DrakX-mt - en to unknown language translation catalogue (2254 entries)

en: 		 user name: %s
    		 on path: %s
target: 		 isem ta' user: %s
    		 fuq direttorju: %s

en: 		Erase=%s
target: 		Ħassar=%s

en: 	-Hard drive.
target: 	-Ħard disk.

en: 	-Network by FTP.
target: 	-Network bl-FTP.

en: 	-Network by SSH.
target: 	-Network bl-SSH.

en: 	-Network by rsync.
target: 	-Network bl-rsync.

en: 	-Network by webdav.
target: 	-Network bil-WebDAV.

en: 	-Tape
target: 	-Tejp

en: 	Backups use tar and bzip2
target: 	Kopji tas-sigurtà jużaw tar u bzip2

en: 	Backups use tar and gzip
target: 	Kopji tas-sigurtà jużaw tar u gzip

en: 	Do not include System Files
target: 	Tinkludix fajls tas-sistema

en: 	Limit disk usage to %s MB
target: 	Illimita l-użu tad-diska għal %s MB

en: 	Use .backupignore files
target: 	Uża fajls .backupignore

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type "sndconfig" in a console.
target: 
    
    
    Nota: Jekk għandek kard tal-awdjo ISA PnP, trid tuża l-programm sndconfig. Sempliċiment ittajpja "sndconfig" fil-konsol.

en: 
    
     Thanks:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>
target: 
    
     Grazzi lil:
    	- Proġett LTSP http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
target: 
    
    (TWISSIJA! Int qed tuża XFS bħala l-partizzjoni root.
    Aktarx ma tistax toħloq bootdisk fuq flopi waħda 1.44MB,
    għax id-drajver tal-XFS huwa kbir ħafna).

en: 
    
    Enter a Zeroconf host name without any dot if you don't
    want to use the default host name.
target: 
    
    Daħħal isem ta' kompjuter Zeroconf mingħajr tikka jekk ma
    tridx tuża l-isem tal-kompjuter impliċitu.

en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
target: 
    
    Il-kard tiegħek tuża d-drajver %s"%s" (id-drajver impliċitu għall-kard tiegħekhuwa "%s").

en: 
                          DrakBackup Daemon Report
target: 
                        Rapport tad-daemon DrakBackup

en: 
                        DrakBackup Report Details
target: 
                     Dettalji tar-Rapport DrakBackup

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
target: 
     Problema fil-konnessjoni FTP. Ma kienx possibbli nibgħat il-fajls bl-FTP.

en: 
    - Burn to CD
target: 
    - Aħraq fuq CD

en: 
    - Delete hard drive tar files after backup.
target: 
    - Ħassar il-fajls tar minn fuq il-ħard disk wara l-kopja tas-sigurtà

en: 
    - Options:
target: 
    - Għażliet:

en: 
    - Other Files:
target: 
    - Fajls oħrajn:

en: 
    - Save on Hard drive on path: %s
target: 
    - Ikteb fuq ħard disk fid-direttorju: %s

en: 
    - Save to Tape on device: %s
target: 
    - Ikteb fuq tejp fuq l-apparat: %s

en: 
    - Save via %s on host: %s
target: 
    - Ikteb permezz ta' %s fuq kompjuter: %s

en: 
    - System Files:
target: 
    - Fajls tas-sistema:

en: 
    - User Files:
target: 
    - Fajls tal-user:

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
target: 
    Ukoll, printer ikkonfigurati bil-fajls PPD provduti mill-manufatturi jew bi drajvers CUPS nativi ma jistgħux jiġu trasferiti.

en: 
    Backup Sources:
target: 
    Sorsi tal-kopji tas-sigurtà:

en: 
    Chances are, this partition is
    a Driver partition. You should
    probably leave it alone.
target: 
    Aktarx, din il-partizzjoni
    hija partizzjoni ta' Driver,
    jaqbillek tħalliha kif inhi.

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
target: 
    Prosit! Il-printer tiegħek issa nstallat u konfigurat!
    
    Tista' tipprintja billi tuża l-kmand "Print" minn ġo l-programmi li tuża (ġeneralment taħt il-menu "Fajl" jew "File").
    
    Jekk tixtieq iżżid, tneħħi jew tibdel l-isem ta' printer, jew jekk tixtieq tbiddel is-setings impliċiti (daqs tal-karta, kwalità eċċ), agħżel "Printer" mis-sezzjoni "Ħardwer" taċ-Ċentru tal-Kontroll Mandrake.

en: 
    Drakbackup activities via %s:
target: 
    Attività Drakbackup permezz ta' %s:

en: 
    Drakbackup activities via CD:
target: 
    Attività Drakbackup permezz ta' CD:

en: 
    Drakbackup activities via tape:
target: 
    Attività Drakbackup permezz ta' tejp:

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
target: 
    Jekk il-kard hija ISA, il-valuri fuq l-iskrin li jmiss għandhom ikunu tajbin.
    
    Jekk hija kard PCMCIA, trid tkun taf l-IRQ u IO tal-kard.

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
target: 
    Immarka l-printers li trid tittrasferixxi u klikkja "Ittrasferixxi".

en: 
    Please check all options that you need.
target: 
    Jekk jogħġbok immarka l-għażliet kollha li għandek bżonn.

en: 
    Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.
target: 
    Il-printers li hemm fuq servers CUPS m'għandhomx bżonn jiġu ssettjati minn hawn; dawn il-printers jiġu magħrufa awtomatikament.

en: 
    Select the theme for
    lilo and bootsplash,
    you can choose
    them separately
target: 
    Agħżel tema għal
    lilo u bootsplash;
    tista' tagħżilhom
    separatament

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Il-kmandijiet "%s" u "%s" iħalluk ukoll tbiddel is-setings għal xogħol ta' printjar partikulari. Sempliċiment żid is-setings li trid fuq il-linja ta' kmand, eż "%s <file>".

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Il-kmand "%s" iħallik ukoll tbiddel is-setings għal xogħol ta' printjar partikulari. Sempliċiment żid is-setings li trid fuq il-linja ta' kmand, eż "%s <file>".

en: 
    There are %d unknown printers directly connected to your system
target: 
    Hemm %d printers mhux magħrufa imqabbda direttament mal-kompjuter

en: 
    There is one unknown printer directly connected to your system
target: 
    Hemm printer wieħed mhux magħruf imqabbad direttament mal-kompjuter

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
target: 
    Din il-partizzjoni speċjali
    "bootstrap" qegħda biex
    tagħżel OS meta tixgħel.

en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
target: 
    Twissija
    
    Jekk jogħġbok aqra sew it-termini ta' taħt. Jekk ma taqbilx ma xi parti,
    ma tistax tinstalla s-CD li jmiss. Agħfas "Ma naċċettax" biex tkompli 
    l-installazzjoni minngħajr dan is-CD.
    
    
    Xi komponenti tas-CD li jmiss ma jaqgħux taħt il-liċenzja GPL jew liċenzji
    simili. Kull komponent simili għalhekk huwa kontrollat mit-termini u
    kundizzjonijiet tal-liċenzja speċifika tiegħu. Jekk jogħġbok aqra sew
    u segwi dawn il-liċenzji speċifiċi qabel tuża jew tiddistribwixxi dawn il-
    komponenti.
    Dawn il-liċenzji ġeneralment jipprojbixxu t-trasferiment, ikkupjar (ħlief 
    bħala kopja tas-sigurtà), ridistribuzzjoni, "reverse engineering", diżassemblaġġ,
    dikompilazzjoni jew modifika ta' dawn il-komponenti. Ksur ta' dan
    il-qbil jittermina immedjatament id-drittijiet tiegħek taħt din il-liċenzja.
    Sakemm il-liċenzja ma tagħtikx dawn id-drittijiet, normalment ma tistax
    tinstalla dawn il-programmi fuq iżjed minn kompjuter wieħed, jew 
    tadattahom biex jintużaw fuq network. Jekk għandek xi dubju, jekk 
    jogħġbok ikkuntattja direttament lid-distributur jew editur tal-komponent.
    It-trasferiment lill terzi partijiet jew ikkupjar ta' dawn il-komponenti inkluż
    id-dokumentazzjoni normalment huwa miċħud.
    
    
    Id-drittijiet kollha tal-komponenti tas-CD li jmiss huma tal-awturi rispettivi u
    huma protetti minn liġijiet ta' propjetà intellettwali u copyright applikabbli
    għal programmi ta' softwer.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
target: 
    Merħba għas-saħħar tal-konfigurazzjoni tal-printer
    
    Dan is-saħħar iħallik tinstalla printers lokali jew remoti biex jintużaw minn dan il-kompjuter kif ukoll kompjuters oħra fuq in-network.
    
    Huwa jitolbok l-informazzjoni kollha meħtieġa biex tissettja l-printer u jagħtik aċċess għad-drajvers tal-printers kollha disponibbli, l-għażliet tad-drajver, u t-tipi ta' konnessjoni.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Merħba għas-saħħar tal-printers
    
    Dan is-saħħar jgħinek tinstalla printer(s) imqabbda direttament ma' dan il-kompjuter jew imqabbda direttament man-network.
    
    Jekk għandek printer(s) imqabbad direttament ma' dan il-kompjuter, jekk jogħġbok ixgħelu issa u ara li mqabbad sew, ħalli dan jingħaraf awtomatikament. Bl-istess mod, jekk għandek printers man-network,  dawn iridu jkunu mqabbdin u mixgħula.
    
    Innota li l-għarfien awtomatiku ta' printers fuq in-network idum iżjed mill-għarfien ta' printers imqabbda lokalment, għalhekk itfi l-għarfien awtomatiku ta' printers fuq in-network jekk taf li m'hemmx.
    
    Agħfas "Li jmiss" meta tlesti, jew "Ikkanċella" jekk ma tridx tissettja printers għalissa.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Merħba għas-saħħar tal-printers
    
    Dan is-saħħar jgħinek tinstalla printer(s) imqabbda direttament ma' dan il-kompjuter, imqabbda direttament man-network, jew imqabbda ma' kompjuters Windows remoti.
    
    Jekk għandek printer(s) imqabbad direttament ma' dan il-kompjuter, jekk jogħġbok ixgħelu issa u ara li mqabbad sew, ħalli dan jingħaraf awtomatikament. Bl-istess mod, jekk għandek printers man-network jew fuq kompjuters bil-Windows, dawn iridu jkunu mqabbdin u mixgħula.
    
    Innota li l-għarfien awtomatiku ta' printers fuq in-network idum iżjed mill-għarfien ta' printers imqabbda lokalment, għalhekk itfi l-għarfien awtomatiku ta' printers fuq in-network jew fuq Windows jekk taf li m'hemmx.
    
    Agħfas "Li jmiss" meta tlesti, jew "Ikkanċella" jekk ma tridx tissettja printers għalissa.

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
target: 
    Merħba.
    
    Il-parametri għall-awto-installazzjoni jinstabu fil-parti tax-xellug.

en:           All of your selected data have been
target:            L-informazzjoni kollha magħżula ġiet

en:           Successfuly Restored on %s
target:          restawrata għal fuq %s

en:          Restore Configuration
target:       Konfigurazzjoni ta' Restawr

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
target:   <Tab>/<Alt-Tab> bejn l-elementi  | <Space> jimmarka | <F12> skrin li jmiss

en:  (Default)
target:  (Impliċitu)

en:  (Make sure that all your printers are connected and turned on).
target:  (Aċċerta li l-printers kollha huma mqabbdin u mixgħula).

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target:  (portijiet paralleli: /dev/lp0, /dev/lp1 huma ekwivalenti għal LPT1, LPT2 eċċ. L-ewwel printer USB = /dev/usb/lp0, it-tieni printer USB = /dev/usb/lp1 eċċ )

en:  (driver %s)
target:  (drajver %s)

en:  (multi-session)
target:  (multi-sessjoni)

en:  Erase Now
target:  Ħassar issa

en:  Error while sending mail.
target:  Problema biex jintbagħat imejl.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
target:  Jekk il-printer meħtieġ instab awtomatikament, sempliċiment għażlu mil-lista u żid il-user, password u/jew workgroup jekk meħtieġa.

en:  enter `void' for void entry
target: daħħal "void" għal element vojt

en:  on
target:  fuq

en:  on LPD server "%s", printer "%s"
target:  fuq server LPD "%s", printer "%s"

en:  on Novell server "%s", printer "%s"
target:  fuq server Novell "%s", printer "%s"

en:  on SMB/Windows server "%s", share "%s"
target:  fuq server Windows "%s", share "%s"

en:  on device: %s
target:  fuq apparat: %s

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
target: !!! Jindika li l-password fid-database tas-sistema huwa differenti minn 
    dak fid-database tat-Server tat-Terminal.
    Ħassar u erġa' żid il-user mas-Server tat-Terminal biex tippermetti login.

en: "%s" is not a valid email!
target: "%s" mhux indirizz tal-imejl validu!

en: "%s": clicking on the "%s" button will open the printer configuration
    wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
    information on how to setup a new printer. The interface presented there is
    similar to the one used during installation.
target: "%s": jekk tagħfas il-buttuna "%s" jinfetaħ saħħar tal-konfigurazzjoni 
    tal-printer. Ikkonsulta l-kapitlu korrispondenti tal-iStarter Guide għal iżjed
    tagħrif dwar kif tissettja printer ġdid. L-interfaċċja preżentata hawn hija simili
    għal dik użata waqt l-installazzjoni.

en: "Menu" key
target: Buttuna "Menu"

en: %d comma separated numbers
target: %d numri separati b'virgoli

en: %d comma separated strings
target: %d strings separati b'virgoli

en: %d minutes
target: %d minuti

en: %d packages
target: %d pakketti

en: %d seconds
target: %d sekondi

en: %s BootSplash (%s) preview
target: Stampa tal-boot %s - previżjoni (%s)

en: %s already in use
target: %s diġà qed jintuża

en: %s cannot be displayed 
    . No Help entry of this type
target: %s ma jistax jintwera 
    . Ebda element ta' għajnuna ta' dan it-tip

en: %s exists, delete?
    
    Warning: If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
target: %s teżisti, tħassarha?
    
    Twissija: Jekk diġà għamilt dan il-proċess, aktarx tkun trid tneħħi
    dan iċ-ċifrarju minn "authorized_keys" fuq is-server.

en: %s formatting of %s failed
target: %s formattjar ta' %s falla

en: %s is not in the scanner database, configure it manually?
target: %s m'hux fid-database tal-iskaners; trid tikkonfigurah manwalment?

en: %s not found...
target: %s ma nstabx...

en: %s not responding
target: %s m'hux jirrispondi

en: %s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...
target: %s: %s jiħtieġ isem il-kompjuter, indirizz MAC, IP, nbi-image, 0/1 għal THIN_CLIENT, 0/1 għal konfigurazzjoni lokali...

en: %s: %s requires hostname...
target: %s: %s jiħtieġ isem il-kompjuter...

en: (Note: Parallel ports cannot be auto-detected)
target: (Nota: Ports paralleli ma jistgħux jingħarfu awtomatikament)

en: (This) DHCP Server IP
target: IP ta' dan is-server DHCP

en: (already added %s)
target: (%s diġà miżjud)

en: (module %s)
target: (modulu %s)

en: (on %s)
target: (fuq %s)

en: (on this machine)
target: (fuq dan il-kompjuter)

en: , %s sectors
target: , %s setturi

en: , TCP/IP host "%s", port %s
target: , server TCP/IP "%s", printer "%s"

en: , host "%s", port %s
target: , kompjuter "%s", port %s

en: , multi-function device
target: , apparat multi-funzjoni

en: , multi-function device on HP JetDirect
target: , apparat multi-funzjoni fuq HP JetDirect

en: , multi-function device on USB
target: , apparat multi-funzjoni fuq USB

en: , network printer "%s", port %s
target: , printer tan-network "%s", port %s

en: , printer "%s" on SMB/Windows server "%s"
target: , Printer "%s" fuq server SMB/Windows "%s"

en: , printer "%s" on server "%s"
target: , printer "%s" fuq server "%s"

en: , printing to %s
target: , qed jipprintja fuq %s

en: , using command %s
target: , bil-kmand %s

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
target: - apparat pci: dan jagħti s-slot PCI, apparat u funzjoni tal-kard.
    - apparat eide: l-apparat huwa "master" jew "slave"
    - apparat scsi: il-bus u id scsi.

en: /Autodetect _jazz drives
target: /Agħraf apparat _jazz awtomatikament

en: /Autodetect _printers
target: /Agħraf _printers awtomatikament

en: /File/-
target: /Fajl/-

en: /File/Save _As
target: /File/Ikteb b'isem _ġdid

en: /File/_New
target: /File/_Ġdid

en: /File/_Open
target: /File/_Iftaħ

en: /File/_Quit
target: /Fajl/O_ħroġ

en: /File/_Save
target: /File/I_kteb

en: /Help/_About...
target: /Għajnuna/_Dwar...

en: /Options/Test
target: /Għażliet/Test

en: /Set as _Default
target: /I_ssettja bħala Impliċitu

en: /_About...
target: /_Dwar...

en: /_Actions
target: /_Azzjonijiet

en: /_Add Printer
target: /_Żid Printer

en: /_Configure CUPS
target: /Ikkonfigura _CUPS

en: /_Delete
target: /_Ħassar

en: /_Edit
target: /_Editja

en: /_Expert mode
target: /Modalità _esperti

en: /_File
target: /_Fajl

en: /_Help
target: /_Għajnuna

en: /_Options
target: /Għa_żliet

en: /_Quit
target: /_Oħroġ

en: /_Refresh
target: /E_rġa' tella'

en: /_Report Bug
target: /I_rrapporta bug

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
target: /etc/hosts.allow u /etc/hosts.deny diġà konfigurati - mhux mibdula

en: 1 button
target: buttuna waħda

en: 1 minute
target: minuta

en: 16 million colors (24 bits)
target: 16 miljun kulur (24 bit)

en: 2 buttons
target: 2 buttuni

en: 256 colors (8 bits)
target: 256 kuluri (8 bit)

en: 3 buttons
target: 3 buttuni

en: 3 buttons with Wheel emulation
target: 3 buttuni b' emulazzjoni tar-rota

en: 32 thousand colors (15 bits)
target: 32 elf kulur (15 bit)

en: 4 billion colors (32 bits)
target: 4 biljun kulur (32 bit)

en: 64 MB or more
target: 64 MB jew iżjed

en: 65 thousand colors (16 bits)
target: 65 elf kulur (16 bit)

en: <- Previous
target: <- Ta' qabel

en: <-- Del User
target: <-- Ħassar user

en: <-- Delete
target: <-- Ħassar

en: <-- Edit Client
target: <- Editja klijent

en: => Notice, a label changed:
    %s
target: => Nota, l-isem inbidel:
    %s

en: => There are many things to choose from (%s).
target: => Hemm ħafna affarijiet minn xiex tagħżel (%s).

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
target: Bootdisk personalizzata tipprovdi mezz kif ittella' s-sistema Linux
    minngħajr ma' tiddependi fuq il-bootloader normali. Dan huwa utli jekk ma
    tixtieqx tinstalla LILO (jew grub) fuq is-sistema tiegħek, jew jekk xi sistema 
    operattiva oħra tneħħilek il-LILO, jew jekk LILO ma jaħdimx mal-ħardwer 
    tiegħek. Bootdisk personalizzata tista' wkoll tintuża mal-"image" tat-tiswija
    (rescue) ta' Mandrake, biex ikun iżjed faċli tirkupra minn problemi serji.
    Tixtieq toħloq bootdisk għas-sistema tiegħek?
    %s

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
target: Bootdisk personalizzata tipprovdi mezz kif ittella' s-sistema Linux
    minngħajr ma' tinstalla l-bootloader normali. Dan huwa utli jekk ma tixtieqx
    tinstalla SILO fuq is-sistema tiegħek, jew jekk xi programm ineħħilek
    is-SILO, jew jekk SILO ma jaħdimx mal-ħardwer tiegħek. Bootdisk personalizzata
    tista' wkoll tintuża mal-"image" tat-tiswija (rescue) ta' Mandrake, biex ikun
    iżjed faċli tirkupra minn problemi serji.
    
    Jekk tixtieq toħloq bootdisk għas-sistema tiegħek, daħħal flopi fl-ewwel 
    drajv u agħfas OK.

en: A graphical environment with user-friendly set of applications and desktop tools
target: Ambjent grafiku b' għażla ta' programmi u għodda faċli

en: A library which defends against buffer overflow and format string attacks.
target: Din hija librerija li tipproteġi kontra attakki "buffer overflow" u "format string".

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
target: Printer jismu "%s" diġà jeżisti taħt %s.
    Klikkja "Ittrasferixxi" biex tħassar li hemm.
    Tista' wkoll tagħtih isem ġdid jew taqbżu.

en: A problem occured while restarting the network: 
    
    %s
target: Kien hemm problema waqt li n-network kien qed jiġi ristartjat: 
    
    %s

en: A tool to monitor your logs
target: Għodda biex tifli l-logs

en: A valid URI must be entered!
target: Trid iddaħħal URI validu!

en: ADSL connection
target: Konnessjoni ADSL

en: ALL existing partitions and their data will be lost on drive %s
target: Il-partizzjonijiet kollha fuq id-diska %s u l-informazzjoni ta' ġo fihom se jintilfu

en: Abort
target: Waqqaf

en: About
target: Dwar

en: About Harddrake
target: Dwar Harddrake

en: Accept
target: Naċċetta

en: Accept broadcasted icmp echo
target: Aċċetta "icmp echo" imxandrin

en: Accept icmp echo
target: Aċċetta icmp echo

en: Accept user
target: Aċċetta user

en: Account Login (user name)
target: Login tal-kont (user name)

en: Account Password
target: Password tal-kont

en: Across Network
target: fuq in-network

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
target: Itella' jew iwaqqaf l-interfaċċji kollha tan-network li qegħdin 
    konfigurati biex jitilgħu meta tixgħel.

en: Adapter %s: %s
target: Adattur %s: %s

en: Add
target: Żid

en: Add Client -->
target: Żid klijent -->

en: Add User -->
target: Żid user -->

en: Add a module
target: Żid modulu

en: Add a new printer
target: Żid printer ġdid

en: Add a new rule at the end
target: Żid regola ġdida fit-tarf

en: Add a user
target: Żid user

en: Add an item
target: Żid element

en: Add this printer to Star Office/OpenOffice.org/GIMP
target: Żid dan il-printer ma' StarOffice/OpenOffice

en: Add to LVM
target: Żid ma' LVM

en: Add to RAID
target: Żid ma' RAID

en: Add user
target: Żid user

en: Add/Del Clients
target: Żid/neħħi klijenti

en: Add/Del Users
target: Żid/neħħi users

en: Adding printer to Star Office/OpenOffice.org/GIMP
target: Qed jiġi miżjud printer ma' StarOffice/OpenOffice

en: Advanced
target: Avvanzat

en: Advanced Configuration
target: Konfigurazzjoni Avvanzata

en: Advanced Options
target: Għażliet avvanzati

en: Advanced preferences
target: Għażliet avvanzati

en: Afghanistan
target: Afganistan

en: After changing type of partition %s, all data on this partition will be lost
target: Jekk tibdel it-tip ta' partizzjoni %s, l-informazzjoni kollha li hemm fuqha tintilef

en: After formatting partition %s, all data on this partition will be lost
target: Wara li tifformattja l-partizzjoni %s, l-informazzjoni kollha fuqha tintilef.

en: After resizing partition %s, all data on this partition will be lost
target: Wara li tibdel id-daqs tal-partizzjoni %s, l-informazzjoni kollha fuqha tintilef

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
target: Wara li jkun lest, aħna nirrikmandaw li tirristartja s-sistema X biex tevita problemi ta' bdil fl-isem tal-kompjuter.

en: Albania
target: Albanija

en: Albanian
target: Albaniż

en: Algeria
target: Alġerija

en: All
target: Kollha

en: All data on this partition should be backed-up
target: L-informazzjoni kollha fuq din il-partizzjoni għandha tiġi kkupjata fuq kopja tas-sigurtà

en: All incidents will be followed up by a single qualified MandrakeSoft technical expert.
target: Kull inċident jiġi segwit individwalment minn espert tekniku kwalifikat ta' MandrakeSoft

en: All languages
target: Lingwi kollha

en: All primary partitions are used
target: Il-partizzjonijiet primarji kollha mimlijin

en: Allow all users
target: Ippermetti l-users kollha

en: Allow an ordinary user to mount the file system. The
    name of the mounting user is written to mtab so that he can unmount the file
    system again. This option implies the options noexec, nosuid, and nodev
    (unless overridden by subsequent options, as in the option line
    user,exec,dev,suid ).
target: Ippermetti user normali li jimmonta s-sistema ta' fajls. L-isem ta'
    min jimmonta jinkiteb f' mtab ħalli jkun jista' jerġa' jiżmonta s-sistema.
    Din l-għażla impliċitament tinkludi noexec, nosuid u nodev sakemm ma
    jiġux espliċitament inklużi fil-linja ta' kmand.

en: Allow local hardware
    configuration.
target: Ippermetti konfigurazzjoni 
    tal-ħardwer lokalment

en: Allow/Forbid autologin.
target: Ippermetti/iċħad autologin.

en: Alt and Shift keys simultaneously
target: Alt u Shift flimkien

en: Alternative drivers
target: Drajvers alternattivi

en: Alternative test page (A4)
target: Paġna alternattiva (A4)

en: Alternative test page (Letter)
target: Paġna alternattiva (Letter)

en: American Samoa
target: Samoa Amerikana

en: Amusement programs: arcade, boards, strategy, etc
target: Programmi ta' divertiment: logħob tal-arcades, karti, strateġija eċċ

en: An error occurred
target: Inqalgħet problema

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
target: Instabet problema - ebda apparat validu ma nstab fejn jinħolqu filesystems ġodda. Iċċekkja l-kompjuter għall-kawża ta' din il-problema.

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
target: Inqalgħet problema, imma ma nafx kif nieħu ħsieba sew.
    Tista' tkompli b'riskju tiegħek

en: An error occurred:
    %s
    Try to change some parameters
target: Inqalgħet problema:
    %s
    Ipprova ibdel xi parametri

en: An online platform to respond to enterprise support needs.
target: Pjattaforma online biex tirrispondi għall-ħtiġijiet ta' sapport speċifiċi ta' kumpanniji

en: Anacron is a periodic command scheduler.
target: Anacron iħaddem kmandijiet perjodikament.

en: And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos.
target: Mandrake Linux 8.2 iħallik tuża l-aħħar programmi biex tisma' mużika w awdjo, teditja u torganizza ritratti u stampi, u tara TV u videos

en: Anguilla
target: Angwilla

en: Another one
target: Ieħor

en: Antarctica
target: Antarktika

en: Antigua and Barbuda
target: Antigwa u Barbuda

en: Apache World Wide Web Server
target: Server tal-World Wide Web Apache

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
target: Apache huwa server tal-web. Huwa jista' joffri fajls HTML u CGI.

en: Append
target: Żid fl-aħħar

en: Application:
target: Programm:

en: Apply
target: Applika

en: Apply filter
target: Applika filtru

en: Arabic
target: Għarbi

en: Are you sure that you want to set up printing on this machine?
target: Żgur li trid tissettja l-ipprintjar fuq dan il-kompjuter?

en: Area:
target: Reġjun :

en: Argentina
target: Arġentina

en: Armenia
target: Armenija

en: Armenian (old)
target: Armen (antik)

en: Armenian (phonetic)
target: Armen (fonetiku)

en: Armenian (typewriter)
target: Armen (tajprajter)

en: At this point, you need to decide where you want to install the Mandrake
    Linux operating system on your hard drive. If your hard drive is empty or
    if an existing operating system is using all the available space you will
    have to partition the drive. Basically, partitioning a hard drive consists
    of logically dividing it to create the space needed to install your new
    Mandrake Linux system.
    
    Because the process of partitioning a hard drive is usually irreversible
    and can lead to lost data if there is an existing operating system already
    installed on the drive, partitioning can be intimidating and stressful if
    you are an inexperienced user. Fortunately, DrakX includes a wizard which
    simplifies this process. Before continuing with this step, read through the
    rest of this section and above all, take your time.
    
    Depending on your hard drive configuration, several options are available:
    
     * "%s": this option will perform an automatic partitioning of your blank
    drive(s). If you use this option there will be no further prompts.
    
     * "%s": the wizard has detected one or more existing Linux partitions on
    your hard drive. If you want to use them, choose this option. You will then
    be asked to choose the mount points associated with each of the partitions.
    The legacy mount points are selected by default, and for the most part it's
    a good idea to keep them.
    
