TV)

en: Canadian (Quebec)
target: Canadyinne (Québec)

en: Cancel
target: Rinoncî

en: Cape Verde
target: Cap Vert

en: CapsLock key
target: Li tape CapsLock

en: Card IO
target: I/R del cåte

en: Card IO_0
target: I/R del cåte (0)

en: Card IO_1
target: I/R del cåte (1)

en: Card IRQ
target: IRQ del cåte

en: Card mem (DMA)
target: Canå DMA del cåte

en: Card model:
target: Modele del cåte:

en: Cayman Islands
target: Iyes Cayman

en: Cd-Rom labeled "%s"
target: CDROM lomé «%s»

en: Central African Republic
target: Republike Cintrafrikinne

en: Chad
target: Tchad

en: Change
    Restore Path
target: Candjî li tchmin
    di rapexhaedje

en: Change Cd-Rom
target: Candjî di plake lazer

en: Change partition type
target: Candjî li sôre del pårticion

en: Change the printing system
target: Candjî li sistinme d' eprimaedje

en: Change type
target: Candjî l' sôre

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
target: Candjîz vosse CDROM!
    
    Metoz li CDROM lomé «%s» dvins l' léjheu, s' i vs plait;
    et clitchîz so «'l est bon» on côp ki c' est fwait.
    Si vos n' l' avoz nén, clitchîz so «Rinoncî» po rinoncî a astaler a pårti
    di ci CDROM chal.

en: Channel
target: Canå

en: Check additions/removals of sgid files
target: Verifyî les radjoutaedjes/oistaedjes di fitchîs suid root.

en: Check additions/removals of suid root files
target: Verifyîe les radjoutaedjes/oistaedjes di fitchîs suid root.

en: Check bad blocks?
target: Verifyî s' i gn a des blocs di måvas?

en: Check empty password in /etc/shadow
target: Verifyî s' i gn a des vudes sicrets e /etc/shadow

en: Check open ports
target: Cweri après les pôrts di drovous

en: Check permissions of files in the users' home
target: Verifyî les permissions des fitchîs ezès ridants måjhon des uzeus

en: Checking %s
target: Verifiant %s

en: Checking device and configuring HPOJ...
target: Verifiaedje les éndjins eyet apontiaedje di HPOJ...

en: Checking installed software...
target: Cwerant après les astalés programes...

en: Checking your system...
target: Verifiant vosse sistinme...

en: Chile
target: Tchili

en: China
target: Chine

en: China (broadcast)
target: Chine (pa waches)

en: Chkconfig obey msec rules
target: Chkconfig schoûte åzès rîles di msec

en: Choose a file
target: Tchoezixhoz on fitchî

en: Choose a mirror from which to get the packages
target: Tchoezixhoz on miroe po nd aberweter des pacaedjes foû

en: Choose a monitor
target: Tchoezixhoz ene waitroûle

en: Choose a partition
target: Tchoezixhoz ene pårticion

en: Choose action
target: Accions

en: Choose an X server
target: Tchoezixhoz on sierveu X

en: Choose an existing LVM to add to
target: Tchoezi on LVM ki egzistêye dedja po î radjouter

en: Choose an existing RAID to add to
target: Tchoezi on RAID ki egzistêye dedja po î radjouter

en: Choose another partition
target: Tchoezixhoz ene ôte pårticion

en: Choose color
target: Tchoezixhoz l' coleur

en: Choose file
target: Tchoezixhoz on fitchî

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
target: Tchoezixhoz e l' djivêye ene des scrireces trovêyes otomaticmint oudonbén rimplixhoz les tchamps avou l' no d' lodjoe ou l' adresse IP et l' limero d' pôrt (prémetou a 9100).

en: Choose packages to install
target: Pacaedjes a astaler

en: Choose the applications that will support the fonts:
target: Tchoezixhoz li programe ki va-st eployî les fontes:

en: Choose the connection you want to configure
target: Tchoezixhoz li raloyaedje ki vos voloz apontyî

en: Choose the default user:
target: Tchoezixhoz li prémetou uzeu:

en: Choose the floppy drive you want to use to make the bootdisk
target: Tchoezixhoz li léjheu di plaketes ki vos voloz eployî po fé li plakete d' enondaedje

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on this partition
    will be lost and will not be recoverable!
target: Tchoezixhoz li deure plake ki vos vloz disfacer po-z î astaler vosse
    novele pårticion Mandrake Linux. Prindoz asteme, totes les dnêyes
    k' i gn a sol deure plake vont esse pierdowes, et vos n' pôroz les rapexhî.

en: Choose the host on which the local scanners should be made available:
target: Tchoezixhoz li lodjoe ki les scanreces locåles dvèt esse metowes come disponibes:

en: Choose the mount points
target: Tchoezixhoz les ponts di montaedje

en: Choose the network interface
target: Tchoezixhoz l' eterface rantoele

en: Choose the network or host on which the local printers should be made available:
target: Tchoezixhoz li rantoele ou l' lodjoe ki les scrireces locåles dvèt î esse disponibes:

en: Choose the new size
target: Tchoezixhoz li novele grandeu

en: Choose the packages you want to install
target: Tchoezixhoz les pacaedjes k' vos voloz astaler

en: Choose the partitions you want to format
target: Tchoezixhoz les pårticions a abwesner

en: Choose the profile to configure
target: Tchoezixhoz li profil a-z apontyî

en: Choose the resolution and the color depth
target: Tchoezixhoz li finté et li parfondeu di coleur

en: Choose the sizes
target: Tchoezixhoz les grandeus

en: Choose the window manager to run:
target: Tchoezixhoz li manaedjeu di purnea a enonder:

en: Choose which services should be automatically started at boot time
target: Tchoezixhoz kés siervices dvèt esse enondés a l' enondaedje do sistinme

en: Choose your CD/DVD device
target: Tchoezixhoz vost éndjin léjheu di CD/DVD

en: Choose your CD/DVD media size (MB)
target: Tchoezixhoz li grandeu (e Mo) di vosse sopoirt CD/DVD

en: Choose your country
target: Tchoezixhoz vosse payis

en: Choose your filesystem encryption key
target: Tchoezixhoz vosse clé d' ecriptaedje pol sistinme di fitchîs

en: Choose your keyboard
target: Tchoezi vosse taprece

en: Choosing a display manager
target: Tchoezixhant on manaedjeu di håynaedje

en: Choosing an arbitrary driver
target: Tchoezixhant tot l' minme ké mineu

en: Christmas Island
target: Iye Christmas

en: Chunk size %s
target: Grandeu des bokets %s

en: Circular mounts %s
target: Betchfessîs montaedjes %s

en: Clean /tmp at each boot
target: Netyî /tmp a tchaeke renondaedje

en: Clear all
target: Tot netyî

en: Click on "%s" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "%s", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "%s" to stop this operation without losing any data and
    partitions present on this hard drive.
target: Clitchîz so «%s» si vos vloz disfacer totes les dnêyes et totes les
    pårticions k' i gn a so vosse deure plake.
    Prindoz asteme, dispoy aveur clitchî so «%s», vos n' pôroz pus rapexhî
    nole dinêye ou pårticion k' i gn aveut sol deure plake, nerén les cis
    da Windows.
    
    Clitchîz so «%s» po rinoncî a cisse operåcion, et leyî les dnêyes
    et les pårticions come ele estént sol deure plake.

en: Click on a device in the left tree in order to display its information here.
target: Clitchî so èn éndjin del djivêye di hintche po-z aveur ses informåcions di håynêyes chal.

en: Clients for different protocols including ssh
target: Cliyints po les protocoles k' i gn a (ssh avou)

en: Close
target: Clôre

en: Collapse Tree
target: Raptiti l' coxhlaedje

en: Colombia
target: Colombeye

en: Color configuration
target: Apontiaedje del coleur

en: Color depth: %s
target: Parfondeu di coleur: %s

en: Coma bug
target: Bug «coma»

en: Command line
target: Roye di cmande

en: Comoros
target: Comores

en: Compact
target: Compak

en: Complete your security setup with this very easy-to-use software which combines high performance components such as a firewall, a virtual private network (VPN) server and client, an intrusion detection system and a traffic manager.
target: Completez vost apontiaedje del såvrité avou ci programe åjhey a-z eployî chal, ki mete eshonne des componints di hôte performance come li côpe feu, dessierveus et cliyints po ene forveyowe rantoele privêye (VPN), on sistinme di deteccion des intruzions eyet on manaedjeu do trafik.

en: Computing FAT filesystem bounds
target: Dji carcule les limites do sistinme di fitchîs FAT

en: Computing the size of the Windows partition
target: Carculant l' grandeu del pårticion Windows

en: Configuration
target: Apontiaedje

en: Configuration Wizards
target: Macreas d' apontiaedje

en: Configuration changed - restart clusternfs/dhcpd?
target: L' apontiaedje a candjî - renonder clusternfs/dhcpd?

en: Configuration is complete, do you want to apply settings ?
target: L' apontiaedje est fini, el voloz vs mete en alaedje?

en: Configuration of a remote printer
target: Apontiaedje d' ene sicrirece å lon

en: Configure
target: Apontyî

en: Configure CUPS
target: Apontyî CUPS

en: Configure CUPS printing system
target: Apontyî li sistinme d' eprimaedje CUPS

en: Configure Internet Access...
target: Apontyî li raloyaedje al rantoele daegnrece...

en: Configure Local Area Network...
target: Apontyî li rantoele locåle...

en: Configure X
target: Apontyî X

en: Configure all heads independently
target: Apontyî totes les waitroûles separumint

en: Configure bootsplash picture
target: Apontyî l' imådje po vey divant li waitroûle d' enondaedje

en: Configure hostname...
target: Apontyî l' no do lodjoe...

en: Configure module
target: Apontyî li module

en: Configure mouse
target: Apontyî li sori

en: Configure networking
target: Apontyî li rantoele

en: Configure only card "%s"%s
target: Apontyî rén kel cåte «%s»%s

en: Configure services
target: Apontyî les siervices

en: Configure the network now
target: Apontyî li rantoele asteure

en: Configured on other machines
target: Apontieyes so ds ôtès éndjoles

en: Configured on this machine
target: Apontieyes so ciste éndjole chal

en: Configuring IDE
target: Apontiant les éndjins IDE

en: Configuring PCMCIA cards...
target: Apontiant les cåtes PCMCIA...

en: Configuring applications...
target: Apontiant les programes...

en: Configuring network
target: Apontiant li rantoele

en: Configuring network device %s
target: Apontiant l' éndjin di rantoele %s

en: Configuring printer "%s"...
target: Apontiant li scrirece «%s»...

en: Configuring printer ...
target: Apontiant li scrirece...

en: Configuring scripts, installing software, starting servers...
target: Apontiant les scripes, astalant les programes, enondant les sierveus...

en: Configuring...
target: Apontiant...

en: Congratulations!
target: Complumints!

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
target: Felicitåcions, l' astalåcion a stî fwaite.
    Bodjîz li sopoirt d' enondaedje et tapez so Return po renonder l' éndjole.
    
    Po des informåcions so les coridjaedjes k' i gn a po cisse modêye di Mandrake Linux,
    loukîz al pådje des Errata sol waibe:
    
    
    %s
    
    
    vos trovroz del informåcion sol apontiaedje do sistinme el tchaptrea
    sol post-astalåcion do Guide di l' Uzeu Mandrake Linux Oficir.

en: Congratulations, the network and Internet configuration is finished.
target: Proficiat, l' apontiaedje del rantoele (locåle et daegnrece) est fini.

en: Connect %s
target: Raloyî %s

en: Connect to the Internet
target: Si raloyî al rantoele daegnrece

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
target: Raloyî vosse sicrirece a on sierveu Linux eyet leyî li(les) éndjole(s) Windows s' î raloyî come des cliyints.
    
    Voloz vs vormint continuwer l' apontiaedje del sicrirece di cisse manire chal?

en: Connect...
target: Si raloyî...

en: Connected
target: Raloyî

en: Connecting to Internet
target: Si raloyant al daegntoele

en: Connection Configuration
target: Apontiaedje do raloyaedje

en: Connection Time:
target: Tins di raloyaedje:

en: Connection Type
target: Sôre di raloyaedje

en: Connection complete.
target: Raloyaedje completé.

en: Connection failed.
    Verify your configuration in the Mandrake Control Center.
target: Li raloyaedje a fwait berwete.
    Verifyîz vost apontiaedje dins l' cinte di contrôle di Mandrake.

en: Connection name
target: No di raloyaedje

en: Connection speed
target: Roedeu do raloyaedje

en: Connection timeout (in sec)
target: Tårdjaedje (e seg) pol raloyaedje

en: Connection type:
target: Sôre di raloyaedje:

en: Console Tools
target: Usteyes pol conzôle

en: Contacting Mandrake Linux web site to get the list of available mirrors...
target: Dj' atôche li waibe da Mandrake Linux po-z aveur li djivêye di miroes k' i gn a

en: Contacting the mirror to get the list of available packages...
target: Dj' atôche li miroe po-z avu l' djivêye des pacaedjes

en: Content of the file
target: Håynaedje do fitchî

en: Continue
target: Continuwer

en: Continue anyway?
target: Voloz vs vormint continuwer?

en: Control and Shift keys simultaneously
target: Control eyet Shift e minme tins

en: Cook Islands
target: Iyes Cook

en: Copy fonts on your system
target: Copyî les fontes so vosse sistinme

en: Copying %s
target: Copiant %s

en: Cote d'Ivoire
target: Coddivwere

en: Could not install the packages needed to set up a scanner with Scannerdrake.
target: Dji n' a savou astaler les pacaedjes k' i gn a mezåjhe po-z apontyî ene sicanrece.

en: Could not install the packages needed to share your scanner(s).
target: Dji n' a savou astaler les pacaedjes k' i gn a mezåjhe po pårtaedjî vos scanrece(s).

en: Couldn't access the floppy!
target: Dji n' a savou aveur accès al plakete!

en: Country / Region
target: Payis/Redjon

en: Cpuid family
target: Famile do cpuid

en: Cpuid level
target: Livea do cpuid

en: Create
target: Askepyî

en: Create a bootdisk
target: Fé ene plakete d' enondaedje

en: Create a new partition
target: Fé ene novele pårticion

en: Create new theme
target: Askepyî on novea tinme

en: Create/Transfer backup keys for SSH
target: Askepyî/transferer les clés po SSH

en: Creating and formatting file %s
target: Dji fwai et abwesner li fitchî %s

en: Creating auto install floppy
target: Dji fé li plakete d' enondaedje otomatike

en: Creating auto install floppy...
target: Dji fé li plakete d' enondaedje otomatike

en: Creating bootdisk...
target: Dji fwai ene plakete d' enondaedje

en: Croatia
target: Crowåceye

en: Croatian
target: Crowåte

en: Cron not available yet as non-root
target: Cron nén co disponibe po les uzeus nén root

en: Ctrl and Alt keys simultaneously
target: Control eyet Alt e minme tins

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
target: Apontiaedje do moumint di «%s»:
    
    Rantoele: %s
    Adresse IP: %s
    Atribucion IP: %s
    Mineu: %s

en: Current interface configuration
target: Apontiaedje del eterface do moumint

en: Current user
target: Uzeu do moumint

en: Currently, no alternative possibility is available
target: I gn a pol moumint nén d' ôte tchuze possibe

en: Custom
target: A vosse môde

en: Custom & system settings
target: Apontiaedjes da vosse et do sistinme

en: Custom Restore
target: Rapexhaedje a vosse môde

en: Custom configuration
target: Apontiaedje da vosse

en: Custom disk partitioning
target: Pårtixhaedje da vosse del deure plake

en: Custom settings
target: Apontiaedjes da vosse

en: Cylinder %d to %d
target: Do cilinde %d å cilinde %d

en: Cyprus
target: Chipre

en: Czech (QWERTY)
target: Tcheke (QWERTY)

en: Czech (QWERTZ)
target: Tcheke (QWERTZ)

en: Czech Republic
target: Tchekeye

en: DHCP Client
target: Cliyint DHCP

en: DHCP Server Configuration.
    
    Here you can select different options for the DHCP server configuration.
    If you don't know the meaning of an option, simply leave it as it is.
target: Apontiaedje do sierveu DHCP.
    
    Chal vos ploz tchoezi sacwantès tchuzes po l' apontiaedje do sierveu DHCP.
    Si vos n' kinoxhoz nén li sins d' ene tchuze, leyîz l' simplumint come ele est.

en: DHCP client
target: Cliyint DHCP

en: DHCP host name
target: No di lodjoe po DHCP

en: DNS server
target: Sierveu DNS

en: DNS server address should be in format 1.2.3.4
target: L' adresse IP do sierveu DNS doet esse del cogne 1.2.3.4

en: DOS drive letter: %s (just a guess)
target: Lete del plake DOS: %s (dji saye d' adviner)

en: DVD-R device
target: Éndjin DVDR

en: DVDRAM device
target: Éndjin DVDRAM

en: Daily security check
target: Verifiaedjes di såvrité tchaeke djoû

en: Danish
target: Daenwesse

en: Database
target: Sierveu, båzes di dnêyes

en: Database Server
target: Sierveu di båze di dnêyes

en: Day
target: Djoû

en: Deactivate now
target: Essocter do côp

en: December
target: Decimbe

en: Default
target: Prémetou

en: Default OS?
target: Prémetou sistinme d' operance?

en: Default desktop
target: Prémetou scribanne

en: Default printer
target: Prémetowe sicrirece

en: Default user
target: Prémetowe uzeu

en: Del profile...
target: Disfacer profil...

en: Delay before booting default image
target: Tins divant d' enonder li prémetowe imådje

en: Delay before booting the default image
target: Tins divant d' enonder li prémetowe imådje

en: Delete
target: Disfacer

en: Delete All NBIs
target: Disfacer tos les NBI

en: Delete Client
target: Disfacer cliyint

en: Delete Hard Drive tar files after backup to other media.
target: Disfacer les fitchîs tar del deure plake on côp k' il ont stî copyîs so èn ôte sopoirt.

en: Delete profile
target: Disfacer profil

en: Delete selected printer
target: Disfacer li tchoezeye sicrirece

en: Delete selected rule
target: Disfacer li tchoezeye rîle

en: Denmark
target: Daenmåtche

en: Depending on the default language you chose in Section , DrakX will
    automatically select a particular type of keyboard configuration. However,
    you may not have a keyboard that corresponds exactly to your language: for
    example, if you are an English speaking Swiss person, you may have a Swiss
    keyboard. Or if you speak English but are located in Quebec, you may find
    yourself in the same situation where your native language and keyboard do
    not match. In either case, this installation step will allow you to select
    an appropriate keyboard from a list.
    
    Click on the "%s" button to be presented with the complete list of
    supported keyboards.
    
    If you choose a keyboard layout based on a non-Latin alphabet, the next
    dialog will allow you to choose the key binding that will switch the
    keyboard between the Latin and non-Latin layouts.
target: Sorlon li tchuze do lingaedje,  DrakX va tchoezi otomaticmint li bone taprece por vos. Mins, i s' pout ki vos åyoxhe ene taprece diferinne: par egzimpe, ene djin ki djåzreut inglès mins vicreut el Swisse, ele voreut cwand minme ene swisse taprece. Oudonbén si vos avoz tchoezi l' walon mins ki vos avoz ene taprece francesse ou qwerty purade k' ene taprece belje. Dins les deus cas, vos pôroz candjî vosse tchuze a l' etape «Rascourti éndjolreye» pus lon, et tchoezi l' cene ki vos vloz dins en ene djivêye.
    
    Clitchîz so «%s» po-z aveur li djivêye etire di totes les tapreces ki sont sopoirtêyes.
    Si vos tchoezixhoz ene taprece po èn alfabet nén latén, li purnea shuvant vos denrè l' tchuze des tapes a tchôkî po candjî inte l' alfabet latén eyet l' taprece nén latene.

en: Description
target: Discrijhaedje

en: Description of the fields:
target: Discrijhaedje des tchamps:

en: Detailed information
target: Sipepieuse informåcion

en: Details
target: Po ndè saveur di pus

en: Detected %s
target: %s detecté

en: Detected hardware
target: Éndjolreye di trovêye

en: Detected model: %s
target: Modele detecté: %s

en: Detected model: %s %s
target: Modele detecté: %s %s

en: Detecting devices...
target: Dji deteke les éndjins...

en: Detection in progress
target: Deteccion en alaedje

en: Devanagari
target: Indyinne (Devanagari)

en: Development
target: Programaedje

en: Device
target: Éndjin

en: Device name to use for backup
target: No di l' éndjin a-z eployî po les copeyes di såvrité

en: Device:
target: Éndjin:

en: Dialing mode
target: Môde di houcaedje

en: Dialup options
target: Tchuzes di houcaedje pa modem

en: Did it work properly?
target: Est-ce ki çoula rota comufåt?

en: Direct root login
target: Elodjaedje direk di root

en: Directory %s already contains data
    (%s)
target: Li ridant %s a ddja sacwantès dnêyes
    (%s)

en: Directory (or module) to put the backup on this host.
target: Li ridant (ou module) wice ki les copeyes  di såvrité sont metowes so ç' lodjoe chal.

en: Disable Local Config
target: Dismete l' apontiaedje locå

en: Disable Server
target: Essocter l' sierveu

en: Disabling servers...
target: Dismetant les sierveus...

en: Disconnect %s
target: Disraloyî %s

en: Disconnect...
target: Si disraloyî...

en: Disconnecting from Internet
target: Si disraloyant del daegntoele

en: Disconnection from Internet complete.
target: Disraloyaedje del daegntoele completé.

en: Disconnection from Internet failed.
target: Li disraloyaedje del daegntoele a fwait berwete.

en: Disk
target: Deure plake

en: Display all available remote CUPS printers
target: Håyner totes les scrireces CUPS då lon k' i gn a

en: Display logo on Console
target: Håyner imådjete sol conzôle

en: Display theme
    under console
target: Håyner tinme
    dizo l' conzôle

en: Do
target: Fé

en: Do it later
target: El fé pus tård

en: Do it!
target: El fé!

en: Do not allow execution of any binaries on the mounted
    file system. This option might be useful for a server that has file systems
    containing binaries for architectures other than its own.
target: Èn nén permete d' enonder les programes a pårti do sistinme
    di fitchîs k' a stî monté. Cisse tchuze chal pout esse ahessåve
    po on sierveu d' fitchîs k' a des sistinmes di fitchîs avou des
    programes po d' ôtes sistinmes d' operance.

en: Do not include the browser cache
target: Èn nén inclure li muchete do betchteu

en: Do not interpret character or block special devices on the file system.
target: Èn nén eterpreter les éndjins speciås di sôre bloc ou caractere sol sistinme di fitchîs.

en: Do not print any test page
target: Èn nén rexhe di pådje di saye

en: Do not send mails when unneeded
target: Èn nén evoyî des emiles cwand end a nén mezåjhe

en: Do not transfer printers
target: Nén transferer les scrireces

en: Do not update inode access times on this file system
    (e.g, for faster access on the news spool to speed up news servers).
target: En nén mete a djoû li tins d' dierin léjhaedje des i-nuks so
    ç' sistinme di fitchîs chal (eg: po-z aler pus roed dins on spoule
    d' on sierveu usenet, metans).

en: Do nothing
target: Èn rén fé

en: Do you have an ISA sound card?
target: Avoz vs ene cåte son ISA?

en: Do you have another one?
target: Avoz vs ene ôte?

en: Do you have any %s interfaces?
target: Avoz vs des eterfaces %s?

en: Do you really want to remove the printer "%s"?
target: Voloz vs vormint bodjî foû li scrirece «%s»?

en: Do you want the BackSpace to return Delete in console?
target: Voloz vs kel tape «BackSpace» evoye on «Delete» el conzôle?

en: Do you want to click on this button?
target: Voloz vs clitchî so ç' boton chal?

en: Do you want to enable printing on printers in the local network?
target: Voloz vs mete en alaedje l' eprimaedje so les scrireces sol rantoele locåle?

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
target: Voloz vs mete en alaedje l' eprimaedje so les scrireces chal pa dzeur ou so les scrireces sol rantoele locåle?

en: Do you want to enable printing on the printers mentioned above?
target: Voloz vs mete en alaedje l' eprimaedje so les scrireces chal pa dzeur?

en: Do you want to recover your system?
target: Voloz vs rapexhî vosse sistinme?

en: Do you want to save /etc/fstab modifications
target: Voloz vs wårder les candjmints di /etc/fstab ?

en: Do you want to set this printer ("%s")
    as the default printer?
target: Voloz vs mete cisse sicrirece chal («%s»)
    come li prémetowe sicrirece?

en: Do you want to start a new configuration ?
target: Voloz vs enonder on novea apontiaedje?

en: Do you want to start the connection at boot?
target: Voloz vs vos raloyî a tchaeke côp ki l' éndjole est enondêye?

en: Do you want to test the configuration?
target: Voloz vs sayî l' apontiaedje?

en: Do you want to try to connect to the Internet now?
target: Voloz vs sayî di vos raloyî al rantoele daegnrece asteure?

en: Do you want to use aboot?
target: Voloz vs eployî aboot?

en: Do you want to use this feature?
target: Voloz vs eployî cisse fonccionålité chal?

en: Documentation
target: Documintåcion

en: Does not appear to be recordable media!
target: I shonne ki l' sopoirt n' est nén scrijhåve

en: Domain
target: Dominne

en: Domain Admin Password
target: Sicret do manaedjeu do dominne

en: Domain Admin User Name
target: No di l' uzeu manaedjeu do dominne

en: Domain Authentication Required
target: L' acertinaedje des dominnes est obligatwere

en: Domain Name Resolver
target: Sierveu di nos d' dominne

en: Domain Name Server
target: Sierveu di nos d' dominne

en: Domain Name and Network Information Server
target: Sierveu di nos (DNS) et sierveu djaenès pådjes (NIS)

en: Domain Name:
target: No di dominne:

en: Domain name
target: No di dominne

en: Dominica
target: Dominike

en: Dominican Republic
target: Republike Dominikinne

en: Done
target: Fini

en: Down
target: Dischinde

en: DrakSec Basic Options
target: Tchuzes di båze di DrakSec

en: DrakX will first detect any IDE devices present in your computer. It will
    also scan for one or more PCI SCSI cards on your system. If a SCSI card is
    found, DrakX will automatically install the appropriate driver.
    
    Because hardware detection is not foolproof, DrakX may fail in detecting
    your hard drives. If so, you'll have to specify your hardware by hand.
    
    If you had to manually specify your PCI SCSI adapter, DrakX will ask if you
    want to configure options for it. You should allow DrakX to probe the
    hardware for the card-specific options which are needed to initialize the
    adapter. Most of the time, DrakX will get through this step without any
    issues.
    
    If DrakX is not able to probe for the options to automatically determine
    which parameters need to be passed to the hardware, you'll need to manually
    configure the driver.
target: DrakX va cweri après on/des éndjins IDE so vosse copiutrece. I va ossu
    cweri après ene/des cåte(s) SCSI e PCI. Si ene cåte SCSI est trovêye
    DrakX va-st astaler otomaticmint li mineu k' i gn a mezåjhe.
    
    Come pa des côps li deteccion del éndjolreye ni sait nén trover ene sacwè,
    i s' pout ki DrakX ni trove rén. Dins ç' cas, vos dvroz specifyî vos minme
    l' éndjolreye da vosse.
    
    Si vos dvoz tchoezi manuwelmint vosse mineu, DrakX vos dmandrè si vos voloz
    mete des tchuzes por lu. Mins po cmincî, leyîz li mineu rconoxhe tot seu
    voste éndjolreye: d' acostumance, ça va tot seu.
    
    Si ça n' va nén tot seu, vos dvroz dner les informåcions pol mineu manuwelmint.

en: Drakbackup Configuration
target: Apontiaedje di Drakbackup

en: Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
target: Drakperm est eployî po vey les fitchîs a-z eployî po coridjî les permissions, prôpietaires, et groupes avou msec.
    Vos ploz eto fé vos prôpès rîles a-z eployî el plaece des prémetowès rîles.

en: Drive capacity
target: Capacités do mineu

en: Driver
target: Mineu

en: Driver:
target: Mineu:

en: Duplicate mount point %s
target: Vos avoz deus côps li pont d' montaedje %s

en: Dutch
target: Neyerlandesse

en: Dvorak
target: Taprece dvorak

en: Dvorak (Norwegian)
target: Taprece Dvorak norvedjyinne

en: Dvorak (Swedish)
target: Taprece dvorak suwedwesse

en: Dvorak (US)
target: Taprece dvorak (US)

en: Dynamic IP Address Pool:
target: Poule d' adresses IP dinamikes:

en: EIDE/SCSI channel
target: Canå EIDE/SCSI

en: Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)
target: Les prumires tchikes di pentiums fabrikêyes pa Intel avént on bug dins leu processeu di carculaedje e coma flotant ki fjheut ki l' precizion di carculaedje esteut crombe cwand on fjheut ene operåcion di pårtaedje e coma flotant (fdiv)

en: East Europe
target: Europe ponantrece

en: East Timor
target: Timor Leste

en: Ecuador
target: Ecwateur

en: Edit
target: Candjî

en: Edit current rule
target: Candjî l' rîle do moumint

en: Edit selected host
target: Candjî li tchoezi lodjoe

en: Edit selected host/network
target: Candjî li tchoezi lodjoe/rantoele

en: Edit selected printer
target: Candjî li tchoezeye sicrirece

en: Edit selected server
target: Candjî li tchoezi sierveu

en: Editable
target: Candjåve

en: Editors, shells, file tools, terminals
target: Aspougneus, shells, usteyes po fitchîs, terminås

en: Egypt
target: Edjipe

en: Either the server name or the server's IP must be given!
target: I fåt dner li no do sierveu oudonbén l' adresse IP do sierveu!

en: Eject tape after the backup
target: Fé rexhe li binde après aveur fwait l' copeye di såvrité

en: Empty
target: Vude

en: Empty label not allowed
target: Vos n' poloz avu ene vude etikete

en: Emulate third button?
target: Emuler li troejhinme boton?

en: Enable "%s" to execute the file
target: Permete l' enondaedje do fitchî pa «%s»

en: Enable "%s" to read the file
target: Permete li léjhaedje do fitchî pa «%s»

en: Enable "%s" to write the file
target: Permete li scrijhaedje el fitchî pa «%s»

en: Enable "crontab" and "at" for users
target: Permete ki les uzeus eployexhe «crontab» eyet «at»

en: Enable ACPI
target: Mete en alaedje ACPI

en: Enable CD Boot?
target: Permete l' enondaedje pa plake lazer?

en: Enable OF Boot?
target: Permete l' enondaedje pa l' Open Firmware?

en: Enable Server
target: Mete ene alaedje li sierveu

en: Enable libsafe if libsafe is found on the system
target: Mete en alaedje libsafe, si libsafe est astalé sol sistinme

en: Enable msec hourly security check
target: Mete en alaedje les verifiaedjes di såvrité pa msec tchaeke eure

en: Enable multiple profiles
target: Mete multi profils

en: Enable the logging of IPv4 strange packets
target: Mete en alaedje li rashiaedje ezès djournås des pakets IPv4 bizåres.

en: Enable/Disable crontab and at for users.
    
    Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)
    and crontab(1)).
target: Mete/dismete li «crontab» eyet «at» po ls uzeus.
    
    Metoz les uzeus kel polèt eployî dins les fitchîs /etc/cron.allow
    eyet /etc/at.allow (loukîz les pådjes di man  at(1) eyet  crontab(1)).

en: Enable/Disable libsafe if libsafe is found on the system.
target: Mete/dismete l' eployaedje di libsafe si libsafe si trove sol sistinme.

en: Enable/Disable msec hourly security check.
target: Mete/dismete li verifiaedje di såvrité di msec tchaeke eure.

en: Enable/Disable syslog reports to console 12
target: Håyner ou nén les messaedjes do djournå sistinme (syslog) sol conzôle 12

en: Enabling servers...
target: Metant les sierveus en alaedje...

en: Enabling swap partition %s
target: Metant en alaedje li pårticion di swap %s

en: Encryption key
target: Clé d' ecriptaedje

en: Encryption key (again)
target: Clé d' ecriptaedje (co ene feye)

en: Encryption key for %s
target: Clé d' ecriptaedje po %s

en: Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux
target: MandrakeSoft overe avou des ôtes eterprijhes k' ofrixhèt des solucions professioneles copatibes avou Mandrake Linux. Ene djivêye di ces påtnaires si pout trover sol waibe di MandrakeStore

en: Enter IP address and port of the host whose printers you want to use.
target: Dinez l' adresse IP eyet l' pôrt do lodjoe ki vos vloz eployî ses scrireces.

en: Enter Printer Name and Comments
target: Dinez l' no eyet l' rawete pol sicrirece

en: Enter a printer device URI
target: Dinez on URI d' éndjin di scrirece

en: Enter a user
    %s
target: Intrez on uzeu
    %s

en: Enter the directory to save to:
target: Ridant ki les copeyes di såvrité sront fwaites divins:

en: Enter the directory where backups are stored
target: Dinez l' ridant ki les copeyes di såvrité sont wårdêyes divins

en: Enter your CD Writer device name
     ex: 0,1,0
target: Dinez li no del éndjin graveu di plakes lazer
     eg: 0,1,0

en: Entering step `%s'
target: Intrant e l' etape '%s'

en: Entries you'll have to fill:
    %s
target: Intrêyes ki vos dvroz rimpli:
    %s

en: Equatorial Guinea
target: Guineye Ecwåtoriåle

en: Erase entire disk
target: Disfacer li plake etire

en: Erase tape before backup
target: Disfacer l' binde divant d' fé l' copeye di såvrité

en: Erase your RW media (1st Session)
target: Disfacer vosse sopoirt RW (prumire session)

en: Eritrea
target: Eritreye

en: Error
target: Aroke

en: Error during sending file via FTP.
     Please correct your FTP configuration.
target: Åk n' a nén stî tot-z evoyant on fitchî pa FTP.
     Verifyîz et s' coridjîz vost apontiaedje FTP s' i vs plait.

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
target: Åk n' a nén stî tot astalant aboot, 
    voloz vs ki dji saye di foirci l' astalåcion, minme si çoula pout
    distrure li prumire pårticion ?

en: Error opening %s for writing: %s
target: Ene sacwè n' a nén stî come dji droveu %s po î scrire: %s

en: Error reading file %s
target: Åk n' a nén stî come dji sayive di lére li fitchî %s

en: Error writing to file %s
target: Åk n' a nén stî come dji sayive di scrire el fitchî %s

en: Error!
target: Aroke!

en: Error: The "%s" driver for your sound card is unlisted
target: Aroke: Li mineu «%s» po vosse cåte son n' est nén el djivêye

en: Espanol
target: Español

en: Estimating
target: Dj' asteme

en: Estonia
target: Estoneye

en: Estonian
target: Estonyinne

en: Etherboot Floppy/ISO
target: Plakete/ISO etherboot

en: Etherboot ISO image is %s
target: L' imådje etherboot ISO est %s

en: Ethernet Card
target: Cåte rantoele

en: Ethernetcard
target: Cåte rantoele

en: Ethiopia
target: Etiopeye

en: European protocol
target: Protocole po l' Europe

en: European protocol (EDSS1)
target: Protocole po l' Europe (EDSS1)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
target: Totes les scrireces divèt poirter on no (par egzimpe lp).
    Les tchamps di discrijhaedje ou di l' eplaeçmint polèt esse leyîs e blanc. C' est des rawetes po les uzeus.

en: Everything (no firewall)
target: Totafwait (nou côpe feu)

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
target: Totafwait a stî apontyî.
    Vos ploz asteure pårtaedjî li raloyaedje al rantoele daegnrece avou d' ôtes copiutreces di vosse rantoele locåle, tot eployant l' apontiaedje otomatike des éndjoles (avou DHCP).

en: Examples for correct IPs:
target: Egzimpes d' adresses IP corekes:

en: Execute
target: Enonder

en: Exit
target: Moussî foû

en: Exit install
target: Moussî foû

en: Expand Tree
target: Ragrandi l' coxhlaedje

en: Expect is an extension to the Tcl scripting language that allows interactive sessions without user intervention.
target: Expect est ene egztension pol lingaedje di scripe Tcl ki permete di fé des sessions interactives sins intervincion di l' uzeu.

en: Expert Mode
target: Môde sipepieus

en: Ext2
target: ext2

en: Extended partition not supported on this platform
target: Sitindowe pårticion nén sopoirtêye so cisse platfôme chal

en: External ISDN modem
target: Cåte RDIS difoûtrinne

en: F00f bug
target: Bug «f00f»

en: FAT resizing failed: %s
target: Li candjmint di grandeu pol pårticion FAT a fwait berwete: %s

en: FATAL
target: AROKE MOIRT

en: FTP proxy
target: Proxy FTP

en: Failed to add the printer "%s" to Star Office/OpenOffice.org/GIMP.
target: Li radjoutaedje del sicrirece «%s» po Star Office/OpenOffice.org/GIMP a fwait berwete.

