DrakX 0.1 - en to unknown language translation catalogue (2462 entries)

en: 		 user name: %s
    		 on path: %s
target: 		 name pengguna: %s
    		 di path: %s

en: 		Erase=%s
target: 		Hapus=%s

en: 	-Network by FTP.
target: 	-Network dg FTP.

en: 	-Network by SSH.
target: 	-Network dg SSH.

en: 	-Network by rsync.
target: 	-Network dg rsync.

en: 	-Network by webdav.
target: 	-Network dg webdav.

en: 	Backups use tar and bzip2
target: 	Backup dengan tar dan bzip2

en: 	Backups use tar and gzip
target: 	Backup dengan tar dan gzip

en: 	Do not include System Files
target: 	Jangan masukkan File Sistem

en: 	Send mail to %s
target: 	Kirim mail ke %s

en: 	Use .backupignore files
target: 	Pakai file .backupignore

en: 
    
    
    Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type "sndconfig" in a console.
target: 
    
    
    Catatan: jika Anda punya kartu suara PnP ISA, Anda harus menggunakan sndconfig.  Ketikkan "sndconfig" di konsol.

en: 
    
     Thanks:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>
target: 
    
     Terimakasih:
    	- LTSP Project http://www.ltsp.org
    	- Michael Brown <mbrown\@fensystems.co.uk>

en: 
    
    (WARNING! You're using XFS for your root partition,
    creating a bootdisk on a 1.44 Mb floppy will probably fail,
    because XFS needs a very large driver).
target: 
    
    (PERINGATAN! Anda menggunakan XFS untuk partisi root,
    pembuatan bootdisk di disket 1.44 Mb mungkin gagal,
    karena XFS perlu driver amat besar).

en: 
    
    Enter a Zeroconf host name without any dot if you don't
    want to use the default host name.
target: 
    
    Masukkan nama host Zeroconf tanpa titik jika Anda tak ingin menggunakan
    nama host yg disediakan.

en: 
    
    Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or "Raw printer" is highlighted.
target: 
    
    Periksa apakah Printerdrake mendeteksi otomatis model printer Anda dengan benar. Cari model yang benar di daftar jika model yang salah atau "Printer raw" diterangkan.

en: 
    
    Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.
target: 
    
    Printerdrake tak dapat menentukan model printer %s Anda. Pilihlah model yg benar dari daftar.

en: 
    
    Your card currently use the %s"%s" driver (default driver for your card is "%s")
target: 
    
    Kartu Anda kini memakai driver %s"%s" (driver standar kartu Anda adalah "%s")

en: 
                          DrakBackup Daemon Report
target: 
                          Laporan Daemon DrakBackup

en: 
                          DrakBackup Report
target: 
                          Laporan DrakBackup

en: 
                        DrakBackup Report Details
target: 
                        Detil Laporan DrakBackup

en: 
     Copyright (C) 2002 by MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com
target: 
     Hak cipta (C) 2002 by MandrakeSoft 
    	Stew Benedict sbenedict\@mandrakesoft.com

en: 
     FTP connection problem: It was not possible to send your backup files by FTP.
target: 
     Problem koneksi FTP: Gagal mengirim file backup dengan FTP.

en: 
    - Burn to CD
target: 
    - Bakar ke CD

en: 
    - Delete hard drive tar files after backup.
target: 
    - Hapus file tar harddisk setelah backup.

en: 
    - Options:
target: 
    - Opsi:

en: 
    - Other Files:
target: 
    - File Lain:

en: 
    - Save on Hard drive on path: %s
target: 
    - Simpan di Hard drive di path: %s

en: 
    - Save to Tape on device: %s
target: 
    - Simpan ke tape di alat: %s

en: 
    - Save via %s on host: %s
target: 
    - Simpan via %s di host: %s

en: 
    - System Files:
target: 
    - File Sistem:

en: 
    - User Files:
target: 
    - File Pengguna:

en: 
    Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.
target: 
    Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS asli tak dapat ditransfer.

en: 
    Backup Sources:
target: 
    Sumber Backup:

en: 
    Chances are, this partition is
    a Driver partition. You should
    probably leave it alone.
target: 
    Mungkin partisi ini adalah 
    partisi Driver, sebaiknya
    biarkan begitu saja.

en: 
    Congratulations, your printer is now installed and configured!
    
    You can print using the "Print" command of your application (usually in the "File" menu).
    
    If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select "Printer" in the "Hardware" section of the Mandrake Control Center.
target: 
    Selamat, printer Anda kini terinstal dan terkonfigurasi!
    
    Anda dapat mencetak dg perintah "Cetak" di aplikasi Anda (biasanya di menu "File").
    
    Jika Anda ingin menambah, menghapus atau mengubah nama printer, atau jika ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), pilih "Printer" di bagian "Perangkat Keras" Pusat Kontrol Mandrake.

en: 
    Drakbackup activities via %s:
target: 
    Aktivitas drakbackup via %s:

en: 
    Drakbackup activities via CD:
target: 
    Aktivitas drakbackup via CD:

en: 
    Drakbackup activities via tape:
target: 
    Aktivitas drakbackup via tape:

en: 
    If you have an ISA card, the values on the next screen should be right.
    
    If you have a PCMCIA card, you have to know the "irq" and "io" of your card.
target: 
    Bila Anda punya card ISA, konfigurasi pada layar berikut nanti harusnya sudah benar.
    
    Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io kartu Anda itu.

en: 
    Mark the printers which you want to transfer and click 
    "Transfer".
target: 
    Tandai printer yg ingin Anda transfer lalu klik"Transfer".

en: 
    Please check all options that you need.
target: 
    Periksa semua opsi yang Anda inginkan.

en: 
    Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.
target: 
    Printer pada server CUPS remote tak perlu dikonfigurasikan di sini; printer ini akan secara otomatis dideteksi.

en: 
    Select the theme for
    lilo and bootsplash,
    you can choose
    them separately
target: 
    Pilih tema untuk
    lilo dan bootsplash,
    Anda dapat memilih
    secara terpisah

en: 
    The "%s" and "%s" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Komando "%s" dan "%s" juga memungkinkan modifikasi setting opsi job cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya "%s <file>".

en: 
    The "%s" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. "%s <file>".
target: 
    Komando "%s" juga memungkinkan modifikasi setting job cetak tertentu. Tambahkan setting yang diinginkan ke baris perintah, mis. "%s <file>".

en: 
    There are %d unknown printers directly connected to your system
target: 
    %d printer tak dikenal terhubung langsung dengan sistem Anda

en: 
    There is one unknown printer directly connected to your system
target: 
    Sebuah printer tak dikenal terhubung langsung dengan sistem Anda

en: 
    This special Bootstrap
    partition is for
    dual-booting your system.
target: 
    partisi ini adalah partisi bootstrap
    yang khusus digunakan 
    oleh sistem dual boot.

en: 
    Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]
target: 
    Pemakaian: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version]

en: 
    Warning
    
    Please read carefully the terms below. If you disagree with any
    portion, you are not allowed to install the next CD media. Press 'Refuse' 
    to continue the installation without using these media.
    
    
    Some components contained in the next CD media are not governed
    by the GPL License or similar agreements. Each such component is then
    governed by the terms and conditions of its own specific license. 
    Please read carefully and comply with such specific licenses before 
    you use or redistribute the said components. 
    Such licenses will in general prevent the transfer,  duplication 
    (except for backup purposes), redistribution, reverse engineering, 
    de-assembly, de-compilation or modification of the component. 
    Any breach of agreement will immediately terminate your rights under 
    the specific license. Unless the specific license terms grant you such
    rights, you usually cannot install the programs on more than one
    system, or adapt it to be used on a network. In doubt, please contact 
    directly the distributor or editor of the component. 
    Transfer to third parties or copying of such components including the 
    documentation is usually forbidden.
    
    
    All rights to the components of the next CD media belong to their 
    respective authors and are protected by intellectual property and 
    copyright laws applicable to software programs.
target: 
    Peringatan
    
    Mohon dibaca dulu semua ketentuan di bawah. Bila Anda tidak setuju dengan salah satu bagiannya
    Anda tidak dapat menginstal media CD berikutnya. Silakan tekan 'Tolak' untuk melanjutkan instalasi
    tanpa menggunakan media ini.
    