     * "%s": if Microsoft Windows is installed on your hard drive and takes
    all the space available on it, you will have to create free space for
    Linux. To do so, you can delete your Microsoft Windows partition and data
    (see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT
    partition. Resizing can be performed without the loss of any data, provided
    you have previously defragmented the Windows partition and that it uses the
    FAT format. Backing up your data is strongly recommended.. Using this
    option is recommended if you want to use both Mandrake Linux and Microsoft
    Windows on the same computer.
    
       Before choosing this option, please understand that after this
    procedure, the size of your Microsoft Windows partition will be smaller
    then when you started. You will have less free space under Microsoft
    Windows to store your data or to install new software.
    
     * "%s": if you want to delete all data and all partitions present on
    your hard drive and replace them with your new Mandrake Linux system,
    choose this option. Be careful, because you will not be able to undo your
    choice after you confirm.
    
       !! If you choose this option, all data on your disk will be deleted. !!
    
     * "%s": this will simply erase everything on the drive and begin fresh,
    partitioning everything from scratch. All data on your disk will be lost.
    
       !! If you choose this option, all data on your disk will be lost. !!
    
     * "%s": choose this option if you want to manually partition your hard
    drive. Be careful -- it is a powerful but dangerous choice and you can very
    easily lose all your data. That's why this option is really only
    recommended if you have done something like this before and have some
    experience. For more instructions on how to use the DiskDrake utility,
    refer to the ``Managing Your Partitions '' section in the ``Starter
    Guide''.
target: F'dan il-punt int trid tagħżel fejn, fuq il-ħard disk, trid tinstalla s-
    sistema operattiva Mandrake Linux. Jekk il-ħard disk huwa vojt, jew jekk
    hemm sistema operattiva qed tokkupaha kollha, l-ewwel trid toħloq 
    partizzjonijiet. Bażikament, il-partizzjonijiet tal-ħard disk jaqsmu d-diska
    f'partijiet biex ikun hemm sezzjonijiet fejn tiġi nstallata s-sistema ġdida
    Mandrake Linux.
    
    Peress li l-effett ta' partizzjonament tal-ħard disk m'humiex riversibbli,
    u jista' jwassal għal telf ta' informazzjoni jekk diġà hemm sistema 
    operattiva installata, dan il-proċess jista' jidher intimidanti jekk 
    m'għandekx esperjenza. Fortunatament, hemm "saħħar" li jissimplifika 
    l-proċess kollu. Qabel tibda', ikkonsulta l-manwal u ħu l-ħin tiegħek.
    Skond il-konfigurazzjoni tal-ħard disk tiegħek, jista' jkollok diversi għażliet:
    
     * "%s": Din l-għażla toħloq partizzjonijiet awtomatikament.
    M'għandek bżonn tagħmel xejn iżjed..
    
     * "%s": Is-saħħar sab partizzjoni waħda jew iżjed
    tal-Linux fuq il-ħard disk. Jekk trid tuża lilhom, agħżel din.
    
     * "%s": Jekk għandek Microsoft Windows
    installat fuq il-ħard disk u qed jokkupa l-ispazju kollu, trid toħloq ftit 
    spazju għal-Linux. Biex tagħmel dan, trid jew tħassar il-partizzjoni Windows
    u kull m'hemm fiha (ara "Ħassar id-diska sħiħa" jew "Modalità esperta"), 
    jew iċċekken il-partizzjoni Windows. Tista' ċċekken il-partizzjoni Windows 
    mingħajr ma titlef informazzjoni. Din is-soluzzjoni hija rakkomandata biex tuża 
    l-Windows u l-Linux flimkien fuq l-istess kompjuter.
    
       Qabel tagħżel din l-għażla, kun af li wara din il-proċedura, il-partizzjoni
    tal-Windows tkun iżgħar milli hi bħalissa. Ikollok inqas spazju taħt il-
    Microsoft Windows fejn iżżomm informazzjoni jew tinstalla programmi ġodda.
    
     * "%s": Jekk tixtieq tħassar l-informazzjoni kollha u
    l-partizzjonijiet kollha li għandek fuq il-ħard disk u tpoġġi l-Mandrake Linux
    minnflokhom, tista' tagħżel din. Oqgħod attent minn din l-għażla għax ma tkunx
    tista' tibdel fehemtek wara li tikkonferma.
    
       !! Jekk tagħżel din l-għażla, kull m'hemm fuq id-diska jintilef !!
    
     * "%s": Din l-għażla sempliċiment tħassar kull ma' hemm fuq il-ħard 
    disk u tibda' kollox mill-ġdid.
       !! Jekk tagħżel din l-għażla, kull m'hemm fuq id-diska jintilef !!
    
     * "%s": Agħżel dan jekk trid tippartizzjona l-ħard disk 
    manwalment. Oqgħod attent - hija għażla li tagħti kontroll imma hija perikoluża.
    Tista' faċilment titlef l-informazzjoni kollha b'dan il-mod. Għalhekk, tużax din
    l-għażla jekk ma tafx x'qed tagħmel.

en: August
target: Awissu

en: Australia
target: Awstralja

en: Australian Optus cable TV
target: Optus cable TV Awstraljan

en: Austria
target: Awstrija

en: Authentication
target: Awtentikazzjoni

en: Authentication LDAP
target: Awtentikazzjoni LDAP

en: Authentication NIS
target: Awtentikazzjoni NIS

en: Authentication Windows Domain
target: Awtentikazzjoni Dominju Windows

en: Authorize TCP connections to X Window
target: Awtorizza konnessjonijiet TCP għal XWindows

en: Authorize all services controlled by tcp_wrappers
target: Awtoriżża s-servizzi kollha kontrollati minn tcp_wrappers

en: Authors:
target: Awturi:

en: Auto Install
target: Awto-installazzjoni

en: Auto Install Configurator
target: Konfiguratur Awto-Installazzjoni

en: Auto allocate
target: Awto-allokazzjoni

en: Auto-detect
target: Għarfien awtomatiku

en: Auto-detect printers connected directly to the local network
target: Għarfien awtomatiku tal-printers imqabbda direttament man-network

en: Auto-detect printers connected to machines running Microsoft Windows
target: Għarfien awtomatiku tal-printers imqabbda fuq PCs bil-Microsoft Windows

en: Auto-detect printers connected to this machine
target: Għarfien awtomatiku tal-printers imqabbda lokalment

en: Auto-detected
target: Magħruf awtomatikament

en: Autologin
target: Awto-login

en: Automated
target: Awtomatizzata

en: Automatic IP
target: IP Awtomatiku

en: Automatic Steps Configuration
target: Passi tal-Konfigurazzjoni Awtomatika

en: Automatic correction of CUPS configuration
target: Korrezzjoni tal-konfigurazzjoni CUPS awtomatika

en: Automatic dependencies
target: Dipendenzi awtomatiċi

en: Automatic detection and configuration of hardware at boot.
target: Għarfien u konfigurazzjoni ta' apparat ġdid meta tixgħel.

en: Automatic reconfiguration
target: Ri-konfigurazzjoni awtomatika

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
target: Riġenerazzjoni awtomatika tal-headers tal-kernel ġewwa
    /boot għal /usr/include/linux/{autoconf,version}.h

en: Automatic time synchronization (using NTP)
target: Sinkronizzazzjoni tal-ħin awtomatiku (permezz ta' NTP)

en: Automatically find available printers on remote machines
target: Sib printers remoti disponibbli awtomatikament

en: Automatically switch on numlock key locker under console
    and XFree at boot.
target: Awtomatikament ixgħel in-"numlock" taħt il-konsol u XFree 
    meta tixgħel

en: Autoprobe
target: Fittex

en: Available printers
target: Printers disponibbli

en: Azerbaidjani (latin)
target: Ażeri (latin)

en: Azerbaijan
target: Ażerbajġan

en: Backup Now
target: Ħu kopja tas-sigurtà Issa

en: Backup Now from configuration file
target: Ħu kopja tas-sigurtà issa minn fajl ta' konfigurazzjoni

en: Backup Other files...
target: Ħu kopja tas-sigurtà ta' fajls oħrajn...

en: Backup System
target: Ħu kopja tas-sigurtà tas-sistema

en: Backup User files...
target: Ħu kopja tas-sigurtà ta' fajls tal-users...

en: Backup Users
target: Ħu kopja tas-sigurtà tal-users

en: Backup files are corrupted
target: Fajls tal-kopja tas-sigurtà ġew korrotti

en: Backup files not found at %s.
target: Fajls tal-kopja tas-sigurtà ma nstabux f' %s.

en: Backup other files
target: Ħu kopja tas-sigurtà ta' fajls oħrajn

en: Backup system files
target: Ħu kopja tas-sigurtà tal-fajls tas-sistema

en: Backup system files...
target: Ħu kopja ta' sigurtà tal-fajls tas-sistema...

en: Backup the system files before:
target: Ħu kopja tas-sigurtà ta' fajls tas-sistema qabel:

en: Backup user files
target: Ħu kopja tas-sigurtà tal-fajls tal-users

en: Backup your System files. (/etc directory)
target: Ħu kopja tas-sigurtà tal-fajls tas-sistema (direttorju /etc)

en: Bad backup file
target: Fajl ta' kopja tas-sigurtà ħażin

en: Bad choice, try again
target: Għażla ħażina, erġa' pprova

en: Bad package
target: Pakkett ħażin

en: Bad password on %s
target: Password ħażin fuq %s

en: Bahamas
target: Baħamas

en: Bahrain
target: Baħrein

en: Bangladesh
target: Bangladexx

en: Basic
target: Bażiku

en: Be careful: this operation is dangerous.
target: Oqgħod attent: dan il-proċess huwa perikoluż.

en: Be sure a media is present for the device %s
target: Aċċerta li hemm diska fl-apparat %s

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
target: Peress li qed tagħmel installazzjoni minn fuq in-network, in-
    network diġà kkonfigurata.
    Agħfas Ok biex iżżomm din il-konfigurazzjoni, jew ikkanċella biex
    tbiddel il-konfigurazzjoni tal-internet u network.

en: Become a MandrakeExpert
target: Sir espert ma' MandrakeExpert

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
target: Qabel tinstalla fonts, kun ċert li għandek id-dritt tużahom u tinstallahom fuq is-sistema.
    
    -Tista' tinstalla fonts bis-sistema normali. F'każi rari, fonts ħżiena jistgħu iwaħħlulek is-server X.

en: Belarus
target: Bjelorussja

en: Belarusian
target: Bjelorussu

en: Belgian
target: Belġjan

en: Belgium
target: Belġju

en: Belize
target: Beliż

en: Bhutan
target: Butan

en: Bolivia
target: Bolivja

en: Books and Howto's on Linux and Free Software
target: Kotba u "HOWTO" dwar il-Linux u Softwer Ħieles

en: Boot Floppy
target: Flopi "boot"

en: Boot ISO
target: ISO "boot"

en: Boot Protocol
target: Protokoll Boot

en: Boot Style Configuration
target: Konfigurazzjoni ta' l-istil ta' boot

en: Boot device
target: Diska/apparat "boot"

en: Bootloader installation
target: Installazzjoni tal-bootloader

en: Bootloader main options
target: Għażliet prinċipali tal-bootloader

en: Bootloader to use
target: Liema bootloader tuża

en: Bosnia and Herzegovina
target: Bożnija u Ħerżegovina

en: Bosnian
target: Bożnian

en: Both Shift keys simultaneously
target: Iż-żewġ buttuni "shift" flimkien

en: Bouvet Island
target: Gżira Bouvet

en: Brazil
target: Brażil

en: Brazilian (ABNT-2)
target: Brażiljan (ABNT-2)

en: Bringing down the network
target: Qed inniżżel in-network

en: Bringing up the network
target: Qed intella' n-network

en: British Indian Ocean Territory
target: Territorju Brittaniku ta' l-Oċean Indjan

en: Browse
target: Fittex

en: Browse to new restore repository.
target: Fittex repożitorju tar-restawr ġdid.

en: Brunei Darussalam
target: Brunej Darussalam

en: Build All Kernels -->
target: Ibni kernels kollha -->

en: Build Backup
target: Ibni kopja tas-sigurtà

en: Build Single NIC -->
target: Ibni NIC waħda -->

en: Build Whole Kernel -->
target: Ibni kernel sħiħ -->

en: Build the disk
target: Oħloq id-diska

en: Bulgaria
target: Bulgarija

en: Bulgarian (BDS)
target: Bulgaru (BDS)

en: Bulgarian (phonetic)
target: Bulgaru (fonetiku)

en: Bus identification
target: Identifikazzjoni tal-bus

en: Button 2 Emulation
target: Emulazzjoni ta' buttuna #2

en: Button 3 Emulation
target: Emulazzjoni ta' buttuna #3

en: Button `%s': %s
target: Buttuna "%s": %s

en: Buttons emulation
target: Emulazzjoni tal-buttuni

en: C and C++ development libraries, programs and include files
target: Libreriji, programmi u fajls għal żviluppar C u C++

en: CD in place - continue.
target: CD f'postu - kompli.

en: CD-R / DVD-R
target: CDROM / DVDROM

en: CPU flags reported by the kernel
target: Indikaturi tas-CPU rapportati mill-kernel

en: CUPS - Common Unix Printing System
target: CUPS - Sistema ta' Printjar Komuni tal-Unix

en: CUPS configuration
target: Konfigurazzjoni CUPS

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
target: CUPS ma jaċċettax printers fuq servers Novell jew servers li jibgħatu d-data lill kmand "free format".

en: Cable connection
target: Konnessjoni Cable

en: Cache size
target: Daqs tal-cache

en: Calendar
target: Kalendarju

en: Cambodia
target: Kambodja

en: Cameroon
target: Kamerun

en: Can only be mounted explicitly (i.e.,
    the -a option will not cause the file system to be mounted).
target: Jista' biss jiġi mmuntat espliċitament (i.e.,
    l-għażla -a ma jimmontax din is-sistema ta' fajls).

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
target: Ma nistax naċċessa moduli tal-kernel li jikkorrispondu għall-kernel (fajl %s nieqes). Dan normalment ifisser li l-flopi mhuwiex sinkronizzat mal- installazzjoni. Jekk jogħġbok oħloq flopi ġdida biex tistartja fuqha.

en: Can't add a partition to _formatted_ RAID md%d
target: Ma nistax inżid partizzjoni fuq RAID _formattjat_ md%d

en: Can't create catalog!
target: Ma nistax noħloq katalgu

en: Can't find %s on %s
target: Ma nistax insib %s fuq %s

en: Can't launch mkinitrd -f /boot/initrd-%s.img %s.
target: Ma nistax inħaddem mkinitrd -f /boot/initrd-%s.img %s.

en: Can't login using username %s (bad password?)
target: Ma nistax nilloggja bil-user "%s" (password ħażin?)

en: Can't make screenshots before partitioning
target: Ma nistax nieħu ritratti tal-iskrin qabel toħloq il-partizzjonijiet

en: Can't relaunch LiLo!
    Launch "lilo" as root in command line to complete LiLo theme installation.
target: Ma stajtx nerġa'  nħaddem lilo!
    Ħaddem lilo bħala root fil-linja tal-kmand biex tinstalla t-tema magħżula.

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
target: Ma nistax inneħħi l-punt ta' mmuntar għax din il-partizzjoni qed tintuża għal loopback.
    L-ewwel neħħiha minn loopback

en: Can't use broadcast with no NIS domain
target: Ma nistax nuża "broadcast" minngħajr dominju NIS

en: Can't write /etc/sysconfig/bootsplash
    File not found.
target: Ma nistax nikteb /etc/sysconfig/bootsplash
    Fajl ma nstabx.

en: Can't write /etc/sysconfig/bootsplash.
target: Ma nistax nikteb /etc/sysconfig/bootsplash.

en: Canada
target: Kanada

en: Canada (cable)
target: Kanada (cable)

en: Canadian (Quebec)
target: Kanadiż (Quebec)

en: Cancel
target: Ikkanċella

en: CapsLock key
target: Buttuna CapsLock

en: Card IO
target: IO tal-kard

en: Card IO_0
target: IO_0 tal-kard

en: Card IO_1
target: IO_1 tal-kard

en: Card IRQ
target: IRQ tal-kard

en: Card mem (DMA)
target: Mem. tal-kard (DMA)

en: Card model:
target: Mudell tal-kard :

en: Cayman Islands
target: Gżejjer Kajmani

en: Cd-Rom labeled "%s"
target: CD-ROM immarkat "%s"

en: Central African Republic
target: Repubblika Ċentrali Afrikana

en: Chad
target: Ċadd

en: Change
    Restore Path
target: Ibdel direttorju
    għar-restawr

en: Change Cd-Rom
target: Ibdel is-CD

en: Change partition type
target: Ibdel tip ta' partizzjoni

en: Change the printing system
target: Ibdel is-sistema tal-ipprintjar

en: Change type
target: Ibdel tip

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
target: Ibdel id-diska CD!
    
    Jekk jogħġbok daħħal id-diska mmarkata "%s" fid-drajv u agħfas Ok meta tlesti.
    Jekk m'għandekx din id-diska, agħfas "Ikkanċella" biex taqbeż il-pakketti li qegħdin fuqha.

en: Channel
target: Kanal

en: Check additions/removals of sgid files
target: Iċċekkja żieda/tneħħija ta' fajls sgid

en: Check bad blocks?
target: Trid tiċċekkja għal blokki ħżiena?

en: Check empty password in /etc/shadow
target: Iċċekkja passwords vojta f' /etc/shadow

en: Checking %s
target: Qed niċċekkja %s

en: Checking installed software...
target: Qed niċċekkja s-softwer li hemm installat...

en: Checking your system...
target: Qed niċċekkja s-sistema...

en: Chile
target: Ċilè

en: China
target: Ċina

en: China (broadcast)
target: Ċina (xandir)

en: Choose a file
target: Agħżel fajl

en: Choose a mirror from which to get the packages
target: Agħżel mera minn fejn trid iġġib il-pakketti

en: Choose a monitor
target: Agħżel skrin

en: Choose a partition
target: Agħżel partizzjoni

en: Choose action
target: Agħżel azzjoni

en: Choose an existing LVM to add to
target: Agħżel LVM eżistenti biex iżżid miegħu

en: Choose an existing RAID to add to
target: Agħżel RAID eżistenti biex iżżid miegħu

en: Choose another partition
target: Agħżel partizzjoni oħra

en: Choose color
target: agħżel kulur

en: Choose file
target: Agħżel fajl

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
target: Agħżel wieħed mill-printers misjuba mil-lista, jew daħħal isem jew indirizz IP ta' kompjuter, u jekk trid, n-numru tal-port (impliċitament 9100) fil-kaxex.

en: Choose packages to install
target: Agħżel pakketti biex tinstalla

en: Choose the applications that will support the fonts:
target: Agħżel il-programmi li se jużaw il-fonts :

en: Choose the connection you want to configure
target: Agħżel liema konnessjoni trid tissettja

en: Choose the default user:
target: Agħżel il-user impliċitu:

en: Choose the floppy drive you want to use to make the bootdisk
target: Agħżel liema drajv flopi tixtieq tuża biex toħloq il-bootdisk

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on this partition
    will be lost and will not be recoverable!
target: Agħżel liema ħard disk trid tħassar biex tinstalla l-partizzjonijiet tal-
    Mandrake Linux fuqha. Oqgħod attent, l-informazzjoni kollha fuq din id-
    diska jintilef u ma jkunx jista' jinġab lura!

en: Choose the mount points
target: Agħżel punti ta' mmuntar

en: Choose the network interface
target: Agħżel l-interfaċċja tan-network

en: Choose the network or host on which the local printers should be made available:
target: Agħżel in-network jew kompjuter fejn trid li l-printers ikunu aċċessibbli:

en: Choose the new size
target: Agħżel id-daqs il-ġdid

en: Choose the packages you want to install
target: Agħżel il-pakketti li trid tinstalla

en: Choose the partitions you want to format
target: Agħżel liema partizzjonijiet trid tifformattja

en: Choose the profile to configure
target: Agħżel profil li trid tissettja

en: Choose the resolution and the color depth
target: Agħżel reżoluzzjoni u finezza ta' kuluri

en: Choose the sizes
target: Agħżel id-daqsijiet

en: Choose the window manager to run:
target: Agħżel liema "window manager" trid tħaddem:

en: Choose which services should be automatically started at boot time
target: Agħżel liema servizzi għandhom jittellgħu awtomatikament meta tixgħel

en: Choose your CD/DVD device
target: Agħżel apparat CD/DVD

en: Choose your country
target: Agħżel il-pajjiż

en: Choose your filesystem encryption key
target: Agħżel ċavetta għaċ-ċifrazzjoni tal-filesystem

en: Choose your keyboard
target: Agħżel tastiera

en: Christmas Island
target: Gżira Christmas

en: Chunk size %s
target: Daqs ta' "chunk" %s

en: Circular mounts %s
target: Muntaġġ ċirkolari %s

en: Clean /tmp at each boot
target: Naddaf /tmp kull meta tixgħel

en: Clear all
target: Neħħi kollox

en: Click on "%s" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "%s", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "%s" to stop this operation without losing any data and
    partitions present on this hard drive.
target: Klikkja fuq "%s" jekk trid tħassar l-informazzjoni u partizzjonijiet 
    kollha li hemm fuq dan il-ħard disk. Oqgħod attent, wara li tagħfas "%s"
    ma tkunx tista' terġa' tikseb l-informazzjoni u partizzjonijiet li hemm
    fuq dan il-ħard disk, inkluż fajls tal-Windows.
    
    Klikkja "%s" biex twaqqaf dan il-proċess minngħajr ma tħassar
    l-informazzjoni u partizzjonijiet fuq dan il-ħard disk.

en: Click on a device in the left tree in order to display its information here.
target: Agħżel apparat mil-lista tax-xellug biex turi informazzjoni hawn.

en: Clients for different protocols including ssh
target: Klijenti għal protokolli differenti, eż. SSH

en: Close
target: Agħlaq

en: Cocos (Keeling) Islands
target: Gżejjer Cocos (Keeling)

en: Collapse Tree
target: Agħlaq friegħi

en: Colombia
target: Kolombja

en: Color depth: %s
target: Numru ta' kuluri: %s

en: Command line
target: Linja tal-kmand

en: Comoros
target: Komoros

en: Compact
target: Żgħir

en: Computing FAT filesystem bounds
target: Qed nikkalkula l-limiti tal-filesystem FAT

en: Configuration
target: Konfigurazzjoni

en: Configuration Wizards
target: Sħaħar tal-Konfigurazzjoni

en: Configuration changed - restart clusternfs/dhcpd?
target: Konfigurazzjoni mibdula - trid tirristartja clusternfs/dhcpd?

en: Configuration of a remote printer
target: Konfigurazzjoni ta' printer remot

en: Configure
target: Ikkonfigura

en: Configure CUPS
target: Ikkonfigura CUPS

en: Configure Internet Access...
target: Ikkonfigura l-aċċess għall-internet...

en: Configure Local Area Network...
target: Ikkonfigura network lokali (LAN)...

en: Configure X
target: Ikkonfigura X

en: Configure all heads independently
target: Ikkonfigura l-heads kollha independentement

en: Configure bootsplash picture
target: Ikkonfigura stampa tal-boot

en: Configure hostname...
target: Ikkonfigura isem il-kompjuter...

en: Configure module
target: Ikkonfigura modulu

en: Configure mouse
target: Ikkonfigura l-maws

en: Configure networking
target: Ikkonfigura network

en: Configure only card "%s"%s
target: Ikkonfigura l-kard "%s"%s biss

en: Configure services
target: Ikkonfigura servizzi

en: Configure the network now
target: Ikkonfigura n-network issa

en: Configured on other machines
target: Ikkonfigurat fuq kompjuters oħra

en: Configuring IDE
target: Qed nikkonfigura IDE

en: Configuring PCMCIA cards...
target: Qed nissettja kard PCMCIA...

en: Configuring applications...
target: Qed nikkonfigura programmi...

en: Configuring network
target: Konfigurazzjoni tan-network

en: Configuring network device %s
target: Qed nikkonfigura apparat tan-network %s

en: Configuring printer "%s"...
target: Qed nikkonfigura l-printer "%s"...

en: Configuring scripts, installing software, starting servers...
target: Qed nikkonfigura scripts, ninstalla softwer u ntella' servers...

en: Configuring...
target: Qed nikkonfigura...

en: Congo (Brazzaville)
target: Kongo (Brazzaville)

en: Congo (Kinshasa)
target: Kongo (Kinxasa)

en: Congratulations!
target: Prosit!

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
target: Prosit! L-installazzjoni issa lesta.
    Neħħi l-flopi/CD u agħfas Enter biex tirristartja.
    
    
    Għal informazzjoni dwar aġġornamenti li saru għal din il-verżjoni ta' Mandrake 
    Linux, iċċekkja s-sezzjoni "Errata" li hemm fuq:
    
    
    %s
    
    
    Informazzjoni dwar kif tissettja s-sistema tinstab fil-kapitlu "Post-install" 
    fl-Official Mandrake Linux User's Guide.

en: Congratulations, the network and Internet configuration is finished.
target: Prosit! Il-konfigurazzjoni tan-network u l-internet lesti.

en: Connect to the Internet
target: Aqbad ma' l-internet

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
target: Qabbad il-printer ma' server Linux u ħalli kompjuters Windows jużawh bħala klijent.
    