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)
target: Dji n' a savou verifyî li sistinme di fitchîs %s. Voloz vs sayî di coridjî les arokes? (atincion ki çoula pout vs fé piede des dnêyes)

en: Failed to configure printer "%s"!
target: L' apontiaedje del sicrirece «%s» a fwait berwete!

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org/GIMP.
target: Li bodjaedje del sicrirece «%s» po Star Office/OpenOffice.org/GIMP a fwait berwete.

en: Falkland Islands (Malvinas)
target: Iyes Malouwines

en: Faroe Islands
target: Iyes Faeroyé

en: Fdiv bug
target: Bug «fdiv»

en: February
target: Fevrî

en: Fiji
target: Fidji

en: File Selection
target: Tchoezi les fitchîs

en: File already exists. Use it?
target: Li fitchî egzistêye dedja. Voloz vs l' eployî ?

en: File is already used by another loopback, choose another one
target: Ci fitchî chal est ddja eployî d' èn ôte loopback. Purdoz è èn ôte

en: File sharing
target: Pårtaedje di fitchîs

en: Files Restored...
target: Fitchîs rapexhîs...

en: Filesystem encryption key
target: Clé d' ecriptaedje do sistinme di fitchîs

en: Filesystem type:
target: Sôre do sistinme di fitchîs:

en: Filesystem types:
target: Sôre do sistinme di fitchîs:

en: Find Package
target: Trover on pacaedje

en: Find the solutions of your problems via MandrakeSoft's online support platform.
target: Trovez les responses a vos problinmes sol platfôme di sopoirt so fyis di MandrakeSoft.

en: Finding packages to upgrade...
target: Dji cwir après les pacaedjes a mete a djoû

en: Finish
target: Fini

en: Finland
target: Finlande

en: Finnish
target: Finwesse

en: Firewall
target: Côpe feu

en: Firewall/Router
target: Côpe feu/Roûteu

en: Firewalling configuration detected!
target: Dj' a detecté l' apontiaedje d' on côpe feu!

en: Firewire controllers
target: Controleus Firewire

en: Firmware copy failed, file %s not found
target: Li copiaedje do firmware a fwait berwete; li fitchî %s n' a nén stî trové

en: Firmware copy succeeded
target: Li copiaedje do firmware a stî comifåt

en: Firmware needed
target: I gn a mezåjhe do firmware

en: Firmware-Upload for HP LaserJet 1000
target: Tcherdjaedje do firmware del HP LaserJet 1000

en: First DNS Server (optional)
target: Prumî sierveu DNS (opcionel)

en: First Time Wizard
target: Macrea di Prumî Elodjaedje

en: First floppy drive
target: prumî léjheu di plaketes

en: First sector of boot partition
target: Prumî secteu del pårticion d' enondaedje

en: First sector of drive (MBR)
target: Prumî secteu del plake (MBR)

en: First sector of the root partition
target: Prumî secteu del pårticion raecene

en: Flags
target: Drapeas

en: Floppy
target: Plakete

en: Floppy access error, unable to mount device %s
target: Åk n' a nén stî tot léjahnt l' plakete so l' éndjin %s

en: Floppy can be removed now
target: Li plakete si pout bodjî asteure

en: Floppy creation completed
target: L' askepiaedje del plakete a stî comifåt

en: Floppy format
target: Sôre di plakete

en: Font Importation and monitoring application                                     
    --windows_import : import from all available windows partitions.
    --xls_fonts      : show all fonts that already exist from xls
    --strong         : strong verification of font.
    --install        : accept any font file and any directry.
    --uninstall      : uninstall any font or any directory of font.
    --replace        : replace all font if already exist
    --application    : 0 none application.
                     : 1 all application available supported.
                     : name_of_application like  so for staroffice 
                     : and gs for ghostscript for only this one.
target: Programe d' abagaedje eyet corwaitaedje des fontes
    --windows_import : abaguer les fontes k' i gn a so les pårticions windows.
    --xls_fonts      : mostere avou xls totes les fontes dedja astalêyes
    --strong         : foirt verifiaedje del fonte.
    --install <tchimin>   : astaler ene fonte ou ridant d' fontes.
    --uninstall <tchimin> : dizastaler ene fonte ou on ridnat d' fontes.
    --replace        : replaece totes les fontes k' egzistrént ddja.
    --application <paramete> : apontiaedjes sipeciås po des programes k' i gn a
                     : «0» nou programe.
                     : «1» po tos les programs sopoirtés k' i gn a.
                     : «so» po for staroffice
                     : «gs» po ghostscript.

en: Font List
target: Djivêye des fontes

en: Fonts copy
target: Copiaedje des fontes

en: For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup.
target: Po des copeyes di såvrité dzo des ôtes sopoirts, les fitchîs sont fwaits sol deure plake, poy bodjîs dzo l' ôte sopoirt.  Si vos metoz cisse tchuze chal en alaedje, les fitchîs tar dizo l' deure plake seront disfacés après aveur fwait les copeyes di såvrité.

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
target: Po bråmint di cåtes TV modienes, li module bttv do nawea GNU/Linux fwait l' deteccion otomatike des parametes k' i fåt.
    Si l' cåte da vosse n' est nén detectêye comufåt, vos ploz foirci les bonès sôres di cåte et di des parametes k' i fåt.
    Si l' cåte da vosse n' est nén detectêye comufåt, vos ploz foirci chal les bonès sôres di cåte et di _tuner_. Vos n' avoz k' a tchoezi, s' i fåt, les parametes po vosse cåte TV

en: For security reasons, it will be disconnected now.
target: Po des råjhons di såvrité, i va esse disraloyî tot d' shûte.

en: For this to work for a W2K PDC, you will probably need to have the admin run: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add and reboot the server.
    You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
    If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
    Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
    The command 'wbinfo -t' will test whether your authentication secrets are good.
target: Po ki çoula rote  comifåt po on PDC W2K, vos åroz seurmint mezåjhe ki l' manaedjeu do sistinme enondaxhe li comande:
     « C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add »
    eyet renonder l' sierveu Windows.
    Vos åroz eto mezåjhe do no d' uzeu et do scret d' on manaedjeu di dominne por vos pleur radjouter voste éndjole a on dominne Windows?.
    Si l' rantoele n' est nén co en alaedje, DrakX sayrè di s' raloyî å dominne après l' etape d' apontiaedje del rantoele.
    Si cist apontiaedje vénreut a fé berwete, po tot l' minme li kéne råjhon, et ki l' otintifiaedje do dominne ni va nén, enondez li comande:
     « smbpasswd -j DOMINNE -U UZEU%%SICRET »
    avou vosse no di dominne Windows?, eyet li no d' uzeu et li scret do manaedjeu do dominne, djusse après l' enodnaedje do sistinme.
    Li comande « wbinfo -t » va verifyî si vos screts d' otintifiaedje sont coreks ou nén.

en: Force No APIC
target: Foircî a n' nén eployî ACPI

en: Format
target: Abwesner

en: Format partitions
target: Abwesner pårticions

en: Formatted
target: Abwesnêye

en: Formatting partition %s
target: Abwesnant li pårticion %s

en: Found "%s" interface do you want to use it ?
target: Dj' a trové ene eterface «%s», el voloz vs eployî?

en: Found %s %s interfaces
target: Dj' a trové %s eterfaces %s

en: French
target: Francesse

en: French Guiana
target: Guyane francesse

en: French Polynesia
target: Polinezeye francesse

en: Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough '0' (zeroes).
target: Li frécwénce doet aveur ene cawete «k», «M» ou «G» (par egzimpe, «2.46G» po ene frécwénce di 2.46 GHz), oudonbén radjoutez des zeros assez.

en: Frequency (MHz)
target: Frécwénce (MHz)

en: Friday
target: Vénrdi

en: Ftp Server
target: Sierveu FTP

en: GB
target: Go

en: GNU/Linux is a multi-user system, meaning each user may have their own
    preferences, their own files and so on. You can read the ``Starter Guide''
    to learn more about multi-user systems. But unlike "root", who is the
    system administrator, the users you add at this point will not be
    authorized to change anything except their own files and their own
    configurations, protecting the system from unintentional or malicious
    changes that impact on the system as a whole. You will have to create at
    least one regular user for yourself -- this is the account which you should
    use for routine, day-to-day use. Although it is very easy to log in as
    "root" to do anything and everything, it may also be very dangerous! A
    very simple mistake could mean that your system will not work any more. If
    you make a serious mistake as a regular user, the worst that will happen is
    that you will lose some information, but not affect the entire system.
    
    The first field asks you for a real name. Of course, this is not mandatory
    -- you can actually enter whatever you like. DrakX will use the first word
    you typed in this field and copy it to the "%s" field, which is the name
    this user will enter to log onto the system. If you like, you may override
    the default and change the username. The next step is to enter a password.
    From a security point of view, a non-privileged (regular) user password is
    not as crucial as the "root" password, but that is no reason to neglect
    it by making it blank or too simple: after all, your files could be the
    ones at risk.
    
    Once you click on "%s", you can add other users. Add a user for each one
    of your friends: your father or your sister, for example. Click "%s" when
    you have finished adding users.
    
    Clicking the "%s" button allows you to change the default "shell" for
    that user (bash by default).
    
    When you have finished adding users, you will be asked to choose a user
    that can automatically log into the system when the computer boots up. If
    you are interested in that feature (and do not care much about local
    security), choose the desired user and window manager, then click "%s".
    If you are not interested in this feature, uncheck the "%s" box.
target: GNU/Linux est on sistinme multi-uzeus, dj' ô bén, tchaeke uzeu pout aveur
    on evironmint, des preferinces eyet des fitchîs da lu. Vos ploz lére li
    «Guide di l' Uzeu» po ndè saveur pus long. Mins, å contråve di «root»,
    k' est l' administrateu, les uzeus ki vos alez radjouter chal n' åront
    nén l' droet di candjî ene sacwè so l' éndjole apu k' les fitchîs eyet
    apontiaedjes da zels. Vos dvroz fé pol moens on uzeu normå po vos minme.
    Ci conte uzeu la c' est po moussî el copiutrece po l' eployaedje di tos
    les djoûs. Minme si çoula shonne ahessåve di moussî tofer come «root»,
    c' est ossu ene sacwè di foirt dandjureu! Li pus ptite måcule pout
    signifyî kel sistinme da vosse ni rotrè gote pus. Si vos fjhoz ene
    consecante aroke come on uzeu normå, li pé ki vs pout ariver c' est di
    piede sacwants fitchîs et informåcions, mins nén li sistinme en etir.
    
    D' aprume, vos dvoz dner vosse no. C' est nén obligatwere, bén seur - et
    vos ploz bén î mete çou k' vos vloz. DrakX irè adon prinde li prumî mot ki
    vos avoz tapé eyet l' passer el tchamp «%s». Ci no la c' est
    l' no ki l' éndjole vos cnoxhe; çou ki vos dvoz taper el purnea di bénvnowe
    po moussî el copiutrece. Vos l' poloz candjî. Vos ploz mete çou k' vos vloz
    mins di moens di ût letes; et rén ki des ptitès letes sins accints, des
    chifes, li loyeure («-») ou li sene sorlignî («_»).
    Après çoula, vos dvoz taper vosse sicret. Li scret d' on uzeu normå, sins
    advintaedjes sipeciås n' est nén ossu impôrtant kel ci da «root», do pont
    d' vuwe del såvrité, mins c' est tolminme nén ene råjhon po n' nén
    fé atincion ås screts des uzeus - c' est vos fitchîs ki sont-st e risse.
    
    Si vos clitchîz so «%s» l' uzeu srè radjouté po d' bon avou
    les informåcions ki vs avoz dné, et les tchamps sront vudîs po vos pleur
    e radjouter on ôte. Vos e ploz radjouter ostant ki vos vloz: onk po tchaeke
    di vos soçons, po vosse pére, vosse sour, par egzimpe. Cwand vos avoz fini
    d' endè radjouter, clitchîz so «%s».
    
    Si vos clitchîz sol boton «%s» vos ploz candjî li shell eployî pa
    cist uzeu la (li prémetou shell est li «bash»).
    
    Cwand vos avoz fini di radjouter tos les uzeus, on vs dimandrè di tchoezi
    èn uzeu ki srè otomaticmint elodjî cwand l' copiutrece est enondêye.
    Si cisse fonccionålité la vos interesse (et ki l' såvrité n' est nén
    on problinme locålmint), tchoezixhoz l' uzeu eyet li manaedjeu di
    purneas ki vos vloz, et clitchîz so «%s». Si vos n' voloz nén
    cisse fonccionålité, disclitchîz «%s».

en: GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to
    local time according to the time zone you selected. If the clock on your
    motherboard is set to local time, you may deactivate this by unselecting
    "%s", which will let GNU/Linux know that the system clock and the
    hardware clock are in the same timezone. This is useful when the machine
    also hosts another operating system like Windows.
    
    The "%s" option will automatically regulate the clock by connecting to a
    remote time server on the Internet. For this feature to work, you must have
    a working Internet connection. It is best to choose a time server located
    near you. This option actually installs a time server that can used by
    other machines on your local network as well.
target: GNU/Linux manaedje l' eure e tins GMT (coistrece di Greenwich) et l' candje
    en eure locåle sorlon li coisse d' eureye ki vs avoz tchoezi. C' est possibe
    " di l' essocter si vos tchoezixhoz «%s»
     po-z aveur li minme eure pol sistinme eyet pol divintrinne ôrlodje.
    Çoula pout esse ahessåve cwand i gn a èn ôte sistinme d' operance
    (come li Windows metans) so l' éndjole, et k' i n' sait nén eployî li tins universel.
    
    Li tchuze «%s» va sincronijhî otomaticmint
    l' ôrlodje. Po çoula on raloyaedje est fwait so on sierveu d' eure sol
    daegntoele. Tchoezixhoz onk, sol djivêye ki vs est prezintêye, ki n' soeye
    nén lon erî di wice ki vos dmorez. Bén seur vos dvoz aveur on raloyaedje
    al rantoele en alaedje po-z eployî cisse tchuze chal. Çoula astalrè so voste
    éndjole on sierveu d' eure ki pôreut ossu esse eployî pa d' ôtès
    copiutreces, par egzimpe les cenes d' ene rantoele locåle, si vos vloz.

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
target: Avou GPM vos avoz li sopoirt del sori po les programes Linux e mode tecse,
    come li «comandeu di meynute» (Midnight Commander, mc). Et vos avoz eto
    li sopoirt po côper et d' plaker sol conzôle, et sopoirt po des menus
    pop-up sol conzôle.

en: Gambia
target: Gambeye

en: Game station
target: Posse di djeus

en: Gateway
target: Pasrele

en: Gateway (e.g. %s)
target: Pasrele (eg %s)

en: Gateway address should be in format 1.2.3.4
target: L' adresse IP del pasrele doet esse del cogne 1.2.3.4

en: Gateway device
target: Éndjin di pasrele

en: Gateway:
target: Pasrele:

en: General
target: Djenerå

en: Generate auto install floppy
target: Fé li plakete d' astalaedje otomatike

en: Generating preview ...
target: Dji fwait des imådjes po vey divant...

en: Generic
target: Djenerike

en: Generic 2 Button Mouse
target: Sori tipike a 2 botons

en: Generic 3 Button Mouse
target: Sori tipike a 3 botons

en: Generic 3 Button Mouse with Wheel emulation
target: Sori tipike a 3 botons avou rôlete emulêye

en: Generic PS2 Wheel Mouse
target: Sori tipike PS2 a rôlete

en: Generic Printers
target: Sicrireces djenerikes

en: Geometry: %s cylinders, %s heads, %s sectors
target: Djeyometreye: %s cilindes, %s tiesses, %s secteus

en: Georgia
target: Djeyordjeye

en: Georgian ("Latin" layout)
target: Djeyordjyinne (cogne latene)

en: Georgian ("Russian" layout)
target: Djeyordjyinne (cogne rûsse)

en: German
target: Almande

en: German (no dead keys)
target: Almande (sins moitès tapes)

en: Germany
target: Almagne

en: Get Windows Fonts
target: Prinde les fontes di Windows

en: Get the best items with Mandrake Linux Strategic partners
target: Les meyeus cayets avou les påtnaires sitratedjikes di Mandrake Linux

en: Ghana
target: Gana

en: Ghostscript referencing
target: Fijhaedje di referinces po Ghostscript

en: Gibraltar
target: Djibraltar

en: Give a file name
target: Dinez on no d' fitchî

en: Give the ram size in MB
target: Dinez li grandeu del RAM e Mo

en: Give write access to ordinary users
target: Diner accès e scrijhaedje po les uzeus normås

en: Gnome Workstation
target: Posse éndjolrece Gnome

en: Go on anyway?
target: Dji continowe tot l' minme?

en: Go on without configuring the network
target: Continuwer sins apontyî li rantoele

en: Graphic Card
target: Cåte grafike

en: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
target: Cåte grafike
    
       Li programe d' astalaedje fwait normålmint otomaticmint li deteccion
    eyet l' apontiaedje del cåte grafike k' i gn a dins voste éndjole.
    Si c' est nén l' cas, vos ploz tchoezi e l' djivêye li cåte ki vos
    avoz po d' bon.
    
       S' i gn a des sierveus grafikes diferins po vosse cåte grafike, des cis
    k' i gn a avou del acceleråcion 3D, des ôtes sins, on vs propôzrè di
    tchoezi l' ci ki vs convént l' mî.

en: Graphical Environment
target: Evironmint grafike

en: Graphical Interface
target: Eterface grafike

en: Graphical interface
target: Eterface grafike

en: Graphical interface at startup
target: Enonder X a l' enondaedje

en: Graphics card: %s
target: Cåte grafike: %s

en: Graphics card: %s
target: Cåte grafike: %s

en: Graphics memory: %s kB
target: Memwere del cåte: %s Ko

en: Greece
target: Grece

en: Greek
target: Greke

en: Greek (polytonic)
target: Grek (politonike)

en: Greenland
target: Groenlande

en: Grenada
target: Grenade

en: Group
target: Groupe

en: Group :
target: Groupe:

en: Guatemala
target: Gwatemala

en: Guinea
target: Guineye

en: Guinea-Bissau
target: Guineye-Bissau

en: Gujarati
target: Indyinne (Gujarati)

en: Gurmukhi
target: Indyinne (Gurmukhi)

en: Guyana
target: Guyane

en: HTTP proxy
target: Proxy HTTP

en: Haiti
target: Haïti

en: Halt bug
target: Bug «halt»

en: Hard Disk Backup Progress...
target: Fijhaedje des copeyes di såvrité sol deure plake...

en: Hard Disk Backup files...
target: Fitchîs di copeye di såvrité sol deure plake...

en: Hard drive detection
target: Trover les deurès plakes

en: Hard drive information
target: Informåcion sol deure plake

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
target: HardDrake fwait ene deteccion del éndjolreye, et pout ossu apontyî
    les noveas/candjîs éndjins.

en: HardDrive / NFS
target: Deure plake / NFS

en: Harddrake help
target: Aidance di Harddrake

en: Harddrake2 version %s
target: Harddrake2 modêye %s

en: Hardware
target: Éndjolreye

en: Hardware clock set to GMT
target: L' ôrlodje del éndjolreye metowe e tins universel (GMT)

en: Hardware probing in progress
target: Deteccion del éndjolreye en alaedje

en: Have a nice day!
target: Ene bone djournêye et k' vos fuxhoz binåjhe!

en: Heard and McDonald Islands
target: Iyes Heard et McDonald

en: Help
target: Aidance

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
target: Vochal les intrêyes.
    Vos ndè poloz radjouter ou co candjî les cenes k' î sont ddja.

en: Here is a list of all auto-detected printers.
target: Vochal ene djivêye des scrireces k' ont stî detectêyes otomaticmint.

en: Here is a list of the available printing options for the current printer:
target: Vochal ene djivêye des tchuzes k' i gn a pol sicrirece do moumint:

en: Here is the full list of available countries
target: Vochal li djivêye di tos les payis k' on pout tchoezi

en: Here is the full list of keyboards available
target: Vochal li djivêye di totes les tapreces k' i gn a

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
target: Chal vos ploz tchoezi li tape ou li combinåcion di tapes ki 
    vos vorîz eployî po candjî d' ene taprece a l' ôte
    (eg: d' ene taprece e letes latenes a ene nén latene)

en: Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines.
target: Chal vos ploz tchoezi si les scrireces raloyeyes locålmint so ciste éndjole chal dvèt esse accessibe pa des éndjoles då lon, et pa kénès éndjoles.

en: Here you can choose whether the scanners connected to this machine should be accessable by remote machines and by which remote machines.
target: Chal vos ploz tchoezi si les scanreces raloyeyes locålmint so ciste éndjole chal dvèt esse accessibe pa des éndjoles då lon, et pa kénès éndjoles.

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
target: Chal vos ploz tchoezi on mineu alternatif (OSS oudonbén ALSA) po vosse cåte son (%s).

en: Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer.
target: Chal vos ploz dner tot l' minme li kéne comande ki l' bouye î doet esse voyeye åd truviè d' ene buze

en: Here, you can setup the security level and administrator of your machine.
    
    
    The Security Administrator is the one who will receive security alerts if the
    'Security Alerts' option is set. It can be a username or an email.
    
    
    The Security Level menu allows you to select one of the six preconfigured security levels
    provided with msec. These levels range from poor security and ease of use, to
    paranoid config, suitable for very sensitive server applications:
    
    
    <span foreground="royalblue3">Poor</span>: This is a totally unsafe but very
    easy to use security level. It should only be used for machines not connected to
    any network and that are not accessible to everybody.
    
    
    <span foreground="royalblue3">Standard</span>: This is the standard security
    recommended for a computer that will be used to connect to the Internet as a
    client.
    
    
    <span foreground="royalblue3">High</span>: There are already some
    restrictions, and more automatic checks are run every night.
    
    
    <span foreground="royalblue3">Higher</span>: The security is now high enough
    to use the system as a server which can accept connections from many clients. If
    your machine is only a client on the Internet, you should choose a lower level.
    
    
    <span foreground="royalblue3">Paranoid</span>: This is similar to the previous
    level, but the system is entirely closed and security features are at their
    maximum
target: Chal, vos ploz apontyî l' livea di såvrité eyet l' manaedjeu pol såvrité
    di voste éndjole.
    
    
    Li manaedjeu pol såvrité est l' ci ki rçurè les abranles di såvrité, si
    l' tchuze «abranles di såvrité» a stî metowe; ça pout esse on no d' uzeu
    oudonbén ene adresse emile.
    
    
    Li menu do livea di såvrité vos permete di tchoezi onk des shijh prémetous
    liveas fornis pa msec. Ces liveas vont d' ene flåwe såvrité mins åjhey
    a-z eployî l' sistinme, a èn apontiaedje di hôte såvrité, po des eployaedjes
    come sierveu dins des situwåcions wice kel såvrité est mo consecante:
    
    
    <span foreground="royalblue3">Pôve</span>: Ci livea chal n' a nole såvrité, mins
    c' est åjhey a-z eployî; ça n' divreut esse eployî ki po des éndjoles ki
    n' sont nén metowes e rantoele, et ki n' sont nén accessibes pa tot
    l' minme kî.
    
    
    <span foreground="royalblue3">Tipike</span>: Çouchal est l' livea di såvrité standård ricmandé po
    ene copiutrece raloyeye al daegntoele come cliyint.
    
    
    <span foreground="royalblue3">Hôte</span>: Avou ci la i gn a ddja sacwantès restriccions, et pus di
    verifiaedjes otomatikes enondés del nute.
    
    
    <span foreground="royalblue3">Co pus hôte</span>: Li såvrité est hôte assez ki po-z eployî l' sistinme
    come sierveu ki pout accepter des raloyaedjes di bråmint
    d' cliyints. Si voste éndjole est seulmint cliyint sol
    daegntoele, vos dvrîz tchoezi on livea pus bas.
    
    
    <span foreground="royalblue3">Paranoyide</span>: Çouchal ravize li livea di dvant, mins li sistinme est
    totafwaitmint seré eyet les fonccions di såvrité a leu macsimom.

en: Hide files
target: Catchî les fitchîs

en: High
target: Hôte

en: Higher
target: Co pus hôte

en: Horizontal refresh rate
target: Frécwénce di rafristaedje di coûtchî

en: Host "%s", port %s
target: Lodjoe «%s», pôrt %s

en: Host %s
target: Lodjoe %s

en: Host Name
target: No do lodjoe

en: Host name
target: No do lodjoe

en: Host name or IP.
target: No do lodjoe ou adresse IP.

en: Host/network IP address missing.
target: I manke l' adresse IP do lodjoe/del rantoele.

en: Hostname required
target: I gn a mezåjhe d' on no d' lodjoe

en: Hostname:
target: No do lodjoe:

en: Hour
target: Eure

en: How is the printer connected?
target: Kimint li scrirece est ele raloyeye?

en: Hungarian
target: Hongrwesse

en: Hungary
target: Hongreye

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
target: Dji pou wårder vost apontiaedje do moumint et supôzer ki vos avoz ddja apontyî on sierveu DHCP; dins ç' cas acertinez vs ki dj' a bén léjhou comufåt l' adresse rantoele eployeye pol rantoele locåle; dji n' va nén rapontyî çoula et nén candjî l' apontiaedje do sierveu DHCP.
    
    Li prémetowe intrêye est li sierveu di nos (DNS) di muchete so l' éndjole. Vos l' poloz replaecî avou l' DNS di vost ahesseu par egzimpe.
    
    Oudonbén, dji pou rapontyî vosse eterface rantoele eyet (r)apontyî on sierveu DHCP por vos.

en: I can set up your computer to automatically log on one user.
target: Voste éndjole pout esse apontieye po s' elodjî otomaticmint avou èn uzeu do côp k' ele s' enonde.

en: I can setup your computer to automatically start the graphical interface (XFree) upon booting.
    Would you like XFree to start when you reboot?
target: Si vos voloz, voste éndjole pout esse metowe dins li môde grafike (dizo X)
    do côp k' ele s' enonde.
    Voloz vs enonder X cwand vos renondez voste éndjole?

en: I can't add any more partition
target: Dji n' pou nén radjouter ene pårticion

en: I can't find any room for installing
target: Dji n' a savou trover del plaece po l' astalåcion

en: I can't find needed image file `%s'.
target: Dji n' sai trover li fitchî imådje «%s» k' i gn a mezåjhe.

en: I can't read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to lose all the partitions?
target: Dji n' parvén nén a lére li tåvlea di pårtixhaedje di l' éndjin %s,
    ele est trop crombe por mi :(
    Dji m' va sayî di disfacer les mwaijhès pårticions (mins TOTES LES DNÊYES
    vont esse pierdowes!).
    L' ôte solucion c' est di nén leyî DrakX candjî li tåvlea di pårtixhaedje.
    (l' aroke esta «%s»)
    
    Estoz vs d' acoird di piede totes les pårticions?

en: I don't know
target: Dji n' sai nén

en: I don't know how to format %s in type %s
target: Dji n' sai cmint abwesner %s e sôre %s

en: I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.
target: Dj' a trové ene cåte RDIS PCI, mins dji n' sai nén ké mineu eployî.
    Tchoezixhoz li bone cåte PCI dins l' djivêye ki shût.

en: INFO
target: INFORMÅCION

en: IP Range End:
target: Fin del fôrtchete d' adresses IP:

en: IP Range Start:
target: Comince del fôrtchete d' adresses IP:

en: IP address
target: Adresse IP

en: IP address of host/network:
target: Adresse IP do lodjoe/del rantoele:

en: IP address should be in format 1.2.3.4
target: L' adresse IP doet esse del cogne 1.2.3.4

en: ISDN Configuration
target: Apontiaedje pol RDIS

en: ISDN card
target: Cåte RDIS

en: ISDN connection
target: Raloyaedje viè RDIS

en: Iceland
target: Izlande

en: Icelandic
target: Izlandesse

en: Icon
target: Imådjete

en: If SERVER_LEVEL (or SECURE_LEVEL if absent)
    is greater than 3 in /etc/security/msec/security.conf, creates the
    symlink /etc/security/msec/server to point to
    /etc/security/msec/server.<SERVER_LEVEL>.
    
    The /etc/security/msec/server is used by chkconfig --add to decide to
    add a service if it is present in the file during the installation of
    packages.
target: Si l' valixhance di SERVER_LEVEL (ou di SECURE_LEVEL si nén defini)
    est pus grand ki 3 dins /etc/security/msec/security.conf,
    li loyén simbolike di /etc/security/msec/server viè
    /etc/security/msec/server.<SERVER_LEVEL> srè fwait.
    
    Li fitchî /etc/security/msec/server est eployî pa «chkconfig --add» po
    decider s' i fåt radjouter on siervice ou nén tins d' l' astalaedje
    des paketaedjes rpm.

en: If it is not the one you want to configure, enter a device name/file name in the input line
target: Si c' est nén li cene ki vos vloz apontyî, dnez on no d' fitchî ou d' éndjin sol roye d' intrêye.

en: If no port is given, 631 will be taken as default.
target: Si nou pôrt n' est dné, li prémetowe valixhance srè 631.

en: If set to "ALL", /etc/issue and /etc/issue.net are allowed to exist.
    
    If set to NONE, no issues are allowed.
    
    Else only /etc/issue is allowed.
target: Si metou come «ALL» (tos), /etc/issue eyet /etc/issue.net sont permetous.
    
    Si metou come «NONE» (nouk), nou messaedje di bénvnowe n' est permetou.
    
    Ôtrumint, seulmint /etc/issue est permetou.

en: If set, send the mail report to this email address else send it to root
target: S'  il est metou, evoyî li rapoirt pa emile a ciste adresse la, ôtmint l' evoyî a root

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
target: Si vos avoz totes les plakes lazer del djivêye å dzo, clitchîz so «'l est bon».
    Si vos n' en avoz nole, clitchîz so «Rinoncî».
    Si seulmint sacwantès plakes ki vos n' avoz nén, adon vos poloz
    les distchoezi et clitchî so «'l est bon».

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
target: Si vos contez eployî aboot, loukîz di leyî on pô del plaece (avou 2048 
    secteus, vos froz bén) å cminçmint del plake

en: If you really think that you know which driver is the right one for your card
    you can pick one in the above list.
    
    The current driver for your "%s" sound card is "%s"
target: Si vos pinsez vormint ki vos savoz ké mineu est l' bon po vosse cåte,
    vos l' poloz tchoezi del djivêye chal pa dzeur.
    
    Li mineu do moumint po vosse cåte son «%s» est «%s»

en: If you told the installer that you wanted to individually select packages,
    it will present a tree containing all packages classified by groups and
    subgroups. While browsing the tree, you can select entire groups,
    subgroups, or individual packages.
    
    Whenever you select a package on the tree, a description appears on the
    right to let you know the purpose of the package.
    
    !! If a server package has been selected, either because you specifically
    chose the individual package or because it was part of a group of packages,
    you will be asked to confirm that you really want those servers to be
    installed. By default Mandrake Linux will automatically start any installed
    services at boot time. Even if they are safe and have no known issues at
    the time the distribution was shipped, it is entirely possible that that
    security holes were discovered after this version of Mandrake Linux was
    finalized. If you do not know what a particular service is supposed to do
    or why it is being installed, then click "%s". Clicking "%s" will
    install the listed services and they will be started automatically by
    default during boot. !!
    
    The "%s" option is used to disable the warning dialog which appears
    whenever the installer automatically selects a package to resolve a
    dependency issue. Some packages have relationships between each other such
    that installation of a package requires that some other program is also
    rerquired to be installed. The installer can determine which packages are
    required to satisfy a dependency to successfully complete the installation.
    
    The tiny floppy disk icon at the bottom of the list allows you to load a
    package list created during a previous installation. This is useful if you
    have a number of machines that you wish to configure identically. Clicking
    on this icon will ask you to insert a floppy disk previously created at the
    end of another installation. See the second tip of last step on how to
    create such a floppy.
target: Finålmint, sorlon vosse tchuze di tchoezi ou nén les pacaedjes onk après
    l' ôte, vos voeroz on åbe avou tos les pacaedjes metous dins des groupes
    et des sorgroupes. Tot naiviant dins l' åbe vos ploz tchoezi des groupes
    ou des sorgroupes etirs, ou des pacaedjes tot seus.
    
    Tchaeke côp ki vos tchoezixhoz on pacaedje dins l' åbe, si discrijhaedje
    est mostré sol droete ki vs dit a cwè i pout bén siervi.
    
    !! Si on pacaedje di sierveu a stî tchoezi, soeye-t i en esprès, ou k' i
    fwait pårteye d' on groupe, on vos dmandrè d' acertiner ki vos vloz
    vormint astaler ces sierveus la. Avou Mandrake Linux tot l' minme ké
    sierveu k' a stî astalé est, avou les prémetowès tchuzes, metou en
    alaedje tins di l' enondaedje di l' éndjole. Minme s' i sont seurs
    et k' i gn a nou cnoxhou problinme å moumint ki l' distribucion a stî
    fwaite, i s' pout k' des trôs di såvrité soeyexhe discovrous après ki
    cisse modêye chal di Mandrake Linux fuxhe fineye. Si vos n' savoz nén çou
    k' on siervice dné est supôzé di fé, ou pocwè k' il est astalé, adon
    clitchîz so «%s». Si vos clitchîz so «%s» les siervices mostrés sront
    astalés eyet enondés otomaticmint (a moens ki vos candjîz l' prémetou
    apontiaedje). !!
    
    Li tchuze «%s» simplumint fwait ki l' purnea 
    d' adviertixhmint cwand on pacaedje est tchoezi otomaticmint n' est
    nén håyné. Les pacaedjes tchoezi otomaticmint c' est pask' i gn a des
    pacaedjes tchoezis k' ont des aloyances avou des ôtes pacaedjes, et 
    k' i les fåt astaler avou po-z aveur l' astalåcion fwaite a môde
    di djin.
    
    Li ptite imådje d' ene plakete al valeye del djivêye vos permete di
    tcherdjî ene djivêye di pacaedjes tchoezis k' åreut stî fwaite å moumint
    d' èn ôte astalaedje. Si vos clitchîz so ciste imådjete chal, i vos srè
    dmandé di mete li plakete fwaite al fén di l' astalaedje di dvant.
    Loukîz l' aidance do deujhinme pont del dierinne etape po saveur kimint
    fé ene sifwaite plakete.

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
target: Si vosse sicrirece n' est nén el djivêye, tchoezixhoz ene copatibe (léjhoz li manuwel del sicrirece) ou ene ki rshonne li pus.

en: Image
target: Imådje

en: Import Fonts
target: Abagaedje di fontes

en: Importance:
target: Impôrtance:

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
target: Sol copete di tot çoula, les caweyes ki n' ont nén stî fwaites avou ci programe chal nerén avou «foomatic-configure» ni polèt nén esse transferêyes.