    
    Ada beberapa komponen yang ada di media CD berikutnya tidak dilepas dalam lisensi GPL atau perjanjian
    sejenis. Komponen-komponen itu diatur dalam ketentuan dan kondisi dalam lisensi yang bersangkutan.
    Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda menyebarkan komponen tersebut.
    Model lisensi tersebut akan melarang proses transfer, duplikasi (kecuali untuk alasan backup), penyebaran
    kembali, rekayasa ulang, de-assembly, de-kompilasi, atau modifikasi pada komponen tersebut.
    Tiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak Anda dalam lisensi tersebut.
    Kecuali bila dibolehkan, Anda tidak dapat menginstall program ini dalam lebih dari satu sistem
    atau menggunakannya di jaringan. Bila Anda masih ragu, silakan huibungi langsung distributor
    atau editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak ketiga atau mengkopinya.
    
    
    Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuatnya masing-masing
    dan dilindungi oleh hukum hak cipta dan hak intelektual khusus untuk program komputer.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
    
    It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.
target: 
    Selamat Datang di Dukun Setup Printer
    
    Dukun ini dapat menginstal printer lokal atau remote utk digunakan dari mesin ini dan juga dari mesin lain di network.
    
    Dia akan menanyai semua info yg dibutuhkan utk menset up printer dan memberi Anda akses ke semua driver printer tersedia, opsi driver, dan tipe koneksi printer.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Selamat Datang di Penolong Setup Printer
    
    Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini atau jaringan.
    
    Jika Anda punya printer terhubung dg mesin ini, hubungkan dan nyalakan sehingga ia/mereka dapat dideteksi. Juga printer jaringan harus terhubung dan dinyalakan.
    
    Ingat, deteksi printer jaringan membutuhkan waktu lebih lama daripada printer yg terhubung langsung dg mesin ini. Matikan deteksi printer jaringan jika tak perlu.
    
     Klik "Lanjut" jika siap, dan "Batal" jika Anda tak ingin men-setup printer sekarang.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
    
    Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
    
    Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Selamat Datang di Penolong Setup Printer
    
    Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini, dg jaringan atau dg mesin Mindows remote.
    
    Hubungkan dan nyalakan semua printer yg terhubung dg mesin ini agar dapat dideteksi. Juga printer jaringan dan mesin Mindows harus terhubung dan dinyalakan.
    
    Ingat, deteksi printer jaringan butuh waktu lebih lama daripada printer yg terhubung langsung dg mesin ini. Matikan deteksi printer jaringan dan/atau Mindows jika tak perlu.
    
     Klik "Lanjut" jika siap, dan "Batal" jika Anda tak ingin men-setup printer sekarang.

en: 
    Welcome to the Printer Setup Wizard
    
    This wizard will help you to install your printer(s) connected to this computer.
    
    If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.
    
     Click on "Next" when you are ready, and on "Cancel" if you do not want to set up your printer(s) now.
target: 
    Selamat Datang di Penolong Setup Printer
    
    Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini.
    
    Jika Anda punya printer terhubung dg mesin ini, hubungkan dan nyalakan sehingga dapat dideteksi.
    
     Klik "Lanjut" jika siap, dan "Batal" jika Anda tak ingin men-setup printer sekarang.

en: 
    Welcome.
    
    The parameters of the auto-install are available in the sections on the left
target: 
    Selamat Datang.
    
    Parameter instalasi otomatis tersedia di bagian sebelah kiri

en:           All of your selected data have been
target:           Semua data terpilih telah

en:           Successfuly Restored on %s
target:           Berhasil Direstorasi di %s

en:          Restore Configuration
target:          Restorasi Konfigurasi

en:         - /etc/xinetd.d/tftp:
            	drakTermServ will configure this file to work in conjunction with the images created
            	by mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to 
            	each diskless client.
    
            	A typical tftp configuration file looks like:
            		
            	service tftp
    			{
                            disable         = no
                            socket_type  = dgram
                            protocol        = udp
                            wait             = yes
                            user             = root
                            server          = /usr/sbin/in.tftpd
                            server_args  = -s /var/lib/tftpboot
            	}
            		
            	The changes here from the default installation are changing the disable flag to
            	'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net
            	puts its images.
target:         - /etc/xinetd.d/tftp:
            		drakTermServ mengkonfigurasikan file ini agar bekerja dlm hubungan dg image yg dibuat oleh
            		mkinitrd-net, dan entri di /etc/dhcpd.conf, utk melayani image boot ke tiap
            		klien diskless.
    
            		Contoh file konfigurasi tftp:
            		
            	service tftp
    			{
                            disable         = no
                            socket_type  = dgram
                            protocol        = udp
                            wait             = yes
                            user             = root
                            server          = /usr/sbin/in.tftpd
                            server_args  = -s /var/lib/tftpboot
            	}
            		
            		Perubahan dari instalasi standar adalah flag disable jadi 'no'
            		dan path direktori jadi /var/lib/tftpboot, tempat mkinitrd-net
            		menaruh image.

en:         - Maintain %s:
            	For users to be able to log into the system from a diskless client, their entry in
            	/etc/shadow needs to be duplicated in %s. drakTermServ
            	helps in this respect by adding or removing system users from this file.
target:         - Rawat %s:
            		Agar pengguna dapat login ke sistem dari klien diskless, entri
            		di /etc/shadow harus disalin ke %s. drakTermServ membantu
            		hal ini dg menambahkan/hapus pengguna sistem dari file ini.

en:         - Maintain /etc/dhcpd.conf:
            	To net boot clients, each client needs a dhcpd.conf entry, assigning an IP 
            	address and net boot images to the machine. drakTermServ helps create/remove 
            	these entries.
    			
            	(PCI cards may omit the image - etherboot will request the correct image. 
    			You should also consider that when etherboot looks for the images, it expects 
    			names like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).
    			 
            	A typical dhcpd.conf stanza to support a diskless client looks like:
target:         - Rawat /etc/dhcpd.conf:
            		Utk me-net_boot klien, tiap klien perlu entri dhcpd.conf, menunjuk alamat IP
            		dan image net boot ke mesin. drakTermServ menolong membuat/hapus entri ini.
    			
            		(Kartu PCI mungkin mengabaikan image - etherboot akan meminta image yg benar. Ingat
            		bila etherboot mencari images, ia mengharap nama seperti
            		boot-3c59x.nbi, bukan boot-3c59x.2.4.19-16mdk.nbi).
    			 
            		Contoh dhcpd.conf yg men-support klien diskless:

en:         - Maintain /etc/exports:
            	Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
            	sets up the correct entry to allow anonymous access to the root filesystem from
            	diskless clients.
    
            	A typical exports entry for clusternfs is:
            		
            	/					(ro,all_squash)
            	/home				SUBNET/MASK(rw,root_squash)
    			
            	With SUBNET/MASK being defined for your network.
target:         - Rawat /etc/exports:
            		Clusternfs memungkinkan ekspor sistem file root ke klien diskless. drakTermServ
            		mensetup entri utk mengizinkan akses anonim ke sistem file root
            		dari klien diskless.
    
            		Contoh entri ekspor clusternfs:
            		
            	/					(ro,all_squash)
            	/home				SUBNET/MASK(rw,root_squash)
    			
    			Dg SUBNET/MASK terdefinisikan utk jaringan Anda.

en:         - Per client %s:
            	Through clusternfs, each diskless client can have its own unique configuration files
            	on the root filesystem of the server. By allowing local client hardware configuration, 
            	drakTermServ will help create these files.
target:         - %s masing-masing klien:
            		Via clusternfs, tiap klien diskless dapat memiliki file konfigurasi sendiri
            		di sistemfile root server. drakTermServ nantinya akan membantu
            		membuat file-file ini.

en:         While you can use a pool of IP addresses, rather than setup a specific entry for
            a client machine, using a fixed address scheme facilitates using the functionality
            of client-specific configuration files that ClusterNFS provides.
    			
            Note: The '#type' entry is only used by drakTermServ.  Clients can either be 'thin'
            or 'fat'.  Thin clients run most software on the server via xdmcp, while fat clients run 
            most software on the client machine. A special inittab, %s is
            written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are 
            modified if thin clients are used, to enable xdmcp. Since there are security issues in 
            using xdmcp, hosts.deny and hosts.allow are modified to limit access to the local
            subnet.
    			
            Note: The '#hdw_config' entry is also only used by drakTermServ.  Clients can either 
            be 'true' or 'false'.  'true' enables root login at the client machine and allows local 
            hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled 
            by creating separate config files associated with the client's IP address and creating 
            read/write mount points to allow the client to alter the file. Once you are satisfied 
            with the configuration, you can remove root login privileges from the client.
    			
            Note: You must stop/start the server after adding or changing clients.
target: 			Anda dapat memakai pool alamat IP, bukannya satu entri perklien dg
    			alamat tetap, dg menggunakan fungsi file konfigurasi spesifik-klien
    			yg disajikan oleh ClusterNFS.
    			