    Trid tkompli tissettja dan il-printer kif qed tagħmel issa?

en: Connect...
target: Aqbad...

en: Connected
target: Imqabbad

en: Connecting to Internet
target: Qed intella' l-internet

en: Connection Configuration
target: Konfigurazzjoni tal-konnessjoni

en: Connection Time:
target: Ħin konness:

en: Connection name
target: Isem tal-konnessjoni

en: Connection speed
target: Veloċità tal-konnessjoni

en: Connection timeout (in sec)
target: Ħin biex tiskadi l-konnessjoni (sek)

en: Connection type:
target: Tip ta' konnessjoni:

en: Console Tools
target: Għodda tal-konsol

en: Contacting Mandrake Linux web site to get the list of available mirrors...
target: Qed nikkuntattja l-website ta' Mandrake Linux biex nikseb lista tal-mirja disponibbli

en: Contacting the mirror to get the list of available packages...
target: Qed nikkuntattja l-mera biex nikseb lista tal-pakketti disponibbli

en: Content of the file
target: Kontenut tal-fajl

en: Continue
target: Kompli

en: Continue anyway?
target: Trid tkompli xorta?

en: Control and Shift keys simultaneously
target: Ctrl u Shift flimkien

en: Cook Islands
target: Gżejjer Cook

en: Copy fonts on your system
target: Ikkopja fonts għas-sistema

en: Copying %s
target: Qed nikkopja %s

en: Costa Rica
target: Kosta Rika

en: Cote d'Ivoire
target: Kosta tal-Avorju

en: Could not install the packages needed to set up a scanner with Scannerdrake.
target: Ma setgħux jiġu nstallati paketti meħtieġa biex tissettja skaner bi ScannerDrake.

en: Couldn't access the floppy!
target: Ma nistax naċċessa l-flopi!

en: Country / Region
target: Pajjiż

en: Cpuid level
target: Livell Cpuid

en: Create
target: Oħloq

en: Create a bootdisk
target: Oħloq "boot disk"

en: Create a new partition
target: Oħloq partizzjoni ġdida

en: Create new theme
target: Oħloq tema ġdida

en: Creating and formatting file %s
target: Qed noħloq u nifformattja fajl %s

en: Creating auto install floppy
target: Qed jinħoloq flopi awto-installazzjoni

en: Creating auto install floppy...
target: Qed jinħoloq flopi awto-installazzjoni

en: Creating bootdisk...
target: Qed tinħoloq diska "boot"

en: Croatia
target: Kroazja

en: Croatian
target: Kroat

en: Cron not available yet as non-root
target: Cron għadu m'hux disponibbli għal users apparti root

en: Ctrl and Alt keys simultaneously
target: Ctrl u Alt flimkien

en: Cuba
target: Kuba

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
target: Konfigurazzjoni kurrenti ta' "%s":
    
    Network: %s
    Indirizz IP: %s
    Attribuzzjoni IP: %s
    Drajver: %s

en: Current interface configuration
target: Konfigurazzjoni kurrenti tal-interfaċċja

en: Current user
target: User kurrenti

en: Currently, no alternative possibility is available
target: Bħalissa, m'hemm ebda alternattiva

en: Custom
target: Personalizzat

en: Custom & system settings
target: Setings personalizzati u tas-sistema

en: Custom Restore
target: Restawr personalizzat

en: Custom disk partitioning
target: Partizzjonament personalizzat

en: Custom settings
target: Setings personalizzati

en: Cylinder %d to %d
target: Ċilindri %d sa %d

en: Cyprus
target: Ċipru

en: Czech (QWERTY)
target: Ċekk (QWERTY)

en: Czech (QWERTZ)
target: Ċekk (QWERTZ)

en: Czech Republic
target: Repubblika Ċeka

en: DHCP Client
target: Klijent DHCP

en: DHCP client
target: Klijent DHCP

en: DNS server
target: Server DNS

en: DNS server address should be in format 1.2.3.4
target: L-indirizz tas-server DNS irid ikun fil-format 1.2.3.4

en: DOS drive letter: %s (just a guess)
target: Ittra tad-diska fid-DOS: %s (probabbli)

en: Danish
target: Daniż

en: Database Server
target: Server Database

en: Day
target: Jum

en: December
target: Diċembru

en: Default
target: Impliċitu

en: Default OS?
target: OS Impliċitu?

en: Default desktop
target: Desktop impliċitu

en: Default printer
target: Printer impliċitu

en: Default user
target: User impliċitu

en: Del profile...
target: Ħassar profil...

en: Delay before booting default image
target: Stennija qabel ittella' l-għażla impliċita

en: Delay before booting the default image
target: Stennija qabel ittella' l-għażla impliċita

en: Delete
target: Ħassar

en: Delete All NBIs
target: Ħassar NBIs kollha

en: Delete Hard Drive tar files after backup to other media.
target: Ħassar il-fajls tar minn fuq il-ħard disk wara l-kopja tas-sigurtà fuq medja ieħor

en: Delete profile
target: Ħassar profil

en: Delete selected printer
target: Ħassar il-printer magħżul

en: Delete selected rule
target: Ħassar ir-regola magħżula

en: Denmark
target: Danimarka

en: Description
target: Deskrizzjoni

en: Description of the fields:
target: Deskrizzjoni tal-elementi:

en: Detailed information
target: Informazzjoni dettaljata

en: Details
target: Dettalji

en: Detected %s
target: Instab %s

en: Detected hardware
target: Ħardwer misjub

en: Detected model: %s
target: Mudell misjub: %s

en: Detected model: %s %s
target: Mudell misjub: %s %s

en: Detecting devices...
target: Qed infittex l-apparat...

en: Detection in progress
target: Għaddej l-għarfien

en: Development
target: Żviluppar

en: Device name to use for backup
target: Isem tal-apparat għall-kopja tas-sigurtà

en: Device:
target: Apparat:

en: Dialing mode
target: Tip ta' daljar

en: Dialup options
target: Għażliet "dialup"

en: Did it work properly?
target: Ħadem sewwa?

en: Differential backups only save files that have changed or are new since the original 'base' backup.
target: Kopji tas-sigurtà differenzjali jiktbu biss dawk il-fajls li nbidlu jew li huma ġodda
    mill-kopja "bażi" oriġinali.

en: Direct root login
target: Login root dirett

en: Directory %s already contains data
    (%s)
target: Id-direttorju %s diġà fih xi fajls
    (%s)

en: Directory (or module) to put the backup on this host.
target: Direttorju (jew modulu) fejn trid tpoġġi l-kopja tas-sigurtà fuq il-kompjuter.

en: Disable Server
target: Diżabilita server

en: Disabling servers...
target: Qed inniżżel is-servers...

en: Disconnect...
target: Aqta'...

en: Disconnecting from Internet
target: Aqta' minn ma' l-internet

en: Disconnection from Internet failed.
target: Ma stajtx naqta' minn ma' l-internet.

en: Display logo on Console
target: Uri logo fil-konsol

en: Display theme
    under console
target: Uri tema
    fil-konsol

en: Djibouti
target: Dġibuti

en: Do it later
target: Agħmel iżjed tard

en: Do it!
target: Agħmel dan!

en: Do new backup before restore (only for incremental backups.)
target: Agħmel kopja tas-sigurtà ġdid qabel tirrestawra (għal kopji tas-sigurtà inkrementali biss)

en: Do not include critical files (passwd, group, fstab)
target: Tinkludix fajls kritiċi (passwd, group, fstab)

en: Do not include the browser cache
target: Tinkludix il-cache tal-browser

en: Do not interpret character or block special devices on the file system.
target: Tinterpretax apparat speċjali ta' karattri jew blokk fuq is-sistema ta' fajls.

en: Do not print any test page
target: Tipprintjax paġna għal test

en: Do not transfer printers
target: Tittrasferixxix printers

en: Do you have an ISA sound card?
target: Għandek kard tal-awdjo ISA?

en: Do you have another one?
target: Għandek iżjed?

en: Do you have any %s interfaces?
target: Il-kompjuter għandu interfaċċji %s?

en: Do you really want to remove the printer "%s"?
target: Żgur li trid tneħħi l-printer "%s"?

en: Do you want the BackSpace to return Delete in console?
target: Trid li l-Backspace tirritorna Delete fuq il-konsol?

en: Do you want to click on this button?
target: Trid tikklikkja din il-buttuna?

en: Do you want to enable printing on printers in the local network?
target: Trid tippermetti printjar fuq printers fuq in-network lokali?

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
target: Trid tippermetti printjar fuq il-printers imsemmija fuq jew fuq printers fuq in-network lokali?

en: Do you want to enable printing on the printers mentioned above?
target: Trid tippermetti printjar fuq il-printers imsemmija fuq ?

en: Do you want to save /etc/fstab modifications
target: Trid tikteb il-modifiki għal /etc/fstab

en: Do you want to set this printer ("%s")
    as the default printer?
target: Tixtieq tissettja dan il-printer ("%s")
    bħala l-printer impliċitu?

en: Do you want to start the connection at boot?
target: Trid taqbad b'din il-konnessjoni malli tixgħel?

en: Do you want to test the configuration?
target: Trid tittestja din il-konfigurazzjoni?

en: Do you want to try to connect to the Internet now?
target: Trid tipprova taqbad ma' l-internet issa?

en: Do you want to use aboot?
target: Trid tuża "aboot"?

en: Do you want to use this feature?
target: Trid tuża din il-faċilità?

en: Documentation
target: Dokumentazzjoni

en: Does not appear to be recordable media!
target: Dan ma jidhirx li huwa medja rekordjabbli

en: Domain
target: Dominju

en: Domain Admin Password
target: Password ta' amministrazzjoni tad-dominju

en: Domain Admin User Name
target: User ta' amministrazzjoni tad-dominju

en: Domain Authentication Required
target: Awtentikazzjoni tad-dominju meħtieġ

en: Domain Name Resolver
target: Risolvitur ta' ismijiet ta' dominji

en: Domain Name Server
target: Server tal-ismijiet tad-dominji

en: Domain Name and Network Information Server
target: Domain Name u Network Information Server

en: Domain name
target: Isem tad-dominju

en: Dominica
target: Dominika

en: Dominican Republic
target: Repubblika Dumnikana

en: Don't rewind tape after backup
target: Tagħmilx rewind wara l-kopja tas-sigurtà

en: Done
target: Lest

en: Down
target: isfel

en: DrakSec Basic Options
target: Għażliet bażiċi DrakSec

en: Drakbackup Configuration
target: Konfigurazzjoni DrakBackup

en: Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
target: Drakperm jintuża biex tara fajls sabiex tirranġa l-permessi, sidien u gruppi permezz ta' msec.
    Tista' wkoll iżżid ir-regoli tiegħek li jieħdu preċedenza fuq regoli impliċiti.

en: Drive capacity
target: Kemm tesa' d-drajv

en: Driver
target: Drajver

en: Driver:
target: Drajver:

en: Duplicate mount point %s
target: Punt ta' mmuntar doppju %s

en: Dutch
target: Olandiż

en: Dvorak (Norwegian)
target: Dvorak (Norveġiż)

en: Dvorak (Swedish)
target: Dvorak (Svediż)

en: EIDE/SCSI channel
target: Kanal EIDE/SCSI

en: ERROR: Cannot spawn %s.
target: PROBLEMA: Ma nistax inħaddem %s.

en: East Europe
target: Ewropa tal-Lvant

en: East Timor
target: Timor tal-Lvant

en: Ecuador
target: Ekwador

en: Edit
target: Editja

en: Edit current rule
target: Editja r-regola kurrenti

en: Edit selected host
target: Ibdel il-kompjuter magħżul

en: Edit selected server
target: Editja server magħżul

en: Editors, shells, file tools, terminals
target: Edituri, shells, għodda tal-fajls, terminals

en: Egypt
target: Eġittu

en: Either the server name or the server's IP must be given!
target: Trid tagħti l-isem jew l-indirizz IP tas-server!

en: Eject tape after the backup
target: Oħroġ tejp wara l-kopja tas-sigurtà

en: Empty
target: Vojt

en: Empty label not allowed
target: Isem vojt mhux aċċettat

en: Emulate third button?
target: Emula t-tielet buttuna?

en: Enable "%s" to execute the file
target: Ixgħel "%s" biex teżegwixxi l-fajl

en: Enable "%s" to write the file
target: Igħel "%s" biex tikteb il-fajl

en: Enable "crontab" and "at" for users
target: Ixgħel "crontab" u "at" għal users

en: Enable CD Boot?
target: Ippermetti boot mis-CD?

en: Enable OF Boot?
target: Ippermetti Boot OF?

en: Enable Server
target: Ippermetti server

en: Enable msec hourly security check
target: Ixgħel test tas-sigurtà kull siegħa msec

en: Enable multiple profiles
target: Ippermetti profili differenti

en: Enable/Disable IP spoofing protection.
target: Igħel/itfi protezzjoni kontra IP spoofing.

en: Enable/Disable msec hourly security check.
target: Ixgħel/itfi l-kontroll ta' sigurtà msec ta' kull siegħa

en: Enable/Disable syslog reports to console 12
target: Igħel/itfi rapporti syslog fuq konsol 12

en: Enabling servers...
target: Qed intella' s-servers...

en: Enabling swap partition %s
target: Qed nixgħel partizzjoni swap %s

en: Encryption key
target: Ċavetta taċ-ċifrazzjoni

en: Encryption key (again)
target: Ċavetta taċ-ċifrazzjoni (darb' oħra)

en: Encryption key for %s
target: Ċifrarju għal %s

en: Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux
target: Tejjeb il-funzjoni tal-kompjuter bl-għajnuna ta' għażla ta' ditti mseħbin li joffru soluzzjonijiet kompatibbli ma' Mandrake Linux.

en: Enter a printer device URI
target: Daħħal URI tal-printer

en: Enter a user
    %s
target: Daħħal dettalji ta' user
    %s

en: Enter the maximum size
     allowed for Drakbackup (MB)
target: Daħħal id-daqs massimu 
    permess għal DrakBackup (MB)

en: Entering step `%s'
target: Dieħel fil-pass "%s"

en: Entries you'll have to fill:
    %s
target: Elementi li trid timla':
    %s

en: Equatorial Guinea
target: Gwinea Ekwatorjali

en: Erase entire disk
target: Ħassar kull m'hemm fid-diska

en: Erase tape before backup
target: Ħassar tejp qabel kopja tas-sigurtà

en: Erase your RW media (1st Session)
target: Ħassar il-medja RW (1el sessjoni)

en: Error
target: Problema

en: Error during sending file via FTP.
     Please correct your FTP configuration.
target: Problema biex jintbagħat fajl bl-FTP.
     Jekk jogħġbok ikkoreġi l-konfigurazzjoni FTP.

en: Error during sendmail.
      Your report mail was not sent.
      Please configure sendmail
target: Problema waqt sendmail
      ir-rapport ma ntbagħatx.
      Jekk jogħġbok ikkonfigura s-sendmail

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
target: Problema fl-installazzjoni ta' aboot.
    trid tipprova timponi l-installazzjoni anke jekk tħassar l-ewwel partizzjoni?

en: Error opening %s for writing: %s
target: Problema waqt il-ftuħ ta' %s għall-kitba: %s

en: Error reading file %s
target: Problema fil-qari tal-fajl %s

en: Error writing to file %s
target: Problema waqt kitba fil-fajl %s

en: Error!
target: Problema!

en: Error: The "%s" driver for your sound card is unlisted
target: Problema: Id-drajver %s għall-kard awdjo tiegħek mhux elenkat

en: Estimating
target: Qed nieħu stima

en: Estonia
target: Estonja

en: Estonian
target: Estonjan

en: Etherboot Floppy/ISO
target: Etherboot flopi/ISO

en: Etherboot ISO image is %s
target: Fajl ISO "etherboot" hija %s

en: Ethernet Card
target: Kard Ethernet

en: Ethernetcard
target: Kard Ethernet

en: Ethiopia
target: Etjopja

en: European protocol (EDSS1)
target: Protokoll Ewropew (EDSS1)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
target: Kull printer jeħtieġ isem, (eż, "printer"). Id-deskrizzjoni u post m'għandhomx bżonn jimtlew. Huma kummenti għall-użu tiegħek.

en: Everything (no firewall)
target: Kollox (mingħajr firewall)

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
target: Kollox ġie konfigurat.
    Issa tista taqsam konnessjonijiet ma' kompjuters oħra fuq in-network lokali, permezz tal-faċilità ta' konfigurazzjoni awtomatika (DHCP).

en: Exit
target: Oħroġ

en: Exit install
target: Oħroġ mill-installazzjoni

en: Expand Tree
target: Espandi friegħi

en: Expert Mode
target: Modalità esperti

en: Extended partition not supported on this platform
target: Partizzjoni estiża m'hix sapportita fuq din il-pjattaforma

en: External ISDN modem
target: Modem ISDN estern

en: FAT resizing failed: %s
target: Bdil tad-daqs FAT falla: %s

en: FATAL
target: FATALI

en: FTP proxy
target: Proxy FTP

en: Failed to add the printer "%s" to Star Office/OpenOffice.org/GIMP.
target: Ma rnexxielix inżid il-printer "%s" ma' StarOffice/OpenOffice

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)
target: Ma rnexxielix jiċċekkja l-filesystem %s. Trid issewwi l-problemi? (attent, tista' titlef informazzjoni)

en: Failed to configure printer "%s"!
target: Ma stajtx nikkonfigura l-printer "%s"!

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org/GIMP.
target: Ma rnexxielix inneħħi l-printer "%s" minn StarOffice/OpenOffice

en: Falkland Islands (Malvinas)
target: Gżejjer Falkland

en: Faroe Islands
target: Gżejjer Faroe

en: Fdiv bug
target: Bug "fdiv"

en: February
target: Frar

en: Fiji
target: Fiġi

en: File Selection
target: Għażla ta' fajls

en: File already exists. Use it?
target: Fajl diġà jeżisti. Tuża lilu?

en: File sharing
target: Qsim ta' fajls

en: Files Restored...
target: Fajls restawrati...

en: Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up.
target: Fajls u mudelli elenkati ġo fajl jismu .backupignore fil-livell bażi ta' sett ta' direttorji jiġu esklużi mill-kopja tas-sigurtà.

en: Filesystem encryption key
target: Ċavetta taċ-ċifrazzjoni tal-filesystem (password)

en: Filesystem type:
target: Tip ta' filesystem:

en: Filesystem types:
target: Tipi ta' filesystem

en: Find the solutions of your problems via MandrakeSoft's online support platform.
target: Sib is-soluzzjoni għall-problemi li tiltaqa' magħhom permezz tal-pjattaforma ta' sapport "online" ta' MandrakeSoft

en: Finding packages to upgrade...
target: Qed insib pakketti x'naġġorna

en: Finish
target: Spiċċa

en: Finland
target: Finlandja

en: Finnish
target: Finlandiż

en: Firewalling configuration detected!
target: Instabet konfigurazzjoni ta' firewall!

en: Firewire controllers
target: Kontrollaturi tal-firewire

en: First DNS Server (optional)
target: L-ewwel server DNS (opzjonali)

en: First Time Wizard
target: Saħħar ta' l-ewwel darba

en: First floppy drive
target: Drajv ewlieni tal-flopi

en: First sector of boot partition
target: L-ewwel settur tal-partizzjoni "boot"

en: First sector of drive (MBR)
target: L-ewwel settur tal-ħard disk (MBR)

en: First sector of the root partition
target: L-ewwel settur tal-partizzjoni root

en: Floppy
target: Flopi

en: Floppy can be removed now
target: Il-flopi tista' titneħħa issa

en: Floppy creation completed
target: Ħolqien ta' flopi lest

en: Floppy format
target: Ifformattja flopi

en: Font List
target: Lista ta' fonts

en: Fonts copy
target: Ikkupjar ta' fonts

en: For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup.
target: Għal kopji fuq mezzi oħra, il-fajls xorta jinħalqu fuq il-ħard disk, u mbgħad jitmexxew fuq il-mezz l-ieħor. Jekk tixgħel din l-għażla il-fajls tar jitneħħew mill-ħard disk wara l-kopja.

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
target: Għal ħafna kards tat-TV moderni, il-modulu bttv tal-kernel GNU/Linux awtomatikament isib il-parametri tajba.
    Jekk il-kard ma tingħarafx sew, tista' ġġegħlu jieħu t-tuner u kard it-tajba minn hawn. Sempliċiment agħżel il-kard u parametri jekk meħtieġa.

en: For security reasons, it will be disconnected now.
target: Għal raġunijiet ta' sigurtà, issa si jkun skonness.

en: Force No APIC
target: Tippermettix APIC

en: Format
target: Formattja

en: Format partitions
target: Ifformattja partizzjonijiet

en: Formatted
target: Formattjat

en: Formatting partition %s
target: Qed nifformattja partizzjoni %s

en: Found "%s" interface do you want to use it ?
target: Sibt interfaċċja "%s" - trid tużaha?

en: Found %s %s interfaces
target: Sibt %s interfaċċji %s

en: France
target: Franza

en: France [SECAM]
target: Franza [SECAM]

en: French
target: Franċiż

en: French Guiana
target: Gwijana Franċiża

en: French Polynesia
target: Polineżja Franċiża

en: French Southern Territories
target: Territorji Franċiżi tan-Nofsinhar

en: Friday
target: il-Ġimgħa

en: Ftp Server
target: Server FTP

en: GNU/Linux is a multi-user system, meaning each user may have their own
    preferences, their own files and so on. You can read the ``Starter Guide''
    to learn more about multi-user systems. But unlike "root", who is the
    system administrator, the users you add at this point will not be
    authorized to change anything except their own files and their own
    configurations, protecting the system from unintentional or malicious
    changes that impact on the system as a whole. You will have to create at
    least one regular user for yourself -- this is the account which you should
    use for routine, day-to-day use. Although it is very easy to log in as
    "root" to do anything and everything, it may also be very dangerous! A
    very simple mistake could mean that your system will not work any more. If
    you make a serious mistake as a regular user, the worst that will happen is
    that you will lose some information, but not affect the entire system.
    
    The first field asks you for a real name. Of course, this is not mandatory
    -- you can actually enter whatever you like. DrakX will use the first word
    you typed in this field and copy it to the "%s" field, which is the name
    this user will enter to log onto the system. If you like, you may override
    the default and change the username. The next step is to enter a password.
    From a security point of view, a non-privileged (regular) user password is
    not as crucial as the "root" password, but that is no reason to neglect
    it by making it blank or too simple: after all, your files could be the
    ones at risk.
    
    Once you click on "%s", you can add other users. Add a user for each one
    of your friends: your father or your sister, for example. Click "%s" when
    you have finished adding users.
    
    Clicking the "%s" button allows you to change the default "shell" for
    that user (bash by default).
    
    When you have finished adding users, you will be asked to choose a user
    that can automatically log into the system when the computer boots up. If
    you are interested in that feature (and do not care much about local
    security), choose the desired user and window manager, then click "%s".
    If you are not interested in this feature, uncheck the "%s" box.
target: GNU/Linux hija sistema operattiva "multi-user", u dan ifisser li l-users 
    kollha jista' jkollhom il-preferenzi tagħhom, fajls personali eċċ. Tista'
    taqra "Starter Guide" għal iżjed tagħrif dwar dan. Imma, kontra tal-user 
    "root", li huwa l-amministratur, il-users li żżid hawn ma jkunu jistgħu jibdlu 
    xejn ħlief il-fajls u konfigurazzjoni personali tagħhom. Dan jipproteġi lis-
    sistema minn bidliet mhux intenzjonati jew malizzjużi li jaffettwaw lis-sistema
    sħiħa. Trid toħloq ta' l-inqas user regolari wieħed għalik. Dan huwa l-user 
    li bih għandek tagħmel ix-xogħol ta' kuljum. Filwaqt li jista' jkun iżjed faċli 
    tuża l-user "root" ta' kuljum, dan huwa perikoluż ħafna. L-iċken żball 
    jista' jwaqqaf is-sistema milli taħdem. Jekk tagħmel anke żball serju 
    b'user regolari, tista' titlef xi informazzjoni imma mhux is-sistema sħiħa.
    
    L-ewwel trid iddaħħal l-isem veru tiegħek. Dan mhux bilfors, ovvjament, u
    fil-fatt tista' ddaħħal li trid. DrakX imbagħad jieħu l-ewwel kelma u ipoġġiha
    f' "%s". Dan huwa l-isem li jintuża biex tidħol fis-sistema. 
    Tista' tibdel dan l-isem, imbagħad daħħal password. Filwaqt li l-password ta'
    user regolari mhux kruċjali daqs tar-root, dejjem jaqbillek tagħżel password
    tajjeb - ftakar li hemm il-fajls tiegħek fin-nofs.
    
    Jekk tagħfas "%s", tista' żżid users oħra kemm hemm bżonn. Tista' żżid users għal ħutek, it-tfal jew ġenituri, jew lill-ħbieb, per eżempju. 
    Meta tlesti milli żżid il-users kollha li trid, agħfas "%s".
    
    Jekk tagħfas il-buttuna "%s", tkun tista' tbiddel ix-"shell" 
    impliċita tal-user, li normalment tkun "bash".
    
    Meta tlesti toħloq users, int tintalab tagħżel user li awtomatikament 
    jiġi lloggjat fis-sistema meta tixgħel. Jekk trid tuża din il-faċilità (u m'intix
    konċernat dwar sigurtà lokali), agħżel il-user li tixtieq u d-desktop, u
    agħfas "%s". Jekk ma tixtieqx tuża din il-faċilità, agħfas "%s".

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
target: GPM jippermetti l-użu tal-maws fi programmi non-grafiċi bħall-Midnight
    Commander. Jippermetti wkoll ikkopjar ta' test u menus popup fil-konsol.

en: Gambia
target: Gambja

en: Game station
target: Logħob

en: Gateway (e.g. %s)
target: Gateway (eż. %s)

en: Gateway address should be in format 1.2.3.4
target: L-indirizz tal-gateway irid ikun fil-format 1.2.3.4

en: Gateway device
target: Apparat gateway

en: General
target: Ġenerali

en: Generate auto install floppy
target: Oħloq flopi awto-installa

en: Generating preview ...
target: Qed tiġi ġenerata previżjoni...

en: Generic
target: Ġeneriku

en: Generic 2 Button Mouse
target: Ġeneriku 2 buttuni

en: Generic 3 Button Mouse
target: Ġeneriku 3 buttuni

en: Generic 3 Button Mouse with Wheel emulation
target: Maws ġeneriku bi 3 buttuni u emulazzjoni tar-rota

en: Generic PS2 Wheel Mouse
target: Maws bir-rota ġeneriku PS2

en: Generic Printers
target: Printers ġeneriċi

en: Geometry: %s cylinders, %s heads, %s sectors
target: Ġeometrija: %s ċilindri, %s heads, %s setturi

en: Georgia
target: Ġorġja

en: Georgian ("Latin" layout)
target: Ġorġjan (tqassim "Latin")

en: Georgian ("Russian" layout)
target: Ġorġjan (tqassim "Russu")

en: German
target: Ġermaniż

en: German (no dead keys)
target: Ġermaniż (bla deadkeys)

en: Germany
target: Ġermanja

en: Get Windows Fonts
target: Ġib fonts mill-Windows

en: Ghana
target: Gana

en: Ghostscript referencing
target: Riferenzi għall-Ghostscript

en: Gibraltar
target: Ġibiltar

en: Give a file name
target: Agħti isem ta' fajl

en: Give the ram size in MB
target: Agħti d-daqs tar-RAM f'MB

en: Gnome Workstation
target: Gnome

en: Go on anyway?
target: Trid tkompli xorta?

en: Go on without configuring the network
target: Kompli kkonfigura mingħajr network

en: Graphic Card
target: Kard grafika

en: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
target: Kard grafika
    
       L-installatur normalment jagħraf u jikkonfigura l-kard grafika installata fuq 
    il-kompjuter tiegħek. Jekk mhux il-każ, tista' tagħżel mil-lista il-kard li għandek
    installata.
    
    F'każ li iżjed minn server wieħed jeżisti għall-kard tiegħek, bil- jew mingħajr 
    aċċelerazzjoni 3D, int tintalab tagħżel is-server li jaqdi ħtiġijietek l-aħjar.

en: Graphical Environment
target: Ambjent Grafiku

en: Graphical Interface
target: Interfaċċja grafika

en: Graphical interface at startup
target: X fil-bidu

en: Graphics card: %s
target: Kard grafika: %s

en: Graphics card: %s
target: Kard grafika: %s

en: Graphics memory: %s kB
target: Memorja grafika: %s kB

en: Greece
target: Greċja

en: Greek
target: Grieg

en: Greek (polytonic)
target: Grieg (politoniku)

en: Greenland
target: Grinlandja

en: Group
target: Grupp

en: Guadeloupe
target: Gwadelup

en: Guam
target: Gwam

en: Guatemala
target: Gwatemala

en: Guinea
target: Gwinea

en: Guinea-Bissau
target: Gwinea-Bissau

en: Gujarati
target: Guġarati

en: Gurmukhi
target: Gurmukħi

en: Guyana
target: Gujana

en: HTTP proxy
target: Proxy HTTP

en: Haiti
target: Ħaiti

en: Halt bug
target: Waqqaf bug

en: Hard Disk Backup Progress...
target: Progress tal-kopja tas-sigurtà lill-ħard disk...

en: Hard Disk Backup files...
target: Fajls ta' kopji tas-sigurtà fil-ħard disk...

en: Hard drive detection
target: Għarfien tal-ħard disk

en: Hard drive information
target: Informazzjoni dwar il-ħard disk

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
target: HardDrake iħaddem inkjesta tal-ħardwer, u jista' jsib u 
    jikkonfigura apparat ġdid li twaħħal.

en: HardDrive / NFS
target: Ħard disk / NFS

en: Harddrake help
target: Għajnuna ta' Harddrake

en: Harddrake2 version %s
target: Harddrake2 verżjoni %s

en: Hardware
target: Ħardwer

en: Hardware clock set to GMT
target: Arloġġ tal-kompjuter issettjat GMT

en: Have a nice day!
target: Il-ġurnata t-tajba!

en: Help
target: Għajnuna

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
target: Hawn huma l-elementi differenti>
    Tista' żżid iżjed jew tibdel dawk li hemm.

en: Here is a list of the available printing options for the current printer:
target: Dawn huma l-għażliet disponibbli għal dan il-printer:

en: Here is the full list of keyboards available
target: Hawn issib lista sħiħa tat-tastieri disponibbli

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
target: Hawn tista' tagħżel il-buttuna jew kombinazzjoni ta' buttuni
    li jħalluk tibdel minn tqassim għal ieħor tat-tastiera 
    (eż. latin u mhux latin)

en: Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines.
target: Hawn tista' tagħżel jekk il-printers imqabbda ma' din il-magna għandhomx ikunu aċċessibbli minn kompjuters remoti, u minn liema kompjuters.

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
target: Hawn tista' tagħżel drajver alternattiv  (OSS jew ALSA) għall-kard awdjo tiegħek (%s).

en: Hide files
target: Aħbi fajls

en: High
target: Tajjeb

en: Higher
target: Tajjeb ħafna

en: Honduras
target: Ħonduras

en: Hong Kong
target: Ħong Kong

en: Horizontal refresh rate
target: Frekwenza orizzontali

en: Host "%s", port %s
target: Kompjuter "%s", port %s

en: Host %s
target: Kompjuter %s

en: Host Name
target: Isem tal-kompjuter

en: Host Path or Module
target: Passaġġ jew modulu tal-kompjuter

en: Host name
target: Isem tal-kompjuter

en: Hostname required
target: Isem tal-kompjuter meħtieġ

en: Hostname:
target: Isem tal-kompjuter:

en: How is the printer connected?
target: Kif inhu mqabbad il-printer?

en: Hungarian
target: Ungeriż

en: Hungary
target: Ungerija

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
target: Nista' nżomm il-konfigurazzjoni kurrenti u nassumi li diġà ssettjajt server DHCP; f'dak il-każ ikkonferma li qrajt l-indirizz tan-network sew; Ma nerġax nikkonfiguraha u ma mmissx il-konfigurazzjoni tas-server DHCP.
    
    Is-seting tad-DNS impliċitu huwa tal-"caching nameserver" fuq il-firewall. Tista' tibdel dan mal-IP tad-DNS tal-ISP tiegħek, per eżempju.
    