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
target: A feyes, li mineuse %s a dandjî d' ene miete di pus d' informåcions po-z
    aler comufåt, ca bén k' ele va bén sins, normålmint. Voloz vs diner des
    informåcions asteure ou leyî li mineuse cachî leye-minme dins voste éndjole
    après les informåcions k' ele a dandjî? Pa côps, çoula pout fé aroker li
    copiutrece. Mins ça n' såreut fé nou må.

en: In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
target: S' i gn a des sierveus grafikes diferins po vosse cåte grafike, des cis
    k' i gn a avou del acceleråcion 3D, des ôtes sins, on vs propôzrè di
    tchoezi l' ci ki vs convént l' mî.

en: India
target: Inde

en: Individual package selection
target: Tchoezi tchaeke pacaedje separumint

en: Indonesia
target: Indonezeye

en: Info
target: Informåcion

en: Info:
target: Informåcion:

en: Information
target: Informåcions

en: Init Message
target: Messaedje d' enondaedje

en: Initial tests
target: Sayes po cmincî

en: Initrd-size
target: Grandeu-Initrd

en: Insert a FAT formatted floppy in drive %s
target: Metoz ene plakete FAT-abwesnêye divins li léjheu %s

en: Insert a FAT formatted floppy in drive %s with %s in root directory and press %s
target: Metoz ene plakete FAT-abwesnêye divins l' léjheu %s, avou l' fitchî %s e l' raecene, et clitchîz so %s

en: Insert a blank floppy in drive %s
target: Metoz ene blanke plakete divins li léjheu %s

en: Insert a floppy containing package selection
target: Metoz ene plakete avou li tchuze des pacaedjes

en: Insert a floppy in %s
target: Metoz ene plakete divins l' %s

en: Insert a floppy in drive
    All data on this floppy will be lost
target: Metoz ene plakete dvins li léjheu
    Totes les dnêyes sol plakete vont esse pierdowes

en: Insert floppy
target: Metoz ene plakete divins l' léjheu

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
target: Metoz li plake lazer avou l' etikete %s
     e l' léjheu di plakes lazer do pont d' montaedje /mnt/cdrom

en: Insert the tape with volume label %s
     in the tape drive device %s
target: Sititchîz l' binde avou l' etikete di volume %s
     dins l' léjheu d' bindes %s

en: Install
target: Astalaedje

en: Install & convert Fonts
target: Astaler & covierti les fontes

en: Install List
target: Djivêye a-z astaler

en: Install bootloader
target: Astaler l' enondrece

en: Install rpm
target: Astaler rpm

en: Install system
target: Astaler sistinme

en: Install themes
target: Astaler tinmes

en: Install updates
target: Metaedjes a djoû

en: Install/Upgrade
target: Astaler/Mete a djoû

en: Installation Server Configuration
target: Apontiaedje do sierveu d' astalaedje

en: Installation image directory
target: Ridant avou l' imådje po l' astalåcion

en: Installation of %s failed. The following error occured:
target: Åk n' a nén stî e l' astalaedje di %s. Vochal l' aroke:

en: Installation of bootloader failed. The following error occured:
target: Åk n' a nén stî e l' astalaedje di l' enondrece. Vochal l' aroke:

en: Installing
target: Astalant

en: Installing %s ...
target: Dj' astale %s ...

en: Installing Foomatic...
target: Astalant Foomatic...

en: Installing HPOJ package...
target: Astalant les pacaedjes HPOJ...

en: Installing SANE packages...
target: Astalant les pacaedjes SANE...

en: Installing a printing system in the %s security level
target: Astalaedje d' on sistinme d' eprimaedje e livea di såvrité «%s»

en: Installing bootloader
target: Astalant l' enondrece

en: Installing driver for %s card %s
target: Astalant mineu po %s cåte %s

en: Installing mtools packages...
target: Astalant les pacaedjes mtools...

en: Installing package %s
target: Astalant li pacaedje %s

en: Installing package %s
    %d%%
target: Astalant li pacaedje %s
    %d%%

en: Installing packages...
target: Astalant les pacaedjes...

en: Interface
target: Eterface

en: Interface "%s"
target: Eterface «%s»

en: Interface %s
target: Eterface %s

en: Interface %s (on network %s)
target: Eterface %s (sol rantoele %s)

en: Interface %s (using module %s)
target: Eterface %s (ki eploye li module %s)

en: Interface:
target: Eterface:

en: Internal ISDN card
target: Cåte RDIS divintrinne

en: Internet
target: Rantoele

en: Internet Connection Configuration
target: Apontiaedje do raloyaedje al rantoele daegnrece

en: Internet Connection Sharing
target: Pårtaedje do raloyaedje al rantoele daegnrece

en: Internet Connection Sharing configuration
target: Apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece

en: Internet Connection Sharing currently disabled
target: Li pårtaedje do raloyaedje al rantoele daegnrece est dismetou.

en: Internet Connection Sharing currently enabled
target: Li pårtaedje do raloyaedje al rantoele daegnrece est en alaedje

en: Internet Connection Sharing is now disabled.
target: Asteure li pårtaedje do raloyaedje al rantoele daegnrece est dismetou.

en: Internet Connection Sharing is now enabled.
target: Asteure li pårtaedje do raloyaedje al rantoele daegnrece est en alaedje.

en: Internet access
target: Accès al rantoele daegnrece

en: Internet configuration
target: Apontiaedje pol rantoele daegnrece

en: Internet connection
target: Raloyaedje al rantoele daegnrece

en: Internet connection configuration
target: Apontiaedje do raloyaedje al rantoele daegnrece

en: Internet gateway
target: Pasrele pol rantoele daegnrece

en: Internet station
target: Posse pol rantoele daegnrece

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
target: Pôrt nén valide di dné: %s.
    Li bone cogne c' est «pôrt/tcp» ou «pôrt/udp», 
    avou «pôrt» on limero inte 1 eyet 65535.

en: Iranian
target: Iranyinne

en: Iraq
target: Irak

en: Ireland
target: Irlande

en: Irish
target: Irlandesse

en: Is FPU present
target: I gn a-st on FPU

en: Is this an install or an upgrade?
target: C' est ene astalåcion ou on metaedje a djoû?

en: Is this correct?
target: Totafwait va-t i comufåt?

en: Is this the correct setting?
target: Est çki c' est l' apontiaedje corek?

en: Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?
target: Est çki vosse sicrirece est on éndjin multi-fonccions d' amon HP ou Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 avou scanrece, DeskJey 450, Sony IJP-V100), ene HP PhotoSmart ou ene HP LaserJet 2200?

en: Israel
target: Israyel

en: Israeli
target: Israyelyinne

en: Israeli (Phonetic)
target: Israyelyinne (fonetike)

en: It is now time to specify which programs you wish to install on your
    system. There are thousands of packages available for Mandrake Linux, and
    to make it simpler to manage the packages have been placed into groups of
    similar applications.
    
    Packages are sorted into groups corresponding to a particular use of your
    machine. Mandrake Linux has four predefined installations available. You
    can think of these installation classes as containers for various packages.
    You can mix and match applications from the various groups, so a
    ``Workstation'' installation can still have applications from the
    ``Development'' group installed.
    
     * "%s": if you plan to use your machine as a workstation, select one or
    more of the applications that are in the workstation group.
    
     * "%s": if plan on using your machine for programming, choose the
    appropriate packages from that group.
    
     * "%s": if your machine is intended to be a server, select which of the
    more common services you wish to install on your machine.
    
     * "%s": this is where you will choose your preferred graphical
    environment. At least one must be selected if you want to have a graphical
    interface available.
    
    Moving the mouse cursor over a group name will display a short explanatory
    text about that group. If you unselect all groups when performing a regular
    installation (as opposed to an upgrade), a dialog will pop up proposing
    different options for a minimal installation:
    
     * "%s": install the minimum number of packages possible to have a
    working graphical desktop.
    
     * "%s": installs the base system plus basic utilities and their
    documentation. This installation is suitable for setting up a server.
    
     * "%s": will install the absolute minimum number of packages necessary
    to get a working Linux system. With this installation you will only have a
    command line interface. The total size of this installation is about 65
    megabytes.
    
    You can check the "%s" box, which is useful if you are familiar with the
    packages being offered or if you want to have total control over what will
    be installed.
    
    If you started the installation in "%s" mode, you can unselect all groups
    to avoid installing any new package. This is useful for repairing or
    updating an existing system.
target: Asteure c' est l' moumint di specifyî kés programes ki vos vloz astaler
    so voste éndjole. I gn a des meyes et des meyes di pacaedjes pol Mandrake
    Linux, po rinde li tchoezixhaedje pus simpe il ont stî metous dins des
    groupes di programes sorlon les bouyes k' i permetèt d' fé.
    
    Les pacaedjes sont metous dins des groupes corespondant a des uzaedjes
    ki pôrént esse fwaits. Les groupes zels minmes sont metous dins cwate
    grandès classes; tuzez a ces classes d' astalaedje come des boesses
    k' ont å dvins sacwants pacaedjes. Vos ploz prinde et maxhî des programes
    di sacwantès di ces boesses la, par egzimpe èn astalaedje «Posse éndjolrece»
    n' espaitche nén d' astaler des programes del sôre «Programaedje».
    
     * «%s»: si vos tuzez a-z eployî voste éndjole come on posse
    éndjolrece (dj' ô bén: on uzaedje personel, å contråve d' on uzaedje
    come sierveu metans), adon tchoezixhoz onk ou pluzieurs des programes
    di ç' groupe chal.
    
     * «%s»: si l' éndjole va-z esse eployeye po programer,
    tchoezixhoz les pacaedjes ki vos vloz chal.
    
     * «%s»: al fén, si l' såme di l' éndjole c' est d' esse on sierveu,
    vos pôroz les kés siervices vos vloz vey astalés so l' éndjole.
    
     * «%s»: chal c' est wice ki vos alez tchoezi vosse
    evironmint grafike favori. I fåt ndè tchoezi pol moens onk si vos vloz
    on posse éndjolrece avou ene eterface grafike!
    
    Cwand vos alez avou l' sori å dzeu do no d' on groupe, ene racsegne srè
    håynêye avou on court discrijhaedje di çou a cwè i pout siervi.
    Si vos n' tchoezixhoz nou groupe po l' astalaedje (et k' c' est nén on
    metaedje a djoû), on purnea vos dmandrè li sôre del astalåcion minimom ki
    vos vloz. Çoula pout esse:
    
     * «%s» astale li moens possibe di pacaedjes po tot l' minme aveur
    l' eterface grafike X11 en alaedje;
    
     * «%s» astale li sistinme di båze eyet sacwantes
    usteyes avou leu documintåcion. C' est l' astalåcion a l' idêye po on
    sierveu.
    
     * «%s» n' astalrè ki vormint li minimom po ki
    l' éndjole s' enonde eyet aveur on sistinme Linux en alaedje; rén k' e
    roye di comande. Ciste astalåcion chal a mezåjhe di 65 Mo seulmint.
    
    Vos ploz clitchî sol tchuze «%s». C' est
    ahessåve si vos cnoxhoz on pô les pacaedjes k' i gn a et çki vos vloz;
    oudonbén si vos vloz on contrôle totå so çki srè astalé ou nén.
    
    Si vos cmincîz l' astalaedje e môde «%s», vos ploz disclitchî
    tos les groupes po nén aveur des noveas pacaedjes d' astalés, seulmint les
    cis k' vos avîz ddja davance sront astalés. Çouchal est ahessåve po
    reparer ou mete a djoû on sistinme k' est ddja sol deure plake.

en: Italian
target: Itålyinne

en: Italy
target: Itåleye

en: Jamaica
target: Djamayike

en: January
target: Djanvî

en: Japan
target: Djapon

en: Japan (broadcast)
target: Djapon (pa waches)

en: Japan (cable)
target: Djapon (cåbe-TV)

en: Japanese 106 keys
target: Djaponesse di 106 tapes

en: Japanese text printing mode
target: Eprimaedje di tecses djaponès

en: Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:
target: Ridjondoz les ekipes di sopoirt di MandrakeSoft eyet li cominålté so fyis po pårtaedjî vos cnoxhances eyet aidî ls ôtes tot divnant on espert ricnoxhou sol waibe di sopoirt tecnike so fyis:

en: Jordan
target: Djordaneye

en: Journalised FS
target: FS djournalijhî

en: Joystick
target: Djîsse di djeu

en: July
target: Djulete

en: June
target: Djun

en: KB
target: Ko

en: KDE Workstation
target: Posse éndjolrece KDE

en: Kazakhstan
target: Kazaxhstan

en: Keep the changes?
    The current configuration is:
    
    %s
target: Wårder les candjmints?
    L' apontiaedje do moumint est:
    
    %s

en: Kensington Thinking Mouse with Wheel emulation
target: Kensington Thinking Mouse avou rôlete emulêye

en: Kenya
target: Kenia

en: Kernel Boot Timeout
target: Tårdjaedje po l' enondaedje do nawea

en: Kernel version
target: Modêye do nawea

en: Kernel:
target: Nawea:

en: Keyboard
target: Taprece

en: Keyboard layout: %s
target: Sôre del taprece: %s

en: Korea
target: Coreye

en: Korea (North)
target: Coreye do Nôr

en: Korean keyboard
target: Taprece coreyinne

en: Kyrgyzstan
target: Kirgizstan

en: LAN Configuration
target: Apontiaedje del rantoele locåle

en: LAN configuration
target: Apontiaedje del rantoele locåle

en: LAN connection
target: Raloyaedje al rantoele locåle

en: LDAP Base dn
target: Raecene (dn) LDAP

en: LDAP Server
target: Sierveu LDAP

en: LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally
    automated. DrakX will analyze the disk boot sector and act according to
    what it finds there:
    
     * if a Windows boot sector is found, it will replace it with a grub/LILO
    boot sector. This way you will be able to load either GNU/Linux or another
    OS.
    
     * if a grub or LILO boot sector is found, it will replace it with a new
    one.
    
    If it cannot make a determination, DrakX will ask you where to place the
    bootloader.
target: LILO eyet grub sont des enondreces po GNU/Linux. Normålmint, ciste etape
    chal est totafwaitmint otomatike. DrakX va analijhî li cmince del deure
    plake eyet ovrer sorlon çou ki srè trové la:
    
     * si c' est on secteu d' enondaedje Windows k' est trové, i srè
    replaecî avou on secteu d' enondaedje di grub/LILO. Come çoula vos pôroz
    enonder GNU/Linux ou èn ôte S.O.
    
     * si c' est on secteu d' enondaedje di grub ou LILO k' est trové,
    i srè replaecî avou on pus novea.
    
    Si nou secteu d' enondaedje n' est trové, DrakX vos dmandrè wice
    mete l' enondrece.

en: LILO with graphical menu
target: LILO avou on menu grafike

en: LILO with text menu
target: LILO avou on menu e môde tecse

en: LILO/grub Installation
target: Astalåcion di LILO/grub

en: LOCAL
target: LOCÅ

en: LPD - Line Printer Daemon
target: LPD - Li vî démon d' eprimaedje di GNU/Linux

en: LPD and LPRng do not support IPP printers.
target: LPD eyet LPRng ni sopoirtèt nén les scrireces IPP.

en: LPD server "%s", printer "%s"
target: Sierveu LPD «%s», sicrirece «%s»

en: LPRng - LPR New Generation
target: LPRng - Ene amidrêye modêye do démon d' eprimaedje LPR

en: LVM name?
target: No do LVM?

en: LVM-disks %s
target: Plakes-LVM %s

en: Label
target: Etikete

en: Language
target: Lingaedje

en: Laos
target: Lawos

en: Laotian
target: Lawocyinne

en: Latin American
target: Taprece del Amerike nonnrece

en: Latvia
target: Letoneye

en: Latvian
target: Letone

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
target: Enonde ene passete po les pakets rantoele, pol séreye di naweas Linux 2.2,
    vos end avoz mezåjhe po mete so pîs on côpe feu po mete voste éndjole
    a hipe des atakes des hacneus.

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
target: Enonder li sistinme di son ALSA (Advanced Linux Sound Architecture)

en: Launch the graphical environment when your system starts
target: Enonder li sistinme X-Window a l' enonda di l' éndjole

en: Launch the sound system on your machine
target: Enonder li sistinme di son so voste éndjole

en: Launch the wizard
target: Enonder l' macrea

en: Launch userdrake
target: Enonder userdrake

en: Learn how to use this printer
target: Aprinde kimint rexhe so cisse sicrirece chal

en: Leaving in %d seconds
target: Dji va cwiter dins %d segondes

en: Lebanon
target: Liban

en: Left "Windows" key
target: Li tape «Windows» di hintche

en: Left Alt key
target: Li tape Alt di hintche

en: Left Control key
target: Li tape Control di hintche

en: Left Shift key
target: Li tape Shift di hintche

en: Let me pick any driver
target: Leyîz mu tchoezi tot l' minme ké mineu

en: Level
target: Livea

en: Level %s
target: Livea %s

en: Lexmark inkjet configuration
target: Apontiaedje del sicrirece Lexmark inkjet

en: LiLo and Bootsplash themes installation successful
target: L' astalaedje di lilo et des tinmes del waitroûle d' enondaedje a stî comufåt

en: Libya
target: Libeye

en: License
target: Licince

en: License agreement
target: Acoird sol licince

en: Lilo message not found
target: Li messaedje di lilo n' a nén stî trové

en: Lilo screen
target: Waitroûlêye di lilo

en: Lilo/grub mode
target: Môde di lilo/grub

en: Linux Standard Base. Third party applications support
target: Li «Linux Standard Base». Sopoirt po les programes tîces

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
target: Li forveyou sierveu Linux, eployî po fé on sierveu di hôte performance
    et di hôte disponibilité (high-availability).

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
target: Pa côps linuxconf va fé totès sôres di bouyes å moumint di
    l' enondaedje po wårder l' apontiaedje do sistinme.

en: List of data to restore:
target: Djivêye des dnêyes a rapexhî:

en: List users on display managers (kdm and gdm)
target: Håyner li djivêye des uzeus ezès manaedjeus di håynaedje (kdm eyet gdm)

en: Listed here are the existing Linux partitions detected on your hard drive.
    You can keep the choices made by the wizard, since they are good for most
    common installations. If you make any changes, you must at least define a
    root partition ("/"). Do not choose too small a partition or you will not
    be able to install enough software. If you want to store your data on a
    separate partition, you will also need to create a "/home" partition
    (only possible if you have more than one Linux partition available).
    
    Each partition is listed as follows: "Name", "Capacity".
    
    "Name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard drive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". For IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
target: Chal pa dzeur i gn a ene djivêye des pårticions Linux k' i gn a so vosse
    deure plake et ki on stî detectêyes. Vos ploz wårder les tchuzes fwaites
    pa l' macrea, ele sont comufåt po les cas les pus comons.
    Si vos les voloz candjî vos dvoz fé å moens ene pårticion raecene («/»).
    Ni prindoz nén ene trop ptite grandeu ôtrumint vos n' pôrîz astaler åjheymint
    des programes, fåte di plaece. Si vos vloz mete vos dnêyes so ene pårticion
    diferinne, vos dvroz ossu fé ene po «/home» (çou ki vos pôroz fé seulmint si
    vos avoz pus d' ene pårticion del sôre Linux).
    
    Pol informåcion, tchaeke pårticion est mostrêye come çoula: «no», «grandeu».
    
    Li «no» est costrût come çouchal: «sôre del deure plake» + «limero del deure plake» +
    «limero del pårticion» (par egzimpe, hd+a+1 --> «hda1»)
    
    Li «sôre del deure plake» est «hd» si vosse deure plake est del sôre IDE,
    oudonbén «sd» si elle est del sôre SCSI.
    
    Li «limero del deure plake» est todi ene lete pa drî «hd» ou «sd».
    Avou les plakes IDE on a:
    
       * «a» pol plake mwaisse sol prumî controleu IDE,
    
       * «b» pol plake esclåve sol prumî controleu IDE,
    
       * «c» pol plake mwaisse sol deujhinme controleu IDE,
    
       * «d» pol plake esclåve sol deujhinme controleu IDE.
    
    Avou les plakes SCSI, «a» vout dire «prumire deure plake», «b» vout dire «deujhinme deure plake», evnd...

en: Lithuania
target: Litwaneye

en: Lithuanian "number row" QWERTY
target: Lituanyinne QWERTY (roye des limeros)

en: Lithuanian "phonetic" QWERTY
target: Lituanyinne QWERTY (fonetike)

en: Lithuanian AZERTY (new)
target: Lituanyinne AZERTY (novele modêye)

en: Lithuanian AZERTY (old)
target: Lituanyinne AZERTY (viye modêye)

en: Load from floppy
target: Tcherdjî a pårti d' ene plakete

en: Load setting
target: Apontiaedjes pol tchedje

en: Load the drivers for your usb devices.
target: Tcherdjî les mineus po vos éndjins USB.

en: Load/Save on floppy
target: Tcherdjî di/schaper e ene plakete

en: Loading from floppy
target: Tcherdjant a pårti d' ene plakete

en: Loading module %s failed.
    Do you want to try again with other parameters?
target: I gn a åk ki n' a nén stî tot tcherdjant li module %s.
    Voloz vs sayî co on côp avou des ôtes parametes?

en: Loading printer configuration... Please wait
target: Dji tchedje l' apontiaedje del sicrirece... tårdjîz s' i vs plait

en: Local Network adress
target: Adresse sol rantoele locåle

en: Local Printer
target: Sicrirece locåle

en: Local Printers
target: Sicrireces locåles

en: Local files
target: Fitchîs locås

en: Local measure
target: Mezuraedje locå

en: Local network(s)
target: Rantoele(s) locåle(s)

en: Local printer
target: Sicrirece locåle

en: Location
target: Eplaeçmint

en: Location of auto_install.cfg file
target: Eplaeçmint do fitchî d' astalaedje otomatike «auto_install.cfg»

en: Location on the bus
target: Eplaeçmint sol bus

en: Logical volume name
target: No do volume lodjike

en: Login ID
target: ID d' elodjaedje

en: Login name
target: No d' elodjaedje

en: Logitech CC Series with Wheel emulation
target: Logitech CC Series avou rôlete emulêye

en: Logitech Mouse (serial, old C7 type)
target: Logitech Mouse (séreye, viye sôre C7)

en: Logitech Mouse (serial, old C7 type) with Wheel emulation
target: Logitech Mouse (séreye, viye sôre C7) avou rôlete emulêye

en: Logitech MouseMan with Wheel emulation
target: Logitech MouseMan avou rôlete emulêye

en: Logs
target: Djournå

en: Looking at packages already installed...
target: Dji cwir après les pacaedjes ki sont ddja astalés...

en: Looking for available packages and rebuilding rpm database...
target: Dji cwir après les pacaedjes k' i gn a et rfé l' båze di dnêyes rpm...

en: Looking for available packages...
target: Dji cwir après les pacaedjes k' i gn a

en: Loopback file name:
target: No do fitchî loopback:

en: Loopback file name: %s
target: No do fitchî loopback: %s

en: Loopback file(s):
       %s
target: Fitchî(s) loopback:
       %s

en: Luxembourg
target: Lucsimbork

en: MB
target: Mo

en: MOVE YOUR WHEEL!
target: BODJÎZ L' RÔLETE!

en: Macedonia
target: Macedoneye

en: Macedonian
target: Macedonyinne

en: Mail
target: Emilaedje

en: Mail Server
target: Sierveu d' emilaedje

en: Mail alert
target: Abranle pa emile

en: Mail alert configuration
target: Apontiaedje des abranles pa emile

en: Make kernel message quiet by default
target: Èn nén håyner les messaedjes do nawea come prémetowe dujhance

en: Making printer port available for CUPS...
target: Dji rind les pôrts des scrireces disponibes po CUPS...

en: Malaysia
target: Malezeye

en: Malta
target: Male

en: Maltese (UK)
target: Maltesse (UK)

en: Maltese (US)
target: Maltesse (US)

en: Mandatory package %s is missing
target: I manke li pacaedje obligatwere %s

en: Mandrake Bug Report Tool
target: Usteye di rapoirtaedje di bugs di Mandrake

en: Mandrake Control Center
target: Cinte di contrôle di Mandrake

en: Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful tool to fully adapt your computer to the use you make of it. Configure and customize elements such as the security level, the peripherals (screen, mouse, keyboard...), the Internet connection and much more!
target: Mandrake Linux 9.2 vént avou li Cinte di Contrôle di Mandrake, ene poujhante usteye po ttafwaitmint apontyî et mete a vosse mode so voste éndjole. Apontyîz des sacwès come li livea di såvrité, les éndjins (waitroûle, sori, taprece, sicanrece, sicrirece,...), li raloyaedje al daegntoele et co hay!

en: Mandrake Linux 9.2: the ultimate development platform
target: Mandrake Linux 9.2 est ene clapante platfôme di programaedje.

en: Mandrake Linux Installation %s
target: Astalåcion di Mandrake Linux %s

en: Mandrake Linux Printer Management Tool
target: Usteye di manaedjmint des scrireces di Mandrake

en: Mandrake Linux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
target: Vos poloz tchoezi des ôtes lingaedjes ki sront disponibes dispoy
    l' astalåcion po les uzeus s' endè siervi.

en: Mandrake Online
target: MandrakeOnline (Mandrake so fyis)

en: Mandrake Terminal Server Configuration
target: Apontiaedje do sierveu di terminås di Mandrake

en: Mandrake Tools Explanation
target: Esplicaedjes des usteyes di Mandrake

en: Mandrake's multipurpose configuration tool
target: Usteye d' apontiaedje di totes sôres di Mandrake

en: MandrakeSoft has designed exclusive tools to create the most secured Linux version ever: Draksec, a system security management tool, and a strong firewall are teamed up together  in order to highly reduce hacking risks.
target: MandrakeSoft a-st ahivé des usteyes po fé li modêye di Linux k' aconte li pus li såvrité: Draksec, ene usteye di manaedjaedje del såvrité do sistinme, eyet on poujhant côpe feu metous eshonne po vs permete di responde a tos vos problinmes di såvrité et vs mete a houte des hacneus.

en: MandrakeSoft has selected the best software for you
target: MandrakeSoft a relî por vos les meyeus programes

en: Manual configuration
target: Apontiaedje manuel

en: March
target: Måss

en: Marshall Islands
target: Iyes Marshall

en: Martinique
target: Martinike

en: Matching
target: Avou

en: Mauritius
target: Maurice

en: Mayotte
target: Mayote

en: Media class
target: Classe di media

en: Messages
target: Messaedjes

en: Mexico
target: Mecsike

en: Micronesia
target: Micronezeye

en: Minimal install
target: Astalåcion minimåle

en: Minute
target: Munute

en: Model
target: Modele

en: Model name
target: No do modele

en: Modify
target: Candjî

en: Modify RAID
target: Candjî l' RAID

en: Modify printer configuration
target: Candjî l' apontiaedje del sicrirece

en: Module configuration
target: Apontiaedje do module

en: Module name
target: No do module

en: Module options:
target: Tchuzes do module:

en: Monday
target: Londi

en: Mongolia
target: Mongoleye

en: Mongolian (cyrillic)
target: Mongole (cirilike)

en: Monitor
target: Waitroûle

en: Monitor
    
       The installer will normally automatically detect and configure the
    monitor connected to your machine. If it is incorrect, you can choose from
    this list the monitor you actually have connected to your computer.
target: Waitroûle
    
        L' astaleu fwait normålmint li deteccion eyet apontiaedje otomatike
    del waitroûle raloyeye a voste éndjole. Si ça n' va nén tot seu, vos ploz
    tchoezi vosse waitroûle dins ene djivêye.

en: Monitor HorizSync: %s
target: Frécwénce di coûtchî del waitroûle: %s

en: Monitor VertRefresh: %s
target: Frécwénce d' astampé del waitroûle: %s

en: Monitor: %s
target: Waitroûle: %s

en: Month
target: Moes

en: More
target: Co des ôtes

en: More Options
target: D' ôtès tchuzes

en: More than one Microsoft partition has been detected on your hard drive.
    Please choose which one you want to resize in order to install your new
    Mandrake Linux operating system.
    
    Each partition is listed as follows: "Linux name", "Windows name"
    "Capacity".
    
    "Linux name" is structured: "hard drive type", "hard drive number",
    "partition number" (for example, "hda1").
    
    "Hard drive type" is "hd" if your hard dive is an IDE hard drive and
    "sd" if it is a SCSI hard drive.
    
    "Hard drive number" is always a letter after "hd" or "sd". With IDE
    hard drives:
    
     * "a" means "master hard drive on the primary IDE controller";
    
     * "b" means "slave hard drive on the primary IDE controller";
    
     * "c" means "master hard drive on the secondary IDE controller";
    
     * "d" means "slave hard drive on the secondary IDE controller".
    
    With SCSI hard drives, an "a" means "lowest SCSI ID", a "b" means
    "second lowest SCSI ID", etc.
    
    "Windows name" is the letter of your hard drive under Windows (the first
    disk or partition is called "C:").
target: Chal pa dzeur i gn a ene djivêye des pårticions Windows k' i gn a so vosse deure plake et ki on stî detectêyes. Tchoezixhoz li cene ki vos vloz candjî si grandeu, s' i vs plait.
    
    Pol informåcion, tchaeke pårticion est mostrêye come çoula:
    «no Linux», «no Windows», «grandeu».
    
    Li «no Linux» est costrût come çouchal:
    «sôre del deure plake» + «limero del deure plake» + «limero del pårticion» (par egzimpe, hd+a+1 --> «hda1»)
    
    Li «sôre del deure plake» est «hd» si vosse deure plake est del sôre IDE, oudonbén «sd» si elle est del sôre SCSI.
    
    Li «limero del deure plake» est todi ene lete pa drî «hd» ou «sd».
    Avou les plakes IDE on a:
    
       * «a» pol plake mwaisse sol prumî controleu IDE,
    
       * «b» pol plake esclåve sol prumî controleu IDE,
    
       * «c» pol plake mwaisse sol deujhinme controleu IDE,
    
       * «d» pol plake esclåve sol deujhinme controleu IDE.
    
    
    Avou les plakes SCSI, «a» vout dire «prumire deure plake», «b» vout dire «deujhinme deure plake», evnd...
    
    Li «no Windows» est li lete ki Windows eploye po-z idintifyî li pårticion (par egzimpe li prumire pårticion Windows del prumire deure plake est lomêye «C:»).

en: Morocco
target: Marok

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
target: Bråmint di ces valixhances chal ont stî cwerowes
    sol sistinme k' est en alaedje.
    Vos les ploz candjî s' i fåt.

en: Mount
target: Monter

en: Mount options
target: Tchuzes pol montaedje

en: Mount point
target: Pont di montaedje

en: Mount point:
target: Pont di montaedje:

en: Mount points must begin with a leading /
target: Les ponts di montaedje dvèt comincî avou on '/'

en: Mount points should contain only alphanumerical characters
target: Les ponts di montaedje dvèt aveur seulmint des letes et des chifes

en: Mount the file system read-only.
target: Monter l' sistinme di fitchîs e môde lére-seulmint.

en: Mounted
target: Montêye

en: Mounting partition %s
target: Montant li pårticion %s

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
target: Monte et dismonte les ponts di montaedje po Network File System (NFS), 
    SMB (Lan Manager/Windows) et NCP (NetWare).

en: Mouse
target: Sori

en: Mouse Port
target: Pôrt del sori

en: Mouse device: %s
target: Éndjin del sori: %s

en: Mouse test
target: Saye del sori

en: Mouse type: %s
target: Sôre di sori: %s

en: Move
target: Bodjî

en: Move files to the new partition
target: Bodjî les fitchîs viè l' novele pårticion

en: Move selected rule down one level
target: Dischinde li tchoezeye rîle d' on livea

en: Move selected rule up one level
target: Monter li tchoezeye rîle d' on livea

en: Moving
target: Bodjant

en: Moving files to the new partition
target: Dji bodje les fitchîs viè l' novele pårticion

en: Moving partition...
target: Bodjant li pårticion...

en: Mozambique
target: Mozambike

en: Multi-function device
target: Éndjin multi-fonccions

en: Multi-function device on HP JetDirect
target: Éndjin multi-fonccions so ene sicrirece HP Jetdirect

en: Multi-function device on USB
target: Éndjin USB multi-fonccions

en: Multi-function device on a parallel port
target: Éndjin multi-fonccions so pôrt paralele

en: Multi-function device on parallel port #%s
target: Éndjin multi-fonccions sol pôrt paralele #%s

en: Multi-head configuration
target: Apontiaedje po-z aveur pus d' ene waitroûle

en: Multimedia station
target: Posse multimedia

en: Multisession CD
target: CD multi-session

en: Myanmar
target: Miyanmar

en: Myanmar (Burmese)
target: Birmande

en: NCP queue name missing!
target: Nou no d' caweye NCP!

en: NCP server name missing!
target: Nou no d' sierveu NCP!

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
target: NFS est on protocole populaire po pårtaedjî des fitchîs so les rantoeles TCP/IP.
    Ci siervice chal c' est po-z aveur li fonccionålité di blocaedje
    di fitchîs pa NFS.

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
target: NFS est on protocole populaire po pårtaedjî des fitchîs so les rantoeles TCP/IP.
    Ci siervice chal c' est po-z aveur on sierveu NFS, ki est apontyî
    viè l' fitchî /etc/exports.

en: NFS server, SMB server, Proxy server, ssh server
target: Sierveu NFS, sierveu SMB, sierveu proxy, sierveu SSH

en: NIS Domain
target: Dominne NIS

en: NIS Server
target: Sierveu NIS

en: NO
target: NENI

en: NONE
target: NOUK

en: NOT FOUND
target: NÉN TROVÉ

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
target: NOTE: Sorlon li modele del sicrirece eyet li sistinme d' eprimaedje, i gn årè mezåjhe d' astaler disk' a %d Mo di pacaedjes di rawete.

en: NTP Server
target: Sierveu NTP

en: Name
target: No

en: Name Servers:
target: Sierveus d' nos:

en: Name of printer
target: No del sicrirece

en: Name of printer should contain only letters, numbers and the underscore
target: Li no del scrirece doet aveur seulmint des letes, des chifes et li sine «sorlignî» (_)

en: Name of the profile to create (the new profile is created as a copy of the current one) :
target: No do profil a fé (li novea profil va esse ene copeye di ci do moumint avou on novea no):

en: Name/IP address of host:
target: No ou adresse IP do lodjoe:

en: Name:
target: No:

en: Namibia
target: Namibeye

en: Nauru
target: Nawuru

en: Need hostname, username and password!
target: Dj' a mezåjhe do no d' lodjoe, do no d' uzeu eyet do scret!

en: Need to create /etc/dhcpd.conf first!
target: Vos dvoz askepyî /etc/dhcpd.conf d' aprume!

en: Need to restart the Display Manager for full changes to take effect. 
    (service dm restart - at the console)
target: Li manaedjeu di håynaedje doet esse renondé po tos les candjmints prinde efet.
    (tapez «service dm restart» el conzôle)

en: Net Boot Images
target: Imådjes po-z enonder pal rantoele

en: Net Device
target: Éndjin rantoele

en: Net Method:
target: Metôde rantoele:

en: NetWare Printer Options
target: Tchuzes scrirece NetWare

en: Netherlands
target: Olande

en: Netmask
target: Maske rantoele

en: Netmask:
target: Maske rantoele:

en: Network
target: Rantoele

en: Network %s
target: Rantoele %s

en: Network & Internet
target: Rantoele locåle & daegnrece

en: Network & Internet Configuration
target: Apontiaedje del Rantoele

en: Network Computer (client)
target: Copiutrece rantoele (cliyint)

en: Network Computer server
target: Copiutrece sierveu sol rantoele

en: Network Configuration
target: Apontiaedje del Rantoele

en: Network Configuration Wizard
target: Macrea d' apontiaedje del rantoele

en: Network Hotplugging
target: Tchôcaedje a tchôd del rantoele

en: Network Monitoring
target: Corwaitaedje del rantoele

en: Network Options
target: Tchuzes pol rantoele

en: Network configuration
target: Apontiaedje del rantoele

en: Network configuration (%d adapters)
target: Apontiaedje del rantoele (%d adaptoes)

en: Network functionality not configured
target: Li sopoirt del rantoele n' a nén stî apontyî

en: Network interface
target: Eterface rantoele

en: Network interface already configured
target: L' eterface rantoele est ddja apontieye

en: Network printer "%s", port %s
target: Sicrirece rantoele «%s», pôrt %s

en: Network printer (TCP/Socket)
target: Sicrirece rantoele (TCP/soket)

en: New
target: Novea

en: New Caledonia
target: Nouve Caledonreye

en: New Zealand
target: Nouve Zelande

en: New devfs device
target: Novea éndjin devfs

en: New printer name
target: Novea no del sicrirece

en: New profile...
target: Novea profil...

en: New size in MB:
target: Novele grandeu e Mo:

en: New user list:
target: Novelle djivêye di l' uzeu:

en: Newzealand
target: Nouve-Zelande

en: Next
target: Shuvant

en: Next ->
target: Shuvant ->

en: Nicaragua
target: Nicaragwa

en: Niger
target: Nidjer

en: Nigeria
target: Nidjeria

en: Niue
target: Niuwé

en: No
target: Neni

en: No (experts only)
target: Neni (po les spepieus)

en: No CD device defined!
target: Noû éndjin léjheu di plakes lazer di defini!

en: No CD or DVD image found, please copy the installation program and rpm files.
target: Nole imådje di CD ou DVD di trovêye, copyîz les programes et fitchîs rpm s' i vs plait.

en: No CD-R/DVD-R in drive!
target: Nou CDR/DVDR e l' léjheu!

en: No ISDN PCI card found. Please select one on the next screen.
target: Nole cåte RDIS PCI di trovêye. Tchoezixhoz ene dins l' djivêye ki shût.

en: No Internet Connection Sharing has ever been configured.
target: Li pårtaedje do raloyaedje al rantoele daegnrece n' a måy stî apontyî.

en: No Ip
target: Nole adresse IP

en: No Mask
target: Nou masse rantoele

en: No NIC selected!
target: Nou NIC di tchoezi!

en: No Sound Card detected!
target: Nole cåte son di detectêye!

en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Nole cåte son a stî detectêye so voste éndjole. Acertinez vs k' ene cåte son ricnoxhowe pa Linux est bén sol copiutrece.
    