    			Catatan: Entri "#type" hanya dipakai oleh drakTermServ. Klien dapat berupa "kurus"
    			atau 'gemuk'. Klien kurus menjalankan sebagian besar software di server via xdmcp, sementara klien gemuk menjalankan sebagian besar
    			software di mesin klien. Pada inittab khusus, %s akan
    			ditulis utk klien kurus. File konfigurasi sistem xdm-config, kdmrc, gdm.conf dimodifikasi
    			jika klien kurus digunakan, utk mengaktifkan xdmcp. Karena ada masalah keamanan dlm penggunaan xdmcp,
    			hosts.deny dan hosts.allow dimodifikasi utk membatasi akses ke subnet lokal.
    			
    			Catatan: Lakukan stop/start server setelah menambahkan/mengubah klien.

en:   <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen
target:   <Tab>/<Alt-Tab> untuk pindah | <Spasi> untuk pilih | <F12> Layar berikut

en:  (Make sure that all your printers are connected and turned on).
target:  (Pastikan semua printer Anda terhubung dan hidup).

en:  (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target:  (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...).

en:  Accept/Refuse broadcasted icmp echo.
target: Terima/Tolak echo icmp tersiar.

en:  Accept/Refuse icmp echo.
target: Terima/Tolak echo icmp.

en:  Activate/Disable daily security check.
target: Aktifkan/Matikan cek keamanan harian.

en:  Enable/Disable sulogin(8) in single user level.
target: Izinkan/Tolak sulogin(8) dalam level pengguna single.

en:  Enabling su only from members of the wheel group or allow su from any user.
target: Izinkan su hanya bagi anggota grup wheel atau izinkan semua pengguna.

en:  Erase Now
target:  Hapus Sekarang

en:  Error while sending mail.
target:  Kesalahan saat pengiriman surat.

en:  If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.
target:  Jika printer yg diinginkan terdeteksi, pilihlah dari daftar lalu tambahkan nama pengguna, katasandi, dan/atau grupkerja jika perlu.

en:  enter `void' for void entry
target: ketikkan `void' untuk entri kosong

en:  on
target:  di

en:  on LPD server "%s", printer "%s"
target:  di server LPD "%s", printer "%s"

en:  on Novell server "%s", printer "%s"
target:  di server Novell "%s", printer "%s"

en:  on SMB/Windows server "%s", share "%s"
target:  di server SMB/Mindows "%s", share "%s"

en:  on device: %s
target:  di device: %s

en:  on parallel port #%s
target:  di port paralel #%s

en: !!! Indicates the password in the system database is different than
     the one in the Terminal Server database.
    Delete/re-add the user to the Terminal Server to enable login.
target: !!! Menunjukkan bhw katasandi di database sistem berbeda dg yg di database
    Server Terminal. Hapus/tambahlah lagi pengguna ke Server Terminal agar
    dapat login.

en: "%s" based winmodem detected, do you want to install needed software ?
target: Winmode basis "%s" terdeteksi, ingin instal software yg diperlukan?

en: "%s" is not a valid email!
target: email "%s" invalid!

en: "%s": check the current country selection. If you are not in this
    country, click on the "%s" button and choose another one. If your country
    is not in the first list shown, click the "%s" button to get the complete
    country list.
target: "%s": cek pilihan negara saat ini. Jika tak berada di sini, klik
    "%s" dan pilih yg lain. Jika negara Anda tak ada di daftar,
    klik "%s" utk mendapatkan daftar lengkap.

en: "%s": clicking on the "%s" button will open the printer configuration
    wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
    information on how to setup a new printer. The interface presented there is
    similar to the one used during installation.
target: "%s": klik "%s" utk membuka konfigurator printer. Baca
    bab yg bersangkutan di ``Pedoman Pemula'' utk info lebih lanjut ttg cara
    setup printer baru. Antarmuka yg ditampilkan di sana sama dg yg dipakai
    saat instalasi.

en: "%s": if a sound card is detected on your system, it is displayed here.
    If you notice the sound card displayed is not the one that is actually
    present on your system, you can click on the button and choose another
    driver.
target: "%s": jika kartu suara terdeteksi di sistem Anda, ia ditampilkan
    di sini. Jika kartu suara yg tampil tak sesuai dg yg ada di sistem, pilih
    driver lain.

en: "Menu" key
target: Kunci "Menu"

en: %d comma separated numbers
target: %d bilangan terpisah koma"

en: %d comma separated strings
target: %d string terpisah koma

en: %d minutes
target: %d menit

en: %d packages
target: %d paket

en: %d seconds
target: %d detik

en: %s BootSplash (%s) preview
target: Prapandang Bootsplash %s (%s)

en: %s already in use
target: %s sudah dipakai

en: %s cannot be displayed 
    . No Help entry of this type
target: %s tak dapat ditampilkan
    . Tiada Pertolongan utk entri tipe ini

en: %s exists, delete?
    
    Warning: If you've already done this process you'll probably
     need to purge the entry from authorized_keys on the server.
target: Ada %s, hapus?
    
    Awas: Jika Anda telah melakukan proses ini Anda mungkin perlu
     membersihkan entri dari authorized_keys pada server.

en: %s fonts conversion
target: konversi font %s

en: %s formatting of %s failed
target: %s proses format dari %s gagal

en: %s found on %s, configure it automatically?
target: %s ditemukan di %s, konfigurasikan secara otomatis?

en: %s is not in the scanner database, configure it manually?
target: %s tak ada di database scanner, konfigurasikan secara manual?

en: %s not found...
target: %s tak ditemukan...

en: %s not responding
target: tak ada respon %s

en: %s on %s
target: %s di %s

en: %s: %s requires a username...
target: %s: %s memerlukan nama pengguna...

en: %s: %s requires hostname...
target: %s: %s memerlukan nama host...

en: (E)IDE/ATA controllers
target: Pengontrol (E)IDE/ATA

en: (Note: Parallel ports cannot be auto-detected)
target: (Catatan: port paralel tak dapat dideteksi secara otomatis)

en: (This) DHCP Server IP
target: IP Server DHCP (Ini)

en: (already added %s)
target: (sudah ditambahkan %s)

en: (default value: %s)
target: (nilai standar: %s)

en: (module %s)
target: (modul %s)

en: (on %s)
target: (di %s)

en: (on this machine)
target: (di mesin ini)

en: , %s sectors
target: , %s sektor

en: , TCP/IP host "%s", port %s
target: , host TCP/IP "%s", port %s

en: , USB printer
target: , printer USB

en: , USB printer #%s
target: , printer USB #%s

en: , multi-function device
target: , alat multifungsi

en: , multi-function device on HP JetDirect
target: , alat multifungsi di HP JetDirect

en: , multi-function device on USB
target: , alat multifungsi di USB

en: , multi-function device on parallel port #%s
target: , alat multifungsi di port paralel #%s

en: , network printer "%s", port %s
target: , printer jaringan "%s", port %s

en: , printer "%s" on SMB/Windows server "%s"
target: , printer "%s" di server SMB/Windows "%s"

en: , printer "%s" on server "%s"
target: , printer "%s" di server "%s"

en: , printing to %s
target: , cetak ke %s

en: , using command %s
target: , menggunakan perintah %s

en: - PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids
target: - Alat PCI dan USB: daftar id PCI/USB vendor, device, subvendor dan subdevice

en: - pci devices: this gives the PCI slot, device and function of this card
    - eide devices: the device is either a slave or a master device
    - scsi devices: the scsi bus and the scsi device ids
target: - alat pci : slot PCI, alat dan fungsi kartu ini
    - alat eide: alat adalah majikan atau budak
    - alat scsi: bus scsi dan id alat scsi

en: /Autodetect _jazz drives
target: /Deteksi otomatis drive _jazz

en: /Autodetect _modems
target: /Deteksi otomatis _modem

en: /Autodetect _printers
target: /Deteksi otomatis _printer

en: /File/Save _As
target: /File/Simpan _Dengan nama lain

en: /File/_New
target: /File/B_aru

en: /File/_Open
target: /File/_Buka

en: /File/_Quit
target: /File/_Keluar

en: /File/_Save
target: /File/_Simpan

en: /Options/Test
target: /Pilihan/Test

en: /_Actions
target: /_Aksi

en: /_Delete
target: /_Hapus

en: /_Fields description
target: /Penjelasan _Field

en: /_Help
target: /_Tolong

en: /_Options
target: /_Pilihan

en: /_Quit
target: /_Keluar

en: /_Refresh
target: /Penyega_ran

en: /_Report Bug
target: /_Laporan Bug

en: /etc/hosts.allow and /etc/hosts.deny already configured - not changed
target: /etc/hosts.allow dan /etc/hosts.deny sudah dikonfigurasikan - tak diubah