    Inkella, nista' nerġa' nikkonfigura l-interfaċċja u nissettjalek server DHCP.

en: I can set up your computer to automatically log on one user.
target: Nista' nissettja l-kompjuter biex awtomatikament jagħmel login fuq user wieħed.

en: I can setup your computer to automatically start the graphical interface (XFree) upon booting.
    Would you like XFree to start when you reboot?
target: Nista' nissettja l-kompjuter biex awtomatikament jidħol f' X malli jitla'.
    Trid ittella' X Windows meta tixgħel?

en: I can't add any more partition
target: Ma nistax inżid iżjed partizzjonijiet

en: I can't find any room for installing
target: Ma nistax insib spazju fejn ninstalla.

en: I can't find needed image file `%s'.
target: Ma nistax insib il-fajl "image" meħtieġ "%s"

en: I can't read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to lose all the partitions?
target: Ma nistax naqra t-tabella tal-partizzjonijiet għall-apparat %s, hija 
    korrotta wisq. Nista' nkompli billi nħassar partizzjonijiet ħżiena 
    (L-INFORMAZZJONI KOLLHA tintilef). L-alternattiva hi li ma tħallix 
    lill DrakX ibiddel it-tabella tal-partizzjonijiet (il-problema hi 
    %s)
    
    Trid titlef il-partizzjonijiet kollha?

en: I don't know
target: Ma nafx

en: I don't know how to format %s in type %s
target: Ma nafx kif nifformattja %s b'tip %s

en: I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.
target: Sibt kard ISDN PCI, imma ma nafx x'tip hi. Jekk jogħġbok agħżel kard PCI fuq l-iskrin li jmiss.

en: IP Range Start:
target: Bidu ta' medda IP:

en: IP address
target: Indirizz IP

en: IP address should be in format 1.2.3.4
target: L-indirizz IP irid ikun fil-format "1.2.3.4"

en: ISDN Configuration
target: Konfigurazzjoni ISDN

en: ISDN connection
target: Konnessjoni ISDN

en: Iceland
target: Islandja

en: Icelandic
target: Islandiż

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
target: Icewm, Window Maker, Enlightenment, Fvwm, eċċ

en: Icon
target: Stampa

en: If set, send the mail report to this email address else send it to root
target: Jekk mixgħul, ir-rapport jintbagħat lil dan l-indirizz, inkella lil root

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
target: Jekk għandek is-CDs kollha fil-lista ta' taħt agħfas "Ok".
    Jekk m'għandek ebda waħda agħfas "Ikkanċella".
    Jekk m'għandekx uħud minnhom, neħħi li m'għandekx u agħfas "Ok".

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
target: Jekk bi ħsiebek tuża aboot, kun ċert li tħalli spazju fil-bidu tad-diska (2048 setturi biżżejjed)

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
target: Jekk il-printer tiegħek mhux imniżżel, agħżel mudell kompatibbli (ara l-manwal tal-printer) jew wieħed simili.

en: Import Fonts
target: Importazzjoni ta' fonts

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
target: Apparti minn dan, kjus li ma nħalqux b'dan il-programm jew "foomatic-configure" ma jistgħux jiġu trasferiti.

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
target: F'ċerti każi id-drajver %s ikollu bżonn iżjed informazzjoni biex jaħdem
    sew, għalkemm is-soltu jaħdem sew mingħajrha. Trid tispeċifika xi
    informazzjoni lid-drajver, jew tħallih ifittex l-apparat waħdu? Kulltant, it-
    tfittix iġiegħel lill-kompjuter jeħel, imma dan m'għandux jagħmel ħsara.

en: India
target: Indja

en: Individual package selection
target: Agħżel pakketti individwalment

en: Indonesia
target: Indoneżja

en: Information
target: Informazzjoni

en: Init Message
target: Messaġġ tal-bidu

en: Initial tests
target: Testijiet preliminari

en: Initrd-size
target: Daqs ta' initrd

en: Insert a FAT formatted floppy in drive %s
target: Daħħal flopi formattjata FAT fid-drajv %s

en: Insert a FAT formatted floppy in drive %s with %s in root directory and press %s
target: Daħħal flopi formattjata FAT fid-drajv %s, b' %s fid-direttorju root, u agħfas %s

en: Insert a blank floppy in drive %s
target: Daħħal flopi vojta fid-drajv %s

en: Insert a floppy containing package selection
target: Daħħal flopi li fiha għażla ta' pakketti

en: Insert a floppy in %s
target: Daħħal flopi ġdida f' %s

en: Insert a floppy in drive
    All data on this floppy will be lost
target: Daħħal flopi fid-drajv
    Kull ma hemm fuq il-flopi se jitħassar

en: Insert floppy
target: Daħħal flopi

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
target: Daħħal is-CD bit-tikketta tal-volum %s
    fid-drajv CD taħt punt ta' mmuntar /mnt/cdrom

en: Insert the tape with volume label %s
     in the tape drive device %s
target: Daħħal it-tejp bit-tikketta tal-volum %s
    fl-apparat tat-tejp %s

en: Install
target: Installa

en: Install & convert Fonts
target: Installa u kkonverti fonts

en: Install List
target: Installa lista

en: Install bootloader
target: Installa bootloader

en: Install system
target: Installa s-sistema

en: Install themes
target: Installa temi

en: Install updates
target: Installa aġġornamenti

en: Install/Upgrade
target: Installa/Aġġorna

en: Installation Server Configuration
target: Konfigurazzjoni Server tal-Installazzjoni

en: Installation of %s failed. The following error occured:
target: L-installazzjoni ta' %s falliet. Dan kien il-messaġġ:

en: Installation of bootloader failed. The following error occured:
target: L-installazzjoni tal-bootloader falla. Dan kien il-messaġġ:

en: Installing
target: Qed ninstalla

en: Installing Foomatic...
target: Qed ninstalla Foomatic...

en: Installing HPOJ package...
target: Qed ninstalla pakkett HPOJ...

en: Installing a printing system in the %s security level
target: Qed ninstalla sistema ta' printjar taħt livell ta' sigurtà %s

en: Installing bootloader
target: Qed ninstalla l-bootloader

en: Installing driver for %s card %s
target: Qed ninstalla drajver għal %s kard %s

en: Installing package %s
target: Qed jinstalla il-pakkett %s

en: Installing package %s
    %d%%
target: Qed jiġi nstallat il-pakkett %s
    %d%%

en: Installing packages...
target: Qed ninstalla pakketti...

en: Interface
target: Interfaċċja

en: Interface %s
target: Interfaċċja %s

en: Interface %s (using module %s)
target: Interfaċċja %s (tuża modulu %s)

en: Interface:
target: Interfaċċja:

en: Internal ISDN card
target: Kard ISDN interna

en: Internet Connection Configuration
target: Konfigurazzjoni tal-konnessjoni internet

en: Internet Connection Sharing
target: Qsim tal-konnessjoni tal-internet

en: Internet Connection Sharing configuration
target: Konfigurazzjoni tal-qsim tal-konnessjoni mal-internet

en: Internet Connection Sharing currently disabled
target: Il-qsim tal-konnessjoni tal-internet huwa mitfi

en: Internet Connection Sharing currently enabled
target: Il-qsim tal-konnessjoni tal-internet huwa mixgħul

en: Internet Connection Sharing is now disabled.
target: Il-qsim tal-konnessjoni tal-internet issa mitfi

en: Internet Connection Sharing is now enabled.
target: Qsim tal-konnessjoni tal-internet issa mixgħul.

en: Internet access
target: Aċċess għall-internet

en: Internet configuration
target: Konfigurazzjoni ta' l-internet

en: Internet connection
target: Konnessjoni ma' l-internet

en: Internet connection configuration
target: Konfigurazzjoni tal-konnessjoni internet

en: Internet gateway
target: Gateway tal-internet

en: Internet station
target: Internet

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
target: Port invalidu mogħti: %s.
    Il-format tajjeb huwa "port/tcp" jew "port/udp", 
    fejn port huwa bejn 1 u 65535

en: Iranian
target: Iranjan

en: Ireland
target: Irlanda

en: Irish
target: Irlandiż

en: Is this correct?
target: Dan tajjeb?

en: Is this the correct setting?
target: Dan huwa s-seting tajjeb?

en: Israel
target: Iżrael

en: Israeli
target: Iżraeli

en: Israeli (Phonetic)
target: Iżraeli (fonetiku)

en: Italian
target: Taljan

en: Italy
target: Italja

en: Jamaica
target: Ġamajka

en: January
target: Jannar

en: Japan
target: Ġappun

en: Japan (broadcast)
target: Ġappun (xandir)

en: Japan (cable)
target: Ġappun (cable)

en: Japanese 106 keys
target: Ġappuniż 106 buttuna

en: Japanese text printing mode
target: Modalità għal printjar ta' test Ġappuniż

en: Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:
target: Ingħaqad mat-timijiet tas-sapport ta' MandrakeSoft u l-komunità Linux online biex taqsam l-esperjenzi tiegħek u tgħin lil ħaddieħor billi ssir espert rikonoxxut fuq il-website ta' sapport tekniku:

en: Jordan
target: Ġordan

en: Joystick
target: Ġojstik

en: July
target: Lulju

en: June
target: Ġunju

en: KDE Workstation
target: Stazzjon KDE

en: Kazakhstan
target: Każakstan

en: Keep the changes?
    The current configuration is:
    
    %s
target: Trid iżżomm il-bidliet?
    Il-konfigurazzjoni kurrenti hija:
    
    %s

en: Kensington Thinking Mouse with Wheel emulation
target: Kensington Thinking Mouse b'emulazzjoni tar-rota

en: Kenya
target: Kenja

en: Kernel Boot Timeout
target: Skadenza tal-ħin għall-kernel boot

en: Keyboard
target: Tastiera

en: Keyboard layout: %s
target: Tqassim tat-tastiera: %s

en: Korean keyboard
target: Korean

en: Kuwait
target: Kuwajt

en: Kyrgyzstan
target: Kirgiżstan

en: LAN Configuration
target: Konfigurazzjoni LAN

en: LAN configuration
target: Konfigurazzjoni LAN

en: LAN connection
target: Konnessjoni LAN

en: LDAP Base dn
target: DN bażi LDAP

en: LDAP Server
target: Server LDAP

en: LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally
    automated. DrakX will analyze the disk boot sector and act according to
    what it finds there:
    
     * if a Windows boot sector is found, it will replace it with a grub/LILO
    boot sector. This way you will be able to load either GNU/Linux or another
    OS.
    
     * if a grub or LILO boot sector is found, it will replace it with a new
    one.
    
    If it cannot make a determination, DrakX will ask you where to place the
    bootloader.
target: LILO u grub huma "boot loaders" ta' GNU/Linux. Normalment dan l-istadju
    huwa totalment awtomatizzat. DrakX janalizza s-settur "boot" tad-diska u 
    jaġixxi skond x'isib hemm:
    
     * Jekk isib settur "boot" tal-Windows, huwa jibdlu ma' settur boot ta' 
    grub/LILO. B'dan il-mod tista' ttella' kemm GNU/Linux jew xi sistema 
    operattiva oħra.
     * Jekk isib settur boot eżistenti ta' grub jew LILO, dan jibdlu mal-ġdida.
    
    Jekk ma jistax jiddetermina t-tip, DrakX jistaqsik fejn trid tpoġġi l-bootloader.

en: LILO with graphical menu
target: LILO b'menu grafiku

en: LILO with text menu
target: LILO b'menu testwali

en: LILO/grub Installation
target: Installazzjoni LILO/grub

en: LPD and LPRng do not support IPP printers.
target: LPD u LPRng ma jaċċettawx printers IPP.

en: LPD server "%s", printer "%s"
target: Server LPD "%s", printer "%s"

en: LPRng - LPR New Generation
target: LPRng - LPR Ġenerazzjoni Ġdida

en: LVM name?
target: Isem tal-LVM?

en: LVM-disks %s
target: Diski LVM %s

en: Label
target: Isem

en: Language
target: Agħżel il-lingwa

en: Laotian
target: Laotjan

en: Latin American
target: Latin Amerikan

en: Latvia
target: Latvja

en: Latvian
target: Latvjan

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
target: Ħaddem filtrar ta' pakketti għall-kernel verżjoni 2.2 tal-Linux,
    biex tissettja firewall biex tipproteġi l-kompjuter minn attakki 
    min-network

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
target: Ħaddem is-sistema tal-awdjo ALSA (Advanced Linux Sound Architecture)

en: Launch the graphical environment when your system starts
target: Ħaddem X-Windows malli titla'

en: Launch the sound system on your machine
target: Ħaddem is-sistema awdjo fuq il-kompjuter

en: Launch the wizard
target: Ħaddem is-saħħar

en: Launch userdrake
target: Ħaddem userdrake

en: Leaving in %d seconds
target: Ħiereġ f' %d sekondi

en: Lebanon
target: Libanu

en: Left "Windows" key
target: Buttuna "Windows" tax-xellug

en: Lesotho
target: Leżoto

en: Level %s
target: Livell %s

en: Lexmark inkjet configuration
target: Konfigurazzjoni inkjet Lexmark

en: LiLo and Bootsplash themes installation successful
target: L-installazzjoni ta' lilo u t-tema tal-boot irnexxiet

en: Liberia
target: Liberja

en: Libya
target: Libja

en: License
target: Liċenzja

en: License agreement
target: Qbil mal-liċenzja

en: Lilo message not found
target: Messaġġ lilo ma nstabx

en: Lilo screen
target: Skrin lilo

en: Lilo/grub mode
target: Modalità lilo/grub

en: Linux Standard Base. Third party applications support
target: Linux Standard Base. Sapport ta' programmi ta' terzi partiti

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
target: Linux Virtual Server, li jintuża biex tibni servers kbar u 
    effiċjenti ħafna.

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
target: Il-programm Linuxconf ġieli jagħmel diversi xogħlijiet waqt li qed
    jitla' l-kompjuter biex imantni l-konfigurazzjoni.

en: List of data corrupted:
target: Lista ta' informazzjoni korrotta:

en: List of data to restore:
target: Lista ta' informazzjoni x'tirrestawra:

en: Lithuania
target: Litwanja

en: Lithuanian "number row" QWERTY
target: Litwan QWERTY "number row"

en: Lithuanian "phonetic" QWERTY
target: Litwan QWERTY fonetiku

en: Lithuanian AZERTY (new)
target: Litwan AZERTY (ġdid)

en: Lithuanian AZERTY (old)
target: Litwan AZERTY (antik)

en: Load from floppy
target: Aqra' mill-flopi

en: Load the drivers for your usb devices.
target: Tella' d-drajvers għall-apparat usb

en: Load/Save on floppy
target: Aqra/ikteb fuq flopi

en: Loading from floppy
target: Qed tinqara' l-flopi

en: Loading module %s failed.
    Do you want to try again with other parameters?
target: Il-modulu %s ma rnexxielux jitla'.
    Trid terġa' tipprova b'parametri oħra?

en: Loading printer configuration... Please wait
target: Qed tittella' il-konfigurazzjoni tal-printer... stenna ftit

en: Local Printer
target: Printer lokali

en: Local Printers
target: Printers lokali

en: Local files
target: Fajls lokali

en: Local network(s)
target: Network(s) lokali

en: Local printer
target: Printer lokali

en: Location
target: Post

en: Location on the bus
target: Post fuq il-bus

en: Logical volume name
target: Isem tal-volum loġiku

en: Login ID
target: Login

en: Login name
target: Isem tal-login

en: Logitech CC Series with Wheel emulation
target: Logitech CC Series b'emulazzjoni tar-rota

en: Logitech Mouse (serial, old C7 type)
target: Maws Logitech (serjali, tip C7 antik)

en: Logitech Mouse (serial, old C7 type) with Wheel emulation
target: Maws Logitech (serjali, tip C7 antik) b'emulazzjoni tar-rota

en: Looking at packages already installed...
target: Qed naqra l-pakketti diġà nstallati...

en: Looking for available packages and rebuilding rpm database...
target: Qed insib pakketti disponibbli u nerġa' nibni d-database RPM...

en: Looking for available packages...
target: Qed insib pakketti disponibbli

en: Loopback file name:
target: Isem ta' fajl għal loopback:

en: Loopback file name: %s
target: Isem ta' fajl loopback: %s

en: Loopback file(s):
       %s
target: Fajl/s ta' loopback:
       %s

en: Luxembourg
target: Lussemburgu

en: MOVE YOUR WHEEL!
target: MEXXI R-ROTA!

en: Macedonia
target: Maċedonja

en: Macedonian
target: Maċedonjan

en: Madagascar
target: Madagaskar

en: Mail
target: Imejl

en: Mail Server
target: Server tal-imejl

en: Mail alert
target: Twissija imejl

en: Mail alert configuration
target: Konfigurazzjoni twissijiet imejl

en: Make kernel message quiet by default
target: Aħmel il-messaġġi tal-kernel siekta impliċitament

en: Making printer port available for CUPS...
target: Qed nissettja l-port tal-printer aċċessibbli għal CUPS...

en: Malaysia
target: Malażja

en: Maltese (UK)
target: Malti

en: Maltese (US)
target: Malti (tqassim US)

en: Mandatory package %s is missing
target: Pakkett meħtieġ %s huwa nieqes

en: Mandrake Bug Report Tool
target: Għodda għar-rapporti dwar bugs tal-Mandrake

en: Mandrake Control Center
target: Ċentru tal-Kontroll Mandrake

en: Mandrake Linux 9.2: the ultimate development platform
target: Mandrake Linux 9.2 huwa l-aqwa pjattaforma għall-iżviluppar

en: Mandrake Linux Installation %s
target: Installazzjoni Mandrake Linux %s

en: Mandrake Linux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
target: Tista' tagħżel lingwi oħra li jkun u disponibbli wara li tinstalla

en: Mandrake Terminal Server Configuration
target: Konfigurazzjoni tat-Terminal Server tal-Mandrake

en: Mandrake Tools Explanation
target: Spjegazzjoni tal-għodda Mandrake

en: Manual configuration
target: Konfigurazzjoni manwali

en: March
target: Marzu

en: Marshall Islands
target: Gżejjer Marshall

en: Martinique
target: Martinik

en: Matching
target: Jaqblu

en: Mauritania
target: Mawritanja

en: Mauritius
target: Mawrizju

en: Maximum size
     allowed for Drakbackup (MB)
target: Daqs massimu
     permess għal DrakBackup (MB)

en: May
target: Mejju

en: Mayotte
target: Majott

en: Media class
target: Klassi ta' medja

en: Messages
target: Messaġġi

en: Mexico
target: Messiku

en: Minimal install
target: Installazzjoni minima

en: Minute
target: Minuti

en: Model
target: Mudell

en: Modify
target: Biddel

en: Modify RAID
target: Biddel RAID

en: Modify printer configuration
target: Biddel il-konfigurazzjoni tal-printer

en: Module
target: Modulu

en: Module name
target: Isem tal-modulu

en: Module options:
target: Għażliet tal-modulu:

en: Moldova
target: Moldavja

en: Monaco
target: Monako

en: Monday
target: it-Tnejn

en: Mongolia
target: Mongolja

en: Mongolian (cyrillic)
target: Mongoljan (ċirilliku)

en: Monitor
target: Skrin

en: Monitor HorizSync: %s
target: Frek.Orizzontali Skrin: %s

en: Monitor VertRefresh: %s
target: Frek. Vertikali Skrin: %s

en: Monitor: %s
target: Skrin: %s

en: Month
target: Xahar

en: More
target: Iżjed

en: More Options
target: Iżjed għażliet

en: Morocco
target: Marokk

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
target: Ħafna mill-valuri nkisbu mis-sistema 
    kurrenti. Tista' tibdilhom skond il-bżonn.

en: Mount
target: Immonta

en: Mount options
target: Għażliet għall-immuntar

en: Mount point
target: Post għall-immontar

en: Mount point:
target: Punt ta' mmuntar:

en: Mount points must begin with a leading /
target: Punti ta' mmuntar iridu jibdew b' /

en: Mount points should contain only alphanumerical characters
target: Punti tal-immunar jista' jkun fihom biss ittri u numri

en: Mounted
target: Immuntat

en: Mounting partition %s
target: Qed nimmonta partizzjoni %s

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
target: Jimmonta u jiżmonta l-filesystems kollha NFS (Unix/Linux), 
    SMB (LANmanager/Windows) jew NCP (NetWare).

en: Mouse
target: Maws

en: Mouse Port
target: Port tal-maws

en: Mouse device: %s
target: Apparat maws: %s

en: Mouse type: %s
target: Tip ta' maws: %s

en: Move
target: Mexxi

en: Move files to the new partition
target: Mexxi fajls għal partizzjoni ġdida

en: Move selected rule down one level
target: Mexxi r-regola pass 'l isfel

en: Move selected rule up one level
target: Mexxi r-regola pass 'il fuq

en: Moving
target: Qed titmexxa

en: Moving files to the new partition
target: Qed jitmexxew il-fajls għal partizzjoni ġdida

en: Moving partition...
target: Qed jitmexxa l-partizzjoni...

en: Mozambique
target: Możambik

en: Multi-function device on HP JetDirect
target: Apparat multi-funzjoni fuq HP JetDirect

en: Multi-function device on USB
target: Apparat multi-funzjoni fuq USB

en: Multi-function device on parallel port #%s
target: Apparat multi-funzjoni fuq port parallel #%s

en: Multi-head configuration
target: Konfigurazzjoni multi-head

en: Multimedia station
target: Multimedja

en: Multisession CD
target: CD multi-sessjoni

en: Myanmar
target: Mjanmar

en: Myanmar (Burmese)
target: Mjanmar (Burmiż)

en: NCP queue name missing!
target: Isem tal-kju NCP nieqes!

en: NCP server name missing!
target: Isem tas-server NCP nieqes!

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
target: NFS huwa protokoll popolari għal qsim ta' fajls fuq networks 
    TCP/IP. Dan il-modulu jipprovdi faċilità li ssakkar fajls bl-NFS.

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
target: NFS huwa protokoll popolari għal qsim ta' fajls fuq networks TCP/IP. 
    Dan is-servizz jipprovdi funzjonalità ta' server NFS, li jiġi konfigurat 
    mill-fajl /etc/exports.

en: NFS server, SMB server, Proxy server, ssh server
target: Servers NFS, SMB, Proxy, ssh

en: NIS Domain
target: Dominju NIS

en: NIS Server
target: Server NIS

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
target: NOTA: Skond il-mudell ta' printer u s-sistema ta' pprintjar, jistgħu jiġu nstallati sa' %d MB ta' softwer.

en: NTP Server
target: Server NTP

en: Name
target: Isem

en: Name of printer
target: Isem tal-printer

en: Name of printer should contain only letters, numbers and the underscore
target: L-isem tal-printer jista' jkun fih biss ittri, numri, u underscore

en: Name of the profile to create (the new profile is created as a copy of the current one) :
target: Isem tal-profil ġdid (il-profil il-ġdid ikun kopja ta' dak kurrenti) :

en: Name/IP address of host:
target: Isem/IP tal-kompjuter:

en: Name:
target: Isem:

en: Namibia
target: Namibja

en: Nauru
target: Nawru

en: Need hostname, username and password!
target: Hemm bżonn kompjuter, user u password!

en: Need to create /etc/dhcpd.conf first!
target: L-ewwel irid jinħoloq /etc/dhcp.d!

en: Net Method:
target: Metodu net:

en: NetWare Printer Options
target: Għażliet tal-printer NetWare

en: Network Computer (client)
target: Kompjuter fuq network (klijent)

en: Network Computer server
target: Kompjuter Server tan-Network

en: Network Configuration
target: Konfigurazzjoni tan-network

en: Network Configuration Wizard
target: Saħħar tal-Konfigurazzjoni tan-Network

en: Network Hotplugging
target: Konfigurazzjoni "hotplug" tan-network

en: Network Monitoring
target: Monitoraġġ tan-network

en: Network Options
target: Għażliet tan-network

en: Network configuration
target: Konfigurazzjoni network

en: Network configuration (%d adapters)
target: Konfigurazzjoni network (%d adattur/i)

en: Network functionality not configured
target: Funzjonalità tan-network m'hix ikkonfigurata

en: Network interface
target: Interfaċċja tan-network

en: Network interface already configured
target: Interfaċċja tan-network diġà kkonfigurata

en: Network printer "%s", port %s
target: Printer tan-network "%s", port %s

en: Network printer (TCP/Socket)
target: Printer tan-network (TCP/socket)

en: New
target: Ġdid

en: New devfs device
target: Apparat ġdid devfs

en: New printer name
target: Isem tal-printer ġdid

en: New profile...
target: Profil ġdid...

en: New size in MB:
target: Daqs ġdid f'MB:

en: Newzealand
target: New Zealand

en: Next
target: Li jmiss

en: Next ->
target: Li jmiss ->

en: Nicaragua
target: Nikaragwa

en: Niger
target: Niġer

en: Nigeria
target: Niġerja

en: No
target: Le

en: No CD device defined!
target: Apparat CD mhux speċifikat!

en: No CD-R/DVD-R in drive!
target: Ebda CDR/CDRW fid-drajv!

en: No ISDN PCI card found. Please select one on the next screen.
target: Ebda kard ISDN PCI ma nstabet. Agħżel waħda fl-iskrin li jmiss.

en: No Internet Connection Sharing has ever been configured.
target: Ebda qsim tal-konnessjoni għadu ma ġie konfigurat.

en: No Mask
target: Ebda maskra

en: No NIC selected!
target: Ebda NIC magħżul!

en: No Sound Card detected!
target: Ebda kard tal-awdjo ma nstabet!

en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Ebda kard tal-awdjo ma nstabet fuq il-kompjuter. Jekk jogħġbok iċċekkja li hemm kard li tieħu l-Linux imqabbda sew.
    
    
    Tista' żżur id-database ta' apparat magħruf fuq:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No TV Card detected!
target: Ebda kard TV ma nstabet!

en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Ebda kard TV ma nstabet fuq il-kompjuter. Jekk jogħġbok iċċekkja li hemm kard li tieħu l-Linux imqabbda sew.
    
    
    Tista' żżur id-database ta' apparat magħruf fuq:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No additional information
    about this service, sorry.
target: M'hemmx iżjed informazzjoni
    dwar dan l-apparat, jiddispjaċini.

en: No alternative driver
target: Ebda drajver alternattiv

en: No browser available! Please install one
target: Ebda browser disponibbli! Jekk jogħġbok installa wieħed

en: No changes to backup!
target: Ebda bidliet biex jiġu kkupjati.

en: No configuration file found 
    please click Wizard or Advanced.
target: Ebda fajl ta' konfigurazzjoni ma nstab.
    Agħżel Saħħar jew Avvanzat.

en: No configuration, please click Wizard or Advanced.
target: Ebda konfigurazzjoni, agħżel Saħħar jew Avvanzat

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
target: Ebda kard tan-network ethernet ma nstabet fuq il-kompjuter.
    Ma nistax nissettja dan it-tip ta' kollegament mingħajrha.

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
target: Ebda adattur tan-network ethernet ma nstab fuq is-sistema tiegħek. Jekk jogħġbok ħaddem l-għodda tal-konfigurazzjoni tal-ħardwer.

en: No floppy drive available
target: M'hemmx drajv flopi

en: No floppy drive available!
target: M'hemmx drajv flopi!