    Vos ploz viziter nosse båze di dnêyes del sopoirtêye éndjolreye so:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No TV Card detected!
target: Nole cåte tévé di detectêye!

en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Nole cåte tévé a stî detectêye so voste éndjole. Acertinez vs k' ene cåte videyo/tévé ricnoxhowe pa Linux est bén raloyeye al copiutrece.
    
    Vos ploz viziter nosse båze di dnêyes del sopoirtêye éndjolreye so:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No additional information
    about this service, sorry.
target: Mande escuzes, mins dj' a pont d' ôtès
    informåcions so ci siervice chal.

en: No alternative driver
target: Nou mineu alternatif

en: No browser available! Please install one
target: Nou betchteu di disponibe! Astalez onk s' i vs plait

en: No browser is installed on your system, Please install one if you want to browse the help system
target: I gn a nou betchteu waibe d' astalé so vosse sistinme, astalez è onk si vos vloz foyter li sistinme d' aidance.

en: No changes to backup!
target: Nou candjmint po ndè fé ene copeye di såvrité!

en: No configuration file found 
    please click Wizard or Advanced.
target: Nou fitchî d' apontiaedje di trové.
    clitchîz so «Macrea» ou «Sipepieus» s' i vs plait.

en: No configuration, please click Wizard or Advanced.
target: Nou apontiaedje di fwait, clitchîz so Macrea ou Spepieus s' i vs plait.

en: No details
target: Po vey les rclames

en: No devices found
target: Nol éndjin di trové

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
target: Nole cåte rantoele a stî detectêye so vosse sistinme.
    Dji n' pou nén apontyî cisse sôre di raloyaedje.

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
target: Nole cåte rantoele a stî detectêye so vosse sistinme.
    Eployîz l' usteye d' apontiaedje del éndjolreye s' i vs plait.

en: No floppy drive available
target: Nou léjheu di plaketes disponibe

en: No floppy drive available!
target: Nou léjheu di plaketes disponibe!

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
target: I gn a pont del plaece po on secteu d' enondaedje di 1 Mo! L' astalåcion continowrè, mins i vos fårè fé li pårticion d' enondaedje avou DiskDrake po poleur enonder vosse sistinme.

en: No hard drives found
target: Nole deure plake di trovêye

en: No image found
target: Nole imådje di trovêye

en: No kernel selected!
target: Nou nawea di tchoezi!

en: No known driver
target: Nou mineu di cnoxhou

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target: Nole sicrirece locåle di trovêye! Po-z end astaler manuwelmint ene dinez on no d' éndjin sol roye d' intrêye (Les pôrts paraleles: /dev/lp0, /dev/lp1,..., corespondèt a LPT1:, LPT2:,..., Li 1re sicrirece USB: /dev/usb/lp0, li 2inme sicrirece USB: /dev/usb/lp1,...).

en: No mouse
target: Nole sori

en: No net boot images created!
target: Nole imådje po-z enonder pal rantoele di fwaite!

en: No network adapter on your system!
target: Nole cåte rantoele so voste éndjole!

en: No network card
target: Nole cåte rantoele di trovêye

en: No open source driver
target: Nou mineu libe di cnoxhou

en: No partition available
target: nole pårticion di disponibe

en: No password
target: Nou scret

en: No password prompt on %s at port %s
target: Nole dimande di scret so %s sol pôrt %s

en: No printer
target: Nole sicrirece

en: No printer found!
target: Nole sicrirece di trovêye!

en: No remote machines
target: Nole éndjole då lon

en: No sharing
target: Nou pårtaedje

en: No sound card detected. Try "harddrake" after installation
target: Nole cåte son di detectêye. Sayîz «harddrake» après l' astalåcion

en: No tape in %s!
target: Nole binde dins %s!

en: No test pages
target: Nén rexhe les pådjes di saye

en: No, I don't want autologin
target: Neni, dji n' vou nén di l' elodjaedje otomatike

en: NoVideo
target: NoleVidéyo

en: None
target: Nole

en: Norfolk Island
target: Iye Norfolk

en: Normal Mode
target: Môde normå

en: Normal modem connection
target: Raloyaedje viè modem normå

en: Northern Mariana Islands
target: Iyes Marianes bijhreces

en: Norway
target: Norvedje

en: Norwegian
target: Norvedjyinne

en: Not connected
target: Nén raloyî

en: Not enough free space for auto-allocating
target: Nén del plaece libe assez po l' atribuwaedje otomatike

en: Not enough free space to allocate new partitions
target: Nén del plaece libe assez po fé des noveles pårticions

en: Not enough partitions for RAID level %d
target: I gn a nén des pårticions assez pol livea RAID %d

en: Not enough swap space to fulfill installation, please add some
target: Li swap n' est nén grande assez po l' astalaedje: vos e dvoz radjouter.

en: Not erasable media!
target: Li sopoirt n' est nén disfaçåve

en: Not formatted
target: Nén abwesnêye

en: Not installed
target: Nén astalé

en: Not the correct tape label. Tape is labelled %s.
target: C' est nén l' binde avou l' boune etikete. Li binde a l' etikete %s.

en: Nothing to do
target: Rén a fé

en: Notice
target: Note

en: Novell server "%s", printer "%s"
target: Sierveu Novell «%s», sicrirece «%s»

en: November
target: Nôvimbe

en: Now, it's time to select a printing system for your computer. Other OSs may
    offer you one, but Mandrake Linux offers two. Each of the printing system
    is best suited to particular types of configuration.
    
     * "%s" -- which is an acronym for ``print, don't queue'', is the choice
    if you have a direct connection to your printer, you want to be able to
    panic out of printer jams, and you do not have networked printers. ("%s"
    will handle only very simple network cases and is somewhat slow when used
    with networks.) It's recommended that you use "pdq" if this is your first
    experience with GNU/Linux.
    
     * "%s" - `` Common Unix Printing System'', is an excellent choice for
    printing to your local printer or to one halfway around the planet. It is
    simple to configure and can act as a server or a client for the ancient
    "lpd " printing system, so it compatible with older operating systems
    which may still need print services. While quite powerful, the basic setup
    is almost as easy as "pdq". If you need to emulate a "lpd" server, make
    sure you turn on the "cups-lpd " daemon. "%s" includes graphical
    front-ends for printing or choosing printer options and for managing the
    printer.
    
    If you make a choice now, and later find that you don't like your printing
    system you may change it by running PrinterDrake from the Mandrake Control
    Center and clicking the expert button.
target: Chal, vos tchoezixhoz li ké sistinme d' eprimaedje vos vloz eployî
    so vosse copiutrece. Des ôtes sistinmes d' operance k' i gn a
    vos dnèt onk, mins Mandrake Linux vos lait tchoezi inte deus, tchaeke onk
    estant l' meyeu dins on cas dné.
    
     * «%s» - ki vout dire «print, don't queue» (eprimer sins caweye), est
    li tchuze a-z eployî si vosse copiutrece est raloyeye directumint a vosse
    copiutrece et ki vos vloz divni araedjî cwand l' papî s' bôre... et ki
    vos n' avoz nén des scrireces sol rantoele locåle («%s» n' sait manaedjî
    ki des apontiaedjes rantoele foirt simpes eyet il est ene miete londjin
    po-z eprimî pal rantoele). Tchoezixhoz «pdq» si vos estoz on mieraprindisse
    avou GNU/Linux.
    
     «%s» - «Common Unix Printing System» (sistinme di comon eprimaedje po
    Unix), est clapant po l' eprimaedje so vosse sicrirece locåle ossu bén
    ki les cenes a l' ôte costé del bole. Il est simpe et pout fé do cliyint
    come do sierveu pol vî sistinme d' eprimaedje «lpd». Ça vout dire k' il
    est copatibe avou les sistinme k' i gn aveut davance. I pout fé bråmint
    d' afwaires, mins l' apontiaedje di båze est cåzu ossu åjhey ki l' ci
    di «pdq». Si vos avoz mezåjhe d' emuler on sierveu «lpd», i vs fåt mete
    en alaedje li démon «cups-lpd». %s a des eterfaces grafikes po tchoezi
    les scrireces, apontyî les tchuzes prôpes a tchaeskene et po-z eprimî.
    
    Si vos tchoezixhoz asteure, et ki pus tård vos n' inmez nén vosse sistinme
    d' eprimaedje, vos l' poloz åjheymint candjî avou l' usteye d' apontiaedje
    des scrireces, a-z enonder a pårti do cinte di contrôle di Mandrake, tot
    clitchant sol boton «Sipepieus».

en: Now, you can run xawtv (under X Window!) !
target: Asteure, vos ploz enonder xawtv (e mode grafike!) !

en: Number of buttons
target: Nombe di botons

en: Number of capture buffers:
target: Nombe di tampons po les waitroûlêyes:

en: OK
target: 'l est bon

en: OK to restore the other files.
target: I va po rapexhî les ôtes fitchîs.

en: OKI winprinter configuration
target: Apontiaedje del sicrirece OKI winprinter

en: OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.
    What's more, OSS drivers all reinvent the wheel.
    
    ALSA (Advanced Linux Sound Architecture) is a modularized architecture which
    supports quite a large range of ISA, USB and PCI cards.
    
    It also provides a much higher API than OSS.
    
    To use alsa, one can either use:
    - the old compatibility OSS api
    - the new ALSA api that provides many enhanced features but requires using the ALSA library.
target: OSS (Open Sound System) a stî li prumire API pol sopoirt do son. C' est ene API indepindante do SO (ele egzistêye pol plupårt des sistinmes unix) mins c' est ossu ene API foirt båzike eyet limitêye.
    Et al copete do martchî, tchaeke mineu OSS radvinte li rowe.
    
    ALSA (Advanced Linux Sound Architecture) est ene årtchitecteure a modules ki sopoite ene lådje fôrtchete di cåtes ISA, USB eyet PCI.
    
    I fornixh ossu ene API di pus hôt livea ki OSS.
    
    Po-z eployî alsa, on pout eployî ossu bén:
    - li viye API di copatibilité avou OSS
    - li nouve API d' ALSA ki fornixh sacwantes fonccionålités stindêyes mins a mezåjhe del livreye ALSA.

en: October
target: Octôbe

en: Office Workstation
target: Posse di buro

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
target: Programes di buro: aspougneus di tecse (kword, abiwrod), tåvleus (kspread, gnumeric), håyneus pdf, evnd.

en: Ok
target: 'l est bon

en: Old device file
target: Vî fitchî d' éndjin

en: Old user list:
target: Viye djivêye di l' uzeus:

en: On CD-R
target: so plake lazer

en: On CUPS server "%s"
target: Sol sierveu CUPS «%s»

en: On Floppy
target: So plakete

en: On Hard Drive
target: sol deure plake

en: On Tape Device
target: so binde

en: On boot
target: A l' enondaedje

en: Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame ("Information")
target: On côp ki vos avoz tchoezi on éndjin, vos pôroz vey des esplikêyes dins les tchamps håynés a droete («Informåcion»)

en: Open Firmware Delay
target: Tårdjaedje di l' Open Firmware

en: Optimize your security by using Mandrake Linux
target: Amidrez vosse livea di såvrité tot-z eployant Mandrake Linux

en: Option %s must be a number!
target: Li tchuze %s doet esse on limero!

en: Option %s must be an integer number!
target: Li tchuze %s doet esse on limero etir!

en: Option %s out of range!
target: Li tchuze %s est foû limites!

en: Option ``Restrict command line options'' is of no use without a password
target: Li tchuze «Rastrinde les tchuzes del roye di cmande» ni sieve a rén
    sins scret

en: Options
target: Tchuzes

en: Options
    
       Here you can choose whether you want to have your machine automatically
    switch to a graphical interface at boot. Obviously, you want to check
    "%s" if your machine is to act as a server, or if you were not successful
    in getting the display configured.
target: Tchuzes
    
       Chal vos ploz tchoezi si vos vloz kel eterface grafike soeye en alaedje cwand
    l' éndjole est enondêye. Bén seur, si voste éndjole va-st ovrer come on sierveu,
    ou si vos n' arivez nén a-z apontyî l' cåte videyo, vos ploz risponde «%s».

en: Options: %s
target: Tchuzes: %s

en: Other
target: Ôte

en: Other (not drakbackup) keys in place already
target: Des ôtès clés (nén da drakbackup) sont ddja e plaece

en: Other Graphical Desktops
target: Ôtes sicribannes grafikes

en: Other Media
target: Ôtes sopoirts

en: Other MultiMedia devices
target: Ôtes éndjins multimedia

en: Other OS (MacOS...)
target: Ôtes sistinmes d' operance (MacOS...)

en: Other OS (SunOS...)
target: Ôtes sistinmes d' operance (SunOS...)

en: Other OS (windows...)
target: Ôtes sistinmes d' operance (Windows...)

en: Other ports
target: Ôtes pôrts

en: Our full range of Linux solutions, as well as special offers on products and other "goodies", are available on our e-store:
target: Vos trovroz so nosse waibe di comiece so les fyis ene lådje fôrtchete di solucions Linux, et des propôzucions speciåles po les prodûts et les «agayons»

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
target: Li sopoirt PCMCIA c' est po sopoirter des sacwès come des cåtes rantoele
    ou des modems, avou les poirtåvès copiutreces. I n' srè nén enondé a moens
    di esse apontyî, adon c' est nén måva del leyî astalé minme so les éndjoles
    wice k' on n' s' e siervèt nén.

en: PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel.
target: I gn a pupont d' sopoirt PCMCIA avou les naweas 2.2. Eployîz on nawea 2.4 s' i vs plait.

en: PDQ - Print, Don't Queue
target: PDQ - Eprimî sins caweye

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
target: PDQ sopoite seulmint les scrireces locåles, les scrireces LPD å lon eyet les scrireces viè soket/TCP.

en: PLL setting:
target: Apontiaedje PLL:

en: POP and IMAP Server
target: Sierveu POP et IMAP

en: PXE Server Configuration
target: Apontiaedje do sierveu PXE

en: Package Group Selection
target: Tchoezi les groupes di pacaedjes

en: Package not installed
target: Pacaedje nén astalé

en: Package selection
target: Tchoezi les pacaedjes

en: Package:
target: Pacaedje:

en: Palestine
target: Palestene

en: Papua New Guinea
target: Papouwazeye Nouve Guinêye

en: Paraguay
target: Paragway

en: Parallel port #%s
target: Pôrt paralele #%s

en: Parameters
target: Parametes

en: Paranoid
target: Paranoyide

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
target: Pårticion prémetowe po-z enonder l' éndjole
        (po l' enondaedje di MS-DOS, nén po LILO)

en: Partition table of drive %s is going to be written to disk!
target: Li tåvlea di pårtixhaedje del plake %s va esse sicrîte sol plake!

en: Partition table type: %s
target: Sôre di tåvlea di pårtixhaedje: %s

en: Partitioning
target: Pårtixhaedje

en: Partitioning failed: %s
target: Li pårtixhaedje n' a nén stî: %s

en: Password
target: Sicret

en: Password (again)
target: Sicret (co ene feye)

en: Password history length
target: Longueu del istwere do scret

en: Password minimum length and number of digits and upcase letters
target: Minimoms pol longueu, nombe di chifes et di grandes letes pol sicret

en: Password required
target: I gn a mezåjhe do scret

en: Passwords are now enabled, but use as a networked computer is still not recommended.
target: Avou ci livea chal i gn a des mots di passe, mins c' est tolminme on livea
    di såvrité trop bas ki po l' eployî avou ene copiutrece raloyeye a ene rantoele.

en: Path
target: Tchimin

en: Path or Module required
target: I gn a mezåjhe do tchmin ou do module

en: Path selection
target: Tchoezixhaedje do tchmin

en: Perfectly adapt your computer to your needs thanks to the 11 available Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME 2.2, Window Maker, ...
target: Adaptez a l' idêye vosse copiutrece a vos mezåjhes, gråces åzès 11 eterfaces uzeu diferinnes ki vnèt avou Mandrake Linux, et ki polèt esse apontieyes a vosse gosse: KDE 3.1, GNOME 2.2, WindowMaker...

en: Periodic Checks
target: Verifiaedjes periodikes

en: Permission problem accessing CD.
target: Problinme di permissions po-z acceder å CD.

en: Peru
target: Perou

en: Philippines
target: Filipenes

en: Phone number
target: Limero di telefone

en: Photo memory card access on your HP multi-function device
target: Accès åzès cåtes memwere po les fotos so l' éndjin multi-fonccions HP

en: Photo test page
target: Pådje di saye cwålité foto

en: Pipe into command
target: Evoyî l' bouye a ene comande å truviè d' ene buze

en: Pipe job into a command
target: Evoyî l' bouye a ene comande å truviè d' ene buze

en: Please Wait... Applying the configuration
target: Tårdjîz s' i vs plait, dji mete en alaedje l' apontiaedje

en: Please be sure that the cron daemon is included in your services.
target: Acertinez vs ki l' demon «cron» est emey les siervices en alaedje.

en: Please check all users that you want to include in your backup.
target: Tchoezixhoz les uzeus ki vos vloz inclure dins l' copeye di såvrité.

en: Please choose a language to use.
target: Tchoezixhoz li lingaedje a eployî.

en: Please choose for each step whether it will replay like your install, or it will be manual
target: S' i vs plait, tchoezixhoz po tchaeke etape s' i l' fåt rifé come vos l' avoz fwait po voste astalaedje, ou s' i l' fåt fé manuwelmint

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
target: Tchoezixhoz si vos vloz tcherdjî ou schaper li tchuze des pacaedjes
    so ene plakete.
    Li cogne est l' minme ki po les plaketes fwaites pol oto-astalaedje.

en: Please choose the desired security level
target: Tchoezixhoz l' livea di såvrité ki vos vloz

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
target: Tchoezixhoz li prumî limero del fortchete di 10 ki vos vloz aspougnî,
    oudonbén vos ploz djusse taper so Enter po continuwer.
    Vosse tchuze?

en: Please choose the media for backup.
target: Tchoezixhoz li sopoirt po les copeyes di såvrité.

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
target: Tchoezixhoz li pôrt ki vosse sicrirece est raloyeye oudonbén dnez on no d' fitchî ou d' éndjin sol roye d' intrêye, s' i vs plait.

en: Please choose the port that your printer is connected to.
target: Tchoezixhoz li pôrt ki vosse sicrirece est raloyeye dzo.

en: Please choose the printer to which the print jobs should go or enter a device name/file name in the input line
target: S' i vs plait, tchoezixhoz li scrirece ki les bouyes d' eprimaedje sont-st evoyeyes dnez on no d' fitchî ou d' éndjin sol roye d' intrêye.

en: Please choose the printer to which the print jobs should go.
target: Tchoezixhoz li scrirece ki les bouyes d' eprimaedje î sront evoyeyes.

en: Please choose the printer you want to set up or enter a device name/file name in the input line
target: Tchoezixhoz li scrirece ki vos vloz apontyî oudonbén dnez on no d' fitchî ou d' éndjin sol roye d' intrêye, s' i vs plait.

en: Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Tchoezixhoz li scrirece ki vos vloz apontyî, s' i vs plait. Si apontiaedje srè fwait totafwaitmint otomaticmint. Si vosse sicrirece n' a nén stî detectêye comufåt, ou si vos inmez mî on apontiaedje diferin, metoz en alaedje «Apontiaedje manuel».

en: Please choose the time interval between each backup
target: Tchoezixhoz li tins inte deus fijhaedjes di copeyes di såvrité

en: Please choose what network adapter will be connected to your Local Area Network.
target: Tchoezixhoz kéne cåte rantoele va esse raloyeye a vosse rantoele locåle

en: Please choose what you want to backup
target: Tchoezixhoz çou k' vos vloz mete dins les copeyes di såvrité

en: Please choose where you want to backup
target: Tchoezixhoz so ké sopoirt vos vloz fé les copeyes di såvrité

en: Please choose which network adapter you want to use to connect to Internet.
target: Tchoezixhoz kéne cåte rantoele vos vloz eployî po vos raloyî al rantoele daegnrece

en: Please choose which network interface will be used for the dhcp server.
target: Tchoezixhoz kéne cåte rantoele vos vloz eployî pol sierveu dhcp.

en: Please choose which serial port your modem is connected to.
target: Tchoezixhoz li pôrt séreye ki vosse modem est raloyî dzo

en: Please choose which serial port your mouse is connected to.
target: Tchoezixhoz li pôrt séreye ki vosse sori est raloyeye dizo.

en: Please choose your country.
target: Tchoezixhoz vosse payis s' i vs plait.

en: Please choose your keyboard layout.
target: Tchoezixhoz li sôre di vosse taprece.

en: Please choose your mouse type.
target: Tchoezixhoz li sôre di vosse sori.

en: Please choose your type of mouse.
target: Tchoezixhoz li sôre di vosse sori.

en: Please click on a partition
target: Clitchîz so ene pårticion s' i vs plait

en: Please enter a package name.
target: Dinez on no d' pacaedje, s' i vs plait

en: Please enter summary text.
target: Dinez on tecse di rascourti s' i vs plait.

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
target: Chal, intrez l' apontiaedje IP di voste éndjole.
    Totafwait doet esse sicrît come ene adresse IP, avou des
    ponts inte les limeros (metans: 1.2.3.4).

en: Please enter the WebDAV server URL
target: Dinez l' hårdêye do sierveu WebDAV, s' i vs plait.

en: Please enter the name of the interface connected to the internet.
    
    Examples:
    		ppp+ for modem or DSL connections, 
    		eth0, or eth1 for cable connection, 
    		ippp+ for a isdn connection.
target: Dinez l' no del eterface rantoele k' est raloyeye al daegntoele.
    
    Egzimpes:
    		ppp+ po des raloyaedjes viè modem ou DSL, 
    		eth0, ou eth1 po des raloyaedjes viè cåbe, 
    		ippp+ po on raloyaedje viè RDIS (ISDN).

en: Please enter your email address below
target: Dinez voste adresse emile s' i vs plait

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
target: Intrez chal li no IP di voste éndjole (host name).
    Li no doet esse etir, metans: «mybox.mylab.myco.com».
    Vos poloz dner eto l' adresse IP del pasrele s' i gn en a ene.

en: Please enter your username, password and domain name to access this host.
target: Dinez vosse no d' uzeu, sicret eyet no d' dominne po-z aveur å lodjeu.

en: Please fill or check the field below
target: Rimplixhoz ou verifyîz les tchamps chal pa dzo

en: Please give a user name
target: Dinez on no d' uzeu, s' i vs plait

en: Please indicate where the auto_install.cfg file is located.
    
    Leave it blank if you do not want to set up automatic installation mode.
target: Dinez l' eplaeçmint do fitchî «auto_install.cfg» s' i vs plait.
    
    Leyîz l' e blanc si vos n' voloz nén apontyî li môde d' astalaedje otomatike.

en: Please indicate where the installation image will be available.
    
    If you do not have an existing directory, please copy the CD or DVD contents.
target: Dinez l' eplaeçmint di l' imådje d' astalåcion s' i vs plait.
    
    Si vos n' avoz nén on ridant k' egzistêye dedja, copyîz çou k' i gn a dins l' plake lazer.

en: Please insert floppy disk:
target: Metoz ene plakete divins l' léjheu:

en: Please insert the Boot floppy used in drive %s
target: Metoz li plakete d' enondaedje dvins li léjheu %s

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
target: Metoz li CDROM d' astalåcion dvins l' léjheu, s' i vs plait;
    et clitchîz so «'l est bon» on côp ki c' est fwait.
    Si vos n' l' avoz nén, clitchîz so «Rinoncî» po passer houte li metaedje a djoû.

en: Please insert the Update Modules floppy in drive %s
target: Metoz li plakete avou les modules metous a djoû dvins li léjheu %s

en: Please log out and then use Ctrl-Alt-BackSpace
target: Dislodjîz vs et adon siervoz vs di Ctrl-Alt-Backspace

en: Please make a backup of your data first
target: Fijhoz ene copeye di såvrité divant di tcheryî pus lon.

en: Please select data to backup...
target: Tchoezixhoz les dnêyes ki vos vloz ndè fé des copeyes di såvrité...

en: Please select data to restore...
target: Tchoezixhoz les dnêyes a rapexhî...

en: Please select media for backup...
target: Tchoezixhoz li sopoirt ki les copeyes di såvrité vont î esse copieyes...

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
target: Tchoezixhoz li bon pôrt.  Metans: li pôrt «COM1» dzo MS Windows si lome
    «ttyS0» dzo GNU/Linux.

en: Please select the device where your %s is attached
target: Tchoezixhoz l' éndjin ki vosse %s est raloyeye avou

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
target: Tchoezixhoz les pådjes di saye ki vos vloz rexhe s' i vs plait.
    Note: li pådje pol saye del cwålité foto pout bén prinde on long moumint a rexhe del sicrirece, avou des scrireces lazer ki n' ont nén beacôp d' memwere, i s' pout minme kel pådje ni rexhe måy.
    Dins l' plupårt des cas c' est assez avou l' pådje di saye sitandård.

en: Please test the mouse
target: Sayîz on pô vosse sori

en: Please test your mouse:
target: Sayîz vosse sori s' i vs plait:

en: Please try again
target: Sayîz co ene feye

en: Please wait
target: Tårdjîz on pô, s' i vs plait

en: Please wait, preparing installation...
target: Tårdjîz on pô s' i vs plait, dj' aprestêye l' astalaedje

en: Please wait, setting security level...
target: Tårdjîz on pô s' i vs plait, dji mete li livea di såvrité...

en: Please wait, setting security options...
target: Tårdjîz on pô s' i vs plait, dji mete les tchuzes di såvrité...

en: Please,
    type in your tv norm and country
target: S' i vs plait,
    dinez l' nôrme di vosse TV eyet vosse payis

en: Please, choose your keyboard layout.
target: Tchoezixhoz li sôre di vosse taprece.

en: Plug'n Play probing failed. Please select the correct monitor
target: Li sayaedje Plug'n Play a fwait berwete. Tchoezixhoz li sôre di waitroûle s' i vs plait

en: Poland
target: Pologne

en: Polish
target: Polonesse

en: Polish (qwerty layout)
target: Polonesse (cogne QWERTY)

en: Polish (qwertz layout)
target: Polonesse (cogne QWERTZ)

en: Poor
target: Pôve

en: Port
target: Pôrt

en: Port: %s
target: Pôrt: %s

en: Portuguese
target: Portuguesse

en: Post Install
target: Post-astalaedje

en: Post Uninstall
target: Post-disastalaedje

en: Post-install configuration
target: Apontiaedje di post-astalåcion

en: Postfix Mail Server
target: Sierveu d' emilaedje postfix

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
target: Postfix est ene usteye ki fwait voyaedjî les emiles d' ene éndjole a l' ôte.

en: Postfix mail server
target: Sierveu d' emilaedje postfix

en: PostgreSQL or MySQL database server
target: Sierveu båze di dnêyes PostgreSQL ou MySQL

en: Potential LAN address conflict found in current config of %s!
target: I pout î aveur on conflit d' adresses pol rantoele locåle
    avou l' apontiaedje do moumint po %s !

en: Precise RAM size if needed (found %d MB)
target: Grandeu del RAM, s' i fåt (dj' a trové %d Mo)

en: Preference:
target: Preferince:

en: Preferences
target: Preferinces

en: Preparing bootloader...
target: Dj' aprestêye l' enondrece

en: Preparing installation
target: Dj' aprestêye l' astalaedje

en: Preparing printer database...
target: Dji prepare les båzes di dnêyes des scrireces...

en: Press enter to boot the selected OS, 'e' to edit the
target: Tapez so Enter po-z enonder li S.O. tchoezi, so 'e' po-z aspougni

en: Preview
target: Vey divant

en: Print
target: Rexhe

en: Print Queue Name
target: No del caweye del scrirece

en: Print option list
target: Djivêye des tchuzes pol eprimaedje

en: Print test pages
target: Rexhe les pådjes di saye

en: Printer
target: Sicrirece

en: Printer "%s" on SMB/Windows server "%s"
target: Sicrirece «%s» sol sierveu SMB/Windows «%s»

en: Printer "%s" on server "%s"
target: Sicrirece «%s» sol sierveu «%s»

en: Printer %s
    What do you want to modify on this printer?
target: Sicrirece %s
    Cwè voloz vs candjî avou cisse sicrirece chal?

en: Printer Device URI
target: URI di l' éndjin del scrirece

en: Printer Management
target: Manaedjmint des scrireces

en: Printer Name
target: No del sicrirece

en: Printer Server
target: Sierveu di scrireces

en: Printer auto-detection
target: Deteccion otomatike des scrireces

en: Printer auto-detection (Local, TCP/Socket, and SMB printers)
target: Deteccion otomatike des scrireces (Locåles, TCP/soket eyet SMB)

en: Printer connection type
target: Sôre di raloyaedje del sicrirece

en: Printer default settings
target: Prémetous apontiaedjes pol sicrirece

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
target: Apontiaedjes pol prémetowe sicrirece
    
    Acertinez vs kel grandeu do papî eyet li sôre d' intche ou l' môde d' eprimaedje (cwand on les pout tchoezi) sont-st apontyîs comufåt. Et ossu ki l' apontiaedje del éndjolreye po les scrireces lazer (memwere, baks duplecs, baks di rawete) est fwait comufåt. Notez k' avou ene grande finté ou cwålité pol rexhowe l' eprimaedje pout esse bén pus londjin.

en: Printer host name or IP
target: Adresse IP ou no do lodjoe del scrirece

en: Printer host name or IP missing!
target: Nole adresse IP et nou no pol lodjoe del scrirece!

en: Printer manufacturer, model
target: Vindeu, modele del sicrirece

en: Printer manufacturer, model, driver
target: Vindeu, modele, mineu del sicrirece

en: Printer model selection
target: Tchuze do modele del sicrirece

en: Printer name, description, location
target: No, discrijhaedje, eplaeçmint del sicrirece

en: Printer on NetWare server
target: Sicrirece sor on sierveu NetWare

en: Printer on SMB/Windows 95/98/NT server
target: Sicrirece sor on sierveu SMB/Windows

en: Printer on parallel port #%s
target: Sicrirece sol pôrt paralele #%s

en: Printer on remote CUPS server
target: Sicrirece sor on sierveu CUPS å lon

en: Printer on remote lpd server
target: Sicrirece sor on sierveu lpd å lon

en: Printer options
target: Tchuzes pol scrirece

en: Printer sharing on hosts/networks:
target: Pårtaedje di scrireces so les lodjoes/rantoeles:

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
target: Printerdrake a comparé li no do modele trové avou li deteccion otomatike avou li djivêye des modeles di s' båze di dnêyes po vey li meyeuse corespondance. Cisse tchuze otomatike pout esse fåsse, sortot si vosse sicrirece ni s' trove nén el djivêye. Verifyîz d' abôrd si l' tchuze est coreke, et clitchîz so «Li modele est corek» si c' est insi, oudonbén so «Tchoezi li modele al mwin» si vos vloz l' candjî.
    