en: /etc/issue* exist
target: ada /etc/issue*

en: 1 button
target: 1 tombol

en: 1 minute
target: 1 menit

en: 16 million colors (24 bits)
target: 16 juta warna (24 bit)

en: 2 buttons
target: 2 tombol

en: 256 colors (8 bits)
target: 256 warna (8 bit)

en: 256 kB
target: 256 kb

en: 3 buttons
target: 3 tombol

en: 32 thousand colors (15 bits)
target: 32 ribu warna (15 bit)

en: 4 billion colors (32 bits)
target: 4 milyar warna (32 bit)

en: 512 kB
target: 512 kb

en: 64 MB or more
target: 64 MB atau lebih

en: 65 thousand colors (16 bits)
target: 65 ribu warna (16 bit)

en: <- Previous
target: <- Kembali

en: <-- Del User
target: <-- Hapus Pengguna

en: <-- Delete
target: <-- Hapus

en: <-- Edit Client
target: <-- Edit Klien

en: => Notice, a label changed:
    %s
target: => Catatan, label berubah:
    %s

en: => There are many things to choose from (%s).
target: => Banyak yang dapat dipilih dari (%s).

en: A command line must be entered!
target: Perintah baris harus diisi!

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures. Would you like to create a bootdisk for your system?
    %s
target: Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa
    tergantung pada bootloader. Ini berguna bila Anda tidak mau menginstal
    lilo (atau grub) di sistem Anda, atau saat sistem operasi lain menghapus
    lilo, atau lilo tak bisa digunakan pada konfigurasi hardware Anda.
    Bootdisk ini juga bisa digunakan dengan image rescue Mandrake, yang
    memudahkan kita untuk merecover sistem dari kegagalan. Ingin buat bootdisk?
    %s

en: A custom bootdisk provides a way of booting into your Linux system without
    depending on the normal bootloader. This is useful if you don't want to install
    SILO on your system, or another operating system removes SILO, or SILO doesn't
    work with your hardware configuration. A custom bootdisk can also be used with
    the Mandrake rescue image, making it much easier to recover from severe system
    failures.
    
    If you want to create a bootdisk for your system, insert a floppy in the first
    drive and press "Ok".
target: Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa
    tergantung pada bootloader. Ini berguna bila Anda tidak mau menginstal
    SILO di sistem Anda, atau saat sistem operasi lain menghapus SILO, atau
    SILO tak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga
    bisa digunakan dengan image rescue Mandrake, yang memudahkan kita untuk
    merecover sistem dari kegagalan. Jika Anda mau bikin bootdisk, masukkan
    disket ke drive pertama dan tekan "Ok".

en: A customizable environment
target: Lingkungan tersesuaikan

en: A graphical environment with user-friendly set of applications and desktop tools
target: Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah digunakan

en: A library which defends against buffer overflow and format string attacks.
target: Library penahan serangan string format dan overflow buffer

en: A printer named "%s" already exists under %s. 
    Click "Transfer" to overwrite it.
    You can also type a new name or skip this printer.
target: Printer bernama "%s" telah ada di %s. 
    Klik "Transfer" untuk menindihnya.
    Anda juga dapat menuliskan nama baru atau melewatkan printer ini.

en: A problem occured while restarting the network: 
    
    %s
target: Problem terjadi saat restart jaringan:
    
    %s

en: A tool to monitor your logs
target: Penampil log Anda

en: A valid URI must be entered!
target: Harus diisi URI valid!

en: ADSL connection
target: Koneksi ADSL

en: ALL
target: SEMUA

en: ALL existing partitions and their data will be lost on drive %s
target: SEMUA partisi yang ada beserta data pada drive %s akan hilang

en: Abort
target: Batal

en: About
target: Keterangan

en: About Harddrake
target: Tentang Harddrake

en: Accept
target: Terima

en: Accept bogus IPv4 error messages
target: Terima pesan error IPv4 yg tak benar

en: Accept broadcasted icmp echo
target: Terima echo icmp tersiar

en: Accept icmp echo
target: Terima mode icmp

en: Accept user
target: Buat pengguna baru

en: Accept/Refuse bogus IPv4 error messages.
target: Terima/Tolak pesan error IPv4 yg tak benar.

en: Accessing printers on remote CUPS servers
target: Sedang mengakses printer di server CUPS remote

en: Account Login (user name)
target: Login Account (nama pengguna)

en: Account Password
target: Katasandi Account

en: Across Network
target: lewat Network

en: Activates/Deactivates all network interfaces configured to start
    at boot time.
target: Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala
    pada saat boot.

en: Add
target: Tambah

en: Add Client -->
target: Tambah Klien -->

en: Add User -->
target: Tambah pengguna -->

en: Add a module
target: tambah modul

en: Add a new printer
target: Tambah printer baru

en: Add a new rule at the end
target: Tambah aturan baru di akhir

en: Add a rule
target: Tambah aturan

en: Add a scanner manually
target: Tambah scanner secara manual

en: Add a user
target: Tambahkan pengguna

en: Add an item
target: Tambah item

en: Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network.
target: Tambahkan di sini server CUPS yg printernya ingin Anda pakai. Anda hanya perlu melakukan ini jika server tak menyiarkan info printernya ke jaringan lokal.

en: Add host
target: Tambah host

en: Add host/network
target: Tambahkan host/jaringan

en: Add server
target: Tambah server

en: Add the name as an exception to the handling of password aging by msec.
target: Tambahkan nama sbg eksepsi penanganan umur katasandi dg msec.

en: Add this printer to Star Office/OpenOffice.org/GIMP
target: Tambah printer ini ke Star Office/OpenOffice.org/GIMP

en: Add to LVM
target: Tambahkan ke LVM

en: Add to RAID
target: Tambahkan ke RAID

en: Add user
target: Tambah pengguna

en: Add/Del Clients
target: Tambah/Hapus Klien DHCP

en: Add/Del Users
target: Tambah/Hapus Pengguna

en: Adding printer to Star Office/OpenOffice.org/GIMP
target: Penambahan printer ke Star Office/OpenOffice.org/GIMP

en: Additional CUPS servers:
target: Server CUPS tambahan:

en: Advanced
target: Opsi Lengkap

en: Advanced Configuration
target: Konfigurasi Lanjutan

en: Advanced Options
target: Opsi Lanjutan

en: Advanced preferences
target: Pilihan Lengkap

en: After changing type of partition %s, all data on this partition will be lost
target: Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang

en: After formatting partition %s, all data on this partition will be lost
target: Sehabis memformat partisi %s semua data pada partisi ini akan hilang

en: After resizing partition %s, all data on this partition will be lost
target: Sehabis meresize partisi %s, semua data pada partisi ini akan hilang

en: After this is done, we recommend that you restart your X environment to avoid any hostname-related problems.
target: Setelah itu, silakan restart X Anda agar bebas dari masalah pergantian
    nama host.

en: Albanian
target: Albania

en: Alcatel speedtouch usb
target: usb speedtouch Alcatel

en: Algeria
target: Aljazair

en: All
target: Semua

en: All I/O to the file system should be done synchronously.
target: Semua I/O ke sistem file harus sinkron.

en: All data on this partition should be backed-up
target: Semua data pada partisi ini sebaiknya dibackup dulu

en: All incidents will be followed up by a single qualified MandrakeSoft technical expert.
target: Semua insiden akan di-followup oleh pakar teknis MandrakeSoft berkualitas.

en: All languages
target: Semua bahasa

en: All primary partitions are used
target: Semua partisi primary telah digunakan

en: All remote machines
target: Semua mesin remote

en: Allow Thin Clients
target: Izinkan Klien Thin

en: Allow all users
target: Izinkan semua pengguna

en: Allow an ordinary user to mount the file system. The
    name of the mounting user is written to mtab so that he can unmount the file
    system again. This option implies the options noexec, nosuid, and nodev
    (unless overridden by subsequent options, as in the option line
    user,exec,dev,suid ).
target: Izinkan pengguna biasa me-mount sistem file.
    Nama pe-mount tertulis di mtab sehingga ia dapat meng-unmount sistem file
    lagi. Opsi ini mempengaruhi opsi noexec, nosuid, dan nodev
    (kecuali jika ditindih opsi berikutnya, seperti user,exec,dev,suid di baris
    opsi).