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
target: M'hemmx spazju għal bootstrap ta' 1MB. L-installazzjoni se tkompli, imma biex tħaddem is-sistema trid toħloq partizzjoni bootstrap f' Diskdrake.

en: No hard drives found
target: Ebda ħard disk ma nstab!

en: No image found
target: Ebda stampa ma nstabet

en: No kernel selected!
target: Ebda kernel m'hu magħżul!

en: No known driver
target: Ebda drajver magħruf

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target: Ma nstab ebda printer lokali. Biex tinstalla printer manwalment daħħal l-isem tal-port jew fajl fl-input. (Portijiet paralleli: /dev/lp0=LPT1, /dev/lp1=LPT2 eċċ; printers USB: /dev/usb/lp0, /dev/usb/lp1 eċċ)

en: No mouse
target: Ebda maws

en: No net boot images created!
target: Ebda "net boot image" ma nħolqot!

en: No network adapter on your system!
target: Ebda adattur tan-network fuq is-sistema!

en: No network card
target: Ebda kard tan-network

en: No open source driver
target: Ebda drajver sors miftuħ

en: No partition available
target: m'hemmx partizzjonijiet disponibbli

en: No password
target: Ebda password

en: No password aging for
target: Ebda skadenza tal-password għal

en: No password prompt on %s at port %s
target: Ebda prompt għall-password fuq %s, port %s

en: No printer
target: Ebda printer

en: No printer found!
target: Ebda printer ma nstab!

en: No sharing
target: Ebda offerti (sharing)

en: No sound card detected. Try "harddrake" after installation
target: Ebda kard tal-awdjo ma nstabet. Ipprova ħaddem "harddrake" wara l-installazzjoni

en: No tape in %s!
target: Ebda tejp f' %s!

en: No test pages
target: Ebda paġni ta' testjar

en: No, I don't want autologin
target: Le, ma rridx awto-login

en: NoVideo
target: EbdaVideo

en: None
target: Ebda

en: Norfolk Island
target: Gżira Norfolk

en: Normal Mode
target: Modalità normali

en: Normal modem connection
target: Konnessjoni b'modem normali

en: Northern Mariana Islands
target: Gżejjer Mariana tat-Tramuntana

en: Norway
target: Norveġja

en: Norwegian
target: Norveġiż

en: Not connected
target: Mhux imqabbad

en: Not enough free space for auto-allocating
target: M'hemmx biżżejjed spazju għal awto-allokazzjoni

en: Not enough free space to allocate new partitions
target: M'hemmx biżżejjed spazju vojt biex jinħolqu l-partizzjonijiet il-ġodda

en: Not enough partitions for RAID level %d
target: M'hemmx biżżejjed partizzjonijiet għal RAID livell %d

en: Not enough swap space to fulfill installation, please add some
target: M'hemmx biżżejjed swap biex issir l-installazzjoni, jekk jogħġbok żid ftit

en: Not erasable media!
target: Il-medja ma jistax jitħassar

en: Not formatted
target: Mhux formattjat

en: Not installed
target: Mhux installat

en: Not the correct CD label. Disk is labelled %s.
target: Dan is-CD m'għandux it-tikketta tal-volum tajba. Id-diska mmarkata %s.

en: Not the correct tape label. Tape is labelled %s.
target: Dan it-tejp m'għandux it-tikketta tal-volum tajba. It-tejp immarkat %s.

en: Nothing to do
target: M'hemm xejn x'nagħmel

en: Notice
target: Avviż

en: Novell server "%s", printer "%s"
target: Server Novell "%s", printer "%s"

en: November
target: Novembru

en: Now, you can run xawtv (under X Window!) !
target: Issa tista' tħaddem xawtv (taħt l-XWindows)!

en: Number of buttons
target: Numru ta' buttuni

en: Number of capture buffers:
target: Numru ta' buffers għall-kattura :

en: OK to restore the other files.
target: OK biex tirrestawra fajls oħra.

en: OKI winprinter configuration
target: Konfigurazzjoni OKI WinPrinter

en: October
target: Ottubru

en: Office Workstation
target: Kompjuter tal-Uffiċċju

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
target: Programmi tal-uffiċċju: wordprocessors (kword, abiword), spreadsheet (kspread, gnumeric) eċċ

en: Old device file
target: Fajl antik ta' apparat

en: Old user list:
target: Lista antika ta' users:

en: On CD-R
target: fuq CDROM

en: On CUPS server "%s"
target: Fuq server CUPS "%s"

en: On Hard Drive
target: fuq ħard disk

en: On Tape Device
target: Fuq apparat Tejp

en: On boot
target: Malli tixgħel

en: Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame ("Information")
target: Ladarba tagħżel apparat, tista' tara l-informazzjoni dwaru fl-elementi tal-gwarniċ tal-lemin ("Informazzjoni")

en: Open Firmware Delay
target: Stennija Open Firmware

en: Optimize your security by using Mandrake Linux
target: Issettaj sigurtà qawwija

en: Option %s must be a number!
target: Għażla %s trid tkun numru!

en: Option %s must be an integer number!
target: Għażla %s trid tkun numru sħiħ!

en: Option %s out of range!
target: Għażla %s barra mil-limiti!

en: Option ``Restrict command line options'' is of no use without a password
target: L-għażla "irrestrinġi l-għażliet tal-linja tal-kmand" m'għandha ebda effett minngħajr password

en: Options
target: Għażliet

en: Options: %s
target: Għażliet: %s

en: Other
target: Oħrajn

en: Other (not drakbackup) keys in place already
target: Ċifrarji oħrajn (mhux drakbackup) diġà f'posthom

en: Other Graphical Desktops
target: Desktops Grafiċi Oħrajn

en: Other Media
target: Media oħrajn

en: Other OS (MacOS...)
target: OS ieħor (MacOS...)

en: Other OS (SunOS...)
target: OS ieħor (SunOS...)

en: Other OS (windows...)
target: OS ieħor (Windows...)

en: Other ports
target: Portijiet oħrajn

en: Our full range of Linux solutions, as well as special offers on products and other "goodies", are available on our e-store:
target: Varjetà sħiħa ta' soluzzjonijiet bil-Linux, kif ukoll offerti speċjali fuq il-prodotti huma disponibbli online fuq il-ħanut elettroniku tagħna.

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
target: Il-PCMCIA normalment jintuża għal kards tan-network jew modems fuq 
    kompjuters laptop. Dan ma jittellax jekk ma jkunx konfigurat għalhekk 
    m'hux problema jekk tħallih fuq kompjuters li m'għandhomx bżonnu.

en: PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel.
target: Sapport għal PCMCIA m'għadux jeżisti fil-kernels 2.2. Jekk jogħġbok uża kernel 2.4.

en: PDQ - Print, Don't Queue
target: PDQ - Printja minngħajr kju

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
target: PDQ jaċċetta biss printers lokali, printers remoti LPD, u printers Socket/TCP.

en: PLL setting:
target: Seting PLL :

en: POP and IMAP Server
target: Server POP u IMAP

en: Package Group Selection
target: Għażla ta' gruppi ta' pakketti

en: Package selection
target: Għażla ta' pakketti

en: Package:
target: Pakkett:

en: Palau
target: Palaw

en: Paraguay
target: Paragwaj

en: Parameters
target: Parametri

en: Paranoid
target: Paranojku

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
target: Partizzjoni li tibda' impliċitament
        (għad-DOS/Windows, mhux għal-lilo)

en: Partition table of drive %s is going to be written to disk!
target: It-tabella tal-partizzjonijiet tad-diska %s se tinkiteb fuq id-diska.

en: Partition table type: %s
target: Tip ta' tabella tal-partizzjonijiet: %s

en: Partitioning failed: %s
target: Partizzjonament falla: %s

en: Password (again)
target: Password (erġa')

en: Password minimum length and number of digits and upcase letters
target: Tul minimu tal-passwords, u numru ta' figuri u ittri kbar

en: Password required
target: Password meħtieġa

en: Passwords are now enabled, but use as a networked computer is still not recommended.
target: Il-passwords issa huma mixgħula, imma l-użu fuq l-internet jew network xorta m'hux rakkomandat.

en: Path
target: Passaġġ

en: Path or Module required
target: Passaġġ jew modulu meħtieġ

en: Path selection
target: Għażla ta' passaġġ

en: Periodic Checks
target: Ċekkjar perjodiku

en: Permission denied transferring %s to %s
target: Permess miċħud fit-trasferiment ta' %s għal %s

en: Permission problem accessing CD.
target: Problema ta' permessi fl-aċċess tas-CD

en: Permissions
target: Permessi

en: Peru
target: Perù

en: Philippines
target: Filippini

en: Phone number
target: Numru tat-telefon

en: Photo test page
target: Paġna fotografika

en: Pipe job into a command
target: Għaddi x-xogħol lill kmand

en: Please Wait... Applying the configuration
target: Stenna ftit... qed napplika l-konfigurazzjoni

en: Please be sure that the cron daemon is included in your services.
target: Aċċerta li d-daemon "cron" huwa nkluż fis-servizzi.

en: Please check all users that you want to include in your backup.
target: Jekk jogħġbok agħżel il-users kollha li trid tinkludi f'din il-kopja tas-sigurtà.

en: Please choose a language to use.
target: Agħżel liema lingwa trid tuża.

en: Please choose for each step whether it will replay like your install, or it will be manual
target: Jekk jogħġbok agħżel għal kull pass, jekk tridhiex tkun bħal din l-installazzjoni, jew tkunx manwali

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
target: Jekk jogħġbok agħżel "ikteb" jew "aqra" l-għażla tal-pakketti fuq
    flopi. Il-format huwa l-istess bħal diski flopi ġenerati bl-auto_install.

en: Please choose the desired security level
target: Agħżel livell ta' sigurtà mixtieq

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
target: Jekk jogħġbok agħżel l-ewwel numru minn dawn l-għaxra li trid tbiddel, jew agħfas Enter biex tkompli.
    X'tagħżel?

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
target: Jekk jogħġbok agħżel il-port fejn huwa mqabbad il-printer, jew agħżel isem ta' port/fajl fil-linja ta' kmand.

en: Please choose the port that your printer is connected to.
target: Jekk jogħġbok agħżel il-port ma' fejn hu mqabbad il-printer.

en: Please choose the printer to which the print jobs should go or enter a device name/file name in the input line
target: Jekk jogħġbok agħżel il-printer fejn trid tipprintja, jew agħżel isem ta' apparat/fajl fil-linja ta' kmand

en: Please choose the printer to which the print jobs should go.
target: Jekk jogħġbok agħżel il-printer fejn trid tibgħat ix-xogħol ta' printjar.

en: Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Jekk jogħġbok agħżel il-printer li trid tissettja. Il-konfigurazzjoni tal-printer issir awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi konfigurazzjoni personalizzata, ixgħel "Konfigurazzjoni manwali".

en: Please choose the time interval between each backup
target: Jekk jogħġbok agħżel l-intervall ta' ħin għal kull kopja tas-sigurtà

en: Please choose what network adapter will be connected to your Local Area Network.
target: Jekk jogħġbok agħżel liema adattur tan-network se jkun imqabbad man-network lokali (LAN).

en: Please choose what you want to backup
target: Jekk jogħġbok agħżel ta' xiex trid tieħu kopja tas-sigurtà

en: Please choose where you want to backup
target: Jekk jogħġbok agħżel fejn trid tieħu kopja tas-sigurtà

en: Please choose which network adapter you want to use to connect to Internet.
target: Jekk jogħġbok agħżel liema kard tan-network trid tuża biex taqbad ma' l-internet

en: Please choose which serial port your modem is connected to.
target: Jekk jogħġbok agħżel ma' liema port serjali huwa mqabbad il-maws.

en: Please choose which serial port your mouse is connected to.
target: Jekk jogħġbok agħżel il-port serjali li miegħu hemm imqabbad il-maws.

en: Please choose your country.
target: Jekk jogħġbok agħżel il-pajjiż.

en: Please choose your keyboard layout.
target: Jekk jogħġbok agħżel tqassim tat-tastiera.

en: Please choose your mouse type.
target: Jekk jogħġbok agħżel it-tip ta' maws.

en: Please choose your type of mouse.
target: Jekk jogħġbok agħżel it-tip tal-maws.

en: Please click on a partition
target: Jekk jogħġbok klikkja fuq partizzjoni

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
target: Jekk jogħġbok daħħal il-konfigurazzjoni IP għal dan il-kompjuter.
    Kull element huwa indirizz IP fil-format deċimali bit-tikek (eż, 1.2.3.4).

en: Please enter the WebDAV server URL
target: Jekk jogħġbok daħħal il-URL tas-server WebDAV

en: Please enter the name of the interface connected to the internet.
    
    Examples:
    		ppp+ for modem or DSL connections, 
    		eth0, or eth1 for cable connection, 
    		ippp+ for a isdn connection.
target: Jekk jogħġbok agħżel l-isem tal-interfaċċja mqabbda mal-internet.
    
    Eżempji:
    		ppp+ għal modem jew konnessjoni DSL, 
    		eth0, jew eth1 għal konnessjoni bil-cable, 
    		ippp+ għal konnessjoni isdn.

en: Please enter your email address below
target: Jekk jogħġbok daħħal l-indirizz tal-imejl taħt

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
target: Jekk jogħġbok daħħal l-isem tal-kompjuter.
    Dan irid ikun isem sħiħ, bħal "joe.linux.org.mt".
    Tista' wkoll iddaħħal l-indirizz IP tal-gateway, jekk għandek wieħed.

en: Please enter your username, password and domain name to access this host.
target: Jekk jogħġbok daħħal il-user, password u dominju biex taċċessa dan il-kompjuter

en: Please fill or check the field below
target: Jekk jogħġbok imla' jew iċċekkja l-elementi t'hawn taħt

en: Please give a user name
target: Jekk jogħġbok agħti isem ta' user

en: Please indicate where the auto_install.cfg file is located.
    
    Leave it blank if you do not want to set up automatic installation mode.
target: Indika fejn qiegħed il-fajl auto_install.cfg.
    
    Ħallih vojt jekk ma tridx tissettja l-installazzjoni awtomatizzata.

en: Please insert floppy disk:
target: Jekk jogħġbok daħħal flopi:

en: Please insert the Boot floppy used in drive %s
target: Jekk jogħġbok daħħal "boot flopi" fid-drajv %s

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
target: Jekk jogħġbok daħħal is-CD tal-installazzjoni fid-drajv u agħfas Ok meta
    tlesti. Jekk m'għandekx is-CD agħfas "Ikkanċella" biex tevita l-aġġornament.

en: Please insert the Update Modules floppy in drive %s
target: Jekk jogħġbok daħħal "update modules floppy" fid-drajv %s

en: Please log out and then use Ctrl-Alt-BackSpace
target: Jekk jogħġbok oħroġ mid-desktop u agħfas Ctrl-Alt-Backspace

en: Please make a backup of your data first
target: Ħu kopja tad-data kollha qabel tkompli

en: Please select data to backup...
target: Jekk jogħġbok agħżel informazzjoni x'tikkopja

en: Please select data to restore...
target: Jekk jogħġbok agħżel informazzjoni x'tirrestawra

en: Please select media for backup...
target: Jekk jogħġbok agħżel Media għall-kopja tas-sigurtà...

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
target: Jekk jogħġbok agħżel il-port it-tajjeb. Per eżempju, il-port "COM1" fil-
    Windows huwa ekwivalenti għal "ttyS0" fil-GNU/Linux.

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
target: Jekk jogħġbok agħżel il-paġni li trid tipprintja biex tittestja.
    Nota: Il-paġna fotografika tista' tieħu ħafna ħin biex tlesti, u fuq laser printers bi ftit memorja tista' anqas tipprintja. F'ħafna każi huwa biżżejjed li tipprintja l-paġna standard.

en: Please test the mouse
target: Jekk jogħġbok ittestja l-maws

en: Please try again
target: Erġa' pprova

en: Please uncheck or remove it on next time.
target: Jekk jogħġbok neħħiha d-darba li jmiss.

en: Please wait
target: Stenna ftit

en: Please wait, preparing installation...
target: Stenna ftit, qed nipprepara l-installazzjoni

en: Please wait, setting security level...
target: Stenna ftit.. qed jissettja l-livell ta' sigurtà...

en: Please wait, setting security options...
target: Stenna ftit.. qed jissettja l-għażliet ta' sigurtà...

en: Please,
    type in your tv norm and country
target: Jekk jogħġbok,
    daħħal l-istandard televiżiv u l-pajjiż

en: Please, choose your keyboard layout.
target: Jekk jogħġbok, agħżel it-tqassim tat-tastiera.

en: Plug'n Play probing failed. Please select the correct monitor
target: Analiżi Plug'n'play falliet. Jekk jogħġbok agħżel monitur speċifiku

en: Poland
target: Polonja

en: Polish
target: Pollakk

en: Polish (qwerty layout)
target: Pollakk (qwerty)

en: Polish (qwertz layout)
target: Pollakk (qwertz)

en: Poor
target: Ftit li xejn

en: Portugal
target: Portugall

en: Portuguese
target: Portugiż

en: Post Install
target: Wara l-installazzjoni

en: Post Uninstall
target: Wara t-tneħħija

en: Post-install configuration
target: Konfigurazzjoni ta' wara l-installazzjoni

en: Postfix Mail Server
target: Server tal-imejl Postfix

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
target: Postfix huwa aġent tat-trasport tal-imejl, ċioè programm li jgħaddi imejls minn kompjuter għall-ieħor.

en: Postfix mail server
target: Server tal-imejl Postfix

en: PostgreSQL or MySQL database server
target: Server tad-database PostgreSQL jew MySQL

en: Potential LAN address conflict found in current config of %s!
target: Possibbilment hemm konflitt fl-indirizz LAN fil-konfigurazzjoni ta' %s!

en: Precise RAM size if needed (found %d MB)
target: Daqs eżatt ta' memorja jekk meħtieġ (sibt %d RAM)

en: Preference:
target: Preferenzi:

en: Preferences
target: Preferenzi

en: Preparing bootloader...
target: Qed nipprepara l-bootloader

en: Preparing installation
target: Qed nipprepara l-installazzjoni

en: Preparing printer database...
target: Qed nipprepara d-database tal-printers...

en: Press enter to boot the selected OS, 'e' to edit the
target: Aghfas Enter biex tibda' s-sistema operattiva mmarkata, 'e' biex tbiddel

en: Preview
target: previżjoni

en: Print
target: Printja

en: Print Queue Name
target: Isem tal-Kju tal-Ipprintjar

en: Print option list
target: Lista ta' għażliet tal-printer

en: Print test pages
target: Nipprintja paġni biex nittestja

en: Printer "%s" on SMB/Windows server "%s"
target: Printer "%s" fuq server SMB/Windows "%s"

en: Printer "%s" on server "%s"
target: Printer "%s" fuq server "%s"

en: Printer %s
    What do you want to modify on this printer?
target: Printer %s
    Xi trid tagħmel b'dan il-printer?

en: Printer Device URI
target: URI tal-printer

en: Printer Name
target: Isem tal-printer

en: Printer Server
target: Server tal-printer

en: Printer auto-detection
target: Għarfien awtomatiku tal-printer

en: Printer auto-detection (Local, TCP/Socket, and SMB printers)
target: Għarfien awtomatiku tal-printer (printers lokali, TCP/socket u SMB/Windows)

en: Printer connection type
target: Tip ta' konnessjoni tal-printer

en: Printer default settings
target: Għażla impliċiti tal-printer

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
target: Setings impliċiti tal-printer
    
    Aċċerta li d-daqs tal-paġna u t-tip ta' inka/ipprintjar (jekk hemm) kif ukoll il-konfigurazzjoni tal-ħardwer tal-printer (memorja, unità dupleks, kxaxen ekstra) huma ssettjati sew. Innota li jekk tagħżel kwalità/reżoluzzjoni għolja ħafna l-ipprintjar jista' jdum ħafna iżjed u/jew juża iżjed inka.

en: Printer host name or IP
target: Isem jew indirizz tal-printer

en: Printer host name or IP missing!
target: Isem jew indirizz tal-printer nieqes!

en: Printer manufacturer, model
target: Ditta u mudell tal-printer

en: Printer manufacturer, model, driver
target: Ditta, mudell u drajver tal-printer

en: Printer model selection
target: Għażla tal-mudell tal-printer

en: Printer name, description, location
target: Isem, deskrizzjoni u fejn qiegħed il-printer

en: Printer on NetWare server
target: Printer fuq server NetWare

en: Printer on SMB/Windows 95/98/NT server
target: Printer fuq SMB/Windows 95/98/NT

en: Printer on parallel port #%s
target: Printer fuq port parallel #%s

en: Printer on remote CUPS server
target: Printer fuq server CUPS remot

en: Printer on remote lpd server
target: Printer fuq server lpd remot

en: Printer options
target: Għażliet tal-printer

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
target: Printerdrake qabbel l-isem tal-mudell li jirriżulta mill-għarfien tal-printer mal-mudelli llistjati fid-database sabiex isib l-aħjar għażla. Din l-għażla tista' tkun ħażina, speċjalment jekk il-printer anqas jinsab f'din il-lista. Għalhekk iċċekkja jekk din l-għażla hix tajba u agħfas "Dan il-mudell huwa tajjeb" jekk iva, u jekk le agħfas "Agħżel mudell manwalment" biex tagħżel mudell inti fl-iskrin li jmiss.
    
    Għall-printer tiegħek Printerdrake sab:
    
    %s

en: Printing
target: Printjar

en: Printing on the printer "%s"
target: Printjar fuq printer "%s"

en: Printing test page(s)...
target: Qed nipprintja paġna/i ta' test...

en: Printing/Photo Card Access on "%s"
target: Printjar/kard fotografija fuq "%s"

en: Printing/Scanning on "%s"
target: Printjar/skannjar fuq "%s"

en: Printing/Scanning/Photo Cards on "%s"
target: Kards ta' printjar/skannjar/fotografija fuq "%s"

en: Problems installing package %s
target: Problemi fl-installazzjoni tal-pakkett %s

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.
target: Instabu xi problemi waqt il-konfigurazzjoni.
    Ittestja l-konnessjoni permezz ta' net_monitor jew mcc. Jekk il-konnessjoni ma taħdimx, tista' terġa' tħaddem il-konfigurazzjoni.

en: Processor ID
target: ID tal-proċessatur

en: Processors
target: Proċessaturi

en: Profile to delete:
target: Profil xi tħassar:

en: Profile:
target: Profil:

en: ProgressBar color selection
target: Għażla kulur tal-kaxxa tal-progress

en: Property
target: Propjetà

en: Protocol
target: Protokoll

en: Protocol for the rest of the world
target: Protokoll għall-kumplament tad-dinja

en: Protocol for the rest of the world
    No D-Channel (leased lines)
target: Protokoll għall-kumplament tad-dinja
     ebda kanal D (leased line)

en: Provider dns 1 (optional)
target: DNS 1 tal-ISP (opzjonali)

en: Provider dns 2 (optional)
target: DNS 2 tal-ISP (opzjonali)

en: Provider name (ex provider.net)
target: Isem tal-ISP (eż. provider.net)

en: Provider phone number
target: Telefon tal-ISP

en: Proxies configuration
target: Konfigurazzjoni tal-proxies

en: Proxy should be http://...
target: Proxy mistenni jibda' http://

en: Quit
target: Noħroġ

en: Quit without saving
target: Oħroġ minngħajr ma tikteb

en: Quit without writing the partition table?
target: Trid toħroġ minngħajr ma tikteb it-tabella tal-partizzjonijiet?

en: RAID-disks %s
target: Diski RAID %s

en: Radio support:
target: Sapport għar-radju :

en: Raw printer
target: Printer dirett

en: Raw printer (No driver)
target: Printer dirett (bla drajver)

en: Re-configure interface and DHCP server
target: Erġa' kkonfigura l-interfaċċja u s-server DHCP

en: Re-generating list of configured scanners ...
target: Qed terġa' tiġi ġenerata lista ta' skaners konfigurati...

en: Re-submit
target: Erġa' ssottometti

en: Read
target: Qari

en: Read carefully!
target: Aqra sew!

en: Read-only
target: Jinqara biss

en: Read-write
target: Ikteb-aqra

en: Reading printer data...
target: Qed jinqara informazzjoni dwar printer...

en: Reading printer database...
target: Qed jinqara d-database ta' printers

en: Real name
target: Isem veru

en: Refresh
target: Erġa' tella'

en: Refresh printer list (to display all available remote CUPS printers)
target: Erġa' aqra l-lista ta' printers (biex issib printers remoti CUPS)

en: Refresh the list
target: Erġa' tella' l-lista

en: Refreshing printer data...
target: Qed nerġa' naqra' l-printers...

en: Refuse
target: Ma naċċettax

en: Release:
target: Ħarġa:

en: Reload partition table
target: Erġa' aqra t-tabella ta' partizzjonijiet

en: Remember this password
target: Ftakar dan il-password

en: Remote Administration
target: Amministrazzjoni remota

en: Remote CUPS server
target: Server CUPS remot

en: Remote Control
target: Kontroll remot

en: Remote host name
target: Isem tal-kompjuter remot

en: Remote host name missing!
target: Isem tal-kompjuter remot nieqes!

en: Remote lpd Printer Options
target: Għażliet għal printer lpd remot

en: Remote printer
target: Printer remot

en: Remote printer name
target: Isem tal-printer remot

en: Remote printer name missing!
target: Isem tal-printer remot nieqes!

en: Removable media automounting
target: Awtomuntar ta' diski li jinħarġu

en: Remove List
target: Neħħi lista

en: Remove Selected
target: Neħħi l-magħżula

en: Remove Windows
target: Neħħi l-Windows

en: Remove Windows(TM)
target: Neħħi l-Windows(TM)

en: Remove a module
target: Neħħi modulu

en: Remove fonts on your system
target: Neħħi fonts mis-sistema

en: Remove from LVM
target: Neħħi mill-LVM

en: Remove from RAID
target: Neħħi mir-RAID

en: Remove printer
target: Neħħi printer

en: Remove selected host/network
target: Neħħi l-kompjuter/network magħżul

en: Remove selected server
target: Neħħi s-server magħżul

en: Remove the last item
target: Neħħi l-aħħar element

en: Remove the logical volumes first
target: L-ewwel neħħi l-volumi loġiċi minn ġo fih

en: Remove the loopback file?
target: Trid tneħħi l-fajl ta' loopback?

en: Remove this printer from Star Office/OpenOffice.org/GIMP
target: Neħħi dan il-printer minn StarOffice/OpenOffice

en: Remove user directories before restore.
target: Neħħi d-direttorji tal-users qabel tirrestawra.

en: Removing %s
target: Qed inneħħi %s

en: Removing old printer "%s"...
target: Qed inneħħi l-printer antik "%s"...

en: Removing printer "%s"...
target: Qed jitneħħa l-printer "%s"...

en: Removing printer from Star Office/OpenOffice.org/GIMP
target: Qed jitneħħa printer minn StarOffice/OpenOffice

en: Report
target: Rapport

en: Report check result to syslog
target: Irrapporta r-riżultat lis-syslog

en: Report unowned files
target: Irrapporta fajls bla sid

en: Rescue partition table
target: Salva tabella ta' partizzjonijiet

en: Reselect correct fonts
target: Erġa' agħżel fonts tajbin

en: Resize
target: Ibdel daqs

en: Resizing
target: Qed nibdel id-daqs

en: Resizing Windows partition
target: Qed nikkalkula l-limiti tal-filesystem tal-Windows

en: Resolution
target: Reżoluzzjoni

en: Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
target: Reżoluzzjoni
    
       Hawn tista' tagħżel ir-reżoluzzjoni u numru ta' kuluri disponibbli fuq 
    il-ħardwer tiegħek. Agħżel dak li l-aħjar jaqdi ħtiġijietek (għalkemm tista' 
    tibdel l-għażliet tiegħek wara). Kampjun tal-konfigurazzjoni magħżula 
    jintwera fuq l-iskrin.

en: Resolution: %s
target: Reżoluzzjoni: %s

en: Resolutions
target: Reżoluzzjonijiet

en: Restart XFS
target: Irristartja XFS

en: Restarting printing system...
target: Qed nirristartja s-sistema ta' printjar...

en: Restore
target: Irrestawra

en: Restore Failed...
target: Restawr falla...

en: Restore From CD
target: Irrestawra mis-CD

en: Restore From Catalog
target: Irrestawra mill-katalgu

en: Restore From Tape
target: Irrestawra mit-tejp

en: Restore Other
target: Irrestawra ieħor

en: Restore Progress
target: Progress tar-restawr

en: Restore Selected
    Catalog Entry
target: Irrestawra l-element
    magħżul tal-katalgu

en: Restore Selected
    Files
target: Irrestawra l-fajls
    magħżula

en: Restore Users
target: Irrestawra users

en: Restore Via Network
target: Irrestawra permezz tan-network

en: Restore Via Network Protocol: %s
target: Irrestawra permezz tal-protokoll tan-network: %s

en: Restore all backups
target: Irrestawra l-kopji tas-sigurtà kollha

en: Restore from Hard Disk.
target: Irrestawra mill-ħard disk

en: Restore partition table
target: Erġa' tella' tabella ta' partizzjonijiet

en: Restore system
target: Irrestawra sistema

en: Restoring from file %s failed: %s
target: Restawr minn fajl %s falliet: %s

en: Restrict command line options
target: Irrestrinġi l-għażliet tal-linja tal-kmand

en: Right "Windows" key
target: Buttuna "Windows" tal-lemin

en: Right Alt key
target: Buttuna Alt leminija

en: Right Control key
target: Buttuna Ctrl leminija

en: Right Shift key
target: Buttuna Shift leminija

en: Romania
target: Rumanija

en: Romanian (qwerty)
target: Rumen (qwerty)

en: Romanian (qwertz)
target: Rumen (qwertz)

en: Root partition size in MB:
target: Daqs tal-partizzjoni root f' MB:

en: Run "sndconfig" after installation to configure your sound card
target: Ħaddem "sndconfig" wara l-installazzjoni biex tikkonfigura l-kard awdjo.

en: Run config tool
target: Ħaddem għodda ta' konfigurazzjoni

en: Run the daily security checks
target: Ħaddem it-testijiet ta' sigurtà ta' kuljum

en: Running "%s" ...
target: Qed jitħaddem "%s"...