    Po vosse sicrirece Printerdrake a trové:
    
    %s

en: Printing
target: Eprimaedje

en: Printing on the printer "%s"
target: Dji rexhe sol sicrirece «%s»

en: Printing test page(s)...
target: Dji rexhe li/les pådje(s) di saye...

en: Printing/Photo Card Access on "%s"
target: Eprimaedje/Accès cåtes foto so «%s»

en: Printing/Scanning on "%s"
target: Eprimaedje/sicanaedje so «%s»

en: Printing/Scanning/Photo Cards on "%s"
target: Eprimaedje/sicanaedje/cåtes foto so «%s»

en: Prints into %s
target: Ki rexhe so %s

en: Problems installing package %s
target: Åk n' a nén stî cwand dj' astaléve li pacaedje %s

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.
target: Åk n' a nén stî tins di l' apontiaedje.
    Sayîz vosse raloyaedje avou «net_monitor» ou «mcc». Si vosse raloyaedje ni va nén, motoit k' vos dvrîz renonder l' apontiaedje

en: Processor ID
target: ID do processeu

en: Processors
target: Processeus

en: Profile
target: Profil

en: Profile to delete:
target: Profil a disfacer:

en: Profile:
target: Profil:

en: ProgressBar color selection
target: Tchuze del coleur pol bår d' avançmint

en: Property
target: Prôpietés

en: Protocol
target: Protocole

en: Protocol for the rest of the world
target: Protocole po les ôtes payis

en: Protocol for the rest of the world
    No D-Channel (leased lines)
target: Protocole po les ôtes payis 
     nou canå D (leased lines)

en: Provider dns 1 (optional)
target: 1î DNS do ahesseu (opcionel)

en: Provider dns 2 (optional)
target: 2inme DNS do ahesseu (opcionel)

en: Provider name (ex provider.net)
target: No do ahesseu (eg: walonet.be)

en: Provider phone number
target: Limero di telefone di l' ahesseu

en: Proxies configuration
target: Apontiaedje des proxies

en: Proxy should be http://...
target: Li proxy doet esse http://...

en: Puerto Rico
target: Porto Rico

en: Quit
target: Cwiter

en: Quit without saving
target: Cwiter sins schaper

en: Quit without writing the partition table?
target: Moussî foû sins scrire li tåvlea di pårtixhaedje?

en: RAID-disks %s
target: Plakes-RAID %s

en: Radio support:
target: Sopoirt pol radio:

en: Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough '0' (zeroes).
target: Li frécwénce doet aveur ene cawete «k», «M» ou «G» (par egzimpe, «2.46G» po ene frécwénce di 2.46 GHz), oudonbén radjoutez des zeros assez.

en: Raw printer
target: Eprimaedje direk

en: Raw printer (No driver)
target: Eprimaedje direk (sins mineu)

en: Re-configure interface and DHCP server
target: Rapontyî l' eterface et li sierveu DHCP

en: Re-generating list of configured scanners ...
target: Dji rfwait l' djivêye des scanreces d' apontieyes...

en: Re-submit
target: Evoyî cor on côp

en: Read
target: Lére

en: Read carefully!
target: Léjhoz avou atincion!

en: Read-only
target: Lére-seulmint

en: Read-write
target: Lére-sicrire

en: Reading data of installed printers...
target: Léjhant les dnêyes des scrireces d' astalêyes...

en: Reading printer data...
target: Léjhant les dnêyes del sicrirece...

en: Reading printer database...
target: Léjhant les båzes di dnêyes des scrireces...

en: Real name
target: Vraiy no

en: Reboot
target: Renonder l' éndjole

en: Reboot by the console user
target: Renonaedje pa l' uzeu sol conzôle

en: Receiving Speed:
target: Roedeu di rçuvaedje:

en: Refresh
target: Rafrister

en: Refresh printer list (to display all available remote CUPS printers)
target: Rafrister li djivêye des scrireces (po-z aveur veyåves totes les scrireces CUPS å lon)

en: Refresh the list
target: Rafrister l' djivêye

en: Refreshing printer data...
target: Rafristant les dnêyes del sicrirece...

en: Refuse
target: Nén accepter

en: Reload partition table
target: Ritcherdjî li tåvlea di pårtixhaedje

en: Remember this password
target: Rimimbrez vs di ci scret chal

en: Remote Administration
target: Administråcion då lon

en: Remote CUPS server
target: Sierveu CUPS å lon

en: Remote Control
target: Contrôle då lon

en: Remote host name
target: No do lodjoe å lon

en: Remote host name missing!
target: Nou no pol lodjoe å lon!

en: Remote lpd Printer Options
target: Tchuzes scrirece lpd å lon

en: Remote printer
target: Sicrirece å lon

en: Remote printer name
target: No del sicrirece å lon

en: Remote printer name missing!
target: Nou no pol sicrirece å lon!

en: Removable media automounting
target: Montaedje otomatike des sopoirts bodjåves

en: Remove
target: Oister

en: Remove List
target: Djivêye a oister

en: Remove Selected
target: Oister les tchoezis

en: Remove Windows
target: Bodjî Windows foû

en: Remove Windows(TM)
target: Bodjî Windows(tm) foû

en: Remove a module
target: Oister on module

en: Remove fonts on your system
target: Oister les fontes foû di vosse sistinme

en: Remove from LVM
target: Bodjî foû do LVM

en: Remove from RAID
target: Bodjî foû do RAID

en: Remove printer
target: Oister ene sicrirece

en: Remove selected host
target: Oister les tchoezis lodjoes

en: Remove selected host/network
target: Oister les tchoezis lodjoes/rantoeles

en: Remove selected server
target: Oister li tchoezi sierveu

en: Remove the last item
target: Oister li dierin cayet

en: Remove the logical volumes first
target: Oister les volumes lodjikes d' aprume

en: Remove the loopback file?
target: Bodjî li fitchî loopback?

en: Remove this printer from Star Office/OpenOffice.org/GIMP
target: Oister cisse sicrirece chal po Star Office/OpenOffice.org/GIMP

en: Remove user directories before restore.
target: Oister les ridants des uzeus dvant di rapexhî.

en: Removing %s
target: Dji oistêye %s

en: Removing %s ...
target: Dji oistêye %s ...

en: Removing old printer "%s"...
target: Dji oistêye li viye scrirece «%s»...

en: Removing printer "%s"...
target: Dji oistêye li scrirece «%s»...

en: Removing printer from Star Office/OpenOffice.org/GIMP
target: Oistaedje d' ene sicrirece po Star Office/OpenOffice.org/GIMP

en: Replay
target: Rifé

en: Report
target: Rapoirt

en: Report check result by mail
target: Emiler l' rapoirt des verifiaedjes

en: Report unowned files
target: Rapoirter les fitchîs ôrfulins

en: Rescue partition table
target: Rapexhî li tåvlea di pårtixhaedje

en: Reselect correct fonts
target: Ritchoezi les fontes corekes

en: Resize
target: Candjî di grandeu

en: Resizing
target: Dji candje li grandeu

en: Resizing Windows partition
target: Dji carcule les limites do sistinme di fitchîs di Windows

en: Resolution
target: Finté

en: Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
target: Finté
    
       Vos ploz tchoezi chal les fintés eyet nombe di coleurs emey les tchuzes
    possibes po voste éndjolreye. Tchoezixhoz çou ki vs convént l' mî (vos
    pôroz candjî çoula pus tård, après l' astalaedje, si vos vloz). Èn egzimpe
    do tchoezi apontiaedje est håyné e l' waitroûle.

en: Resolution: %s
target: Fintés: %s

en: Resolutions
target: Fintés

en: Restart XFS
target: Renonder XFS

en: Restarting CUPS...
target: Dji renonde CUPS...

en: Restarting printing system...
target: Renondant li sistinme d' eprimaedje...

en: Restore
target: Rapexhî

en: Restore Failed...
target: Li rapexhaedje a fwait berwete...

en: Restore From CD
target: Rapexhî a pårti d' ene plake lazer

en: Restore From Catalog
target: Rapexhî a pårti do catalogue

en: Restore From Tape
target: Rapexhî a pårti d' ene binde

en: Restore Other
target: Rapexhî ôte

en: Restore Progress
target: Avançmint do rapexhaedje

en: Restore Selected
target: Rapexhî les
    fitchîs tchoezis

en: Restore Selected
    Catalog Entry
target: Rapexhî l' intrêye
    di catalogue tchoezye

en: Restore Selected
    Files
target: Rapexhî les
    fitchîs tchoezis

en: Restore Users
target: Rapexhî uzeus

en: Restore Via Network
target: Rapexhî å dtruviè del rantoele

en: Restore Via Network Protocol: %s
target: Rapexhî å dtruviè do protocole rantoele: %s

en: Restore all backups
target: Rapexhî totes les copeyes di såvrité

en: Restore from Hard Disk.
target: Rapexhî del deure plake.

en: Restore partition table
target: Rimete li tåvlea di pårtixhaedje come divant

en: Restore system
target: Rapexhî l' sistinme

en: Restoring from file %s failed: %s
target: Åk n' a nén stî come dji sayive di rifé a pårti do fitchî %s: %s

en: Restrict command line options
target: Rastrinde les tchuzes del roye di cmande

en: Right "Windows" key
target: Li tape «Windows» di droete

en: Right Alt key
target: Li tape AltGr

en: Right Control key
target: Li tape Control di droete

en: Right Shift key
target: Li tape Shift di droete

en: Romania
target: Roumaneye

en: Romanian (qwerty)
target: Roumin (QWERTY)

en: Romanian (qwertz)
target: Roumin (QWERTZ)

en: Root
target: Raecene

en: Root partition size in MB:
target: Grandeu del pårticion raecene e Mo:

en: Root password
target: Sicret di root

en: Root umask
target: umask (prémetowès permissions) po root

en: Routers:
target: Routeus:

en: Run "sndconfig" after installation to configure your sound card
target: Enondez «sndconfig» après l' astalåcion po-z apontyî vosse cåte son

en: Run config tool
target: Enonder l' usteye d' apontiaedje

en: Run some checks against the rpm database
target: Enonder sacwants verifiaedjes del båze di dnêyes di rpm

en: Run the daily security checks
target: Enonder les verifiaedjes di såvrité pa msec di tchaeke djoû

en: Running "%s" ...
target: Dj' enonde «%s»...

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
target: Enonde les cmandes metowes avou li cmande at å moumint defini avou li cmande at.
    Sieve eto a enonder des cmandes batch cwand c' est ki l' éndjole n' a nén
    trop d' ovraedje so les bresses.

en: Russia
target: Rûsseye

en: Russian
target: Rûsse

en: Russian (Phonetic)
target: Rûsse (fonetike)

en: SCSI controllers
target: Controleus SCSI

en: SECURITY WARNING!
target: ADVIERTIXHMINT DI SÅVRITÉ!

en: SILO Installation
target: Astalåcion di SILO

en: SMB (Windows 9x/NT) Printer Options
target: Tchuzes scrirece SMB/Windows

en: SMB server IP
target: IP do sierveu SMB

en: SMB server host
target: Lodjoe sierveu SMB

en: SMB/Windows server "%s", share "%s"
target: Sierveu SMB/Windows «%s», pårtaedje «%s»

en: SMBus controllers
target: Controleus SMBus

en: SSH Server
target: Sierveu SSH

en: Saami (norwegian)
target: Saami (norvedjyinne)

en: Saami (swedish/finnish)
target: Sami (suwedwesse/finlandesse)

en: Sagem (using dhcp) usb
target: Sagem usb (eployant dhcp)

en: Sagem (using pppoa) usb
target: Sagem usb (eployant pppoa)

en: Saint Helena
target: Sinte Helene

en: Saint Kitts and Nevis
target: Sint Kitts eyet Nevis

en: Saint Lucia
target: Sinte Luciye

en: Saint Pierre and Miquelon
target: Sint Pierre et Miquelon

en: Saint Vincent and the Grenadines
target: Sint Vincint eyet les Grenadines

en: Samba Server
target: Sierveu Samba

en: Samba share name missing!
target: Nou no di pårtaedje samba!

en: Samoa
target: Samowa

en: San Marino
target: Sint Marin

en: Sao Tome and Principe
target: São Tomé et Prince

en: Saturday
target: Semdi

en: Saudi Arabia
target: Arabeye Sawoudite

en: Save
target: Schaper

en: Save as..
target: Schaper eyet rlomer...

en: Save on floppy
target: Schaper e ene plakete

en: Save packages selection
target: Schaper li tchuze des pacaedjes

en: Save partition table
target: Schaper li tåvlea di pårtixhaedje

en: Save theme
target: Schaper l' tinme

en: Saves and restores system entropy pool for higher quality random
    number generation.
target: Schaper et rprinde l' éntropeye do sistinme, po-z aveur ene askepiance
    di nombes a l' astcheyance di meyeuse cwålité.

en: Scanner
target: Sicanrece

en: Scanner sharing
target: Pårtaedje des scanreces

en: Scanner sharing to hosts:
target: Pårtaedje di scanreces po les lodjoes:

en: Scannerdrake will not be started now.
target: Scannerdrake èn serè nén enondé asteure.

en: Scanning for TV channels
target: Cweraedje des canås TV

en: Scanning for TV channels in progress ...
target: Li cweraedje des canås TV est en alaedje ...

en: Scanning network...
target: Dj' analijhe li rantoele...

en: Scanning on your HP multi-function device
target: Sicanaedje so l' éndjin multi-fonccions HP

en: Scanning partitions to find mount points
target: Dji louke ezès pårticions po trover les ponts di montaedje

en: Scientific Workstation
target: Posse éndjolrece syintifike

en: Scientific applications such as gnuplot
target: Programes syintifikes come gnuplot

en: Screenshots will be available after install in %s
target: Les waitroûlêyes seront metowes el ridant %s après l' astalaedje

en: Script-based
target: Pa scripe

en: Search for files to restore
target: Cweri après des fitchîs a rapexhî

en: Search for fonts in installed list
target: Cweri el djivêye des fontes astalêyes

en: Search for new scanners
target: Dji cwir après des nouvès scanreces

en: Search installed fonts
target: Cweri les fontes astalêyes

en: Search new servers
target: Cweri des noveas sierveus

en: Search servers
target: Dji cwir les sierveus

en: Search:
target: Cweri:

en: Searching for configured scanners ...
target: Dji cwir après des scanreces d' apontieyes...

en: Searching for new printers...
target: Dji cwir après des nouvès scrireces...

en: Searching for new scanners ...
target: Dji cwir après des nouvès scanreces...

en: Searching for scanners ...
target: Dji cwir après des scanreces...

en: Second DNS Server (optional)
target: Deujhinme sierveu DNS (opcionel)

en: Second floppy drive
target: deujhinme léjheu di plaketes

en: Sector
target: Secteu

en: Secure your networks with the Multi Network Firewall
target: Metoz vos rantoeles e såvrité avou li  «Multi Network Firewall» (côpe feu multi-rantoeles)

en: Security
target: Såvrité

en: Security Administrator (login or email)
target: Manaedjeu pol såvrité (no d' elodjaedje ou emile)

en: Security Administrator:
target: Manaedjeu pol såvrité:

en: Security Alerts:
target: Abranles di såvrité:

en: Security Level
target: Livea di såvrité

en: Security Level:
target: Livea di såvrité:

en: Security level
target: Livea di såvrité

en: See hardware info
target: Veyoz les informåcions sol éndjolreye

en: Select Printer Connection
target: Tchoezixhoz li raloyaedje del sicrirece

en: Select Printer Spooler
target: Tchoezixhoz li caweye di scrirece

en: Select a device !
target: Tchoezixhoz èn éndjin!

en: Select a scanner model
target: Tchoezixhoz ene sôre di scanrece

en: Select file
target: Tchoezi fitchî

en: Select installation class
target: Li classe d' astalåcion

en: Select model manually
target: Tchoezi li modele al mwin

en: Select the files or directories and click on 'OK'
target: Tchoezixhoz les fitchîs et les ridants et s' clitchîz so «'l est bon»

en: Select the font file or directory and click on 'Add'
target: Tchoezixhoz li fitchî d' fonte ou l' ridant a radjouter, et clitchîz so «Radjouter»

en: Select the memory size of your graphics card
target: Dijhoz li memwere di vosse cåte grafike

en: Select user manually
target: li ridant d' èn uzeu tchoezi

en: Select your provider.
    If it isn't listed, choose Unlisted.
target: Tchoezixhoz vosse ahesseu.
     S' i n' si trove nén el djivêye, tchoezixhoz «Unlisted»

en: Selected All
target: Tchoezi tot

en: Selected size is larger than available space
target: Li grandeu tchoezeye est pus grande kel plaece ki dmeure

en: Send mail report after each backup to:
target: Après tchaeke copeye di såvrité emiler on rapoirt a:

en: Sending Speed:
target: Roedeu d' evoyaejde:

en: Sending files by FTP
target: Dj' evoye les fitchîs avou FTP

en: Sending files...
target: Dj' evoye les fitchîs...

en: Senegal
target: Sénégal

en: September
target: Setimbe

en: Serbia
target: Serbeye

en: Serbian (cyrillic)
target: Serbe (cirilike)

en: Server
target: Sierveu

en: Server IP missing!
target: Nole adresse IP pol sierveu!

en: Server Name
target: No do sierveu

en: Server:
target: Sierveu:

en: Services
target: Siervices

en: Services and deamons
target: Siervices et démons

en: Services: %d activated for %d registered
target: Siervices: %d en alaedje po %d eredjistrés

en: Set as default
target: Mete come prémetou

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
target: Esshonna d' usteyes po lére et evoyî des messaedjes (pine, mutt, tin...) et po naivyî so les pådjes waibe

en: Set of tools to read and send mail and news and to browse the Web
target: Eshonna d' usteyes po lére et evoyî des messaedjes et po naivyî so les pådjes waibe

en: Set root password
target: Sicret di root

en: Set root password and network authentication methods
target: Defini li scret di root eyet les metôdes d' otintifiaedje pa rantoele

en: Set selected printer as the default printer
target: Mete cisse sicrirece come prémetowe sicrirece

en: Set shell commands history size. A value of -1 means unlimited.
target: Defini li grandeu po l' istwere des cmandes do shell. Ene valixhance di -1 vout dire sins limite.

en: Set the password minimum length and minimum number of digit and minimum number of capitalized letters.
target: Defini li longueu minimom des screts, li nombe minimom di chifes eyet l' nombe minimom di grandès letes.

en: Set the root umask.
target: Defini l' umask (prémetowès permissions) po root

en: Set the user umask.
target: Defini l' umask (prémetowès permissions) po l' uzeu

en: Set this printer as the default
target: Mete cisse sicrirece come prémetowe sicrirece

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
target: Apontyî vosse sierveu Windows po kel sicrirece soeye disponibe dizo l' protocole IPP eyet apontyî l' eprimaedje a pårti di ciste éndjole chal avou l' sôre di raloyaedje «%s» dins Printerdrake.

en: Setting Default Printer...
target: Definixhant li prémetowe sicrirece...

en: Settings
target: Apontiaedjes

en: Seychelles
target: Secheles

en: Share name
target: No del pårteye

en: Sharing of local printers
target: Pårtaedjaedje di sicrireces locåles

en: Sharing of local scanners
target: Pårtaedjaedje des scanreces locåles

en: Shell history size
target: Grandeu del istwere del roye di cmande

en: Shell timeout
target: Tårdjaedje do shell

en: Show automatically selected packages
target: Mostrer les pacaedjes tchoezis otomaticmint

en: Show current interface configuration
target: Mostrer l' apontiaedje del eterface do moumint

en: Show only for the selected day
target: Mostrer seulmint pol djoû tchoezi

en: Singapore
target: Singapour

en: Size
target: Grandeu

en: Size in MB:
target: Grandeu e Mo:

en: Size:
target: Grandeu:

en: Size: %s
target: Grandeu: %s

en: Size: %s
target: Grandeu: %s

en: Skip
target: Passer houte

en: Slovakia
target: Eslovakeye

en: Slovakian (QWERTY)
target: Slovake (QWERTY)

en: Slovakian (QWERTZ)
target: Slovake (QWERTZ)

en: Slovenia
target: Esloveneye

en: Slovenian
target: Slovenyinne

en: Software Manager
target: Manaedjeu di programes

en: Solomon Islands
target: Iyes Solomon

en: Somalia
target: Somaleye

en: Some devices in the "%s" hardware class were removed:
target: Sacwants éndjins del classe d' éndjolreye «%s» ont stî bodjîs:

en: Some devices were added:
target: Sacwants éndjins ont stî radjoutés:

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
target: Vos avoz del éndjolreye k' a mezåjhe di mineus «proprietaire» po roter
    Vos trovroz del informåcion so zels so: %s

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
target: Sacwants consecants pacaedjes n' ont nén stî astalés comufåt.
    Motoit vosse léjheu di plakes lazer, oudonbén vosse plake lazer, ont
    des rujhes.
    Verifyîz vosse plake lazer sor ene copiutrece ddja astalêye, avou
    l' comande «rpm -qpl Mandrake/RPMS/*.rpm»

en: Some of the early i486DX-100 chips cannot reliably return to operating mode after the "halt" instruction is used
target: Sacwantes des prumirès tchikes i486DX-100 èn polént nén ritourner comufåt å môde d' ovraedje après aveur riçuvou l' instruccion «halt»

en: Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path.
target: Des protocoles k' i gn a, come rsync, polèt esse apontyîs sol costé do sierveu. Purade ki d' eployî li tchmin d' on ridant, vos ploz eployî l' no do «module» do siervice come tchimin.

en: Some steps are not completed.
    
    Do you really want to quit now?
target: Sacwantès etapes n' ont nén stî fwaites,
    
    Voloz vs vormint cwiter asteure?

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random, corrupted data.
target: Ene sacwè di mwais arive a vosse deure plake. 
    Åk n' a nén stî tot sayant di verifyî l' etegrité des dnêyes. 
    Çoula vout dire ki tot çki vos alez scrire el plake va fini come 
    des crombès sacwès a l' astcheyance.

en: Something went wrong! - Is mkisofs installed?
target: Åk n' a nén stî comufåt! - Est çki mkisofs est astalé?

en: Sorry, no floppy drive available
target: Dji rgrete, i gn a nou léjheu di plaketes

en: Sorry, we support only 2.4 kernels.
target: Mande escuzes, mins nos n' sopoirtans k' les naweas 2.4.

en: Sound and video playing/editing programs
target: Programes po vey/schoûter/candjî des sons et videyos

en: Sound card
target: Cåte son

en: Sound configuration
target: Apontiaedje do son

en: Soundcard
target: Cåte son

en: South Africa
target: Nonne Afrike

en: Spain
target: Espagne

en: Spanish
target: Espagnole

en: Specify options
target: Dijhoz les tchuzes

en: Splash selection
target: Tchoezixhaedje del waitroûle d' enondaedje

en: Standalone Tools
target: Mierseulès usteyes

en: Standard
target: Tipike

en: Standard test page
target: Pådje di saye standård

en: Start
target: Enonder

en: Start Server
target: Enonder l' sierveu

en: Start at boot
target: En alaedje a l' enondaedje

en: Start sector:
target: Secteu di cminçmint:

en: Start: sector %s
target: Enondaedje: secteu %s

en: Started on boot
target: En alaedje a l' enondaedje

en: Starting network...
target: Dj' enonde li rantoele...

en: Starting the printing system at boot time
target: Enonder li sistinme d' eprimaedje a l' enondaedje del éndjole

en: Starts the X Font Server (this is mandatory for XFree to run).
target: Enonder li sierveu d' fontes å moumint di l' enondaedje
    (çoula est obligatwere si vos vloz eployî XFree).

en: State
target: Sitatut

en: Statistics
target: Sitatistikes

en: Status:
target: Sitatut:

en: Stop
target: Arester

en: Stop Server
target: Djoker l' sierveu

en: Store the password for this system in drakbackup configuration.
target: Wårder li scret po ci sistinme chal e fitchî d' apontiaedje di drakbackup.

en: Submit cpuinfo
target: Evoyî l' info sol CPU

en: Submit kernel version
target: Evoyî l' modêye do nawea

en: Submit lspci
target: Evoyî l' rexhowe di lspci

en: Subnet Mask:
target: Maske di sub-rantoele:

en: Subnet:
target: Sub-rantoele:

en: Sudan
target: Soudan

en: Summary
target: Rascourti éndjolreye

en: Summary:
target: Rascourti:

en: Sun - Mouse
target: Sori SUN

en: Sunday
target: Dimegne

en: Support the OKI 4w and compatible winprinters.
target: Sopoirt po les scrireces OKI 4w et copatibes.

en: Suppress Fonts Files
target: Bodjî les fitchîs di fontes

en: Suppress Temporary Files
target: Bodjî les fitchîs timporaires

en: Surf the Web with Mozilla or Konqueror, read your mail with Evolution or Kmail, create your documents with OpenOffice.org.
target: Naivyîz so les waibes avou Mozilla ou Konqueror, léjhoz vos emiles avou Evolution ou Kmail, fijhoz vos papîscrits avou OpenOffice.org.

en: Svalbard and Jan Mayen Islands
target: Iyes Svalbard eyet Jan Mayen

en: Swap partition size in MB:
target: Grandeu del pårticion di swap e Mo:

en: Sweden
target: Suwede

en: Swedish
target: Suwedwesse

en: Swiss (French layout)
target: Swisse (cogne romande)

en: Swiss (German layout)
target: Swisse (cogne tîxhone)

en: Switching from ext2 to ext3
target: Discandjî di ext2 a ext3

en: Switzerland
target: Swisse

en: Synchronization tool
target: Usteye di sincronijhaedje

en: Syria
target: Sireye

en: Syriac
target: Siriake

en: Syriac (phonetic)
target: Siriake (fonetike)

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
target: Syslog est ene usteye ki schoûte les diferins démons ki lyi evoyèt
    des messaedjes po mete dvins les fitchîs djournå do sistinme.
    C' est ene bone idêye di l' aveur todi en alaedje.

en: Syslog reports to console 12
target: Evoyî les messaedjes do djournå sistinme (syslog) sol conzôle 12

en: System
target: Sistinme

en: System Options
target: Tchuzes pol sistinme

en: System configuration
target: Apontiaedje do sistinme

en: System installation
target: Astalaedje do sistinme

en: System mode
target: Môde do sistinme

en: System settings
target: Apontiaedjes do sistinme

en: TB
target: To

en: TCP/IP host "%s", port %s
target: Lodjoe TCP/IP «%s», pôrt %s

en: TCP/Socket Printer Options
target: Tchuzes scrirece rantoele TCP/soket

en: TV card
target: Cåte tévé

en: TV norm:
target: Nôrme TV:

en: Table
target: Tåvlea

en: Tajik keyboard
target: Tadjike

en: Tajikistan
target: Tadjikistan

en: Tamil (ISCII-layout)
target: Tamoule (adjinçmint ISCII)

en: Tamil (Typewriter-layout)
target: Tamoule (adjinçmint «taprece mecanike»)

en: Tanzania
target: Tanzaneye

en: Tape
target: Binde

en: Telugu
target: Telougou

en: Terminal-based
target: Pa terminå

en: Test
target: Saye

en: Test of the configuration
target: Saye di l' apontiaedje

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
target: Li ou les pådjes di saye ont stî evoyeyes al sicrirece.
    Ça pout prinde ene pitite hapêye divant ki li scrirece s' enonde.

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
target: Li ou les pådjes di saye ont stî evoyeyes al sicrirece.
    Ça pout prinde ene pitite hapêye divant ki li scrirece s' enonde.
    Avançmint:
    %s

en: Test pages
target: Rexhe les pådjes di saye

en: Testing your connection...
target: Dji saye vosse raloyaedje...

en: Thai keyboard
target: Tailandesse

en: Thailand
target: Taylande

en: Thank you for choosing Mandrake Linux 9.2
target: Gråces di tchoezi Mandrake Linux 9.2

en: The %s is not known by this version of Scannerdrake.
target: Li %s n' est nén cnoxhou pa cisse modêye chal di scannerdrake.

en: The %s is not supported by this version of Mandrake Linux.
target: Li %s n' est nén sopoirté pa cisse modêye chal di Mandrake Linux.

en: The %s is unsupported
target: Li %s n' est nén sopoirtêye

en: The %s must be configured by printerdrake.
    You can launch printerdrake from the Mandrake Control Center in Hardware section.
target: Li %s doet esse apontieye pa printerdrake.
    Vos ploz enonder printerdrake a pårti do cinte di contrôle di Mandrake, el seccion «Éndjolreye».

en: The DHCP end ip
target: Fin del fôrtchete d' adresses pol DHCP

en: The DHCP end range
target: Fén del fôrtchete pol DHCP

en: The DHCP server will allow other computer to boot using PXE in the given range of address.
    
    The network address is %s using a netmask of %s.
target: Li sierveu DHCP permetrè a d' ôtès copiutreces di s' enonder tot-z ployant PXE dins l' fortchete d' adresses dinêye.
    
    L' adresse del rantoele est %s avou on maske rantoele di %s.

en: The DHCP start ip
target: Comince del fôrtchete d' adresses pol DHCP

en: The DHCP start range
target: Comince del fôrtchete pol DHCP

en: The DNS Server IP
target: IP do sierveu DNS

en: The DrakX Partitioning wizard found the following solutions:
target: Li Macrea di Pårtixhaedje di DrakX a trové les solucions shuvantes:

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
target: Li candjmint di grandeu di vosse pårticion FAT n' a nén stî, 
    a cåze del aroke shuvante: %s

en: The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.
target: Li HP LaserJet 1000, a mezåjhe di rçure si firmware djusse après aveur stî metowe en alaedje. Aberwetez li mineu a pårti del waibe da HP (li firmware do CD di mineus Windows del sicrirece ni sieve nén) eyet saetchîz l' fitchî do firmware foû del årtchive «*.exe» avou l' programe «unzip» et cweroz après l' fitchî «sihp10000.img». copyîz ç' fitchî la dins l' ridant «/etc/printer». La i srè trové otomaticmint eyet evoyî al sicrirece tchaeke côp k' ele est metowe en alaedje.

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
target: L' evironmint di scribanne KDE, l' evironmint grafike di båze, avou ene coleccion d' usteyes ki vnèt avou

en: The Local Network did not finish with `.0', bailing out.
target: Li limero del rantoele locåle ni finixh nén pa «.0», dj' abandone.

en: The Mandrake Linux installation is distributed on several CD-ROMs. DrakX
    knows if a selected package is located on another CD-ROM so it will eject
    the current CD and ask you to insert the correct CD as required.
target: L' astalaedje del distribucion Mandrake Linux a si télmint di pacaedjes
    k' il a bén falou les mete so sacwantes plakes lazer. DrakX sait si on
    pacaedje k' a stî tchoezi est so ene ôte plake lazer, et i drovrè
    l' léjheu di plakes lazer po vos l' candjî et mete li çou k' i fåt.

en: The URL must begin with http:// or https://
target: Li hårdêye doet cmincî avou «http://» ou «https://»

en: The argument specifies if clients are authorized to connect
    to the X server from the network on the tcp port 6000 or not.
target: L' årgumint definixh si les cliyints sont otorijhîs ou nén
    a s' raloyî å sierveu X åd truviè del rantoele sol pôrt 6000.

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
target: L' astalaedje pout esse totafwait otomatike si vos vloz,
    dins ci cas i va abwesner totafwait li deure plake!!
    (dj' ô bén c' est po-z astaler sor ene nouve éndjole).
    
    Motoit ki vos vloz rifé l' astalåcion.

en: The backup partition table has not the same size
    Still continue?
target: Li copeye di såvrité del tåvlea di pårtixhaedje n' a nén li minme grandeu.
    Doe dju continuwer tot l' minme?

en: The change is done, but to be effective you must logout
target: Li candjmint a stî fwait, mins i vs fåt dislodjî et rvini e session po k' i prindaxhe efet

en: The change is done, do you want to restart the dm service ?
target: Li candjmint a stî fwait, voloz renonder li siervice manaedjeu di håynaedje?

en: The classic bug sound tester is to run the following commands:
    
    
    - "lspcidrake -v | fgrep AUDIO" will tell you which driver your card uses
    by default
    
    - "grep sound-slot /etc/modules.conf" will tell you what driver it
    currently uses
    
    - "/sbin/lsmod" will enable you to check if its module (driver) is
    loaded or not
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" will
    tell you if sound and alsa services're configured to be run on
    initlevel 3
    
    - "aumix -q" will tell you if the sound volume is muted or not
    
    - "/sbin/fuser -v /dev/dsp" will tell which program uses the sound card.
target: Li saye classike po vey s' i gn a des problinmes avou l' son, c' est d' enonder les cmandes ki shuvèt:
    
    
    - « lspcidrake -v | fgrep AUDIO » ki vs dirè li ké prémetou mineu ki vosse cåte son eploye
    
    - « grep sound-slot /etc/modules.conf » ki vs dirè li mineu k' ele eploye pol moumint
    
    - « /sbin/lsmod » ki vs permete di verifyî si l' module do mineu del cåte son est tcherdjî ou nén
    
    - « /sbin/chkconfig --list sound » eyet « /sbin/chkconfig --list alsa » ki vs diront si les siervices do son et do sistinme di son ALSA sont-st apontyîs po-z esse enondés dins l' livea d' enondaedje 3
    
    - « aumix -q » ki vs dirè si l' volume do son est dismetou ou nén
    
    - « /sbin/fuser -v /dev/dsp » ki vs dirè li ké programe k' eploye li cåte son.

en: The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: L' apontiaedje del sicrirece srè fwait totafwaitmint otomaticmint. Si vosse sicrirece n' a nén stî detectêye comufåt, ou si vos inmez mî on apontiaedje diferin, metoz en alaedje «Apontiaedje manwuel».

en: The creation of the boot floppy has been successfully completed
target: L' askepiaedje del plakete d' enondaedje a stî comifåt

en: The current security level is %s
    Select permissions to see/edit
target: Li livea di såvrité pol moumint est %s
    Tchoezixhoz les permissions a vey/candjî

en: The default lease (in seconds)
target: Li prémetou tins di wårdaedje (e segondes) des adresses DHCP

en: The encryption keys do not match
target: Les clés d' ecriptaedje ni sont nén les minmes

en: The entered IP is not correct.
target: L' adresse IP dnêye n' est nén coreke.

en: The entered host/network IP is not correct.
target: L' adresse IP dnêye pol lodjoe/rantoele n' est nén coreke.

en: The floppy has been successfully generated.
    You may now replay your installation.
target: Li plakete a stî fwaite comufåt.
    Vos ploz asteure rifé on astalaedje avou.

en: The following options can be set to customize your
    system security. If you need an explanation, look at the help tooltip.
target: Les tchuzes ki shuvèt polèt esse defineyes po-z apontyî a vosse môde
    li livea di såvrité. Si vos avoz dandjî d' esplikêyes, clitchîz so «Aidance».

en: The following packages are going to be installed
target: Les pacaedjes ki shuvèt vont esse astalés

en: The following packages are going to be removed
target: Les pacaedjes ki shuvèt vont esse disastalés

en: The following packages need to be installed:
target: Les pacaedjes ki shuvèt dvèt esse astalés:

en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
target: Les pacaedjes shuvants vont esse oistés, po pleur mete a djoû vosse sistinme:
     %s
    
    Voloz vs vormint oister ces pacaedjes la?

en: The following printer
    
    %s%s
    are directly connected to your system
target: Les scrireces shuvantes
    
    %s%s
    sont raloyeyes direk so voste éndjole

en: The following printer
    
    %s%s
    is directly connected to your system
target: Li scrirece shuvante
    
    %s%s
    est raloyeye direk so voste éndjole

en: The following printer was auto-detected.
target: Li scrirece ki shût a stî detectêye otomaticmint.

en: The following printers
    
    %s%s
    are directly connected to your system
target: Les scrireces shuvantes
    
    %s%s
    sont raloyeyes direk so voste éndjole

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
target: Les scrireces shuvantes sont-st apontieyes. Dobe-clitchîz so ene di zeles pol candjî, pol mete come prémetowe sicrirece, ou po-z aveur des informåcions dso.

en: The following scanner
    
    %s
    is available on your system.
target: Li scanrece shuvante
    
    %s
    est disponibe so voste éndjole.

en: The following scanners
    
    %s
    are available on your system.
target: Les scanreces shuvantes
    
    %s
    sont disponibes so voste éndjole.

en: The highlighted entry will be booted automatically in %d seconds.
target: L' intreye e sorbriyance va esse enondeye otomaticmint dins %d s.

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
target: Les mineus po les scrireces a djet d' intche k' ont stî dné pa Lexmark sopoirtèt seulmint les scrireces locåles, nén les scrireces å lon ou so des sierveus d' eprimaedje. I vos fåt l' mete so on pôrt locå oudonbén l' apontyî sol éndjole wice k' ele est raloyeye.

en: The internal domain name
target: Li no d' dominne eployî divintrinnmint

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
target: Li démon Internet (inetd) est on «super-sierveu» k' enonde ene drigleye
    d' ôtes siervices k' ont a vey avou Internet cwand c' est k' i gn a mezåjhe.
    Metans: telnet, ftp, rsh eyet rlogin.  Si vos n' purdoz nén inetd, nouk di ces
    siervices la ni såreut esse enondé.

en: The maximum lease (in seconds)
target: Li tins macsimom di wårdaedje (e segondes) des adresses DHCP

en: The model is correct
target: Li modele est corek

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few use dhcp.
    If you don't know, choose 'use pppoe'
target: Li voye li pus simpe di s' adjonde avou l' ADSL, c' est pppoe.
    Mins nerén, gn a des ôtes raloyaedjes ki s' siervèt fok di pptp ou dhcp.
    Si vos n' e savoz rén, tchoezixhoz «eployî pppoe».

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
target: Li rantoele n' esteut nén en alaedje, et dj' a nén polou l' enonder. Verifyîz vost apontiaedje et voste éndjolreye. Et poy sayîz cor on côp d' apontyî vosse sicrirece å lon.

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
target: L' apontiaedje del rantoele k' a stî fwait tins di l' astalaedje ni pout nén esse enondé asteure. Acertinez vs kel rantoele divént accessibe djusse après l' enondaedje, eyet coridjîz l' apontiaedje avou li cinte di contrôle di Mandrake, al seccion «Rantoele & Daegntoele»/«Raloyaedje», et après apontyîz li scrirece, todi avou l' cinte di contrôle di Mandrake, al seccion «Éndjolreye»/«Sicrirece».

en: The network needs to be restarted. Do you want to restart it ?
target: I gn a mezåjhe di renonder li rantoele. El voloz vs fé?

en: The official MandrakeSoft Store
target: Li waibe oficir di comiece so fyis di MandrakeSoft

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver'll only be used on next bootstrap.
target: Li vî mineu «%s» a stî metou dins ene boere djivêye.
    
    I gn a-st avou sacwants rapoirts dijhant k' i fjheut des problinmes
    avou l' nawea (des «oops») å moumint del distcherdjî.
    
    Li novea mineu «%s» srè eployî seulmint a pårti do renondaedje ki vént.

en: The package %s is needed. Install it?
target: I gn a mezåjhe do pacaedje «%s». El voloz astaler?

en: The package %s needs to be installed. Do you want to install it?
target: I gn a mezåjhe d' astaler li pacaedje «%s». El voloz astaler?

en: The passwords do not match
target: Les mots di passe sont nén les minmes

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
target: Li pårtaedje pa uzeu eploye li groupe «fileshare».
    Vos ploz radjouter on uzeu dins ç' groupe la avou userdrake.

en: The port number should be an integer!
target: Li pôrt doet esse on limero etir!

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
target: Li mapeu d' pôrts manaedje les raloyaedjes RPC, ki sont-st eployîs pa
    des protocoles come NFS ou NIS. Li sierveu portmap doet esse en alaedje
    so les éndjoles ki dvèt esse des sierveus po des protocoles ki s' e siervèt do RPC.

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
target: Li scrirece «%s» egzistêye dedja,
    voloz vs vormint spotchî si apontiaedje?

en: The printer "%s" is set as the default printer now.
target: Li scrirece «%s» a stî metowe come prémetowe sicrirece.

en: The printer "%s" was successfully added to Star Office/OpenOffice.org/GIMP.
target: Li scrirece «%s» a stî radjoutêye po Star Office/OpenOffice.org/GIMP.

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org/GIMP.
target: Li scrirece «%s» a stî bodjeye po Star Office/OpenOffice.org/GIMP.

en: The printers on this machine are available to other computers
target: Les scrireces so ciste éndjole chal sont disponibes po d' ôtès copiutreces

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
target: Li sistinme d' eprimaedje (%s) ni srè nén enonder otomaticmint cwand l' éndjole s' enondrè.
    
    C' est possibe ki l' enondaedje otomatike fuxhe essocté paski l' livea di såvrité a stî ragrandi, ca l' sistinme d' eprimaedje est on pont possibe d' atakes po les hacneus.
    
    Voloz vs rimete en alaedje l' enondaedje otomatike do sistinme d' eprimaedje?

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
target: Li démon routed c' est po-z aveur li tåvlea di routaedje IP esse metou a djoû
    otomaticmint viè l' protocole RIP. Li protocole RIP est bråmint eployî avou
    les ptitès rantoeles, mins des pus complesses rantoeles ont mezåjhe di pus complesses protocoles.

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
target: Li protocole rstat c' est po les uzeus k' i gn a sor ene rantoele poleur
    vey des informåcions sol performance d' ene éndjole del rantoele.