en: Allow local hardware
    configuration.
target: Aktifkan konfigurasi hardware lokal.

en: Allow/Forbid autologin.
target: Izinkan/Larang autologin.

en: Allow/Forbid direct root login.
target: Izinkan/Larang login root langsung.

en: Allow/Forbid reboot by the console user.
target: Izinkan/Larang reboot oleh pengguna konsol.

en: Allow/Forbid the list of users on the system on display managers (kdm and gdm).
target: Izinkan/Larang daftar pengguna sistem di manajer display (kdm dan gdm).

en: Alt and Shift keys simultaneously
target: Alt dan Shift bersamaan

en: Alternative drivers
target: Driver alternatif

en: Alternative test page (A4)
target: Halaman tes alternatif (A4)

en: Alternative test page (Letter)
target: Halaman tes alternatif (Letter)

en: Alternatively, you can specify a device name/file name in the input line
target: Abg alternatif, Anda dapat menentukan nama device/file

en: American Samoa
target: Samoa Amerika

en: Amusement programs: arcade, boards, strategy, etc
target: Program permainan: arcade, board, strategi, dsb

en: An error occurred
target: Ada error

en: An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem
target: Error - tidak ada device yang valid untuk membuat filesystem baru. Periksa kembali hardware untuk mencari penyebabnya

en: An error occurred, but I don't know how to handle it nicely.
    Continue at your own risk.
target: Ada error, tapi cara mengatasinya tak diketahui.
    Jalan terus tapi resiko tanggung sendiri.

en: An error occurred:
    %s
    Try to change some parameters
target: Ada error:
    %s
    Cobalah ganti parameternya

en: An online platform to respond to enterprise support needs.
target: Platform online yang melayani kebutuhan support spesifik perusahaan

en: Anacron is a periodic command scheduler.
target: Skeduler command periodik, Anacron

en: And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos.
target: Mandrake Linux 9.2 memungkinkan Anda menggunakan software mutakhir untuk memainkan file audio, edit dan mengatur gambar/foto, dan melihat video

en: Another one
target: Yang lain

en: Antarctica
target: Antartika

en: Antigua and Barbuda
target: Antigua dan Barbuda

en: Apache World Wide Web Server
target: Server WWW Apache

en: Apache is a World Wide Web server. It is used to serve HTML files and CGI.
target: Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file
    HTML dan CGI.

en: Apache, Pro-ftpd
target: Apache dan Pro-ftpd

en: Append
target: Sambung

en: Application:
target: Aplikasi:

en: Apply
target: Terapkan

en: Apply filter
target: Terapkan filter

en: Arabic
target: Arab

en: Are you sure that you want to set up printing on this machine?
target: Anda yakin ingin men-setup pencetakan di mesin ini?

en: Armenian (old)
target: Armenia (lama)

en: Armenian (phonetic)
target: Armenia (fonetik)

en: Armenian (typewriter)
target: Armenia (mesintik)

en: Assign host name from DHCP address
target: Tentukan nama host dari alamat DHCP

en: Assign raw devices to block devices (such as hard drive
    partitions), for the use of applications such as Oracle or DVD players
target: Tunjuk raw device ke block devices (misalnya partisi hard drive),
    utk digunakan oleh aplikasi semacam Oracle atau player DVD

en: August
target: Agustus

en: Australian Optus cable TV
target: TV kabel Optus Australia

en: Authentication
target: Otentikasi

en: Authentication LDAP
target: Otentikasi LDAP

en: Authentication NIS
target: Otentikasi NIS

en: Authentication Windows Domain
target: Otentikasi Domain Mindows

en: Authorize TCP connections to X Window
target: Sahkan koneksi TCP X Window

en: Authorize all services controlled by tcp_wrappers
target: Sahkan semua servis yg dikontrol oleh tcp_wrappers

en: Authorize:
    
    - all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to "ALL",
    
    - only local ones if set to "LOCAL"
    
    - none if set to "NONE".
    
    To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5)).
target: Sahkan:
    
    - semua servis yg dikontrol oleh tcp_wrappers (lihat manual hosts.deny(5)) jika diset "SEMUA",
    
    - hanya yg lokal jika diset ke "LOKAL"
    
    - tak satu-pun jika diset ke "TIADA".
    
    Utk mensahkan servis yg dibutuhkan, gunakan /etc/hosts.allow (lihat hosts.allow(5)).

en: Authors:
target: Pengarang:

en: Auto Install
target: Instalasi Otomatis

en: Auto Install Configurator
target: Konfigurasi Instalasi Otomatis

en: Auto allocate
target: Alokasi otomatis

en: Auto-detect
target: Deteksi otomatis

en: Auto-detect available ports
target: Deteksi otomatis port tersedia

en: Auto-detect printers connected directly to the local network
target: Deteksi printer yang terhubung dengan jaringan lokal

en: Auto-detect printers connected to machines running Microsoft Windows
target: Deteksi printer yg terhubung dg mesin Microsoft Windows

en: Auto-detect printers connected to this machine
target: Deteksi printer yg terhubung dg mesin ini

en: Auto-detected
target: Otomatis terdeteksi

en: Automated
target: Otomatis

en: Automatic IP
target: IP otomatis

en: Automatic Steps Configuration
target: Konfigurasi Step Otomatis

en: Automatic correction of CUPS configuration
target: Koreksi otomatis konfigurasi CUPS

en: Automatic dependencies
target: Ketergantungan otomatis

en: Automatic detection and configuration of hardware at boot.
target: Deteksi dan konfigurasi otomatis hardware saat boot.

en: Automatic reconfiguration
target: Konfigurasi ulang otomatis

en: Automatic regeneration of kernel header in /boot for
    /usr/include/linux/{autoconf,version}.h
target: Regenerasi otomatis header kernel di /boot utk
    /usr/include/linux/{autoconf,version}.h

en: Automatic time synchronization (using NTP)
target: sinkronisasi waktu otomatis (dg NTP)

en: Automatically find available printers on remote machines
target: Cari printer di mesin lain secara otomatis

en: Automatically switch on numlock key locker under console
    and XFree at boot.
target: Secara otomatis nyalakan numlock saat boot pada console/XFree.

en: Autoprobe
target: Probe otomatis

en: Available printers
target: Printer yg tersedia

en: Azerbaidjani (latin)
target: Azerbaijan (latin)

en: Backup Now
target: Backup Sekarang

en: Backup Now from configuration file
target: Backup Sekarang dari file konfigurasi

en: Backup Other files...
target: Backup file lain...

en: Backup System
target: Backup sistem

en: Backup User files...
target: Backup file pengguna...

en: Backup Users
target: Backup Pengguna

en: Backup files are corrupted
target: File backup rusak

en: Backup files not found at %s.
target: File backup tak ditemukan di %s.

en: Backup other files
target: Backup file lain

en: Backup system files
target: Backup file sistem

en: Backup system files...
target: Backup file sistem...

en: Backup the system files before:
target: Backup file sistem sebelum:

en: Backup user files
target: Backup file pengguna

en: Backup your System files. (/etc directory)
target: Backup file System Anda. (direktori /etc)

en: Bad backup file
target: File backup rusak

en: Bad choice, try again
target: Pilihan salah, silakan ulangi

en: Bad package
target: Paket buruk

en: Bad password on %s
target: Salah katasandi pada %s

en: Bahamas
target: Bahama

en: Basic
target: Biasa

en: Basic options
target: Opsi dasar

en: Be careful: this operation is dangerous.
target: Hati-hati: operasi ini berbahaya

en: Be sure a media is present for the device %s
target: Pastikan media ada di device %s

en: Because you are doing a network installation, your network is already configured.
    Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
target: Jaringan Anda sudah terkonfigurasi lho
    Silakan klik OK untuk rekonfigurasi ulang koneksi jaringan/internet ini, atau batal jika Anda berubah pikiran.

en: Become a MandrakeExpert
target: Jadi AhliMandrake

en: Before installing any fonts, be sure that you have the right to use and install them on your system.
    
    -You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server.
target: Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di sistem Anda.
    