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
target: Iħaddem kmandijiet li jiġu appuntati mill-kmand "at" fil-ħin speċifikat
    meta tħaddem "at", u jħaddem programmi meta t-tagħbija tas-sistema tkun
    baxxa biżżejjed.

en: Russian
target: Russu

en: Russian (Phonetic)
target: Russu (fonetiku)

en: SECURITY WARNING!
target: TWISSIJA TA' SIGURTÀ!

en: SILO Installation
target: Installazzjoni SILO

en: SMB (Windows 9x/NT) Printer Options
target: Għażliet għal printer SMB (Windows 9x/NT)

en: SMB server IP
target: IP tas-server SMB

en: SMB server host
target: Isem tal-kompjuter SMB

en: SMB/Windows server "%s", share "%s"
target: Server Windows/SMB "%s", share "%s"

en: SSH Server
target: Server SSH

en: Saint Helena
target: Santa Liena

en: Saint Kitts and Nevis
target: San Kitts u Nevis

en: Saint Lucia
target: Santa Luċija

en: Saint Pierre and Miquelon
target: San Pierre u Miquelon

en: Saint Vincent and the Grenadines
target: San Vinċenz u l-Grenadini

en: Samba Server
target: Server Samba

en: Samba share name missing!
target: Isem tal-printer (share name) nieqes!

en: Sao Tome and Principe
target: Sao Tome u Principe

en: Saturday
target: is-Sibt

en: Saudi Arabia
target: Għarabja Sawdita

en: Save
target: Ikteb

en: Save as..
target: Ikteb b'isem ġdid...

en: Save on floppy
target: Ikteb fuq flopi

en: Save packages selection
target: Ikteb l-għażla ta' pakketti

en: Save partition table
target: Ikteb it-tabella ta' partizzjonijiet

en: Save theme
target: ikteb tema

en: Saves and restores system entropy pool for higher quality random
    number generation.
target: Jikteb u jirrestawra blokka ta' entropija għall-ġenerazzjoni ta' 
    numri bil-polza iżjed randomi.

en: Scanner
target: Skaner

en: Scanner sharing
target: Qsim ta' skaner

en: Scanner sharing to hosts:
target: Offerta ta' skaner ma' kompjuters:

en: Scanning for TV channels
target: Qed infittex stazzjonijiet tat-TV

en: Scanning for TV channels in progress ...
target: Tfittix għal stazzjonijiet tat-TV għaddej

en: Scanning network...
target: Qed infittex fuq in-network...

en: Scanning on your HP multi-function device
target: Skannjar fuq l-apparat multi-funzjoni HP

en: Scanning partitions to find mount points
target: Qed niskannja partizzjonijiet biex insib punti ta' mmuntar

en: Scientific Workstation
target: Xjentifiku

en: Scientific applications such as gnuplot
target: Programmi xjentifiċi bħal gnuplot

en: Screenshots will be available after install in %s
target: Ir-ritratti jkunu disponibbli wara l-installazzjoni f' %s

en: Script-based
target: Ibbażat fuq skritti

en: Search Backups
target: Fittex kopji ta' sigurtà

en: Search for files to restore
target: Fittex fajls biex tirrestawra

en: Search for fonts in installed list
target: Fittex fonts fil-lista ta' nstallati

en: Search installed fonts
target: Fittex fonts installati

en: Search servers
target: Fittex servers

en: Search:
target: Fittex:

en: Second DNS Server (optional)
target: It-tieni server DNS (opzjonali)

en: Second floppy drive
target: It-tieni drajv tal-flopi

en: Sector
target: Settur

en: Secure your networks with the Multi Network Firewall
target: Assikura n-networks permezz ta' Multi Network Firewall

en: Security
target: Sigurtà

en: Security Administrator (login or email)
target: Amministratur tas-sigurtà (login jew imejl)

en: Security Administrator:
target: Amministratur tas-sigurtà:

en: Security Alerts:
target: Allerti ta' sigurtà:

en: Security Level:
target: Livell ta' sigurtà:

en: Security level
target: Livell ta' sigurtà

en: See hardware info
target: Ara info. dwar ħardwer

en: Select Printer Connection
target: Agħżel konnessjoni tal-printer

en: Select Printer Spooler
target: Agħżel "spooler" tal-printer

en: Select a device !
target: Agħżel apparat

en: Select another media to restore from
target: Agħżel medja ieħor biex tirrestawra minnu

en: Select file
target: Agħżel fajl

en: Select installation class
target: Agħżel klassi ta' installazzjoni

en: Select model manually
target: Agħżel mudell manwalment

en: Select the files or directories and click on 'OK'
target: Agħżel fajls jew direttorju u klikkja "OK"

en: Select the font file or directory and click on 'Add'
target: Agħżel il-fajl tal-font jew direttorju u agħfas "Żid"

en: Select the memory size of your graphics card
target: Agħżel id-daqs tal-memorja tal-kard tal-grafika

en: Select user manually
target: Agħżel user manwalment

en: Select your provider.
    If it isn't listed, choose Unlisted.
target: Agħżel provider.
     Jekk m'hux fil-lista, agħżel "mhux imniżżel"

en: Selected All
target: Kollox magħżul

en: Selected size is larger than available space
target: Id-daqs tal-għażla huwa ikbar mill-ispazju disponibbli

en: Send mail report after each backup to:
target: Ibgħat rapport bl-imejl wara kull kopja tas-sigurtà lill:

en: Sending Speed:
target: Rata 'il barra:

en: Sending files...
target: Qed nibgħat fajls...

en: Senegal
target: Senegall

en: September
target: Settembru

en: Serbian (cyrillic)
target: Serb (ċirilliku)

en: Server Name
target: Isem is-server

en: Services
target: Servizzi

en: Services and deamons
target: Servizzi u daemons

en: Services: %d activated for %d registered
target: Servizzi: %d imtella' għal %d reġistrati

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
target: Sett għodda biex taqra u tibgħat imejl u "news", u biex tibbrawżja l-web

en: Set of tools to read and send mail and news and to browse the Web
target: Sett għodda biex taqra u tibgħat imejl u "news", u biex tibbrawżja l-web

en: Set password expiration and account inactivation delays
target: Issettja l-iskandeza tal-password u dewmien fl-inattivazzjoni ta' kont

en: Set root password
target: Issettja l-password ta' "root"

en: Set the root umask.
target: Issettja umask ta' root.

en: Set this printer as the default
target: Nissettja dan bħala l-printer impliċitu

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
target: Issettja s-server tal-Windows biex jagħmel dan il-printer disponibbli taħt il-protokoll IPP u ssettja l-ipprintjar minn din il-magna biex tuża l-konnessjoni tip "%s" minn Printerdrake.

en: Settings
target: Setings

en: Share name
target: Isem tal-printer (share)

en: Shell history size
target: Daqs tal-kronoloġija tax-shell

en: Show automatically selected packages
target: Uri l-pakketti magħżula awtomatikament

en: Show current interface configuration
target: Uri l-konfigurazzjoni kurrenti tal-interfaċċja

en: Show only for the selected day
target: Uri għall-ġurnata magħżula biss

en: Singapore
target: Singapor

en: Size
target: Daqs

en: Size in MB:
target: Daqs f' MB:

en: Size: %s
target: Daqs: %s

en: Size: %s
target: Daqs: %s

en: Skip
target: Aqbeż

en: Slovakia
target: Slovakkja

en: Slovakian (QWERTY)
target: Slovakk (QWERTY)

en: Slovakian (QWERTZ)
target: Slovakk (QWERTZ)

en: Slovenia
target: Slovenja

en: Slovenian
target: Sloven

en: Software Manager
target: Maniġġjar tas-softwer

en: Solomon Islands
target: Gżejjer Solomon

en: Somalia
target: Somalija

en: Some devices in the "%s" hardware class were removed:
target: Xi apparat fil-klassi tal-ħardwer "%s" tneħħew:

en: Some devices were added:
target: Xi apparat ġew miżjuda:

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
target: Xi apparat fil-kompjuter tiegħek jeħtieġ drajvers speċjali biex jaħdem.
    Tista' ssib iżjed informazzjoni dwarhom fuq: %s

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
target: Xi pakketti importanti ma ġewx installati sew.
    Jew id-drajv tas-CDROM, jew is-CD nnifisha huma difettużi.
    Tista' tiċċekkja s-CD fuq kompjuter diġà nstallat permezz tal-kmand "rpm -qpl Mandrake/RPMS/*.rpm"

en: Some steps are not completed.
    
    Do you really want to quit now?
target: Xi passi ma ġewx finalizzati.
    
    Trid toħroġ issa?

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random, corrupted data.
target: Qed jiġri xi ħaġa ħażina fuq il-ħard disk.
    It-test biex niċċekkja l-integrità tal-informazzjoni falla.
    Dan ifisser li kull ma tikteb fuq id-diska jista' jispiċċa mimli mbarazz.

en: Something went wrong! - Is mkisofs installed?
target: Kien hemm xi problema! - mkisofs huwa nstallat?

en: Sorry, no floppy drive available
target: Jiddispjaċini, ebda drajv flopi disponibbli

en: Sorry, we support only 2.4 kernels.
target: Jiddispjaċini, aħna nissapportjaw biss kernels 2.4.

en: Sound and video playing/editing programs
target: Programmi għad-daqq u editjar ta' awdjo u video

en: Sound card
target: Kard awdjo

en: Sound configuration
target: Konfigurazzjoni tal-awdjo

en: Sound trouble shooting
target: Sib problemi fl-awdjo

en: Soundcard
target: Kard awdjo

en: South Africa
target: Afrika t'Isfel

en: Spain
target: Spanja

en: Spanish
target: Spanjol

en: Specify options
target: Speċifika informazzjoni

en: Splash selection
target: Agħżel stampa tal-boot

en: Standalone Tools
target: Għodda indipendenti

en: Standard test page
target: Paġna standard

en: Start
target: Ibda

en: Start Server
target: Startja server

en: Start at boot
target: Tella' fil-bidu

en: Start sector:
target: Settur tal-bidu:

en: Start when requested
target: Tella' meta meħtieġ

en: Start: sector %s
target: Bidu: settur %s

en: Started on boot
target: Tella' fil-bidu

en: Starting network...
target: Qed nibda' n-network...

en: Starting the printing system at boot time
target: Qed nistartja s-sistema ta' printjar waqt ix-xegħil

en: Starts the X Font Server (this is mandatory for XFree to run).
target: Itella' l-"X Font Server" (dan huwa meħtieġ biex jaħdem l-XFree).

en: State
target: Stat

en: Statistics
target: Statistika

en: Status:
target: Stat:

en: Stop
target: Ieqaf

en: Stop Server
target: Waqqaf server

en: Store the password for this system in drakbackup configuration.
target: Żomm il-password għal din is-sistema fil-konfigurazzjoni drakbackup.

en: Sulogin(8) in single user level
target: Sulogin(8) f'livell single user

en: Summary
target: Sommarju

en: Sun - Mouse
target: Maws - Sun

en: Sunday
target: il-Ħadd

en: Support the OKI 4w and compatible winprinters.
target: Jippermetti l-użu tal-Oki4w "win-printer" jew kompatibbli

en: Suppress Fonts Files
target: Issopprimi fajls ta' fonts

en: Suppress Temporary Files
target: Issopprimi fajls temporanji

en: Suriname
target: Surinam

en: Svalbard and Jan Mayen Islands
target: Gżejjer Svalbard u Jan Mayen

en: Swap partition size in MB:
target: Daqs tal-partizzjoni Swap f' MB:

en: Swaziland
target: Swazilandja

en: Sweden
target: Svezja

en: Swedish
target: Svediż

en: Swiss (French layout)
target: Svizzeru (tqassim Franċiż)

en: Swiss (German layout)
target: Svizzeru (tqassim Ġermaniż)

en: Switching from ext2 to ext3
target: Qed nibdel minn ext2 għal ext3

en: Switzerland
target: Svizzera

en: Synchronization tool
target: Għodda tas-sinkronizzazzjoni

en: Syriac
target: Sirjakk

en: Syriac (phonetic)
target: Sirjakk (fonetiku)

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
target: Syslog huwa faċilità li permezz tagħha d-daemons jistgħu iżommu
    log ta' messaġġi. Dejjem huwa rakkomandat li tħaddem 'is-syslog.

en: System
target: Sistema

en: System Options
target: Għażliet tas-sistema

en: System mode
target: Modalità sistema

en: System settings
target: Setings tas-sistema

en: TCP/IP host "%s", port %s
target: Server TCP/IP "%s", port "%s"

en: TCP/Socket Printer Options
target: Għażliet Printer TCP/Socket

en: TV card
target: Kard TV

en: TV norm:
target: Standard televiżiv :

en: Table
target: Tabella

en: Tajik keyboard
target: Taġik

en: Tajikistan
target: Taġikistan

en: Tape
target: Tejp

en: Terminal-based
target: Ibbażat fuq terminal

en: Test
target: Ittestja

en: Test of the configuration
target: Test tal-konfigurazzjoni

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
target: Il-paġna/i intbagħatu fuq il-printer.
    Jista' jgħaddi xi ftit ħin qabel jibda' l-printjar.

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
target: Il-paġna/i intbagħatu fuq il-printer.
    Jista' jgħaddi xi ftit ħin qabel jibda' l-printjar.
    Status tal-printjar:
    %s

en: Test pages
target: Paġni biex tittestja

en: Testing your connection...
target: Qed nittestja l-kollegament...

en: Thai keyboard
target: Tajlandiż

en: Thailand
target: Tajlandja

en: Thank you for choosing Mandrake Linux 9.2
target: Grazzi talli għażilt Mandrake Linux 9.2

en: The %s is not supported by this version of Mandrake Linux.
target: "%s" m'hux sapportjat minn din il-verżjoni ta' Mandrake Linux.

en: The %s must be configured by printerdrake.
    You can launch printerdrake from the Mandrake Control Center in Hardware section.
target: %s irid jiġi konfigurat minn printerdrake.
    Tista' tħaddem lill printerdrake miċ-Ċentru tal-Kontroll Mandrake fis-sezzjoni Ħardwer.

en: The DHCP start ip
target: L-indirizz tal-bidu DHCP

en: The DrakX Partitioning wizard found the following solutions:
target: Is-saħħar ta' partizzjonament DrakX sab dawn is-soluzzjonijiet:

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
target: Il-programm biex tibdel id-daqs ta' partizzjoni FAT m'hux
    kapaċi tbiddel din il-partizzjoni - instabet din il-problema:
    %s

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
target: K Desktop Environment, l-interfaċċja grafika bażi, b'għażla ta' għodda jakkumpanjawha

en: The Local Network did not finish with `.0', bailing out.
target: In-network lokali ma jispiċċax b' ".0", ħiereġ 'il barra.

en: The Mandrake Linux installation is distributed on several CD-ROMs. DrakX
    knows if a selected package is located on another CD-ROM so it will eject
    the current CD and ask you to insert the correct CD as required.
target: L-installazzjoni ta' Mandrake Linux hija maqsuma fuq diversi CD-ROMs. DrakX
    jaf jekk pakkett partikulari hux qiegħed fuq CD-ROM oħra u jiftaħ is-CD u 
    jindikalek biex iddaħħal li jmiss skond il-ħtieġa.

en: The URL must begin with http:// or https://
target: Il-URL irid jibda' b' http:// jew https://

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
target: L-awto-installazzjoni tista' tkun totalment awtomatizzata
    jekk trid. F'dak il-każ tieħu l-ħard disk kollu!!
    (dan huwa ntenzjonat għal installazzjoni fuq kompjuter ġdid)
    
    Forsi tippreferi tuża "replay" tal-installazzjoni.

en: The backup partition table has not the same size
    Still continue?
target: Il-kopja tat-tabella tal-partizzjonijiet m'għandiex l-istess daqs.
    Tkompli xorta?

en: The change is done, but to be effective you must logout
target: Il-bidliet saru, imma biex ikunu effettivi trid tilloggja 'l barra

en: The change is done, do you want to restart the dm service ?
target: Il-bidliet saru; trid tirristartja s-servizz dm?

en: The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Il-konfigurazzjoni tal-printer jaħdem sew awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi konfigurazzjoni personalizzata, ixgħel "Konfigurazzjoni manwali".

en: The creation of the boot floppy has been successfully completed
target: Il-ħolqien ta' flopi għall-boot irnexxa

en: The current security level is %s
    Select permissions to see/edit
target: Il-livell ta' sigurtà huwa %s
    Agħżel permessi li trid tara/tibdel

en: The encryption keys do not match
target: Iċ-ċifrarji ma jaqblux

en: The entered IP is not correct.
target: L-IP li daħħalt mhux tajjeb.

en: The floppy has been successfully generated.
    You may now replay your installation.
target: Il-flopi ġie ġenerat kif mitlub.
    Issa tista' tirrepeti l-installazzjoni.

en: The following options can be set to customize your
    system security. If you need an explanation, look at the help tooltip.
target: Dawn l-għażliet jistgħu jintużaw biex tippersonalizza s-
    sigurtà tas-sistema. Jekk trid spjegazzjoni, ara l-ħjiel "popup"

en: The following packages are going to be installed
target: Dawn huma l-pakketti li se jiġu nstallati

en: The following packages are going to be removed
target: Dawn huma l-pakketti li se jiġu mneħħija

en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
target: Dawn il-pakketti se jitneħħew biex iħalluk taġġorna s-sistema: %s
    
    
    Żgur li trid tneħħi dawn il-pakketti?

en: The following printer
    
    %s%s
    are directly connected to your system
target: Dan il-printer
    
    %s%s
    huwa mqabbad direttament mal-kompjuter

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
target: Dawn huma l-printers ikkonfigurati. Klikkja-doppju fuq printer biex tbiddillu l-konfigurazzjoni, biex tissettjah bħala printer impliċitu, jew tara informazzjoni dwaru.

en: The following scanner
    
    %s
    is available on your system.
target: L-iskaner
    
    %s 
    huwa disponibbli fuq is-sistema.

en: The following scanners
    
    %s
    are available on your system.
target: Dawn l-iskaners
    
    %s
    huma disponibbli fuq is-sistema tiegħek.

en: The highlighted entry will be booted automatically in %d seconds.
target: L-ghazla mmarkata se tinbeda' awtomatikament f' %d sekondi

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
target: Il-drajvers tal-printer ipprovduti minn Lexmark jissapportjaw biss printers lokali, mhux printers fuq magni remoti jew print servers. Jekk jogħġbok qabbad il-printer ma' port lokali jew ikkonfigurah fuq il-magna fejn qiegħed imqabbad.

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
target: Id-daemon tal-internet "superserver" (magħruf bħala inetd) itella'
    varjetà ta' servizzi oħra tal-internet skond il-ħtieġa. Huwa responsabbli
    li jtella' diversi servizzi, inkluż telnet, ftp, rsh u rlogin. Jekk tneħħi
    lill-inetd tkun neħħejt is-servizzi kollha tiegħu.

en: The model is correct
target: Dan il-mudell huwa tajjeb

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few use dhcp.
    If you don't know, choose 'use pppoe'
target: F'Malta, il-metodu li jintuża biex taqbad mal-ADSL huwa
    pptp, f'pajjiżi oħra l-iżjed metodu komuni huwa pppoe, 
    filwaqt li wħud jużaw dhcp.

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
target: L-aċċess għan-network ma kienx qed jaħdem u ma setax jittella'. Jekk jogħġbok iċċekkja l-konfigurazzjoni tal-ħardwer, imbagħad erġa' pprova kkonfigura l-printer remot.

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
target: Il-konfigurazzjoni tan-network li saret waqt l-installazzjoni ma tistax tittella' issa. Jekk jogħġbok iċċekkja jekk in-network isirx aċċessibbli wara li tirristartja s-sistema, imbagħad ikkoreġi l-konfigurazzjoni miċ-Ċentru tal-Kontroll Mandrake, taħt is-sezzjoni "Network u Internet"/"Konnessjoni", u wara ssettja l-printer, mill-istess Ċentru tal-Kontroll, sezzjoni "Ħardwer"/"Printer".

en: The network needs to be restarted. Do you want to restart it ?
target: In-network irid jiġi ristartjat. Tridni nirristarjah?

en: The official MandrakeSoft Store
target: Il-ħanut uffiċjali ta' MandrakeSoft

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver'll only be used on next bootstrap.
target: Id-drajver "%s" antik huwa mmarkat li hu ħażin.
    
    Huwa rrapportat li jikkawża problemi fil-kernel waqt it-tneħħija.
    
    Id-drajver il-ġdid "%s" jintuża biss għall-istartjar li jmiss.

en: The package %s is needed. Install it?
target: Il-pakkett %s huwa meħtieġ. Tridni ninstallah?

en: The package %s needs to be installed. Do you want to install it?
target: Irid jiġi nstallat il-pakkett %s. Tridni ninstallah?

en: The passwords do not match
target: Il-passwords ma jaqblux

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
target: Id-direttorju offruti (file sharing) għall-users juża l-
    grupp "fileshare". Tista' tuża userdrake biex iżżid
    users ma' dan il-grupp.

en: The port number should be an integer!
target: In-numru tal-port irid ikun sħiħ!

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
target: Il-portmapper jimmaniġġja konnessjonijiet RPC, li jintużaw minn 
    protokolli bħal NFS u NIS. Is-server portmap irid ikun qed jaħdem fuq
    kompjuters li jaġixxu bħala servers għal protokolli li jużaw il-
    mekkaniżmu RPC.

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
target: il-printer "%s" diġà jeżisti. 
    Trid tħassar il-konfigurazzjoni tiegħu?

en: The printer "%s" is set as the default printer now.
target: Il-printer "%s" issa ssettjat bħala printer impliċitu

en: The printer "%s" was successfully added to Star Office/OpenOffice.org/GIMP.
target: Il-printer "%s" ġie miżjud ma' StarOffice/OpenOffice

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org/GIMP.
target: Il-printer "%s" tneħħa minn StarOffice/OpenOffice

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
target: Is-sistema ta' printjar (%s) mhux se jittella' awtomatikament meta tixgħel il-kompjuter.
    
    Huwa possibbli t-tlugħ awtomatiku ġie mitfi meta bdilt il-livell ta' sigurtà ogħla, peress li s-sistema ta' printjar huwa punt fejn possibbilment isiru attakki.
    
    Trid li terġa' tixgħel it-tlugħ awtomatiku tas-sistema ta' printjar?

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
target: Id-daemon routed jippermetti lit-tabella tar-"routing" li tiġi
    aġġornata awtomatikament bil-protokoll RIP. Filwaqt li l-protokoll RIP
    huwa komuni fuq networks żgħar, huma meħtieġa protokolli ta' routing
    iżjed sofistikati fuq networks komplikati.

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
target: Il-protokoll rstat jippermetti users fuq network li jiksbu
    informazzjoni dwar l-effiċjenza ta' kull magna fuq dan in-network.

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
target: Il-protokoll rusers jippermetti lill users fuq network li jidentifikaw
    min qiegħed illoggjat fuq magni oħra.

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
target: Il-protokoll rwho jippermetti lill user remot li jikseb lista 
    tal-users kollha li qegħdin konnessi mal-kompjuter (simili għal finger)

en: The scanners on this machine are available to other computers
target: L-iskaners fuq dan il-kompjuter huma aċċessibbli għal kompjuters oħrajn

en: The setup has already been done, and it's currently enabled.
target: Dan il-konfigurazzjoni diġà sar, u bħalissa attivat.

en: The setup has already been done, but it's currently disabled.
target: Dan il-konfigurazzjoni diġà sar, imma bħalissa mitfi.

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
target: Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.
    Bħalissa huwa mixgħul.
    
    X'tixtieq tagħmel?

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community.
target: Is-suċċess ta' MandrakeSoft huwa bbażat fuq il-prinċipju ta' Softwer Ħieles. Is-sistema operattiva ġdida tiegħek hija frott il-ħidma u koperazzjoni min-naħa tal-kommunità dinjija tal-Linux.

en: The system doesn't seem to be connected to the Internet.
    Try to reconfigure your connection.
target: Is-sistema donnha ma setgħetx taqbad ma' l-internet.
    Ipprova erġa' kkonfigura l-konnessjoni.

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
target: Iż-żewġ parametri kritiċi huma frekwenza vertikali (vertical refresh rate), li
    hija r-rata li biha l-iskrin sħiħ jiġi aġġornat, u iżjed importanti il-frekwenza
    orizzontali (horizontal refresh rate), li hija r-rata li biha jiġu aġġornati l-linji.
    
    Huwa importanti ħafna li ma tispeċifikax skrin b'rata iżjed mgħaġġla milli
    kapaċi juri l-iskrin tiegħek, għax tista' tagħmillu l-ħsara.
    Jekk għandek xi dubju, agħżel valur żgħir.

en: The user name is too long
target: Dan l-isem ta' user huwa twil wisq

en: The user name must contain only lower cased letters, numbers, `-' and `_'
target: L-isem tal-user jista' jkun fih biss ittri żgħar, numri, "-" u "_".

en: Theme installation failed!
target: Installazzjoni ta' tema falliet

en: Theme name
target: Isem tat-tema

en: Themes
target: Temi

en: There are already some restrictions, and more automatic checks are run every night.
target: Diġà hemm xi restrizzjonijiet, u iżjed testijiet awtomatiċi jitħaddmu kuljum bil-lejl.

en: There are no printers found which are directly connected to your machine
target: Ma nstabu ebda printers imqabbda direttament mal-kompjuter

en: There is already a partition with mount point %s
target: Diġà hemm partizzjoni b'punt ta' mmuntar %s

en: There is no FAT partition to use as loopback (or not enough space left)
target: M'hemmx partizzjonijiet FAT biex tintuża bħala loopback (jew m'hemmx
    biżżejjed spazju)

en: There is no existing partition to use
target: M'hemmx partizzjonijiet eżistenti x'nuża

en: There is no medium or it is write-protected for device %s.
    Please insert one.
target: M'hemmx diska fl-apparat %s, jew ma tistax tinkiteb.
    Jekk jogħġbok daħħal waħda.

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
target: Hemm biss adattur wieħed fuq is-sistema tiegħek:
    
    %s
    
    Se nissettja n-network lokali fuq dak l-adattur.

en: There was an error installing packages:
target: Kien hemm problema fl-installazzjoni tal-pakketti:

en: There was an error ordering packages:
target: Kien hemm problema fl-ordni tal-pakketti:

en: There was an error while scanning for TV channels
target: Kien hemm problema waqt it-tfittix għal kanali televiżivi

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
target: M'hemm ebda drajver alternattiv OSS/ALSA għall-kard awdjo tiegħek (%s) li bħalissa tuża "%s"

en: There's no known driver for your sound card (%s)
target: M'hemm ebda drajver magħruf għall-kard awdjo tiegħek (%s)

en: These are the machines and networks on which the locally connected printer(s) should be available:
target: Dawn huma l-kompjuters u networks fejn għandhom ikunu disponibbli l-printers konnessi lokalment:

en: These are the machines from which the scanners should be used:
target: Dawn huma l-kompjuters mnejn jistgħu jintużaw l-iskaners:

en: These are the machines on which the locally connected scanner(s) should be available:
target: Dawn huma l-kompjuters fejn l-iskaner(s) imqabbdin lokalment ikunu disponibbli:

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
target: Dan il-kmand jista' wkoll jintuża fl-element "Printing command" tal-window tal-ipprintjar ta' ħafna programmi, imma ddaħħalx l-isem tal-fajl hemm għax dak jissupplixxih il-programm.

en: These options can backup and restore all files in your /etc directory.
target: Dawn l-għażliet jieħdu kopja tas-sigurtà u jirrestawraw il-fajls kollha tad-direttorju /etc.

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
target: Dan il-kmand jista' wkoll jintuża fl-element "Printing command" tal-window tal-ipprintjar ta' ħafna programmi, imma iddaħħalx l-isem tal-fajl hemm għax dak jissupplixxih il-programm.

en: This dialog allows you to fine tune your bootloader:
    
     * "%s": there are three choices for your bootloader:
    
        * "%s": if you prefer grub (text menu).
    
        * "%s": if you prefer LILO with its text menu interface.
    
        * "%s": if you prefer LILO with its graphical interface.
    
     * "%s": in most cases, you will not change the default ("%s"), but if
    you prefer, the bootloader can be installed on the second hard drive
    ("%s"), or even on a floppy disk ("%s");
    
     * "%s": after a boot or a reboot of the computer, this is the delay
    given to the user at the console to select a boot entry other than the
    default.
    
    !! Beware that if you choose not to install a bootloader (by selecting
    "%s"), you must ensure that you have a way to boot your Mandrake Linux
    system! Be sure you know what you are doing before changing any of the
    options. !!
    
    Clicking the "%s" button in this dialog will offer advanced options which
    are normally reserved for the expert user.
target: Hawn tista' tissettja l-"boot loader":
    
     * "%s": hemm tliet għażliet għall-boot loader:
    
        * "%s": jekk tippreferi grub (menu testwali).
    
        * "%s": jekk tippreferi LILO b'modalità testwali.
    