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
target: Li protocole rusers c' est po les uzeus k' i gn a sor ene rantoele poleur
    idintifyî kî est raloyî so des ôtès éndjoles.

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
target: Li protocole rwho c' est po des lodjoes å lon poleur vey ene djivêye
    di tos les uzeus ki sont raloyîs sol éndjole, si l' démon rwho est
    astalé eyet en alaedje (çoula ravize a finger).

en: The scanners on this machine are available to other computers
target: Les scanreces so ciste éndjole chal sont disponibes po d' ôtès copiutreces

en: The setup has already been done, and it's currently enabled.
target: L' apontiaedje a ddja stî fwait. Et il est en alaedje pol moumint.

en: The setup has already been done, but it's currently disabled.
target: L' apontiaedje a ddja stî fwait. Mins il est pol moumint dismetou.

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
target: L' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece a ddja stî fwait.
    Il est en alaedje pol moumint.
    
    Cwè voloz vs fé?

en: The setup of Internet connection sharing has already been done.
    It's currently disabled.
    
    What would you like to do?
target: L' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece a ddja stî fwait.
    Il est pol moumint dismetou.
    
    Cwè voloz vs fé?

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community.
target: Li succès di MandrakeSoft est costrût sol principe des libes programes. Vosse novea sistinme d' operance est li rzultat d' on ovraedje e cmon del pårt del daegnrece cominålté Linux

en: The system doesn't seem to be connected to the Internet.
    Try to reconfigure your connection.
target: Li sistinme ni shonne nén esse raloyî al rantoele daegnrece.
    Sayîz di rapontyî li raloyaedje.

en: The system is now connected to the Internet.
target: Li sistinme est raloyî al rantoele daegnrece.

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
target: Les deus pus consecantès sacwès, c' est (1) li frécwénce di 
    rafristaedje d' astampé (vertical refresh rate) eyet, co pus impôrtant,
    li frécwénce di rafristaedje di coûtchî (horizontal refresh rate).
    
    Ni tchoezixhoz MÅY ene frécwénce pus foite ki çki vosse waitroûle sopoite,
    sins cwè vos pôrîz distrure vosse waitroûle.

en: The user name is too long
target: Li no d' uzeu est pår trop long

en: The user name must contain only lower cased letters, numbers, `-' and `_'
target: Li no d' uzeu ni pout aveur ki des ptitès letes, des limeros, «-» ou «_»

en: Theme installation failed!
target: L' astalaedje do tinme a fwait berwete!

en: Theme name
target: No do tinme

en: Themes
target: Tinmes

en: There are already some restrictions, and more automatic checks are run every night.
target: I gn a ddja des rastrindaedjes, et d' ôtes verifiaedjes otomatikes del såvrité sont-st fwaits par nute.

en: There are no printers found which are directly connected to your machine
target: Nole sicrirece a stî trovêye di raloyeye direk so voste éndjole

en: There are no scanners found which are available on your system.
target: Nole sicanrece a stî trovêye di disponibe so voste éndjole.

en: There is already a partition with mount point %s
target: I gn a ddja ene pårticion avou li pont di montaedje %s

en: There is no FAT partition to resize (or not enough space left)
target: I gn a pont di pårticions FAT po candjî leu grandeu  (oudonbén i n' resse nén del plaece assez)

en: There is no FAT partition to use as loopback (or not enough space left)
target: I gn a pont di pårticions FAT po-z eployî pol loopback (oudonbén i n' resse nén del plaece assez)

en: There is no existing partition to use
target: I gn a nén des pårticions po-z eployî

en: There is no medium or it is write-protected for device %s.
    Please insert one.
target: I gn a nou sopoirt oudonbén il est nén scrijhåve el léjheu %s.
    Sititchîz onk s' i vs plait.

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
target: I gn a seulmint ene cåte rantoele d' apontieye so vosse sistinme:
    
    %s
    
    Dji va-z apontyî vosse rantoele locåle avou cisse cåte la.

en: There was an error installing packages:
target: Åk n' a nén stî come dj' astaléve les pacaedjes:

en: There was an error ordering packages:
target: Åk n' a nén stî come dj' arindjive les pacaedjes:

en: There was an error while scanning for TV channels
target: Åk n' a nén stî come dji cwereu les canås TV:

en: There you are. Installation is now complete and your GNU/Linux system is
    ready to use. Just click "%s" to reboot the system. The first thing you
    should see after your computer has finished doing its hardware tests is the
    bootloader menu, giving you the choice of which operating system to start.
    
    The "%s" button shows two more buttons to:
    
     * "%s": to create an installation floppy disk that will automatically
    perform a whole installation without the help of an operator, similar to
    the installation you just configured.
    
       Note that two different options are available after clicking the button:
    
        * "%s". This is a partially automated installation. The partitioning
    step is the only interactive procedure.
    
        * "%s". Fully automated installation: the hard disk is completely
    rewritten, all data is lost.
    
       This feature is very handy when installing a number of similar machines.
    See the Auto install section on our web site for more information.
    
     * "%s"(*): saves a list of the packages selected in this installation.
    To use this selection with another installation, insert the floppy and
    start the installation. At the prompt, press the [F1] key and type >>linux
    defcfg="floppy" <<.
    
    (*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
    "mformat a:")
target: Vo nos la. L' astalåcion a stî fineye et asteure vosse sistinme GNU/Linux
    est presse a-z esse eployî. Vos n' avoz k' a clitchî sol boton «%s»
    po renonder l' éndjole. Li prumire sacwè ki vos voeroz on côp l' éndjole
    renondêye, djusse après li verifiaedje di l' éndjolreye, c' est li menu
    di l' enondrece, ki vs dene li tchuze di ké sistinme d' operance enonder.
    
    Li boton «%s» mostere deus ôtes botons:
    
     * «%s»: po fé ene plakete ki vs
    permetrè di fé ene ôte astalåcion pareye al cene ki vos vnoz d' fé,
    mins di manire otomatike, sins mezåjhe d' ene djin po fé les tchuzes.
    
      Notez k' i gn a co deus ôtes tchuzes on côp ki vos avoz clitchî ç' boton la:
    
        * «%s». Po ene astalåcion dimey-otomatike, l' etape do pårtixhaedje
    (et seulmint cisse etape la) dimorant eteractive;
    
        * «%s». Astalåcion ttafwaitmint otomatike: li deure plake est
    completmint riscrîte et rpårteye, totes les dnêyes k' i gn aveut sront
    pierdowes.
    
       Cisse fonccionålité la est foirt ahessåve po-z astaler so on grand nombe
    d' éndjoles similaires. Loukîz eto li seccion so l' Oto-astalaedje sol
    waibe da nosse.
    
     * «%s»(*): schapêye li tchuze des pacaedjes
    k' a stî fwaite tins di l' astalaedje. Adonpu, cwand vos froz ene nouve
    astalåcion, metoz l' plakete dins l' léjheu et-z enonder l' astalaedje
    tot-z alant sol waitroûle d' aidance (tchoûkîz sol tape [F1]), et s' taper
    « linux defcfg="floppy" » sol roye d' intrêye.
    
    (*) I vs fåt ene plakete FAT-abwesnêye (po ndè fé ene a pårti di GNU/Linux,
    tapez « mformat a: » sol roye di comande).

en: There's no free driver for your sound card (%s), but there's a proprietary driver at "%s".
target: I gn a nou mineu libe po vosse cåte son (%s), mins i gn a-st on mineu prôpietaire so «%s».

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
target: I gn a nou mineu OSS/ALSA alternatif di cnoxhou po vosse cåte son (%s) ki pol moumint eploye «%s»

en: There's no known driver for your sound card (%s)
target: I gn a nou mineu di cnoxhou po vosse cåte son (%s)

en: These are the machines and networks on which the locally connected printer(s) should be available:
target: Çouchal c' est les éndjoles eyet rantoeles ki li/les scrirece(s) locåle(s) î est/sont disponibe(s):

en: These are the machines from which the scanners should be used:
target: Çouchal c' est les éndjoles ki les scanreces sont dzeur:

en: These are the machines on which the locally connected scanner(s) should be available:
target: Çouchal c' est les éndjoleseyet rantoeles ki li/les scrirece(s) locåle(s) î est/sont disponibe(s):

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
target: Vos ploz ossu eployî ces comandes la pol tchamp «Comande po rexhe» k' i gn a el purnea di dialogue pol eprimaedje di beacôp di programes, mins chal ni metoz nén li no di fitchî ca c' est l' programe kel dinrè.

en: These options can backup and restore all files in your /etc directory.
target: Ces tchuzes chal polèt fé des copeyes di såvrité et s' les rapexhî po tos les fitchîs do ridant /etc.

en: Thin Client
target: Tene cliyint

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
target: Cisse comande vos l' poloz ossu eployî pol tchamp «Comande po rexhe» k' i gn a el purnea di dialogue pol eprimaedje di beacôp di programes, mins chal ni metoz nén li no di fitchî ca c' est l' programe kel dinrè.

en: This dialog allows you to fine tune your bootloader:
    
     * "%s": there are three choices for your bootloader:
    
        * "%s": if you prefer grub (text menu).
    
        * "%s": if you prefer LILO with its text menu interface.
    
        * "%s": if you prefer LILO with its graphical interface.
    
     * "%s": in most cases, you will not change the default ("%s"), but if
    you prefer, the bootloader can be installed on the second hard drive
    ("%s"), or even on a floppy disk ("%s");
    
     * "%s": after a boot or a reboot of the computer, this is the delay
    given to the user at the console to select a boot entry other than the
    default.
    
    !! Beware that if you choose not to install a bootloader (by selecting
    "%s"), you must ensure that you have a way to boot your Mandrake Linux
    system! Be sure you know what you are doing before changing any of the
    options. !!
    
    Clicking the "%s" button in this dialog will offer advanced options which
    are normally reserved for the expert user.
target: Ci purnea chal vos permete d' apontyî spepieuzmint voste enondrece:
    
     * «%s»: vos avoz troes tchuzes:
    
        * «%s»: si vos voeyoz pus voltî grub (menu tecse).
    
        * «%s»: si vos voeyoz pus voltî LILO avou
    si eterface di menus e môde tecse.
    
        * «%s»: si vos voeyoz pus voltî LILO avou
    si eterface di menus grafikes.
    
     * «%s»: dins l' plupårt des cas, vos n' divoz nén
    candjî li prémetou éndjin («%s»), mins si vos l' voloz, l' enondrece
    pout esse astalêye sol deujhinme deure plake («%s») ou minme
    so ene plakete («%s»);
    
     * «%s»: cwand li copiutrece est
    renondêye, c' est l' tins a leyî po l' uzeu poleur candjî l' tchuze
    do sistinme d' operance a-z enonder dins l' menu di l' enondrece.
    
    !! Atincion ki si vos tchoezixhoz di n' nén astaler d' enondrece (si vos
    clitchîz so «%s» chal), vos vos dvoz acertiner d' aveur on moyén
    d' enonder vosse sistinme Mandrake Linux! Ossu, i vs fåt bén esse seur
    di çou k' vos fjhoz dvant d' candjî les tchuzes. !!
    
    Si vos clitchîz sol boton «%s» di ç' purnea chal, vos åroz
    sacwantès tchuzes di pus, ki sont po des uzeus pus avancîs.

en: This dialog is used to choose which services you wish to start at boot
    time.
    
    DrakX will list all the services available on the current installation.
    Review each one carefully and uncheck those which are not needed at boot
    time.
    
    A short explanatory text will be displayed about a service when it is
    selected. However, if you are not sure whether a service is useful or not,
    it is safer to leave the default behavior.
    
    !! At this stage, be very careful if you intend to use your machine as a
    server: you will probably not want to start any services that you do not
    need. Please remember that several services can be dangerous if they are
    enabled on a server. In general, select only the services you really need.
    !!
target: Asteure, vos poloz bén tchoezi les kés siervices ki s' divèt mete en alaedje
    cwand c' est ki vosse copiutrece s' enonde.
    
    Chal sont prezintés tos les siervices k' i gn a el astalåcion do moumint.
    Prindoz sogne delzès verifyî et disclitchîz les cis k' i gn end a pont
    tofer mezåjhe a l' enondaedje.
    
    Cwand vosse tchoezixhoz on siervice, ene racsegne aparexhe po vs
    dire çou ki l' siervice fwait. Si vos n' estoz nén seur si on siervice
    est ahessåve por vos ou nén, vos estoz todi a houte tot l' leyant a si
    prémetowe valixhance.
    
    !!
    Loukîz a vosse sogne si voste éndjole serè eployeye come sierveu: c' est
    dandjureu mî di n' nén enonder les siervices ki vos n' avoz nén dandjî!
    Rimimbrez vs ki des siervices k' i gn a polèt esse riskeus s' i sont
    metous so on sierveu. Tchoezixhoz djusse les siervices ki vos avoz dandjî.
    !!

en: This directory should remain within the root filesystem
target: Ci ridant chal doet esse el mwaisse sistinme di fitchîs

en: This encryption key is too simple (must be at least %d characters long)
target: Cisse clé d' ecriptaedje est trop simpe (ele doet esse d' å moens %d letes)

en: This floppy is not FAT formatted
target: Cisse plakete chal n' a nén stî abwesnêye e FAT

en: This host is already in the list, it cannot be added again.
target: Ci lodjoe chal est ddja el djivêye, i n' pout nén esse radjouté co ene feye.

en: This host/network is already in the list, it cannot be added again.
target: Ci lodjoe/cisse rantoele est ddja el djivêye, i/ele ni pout nén esse radjoutêye co ene feye.

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
target: Ciste eterface n' a nén co stî apontieye.
    Enondez li macrea d' apontiaedje a pårti do mwaisse purnea

en: This is HardDrake, a Mandrake hardware configuration tool.
    <span foreground="royalblue3">Version:</span> %s
    <span foreground="royalblue3">Author:</span> Thierry Vignaud &lt;tvignaud\@mandrakesoft.com&gt;
target: Çouchal c' est HardDrake, l' usteye d' apontiaedje del éndjolreye di Mandrake.
    <span foreground="royalblue3">Modêye:</span> %s
    <span foreground="royalblue3">Oteur:</span> Thierry Vignaud <tvignaud\@mandrakesoft.com>

en: This is a mandatory package, it can't be unselected
target: Ci pacaedje est obligatwere, vos n' poloz nén li distchoezi

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
target: Les minmes sacwès ki pol livea di dvant, mins asteure li sistinme est seré totafwait.
    Li såvrité est å pus grand.

en: This is the most crucial decision point for the security of your GNU/Linux
    system: you have to enter the "root" password. "Root" is the system
    administrator and is the only user authorized to make updates, add users,
    change the overall system configuration, and so on. In short, "root" can
    do everything! That is why you must choose a password that is difficult to
    guess - DrakX will tell you if the password that you chose too easy. As you
    can see, you are not forced to enter a password, but we strongly advise you
    against this. GNU/Linux is just as prone to operator error as any other
    operating system. Since "root" can overcome all limitations and
    unintentionally erase all data on partitions by carelessly accessing the
    partitions themselves, it is important that it be difficult to become
    "root".
    
    The password should be a mixture of alphanumeric characters and at least 8
    characters long. Never write down the "root" password -- it makes it far
    too easy to compromise a system.
    
    One caveat -- do not make the password too long or complicated because you
    must be able to remember it!
    
    The password will not be displayed on screen as you type it in. To reduce
    the chance of a blind typing error you will need to enter the password
    twice. If you do happen to make the same typing error twice, this
    ``incorrect'' password will be the one you will have use the first time you
    connect.
    
    If you wish access to this computer to be controlled by an authentication
    server, click the "%s" button.
    
    If your network uses either LDAP, NIS, or PDC Windows Domain authentication
    services, select the appropriate one for "%s". If you do not know which
    one to use, you should ask your network administrator.
    
    If you happen to have problems with remembering passwords, if your computer
    will never be connected to the internet or that you absolutely trust
    everybody who uses your computer, you can choose to have "%s".
target: Çouchal c' est li pus consecante decision pol såvrité di vosse sistinme
    GNU/Linux: vos dvoz dner li scret po «root». «root» est li manaedjeu
    do sistinme eyet l' seu otorijhî a fé des metaedjes a djoû, radjouter
    des uzeus, candjî l' apontiaedje djenerå do sistinme, evnd. Po fé court,
    «root» pout fé ttafwait! C' est po çoula k' i vs fåt bén tchoezi li scret
    di «root», onk ki soeye målåjhey a trover - DrakX vos dirè s' il est trop
    åjhey. Come vos l' poloz vey, vos avoz l' tchuze di n' nén dner di scret,
    mins nos nel consians nén; «root» pout tot fé, çoula vout dire eto k' i pout
    disfacer -- minme sins l' voleur -- tot çou k' i gn a so les deurès
    plakes, minme so les pårticions d' ôtes sistinmes d' operance; i våt mî
    n' eployî l' conte «root» ki vormint cwand nd a mezåjhe, et po çoula
    våt mî nén rinde l' accès å conte trop åjhey.
    
    Li scret dvreut maxhî des letes et des chifes ey esse 8 caracteres long.
    Ni scrijhoz måy li scret di «root» ene sawice - c' est on trop grand
    risse po vosse sistinme.
    
    Mins nerén, nel fijhoz nén trop long ou trop målåjhey ki vos n' arivez
    nén a vos l' rimimbrer!
    
    Li scret ni srè nén håyné sol waitroûle cwand vos l' tapez, po çoula vos
    dvoz l' diner deus côps, po bén l' acertiner et k' i gn åye moens di
    fé ene flotche tot l' tapant. Si vos tapez deus côps avou l' minme
    flotche, si srè ci scret «incorek» la k' i vs fårè dner l' côp ki vént.
    
    Si vos vloz ki l' contrôle des screts soeye fwait pa on sierveu d' otintifiaedje
    (come NIS ou LDAP), adon clitchîz sol boton «%s».
    
    Si vosse rantoele eploye li protocole LDAP, NIS ou les dominnes Windows PDC
    po l' otintifiaedje, tchoezixhoz li moyén d' otintifiaedje corek po «%s».
    Si vos n' savoz nén, dimandez a l' administrateu del rantoele locåle.
    
    Si vos avoz des rujhes po vs rimimbrer les screts, vos ploz tchoezi di
    n' eployî «%s», si voste éndjole n' est nén raloyeye al daegntoele
    et si vos avoz fiyate a totes les djins k' ont accès al copiutrece.

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
target: Çouchal c' est l' livea di såvrité standård po ene copiutrece ki va esse eployeye po si raloyî al rantoele daegnrece come cliyint.

en: This label is already used
target: Cisse etikete la est ddja eployeye

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
target: Ci livea chal doet esse eployî avou sogne. Avou lu vosse sistinme srè pus
    åjhey a eployî, mins avou moens di såvrité: i n' fåt nén l' eployî po ene
    éndjole raloyeye a ene rantoele. I gn a pont di scret po-z intrer.

en: This machine
target: So ciste éndjole chal

en: This may take a moment to erase the media.
target: Çoula pout prinde do tins po disfacer l' sopoirt.

en: This may take a moment to generate the keys.
target: Çouchal pout prinde on moumint di fé les clés.

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
target: Ci pacaedje chal tchedje li taprece tchoezeye e /etc/sysconfig/keyboard.
    Çoula pout esse apontyî avou l' usteye kbdconfig.
    Vos l' dvoz leyî en alaedje pol plupårt des éndjoles.

en: This package must be upgraded.
    Are you sure you want to deselect it?
target: Ci pacaedje ci duvreut esse metou a djoû
    Estoz seur ki vos l' voloz distchoezi?

en: This partition can't be used for loopback
target: Cisse pårticion ni pout nén esse eployeye pol loopback

en: This partition is not resizeable
target: Cisse pårticion ni pout nén candjî si grandeu

en: This password is too short (it must be at least %d characters long)
target: Ci scret chal est trop simpe (i doet esse d' å moens %d letes)

en: This password is too simple
target: Ci scret chal est pår trop simpe

en: This product is available on the MandrakeStore Web site.
target: Ci prodût chal si pout trover sol waibe di MandrakeStore

en: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
target: Çouchal, c' est on libe programe; vos l' poloz bén spåde et vos l' poloz
    bén candjî tot shuvant li Licince Publike Djeneråle (GPL) di GNU eplaideye
    pal Free Software Foundation; ça pout esse li 2e modêye del licince ou
    (si vos inmez mî) ene pus nouve.
    
    Li programe est spårdou avou l' espwer k' i serè ahessåve,
    mins SINS NOLE WAERANTEYE; dji n' waeranti nén minme ki vos VINDRÎZ
    bén li programe ou ki vos vs È SIEVRÎZ BÉN PO ENE SÔRE OU L' ÔTE.
    Waitîz li Licince Publike Djeneråle (GPL) di GNU po vey les pondants
    eyet les djondants.
    
    Avou ci programe ci, vos dvrîz aveur rçuvou ene copeye del Licince Publike
    Djeneråle (GPL) di GNU; si vos n' l' avoz nén avou, sicrijhoz al
        Free SoftWare Foundation, Inc.,
        59 Temple Place - Suite 330,
        Boston, MA 02111-1307, USA.

en: This server is already in the list, it cannot be added again.
target: Ci sierveu chal est ddja el djivêye, i n' pout nén esse radjouté co ene feye.

en: This setting will be activated after the installation.
    During installation, you will need to use the Right Control
    key to switch between the different keyboard layouts.
target: Ces apontiaedjes vont esse metous en alaedje après l' astalåcion.
    Tins del instalåcion, vos dvroz eployî li tape Control di droete
    po discandjî inte les diferinnès sôres di taprece.

en: This step is activated only if an old GNU/Linux partition has been found on
    your machine.
    
    DrakX now needs to know if you want to perform a new install or an upgrade
    of an existing Mandrake Linux system:
    
     * "%s": For the most part, this completely wipes out the old system. If
    you wish to change how your hard drives are partitioned, or change the file
    system, you should use this option. However, depending on your partitioning
    scheme, you can prevent some of your existing data from being over-written.
    
     * "%s": this installation class allows you to update the packages
    currently installed on your Mandrake Linux system. Your current
    partitioning scheme and user data is not altered. Most of other
    configuration steps remain available, similar to a standard installation.
    
    Using the ``Upgrade'' option should work fine on Mandrake Linux systems
    running version "8.1" or later. Performing an Upgrade on versions prior
    to Mandrake Linux version "8.1" is not recommended.
target: Ciste etape est enondêye seulmint si ene viye pårticion GNU/Linux a stî
    trovêye so voste éndjole.
    
    DrakX asteure a mezåjhe di saveur si vos vloz fé ene novele astalåcion
    oudonbén fé on metaedje a djoû d' on sistinme Mandrake Linux k' i gn a
    ddja sol plake:
    
     * «%s»: çouchal va spotchî ttafwait l' vî sistinme k' i gn
    aveut sol plake. Si vos vloz candjî l' manire ki vos deurès plakes sont
    pårteyes, oudonbén candjî li sistinme di fitchîs, vos dvrîz tchoezi
    çouchal. Sorlon vosse pårtixhaedje, si vos avoz « /home » so ene
    pårticion da sinne metans, vos ploz wårder on boket di vos dnêyes
    ki n' seront nén spotcheyes.
    
     * «%s»: cisse classe d' astalaedje chal vos permete di
    mete a djoû les pacaedjes k' i gn a so vosse sistinme Mandrake Linux.
    Vosse pårtixhaedje est wårdé et les dnêyes des uzeus n' sont nén
    candjeyes. Li plupårt des ôtès etapes d' apontiaedje dimorèt, come
    pol cas d' èn astalaedje sitandård.
    
    Eployî l' tchuze «Metaedje a djoû» rote comufåt po mete a djoû des
    sistinmes Mandrake Linux modêye «8.1» ou pus nouve. Mins l' fé po
    des modêyes di Mandrake Linux pus viyes kel «8.1» n' est nén ricmandé.

en: This theme does not yet have a bootsplash in %s !
target: Ci tinme chal n' a nén co di waitroûle d' enondaedje e %s!

en: This user name has already been added
target: Ci no d' uzeu a ddja stî radjouté

en: This will take a few minutes.
target: Çouchal prindrè sacwantès munutes.

en: Thursday
target: Djudi

en: Time remaining
target: Tins ki dmeure

en: Timezone
target: Coisse d' eureye

en: Title
target: Tite

en: To activate the mouse,
target: Po mete en alaedje li sori,

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
target: Po vos poleur eprimî avou vosse Lexmark inkjet eyet cist apontiaedje chal, i vs fåt les mineus po les scrireces a djet d' intche di Lexmark. Alez sol waibe http://www.lexmark.com et clitchîz sol boton «Drivers». Poy, tchoezixhoz vosse modele, et «Linux» come sistinme d' operance. Les mineus vnèt come des pacaedjes RPM ou des scripes shell avou ene eterface d' astalaedje eteractive grafike. Vos n' avoz nén mezåjhe del apontyî avou ciste eterface grafike. Clitchîz so «Rinoncî» djusse après accepter l' licince, et poy fijhoz rexhe les pådjes po mete e roye les tiesse d' eprimaedje avou «lexmarkmaintain» et coridjîz s' i fåt l' aroymint des tiesse d' eprimaedje avou ci programe la.

en: To ensure data integrity after resizing the partition(s), 
    filesystem checks will be run on your next boot into Windows(TM)
target: Po-z acertiner ki vos dnêyes sont bén etires après l' candjmint 
    d' grandeu del pårticion, on verifiaedje do sistinme di fitchî serè-st 
    enondé li côp ki vént ki Windows(tm) serè-st enondé

en: To get a list of the options available for the current printer click on the "Print option list" button.
target: Po-z aveur ene djivêye des tchuzes k' i gn a pol sicrirece clitchîz sol boton «Djivêye des tchuzes pol eprimaedje».

en: To get access to printers on remote CUPS servers in your local network you only need to turn on the "Automatically find available printers on remote machines" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the "Remote printers" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s).
target: Po-z eployî des scrireces so des sierveus CUPS å lon di vosse rantoele locåle vos dvoz seulmint tchoezi «Trover otomaticmint les scrireces so des éndjoles då lon»; li sierveu CUPS informrè otomaticmint voste éndjole å dfait des scrireces k' i gn a. Totes les scrireces kinoxhowes da voste éndjole sont håynêyes dins l' seccion «Sicrireces då lon» do mwaisse purnea di Printerdrake. si vos sierveu(s) CUPS n' sont nén dins vosse segmint del rantoele locåle, vos dvoz dner leu adresse(s) IP et motoit ossu les limero(s) des pôrt(s) a-z eployî po-z aveur les informåcions so les scrireces raloyeyes åzès sierveu(s).

en: To have more partitions, please delete one to be able to create an extended partition
target: Po-z aveur pus d' pårticions, vos dvoz disfacer ene, po poleur askepyî ene stindowe pårticion

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s%s
target: Po-z saveur les tchuzes k' i gn a pol sicrirece léjhoz li djivêye chal pa dzo oudonbén clitchîz sol boton «Djivêye des tchuzes pol eprimaedje». %s%s%s

en: To modify and to create in different languages such as Perl, Python, C and C++ has never been so easy thanks to GNU gcc 3 and the best Open Source development environments.
target: Diswalper dins diferins lingaedjes come Perl, Python, li C eyet li C++ n' a måy sitî pus åjhey, gråces al  poujhance do copileu GNU gcc 3 eyet des meyeus evironmints di diswalpaedje e libe programes.

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
target: Po-z eprimî on fitchî a pårti del roye di comande (d' on purnea terminå) eployîz li comande «%s <fitchî>» oudonbén «%s <fitchî>».

en: To print a file from the command line (terminal window) use the command "%s <file>".
target: Po-z eprimî on fitchî a pårti del roye di comande (d' on purnea terminå) eployîz li comande «%s <fitchî>».

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
target: Po-z eprimî on fitchî a pårti del roye di comande (d' on purnea terminå) eployîz li comande «%s <fitchî>» oudonbén ene usteye d' eprimaedje grafike: «xpp <fitchî>» ou «kprinter <fitchî>». Les usteyes grafikes permetèt di tchoezi li scrirece a rexhe avou et candjî åjheymint les tchuzes.

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
target: Po rexhe avou ene sicrirece NetWare, vos dvoz diner li no NetWare do sierveu di scrireces (ki pout ni nén esse li minme ki si no di lodjoe TCP/IP) di minme ki li no del caweye del scrirece ki vos voloz eployî, eyet les nos et mots di passe des uzeus k' i fåreut.

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
target: Po rexhe avou ene sicrirece SMB, vos dvoz dner li no SMB do lodjoe (ki pout ni nén esse li minme ki si no di lodjoe TCP/IP) et motoit si adresse IP, di minme ki li no del pårteye scrirece ki vos vloz eployî, eyet les nos, mots di passe des uzeus et informåcion des hopeas d' ovraedje k' i fåreut.

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
target: Po-z eprimî avou ene sicrirece TCP ou soket, vos dvoz dner li no d' lodjoe ou l' adresse IP del sicrirece, et motoit ossu li limero do pôrt (si prémetowe valixhance est 9100). So les sierveus HP JetDirect li pôrt est normålmint li 9100, so d' ôtes sierveus çoula pout candjî. Léjhoz li manuel di voste éndjolreye.

en: To share your own knowledge and help build Linux software, join our discussion forums on our "Community" webpages.
target: Voloz vs aprinde di pus sol cominålté Open Source eyet des libes programes? Po pårtaedjî vos cnoxhances eyet aidî a fé des clapantès usteyes, abounez vs ås foroms di copinaedjes ki vos trovroz dins nos pådjes waibe «Comunity»

en: To submit a bug report, click on the button report.
    This will open  a web browser window on %s
     where you'll find a form to fill in.  The information displayed above will be 
    transferred to that server.
target: Po-z evoyî on rapoirt di bug, clitchîz sol boton di rapoirt.
    Çoula droveyrè on betchteu sol waibe %s
    wice ki vos trovroz des kesse a rimpli.
    Les informåcions håynêyes chal å dzeur seront evoyeyes sol sierveu.

en: To submit a bug report, click the report button, which will open your default browser
    to Anthill where you will be able to upload the above information as a bug report.
target: Po-z evoyî on rapoirt di bug, clitchîz sol boton di rapoirt.
    Çoula droveyrè on betchteu sol waibe da Anthill
    wice ki vos trovroz des kesse a rimpli po fé on rapoirt di bug.

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
target: Po-z eployî ene sicrirece lpd å lon, vos dvoz dner li no di lodjoe do sierveu di scrireces eyet li no del sicrirece sol sierveu.

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
target: Po-z eployî cisse tchuze di pacaedjes k' a stî schapêye, enondez l' astalaedje avou «linux defcfg=floppy»

en: Toggle between flat and group sorted
target: Passer di nou relijhaedje a on relijhaedje pa hopeas

en: Toggle between normal/expert mode
target: Candjî pol môde normå/spepieus

en: Toggle to expert mode
target: Candjî pol môde sipepieus

en: Toggle to normal mode
target: Candjî pol môde normå

en: Tools to ease the configuration of your computer
target: Usteyes po vos aveur pus åjhey d' apontyî vosse copiutrece

en: Total Progress
target: Avançmint totå

en: Total progress
target: Totå di l' avançmint

en: Total size: %d / %d MB
target: Grandeu å totå: %d / %d Mo

en: Track network card id (useful for laptops)
target: Aler vey l' idintifiant del cåte rantoele (ça pout siervi po les poirtåves)

en: Transfer Now
target: Transferer do côp

en: Transfer printer configuration
target: Transferer l' apontiaedje del sicrirece

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s\@%s
    
    without being prompted for a password.
target: Li transfert a stî comufåt
    Vos ploz verifyî ki vs poloz elodjî sol sierveu avou l' comande:
    
    ssh -i %s %s\@%s
    
    et vs acertiner k' i n' vs dimande nén po on scret.

en: Transferring %s...
target: Transfer di %s ...

en: Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!
target: Fé di voste éndjole on poujhant sierveu e seulmint sacwants clitchs di vosse sori: sierveus waibe, d' emilaedje, côpe feu, routeu, di fitchîs et d' eprimaedje,...

en: Trinidad and Tobago
target: Trinité et Tobago

en: True Type fonts installation
target: Astalaedje des fontes True Type

en: True Type install done
target: Astalaedje des fontes True Type fwait

en: Truly minimal install
target: Astalåcion vormint minimåle

en: Truly minimal install (especially no urpmi)
target: Astalåcion vormint minimom (i gn a nén di urpmi)

en: Trying to rescue partition table
target: Dji saye di rapexhî li tåvlea di pårtixhaedje

en: Tuesday
target: Mårdi

en: Tuner type:
target: Sôre di _tuner_:

en: Tunisia
target: Tunizeye

en: Turkey
target: Turkeye

en: Turkish (modern "Q" model)
target: Turke (cogne modiene «Q»)

en: Turkish (traditional "F" model)
target: Turke (cogne wårdiveuse «F»)

en: Turkmenistan
target: Turcmenistan

en: Turks and Caicos Islands
target: Iyes Turks eyet Caicos

en: Turn your computer into a reliable server
target: Fijhoz di voste éndjole on stocaesse sierveu.

en: Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine.
target: Mete çouchal en alaedje permete d' eprimî des fitchîs e peur tecse e djaponès. Nel eployîz ki si vos vloz vormint eprimî des tecses e djaponès, ca cwand c' est metou en alaedje vos n' poloz nén eprimî des latenès letes avou des accints dins des fitchîs e peur tecse, et vos n' pôroz nerén candjî l' grandeu des mådjes, li grandeu des letes, evnd. Ciste apontiaedje n' est ki po les scrireces defineyes so ciste éndjole chal. Si vos vloz eprimî des tecses e djaponès son ene sicrirece å lon, vos dvoz mete en alaedje cisse tchuze chal so l' éndjole då lon.

en: Tuvalu
target: Touvalou

en: Tvcard
target: Cåte tévé

en: Type
target: Sôre

en: Type of install
target: Sôre d' astalaedje

en: Type:
target: Sôre:

en: Type:
target: Sôre:

en: UK keyboard
target: Taprece do Rweyåme Uni

en: URL should begin with 'ftp:' or 'http:'
target: Li hårdêye doet cmincî avou «http:» ou «ftp:»

en: US keyboard
target: Taprece des Estats Unis

en: US keyboard (international)
target: Taprece des Estats Unis (moitès tapes)

en: USA (broadcast)
target: USA (pa waches)

en: USA (cable)
target: USA (cåbe-TV)

en: USA (cable-hrc)
target: USA (cåbe-hrc)

en: USB controllers
target: Controleus USB

en: USB printer
target: Sicrirece USB

en: USB printer #%s
target: Sicrirece USB #%s

en: Uganda
target: Ouganda

en: Ukraine
target: Ucrinne

en: Ukrainian
target: Ucrainyinne

en: Unable to contact mirror %s
target: Dji n' a savou m' raloyî å muroe %s

en: Unable to find backups to restore...
target: Dji n' sai trover les copeyes di såvrité a rapexhî...

en: Unable to fork: %s
target: Dji n' a savou fé on fork: %s

en: Unable to properly close mkbootdisk:
    
    <span foreground="Red"><tt>%s</tt></span>
target: Dji n' a savou clôre comifåt mkbootdisk: 
    
    <span foreground="Red"><tt>%s</tt></span>

en: Unable to start live upgrade !!!
target: Dji n' sai enonder li vicant metaedje a djoû !!!

en: Under Devel ... please wait.
target: Todi e diswalpaedje ... i vs fårè tårdjî disk' å côp ki vént.

en: Undo
target: Disfé

en: Uninstall Fonts
target: Disastaler les fontes

en: United Arab Emirates
target: Emirats Arabes Unis

en: United Kingdom
target: Rweyåme-Uni

en: United States
target: Estats Unis

en: Unknown
target: Nén cnoxhou

en: Unknown Model
target: Modele nén cnoxhou

en: Unknown driver
target: Mineu nén cnoxhou

en: Unknown model
target: Modele nén cnoxhou

en: Unknown/Others
target: Nén cnoxhou|Ôtes

en: Unknown|CPH05X (bt878) [many vendors]
target: Nén cnoxhou|CPH05X (bt878) [bråmint di vindeus]

en: Unknown|CPH06X (bt878) [many vendors]
target: Nén cnoxhou|CPH06X (bt878) [bråmint di vindeus]

en: Unknown|Generic
target: Nén cnoxhou|Djenerike

en: Unmount
target: Dismonter

en: Unsafe
target: Nén seur

en: Unselect fonts installed
target: Distchoezi les fontes astalêyes

en: Unselected All
target: Distchoezi tot

en: Up
target: Monter

en: Updating package selection
target: Metaedje a djoû del tchuze des pacaedjes

en: Upgrade
target: Metaedje a djoû

en: Upgrade %s
target: Metaedje a djoû di %s

en: Uruguay
target: Ourougway

en: Usage of remote scanners
target: Eployaedje des scanreces då lon

en: Use .backupignore files
target: Eployî les fitchîs .backupignore

en: Use CD-R/DVD-R to backup
target: Eployî CD/DVDROM pol copeye di såvrité

en: Use Expect for SSH
target: Eployî «expect» po SSH

en: Use Hard Disk to backup
target: Eployî li deure plake po les copeyes di såvrité

en: Use Unicode by default
target: Eployî l' ecôdaedje unicôde

en: Use Xinerama extension
target: Eployî l' egztension «Xinerama»

en: Use ``%s'' instead
target: Eployî «%s» al plaece

en: Use ``Unmount'' first
target: Eployî «Dismonter» al plaece

en: Use a floppy
target: Eployî ene plakete

en: Use auto detection
target: Eployî li deteccion otomatike

en: Use daemon
target: Eployî démon

en: Use existing partition
target: Eployî les pårticions k' i gn a

en: Use existing partitions
target: Eployî les pårticions k' i gn a

en: Use fdisk
target: Eployî fdisk

en: Use for loopback
target: Eployî po loopback

en: Use free space
target: Eployî l' plaece libe

en: Use group id for execution
target: Eployî l' id do groupe po l' enondaedje

en: Use libsafe for servers
target: Eployî libsafe po les sierveus

en: Use my Windows partition
target: Eployî l' pårticion da Windows

en: Use network connection to backup
target: Eployî raloyaedje rantoele pol copeye di såvrité

en: Use owner id for execution
target: Eployî l' id do prôpietaire po l' enondaedje

en: Use password to authenticate users
target: Eployî des screts po-z otintifyî les uzeus

en: Use password to authenticate users.
target: Eployî des screts po-z otintifyî les uzeus

en: Use quota for backup files.
target: Eployî les cwotas po les fitchîs di copeye di såvrité

en: Use scanners on remote computers
target: Eployî les scanreces so des copiutreces då lon

en: Use tape to backup
target: Eployî ene binde pol copeye di såvrité

en: Use the %c and %c keys for selecting which entry is highlighted.
target: Eployiz les tapes %c et %c po mete les intreyes e sorbriyance.

en: Use the Windows partition for loopback
target: Eployî li pårticion Windows pol loopback

en: Use the free space on the Windows partition
target: Eployî l' plaece libe sol pårticion Windows

en: Use the scanners on hosts:
target: Eployî les scanreces so les lodjoes:

en: Used for directory:
     only owner of directory or file in this directory can delete it
target: Eployî po les ridants:
     seulmint li prôpietaire do ridant ou do fitchî el pout disfacer

en: Useless without Terminal Server
target: Èn sieve a rén sins sierveu di terminås

en: User
target: Uzeu

en: User :
target: uzeu:

en: User name
target: No di l' uzeu

en: User umask
target: umask (prémetowès permissions) po l' uzeu

en: Username
target: No d' uzeu

en: Username required
target: I gn a mezåjhe do no d' uzeu

en: Users
target: Uzeus

en: Uses command %s
target: Tot-z eployant li cmande %s

en: Usually, DrakX has no problems detecting the number of buttons on your
    mouse. If it does, it assumes you have a two-button mouse and will
    configure it for third-button emulation. The third-button mouse button of a
    two-button mouse can be ``pressed'' by simultaneously clicking the left and
    right mouse buttons. DrakX will automatically know whether your mouse uses
    a PS/2, serial or USB interface.
    