    -Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat membuat server X Anda hang.

en: Belarusian
target: Belarusia

en: Belgian
target: Belgia

en: Belgium
target: Belgia

en: Bengali
target: Bengal

en: Books and Howto's on Linux and Free Software
target: Buku dan Howto untuk Linux dan Free Software

en: Boot Floppy
target: Disket boot

en: Boot ISO
target: ISO boot

en: Boot Protocol
target: Protokol Boot

en: Boot Style Configuration
target: Konfigurasi Tipe Boot

en: Boot device
target: Device boot

en: Bootloader installation
target: Instalasi Bootloader

en: Bootloader main options
target: Parameter Bootloader utama

en: Bootloader to use
target: Bootloader yang hendak digunakan

en: Bosnia and Herzegovina
target: Bosnia Herzegovina

en: Bosnian
target: Bosnia

en: Both Alt keys simultaneously
target: Kedua kunci Alt bersamaan

en: Both Control keys simultaneously
target: Kedua kunci Control bersamaan

en: Both Shift keys simultaneously
target: Kedua Shift bersamaan

en: Bouvet Island
target: Pulau Bouvet

en: Brazilian (ABNT-2)
target: Brazil (ABNT-2)

en: Bridges and system controllers
target: Pengontrol sistem dan bridge

en: Bringing down the network
target: Matikan jaringan

en: Bringing up the network
target: Aktifkan jaringan

en: British Indian Ocean Territory
target: Inggris, Teritori Samudera Indonesia

en: Broadcast Address:
target: Alamat Siaran(Broadcast):

en: Browse
target: Jelajah

en: Browse to new restore repository.
target: Jelajahi repositori restorasi baru.

en: Build All Kernels -->
target: Bangun Semua Kernel -->

en: Build Backup
target: Bangun Backup

en: Build Single NIC -->
target: Bangun NIC Single -->

en: Build Whole Kernel -->
target: Bangun Seluruh Kernel -->

en: Build the disk
target: Buat disk

en: Build the future of Linux!
target: Bangun masa depan Linux!

en: Bulgarian (BDS)
target: Bulgaria (BDS)

en: Bulgarian (phonetic)
target: Bulagaria (fonetik)

en: Bus identification
target: Identifikasi bus

en: Button 2 Emulation
target: Emulasi tombol 2

en: Button 3 Emulation
target: Emulasi tombol 3

en: Button `%s': %s
target: Tombol `%s': %s

en: Buttons emulation
target: Emulasi tombol

en: C and C++ development libraries, programs and include files
target: Librari, program, dan file include untuk pemrograman C dan C++

en: CD in place - continue.
target: CD di tempat - lanjutkan.

en: CD-R / DVD-R
target: CDROM / DVDROM

en: CD/DVD burners
target: Pembakar CD/DVD

en: CDRW media
target: media CDRW

en: CPU flags reported by the kernel
target: Flag CPU yg dilaporkan oleh kernel

en: CUPS configuration
target: konfigurasi CUPS

en: CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
target: CUPS tak men-support printer server Novell atau printer yg mengirim data ke perintah format-bebas.

en: CUPS printer configuration
target: Konfigurasi printer CUPS

en: Cable connection
target: Konfigurasi jaringan kabel

en: Cache size
target: Ukuran cache

en: Calendar
target: Kalender

en: Cambodia
target: Kamboja

en: Cameroon
target: Kamerun

en: Can only be mounted explicitly (i.e.,
    the -a option will not cause the file system to be mounted).
target: Hanya dapat di-mount secara eksplisit
    (opsi -a takkan me-mount sistem file).

en: Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)
target: Akses modul kernel gagal (file %s hilang), ini umumnya dikarenakan disket boot Anda tak sinkron dengan media instalasi (buatlah disket boot baru)

en: Can't add a partition to _formatted_ RAID md%d
target: Tidak dapat menambah partisi ke RAID md%d yang terformat

en: Can't create catalog!
target: Katalog tak dapat dibuat!

en: Can't create log file!
target: File log tak dapat dibuat!

en: Can't find %s on %s
target: %s di %s tak tercari

en: Can't launch mkinitrd -f /boot/initrd-%s.img %s.
target: Tak dapat meluncurkan mkinitrd -f /boot/initrd-%s.img %s.

en: Can't login using username %s (bad password?)
target: Gagal login dg nama pengguna %s (katasandi salah?)

en: Can't make screenshots before partitioning
target: Gagal membuat screenshot sebelum buat partisi

en: Can't relaunch LiLo!
    Launch "lilo" as root in command line to complete LiLo theme installation.
target: Gagal meluncurkan LiLo!
    Luncurkan "lilo" sbg root di baris perintah utk menyelesaikan instalasi tema LiLo.

en: Can't unset mount point as this partition is used for loop back.
    Remove the loopback first
target: Tak bisa unset mount point karena partisi ini sudah digunakan untuk
    loopback. Hapus dulu loopbacknya.

en: Can't use broadcast with no NIS domain
target: Tanpa domain NIS, broadcast tak dapat dipakai

en: Can't write /etc/sysconfig/bootsplash
    File not found.
target: Tak dapat menulis /etc/sysconfig/bootsplash
    File tak ditemukan.

en: Can't write /etc/sysconfig/bootsplash.
target: Tak dapat menulis /etc/sysconfig/bootsplash.

en: Canada
target: Kanada

en: Canada (cable)
target: Kanada (kabel)

en: Canadian (Quebec)
target: Kanada (Quebec)

en: Cancel
target: Batal

en: Cape Verde
target: Tanjung Verde

en: CapsLock key
target: CapsLock

en: Card IO
target: IO kartu

en: Card IO_0
target: IO_0 kartu

en: Card IO_1
target: IO_1 kartu

en: Card IRQ
target: IRQ kartu

en: Card mem (DMA)
target: Mem kartu (DMA)

en: Card model:
target: Model kartu :

en: Cayman Islands
target: Pulau Cayman

en: Cd-Rom labeled "%s"
target: Label CD-ROM "%s"

en: Central African Republic
target: Republik Afrika Tengah

en: Change
    Restore Path
target: Ubah
    Path Restorasi

en: Change Cd-Rom
target: Ganti Cd-Rom

en: Change partition type
target: Mengubah tipe partisi

en: Change the printing system
target: Ubah sistem cetak

en: Change type
target: Ubah tipe

en: Change your Cd-Rom!
    
    Please insert the Cd-Rom labelled "%s" in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid installation from this Cd-Rom.
target: Ganti Cd-Rom!
    
    Masukkan Cd-Rom berlabel "%s" ke drive dan tekan Ok. Jika Anda tak punya,
    tekan Batal untuk menghindari instalasi dari Cd-Rom ini.

en: Channel
target: Kanal

en: Check additions/removals of sgid files
target: Cek penambahan/penghapusan file sgid

en: Check bad blocks?
target: Periksa bad blok?

en: Check empty password in /etc/shadow
target: Cek katasandi kosong di /etc/shadow

en: Check files/directories writable by everybody
target: Cek file/direktori yg dapat ditulisi oleh semua orang

en: Check for unsecured accounts
target: Cek account tak terjaga

en: Checking %s
target: Periksa %s

en: Checking device and configuring HPOJ...
target: Pengecekan alat dan penyetelan HPOJ...

en: Checking installed software...
target: Pemeriksaan perangkat lunak terinstal

en: Checking your system...
target: Pengecekan sistem...

en: China
target: Cina

en: China (broadcast)
target: Cina (siaran)

en: Chkconfig obey msec rules
target: Chkconfig mematuhi aturan msec

en: Choose a file
target: Pilih file

en: Choose a mirror from which to get the packages
target: Pilih mirror tempat Anda ingin mengambil paket program

en: Choose a monitor
target: Pilih monitor

en: Choose a partition
target: Pilih partisi

en: Choose action
target: Pilih aksi

en: Choose an X server
target: Pilih server X

en: Choose an existing LVM to add to
target: Pilih LVM yang ada untuk ditambahkan ke

en: Choose an existing RAID to add to
target: Pilih RAID yang ada untuk ditambahkan ke

en: Choose another partition
target: Pilih partisi lain

en: Choose color
target: Pilih warna

en: Choose file
target: Pilih file

en: Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.
target: Pilih satu printer dari daftar atau isilah namahost atau IP dan nomor port opsional (default 9100).

en: Choose packages to install
target: Paket yang akan diinstal

en: Choose the applications that will support the fonts:
target: Pilih aplikasi yang mensupport font :

en: Choose the connection you want to configure
target: Pilih koneksi yg hendak dikonfigurasi

en: Choose the default user:
target: Pilih pengguna standar:

en: Choose the floppy drive you want to use to make the bootdisk
target: Pilih drive floppy untuk membuat bootdisk

en: Choose the hard drive you want to erase in order to install your new
    Mandrake Linux partition. Be careful, all data present on this partition
    will be lost and will not be recoverable!
target: Pilih harddrive yg akan dihapus utk disediakan bagi partisi
    Linux Mandrake. Hati-hati, semua data di situ akan hilang dan
    tak dapat dikembalikan seperti semula!