        * "%s": jekk tippreferi LILO b'modalità grafika.
    
     * "%s": ġeneralment ma tbiddilx il-valur impliċitu ("%s"),
    imma jekk tippreferi, il-bootloader jista' jiġi nstallat fuq it-tieni diska
    ("%s") jew saħansitra flopi ("%s").
    
     * "%s": meta tixgħel il-kompjuter, dan jistenna
    daqshekk biex il-user ikun jista' jagħmel għażliet oħra.
    
    !! Importanti tkun taf li jekk ma tinstallax "bootloader" (billi tagħfas 
    "%s"), irid ikollok metodu ieħor biex ittella' s-sistema Mandrake 
    Linux. Kun af sew x'qed tagħmel qabel tibdel waħda minn dawn l-għażliet. !!
    
    Jekk tagħfas il-buttuna "%s" f'din il-window tara diversi għażliet
    avvanzati għal users esperti.

en: This directory should remain within the root filesystem
target: Dan id-direttorju irid jibqa' fil-filesystem root.

en: This encryption key is too simple (must be at least %d characters long)
target: Din iċ-ċavetta taċ-ċifrazzjoni huwa sempliċi wisq (irid ikun twil tal-inqas %d ittri)

en: This floppy is not FAT formatted
target: Din il-flopi m'hix formattjata FAT

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
target: Din l-interfaċċja għadha ma ġietx ikkonfigurata.
    Ħaddem is-saħħar tal-konfigurazzjoni mill-window ewlenija

en: This is a mandatory package, it can't be unselected
target: Dan il-pakkett huwa kruċjali, ma jistax jitneħħa

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
target: Ibbażat fuq il-livell ta' qabel, imma issa s-sistema hija magħluqa għal kollox.
    Is-setings tas-sigurtà qegħdin fil-massimu.

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
target: Dan huwa s-seting rakkomandat jekk se tuża dan il-kompjuter fuq l-internet bħala klijent.

en: This label is already used
target: Dan l-isem diġà qed jintuża

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
target: Oqgħod attent jekk tuża dan il-livell. Il-kompjuter tiegħek jista' ikun iżjed faċli tużah, imma jkun vulnerabbli ħafna. Qatt m'għandu jintuża fuq kompjuter imqabbad ma' oħrajn permezz ta' network jew ma' l-internet. Ma hemm ebda password.

en: This machine
target: Dan il-kompjuter

en: This may take a moment to erase the media.
target: Dan jista' jieħu ftit tal-ħin sakemm titħassar il-medja.

en: This may take a moment to generate the keys.
target: Dan jista' jieħu ftit tal-ħin sakemm jiġġenera ċ-ċifrarji.

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
target: Dan il-pakkett itella' t-tqassim tat-tastiera kif konfigurat f'
    /etc/sysconfig/keyboard.  Dan jista' jiġi ssettjat bil-programm kbdconfig.
    Dan għandu jibqa' ssettjat għal ħafna magni.

en: This package must be upgraded.
    Are you sure you want to deselect it?
target: Dan il-pakkett għandu bżonn jiġi aġġornat.
    Żgur li trid tneħħi l-għażla?

en: This partition can't be used for loopback
target: Din il-partizzjoni ma tistax tintuża għal loopback

en: This partition is not resizeable
target: Din il-partizzjoni ma tistax tinbidel id-daqs tagħha

en: This password is too short (it must be at least %d characters long)
target: Dan il-password qasir wisq (irid ikun twil tal-inqas %d ittri)

en: This password is too simple
target: Dan il-password sempliċi wisq

en: This product is available on the MandrakeStore Web site.
target: Dan il-prodott jinkiseb mill-website MandrakeStore

en: This server is already in the list, it cannot be added again.
target: Dan is-server diġà fil-lista, ma jistax jerġa jiġi miżjud

en: This theme does not yet have a bootsplash in %s !
target: Din it-tema m'għandhiex bootsplash f' %s.

en: This user name has already been added
target: Dan l-isem ta' user diġà jeżisti

en: This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -scanbus' would also show you the device number.
target: Dan juża l-istess sintassi tal-linja ta' kmand bħal cdrecord. "cdrecord -scanbus" ukoll jagħtik isem l-apparat.

en: This will take a few minutes.
target: Dan jieħu diversi minuti.

en: Thursday
target: il-Ħamis

en: Time remaining
target: Ħin li fadal

en: Timezone
target: Żona tal-ħin

en: To activate the mouse,
target: Biex tħaddem il-maws

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
target: Biex tkun tista' tipprintja bl-inkġet Lexmark u b'din il-konfigurazzjoni, trid id-drajver tal-printer provdut minn Lexmark (http://www.lexmark.com) Klikkja l-buttuna "Drivers", imbagħad agħżel il-mudell u "Linux" bħala sistema operattiva. Id-drajvers jiġu bħala pakketti RPM jew skritti tax-shell b'installazzjoni grafika. M'għandekx bżonn tagħmel l-installazzjoni grafika. Ikkanċella malli tlesti l-qbil tal-liċenzja, imbagħad ipprintja l-paġni ta' allinjament tal-printhead b' "lexmarkmaintain" u irranġa s-setings tal-allinjament b'dan il-programm.

en: To get a list of the options available for the current printer click on the "Print option list" button.
target: Biex tikseb lista ta' għażliet disponibbli għal dan il-printer agħfas il-buttuna "Lista ta' għażliet tal-printer".

en: To have more partitions, please delete one to be able to create an extended partition
target: Biex iżżid iżjed partizzjonijiet, trid tħassar waħda milli hemm biex tkun tista' toħloq partizzjoni estiża

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s%s
target: Biex issir taf dwar l-għażliet disponibbli għal dan il-printer, aqra l-lista li tidher taħt, jew agħfas il-buttuna "Lista ta' għażliet tal-printer".%s%s%s.

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
target: Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand "%s <fajl>" jew "%s <fajl>".

en: To print a file from the command line (terminal window) use the command "%s <file>".
target: Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand "%s <fajl>".

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
target: Biex tipprintja fajl mil-linja ta' kmand (terminal), tista' tuża l-kmand "%s <fajl>" jew programm grafiku: "upp <fajl>" jew "kprinter <fajl>". Il-programmi grafiċi jħalluk tagħżel il-printer jew tbiddel is-setings faċilment.

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
target: Biex tipprintja fuq printer NetWare, trid tagħti l-isem NetWare tal-kompjuter (li
    jista' jkun differenti mill-isem TCP/IP), kif ukoll l-isem tal-kju ta' printjar li tixtieq tuża, u isem u password tal-user jekk hemm bżonn.

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
target: Biex tipprintja fuq printer SMB, trid tagħti l-isem SMB tal-kompjuter (li
    jista' jkun differenti mill-isem TCP/IP), u possibbilment l-indirizz IP tiegħu, kif ukoll l-isem tal-printer (share name) li trid taqbad miegħu, u possibbilment l-isem u password tal-user li trid taqbad bih, u informazzjoni dwar il-workgroup.

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
target: Biex tipprintja fuq printer TCP jew socket, trid tissupplixxi l-isem jew IP tal-printer u possibbilment in-numru tal-port. Fuq servers HP JetDirect in-numru tal-port ġeneralment huwa 9100. Fuq printers oħra dan ivarja. Iċċekkja l-manwal tal-printer.

en: To share your own knowledge and help build Linux software, join our discussion forums on our "Community" webpages.
target: Biex taqsam l-esperjenza tiegħek u tgħin biex tiżviluppa programmi għal-Linux, ingħaqad mal-forums ta' diskussjonijiet li ssib fuq il-paġni tagħna tal-komunità.

en: To submit a bug report, click on the button report.
    This will open  a web browser window on %s
     where you'll find a form to fill in.  The information displayed above will be 
    transferred to that server.
target: Biex tissottometti rapport dwar bug, klikkja l-buttuna "Rapport".
    Dan jiftaħ web browser fuq il-paġna %s
    fejn issib formola x'timla'. L-informazzjoni li wrejt hawn fuq jiġi
    trasferit lil dak is-server.

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
target: Biex tipprintja fuq printer remot lpd, trid tagħti l-isem tal-kompjuter kif ukoll l-isem tal-printer fuq dak is-server.

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
target: Biex tuża din l-għażla ta' pakketti, ħaddem l-installazzjoni b' "linux defcfg=floppy"

en: Toggle between flat and group sorted
target: Aqleb bejn lista sempliċi jew kategorizzata

en: Toggle between normal/expert mode
target: Aqleb bejn modalità normali u esperta

en: Toggle to expert mode
target: Idħol f'modalità għal esperti

en: Toggle to normal mode
target: Lura f'modalità normali

en: Tokelau
target: Tokelaw

en: Tools to ease the configuration of your computer
target: Għodda biex tiffaċilita l-konfigurazzjoni tal-kompjuter

en: Total Progress
target: Progress totali

en: Total progress
target: Progress totali

en: Total size: %d / %d MB
target: Daqs totali: %d / %d MB

en: Track network card id (useful for laptops)
target: Żomm kont tal-ID tal-kard tan-network (utli fuq laptops)

en: Transfer
target: Ittrasferixxi

en: Transfer printer configuration
target: Ittrasferixxi konfigurazzjoni tal-printer

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s\@%s
    
    without being prompted for a password.
target: Trasferiment irnexxa
    Forsi trid tivverifika li tista' tagħmel login fuq is-server b':
    
    ssh -i %s %s\@%s
    
    mingħajr ma jistaqsik għal password.

en: Transferring %s...
target: Qed nittrasferixxi %s...

en: Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!
target: Ibdel il-kompjuter tiegħek f'server b'saħħtu bi ftit azzjonijiet tal-maws: Servers tal-web, imejl, firewall, router, fajls u printjar, ...

en: Trinidad and Tobago
target: Trinidad u Tobago

en: Trouble shooting
target: Identifikazzjoni ta' problemi

en: True Type fonts installation
target: Installazzjoni ta' fonts TrueType

en: True Type install done
target: Installazzjoni TrueType lest

en: Truly minimal install (especially no urpmi)
target: Installazzjoni verament minima (mingħajr urpmi)

en: Trying to rescue partition table
target: Qed nipprova nsalva t-tabella ta' partizzjonijiet

en: Tuesday
target: it-Tlieta

en: Tuner type:
target: Tip ta' tuner :

en: Tunisia
target: Tuneżija

en: Turkey
target: Turkija

en: Turkish (modern "Q" model)
target: Tork (mudell modern "Q")

en: Turkish (traditional "F" model)
target: Tork (mudell tradizzjonali "F")

en: Turks and Caicos Islands
target: Gżejjer Turks u Caicos

en: Turn your computer into a reliable server
target: Ibdel il-kompjuter tiegħek f'server stabbli

en: Tvcard
target: Kard TV

en: Type
target: Tip

en: Type of install
target: Tip ta' installazzjoni

en: Type:
target: Tip:

en: Type:
target: Tip:

en: UK keyboard
target: Renju Unit

en: URL should begin with 'ftp:' or 'http:'
target: URL irid jibda' b' "ftp:" jew "http:"

en: US keyboard
target: Stati Uniti

en: US keyboard (international)
target: Tastiera US (internazzjonali)

en: USA (broadcast)
target: Stati Uniti (xandir)

en: USA (cable)
target: Stati Uniti (cable)

en: USA (cable-hrc)
target: Stati Uniti (cable-hrc)

en: USB controllers
target: Kontrollaturi USB

en: USB printer #%s
target: Printer USB #%s

en: Ukraine
target: Ukranja

en: Ukrainian
target: Ukranjan

en: Unable to find backups to restore...
target: Ma nistax insib kopji ta' sigurtà x'nirrestawra...

en: Unable to fork: %s
target: Ma stajtx noħloq proċess: %s

en: Unable to start live upgrade !!!
target: Ma stajtx nibda' l-aġġornament "live"!!!

en: Under Devel ... please wait.
target: Qed jiġi żviluppat... stenna ftit.

en: Undo
target: Annulla

en: Uninstall Fonts
target: Neħħi fonts

en: United Arab Emirates
target: Emirati Għarab Magħquda

en: United Kingdom
target: Renju Unit

en: United States
target: Stati Uniti

en: United States Minor Outlying Islands
target: Gżejjer Żgħar Imbegħda ta' l-Istati Uniti

en: Unknown
target: Mhux magħruf

en: Unknown Model
target: Mudell mhux magħruf

en: Unknown driver
target: Drajver mhux magħruf

en: Unknown model
target: Mudell mhux magħruf

en: Unknown|CPH05X (bt878) [many vendors]
target: Mhux magħruf|CPH05X (bt878) [diversi manifatturi]

en: Unknown|CPH06X (bt878) [many vendors]
target: Mhux magħruf|CPH06X (bt878) [diversi manifatturi]

en: Unknown|Generic
target: Mhux magħruf/Ġeneriku

en: Unmount
target: Żmonta

en: Unsafe
target: Mhux sikur

en: Unselect fonts installed
target: Neħħi l-marka minn fonts installati

en: Unselected All
target: Xejn magħżul

en: Up
target: Fuq

en: Updating package selection
target: Qed naġġorna l-għażla ta' pakketti

en: Upgrade
target: Aġġornament

en: Upgrade %s
target: Aġġorna %s

en: Uruguay
target: Urugwaj

en: Usage of remote scanners
target: Użu ta' skaners remoti

en: Use CD-R/DVD-R to backup
target: Uża CD/DVDROM għall-kopja tas-sigurtà

en: Use Expect for SSH
target: Uża "Expect" għal SSH

en: Use Hard Disk to backup
target: Uża ħard disk għal kopja tas-sigurtà

en: Use Incremental Backups
target: Uża kopji tas-sigurtà inkrementali

en: Use Unicode by default
target: Uża Unicode impliċitament

en: Use Xinerama extension
target: Uża estensjoni Xinerama

en: Use ``%s'' instead
target: Uża "%s" minnflok

en: Use ``Unmount'' first
target: L-ewwel agħfas "żmonta"

en: Use auto detection
target: Uża għarfien awtomatiku (auto-detect)

en: Use daemon
target: Uża daemon

en: Use existing partitions
target: Uża partizzjoni eżistenti

en: Use fdisk
target: Uża fdisk

en: Use for loopback
target: Uża bħala loopback

en: Use free space
target: Uża l-ispazju vojt

en: Use group id for execution
target: Uża l-id tal-grupp għat-tħaddim

en: Use libsafe for servers
target: Uża libsafe għas-servers

en: Use network connection to backup
target: Uża konnessjoni bin-network għall-kopja tas-sigurtà

en: Use owner id for execution
target: Uża l-id tas-sid għat-tħaddim

en: Use password to authenticate users
target: Uża password biex tawtentika users

en: Use quota for backup files.
target: Uża kwota għall-fajls tal-kopja tas-sigurtà.

en: Use tape to backup
target: Uża tejp għall-kopja tas-sigurtà

en: Use the %c and %c keys for selecting which entry is highlighted.
target: Uza l-buttuni %c u %c biex taghzel liema element huwa mmarkat.

en: Use the Windows partition for loopback
target: Uża l-partizzjoni tal-Windows għal loopback

en: Use the free space on the Windows partition
target: Uża l-ispazju vojt fil-partizzjoni tal-Windows

en: Used for directory:
     only owner of directory or file in this directory can delete it
target: Użat għal direttorji:
    is-sid tad-direttorju u l-fajls ta' ġo fih biss jista' jħassru

en: User list to restore (only the most recent date per user is important)
target: Lista ta' users x'tirrestawra (l-iżjed data riċenti ta' kull user biss importanti)

en: User name
target: Isem tal-user

en: User umask
target: umask tal-User

en: Username
target: User

en: Username required
target: Isem ta' user meħtieġ

en: Usually, DrakX has no problems detecting the number of buttons on your
    mouse. If it does, it assumes you have a two-button mouse and will
    configure it for third-button emulation. The third-button mouse button of a
    two-button mouse can be ``pressed'' by simultaneously clicking the left and
    right mouse buttons. DrakX will automatically know whether your mouse uses
    a PS/2, serial or USB interface.
    
    If for some reason you wish to specify a different type of mouse, select it
    from the list provided.
    
    If you choose a mouse other than the default, a test screen will be
    displayed. Use the buttons and wheel to verify that the settings are
    correct and that the mouse is working correctly. If the mouse is not
    working well, press the space bar or [Return] key to cancel the test and to
    go back to the list of choices.
    
    Wheel mice are occasionally not detected automatically, so you will need to
    select your mouse from a list. Be sure to select the one corresponding to
    the port that your mouse is attached to. After selecting a mouse and
    pressing the "%s" button, a mouse image is displayed on-screen. Scroll
    the mouse wheel to ensure that it is activated correctly. Once you see the
    on-screen scroll wheel moving as you scroll your mouse wheel, test the
    buttons and check that the mouse pointer moves on-screen as you move your
    mouse.
target: Normalment, DrakX ma jsibx problemi biex jinduna kemm għandu buttuni
    l-maws. Jekk ikollu, huwa jassumi li għandek maws b'żewġ buttuni u jissettjah
    għall-emulazzjoni tat-tielet buttuna. It-tielet buttuna f'dan il-każ tfisser li tagħfas 
    iż-żewġ buttuni l-oħrajn flimkien. DrakX kapaċi jinduna waħdu jekk il-
    maws huwiex PS/2, serjali jew USB.
    
    Jekk tixtieq tispeċifika tip ta' maws differenti, agħżel it-tip tajjeb mil-
    lista provduta.
    
    Jekk tagħżel tip ta' maws differenti mill-oriġinali, tiġi provduta faċilità
    biex tittestja s-setings. Uża l-buttuni kollha u r-rota biex tivverifika li s-
    setings jaħdmu sew. Jekk il-maws ma jaħdimx sew agħfas "spazju" jew
    [Enter] biex tikkanċella u terġa' tagħżel ieħor.
    
    Maws bir-rota ġieli ma jiġix magħruf sew awtomatikament, għalhekk ikollok
    tagħżel it-tip minn lista. Ara li tagħżel dak li jikkorrispondi mal-port fejn huwa
    mqabbad il-maws. Wara li tagħżel maws u tagħfas il-buttuna "%s", tittella'
    stampa ta' maws. Mexxi r-rota biex tiżgura li din tiġi ssettjata sew. Meta tara
    r-rota fuq l-iskrin timxi meta ċċaqlaq ir-rota fuq il-maws, iċċekkja li l-buttuni 
    jaħdmu u li l-vleġġa fuq l-iskrin timxi meta ċċaqlaq il-maws.

en: Uzbek (cyrillic)
target: Użbeki (ċirilliku)

en: Uzbekistan
target: Użbekistan

en: Various
target: Varji

en: Vendor
target: Manifattur

en: Venezuela
target: Venezwela

en: Vertical refresh rate
target: Frekwenza vertikali

en: Video mode
target: Konfigurazzjoni video

en: Vietnamese "numeric row" QWERTY
target: Vjetnamiż qwerty "numeric row"

en: View Backup Configuration.
target: Ara konfigurazzjoni tal-kopja tas-sigurtà.

en: View Configuration
target: Ara Konfigurazzjoni

en: Virgin Islands (British)
target: Gżejjer Virgin (Brittanniċi)

en: Virgin Islands (U.S.)
target: Gżejjer Virgin (US)

en: WARNING
target: TWISSIJA

en: WARNING!
    
    DrakX will now resize your Windows partition. Be careful: this
    operation is dangerous. If you have not already done so, you
    first need to exit the installation, run "chkdsk c:" from a
    Command Prompt under Windows (beware, running graphical program
    "scandisk" is not enough, be sure to use "chkdsk" in a
    Command Prompt!), optionally run defrag, then restart the
    installation. You should also backup your data.
    When sure, press Ok.
target: TWISSIJA!
    
    DrakX issa se jbiddel id-daqs tal-partizzjoni Windows. Oqgħod
    attent: dan il-proċess huwa perikoluż. Jekk għadek m'għamiltx dan,
    jaqbillek l-ewwel toħroġ mill-proċess tal-installazzjoni, tħaddem
    "scandisk" mill-"command prompt" tal-Windows u idejalment 
    anke "defrag", u mbagħad terġa' tibda l-installazzjoni. Int 
    rakkomandat ukoll li tieħu kopja tas-sigurtà tal-informazzjoni 
    importanti.
    Meta tkun ċert, agħfas Ok.

en: WARNING: this device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
target: TWISSIJA: Dan l-apparat diġà kien konfigurat qabel biex jaqbad ma' l-internet.
    Sempliċiment aċċetta li żżomm dan l-apparat konfigurat.
    Jekk tbiddel il-valuri ta' taħt dawn jieħdu post il-konfigurazzjoni preżenti.

en: Wait please
target: Stenna ftit

en: Wait please, testing your connection...
target: Stenna ftit... qed nittestja l-kollegament...

en: Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!
target: Trid tkun taf iżjed dwar il-komunità Sors Ħieles? Ingħaqad mad-dinja ta' Softwer Ħieles!

en: Warning
target: Twissija

en: Warning : IP address %s is usually reserved !
target: Twissija: Indirizz IP %s normalment riservat !

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
target: Twissija: Instabet konfigurazzjoni eżistenti ta' firewall. Għandek mnejn tkun trid tirranġaha manwalment wara l-installazzjoni.

en: Warning, another Internet connection has been detected, maybe using your network
target: Twissija: instabet konnessjoni oħra tal-Internet, forsi qed tuża n-network tiegħek

en: Warning, another internet connection has been detected, maybe using your network
target: Twissija: instabet konnessjoni oħra tal-Internet, forsi qed tuża n-network tiegħek

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
target: Twissija, l-adattur tan-network (%s) diġà konfigurat.
    
    Trid ri-konfigurazzjoni awtomatika?
    
    Tista' tagħmilha manwalment imma trid tkun taf x'qed tagħmel.

en: Warning: testing this graphic card may freeze your computer
target: Twissija: it-test ta' din il-kard grafika jista' jwaħħal il-kompjuter

en: Web Server
target: Server tal-web

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
target: WebDAV huwa protokoll li jħallik timmonta d-direttorju ta' webserver
    lokalment u tittrattah bħala filesystem lokali (dejjem jekk il-webserver
    huwa ssettjat bħala server WebDAV). Jekk tixtieq iżżid punti ta' mmuntar
    WebDAV, agħżel "Ġdid".

en: WebDAV remote site already in sync!
target: Sit remot WebDAV diġà sinkronizzat!

en: WebDAV transfer failed!
target: Trasferiment WebDAV falla!

en: Webmin Service
target: Servizz Webmin

en: Wednesday
target: l-Erbgħa

en: Weekday
target: Ġurnata tal-ġimgħa

en: Welcome To Crackers
target: Bieb miftuħ beraħ!

en: Welcome to %s
target: Merħba għal %s

en: Welcome to %s the operating system chooser!
    
    Choose an operating system from the list above or
    wait %d seconds for default boot.
target: Merhba ghal %s - ghazla ta' sistema operattiva
    
    Aghzel sistema operattiva mil-lista ta' fuq, jew
    stenna %d sekondi ghall-ghazla implicita

en: Welcome to GRUB the operating system chooser!
target: Merhba ghal GRUB - ghazla ta' sistema operattiva

en: Welcome to The Network Configuration Wizard.
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
target: Merħba għas-Saħħar tal-Konfigurazzjoni tan-Network
    
    Hawnhekk se nikkonfiguraw il-konnessjoni tal-internet/network.
    Jekk ma tixtieqx tuża l-għarfien awtomatiku (autodetect), neħħi l-marka.

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
target: Merħba għall-Faċilità ta' Qsim tal-Konnessjoni tal-Internet!
    
    %s
    
    Ikklikkja "Ikkonfigura" biex tħaddem is-saħħar tal-konfigurazzjoni.

en: Welcome to the Open Source world.
target: Merħba għad-dinja Sors Miftuħ

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
target: Merħba għall-għodda tal-konfigurazzjoni imejl.
    
    Hawn, tista' tissettja s-sistema tat-twissijiet.

en: West Europe
target: Ewropa tal-Punent

en: Western Sahara
target: Saħara tal-Punent

en: What
target: Xiex

en: What kind is your ISDN connection?
target: X'tip ta' konnessjoni ISDN għandek?

en: What kind of card do you have?
target: X'tip ta' kard għandek?

en: What norm is your TV using?
target: Liema standard juża t-TV tiegħek?

en: What type of partitioning?
target: X'tip ta' partizzjoni?

en: Wheel
target: Rota

en: When
target: Meta

en: When checked, owner and group won't be changed
target: Meta mmarkat, is-sid u l-grupp ma jinbidlux

en: Where
target: Fejn

en: Where do you want to install the bootloader?
target: Fejn tixtieq tinstalla l-"bootloader"?

en: Where do you want to mount %s?
target: Fejn trid timmonta %s?

en: Where do you want to mount device %s?
target: Fejn trid timmonta d-diska %s?

en: Which %s driver should I try?
target: Liema drajver %s tridni nipprova?

en: Which configuration of XFree do you want to have?
target: Liema konfigurazzjoni ta' XFree trid li jkollok?

en: Which disk do you want to move it to?
target: Fuq liema diska trid tmexxiha?

en: Which filesystem do you want?
target: Liema filesystem trid?

en: Which is your timezone?
target: Liem hi ż-żona orarja tiegħek?

en: Which partition do you want to resize?
target: Liema partizzjoni trid tibdlilha d-daqs?

en: Which partition do you want to use for Linux4Win?
target: Liema partizzjoni trid tuża għal Linux4Win?

en: Which printer model do you have?
target: Liema mudell ta' printer għandek?

en: Which printing system (spooler) do you want to use?
target: Liema sistema ta' printjar (spooler) tixtieq tuża?

en: Which protocol do you want to use?
target: Liema protokoll trid tuża?

en: Which sector do you want to move it to?
target: Fuq liema settur trid tmexxiha?

en: Which services would you like to allow the Internet to connect to?
target: Liema servizzi trid ikunu aċċessibbli mill-internet?

en: Which size do you want to keep for Windows on
target: X'daqs trid iżżomm għall-windows fuq

en: Which type of entry do you want to add?
target: Liema tip ta' sistema operattiva trid iżżid?

en: Which username
target: Liema user

en: Windows Domain
target: Dominju tal-Windows

en: Windows Migration tool
target: Għodda għall-migrazzjoni mill-Windows

en: With X
target: Bl-XWindows

en: With basic documentation
target: B' dokumentazzjoni bażika

en: With basic documentation (recommended!)
target: B' dokumentazzjoni bażika (rakkomandat)

en: With this option you will be able to restore any version
     of your /etc directory.
target: B'din l-għażla tkun tista' tirrestawra kwalinkwa verżjoni
    tad-direttorju /etc.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
target: B'dan il-livell ta' sigurtà jsir possibbli li tuża dan il-kompjuter bħala server.
    Is-sigurtà hija għolja biżżejjed biex jintuża bħala server li jaċċetta konnessjonijiet
    minn ħafna kompjuters oħra. Jekk int se tuża l-kompjuter bħala klijent biss, jew biex taċċessa l-internet, jaqbillek livell iżjed baxx.

en: Wizard
target: Saħħar

en: Wizard Configuration
target: Konfigurazzjoni b'Saħħar

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
target: Trid tippermetti lill-users li joffru xi direttorji fid-direttorju personali tagħhom għal fuq in-network?
    Jekk tippermetti dan, il-users ikunu jistgħu jagħżlu "Offri" jew "Share" ġo konqueror jew nautilus.
    
    "Personalizzat" jippermetti setings għal kull user.

en: Would you like to try again?
target: Tixtieq terġa' tipprova?

en: Write Config
target: Ikteb konf.

en: X11 Display Manager allows you to graphically log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
target: X11 Display Manager iħallik tilloggja grafikament fis-sistema
    permezz tas-sistema X Windows, u jippermetti iżjed minn sessjoni
    waħda X fl-istess ħin.

en: XFree %s with 3D hardware acceleration
target: XFree %s b'aċċelerazzjoni 3D

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
target: XFree %s b'aċċelerazzjoni 3D ESPERIMENTALI

en: XFree configuration
target: Konfigurazzjoni XFree

en: XFree86 driver: %s
target: Drajver XFree86: %s

en: XFree86 server: %s
target: Server XFree86: %s

en: XawTV isn't installed!
target: XawTV mhux installat!

en: Xinetd Service
target: Servizz XInetd

en: Xpmac (installation display driver)
target: Xpmac (drajver tal-iskrin għall-installazzjoni)

en: Yaboot mode
target: Modalità yaboot

en: Yemen
target: Jemen

en: Yes
target: Iva

en: Yes, I want autologin with this (user, desktop)
target: Iva, rrid awto-login b'dan il-user u desktop

en: You appear to have an OldWorld or Unknown
     machine, the yaboot bootloader will not work for you.
    The install will continue, but you'll
     need to use BootX or some other means to boot your machine
target: Jidher li għandek magna "OldWorld" jew mhux 
    magħrufa. Il-bootloader "yaboot" m'hux se jaħdem fuqha. 
    L-installazzjoni se tkompli, imma trid tuża BootX biex 
    ittella' l-Linux.