    If for some reason you wish to specify a different type of mouse, select it
    from the list provided.
    
    If you choose a mouse other than the default, a test screen will be
    displayed. Use the buttons and wheel to verify that the settings are
    correct and that the mouse is working correctly. If the mouse is not
    working well, press the space bar or [Return] key to cancel the test and to
    go back to the list of choices.
    
    Wheel mice are occasionally not detected automatically, so you will need to
    select your mouse from a list. Be sure to select the one corresponding to
    the port that your mouse is attached to. After selecting a mouse and
    pressing the "%s" button, a mouse image is displayed on-screen. Scroll
    the mouse wheel to ensure that it is activated correctly. Once you see the
    on-screen scroll wheel moving as you scroll your mouse wheel, test the
    buttons and check that the mouse pointer moves on-screen as you move your
    mouse.
target: D' acostumance, DrakX n' a nole rujhe po trover l' nombe di botons di
    vosse sori. S' i n' trove nén, i pinsrè ki vos avoz ene sori di deus
    botons, et va mete en alaedje l' emulåcion do troejhinme boton. DrakX
    sårè otomaticmint si vosse sori est ene sori PS/2, séreye oudonbén USB.
    
    Si vos vloz defini ene sôre di sori diferinne, tchoezixhoz li sôre k' i fåt el djivêye.
    
    Si vos fjhoz ene tchuze diferinne del prémetowe, DrakX vos mosterrè on
    purnea po sayî l' sori. Sayîz les botons et li rôlete po vey si tot va
    comufåt. Si l' sori ni rote nén comufåt, tapez so l' espåce, oudonbén so
    RETURN po rivni èn erî eyet ndè tchoezi ene ôte.
    Des côps k' i gn a, les soris a rôlete èn sont nén detectêyes otomaticmint
    et vos dvroz l' tchoezi dins ene djivêye. Acertinez vs di tchoezi l' cene
    ki coresponde å pôrt ki vosse sori est raloyeye. Après aveurtchoezi ene sori
    eyet clitchî sol boton «%s», ene imådje d' ene sori est håynêye el
    waitroûle. Fijhoz bodjî l' rôlete po verifyî k' ele rote comufåt.
    On côp ki vos voeyoz l' imådje del rôlete sol waitroûle ki bodje del minme
    manire ki vos fjhoz bodjî l' rôlete, sayîz les botons eyet vey si
    l' cursoe shût bén les movmints del sori.

en: Uzbek (cyrillic)
target: Ouzbeke (cirilike)

en: Uzbekistan
target: Ouzbekistan

en: Valid user list changed, rewriting config file.
target: Li djivêye des uzeus valides a candjî, riscrijhant l' fitchî d' apontiaedje.

en: Various
target: Totès sôres

en: Vendor
target: Vindeu

en: Verify that %s is the correct path
target: Acertinez vs ki «%s» est bén l' tchimin corek

en: Version:
target: Modêye:

en: Vertical refresh rate
target: Frécwénce di rafristaedje d' astampé

en: Video mode
target: Môde videyo

en: Videocard
target: Cåte videyo

en: Vietnamese "numeric row" QWERTY
target: Vietnamyinne QWERTY (roye des limeros)

en: View Backup Configuration.
target: Vey l' apontiaedje po les copeyes di såvrité.

en: View Configuration
target: Vey l' apontiaedje

en: View Last Log
target: Vey li dierin djournå

en: Virgin Islands (British)
target: Iyes Viedjes (Britanikes)

en: Virgin Islands (U.S.)
target: Iyes Viedjes (USA)

en: WARNING
target: ADVIERTIXHMINT

en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful: this
    operation is dangerous. If you have not already done so, you
    first need to exit the installation, run "chkdsk c:" from a
    Command Prompt under Windows (beware, running graphical program
    "scandisk" is not enough, be sure to use "chkdsk" in a
    Command Prompt!), optionally run defrag, then restart the
    installation. You should also backup your data.
    When sure, press Ok.
target: ASTEME!
    
    Asteure, DrakX va candjî li grandeu di vosse pårticion Windows.
    Loukîz a vos: çoula est dandjureu. Si vos n' l' avoz nén co fwait,
    enondez (so Windows) «chkdsk c:» a pårti del roye di cmande (atincion
    kel programe grafike «scandisk» c' est nén assez, i vs fåt eployî
    «chkdsk» sol roye di cmande!), motoit eto enonder «defrag»,
    et s' fijhoz ene copeye di såvrité di vos dnêyes dvant di renonder 
    l' astalaedje.
    Cwand vos seroz seur di vos, clitchîz so «'l est bon».

en: WARNING: this device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
target: ASTEME: Cist éndjin a ddja stî apontyî po esse raloyî al rantoele daegnrece.
    Clitchîz so «'l est bon» po wårder cist apontiaedje la.
    Oudonbén vos ploz candjî les tchamps chal pa dzeu po spotchî l' apontiaedje avou on novea.

en: Wait please
target: Tårdjîz on pô s' i vs plait.

en: Wait please, testing your connection...
target: Tårdjîz s' i vs plait, dji saye vosse raloyaedje...

en: Wallis and Futuna
target: Wallis et Futuna

en: Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!
target: Voloz ndè saveur di pus eyet pårticiper del cominålté des libes programes? Ridjondoz li monde des libes programes!

en: Warning
target: Adviertixhmint

en: Warning : IP address %s is usually reserved !
target: Adviertixhmint: l' adresse IP %s est normålmint resservêye!

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
target: Asteme! Dj' a detecté on côpe feu ddja apontyî. I vos fåreut motoit on po d' apontiaedje manuwel après l' astalåcion.

en: Warning, another Internet connection has been detected, maybe using your network
target: Asteme, èn ôte raloyaedje al daegntoele a stî detecté, motoit eployant vosse rantoele locåle

en: Warning, another internet connection has been detected, maybe using your network
target: Asteme, èn ôte raloyaedje al daegntoele a stî detecté, motoit eployant vosse rantoele locåle

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
target: Asteme, li cåte rantoele (%s) est ddja apontieye.
    
    Voloz vs rifé on rapontiaedje otomatike?
    
    Vos l' poloz fé manuwelmint mins vos dvoz saveur çou k' vos fjhoz.

en: Warning: testing this graphic card may freeze your computer
target: Loukîz a vos: sayî cisse cåte grafike chal pout djaler vosse copiutrece

en: We are now going to configure the %s connection.
    
    
    Press "%s" to continue.
target: Asteure nos alans fé l' apontiaedje do raloyaedje %s.
    
    
    Clitchîz so «%s» po continuwer.

en: Web Server
target: Sierveu waibe

en: Web/FTP
target: Sierveu, Waibe/FTP

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
target: WebDAV est on protocole ki vs permete di monter des ridants d' on sierveu
    waibe come si c' esteut on ridant locå so vosse deure plake (çoula si
    l' sierveu då lon est apontyî po fé do sierveu WebDAV).
    Si vos vloz radjouter des ponts di montaedjes WebDAV, tchoezixhoz «Novea».

en: WebDAV remote site already in sync!
target: Li lodjoe WebDAV då lon est ddja sincronijhî!

en: WebDAV transfer failed!
target: Li transfer WebDAV a fwait berwete!

en: Webcam
target: Camera

en: Webmin Service
target: Siervice Webmin

en: Wednesday
target: Mierkidi

en: Weekday
target: Djoû del samwinne

en: Welcome To Crackers
target: Ouxh å lådje po les hacneus

en: Welcome to %s
target: Wilicome a %s

en: Welcome to %s the operating system chooser!
    
    Choose an operating system from the list above or
    wait %d seconds for default boot.
target: Wilicome a %s li tchoezixheu do sistinme d' operance a enonder!
    
    Tchoezixhoz li sistinme d' operance el djiveye
    ou taordjiz %d segondes po l' enondaedje premetou.

en: Welcome to GRUB the operating system chooser!
target: Wilicome a GRUB li tchoezixheu do sistinme d' operance a enonder!

en: Welcome to The Network Configuration Wizard.
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
target: Wilicome å macrea d' apontiaedje del rantoele
    
    Dji va cmincî d' apontyî vosse raloyaedje al rantoele (daegnrece).
    Si vos n' vloz nén li deteccion otomatike, disclitchîz lu.

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
target: Wilicome al usteye d' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece!
    
    %s
    
    Clitchîz so «Apontyî» si vos vloz enonder li macrea d' apontiaedje.

en: Welcome to the Open Source world.
target: Wilicome amon les libes programes

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
target: Bénvnowe sol usteye d' apontiaedje des abranles pa emile.
    
    Chal, vos pôroz apontyî li sistinme d' abranles.

en: West Europe
target: Europe coûtchantrece

en: What
target: Cwè

en: What kind is your ISDN connection?
target: Kéne sôre di raloyaedje RDIS avoz vs?

en: What kind of card do you have?
target: Kéne sôre di cåte avoz vs?

en: What norm is your TV using?
target: Kéne nôrme fåt i eployî po vosse TV?

en: What type of partitioning?
target: Kéne sôre di pårtixhaedje?

en: Wheel
target: Rôlete

en: When
target: Cwand

en: When checked, owner and group won't be changed
target: s' il est clitchî, li prôpietaire et l' groupe èn seront nén candjîs

en: When this option is turned on, on every startup of CUPS it is automatically made sure that
    
    - if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS
    
    - if /etc/cups/cupsd.conf is missing, it will be created
    
    - when printer information is broadcasted, it does not contain "localhost" as the server name.
    
    If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points.
target: Si cisse tchuze chal est metowe, a tchaeke enondaedje di CUPS i va otomaticmint s' acertiner ki:
    
    - si LPD/LPRng est astalé, li fitchî /etc/printcap èn serè nén spotchî pa CUPS
    
    - si l' fitchî /etc/cups/cupsd.conf n' egzistêye nén, i srè-st ahivé
    
    - cwand des informåcions sol sicrirece sont-st anoncêyes sol rantoele, li no do sierveu n' est nén «localhost».
    
    Si çoula vs pout fé des problinmes, vos ploz dismete cisse tchuze ci, mins adon vos dvroz fé atincion a ces ponts chal pa dzeur.

en: Where
target: Wice

en: Where do you want to install the bootloader?
target: Wice ki vos voloz astaler l' enondrece?

en: Where do you want to mount %s?
target: Wice voloz vs monter %s?

en: Where do you want to mount device %s?
target: Wice voloz vs monter l' éndjin %s?

en: Where do you want to mount the loopback file %s?
target: Wice voloz vs monter l' fitchî di loopback %s?

en: Whether the FPU has an irq vector
target: Si l' FPU a-st on vecteur d' irq ou nén

en: Which %s driver should I try?
target: Kéne %s mineuse doe dju sayî?

en: Which configuration of XFree do you want to have?
target: Kén apontiaedje di XFree voloz vs?

en: Which dhcp client do you want to use ? (default is dhcp-client)
target: Ké cliyint dhcp voloz vs eployî? (Li prémetou est «dhcp-client»)

en: Which disk do you want to move it to?
target: Kéne deure plake voloz vs bodjî?

en: Which filesystem do you want?
target: Ké sistinme di fitchîs voloz vs?

en: Which is your timezone?
target: Dins kéne coisse d' eureye vikez?

en: Which of the following is your ISDN card?
target: Kéne est li cåte RDIS da vosse dins l' djivêye ?

en: Which partition do you want to resize?
target: Kéne pårticion voloz vs candjî si grandeu?

en: Which partition do you want to use for Linux4Win?
target: Kéne pårticion voloz vs eployî po-z î mete Linux4win?

en: Which printer model do you have?
target: Ké modele di scrirece avoz vs?

en: Which printing system (spooler) do you want to use?
target: Ké sistinme d' eprimaedje (sôre di caweyaedje) voloz vs eployî?

en: Which protocol do you want to use?
target: Ké protocole voloz vs eployî?

en: Which sector do you want to move it to?
target: Å ké secteu voloz vs aler?

en: Which services would you like to allow the Internet to connect to?
target: Ké siervices voloz vs k' i soeye accessibe a pårti del daegntoele?

en: Which size do you want to keep for Windows on
target: Kéne grandeu voloz vs wårder po Windows sol

en: Which type of entry do you want to add?
target: Kéne sôre d' intrêye voloz vs radjouter?

en: Which username
target: Ké no d' uzeu

en: Windows Domain
target: Dominne Windows

en: Windows Migration tool
target: Usteye po-z ebaguer di Windows

en: Winmodem connection
target: Raloyaedje viè winmodem

en: With X
target: Avou X11

en: With basic documentation
target: Avou li documintåcion di båze

en: With basic documentation (recommended!)
target: Avou li documintåcion di båze (ricomandé!)

en: With this option you will be able to restore any version
     of your /etc directory.
target: Avou cisse tchuze chal vos pôroz rapexhî tot l' minme kéne
     modêye di vosse ridant /etc.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
target: Avou ci livea chal, vos poloz eployî li sistinme come on sierveu.
    Li såvrité est hôte assez ki po-z eployî li sistinme come on sierveu ki acceptrè des raloyaedjes di bråmint des cliyints. Note: si voste éndjole est seulmint on cliyint sol daegntoele vos dvrîz tchoezi on livea pus bas.

en: Wizard
target: Macrea

en: Wizard Configuration
target: Apontiaedje do macrea

en: Workgroup
target: Groupe d' ovraedje

en: Workstation
target: Posse éndjolrece

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
target: Voloz vs permete ki les uzeus polexhe pårtaedjî leus ridants?
    Si vos l' permetoz, i pôront clitchî so «Pårtaedjî» dins konqueror ou nautilus.
    
    «A vosse môde» vos permete des apontiaedjes diferins po tchaeke uzeu.

en: Would you like to try again?
target: Voloz vs rissayî?

en: Write
target: Sicrire

en: Write Config
target: Sicrire l' apontiaedje

en: Wrong email
target: Måle adresse emile

en: X (for X Window System) is the heart of the GNU/Linux graphical interface
    on which all the graphical environments (KDE, GNOME, AfterStep,
    WindowMaker, etc.) bundled with Mandrake Linux rely upon.
    
    You will be presented with a list of different parameters to change to get
    an optimal graphical display: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
    
    
    
    Monitor
    
       The installer will normally automatically detect and configure the
    monitor connected to your machine. If it is incorrect, you can choose from
    this list the monitor you actually have connected to your computer.
    
    
    
    Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
    
    
    
    Test
    
       the system will try to open a graphical screen at the desired
    resolution. If you can see the message during the test and answer "%s",
    then DrakX will proceed to the next step. If you cannot see the message, it
    means that some part of the autodetected configuration was incorrect and
    the test will automatically end after 12 seconds, bringing you back to the
    menu. Change settings until you get a correct graphical display.
    
    
    
    Options
    
       Here you can choose whether you want to have your machine automatically
    switch to a graphical interface at boot. Obviously, you want to check
    "%s" if your machine is to act as a server, or if you were not successful
    in getting the display configured.
target: X (po Sistinme di Purneas X) est l' miercour di l' eterface grafike di
    GNU/Linux, ki tos les evironmints grafikes (KDE, Gnome, AfterStep,
    WindowsMaker, evnd.) ki vnèt avou Mandrake Linux end ont mezåjhe.
    
    Vos åroz ene djivêye des diferins parametes a candjî po-z aveur
    voste eterface grafike a l' idêye:
    
    Cåte grafike
    
       Li programe d' astalaedje fwait normålmint otomaticmint li deteccion
    eyet l' apontiaedje del cåte grafike k' i gn a dins voste éndjole.
    Si c' est nén l' cas, vos ploz tchoezi e l' djivêye li cåte ki vos
    avoz po d' bon.
    
    S' i gn a des sierveus grafikes diferins po vosse cåte grafike, des cis
    k' i gn a avou del acceleråcion 3D, des ôtes sins, on vs propôzrè di
    tchoezi l' ci ki vs convént l' mî.
    
    
    
    Waitroûle
    
        L' astaleu fwait normålmint li deteccion eyet apontiaedje otomatike
    del waitroûle raloyeye a voste éndjole. Si ça n' va nén tot seu, vos ploz
    tchoezi vosse waitroûle dins ene djivêye.
    
    
    
    Finté
    
       Vos ploz tchoezi chal les fintés eyet nombe di coleurs emey les tchuzes
    possibes po voste éndjolreye. Tchoezixhoz çou ki vs convént l' mî (vos
    pôroz candjî çoula pus tård, après l' astalaedje, si vos vloz). Èn egzimpe
    do tchoezi apontiaedje est håyné e l' waitroûle.
    
    
    
    Saye
    
       Li sistinme sayrè d' enonder ene waitroûle grafike al finté dmandêye.
    Si vos ploz vey li messaedje håyné tins del saye, clitchîz so «%s», eyet
    DrakX pasrè a l' etape shuvante. Si vos n' savoz vey li messaedje, çoula
    vout dire k' ene sacwè n' a nén stî avou l' apontiaedje, eyet l' saye
    si va djoker après 12 segondes, vos ramoennant å menu. Vos î pôroz candjî
    les valixhances disk' a-z aveur ene eterface grafike ki rote comufåt.
    
    
    
    Tchuzes
    
       Chal vos ploz tchoezi si vos vloz ou nén ki l' éndjole enonde
    otomaticmint l' eterface grafike a l' enondaedje. Bén seur, vos alez
    dire «%s» si voste éndjole va fé do sierveu, ou si vos n' avoz nén
    polou apontyî comufåt l' eterface grafike.

en: X server
target: Sierveu X

en: X11 Display Manager allows you to graphically log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
target: Li manaedjeu di håynaedje di X11 vos permete di vs elodjî a pårti
    d' ene waitroûle grafike, avou li sistinme di purneas X11 en alaedje
    eyet do sopoirt po-z aveur sacwantès sessions grafikes e minme tins sol
    minme éndjole locåle.

en: XFree %s with 3D hardware acceleration
target: XFree %s avou del acceleråcion 3D

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
target: XFree %s avou del acceleråcion 3D ESPERIMENTÅLE

en: XFree configuration
target: Apontiaedje di XFree

en: XFree86 driver: %s
target: Mineu di XFree86: %s

en: XFree86 server: %s
target: Sierveu XFree86: %s

en: XawTV isn't installed!
target: XawTV n' est nén astalé!

en: Xinetd Service
target: Siervice xinetd

en: Xpmac (installation display driver)
target: Xpmac (mineu di håynaedje pol astalaedje)

en: YES
target: OYI

en: Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to
    boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly
    detected and installed in the bootloader menu. If this is not the case, you
    can add an entry by hand in this screen. Be careful to choose the correct
    parameters.
    
    Yaboot's main options are:
    
     * Init Message: a simple text message displayed before the boot prompt.
    
     * Boot Device: indicates where you want to place the information required
    to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
    to hold this information.
    
     * Open Firmware Delay: unlike LILO, there are two delays available with
    yaboot. The first delay is measured in seconds and at this point, you can
    choose between CD, OF boot, MacOS or Linux;
    
     * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
    After selecting Linux, you will have this delay in 0.1 second increments
    before your default kernel description is selected;
    
     * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
    at the first boot prompt.
    
     * Enable OF Boot?: checking this option allows you to choose ``N'' for
    Open Firmware at the first boot prompt.
    
     * Default OS: you can select which OS will boot by default when the Open
    Firmware Delay expires.
target: Yaboot est ene enondrece po ls éndjoles Macintosh NewWorld et ele pout
    esse eployeye po-z enonder GNU/Linux, MacOS ou MacOSX. Normålmint,
    MacOS eyet MacOSX sont detectés comufåt eyet metous dins l' menu del
    enondrece. Ci c' est nén l' cas, vos ploz radjouter des intrêyes
    al mwin a pårti di ci purnea chal. Prindoz asteme di bén tchoezi les
    bons parametes.
    
    Les mwaissès tchuzes di Yaboot sont:
    
     * «Messaedje d' enondaedje»: on simpe messaedje e môde tecse ki srè
    håyné dvant ki l' enondrece dene li tchamp d' intrêye po tchoezi
    li sistinme d' operance.
    
    * «Éndjin d' enondaedje»: po dire wice ki vos vloz mete l' informåcion
    k' end a mezåjhe po-z enonder GNU/Linux. Djenerålmint, vos fjhoz ene
    pårticion d' enondaedje (bootstrap) pus tård po-z î mete ciste informåcion
    chal.
     * «Tårdjaedje di l' Open Firmware»: i gn a deus tårdjaedjes avou yaboot
    (dismetant k' avou LILO end n' a k' onk). Li prumî tårdjaedje est mzuré
    e segondes, eyet asteure vos ploz tchoezi inte l' enondaedje so CD,
    avou l' OpenFirmware (OF), di MacOS ou di Linux;
    
    * «Tårdjaedje po l' enondaedje do nawea»: ci tårdjaedje chal est l' minme
    k' avou LILO. On côp ki vos tchoezixhoz Linux, vos åroz ci tårdjaedje
    chal, et dijhinmes di segonde, divant ki l' tchoezi nawea soeye enondé;
    
     * «Permete l' enondaedje pa plake lazer?»: si vos clitchîz cisse
    tchuze chal vos pôroz tchoezi « C » dins l' enondrece po-z enonder a
    pårti d' ene plake lazer.
    
     * «Permete l' enondaedje pa l' Open Firmware?»: si vos clitchîz cisse
    tchuze chal vos pôroz tchoezi « N » dins l' enondrece po-z aveur
    l' Open Firmware.
    
     * «Prémetou sistinme d' operance?»: vos ploz tchoezi li ké sistinme
    d' operance srè-st enondé otomaticmint on côp kel tårdjaedje di
    l' Open Firmware est houte.

en: Yaboot mode
target: Môde di yaboot

en: Yes
target: Oyi

en: Yes, I want autologin with this (user, desktop)
target: Oyi, dji vou l' elodjaedje otomatike po ci (uzeu, scribanne) chal

en: You appear to have an OldWorld or Unknown
     machine, the yaboot bootloader will not work for you.
    The install will continue, but you'll
     need to use BootX or some other means to boot your machine
target: I shonne ki voste éndjole est pår trop viye
     oudonbén k' ele nén cnoxhowe; adon l' enondrece
     yaboot ni rotrè nén por vos.
    L' astalaedje va continuwer, mins vos dvroz
     eployî BootX ou ôte tchoi po-z enonder voste éndjole

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
target: Vos alez apontyî ene plakete d' oto-astalaedje. Cisse fonccionålité pout esse pa des côps ene miete riskeuse et doet esse eployeye avou sogne.
    
    Avou cisse fonccionålité, vos pôroz rfé li minme astalåcion ki vos vnoz d' fé so cisse copiutrece chal, avou seulmint sacwantès kesses eteractives po pleur candjî sacwantès valixhances.
    
    Po pus di såvrité, l' etape di l' abwesnaedje des deurès plakes ni srè måy fwait otomaticmint.
    
    Voloz vs continuwer?

en: You are about to configure your computer to install a PXE server as a DHCP server
    and a TFTP server to build an installation server.
    With that feature, other computers on your local network will be installable using this computer as source.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Vos alez apontyî li copiutrece po-z astaler on sierveu PXE po fé
    do sierveu DHCP eyet TFTP po ndè fé on sierveu d' astalaedje.
    Avou çoula, les ôtès copiutreces di vosse rantoele locåle si pôront
    astaler avou cisse copiutrece chal come sourdant.
    
    Acertinez vs ki vos avoz bén apontyî vosse rantoele eyet l' accès al daegntoele avou drakconnet divant d' aler pus lon.
    
    Note: vos åroz mezåjhe d' ene cåte rantoele po vosse rantoele locåle (LAN).

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Vos alez apontyî li copiutrece da vosse po pårtaedjî li raloyaedje al daegntoele.
    Avou çoula, les ôtès copiutreces di vosse rantoele locåle si polèt raloyî
    al rantoele daegnrece å dtruviè del cene da vosse.
    
    Acertinez vs ki vos avoz bén apontyî vosse rantoele eyet l' accès al daegntoele avou drakconnet divant d' aler pus lon.
    
    Note: vos åroz mezåjhe d' ene cåte rantoele po vosse rantoele locåle (LAN).

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
target: Vos alez astaler li sistinme d' eprimaedje %s so ene éndjole k' est avou l' livea di såvrité «%s».
    
    Ci sistinme d' eprimaedje chal enonde on démon (ene bouye di fond) ki ratind après les bouyes d' eprimaedje et les manaedje. Ci démon chal pout eto esse raloyî pa des éndjoles då lon sol rantoele, dj' ô bén ça pout esse on pont possibe po les hacneus fé des atakes. Po cisse råjhon la seulmint kékes démons sont-st enondés dins ci livea di såvrité chal avou l' apontiaedje prémetou.
    
    Voloz vs vormint apontyî l' eprimaedje so ciste éndjole chal?

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
target: Vos aloz asteure apontyî l' eprimaedje so on conte Windows avou scret. Cåze d' ene flåwe del årtchitecteure do programe cliyint di Samba, li scret est metou e clair dins l' roye di cmande do cliyint Samba k' evoye li bouye d' eprimaedje å sierveu Windows. Do côp, tot uzeu so l' éndjole el pout vey avou ene usteye ou cmande di corwaitaedje des bouyes, come «ps auxwww».
    
    Nos vs ricmandans d' eployî purade ene des alternatives shuvantes (dins tos les cas vos vs divoz assurer ki seulmint les éndjoles di vosse rantoele locåle polèt aveur accès å sierveu Windows, par egzimpe eployîz on côpe-feu):
    
    Eployîz on conte sins scret sol sierveu Windows, come li conte «GUEST» ou on conte sipeciå rén k' po l' eprimaedje. Èn bodjîz nén li scret d' on conte personel et co moens do conte do manaedjeu do sierveu Windows.
    
    Apontyîz vosse sierveu Windows po k' i mete li scrirece dizo l' protocoleLPD. Adon apontyîz l' eprimaedje a pårti di ciste éndjole chal avou li sôre d' eprimaedje «%s» dins Printerdrake.

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
target: Vos estoz po-z apontyî ene sicrirece OKI laser winprinter.
    Ces scrireces la eployèt on protocole di comunicåcion foirt sipeciål, çou ki fwait k' ele ni polèt roter comufåt ki raloyeyes å prumî pôrt paralele. Cwand li scrirece est raloyeye a on ôte pôrt ou raloyeye a on sierveu d' eprimaedje, i vos l' fåt mete sol prumî pôrt paralele divant d' poleur rexhe li pådje di saye. Ôtrumint ele ni rotrè nén. Li sôre di raloyaedje ki vos avoz dné ni srè nén prindou e conte pal mineu.

en: You are currently using %s as your boot manager.
    Click on Configure to launch the setup wizard.
target: Vos eployîz ddja %s come enondrece po tchoezi
    li do sistinme d' operance a enonder.
    Clitchîz so «Apontyî» po-z enonder li macrea d' apontiaedje.

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
target: Vos alez apontyî ene sicrirece å lon. Çouchal a mezåjhe d' ene rantoele en alaedje, mins li vosse n' est nén co apontieye. Si vos continuwez sins rantoele vos n' pôroz nén sayî li scrirece ki vos apontyîz pol moumint. Cwè voloz vs fé?

en: You can add additional entries in yaboot for other operating systems,
    alternate kernels, or for an emergency boot image.
    
    For other OSs, the entry consists only of a label and the "root"
    partition.
    
    For Linux, there are a few possible options:
    
     * Label: this is the name you will have to type at the yaboot prompt to
    select this boot option.
    
     * Image: this is the name of the kernel to boot. Typically, vmlinux or a
    variation of vmlinux with an extension.
    
     * Root: the "root" device or ``/'' for your Linux installation.
    
     * Append: on Apple hardware, the kernel append option is often used to
    assist in initializing video hardware, or to enable keyboard mouse button
    emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.
    The following are some examples:
    
             video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111
    hda=autotune
    
             video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
    
     * Initrd: this option can be used either to load initial modules before
    the boot device is available, or to load a ramdisk image for an emergency
    boot situation.
    
     * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you
    need to allocate a large ramdisk, this option can be used to specify a
    ramdisk larger than the default.
    
     * Read-write: normally the "root" partition is initially mounted as
    read-only, to allow a file system check before the system becomes ``live''.
    You can override the default with this option.
    
     * NoVideo: should the Apple video hardware prove to be exceptionally
    problematic, you can select this option to boot in ``novideo'' mode, with
    native frame buffer support.
    
     * Default: selects this entry as being the default Linux selection,
    selectable by pressing ENTER at the yaboot prompt. This entry will also be
    highlighted with a ``*'' if you press [Tab] to see the boot selections.
target: Vos ploz radjouter des ôtès intrêyes po yaboot, soeye-t i po des ôtes
    sistinmes d' operance, des ôtes naweas, ou po ene imådje d' enondaedje
    po rapexhî l' sistinme.
    
    Po ds ôtes sistinmes d' operance, l' intrêye n' a mezåjhe ki d' ene
    etikete, eyet li pårticion raecene («root») po ç' sistinme la.
    
    Po Linux, i gn a sacwantès tchuzes di pus:
    
     * Etikete: tot simplumint li no ki vos vloz vey dins l' djivêye des
    sistinmes ki yaboot vos mostere po tchoezi tins d' l' enondaedje;
    
     * Imådje: çouchal c' est l' no avou si tchmin do nawea a-z enonder.
    Tipicmint, /boot/vmlinux ou ene sacwè insi;
    
     * Raecene: l' éndjin avou l' pårticion raecene (« / ») po vosse
    sistinme Linux astalé;
    
     * Bouter å coron: Avou les éndjolreyes d' amon Apple, li tchuze
    po des sacwès bouter å coron est eployeye assez sovint po-z aidî
    a inicyî l' éndjolreye pol håynaedje grafike, ou po l' emulåcion
    avou l' taprece des 2e et 3e botons ki mankèt so les soris tipikes
    d' amon Apple. Vochal on des egzimpes:
    
             video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111
    hda=autotune
    
             video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
    
     * Initrd: Cisse tchuze chal pout esse eployeye po tcherdjî des modules
    divant ki l' éndjin d' enondaedje ni soeye disponibe, oudonbén po
    tcherdjî ene imådje sipeciåle po fé on rapexhaedje do sistinme;
    
     * Grandeu-Initrd: li prémetowe grandeu del plake e memwere (ramdisk)
    est normålmint di 4.096 octets. Si vos avoz mezåjhe d' onk pus grand,
    vos l' poloz dire avou cisse tchuze chal;
    
     * Lére-sicrire: normålmint li pårticion raecene est montêye e môde
    seulmint lére po cmincî, po permete on verifiaedje do sistinme di fitchîs
    dvant k' i n' divegne «vicant».
    Chal vos ploz candjî cisse tchuze la;
    
     * NoleVidéyo: s' il astchait ki l' éndjolreye grafike d' amon Apple
    dene bråmint des rujhes, vos ploz tchoezi çouchal po-z enonder e môde
    «nole videyo» (novideo), avou rén ki l' sopoirt natif do framebuffer;
    
     * Prémetou: definixh ciste intrêye chal come li prémetowe po l' enondaedje.
    Ele srè-st enondêye djusse tchôcant li tape ENTER cwand li waitroûlêye
    di yaboot aparexhe. Ciste intrêye srè eto metowe en avant avou on « * »,
    si vos tchôkîz so [Tab] po vey les tchuzes di l' enondaedje.

en: You can also decide here whether printers on remote machines should be automatically made available on this machine.
target: Vos ploz eto decider chal si les scrireces so des éndjoles då lon dvèt esse metowes otomaticmint disponibes po ciste éndjole chal.

en: You can also decide here whether scanners on remote machines should be made available on this machine.
target: Vos ploz eto decider chal si les scanreces so des éndjoles då lon dvèt esse metowes otomaticmint disponibes po ciste éndjole chal.

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
target: Vos ploz ossu eployî l' eterface grafike «xpdq» po defini des tchuzes et 
    manaedjî les bouyes d' eprimaedje.
    Si vos eployîz KDE come sicribanne vos avoz on boton «panike», et ene imådjete sol sicribanne, avou l' tecse «DJOKER l' eprimaedje!», ki va djoker sol moumint totes les bouyes d' eprimaedje cwand vos l' clitchîz. Çouchal pout esse ahessåve si li scrirece a des problemes avou l' papî.

en: You can configure each parameter of the module here.
target: Vos ploz apontyî tchaeconk des parametes do module chal.