en: Choose the host on which the local scanners should be made available:
target: Pilihlah host yg scanner lokalnya akan dibuat agar dapat dipakai:

en: Choose the mount points
target: Pilih lokasi mount

en: Choose the network interface
target: Pilih interface jaringan

en: Choose the network or host on which the local printers should be made available:
target: Pilihlah jaringan/host yg ingin dipakai printer lokalnya:

en: Choose the new size
target: Pilih ukuran baru

en: Choose the packages you want to install
target: Pilih paket yang akan diinstal

en: Choose the partitions you want to format
target: Pilih partisi yang akan diformat

en: Choose the profile to configure
target: Pilih profil yang hendak Anda konfigurasikan

en: Choose the resolution and the color depth
target: Pilih resolusi dan kedalaman warna

en: Choose the sizes
target: Pilih ukurannya

en: Choose the window manager to run:
target: Pilih manajer window yg akan dipakai:

en: Choose which services should be automatically started at boot time
target: Pilih service mana yang hendak dijalankan saat boot scr otomatis

en: Choose your CD/DVD device
target: Pilih device CD/DVD

en: Choose your country
target: Pilih negri Anda

en: Choose your filesystem encryption key
target: Pilih kunci sandi sistem file Anda

en: Choose your keyboard
target: Pilih papanketik

en: Choosing a display manager
target: Pilih manajer display

en: Choosing an arbitrary driver
target: Pilih sebarang driver

en: Christmas Island
target: Pulau Christmas

en: Chunk size %s
target: Ukuran chunk %s

en: Circular mounts %s
target: Mount melingkar %s

en: Clean /tmp at each boot
target: Hapus /tmp saat boot

en: Clear all
target: Hapus semua

en: Click on "%s" if you want to delete all data and partitions present on
    this hard drive. Be careful, after clicking on "%s", you will not be able
    to recover any data and partitions present on this hard drive, including
    any Windows data.
    
    Click on "%s" to stop this operation without losing any data and
    partitions present on this hard drive.
target: Klik "%s" jika Anda ingin menghapus semua data dan partisi yang ada 
    di harddisk ini. Awas, setelah mengklik "%s" Anda tak dapat 
    mengembalikan data dan partisi di drive ini termasuk data Mindows.
    
    Pilih "%s" utk membatalkan aksi ini tanpa kehilangan data dan partisi
    yang ada dalam harddisk ini.

en: Click on a device in the left tree in order to display its information here.
target: Klik device di pohon kiri utk menampilkan info-nya di sini.

en: Clients for different protocols including ssh
target: Klien untuk berbagai protokol, termasuk ssh

en: Close
target: Tutup

en: Cocos (Keeling) Islands
target: Kepulauan Cocos (Keeling)

en: Collapse Tree
target: Tutup Tree

en: Color configuration
target: Konfigurasi warna

en: Color depth: %s
target: Pilihan kedalaman warna: %s

en: Coma bug
target: Kutu Coma

en: Command line
target: Perintah baris

en: Compact
target: Kompak

en: Complete your security setup with this very easy-to-use software which combines high performance components such as a firewall, a virtual private network (VPN) server and client, an intrusion detection system and a traffic manager.
target: Software ini mengkombinasikan komponen firewall, server dan klien virtual private network (VPN), deteksi penyusupan dan manajer lalulintas.

en: Computing FAT filesystem bounds
target: Sedang menghitung bound filesystem FAT

en: Computing the size of the Windows partition
target: Hitung ukuran partisi Mindows

en: Configuration
target: Konfigurasi

en: Configuration Wizards
target: Dukun Konfigurasi

en: Configuration is complete, do you want to apply settings ?
target: Konfigurasi selesai, terapkan setting-nya?

en: Configuration of a remote printer
target: Konfigurasi printer remote

en: Configure
target: Konfigurasikan

en: Configure Internet Access...
target: Konfigurasi Akses Internet...

en: Configure Local Area Network...
target: Konfigurasi Local Area Network...

en: Configure X
target: Konfigurasi X

en: Configure all heads independently
target: Konfigurasikan semua head secara terpisah

en: Configure bootsplash picture
target: Konfigurasi gambar bootsplash

en: Configure module
target: Konfigurasi modul

en: Configure mouse
target: Konfigurasi mouse

en: Configure networking
target: Konfigurasi jaringan

en: Configure only card "%s"%s
target: Konfigurasikan hanya kartu "%s"%s

en: Configure services
target: Konfigurasi service

en: Configure the network now
target: Konfigurasikan jaringan sekarang

en: Configuring IDE
target: Konfigurasi IDE

en: Configuring PCMCIA cards...
target: Konfigurasikan card PCMCIA

en: Configuring applications...
target: Konfigurasi aplikasi...

en: Configuring network
target: Konfigureasi jaringan

en: Configuring network device %s
target: Konfigurasi perangkat jaringan %s

en: Configuring printer "%s"...
target: Konfigurasikan printer "%s"...

en: Configuring printer ...
target: Konfigurasi printer...

en: Configuring scripts, installing software, starting servers...
target: Mengkonfigurasikan skrip, menginstall software, menjalankan server...

en: Configuring...
target: Konfigurasi...

en: Congo (Brazzaville)
target: Kongo (Brazzaville)

en: Congratulations!
target: Selamat!

en: Congratulations, installation is complete.
    Remove the boot media and press return to reboot.
    
    
    For information on fixes which are available for this release of Mandrake Linux,
    consult the Errata available from:
    
    
    %s
    
    
    Information on configuring your system is available in the post
    install chapter of the Official Mandrake Linux User's Guide.
target: Selamat, instalasi selesai.
    Cabut media boot dan tekan Return/Enter untuk reboot.
    
    
    Untuk informasi perbaikan rilis Linux Mandrake ini,
    silakan lihat Errata di:
    
    
    %s
    
    
    Informasi untuk konfigurasi sistem juga tersedia di 
    bab Instalasi akhir di Buku Petunjuk Resmi Linux Mandrake.

en: Congratulations, the network and Internet configuration is finished.
target: Selamat, jaringan dan Internet telah dikonfigurasikan.

en: Connect %s
target: Sambung %s

en: Connect to the Internet
target: Hubungan ke Internet

en: Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
    
    Do you really want to continue setting up this printer as you are doing now?
target: Hubungkan printer Anda ke server Linux server dan membuat mesin Mindows terhubung sebagai klien.
    
    Anda ingin lanjutkan set up printer ini seperti yang Anda lakukan sekarang?

en: Connect...
target: Sambungkan...

en: Connected
target: Tersambung

en: Connecting to Internet
target: Penghubungan ke Internet

en: Connection Configuration
target: Konfigurasi Koneksi

en: Connection Time:
target: Waktu Koneksi:

en: Connection complete.
target: Koneksi rampung.

en: Connection failed.
    Verify your configuration in the Mandrake Control Center.
target: Koneksi gagal.
    Periksa konfigurasi Anda di Pusat Kontrol Mandrake.

en: Connection name
target: Nama koneksi

en: Connection speed
target: Laju koneksi

en: Connection timeout (in sec)
target: Timeout koneksi (detik)

en: Connection type:
target: Tipe koneksi

en: Console Tools
target: Alat konsol

en: Contacting Mandrake Linux web site to get the list of available mirrors...
target: Mandrake Linux sedang dihubungi untuk mengambil daftar mirror

en: Contacting the mirror to get the list of available packages...
target: Saya sedang mencek mirror untuk mengambil daftar paket yang tersedia

en: Content of the file
target: Isi file

en: Continue
target: Lanjut

en: Continue anyway?
target: Jalan terus?

en: Control and Shift keys simultaneously
target: Control dan Shift bersamaan

en: Cook Islands
target: Kepulauan Cook

en: Copy fonts on your system
target: Salin font di sistem Anda

en: Copying %s
target: Salin %s

en: Cote d'Ivoire
target: Pantai Gading

en: Couldn't access the floppy!
target: Gagal akses ke floppy!

en: Country / Region
target: Negara

en: Cpuid family
target: Keluarga cpuid

en: Cpuid level
target: Tingkat cpuid

en: Create
target: Buat

en: Create a bootdisk
target: Membuat bootdisk

en: Create a new partition
target: Membuat partisi baru

en: Create new theme
target: Buat tema baru

en: Creating and formatting file %s
target: Membuat dan memformat file %s

en: Creating auto install floppy
target: Disket auto install sedang dibuat

en: Creating auto install floppy...
target: Lagi buat disket auto install

en: Creating bootdisk...
target: Pembuatan bootdisk...