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
target: Int issa se tikkonfigura flopi Awto-installazzjoni. Din il-faċilità tista' tkun perikoluża u trid tintuża bil-galbu.
    
    B'din il-faċilità tista' tirrepeti l-installazzjoni li għamilt fuq dan il-kompjuter, filwaqt li tiġi mistoqsi dwar ċerti passi biex tbiddillhom il-valur.
    
    Għal sigurtà massima, il-partizzjoni u formattjar tal-ħard disk qatt ma jsiru awtomatikament, tagħżel x'tagħżel waqt l-installazzjoni tal-kompjuter.
    
    Trid tkompli?

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Se tikkonfigura l-kompjuter biex jaqsam il-konnessjoni tal-internet.
    B'din il-faċilità, kompjuters oħra fuq in-network tiegħek ikunu jistgħu jużaw il-konnessjoni mal-internet ta' dan il-kompjuter.
    
    Aċċerta li għandek l-aċċess għan-network/internet mixgħul billi tuża drakconnect qabel tkompli.
    
    Nota: irid ikollok adattur tal-internet dedikat biex tissettja n-network lokali (LAN)

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
target: Se tinstalla s-sistema ta' printjar %s fuq sistema li għandha l-livell ta' sigurtà %s.
    
    Din is-sistema ta' printjar tħaddem daemon (proċess fl-isfond) li jistenna' xogħlijiet ta' printjar u jieħu ħsiebhom. Dan id-daemon huwa wkoll aċċessibbli minn kompjuters oħra fuq in-network għalhekk huwa possibbli għal attakki fuqu. Għalhekk, id-daemons li jittellgħu f'dan il-livell huma ftit u magħżula sew.
    
    Żgur li trid tikkonfigura l-ipprintjar fuq dan il-kompjuter?

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
target: Int se tissettja l-ipprintjar fuq kont tal-Windows li jeħtieġ password. Minħabba difett fl-arkitettura tal-klijent Samba, il-password titpoġġa b'mod li jinqara' fuq il-linja ta' kmand li juża dan il-klijent biex tibgħat ix-xogħol lis-server Windows. Għalhekk huwa possibbli għal kull user li hemm fuq dan il-kompjuter li jara l-password billi juża kmand bħal "ps auxwww".
    
    Aħna nirrakkomandaw li tagħmel użu minn waħda minn dawn l-alternattivi (fil-każi kollha trid taċċerta li l-kompjuters fuq in-network lokali biss għandhom aċċess għas-server Windows, per eżempju permezz ta' firewall):
    
    Uża kont minngħajr password fuq is-server Windows, per eżempju l-kont "GUEST" jew kont speċjali dedikat għall-ipprintjar. Tneħħix il-protezzjoni tal-password mall-kont personali jew dak tal-amministratur.
    
    Issettja s-server tal-Windows biex jagħmel dan il-printer disponibbli taħt il-protokoll LPD, imbagħad issettja l-printer fuq dan il-kompjuter permezz tat-tip ta' konnessjoni "%s" minn PrinterDrake.

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
target: Qed tikkonfigura "OKI laser winprinter". Dawn il-printers jużaw protokoll ta' kommunikazzjoni speċjali u għalhekk jaħdmu biss meta jkunu mqabbdin ma' l-ewwel port parallel. Meta l-printer ikun imqabbad ma' port ieħor jew ma' print server, jekk jogħġbok l-ewwel qabbdu ma' l-ewwel port parallel qabel tipprintja paġna biex tittestja, inkella l-printer ma jaħdimx. It-tip ta' konnessjoni jiġi injorat mid-drajver.

en: You are currently using %s as your boot manager.
    Click on Configure to launch the setup wizard.
target: Bħalissa qed tuża %s bħala BootManager.
    Klikkja "ikkonfigura"" biex tħaddem il-konfiguratur.

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
target: Qed tipprova tissettja printer remot. Dan għandu bżonn aċċess għan-network, imma s'issa ma ġietx issettjata n-network. Jekk tkompli minngħajr network, għandu mnejn ma tkunx tuża l-printer li qed tissettja issa. Kif trid tipproċedi?

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
target: Tista' wkoll tuża l-interfaċċja grafika "xpdq" biex tissettja l-għażliet u biex tieħu ħsieb xogħlijiet ta' printjar.
    Jekk qed tuża l-KDE bħala ambjent tad-desktop, għandek issib ikona fuq id-desktop li tħallik twaqqaf il-printjar kollu, per eżempju jekk jeħlulek il-karti.

en: You can configure each parameter of the module here.
target: Tista' tikkonfigura kull parametru tal-modulu minn hawn.

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
target: Tista' tikkopja l-konfigurazzjoni tal-printer minn spooler %s għal %s, l-ispooler attwali. L-informazzjoni kollha tal-konfigurazzjoni (isem tal-printer, deskrizzjoni, post, tip ta' konnessjoni u setings impliċiti) jiġu trasferiti, imma xogħlijiet eżistenti ta' printjar ma jiġux trasferiti.
    Mhux il-kjus kollha jistgħu jiġu trasferiti minħabba dawn ir-raġunijiet:

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp.
    Have a look at /etc/services for information.
target: Tista' ddaħħal diversi portijiet.
    Eżempji validi huma: 139/tcp 139/udp.
    Ħares lejn /etc/services għal iżjed informazzjoni.

en: You can export using NFS or Samba. Please select which you'd like to use.
target: Tista' toffri direttorji bl-NFS jew Samba. Liema trid?

en: You can now partition %s.
    When you are done, don't forget to save using `w'
target: Tista' tippartizzjona %s.
    X'ħin tlesti, tinsiex tikteb il-bidliet billi tittajpja "w".

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
target: Tista' tispeċifika l-URI tal-printer direttament. Il-URI irid isegwi l-format tal-CUPS jew tal-Foomatic. Innota li mhux kull tip ta' URI huwa aċċettat mill-ispoolers kollha.

en: You can't create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
target: Ma nistax noħloq partizzjoni ġdida
    (għax ilħaqt il-limitu ta' partizzjonijiet primarji).
    L-ewwel neħħi partizzjoni primarja u oħloq partizzjoni estiża.

en: You can't install the bootloader on a %s partition
target: Ma tistax tinstalla l-bootloader fil-partizzjoni %s

en: You can't select this package as there is not enough space left to install it
target: Ma tistax tagħżel dan il-pakkett għax ma fadalx biżżejjed spazju għalih

en: You can't select/unselect this package
target: Ma tistax tagħżel dan il-pakkett

en: You can't unselect this package. It is already installed
target: Ma tistax tneħħi l-għażla minn dan il-pakkett, diġà nstallat.

en: You can't unselect this package. It must be upgraded
target: Ma tistax tneħħi l-għażla minn dan il-pakkett. Irid jiġi aġġornat.

en: You can't use JFS for partitions smaller than 16MB
target: Ma tistax tuża JFS għal partizzjonijiet iżgħar minn 16MB

en: You can't use ReiserFS for partitions smaller than 32MB
target: Ma tistax tuża ReiserFS għal partizzjonijiet iżgħar minn 32MB

en: You can't use a LVM Logical Volume for mount point %s
target: Ma tistax tuża volum loġiku LVM għall-punt ta' mmuntar %s

en: You can't use an encrypted file system for mount point %s
target: Ma tistax tuża filesystem iċċifrat għall-punt ta' mmuntar %s

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
target: Int għażilt li tinstalla l-bootloader fuq partizzjoni. 
    Dan jimplika li diġà għandek bootloader fuq il-ħard disk mnejn tistartja (eż: System Commander).
    
    Minn fuq liema drajv tistartja?

en: You don't have a swap partition.
    
    Continue anyway?
target: M'għandekx partizzjoni "swap".
    
    Trid tkompli xorta?

en: You don't have an Internet connection.
    Create one first by clicking on 'Configure'
target: Għad m'għandekx konnessjoni mal-internet.
    Oħloq waħda billi tikklikkja "Ikkonfigura"

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
target: M'għandek ebda interfaċċja kkonfigurata.
    L-ewwel ikkonfigurahom billi tikklikkja "ikkonfigura"

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
target: Għandek toqba fit-tabella tal-partizzjonijiet imma ma nistax nużaha.
    L-unika soluzzjoni hija li tmexxi l-partizzjoni primarja sabiex din it-toqba tkun maġenb il-partizzjoni estiża

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
target: Int ikkonfigurajt diversi modi biex taqbad ma' l-internet.
    Liema minnhom trid tuża?

en: You have more than one hard drive, which one do you install linux on?
target: Għandek iżjed minn ħard disk waħda. Fuq liema trid tinstalla l-Linux?

en: You have not configured X. Are you sure you really want this?
target: Għadek ma kkonfigurajtx X. Żgur trid hekk?

en: You have one big MicroSoft Windows partition.
    I suggest you first resize that partition
    (click on it, then click on "Resize")
target: Għandek partizzjoni waħda kbira Microsoft Windows.
    Nissuġġerixxi li l-ewwel iċċekken dik il-partizzjoni
    (klikkja fuqha, u agħfas "ibdel daqs")

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
target: Int ittrasferixxejt il-printer li kien impliċitu qabel ("%s"). Trid li jerġa' jkun il-printer impliċitu taħt is-sistema l-ġdida %s?

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
target: Għadek m'għażilt ebda grupp ta' pakketti
    Jekk jogħġbok agħżel installazzjoni minima li trid:

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
target: Għandek mnejn trid tbiddel is-setings tal-Open Firmware u tbiddel l-
    apparat tal-boot biex jiffunzjona l-bootloader.  Jekk ma tixtieqx tara
    l-prompt tal-bootloader meta tirristartja, żomm Command-Option-O-F 
    waqt ir-ristartjar u daħħal:
     setenv boot-device %s,\\:tbxi
     Imbagħad ittajpja: shut-down
    Meta jerġa' jitla' għandek tara l-prompt tal-bootloader.

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
target: Issa trid tipprovdi l-għażliet lill-modulu %s.
    Innota li l-indirizzi jridu jiddaħħlu bil-prefiss 0x, bħal "0x123".

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
target: Tista' tipprovdi l-għażliet lill-modulu %s.
    L-għażliet għandhom il-format "isem=valur isem=valur ...".
    Per eżempju, "io=0x300 irq=7".

en: You must also format %s
target: Trid ukoll tifformattja %s

en: You must be root to read configuration file.
target: Trid tkun root biex taqra' l-fajl ta' konfigurazzjoni.

en: You must choose an image file first!
target: L-ewwel trid tagħżel fajl tal-istampa

en: You must choose/enter a printer/device!
target: Trid tagħżel/iddaħħal printer/apparat!

en: You must enter a device or file name!
target: Trid iddaħħal isem ta' port jew fajl!

en: You must have a FAT partition mounted in /boot/efi
target: Għandek bżonn partizzjoni FAT immuntata fuq /boot/efi

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
target: Għandek bżonn partizzjoni "root".
    Għal dan l-ewwel oħloq partizzjoni (jew agħżel waħda eżistenti)
    Imbagħad agħżel "Punt ta' mmuntar" u ssettjah għal "/"

en: You must specify a kernel image
target: Trid tispeċifika "image" tal-kernel

en: You must specify a root partition
target: Trid tispeċifika partizzjoni "root"

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
target: Għandek bżonn filesystem vera (ext2/ext3, reiserfs, xfs jew jfs) għal dan il-punt ta' mmuntar

en: You need the Alcatel microcode.
    You can provide it now via a floppy or your windows partition,
    or skip and do it later.
target: Għandek bżonn il-microcode ta' Alcatel.
    Tista' tipprovdih issa permezz ta' flopi jew partizzjoni 
    tal-Windows, jew taqbżu u tagħmlu iżjed 'il quddiem.

en: You need to reboot for the partition table modifications to take place
target: Trid tirristartja sabiex il-bidliet fit-tabella tal-partizzjonijiet ikollhom effett.

en: You will now set up your Internet/network connection. If you wish to
    connect your computer to the Internet or to a local network, click "%s".
    Mandrake Linux will attempt to autodetect network devices and modems. If
    this detection fails, uncheck the "%s" box. You may also choose not to
    configure the network, or to do it later, in which case clicking the "%s"
    button will take you to the next step.
    
    When configuring your network, the available connections options are:
    traditional modem, ISDN modem, ADSL connection, cable modem, and finally a
    simple LAN connection (Ethernet).
    
    We will not detail each configuration option - just make sure that you have
    all the parameters, such as IP address, default gateway, DNS servers, etc.
    from your Internet Service Provider or system administrator.
    
    You can consult the ``Starter Guide'' chapter about Internet connections
    for details about the configuration, or simply wait until your system is
    installed and use the program described there to configure your connection.
target: Issa jmiss li tissettja l-konnessjoni mal-internet/network. Jekk trid tqabbad
    il-kompjuter mal-internet jew ma' network lokali, klikkja "%s" biex tħaddem
    programm li jsib u jikkonfigura l-apparat meħtieġ. Jekk dan il-programm ma 
    jsibx l-apparat meħtieġ, neħħi l-marka minn "%s" qabel terġa'
    tipprova. Tista' wkoll tagħżel li ma nikkonfigurax in-network, jew li tissettjah
    iżjed tard; f'dan il-każ sempliċiment agħfas il-buttuna "%s".
    
    It-tipi ta' konnessjoni disponibbli huma: modem tradizzjonali, modem ISDN,
    konnessjoni ADSL, modem cable, kif ukoll konnessjoni sempliċi LAN (Ethernet).
    
    Hawnhekk mhux se nidħlu fid-dettall ta' kull tip ta' konfigurazzjoni. 
    Sempliċiment aċċerta li għandek il-parametri kollha minngħand l-ISP jew
    amministratur tas-sistema tiegħek.
    
    Tista' tikkonsulta l-kapitlu fil-manwal dwar il-konnessjonijiet tal-internet
    għal iżjed tagħrif, jew inkella installa l-kumplament tas-sistema imbagħad
    uża l-programm imsemmi f'dan il-manwal biex tissettja l-konnessjoni.

en: You will receive an alert if one of the selected services is no longer running
target: Tirċievi twissija jekk wieħed minn dawn is-servizzi ma jibqax jaħdem

en: You will receive an alert if the load is higher than this value
target: Tirċievi twissija jekk it-tagħbija taqbeż dan il-valur

en: You'll need to reboot before the modification can take place
target: Trid tirristartja sabiex il-bidliet ikollhom effett.

en: Your %s has been configured.
    You may now scan documents using "XSane" from Multimedia/Graphics in the applications menu.
target: %s issa ġie konfigurat.
    Tista' tiskannja dokumenti permezz ta' XSane taħt Multimedia/Grafika fil-menu tal-programmi.

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.
target: Il-partizzjoni tal-Windows hija mgerfxa wisq. Jekk jogħġbok ħaddem "defrag".

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.
    DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER.
    Il-kard tiegħek hija magħrufa minn XFree %s, li jista' jkollu sapport aħjar 2D.

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D, imma b' XFree %s biss.
    Il-kard tiegħek hija magħrufa minn XFree %s, li jista' jkollu sapport aħjar 2D.

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
target: Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.
    DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER.

en: Your card can have 3D hardware acceleration support with XFree %s.
target: Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.

en: Your choice? (0/1, default `%s')
target: L-għażla tiegħek? (0/1, impliċitu: %s)

en: Your choice? (default %s)
target: L-għażla tiegħek? (impliċita: %s)

en: Your choice? (default `%s'%s)
target: L-għażla tiegħek? (impliċita: "%s"%s)

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
target: Il-kard ta' grafika tiegħek donnha għandha konnessjoni TV-OUT.
    Tista' tiġi kkonfigurata biex taħdem bil-framebuffer.
    
    Biex tagħmel dan trid tqabbad il-kard grafika mat-televiżjoni qabel tixgħel il-kompjuter.
    Imbagħad agħżel "TVout" fil-bootloader.
    
    Għandek din il-faċilità?

en: Your modem isn't supported by the system.
    Take a look at http://www.linmodems.org
target: Il-modem tiegħek mhux sappportit mis-sistema.
    Ara http://www.linmodems.org

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
target: L-apparat multi-funzjoni ġie konfigurat awtomatikament biex ikun jista' jiskannja. Issa tista' tiskannja bil-programm "scanimage " ("scanimage -d hp:%s" biex tispeċifika l-iskaner jekk għandek iżjed minn wieħed) mil-linja ta' kmand, inkella bil-programmi grafiċi "xscanimage" jew "xsane". Jekk qed tuża l-GIMP, tista' tiskannja wkoll billi tuża l-menu "File / Acquire". Tista' tuża "man scanimage" fuq il-linja tal-kmand għal iżjed tagħrif.
    
    Tużax "scannerdrake" għal dan l-apparat!

en: Your personal phone number
target: Numru tat-telefon tiegħek

en: Your printer model
target: Il-mudell tal-printer tiegħek

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
target: Il-printer ġie konfigurat awtomatikament biex jagħtik aċċess għall-"photo card drive" mill-PC. Issa tista' taċċessa l-photo cards mill-programm grafiku "MToolsFM" (Menu: Applikazzjonijiet -> Għodda tal-fajls -> Maniġġjar tal-fajls MTools) jew mil-linja tal-kmand "mtools" (daħħal il-kmand "man mtools" għal iżjed tagħrif). Issib il-filesystem tal-kard taħt l-ittra "p:", jew l-ittri sussegwenti jekk għandek iżjed minn printer wieħed b'photo card. F' "MToolsFM" tista' taqleb bejn ittri tad-drajv mill-kaxxa ta' fuq fil-lemin tal-lista ta' fajls.

en: Your system does not have enough space left for installation or upgrade (%d > %d)
target: Is-sistema m'għandiex biżżejjed spazju għall-installazzjoni jew aġġornament (%d > %d)

en: Your system is low on resources. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
target: Is-sistema hija nieqsa mir-riżorsi. Jista' jkollok problema biex tinstalla 
    l-Mandrake Linux. Jekk jiġri dan, ipprova installazzjoni testwali. Għal dan,
    agħfas F1 meta titla' s-CD, imbagħad ittajpja "text".

en: Yugoslavian (latin)
target: Jugoslav (latin)

en: Zambia
target: Żambja

en: Zimbabwe
target: Żimbabwe

en: [keyboard]
target: [tastiera]

en: _: load here is a noun, the load of the system
    Load
target: Tella'

en: a number
target: numru

en: access to X programs
target: aċċess għall-programmi X

en: access to administrative files
target: aċċess għall-fajls amministrattivi

en: access to compilation tools
target: aċċess għall-għodda tal-kompilazzjoni

en: access to network tools
target: aċċess għall-għodda tan-network

en: access to rpm tools
target: aċċess għall-għodda rpm

en: alert configuration
target: konfigurazzjoni tal-allerti

en: allow "su"
target: ippermetti "su"

en: and one unknown printer
target: u printer wieħed mhux magħruf

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
target: apmd jintuża biex tiċċekkja l-istatus tal-batterija ta' laptop u żżomm
    rikordju fis-syslog. Jista' jintuża wkoll biex jintefa' awtomatikament
    beta l-batterija titbaxxa wisq.

en: average
target: medju

en: browse
target: fittex

en: but not matching
target: li ma jaqblux

en: cable connection detected
target: konnessjoni cable misjuba

en: choose device
target: agħżel apparat

en: choose image file
target: agħżel fajl bl-istampa

en: chunk size
target: daqs ta' "chunk"

en: class of hardware device
target: klassi ta' apparat ħardwer

en: click here if you are sure.
target: Klikkja hawn jekk inti ċert

en: comma separated numbers
target: numri separati b'virgoli

en: comma separated strings
target: strings separati b'virgoli

en: commands before booting, or 'c' for a command-line.
target: il-kmand qabel tibda', jew 'c' ghal linja ta' kmand.

en: consolehelper missing
target: consolehelper nieqes

en: could not find any font in your mounted partitions
target: ma stajtx insib fonts fuq il-partizzjonijiet immuntati

en: could not find any font.
target: ma stajtx insib fonts.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
target: cron huwa programm standard tal-UNIX li jħaddem programmi speċifikati 
    mill-user f'ħinijiet speċifiċi. Vixie cron iżid numru ta' fattizzi lill-
    cron bażiku tal-UNIX, inkluż sigurtà aħjar u konfigurazzjoni iżjed b'saħħitha.

en: daily
target: kuljum

en: default
target: standard

en: detected
target: misjub

en: detected %s
target: %s misjub

en: detected on port %s
target: misjub fuq port %s

en: device
target: apparat

en: dhcpd Config...
target: Konfigurazzjoni dhcpd...

en: dhcpd Server Configuration
target: Konfigurazzjoni server dhcpd

en: disable
target: itfi

en: dismiss
target: ikkanċella

en: done
target: lest

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
target: konfiguratur drakfirewall
    
    Aċċerta li kkonfigurajt l-aċċess għan-network/internet minn
    drakconnect qabel tkompli.

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
target: Konfiguratur drakfirewall
    
    Dan jikkonfigura firewall personali għal din is-sistema Mandrake Linux.
    Għal kompjuter firewall dedikat, jekk jogħġbok ara d-distribuzzjoni
    speċjalizzata MandrakeSecurity Firewall.

en: early pentiums were buggy and freezed when decoding the F00F bytecode
target: pentiums antiki kellhom żball u kienu jieqfu meta jsibu l-kodiċi F00F

en: enable
target: ħaddem

en: enable radio support
target: ippermetti sapport għal radju

en: error unmounting %s: %s
target: problema fl-iżmuntar ta' %s: %s

en: ethernet card(s) detected
target: kard/s ethernet misjuba

en: family of the cpu (eg: 6 for i686 class)
target: familja tas-CPU (eż: 6 għal klassi i686)

en: file list sent by FTP: %s
target: lista ta' fajls mibgħuta bl-FTP: %s

en: final resolution
target: reżoluzzjoni finali

en: first step creation
target: l-ewwel pass - ħolqien

en: force
target: ġiegħel

en: generate auto-install floppy
target: Oħloq flopi awto-installazzjoni

en: hard disk model
target: mudell tal-ħard disk

en: here if no.
target: Klikkja hawn jekk m'intix ċert.

en: high
target: għoli

en: hourly
target: kull siegħa

en: if needed
target: jekk meħtieġ

en: if set to yes, check additions/removals of suid root files.
target: jekk mixgħul, jiċċekkja ż-żieda jew tneħħija ta' fajls suid root.

en: if set to yes, check for :
    
    - empty passwords,
    
    - no password in /etc/shadow
    
    - for users with the 0 id other than root.
target: Jekk mixgħul, jiċċekkja :
    
    - passwords vojta,
    
    - ebda password f' /etc/shadow
    
    - għal users b'id 0 li mhux root.

en: if set to yes, report check result by mail.
target: jekk mixgħul, jibgħad ir-rapport tar-riżultat bl-imejl.

en: if set to yes, report check result to syslog.
target: jekk mixgħul, ibgħat riżultati fuq syslog.

en: if set to yes, reports check result to tty.
target: jekk mixgħul, rapporti jintbagħatu fuq tty

en: if set to yes, run the daily security checks.
target: jekk mixgħul, iħaddem it-testijiet tas-sigurtà ta' kuljum.

en: if set to yes, verify checksum of the suid/sgid files.
target: jekk mixgħul, jivverifika l-integrità ta' fajls suid/sgid.

en: if set, send the mail report to this email address else send it to root.
target: jekk mixgħul, ibgħat rapport bl-imejl f'dan l-indirizz, inkella root.

en: important
target: importanti

en: information level that can be obtained through the cpuid instruction
target: livell ta' informazzjoni li jista' jinkiseb permezz tal-istruzzjoni cpuid

en: kdesu missing
target: kdesu nieqes

en: level
target: livell

en: local config: false
target: konfig. lokali: le

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
target: lpd huwa daemon tal-ipprintjar li huwa meħtieġ biex jaħdem sew l-lpr.
    Huwa bażikament server li jqassam xogħol ta' pprintjar lill-printer/s.

en: maybe
target: forsi

en: mkinitrd optional arguments
target: argumenti opzjonali mkinitrd

en: mkraid failed
target: mkraid falla

en: mkraid failed (maybe raidtools are missing?)
target: mkraid falla (forsi raidtools m'hux installat?)

en: monthly
target: kull xahar

en: mount failed:
target: immuntar falla:

en: mounting partition %s in directory %s failed
target: immuntar ta' partizzjoni %s fid-direttorju %s falla

en: must have
target: neċessarju

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
target: named (BIND) huwa "Domain Name Server" (DNS) li jirrisolvi l-indirizz IP minn isem ta' kompjuter.

en: network printer port
target: port tal- printer tan-network

en: new
target: ġdid

en: nice
target: tajjeb

en: no
target: le

en: no fonts found
target: ma nstabux fonts

en: none
target: ebda

en: not configured
target: mhux konfigurat

en: not enough room in /boot
target: M'hemmx biżżejjed spazju fuq /boot

en: number of capture buffers for mmap'ed capture
target: numru ta' buffers għall-kattura mmapp

en: old static device name used in dev package
target: Isem ta' apparat antik użat fil-pakkett dev

en: omit raid modules
target: neħħi moduli RAID

en: omit scsi modules
target: neħħi moduli SCSI

en: on channel %d id %d
target: fuq kanal %d id %d

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
target: pakkett ImageMagick huwa meħtieġ biex taħdem tajjeb. Klikkja 
    "Ok" biex tinstalla "IMageMagick" jew "Ikkanċella" biex toħroġ.

en: paranoid
target: paranojku

en: parse all fonts
target: fittex fonts kollha

en: partition %s
target: partizzjoni %s

en: partition %s is now known as %s
target: partizzjoni %s issa magħrufa bħala %s

en: please choose the date to restore
target: jekk jogħġbok agħżel data biex tirrestawra

en: please wait during ttmkfdir...
target: stenna sakemm għaddej ttmkfdir...

en: please wait, parsing file: %s
target: stenna ftit, qed jinqara l-fajl: %s

en: primary
target: ewlieni

en: reconfigure
target: ri-irrikonfigura

en: running
target: imtella'

en: saving Bootsplash theme...
target: qed tinkiteb tema bootsplash...

en: search
target: fittex

en: secondary
target: sekondarju

en: select path to restore (instead of /)
target: Agħżel direttorju biex tirrestawra (minflok / )

en: serial
target: serjali

en: service setting
target: seting tas-servizz

en: simple
target: sempliċi

en: size of the (second level) cpu cache
target: daqs tal-cache tas-CPU (tieni livell)

en: special capacities of the driver (burning ability and or DVD support)
target: kapaċitajiet speċjali tad-drajver (ħruq ta' CDs jew sapport għal DVDs)

en: stopped
target: imwaqqaf

en: text box height
target: għoli tal-kaxxa tat-test

en: text width
target: wisa' tat-test

en: the color of the progress bar
target: kulur tal-kaxxa tal-progress

en: the height of the progress bar
target: għoli tal-kaxxa tal-progress

en: the list of alternative drivers for this sound card
target: lista ta' drajvers alternattivi għal din il-kard tal-awdjo

en: the module of the GNU/Linux kernel that handles the device
target: il-modulu tal-kernel GNU/Linux li jieħu ħsieb dan l-apparat

en: the progress bar x coordinate
    of its upper left corner
target: koordinat x tal-kaxxa
    tal-progress, rokna tax-xellug fuq

en: the progress bar y coordinate
    of its upper left corner
target: koordinat y tal-kaxxa
    tal-progress, rokna tax-xellug fuq

en: the vendor name of the device
target: isem il-venditur tal-apparat

en: the vendor name of the processor
target: isem il-venditur tal-proċessatur

en: the width of the progress bar
target: wisa' tal-kaxxa tal-progress

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
target: Dan huwa l-"bus" fiżiku fejn huwa mqabbad l-apparat (eż, PCI, USB eċċ)

en: type1inst building
target: qed nibni type1inst

en: use dhcp
target: uża dhcp

en: use pppoe
target: uża pppoe

en: use pptp
target: uża pptp

en: very nice
target: tajjeb ħafna

en: weekly
target: kull ġimgħa

en: when checked, owner and group won't be changed
target: meta mmarkat, is-sid u l-grupp ma jinbidlux

en: whether this cpu has the Cyrix 6x86 Coma bug
target: jekk dan is-CPU għandux il-bug "Cyrix 6x86 Coma"

en: with /usr
target: b' /usr

en: x coordinate of text box
    in number of characters
target: pożizzjoni x tal-kaxxa
    tat-test bħala karattri

en: xfs restart
target: irristartja l-xfs

en: y coordinate of text box
    in number of characters
target: pożizzjoni y tal-kaxxa
    tat-test bħala karattri

en: yes
target: iva