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
target: Vos ploz copyî l' apontiaedje del sicrirece ki vos avoz fwait pol caweye %s pol caweye %s, li cene en alaedje pol moumint. Totes les dnêyes d' apontiaedje (no del sicrirece, discrijhaedje, eplaeçmint, sôre di raloyaedje, eyet prémetowes tchuzes) vont esse sipotcheyes pa les cis ki vos copeyroz, mins les bouyes k' atindèt po rexhe ni vont nén esse candjeyes di caweye.
    Totes les caweyes ni polèt nén esse transferêyes di cisse manire påzès råjhons ki shuvèt:

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp.
    Have a look at /etc/services for information.
target: Vos ploz dner diferins limeros di pôrt. 
    Des egzimpes valides sont: 139/tcp 139/udp.
    Loukîz l' fitchî /etc/services po pus d' informåcions.

en: You can export using NFS or Samba. Please select which you'd like to use.
target: Vos ploz fé on pårtaedje avou NFS ou Samba. Li kék voloz vs?

en: You can now partition %s.
    When you are done, don't forget to save using `w'
target: Asteure vos poloz pårti vosse deure plake %s
    Cwand vos åroz fini, ni rovyîz nén di schaper avou «w»

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
target: Vos ploz mete directumint li hårdêye del sicrirece. Li hårdêye doet shure les specificåcions di CUPS ou di Foomatic. Notez ki totes les sôres di hårdêyes ni sont nén sopoirtêyes pa totes les caweyes di scrireces.

en: You can't create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
target: Vos n' poloz nén fé di novele pårticion
    (ca vos avoz arivé å macsimom di pårticions primaires possibe).
    I vs fåt d' aprume oister ene pårticion primaire eyet ndè fé ene sitindowe.

en: You can't install the bootloader on a %s partition
target: Vos n' poloz nén astaler l' enondrece so ene pårticion %s

en: You can't select this package as there is not enough space left to install it
target: Vos n' poloz tchoezi ci pacaedje chal ca gn a nén del plaece assez ki po l' astaler

en: You can't select/unselect this package
target: Vos n' poloz nén tchoezi/distchoezi ci pacaedje chal

en: You can't unselect this package. It is already installed
target: Vos n' poloz nén distchoezi ci pacaedje chal. Il est ddja astalé

en: You can't unselect this package. It must be upgraded
target: Vos n' poloz nén distchoezi ci pacaedje chal. I l' fåt mete a djoû

en: You can't use JFS for partitions smaller than 16MB
target: Vos n' poloz eployî JFS po des pårticions di moens di 32Mo

en: You can't use ReiserFS for partitions smaller than 32MB
target: Vos n' poloz eployî ReiserFS po des pårticions di moens di 32Mo

en: You can't use a LVM Logical Volume for mount point %s
target: Vos n' poloz nén on volume lodjike LVM pol pont di montaedje %s

en: You can't use an encrypted file system for mount point %s
target: Vos n' poloz eployî on sistinme di fitchîs ecripté pol pont di montaedje %s

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
target: Vos avoz tchoezi d' astaler l' enondrece so ene pårticion.
    Çoula vout dire ki vos avoz ddja ene enondrece sol secteu d' enondaedje del deure plake (eg: System Commander).
    
    So kéne deure plake ki l' copiutrece s' enonde?

en: You don't have a swap partition.
    
    Continue anyway?
target: Vos n' avoz nole pårticion di swap
    
    Voloz vs vormint continuwer?

en: You don't have an Internet connection.
    Create one first by clicking on 'Configure'
target: Vos n' avoz nou raloyaedje al rantoele daegnrece.
    Po endè fé onk clitchîz so «Apontyî»

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
target: Vos n' avoz nole eterface d' apontieye.
    I vos fåt end apontyî ene, clitchîz so «Apontyî»

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
target: Vos avoz on trô dvins vosse tåvlea di pårtixhaedje, mins dji n' pout nén l' eployî.
    Li seule solucion c' est di bodjî vos mwaissès pårticions po-z aveur li trô a costé des pårticions stindowes

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
target: Vos avoz apontyî diferinnes manires di s' raloyî al rantoele daegnrece.
    Tchoezixhoz li cene ki vos vloz eployî.

en: You have more than one hard drive, which one do you install linux on?
target: Vos avoz pus d' ene deure plake, sol kéne voloz vs astaler Linux?

en: You have not configured X. Are you sure you really want this?
target: Vos n' avoz nén apontyî X11 (li sistinme di håynaedje grafike).
    Estoz vs seur di voleur çoula?

en: You have one big MicroSoft Windows partition.
    I suggest you first resize that partition
    (click on it, then click on "Resize")
target: Vos avoz ene grande pårticion Windows.
    Dji vos propoze, d' aprume, di l' raptiti
    (clitchîz sol pårticion, et poy so «Candjî di grandeu»)

en: You have selected the following server(s): %s
    
    
    These servers are activated by default. They don't have any known security
    issues, but some new ones could be found. In that case, you must make sure
    to upgrade as soon as possible.
    
    
    Do you really want to install these servers?
target: Vos avoz tchoezi le(s) sierveu(s) shuvant(s): %s
    
    
    Ces sierveus sront activés a l' enondaedje del éndjole. I n' ont nén
    di probleme di såvrité cnoxhou, mins i s' pôreut k' onk soeye trové el futeur.
    Dins ç' cas, vos dvroz a tot côp mete a djoû li pacaedje po esse a houte
    des problemes.
    
    
    Voloz vs vormint astaler ces sierveus?

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
target: Vos avoz fwait on transfer di vosse viye prémetowe sicrirece («%s»), El voloz vs mete ossu come prémetowe sicrirece pol novea sistinme d' eprimaedje %s?

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
target: Vos n' avoz tchoezi nou groupe di pacaedjes
    Tchoezixhoz li sôre d' astalåcion minimom ki vos vloz

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
target: Vos alez dveur candjî vosse éndjin d' enondaedje (boot-device) dins
    vosse Open Firmware, po vos poleur mete en alaedje l' enondeu.
    Tchoûkîz e minme tins so les tapes Comande-Option-O-F å moumint
    di l' enondaedje, et poy tapez:
        setenv boot-device %s,\\:tbxi
    et poy tapez: shut-down
    A l' enondaedje shuvant del copiutrece vos dvrîz voere li prompt di l' enondeu.

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
target: Vos ploz asteure diner les tchuzes pol module %s.
    Notez ki tote adresse doet esse dinêye e hecsa avou l' betchete 0x, eg: «0x123»

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
target: Asteure, vos poloz dner les tchuzes pol module %s.
    Les tchuzes si scrijhèt: « no=valixhance no2=valixhance2... »
    Metans: « io=0x300 irq=7... »

en: You must also format %s
target: Vos dvoz abwesner eto %s

en: You must be root to read configuration file.
target: Vos dvoz esse root po pleur lére li fitchî d' apontiaedje.

en: You must choose an image file first!
target: Vos dvoz d' aprume tchoezi on fitchî imådje!

en: You must choose/enter a printer/device!
target: Vos dvoz tchoezi/dner ene sicrirece/on éndjin!

en: You must enter a device or file name!
target: Vos dvoz taper on no d' éndjin ou d' fitchî!

en: You must enter a host name or an IP address.
target: Vos dvoz dner on no d' lodjoe ou ene adresse IP.

en: You must have a FAT partition mounted in /boot/efi
target: Vos dvoz aveur ene pårticion FAT montêye so /boot/efi

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
target: Vos dvoz aveur ene pårticion raecene.
    Po çoula, fijhoz ene pårticion (ou clitchîz so ene ki egzistêye dedja).
    Et poy tchoezixhoz «Pont di montaedje» et metoz lu come «/»

en: You must specify a kernel image
target: Vos dvoz specifyî ene imådje di nawea

en: You must specify a root partition
target: Vos dvoz dner ene pårticion raecene

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
target: I vos fåt on vraiy sistinme di fitchîs (ext2/ext3, reiserfs, xfs, ou jfs) po ci pont di montaedje chal

en: You need the Alcatel microcode.
    Download it at:
    %s
    and copy the mgmt.o in /usr/share/speedtouch
target: Vos avoz mezåjhe do microcôde d' alcatel
    Prindoz l' di
    %s
    et s' copyîz l' fitchî mgmt.o e /usr/share/speedtouch

en: You need the Alcatel microcode.
    You can provide it now via a floppy or your windows partition,
    or skip and do it later.
target: I gn a mezåjhe do firmware d' Alcatel po fé roter l' éndjin.
    Vos l' ploz dner do côp avou ene plakete, el cweri dins
    l' pårticion Windowsn, ou co passer houte et l' leyî po pus tård.

en: You need to log out and back in again for changes to take effect
target: Vos vs divoz dislodjî eyet relodjî po les candjmints esse efectifs

en: You need to reboot for the partition table modifications to take place
target: Vos dvoz renonder voste éndjole po vosse tåvlea di pårtixhaedje candjî

en: You now have the opportunity to download updated packages. These packages
    have been updated after the distribution was released. They may
    contain security or bug fixes.
    
    To download these packages, you will need to have a working Internet 
    connection.
    
    Do you want to install the updates ?
target: Vos avoz l' possibilité d' aberweter les pacaedjes k' on stî metous
    a djoû dispoy li fijhaedje del distribucion.
    I pôrént coridjî des bugs ou des problinmes di såvrité.
    
    Po ls aberweter, vos dvoz aveur on raloyaedje al daegntoele ki rote.
    
    Voloz vs astaler les pacaedjes metous a djoû?

en: You will now set up your Internet/network connection. If you wish to
    connect your computer to the Internet or to a local network, click "%s".
    Mandrake Linux will attempt to autodetect network devices and modems. If
    this detection fails, uncheck the "%s" box. You may also choose not to
    configure the network, or to do it later, in which case clicking the "%s"
    button will take you to the next step.
    
    When configuring your network, the available connections options are:
    traditional modem, ISDN modem, ADSL connection, cable modem, and finally a
    simple LAN connection (Ethernet).
    
    We will not detail each configuration option - just make sure that you have
    all the parameters, such as IP address, default gateway, DNS servers, etc.
    from your Internet Service Provider or system administrator.
    
    You can consult the ``Starter Guide'' chapter about Internet connections
    for details about the configuration, or simply wait until your system is
    installed and use the program described there to configure your connection.
target: Asteure vos ploz apontyî li raloyaedje åzès rantoeles. Si vos vloz raloyî
    li copiutrece da vosse al daegntoele oudonbén a ene rantoele locåle,
    clitchîz so «%s» s' i vs plait. Mandrake Linux va sayî di detecter
    otomaticmint les eterfaces rantoele eyet les modems. Si cisse deteccion
    fwait berwete, disclitchîz li boesse «%s».
    Vos ploz eto tchoezi di n' nén apontyî l' rantoele, ou del fé pus tård,
    dins ç' cas clitchîz so «%s» po passer a l' etape shuvante.
    
    Cwand vos apontyîz vosse rantoele, les sôres di raloyaedje k' i gn a
    sont: pa modem, cåte RDIS (ISDN), raloyaedje ADSL, modem cåbe, et po fini
    on simpe raloyaedje al rantoele locåle (avou ene cåte rantoele).
    
    Chal on n' denrè nén les detays po tchaeskene di ces tchuzes. Verifyîz
    seulmint ki vs avoz bén tos les parametes et racsegnmints di voste ahesseu
    al daegntoele, ou di vosse administrateu sistinme: adresses IP, prémetowe
    pasrele, sierveus DNS, evnd.
    
    Vos ploz loukî li tchaptrea do manuel so les raloyaedjes al daegntoele po
    pus di detays so l' apontiaedje, ou simplumint ratinde kel sistinme da
    vosse soeye astalé eyet eployî li programe k' î est discrît po-z
    apontyî vosse raloyaedje.

en: You will receive an alert if one of the selected services is no longer running
target: Vos rçuroz ene abranle si onk des tchoezis siervices si djoke di roter

en: You will receive an alert if the load is higher than this value
target: Vos rçuroz ene abranle si l' tchedje est pus hôte kel valixhance dinêye chal

en: You'll need to reboot before the modification can take place
target: Vos dvoz renonder voste éndjole po les candjmints esse metous en alaedje

en: You've not selected any font
target: Vos n' avoz tchoezi nole fonte

en: You've selected a software RAID partition as root (/).
    No bootloader is able to handle this without a /boot partition.
    Please be sure to add a /boot partition
target: Vos avoz tchoezi ene pårticion RAID e cotuzreye pol pårticion raecene (/).
    Nole enondrece pout manaedjî çoula sins ene pårticion /boot.
    Adon pinsez a radjouter ene pårticion /boot

en: Your %s has been configured.
    You may now scan documents using "XSane" from Multimedia/Graphics in the applications menu.
target: Vosse %s a stî apontieye.
    Vos ploz asteure sicaner des documints avou «XSane» a pårti di l' intrêye «Multimedia/Grafikes» do menu des programes.

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.
target: Vosse pårticion Windows est trop fragmintêye, i fåreut eployî «defrag»

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Vosse cåte pout aveur del acceleråcion 3D seulmint avou XFree %s.
    ASTEME: CI SOPOIRT EST CO ESPERIMENTÅ ET POUT DJALER VOSSE COPIUTRECE.
    Vosse cåte est sopoirtêye pa XFree %s ki pout aveur on meyeu sopoirt pol 2D.

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Vosse cåte pout aveur del acceleråcion 3D seulmint avou XFree %s.
    Vosse cåte est sopoirtêye pa XFree %s ki pout aveur on meyeu sopoirt pol 2D.

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
target: Vos ploz eployî l' acceleråcion 3D di vosse cåte videyo avou XFree86 %s,
    ASTEME: CI SOPOIRT EST CO ESPERIMENTÅ ET POUT DJALER VOSSE COPIUTRECE.

en: Your card can have 3D hardware acceleration support with XFree %s.
target: Vos ploz eployî l' acceleråcion 3D di vosse cåte videyo avou XFree %s.

en: Your choice of preferred language will affect the language of the
    documentation, the installer and the system in general. Select first the
    region you are located in, and then the language you speak.
    
    Clicking on the "%s" button will allow you to select other languages to
    be installed on your workstation, thereby installing the language-specific
    files for system documentation and applications. For example, if you will
    host users from Spain on your machine, select English as the default
    language in the tree view and "%s" in the Advanced section.
    
    Note that you're not limited to choosing a single additional language. You
    may choose several ones, or even install them all by selecting the "%s"
    box. Selecting support for a language means translations, fonts, spell
    checkers, etc. for that language will be installed. Additionally, the
    "%s" checkbox allows you to force the system to use unicode (UTF-8). Note
    however that this is an experimental feature. If you select different
    languages requiring different encoding the unicode support will be
    installed anyway.
    
    To switch between the various languages installed on the system, you can
    launch the "/usr/sbin/localedrake" command as "root" to change the
    language used by the entire system. Running the command as a regular user
    will only change the language settings for that particular user.
target: Tchoezixhoz l' lingaedje ki vos vloz eployî po l' astalaedje et come prémetou lingaedje do sistinme. Ci srè l' lingaedje eployî pol documintåcion, l' astalaedje, eyet l' sistinme e djenerå.
    Les lingaedjes sont rgroupés pa grandès redjons del Daegn po-z aveur des rîlêyes di lingaedjes pus coûtes.
    
    Si vos clitchîz so «%s» vos pôroz tchoezi d' aveur do sopoirt po ds ôtes lingaedjes avou. Cwand vos tchoezixhoz on ôte lingaedje les fitchîs specifikes po ci lingaedje la (ratournaedjes, aidance, documintåcions, coridjreces,...) sront astalés. Par egzimpe, si vos alez aveur so voste éndjole on uzeu ki vént del Sipagne, clitchîz sol sitoele boesse a clitchî ki mostere «%s» dins l' djivêye.
    
    Notez ki vos ploz astaler li sopoirt po bråmint des lingaedjes et nén 
    seulmint onk. Si vos les vloz tos (tos les cis sopoirtés pol moumint, come 
    di djusse), clitchîz sol sitoele «%s». Cisse tchuze la 
    est ahessåve po ene éndjole ki srè eployeye pa des djins di tolminme ké 
    payis. Dimander l' sopoirt po on lingaedje ça vout dire ki les fontes,
    les ratournaedjes, les coridjreces, evnd. po ç' lingaedje la sront astalés.
    Di pus, li boesse «%s» vos permete di foircî
    l' sistinme a-z eployî unicôde (UTF-8). Si vos tchoezixhoz des lingaedjes
    diferins k' ont mezåjhe d' ecôdaedjes diferins, l' ecôdaedje unicôde
    srè-st eployî di totes manires.
    
    On côp ki vos avoz tchoezi les locåles ki vos vloz, clitchîz so «Shuvant» po passer a l' etape shuvante.
    Po candjî d' on lingaedje a l' ôte sol sistinme on côp astalé, vos ploz enonder li comande «/usr/sbin/localedrake» come uzeu «root» po candjî li prémetou lingaedje do sistinme; ou l' enonder come èn uzeu normå po candjî les preferinces di lingaedje po cist uzeu la.

en: Your choice? (0/1, default `%s')
target: Vosse tchuze? (0/1, prémetowe %s)

en: Your choice? (default %s)
target: Vosse tchuze? (prémetowe %s)

en: Your choice? (default `%s'%s)
target: Vosse tchuze? (prémetowe «%s»%s)

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
target: I shonne ki vosse cåte grafike a ene prijhe TV-OUT.
    Ele pout esse apontieye po-z aveur li rexhowe do frame-buffer evoyeye so on posse TV.
    
    Po çoula vos dvoz raloyî vosse cåte grafike a vosse posse TV divant d' enonder li copiutrece.
    Adonpu, tchoezixhoz l' intrêye «TVout» dins l' menu del enondrece
    
    Voloz vs sopoirter cisse possibilité?

en: Your modem isn't supported by the system.
    Take a look at http://www.linmodems.org
target: Li modem da vosse n' est nén sopoirté på sistinme.
    Loukîz sol waibe http://www.linmodems.org/

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
target: L' éndjin multi-fonccions da vosse a stî apontyî otomaticmint po pleur fé des scanaedjes. Asteure vos ploz scaner e roye di comande avou «scanimage» («scanimage -d hp:%s» si vos vloz specifyî li scanrece cwand vos nd avoz pus d' ene), oudonbén avou les eterfaces grafikes «xscanimage» ou «xsane». Si vos eployîz li GIMP, vos ploz ossu scaner tot tchoezixhant li boune intrêye el menu «/Fitchî/Acweri». Tapez ossu «man scanimage» el roye di cmande si vos vloz pus di racsegnes.
    
    N' eployîz nén «scannerdrake» po cist éndjin chal!

en: Your personal phone number
target: Li limero di telefone da vosse

en: Your printer model
target: Li modele di vosse sicrirece

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
target: Vosse sicrirece a stî apontieye otomaticmint po vs diner accès ås léjheus di cåtes foto di vosse copiutrece. Asteure vos ploz aveur accès a vos cåtes foto avou l' programe grafike «MtoolsFM» (Menu: «Programes» -> «Usteyes po fitchîs» -> «Manaedjeu di fitchîs MTools») oudonbén sol roye di comande avou «mtools» (fijhoz «man mtools» po pus di racsegnes). Vos trovroz les fitchîs del cåte foto dizo l' lete di léjheu «P:» ou shuvantes si vos avoz pus d' ene sicrirece HP avou des léjheus di cåtes foto. Dins «MtoolsFM» vos ploz candjî inte les letes di léjheu avou l' tchamp k' est dins l' coine al copete et a droete dins les djivêyes di fitchîs.

en: Your scanner(s) will not be available on the network.
target: Vos scanrece(s) ni sront nén disponibes sol rantoele.

en: Your system does not have enough space left for installation or upgrade (%d > %d)
target: I gn a pus del plaece assez so vosse sistinme po-z astaler ou mete a djoû (%d > %d)

en: Your system is low on resources. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
target: Vosse sistinme a po di rsources. Vos pôrîz aveur des rujhes po
    l' astalåcion di Mandrake Linux. Si çoula arive, vos ploz sayî ene
    astalåcion e môde tecse. Po çoula, tchoûkîz sol tape «F1» a l' enondaedje
    et poy tapez «text».

en: Your system supports multiple head configuration.
    What do you want to do?
target: Li sistinme da vosse sopoite d' eployî pus d' ene
    waitroûle e minme tins.
    Cwè voloz vs fé?

en: Yugoslavian (latin)
target: Yugoslave (latene)

en: Zambia
target: Zambeye

en: Zeroconf Host name
target: No do lodjoe Zero-apontiaedje

en: Zeroconf host name must not contain a .
target: Li no d' lodjoe po zeroconf doet aveur on pont (.)

en: Zimbabwe
target: Zimbabwè

en: Zip
target: Plakete ZIP

en: [--file=myfile] [--word=myword] [--explain=regexp] [--alert]
target: [--file=fitchî] [--word=mot] [--explain=regexp] [--alert]

en: [--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]
target: [--manual] [--device=éndjin] [--update-sane=ridant_sourd_sane] [--update-usbtable] [--dynamic=éndjin]

en: [OPTIONS]
    Network & Internet connection and monitoring application
    
    --defaultintf interface : show this interface by default
    --connect : connect to internet if not already connected
    --disconnect : disconnect to internet if already connected
    --force : used with (dis)connect : force (dis)connection.
    --status : returns 1 if connected 0 otherwise, then exit.
    --quiet : don't be interactive. To be used with (dis)connect.
target: [TCHUZES]
    Programet di raloyaedje et di corwaitaedje do raloyaedje rantoele
    
    --defaultintf <eterface> : mostere ciste eterface come li prémetowe 
    --connect : si raloye al daegntoele si c' est nén co ddja fwait
    --disconnect : si disraloye del daegntoele si ddja raloyî
    --force : eployî avou --(dis)connect po foircî l' (dis)raloyaedje.
    --status : ritoûne li valixhance «1» si raloyî, «0» ôtrumint, et poy finixhe.
    --quiet : môde nén eteractif. Po-z eployî avou --(dis)connect.

en: [OPTIONS] [PROGRAM_NAME]
    
    OPTIONS:
      --help            - print this help message.
      --report          - program should be one of mandrake tools
      --incident        - program should be one of mandrake tools
target: [TCHUZES] [NO_DO_PROGRAME]
    
    TCHUZES:
      --help            - mostere ci messaedje d' aidance chal.
      --report          - li programe doet esse ene des usteyes di mandrake
      --incident        - li programe doet esse ene des usteyes di mandrake

en: [OPTION]...
      --no-confirmation      don't ask first confirmation question in MandrakeUpdate mode
      --no-verify-rpm        don't verify packages signatures
      --changelog-first      display changelog before filelist in the description window
      --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found
target: [TCHUZES]...
      --no-confirmation      èn nén dmander d' aveurixhaedje e môde MandrakeUpdate
      --no-verify-rpm        èn nén verifyî les sinateures des pacaedjes rpm
      --changelog-first      håyner li djournå des candjmints divant l' djivêye des fitchîs e purnea
      --merge-all-rpmnew     propôze di fonde tos les fitchîs .rpmnew/.rpmsave di trovés

en: [keyboard]
target: [taprece]

en: _: load here is a noun, the load of the system
    Load
target: Tchedje

en: a number
target: on limero

en: access to X programs
target: accès ås programes grafikes

en: access to administrative files
target: accès ås fitchîs administratifs

en: access to compilation tools
target: accès ås usteyes di copilaedje

en: access to network tools
target: accès ås usteyes rantoele

en: access to rpm tools
target: accès ås usteyes rpm

en: activated
target: metou en alaedje

en: alert configuration
target: apontiaedje del abranle

en: allow "su"
target: permete d' eployî «su»

en: and %d unknown printers
target: eyet %d scrireces nén cnoxhowes sont

en: and one unknown printer
target: eyet ene sicrirece nén cnoxhowe sont

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
target: apmd sieve a shure l' estat del batreye et a scrire les racsegnmints avou syslog.
    I pout eto siervi a clôre l' éndjole cwand c' est ki les batreyes divnèt flåwes.

en: authentication
target: otintifiaedje

en: average
target: moyene

en: browse
target: foyter

en: burner
target: broûleu

en: busmouse
target: sori bus

en: but not matching
target: mins nerén sins

en: cable connection detected
target: Raloyaedje viè cåbe TV detecté

en: choose device
target: tchoezixhoz on éndjin

en: choose image
target: tchoezixhoz ene imådje

en: choose image file
target: tchoezixhoz on fitchî imådje

en: chunk size
target: grandeu des bokets

en: class of hardware device
target: li classe d' éndjolreye di l' éndjin

en: click here if you are sure.
target: clitchîz chal si vs estoz seur.

en: comma separated numbers
target: limeros separés pa des comas

en: comma separated strings
target: tchinnes separêyes pa des comas

en: commands before booting, or 'c' for a command-line.
target: les comandes avant d' enonder, ou so 'c' po-z aveur ene roye di comande.

en: compact
target: compak

en: connecting to %s ...
target: raloyaedje a %s ...

en: consolehelper missing
target: i gn a nou consolehelper

en: could not find any font in your mounted partitions
target: dji n' a trové nole fonte so vos montêyès pårticions

en: could not find any font.
target: dji n' a trové nole fonte.

en: cpu #
target: processeu l°

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
target: cron est on programe sitandård po Unix.  Il enonde des programes tchoezis
    pa l' uzeu a des moumints metous pa l' uzeu.  Li cron da Vixie radjoute sacwants
    siervice å programe cron tradicionél di Unix, par egzimpe ene meyeuse såvrité
    eyet des pus ritchès tchuzes po l' apontiaedje.

en: custom
target: a vosse môde

en: daily
target: tos les djoûs

en: default
target: prémetou

en: detected
target: detecté

en: detected %s
target: %s detecté

en: detected on port %s
target: detecté sol pôrt %s

en: device
target: éndjin

en: dhcpd Config...
target: Apontiaedje di dhcpd...

en: dhcpd Server Configuration
target: Apontiaedje do sierveu dhcpd

en: disable
target: dismete

en: disabled
target: dismetou

en: dismiss
target: passer houte

en: done
target: fwait

en: drakTermServ Overview
target: Djenerålités so drakTermServ

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
target: Apontieu di côpe feu drakfirewall
    
    Acertinez vs ki vos avoz bén apontyî vosse rantoele eyet l' accès al
    daegntoele avou drakconnet divant d' aler pus lon.

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
target: Apontiaedje do côpe feu drakefirewall
    
    Çouci apontieye on côpe feu personel (dj' ô bén, po esse eployî sor on
    posse éndjolrece) po ciste éndjole Mandrake Linux chal.
    Po ene poujhante solucion di côpe feu, loukîz purade do costé
    del distribucion MandrakeSecurity avou on côpe feu di hôte såvrité.

en: early pentiums were buggy and freezed when decoding the F00F bytecode
target: les prumîs pentiums avént-st on bug ki les fjheut edjaler å moumint di discôder l' comande F00F

en: enable
target: mete en alaedje

en: enable radio support
target: mete en alaedje li sopoirt pol radio

en: error unmounting %s: %s
target: aroke tot montant %s: %s

en: ethernet card(s) detected
target: cåte(s) rantoele detectêye(s)

en: family of the cpu (eg: 6 for i686 class)
target: famile do processeu (eg: 6 pol classe i686)

en: file list sent by FTP: %s
target: djivêye di fitchîs evoyeye pa FTP: %s

en: final resolution
target: finté finåle

en: first step creation
target: Fijhaedje del prumire etape

en: force
target: foirci

en: format of floppies supported by the drive
target: Sôre di plaketes ki sont-st acceptêyes på mineu

en: generate auto-install floppy
target: Fé li plakete d' astalaedje otomatike

en: generation of the cpu (eg: 8 for PentiumIII, ...)
target: djermêye do processeu (eg: 8 pol PentiumIII, ...)

en: hard disk model
target: Modele del deure plake

en: hd
target: deure plake

en: here if no.
target: chal ôtrumint.

en: high
target: hôte

en: hourly
target: totes les eures

en: if needed
target: s' i fåt

en: if set to yes, check additions/removals of suid root files.
target: si metou, verifeye les radjoutaedjes/oistaedjes di fitchîs suid root.

en: if set to yes, check empty password in /etc/shadow.
target: s' il est metou, i verifeye les vudes sicrets e fitchî /etc/shadow.

en: if set to yes, check files/directories writable by everybody.
target: s' il est metou, i cwire après des fitchîs/ridants ki tot l' minme kî pout scrire

en: if set to yes, check for :
    
    - empty passwords,
    
    - no password in /etc/shadow
    
    - for users with the 0 id other than root.
target: s' il est metou, i verifeye après:
    
    - des vudes sicrets,
    
    - des intrêyes sins scret dins /etc/shadow
    
    - des uzeus ôtes ki «root» k' ont on id ewal a 0.

en: if set to yes, check open ports.
target: s' il est metou, cweri après des pôrts di drovous.

en: if set to yes, report check result to syslog.
target: s' il est metou, li rapoirt do verifiaedje est evoyî sol djournå do sistinme (syslog).

en: if set to yes, report unowned files.
target: s' il est metou, rapoirter les fitchîs ki sont-st ôrfulins.

en: if set to yes, reports check result to tty.
target: s' il est metou, les rapoirts do verifiaedje sont-st evoyîs sol conzôle (tty).

en: if set to yes, run some checks against the rpm database.
target: s' il est metou, il enondrè sacwants verifiaedjes sol båze di dnêyes des pacaedjes rpm.

en: if set to yes, run the daily security checks.
target: s' il est metou, enonder les verifiaedjes di såvrité pa msec di tchaeke djoû.

en: if set to yes, verify checksum of the suid/sgid files.
target: s' il est metou, i verifeye li checksum des fitchîs suid/sgid.

en: if set, send the mail report to this email address else send it to root.
target: s' il est metou, emiler li rapoirt a ciste adresse ci, ôtmint l' evoyî a root.

en: ignore
target: passer houte

en: important
target: ki vént bén a pont

en: information level that can be obtained through the cpuid instruction
target: livea d' informåcion k' on pout aveur avou l' instruccion cpuid

en: kdesu missing
target: i gn a nou kdesu

en: level
target: livea

en: local config: %s
target: apontiaedje locå: %s

en: local config: false
target: apontiaedje locå: neni

en: local config: true
target: apontiaedje locå: oyi

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
target: lpd est li démon d' eprimaedje k' i gn en a mezåjhe po lpr poleur rexhe comufåt.
    C' est on sierveu ki manaedje les bouyes po les scrireces.

en: manual
target: Al mwin

en: maybe
target: ki vénreut co bén a pont

en: mkinitrd optional arguments
target: opcionelès tchuzes po mkinitrd

en: mkraid failed
target: mkraid n' a nén stî

en: mkraid failed (maybe raidtools are missing?)
target: mkraid n' a nén stî (motoit vos n' avoz nén les raidtools?)

en: monthly
target: tos les moes

en: mount failed:
target: li montaedje a fwait berwete:

en: mounting partition %s in directory %s failed
target: li montaedje del pårticion %s el ridant %s a fwait berwete

en: must have
target: k' i fåt d' tote foice avu

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
target: named (BIND) est on sierveu di nos d' dominne (DNS) eployî po-z aveur les adresses IP limerikes a pårti des nos des lodjoes.

en: network printer port
target: pôrt del sicrirece rantoele

en: new
target: novea

en: new dynamic device name generated by core kernel devfs
target: novea éndjin dinamike, askepyî otomaticmint pal sopoirt «devfs» do nawea

en: nice
target: plaijhi a-z avu

en: no
target: neni

en: no fonts found
target: nole fonte di trovêye

en: none
target: nouk

en: not configured
target: nén apontyî

en: not enough room in /boot
target: i gn a nén del plaece assez so /boot

en: number of capture buffers for mmap'ed capture
target: nombe di tampons po les copeyes di waitroûlêyes avou mmap()

en: official vendor name of the cpu
target: No oficir do vindeu do processeu

en: old static device name used in dev package
target: vî éndjin statike eployî pal pacaedje «dev»

en: omit raid modules
target: sins les modules raid

en: omit scsi modules
target: sins les modules SCSI

en: on channel %d id %d
target: sol canå %d id %d

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
target: i gn a mezåjhe do pacaedje «ImageMagick» po k' ça rote comufåt.
    Clitchîz so «'l est bon» po-z astaler «ImageMagick» ou so «Rinoncî» po cwiter

en: paranoid
target: paranoyide

en: parse all fonts
target: analijhî totes les fontes

en: partition %s
target: pårticion %s

en: partition %s is now known as %s
target: li pårticion %s est asteure kinoxhowe come %s

en: please wait during ttmkfdir...
target: tårdjîz s' i vs plait, dj' enonde ttmkfdir...

en: please wait, parsing file: %s
target: tårdjîz s' i vs plait, dji lé l' fitchî: %s

en: primary
target: prumî

en: received
target: riçuvou(s)

en: received:
target: riçuvou(s):

en: reconfigure
target: rapontyî

en: replay
target: Rifé

en: restrict
target: rastrinde

en: running
target: en alaedje

en: saving Bootsplash theme...
target: dji schape li tinme d' enondaedje del éndjole...

en: search
target: cweri

en: secondary
target: deujhinme

en: select path to restore (instead of /)
target: tchoezi li tchminw wice copyî les fitchîz rapexhîs (el plaece di « / »)

en: sent:
target: evoyî(s):

en: serial
target: séreye

en: server
target: sierveu

en: service setting
target: apontiaedje des siervices

en: simple
target: simpe

en: size of the (second level) cpu cache
target: grandeu del muchete (di deujhinme livea) do cpu

en: special capacities of the driver (burning ability and or DVD support)
target: Capacités speciåles do mineu (possibilité di fé do broûleu di plakes lazer oudonbén sopoirt po les DVD)

en: stopped
target: djoké

en: sub generation of the cpu
target: sor-djermêye do processeu

en: tape
target: binde

en: text box height
target: hôteu del boesse di tecse

en: text width
target: lårdjeu do tecse

en: the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)
target: Li frécwénce do processeu, e MHz (Mega hertz, çou ki polèt esse defini a pô près come li nombe d' instruccions ki l' processeu pout fé so ene segonde)

en: the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to "benchmark" the cpu.
target: Li nawea Linux a mezåjhe di fé ene blouke di carculaedje å moumint di l' enondaedje po poleur defini li conteu do «timer». Li rezultat est metou come «bogomips», c' est ene manire d' aveur ene idêye del roedeu do processeu.

en: the color of the progress bar
target: li coleur del bår d' avançmint

en: the height of the progress bar
target: li hôteu del bår d' avançmint

en: the list of alternative drivers for this sound card
target: li djivêye des mineus alternatifs po cisse cåte son chal

en: the module of the GNU/Linux kernel that handles the device
target: li module do nawea GNU/Linux ki manaedje cist éndjin chal

en: the name of the CPU
target: li no do processeu

en: the number of buttons the mouse has
target: li nombe di botons del sori

en: the number of the processor
target: li limero do processeu

en: the progress bar x coordinate
    of its upper left corner
target: cowordonêyes X del coine a hintche
    et å dzeu del bår d' avançmint

en: the progress bar y coordinate
    of its upper left corner
target: cowordonêyes Y del coine a hintche
    et å dzeu del bår d' avançmint

en: the type of bus on which the mouse is connected
target: Li sôre do bus ki l' sori est raloyeye dizo

en: the vendor name of the device
target: li no do vindeu di l' éndjin

en: the vendor name of the processor
target: li no do vindeu do processeu

en: the width of the progress bar
target: li lårdjeu del bår d' avançmint

en: this field describes the device
target: ci tchamp chal c' est pol discrijhaedje di l' éndjin

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
target: çouchal c' est li bus fizike ki les éndjins sont tchôkîs dvins (eg: PCI, USB, ...)

en: transmitted
target: evoyî(s)

en: type1inst building
target: enondaedje di type1inst

en: type: %s
target: sôre: %s

en: type: fat
target: sôre: lådje

en: type: thin
target: sôre: sitroet

en: unknown
target: nén cnoxhou

en: use dhcp
target: eployî dhcp

en: use pppoe
target: eployî pppoe

en: use pptp
target: eployî pptp

en: very nice
target: mo plaijhi a-z avu

en: weekly
target: totes les samwinnes

en: when checked, owner and group won't be changed
target: s' il est clitchî, li prôpietaire et l' groupe èn polèt nén esse candjîs

en: whether this cpu has the Cyrix 6x86 Coma bug
target: si ç' processeu chal a l' bug di coma des Cyrix 6x86 ou nén

en: with /usr
target: avou /usr

en: x coordinate of text box
    in number of characters
target: cowordonêyes X (e caracteres)
    pol boesse di tecse

en: xfs restart
target: renondaedje di xfs

en: y coordinate of text box
    in number of characters
target: cowordonêyes Y (e caracteres)
    pol boesse di tecse

en: yes
target: oyi

en: yes means the arithmetic coprocessor has an exception vector attached
target: «oyi» vout dire ki l' coprocesseu aritmetike a-st on vecteur d' egzepcions

en: yes means the processor has an arithmetic coprocessor
target: «oyi» vout dire ki l' processeu a-st on coprocesseu aritmetike