en: Croatia
target: Kroasia

en: Croatian
target: Kroasia

en: Cron not available yet as non-root
target: Cron non-root belum tersedia

en: Ctrl and Alt keys simultaneously
target: Ctrl dan Alt bersamaan

en: Cuba
target: Kuba

en: Current configuration of `%s':
    
    Network: %s
    IP address: %s
    IP attribution: %s
    Driver: %s
target: Konfigurasi `%s':
    
    Network: %s
    Alamat IP: %s
    Atribut IP: %s
    Driver: %s

en: Current interface configuration
target: Konfigurasi antarmuka kini

en: Current user
target: Pengguna saat ini

en: Currently, no alternative possibility is available
target: Saat ini tidak ada kemungkinan lain

en: Custom Restore
target: Restorasi pilihan sendiri

en: Custom configuration
target: Konfigurasi pribadi

en: Custom disk partitioning
target: Lakukan partisi disk secara custom

en: Custom settings
target: Setting kebiasaan

en: Cylinder %d to %d
target: Silinder %d sampai %d

en: Cyprus
target: Kipros

en: Czech (QWERTY)
target: Ceko (QWERTY)

en: Czech (QWERTZ)
target: Ceko (QWERTZ)

en: Czech Republic
target: Republik Ceko

en: DHCP Client
target: Klien DHCP

en: DHCP Server Configuration.
    
    Here you can select different options for the DHCP server configuration.
    If you don't know the meaning of an option, simply leave it as it is.
target: Konfigurasi Server DHCP
    
    Di sini Anda dapat memilih opsi konfigurasi server DHCP.
    Jika Anda tak tahu arti opsi, tinggalkan apa adanya.

en: DHCP client
target: Klien DHCP

en: DHCP host name
target: Nama Host DHCP

en: DNS server
target: Server DNS

en: DNS server address should be in format 1.2.3.4
target: Alamat server DNS harus dalam format 1.2.3.4

en: DOS drive letter: %s (just a guess)
target: DOS letter: %s (hanya tebakan)

en: DVD-R device
target: device DVDR

en: Daily security check
target: Cek keamanan harian

en: Danish
target: Denmark

en: Database Server
target: Server Database

en: December
target: Desember

en: Default desktop
target: Desktop standar

en: Default printer
target: Printer standar

en: Default user
target: Pengguna standar

en: Del profile...
target: Hapus profil...

en: Delay before booting default image
target: Delay sebelum boot ke image default

en: Delete
target: Hapus

en: Delete All NBIs
target: Hapus Semua NBI

en: Delete Client
target: Hapus Klien

en: Delete Hard Drive tar files after backup to other media.
target: Hapus file tar Harddisk setelah backup ke media lain.

en: Delete profile
target: Hapus profil

en: Delete selected rule
target: Hapus aturan terpilih

en: Description
target: Keterangan

en: Description of the fields:
target: Penjelasan isian:

en: Detailed information
target: Info detil

en: Details
target: Detil

en: Detected %s
target: Terdeteksi %s

en: Detected hardware
target: Hardware terdeteksi

en: Detected model: %s
target: Model terdeteksi: %s

en: Detected model: %s %s
target: Terdeteksi model: %s %s

en: Detecting devices...
target: Deteksi device...

en: Detection in progress
target: Pendeteksian sedang berjalan

en: Development
target: Pengembangan

en: Dialing mode
target: mode dial

en: Dialup options
target: Parameter Dialup

en: Did it work properly?
target: Bekerja dg baik?

en: Direct root login
target: Login root langsung

en: Directory %s already contains data
    (%s)
target: Direktori %s telah berisi data
    (%s)

en: Disable Local Config
target: Non-aktifkan Konfigurasi Lokal

en: Disable Server
target: Pasifkan Server

en: Disabling servers...
target: Server-server sedang dimatikan

en: Disconnect %s
target: Putus %s

en: Disconnect...
target: Koneksi diputus

en: Disconnecting from Internet
target: Pemutusan hubungan dari Internet

en: Disconnection from Internet failed.
target: Pemutusan hubungan dari Internet gagal.

en: Display all available remote CUPS printers
target: Tampilkan semua printer CUPS remote

en: Display logo on Console
target: Display logo di Konsol

en: Display theme
    under console
target: Display tema
    di konsol

en: Djibouti
target: Jibouti

en: Do
target: Laksanakan

en: Do it!
target: Kerjakan!

en: Do new backup before restore (only for incremental backups.)
target: Lakukan backup baru sebelum restorasi (hanya utk backup incremental.)

en: Do not allow execution of any binaries on the mounted
    file system. This option might be useful for a server that has file systems
    containing binaries for architectures other than its own.
target: Jangan izinkan eksekusi biner di sistem file ter-mount. Opsi ini berguna
    bagi server yg punya sistem file berisi biner utk arsitektur berbeda.

en: Do not allow set-user-identifier or set-group-identifier
    bits to take effect. (This seems safe, but is in fact rather unsafe if you
    have suidperl(1) installed.)
target: Tidak memberlakukan bit set-user-identifier atau set-group-identifier.
    (Tampaknya aman, tapi sebenarnya lebih berbahaya jika Anda telah menginstal
    suidperl(1).)

en: Do not include critical files (passwd, group, fstab)
target: Tidak memasukkan file penting (passwd, group, fstab)

en: Do not include the browser cache
target: Jangan masukkan cache browser

en: Do not interpret character or block special devices on the file system.
target: Jangan ubah device khusus blok atau karakter di sistem file.

en: Do not print any test page
target: Jangan cetak halaman tes

en: Do not send mails when unneeded
target: Jangan kirim mail jika tak perlu

en: Do not transfer printers
target: Jangan transfer printer

en: Do not update inode access times on this file system
    (e.g, for faster access on the news spool to speed up news servers).
target: Jangan update waktu akses inode di sistem file ini
    (mis: utk akses lebih cepat di spool berita utk mempercepat server berita).

en: Do nothing
target: Tak lakukan apa-apa

en: Do you have an ISA sound card?
target: Anda punya kartu suara ISA?

en: Do you have another one?
target: Anda punya lagi?

en: Do you have any %s interfaces?
target: Punya antarmuka %s?

en: Do you really want to remove the printer "%s"?
target: Anda ingin menghapus printer "%s"?

en: Do you want the BackSpace to return Delete in console?
target: Ingin membuat tombol BackSpace menjadi Delete dalam konsol?

en: Do you want to click on this button?
target: Anda ingin meng-klik tombol ini?

en: Do you want to enable printing on printers in the local network?
target: Anda ingin mengaktifkan pencetakan di printer jaringan lokal?

en: Do you want to enable printing on the printers mentioned above or on printers in the local network?
target: Anda ingin mengaktifkan pencetakan di printer tersebut di atas atau printer di jaringan lokal?

en: Do you want to enable printing on the printers mentioned above?
target: Anda ingin mengaktifkan pencetakan di printer tersebut di atas?

en: Do you want to save /etc/fstab modifications
target: Ingin simpan modifikasi /etc/fstab

en: Do you want to set this printer ("%s")
    as the default printer?
target: Ingin menset printer ini ("%s")
    sbg printer standar?

en: Do you want to start a new configuration ?
target: Ingin jalankan konfigurasi baru?

en: Do you want to start the connection at boot?
target: Anda mau jalankan koneksi ini saat boot?

en: Do you want to test the configuration?
target: Anda ingin tes konfigurasi ini?

en: Do you want to try to connect to the Internet now?
target: Anda ingin tes koneksi Internet sekarang?

en: Do you want to use aboot?
target: Ingin pakai aboot?

en: Do you want to use this feature?
target: Ingin pakai fitur ini?

en: Documentation
target: Dokumentasi

en: Does not appear to be recordable media!
target: Tampaknya bukan media yang dapat merekam!

en: Domain Admin Password
target: Katasandi Admin Domain

en: Domain Admin User Name
target: Nama Pengguna Admin Domain

en: Domain Authentication Required
target: Otentikasi Domain Dibutuhkan

en: Domain Name Resolver
target: Perumus Nama Domain

en: Domain Name Server
target: Server Nama Domain

en: Domain Name and Network Information Server
target: Nama Domain dan Server Info Network (NIS)

en: Domain Name:
target: Nama domain:

en: Domain name
target: Nama domain

en: Dominica
target: Dominika

en: Dominican Republic
target: Republik Dominika

en: Don't rewind tape after backup
target: Jangan putar balik pita setelah backup

en: Done
target: Selesai

en: Down
target: Turun

en: DrakSec Basic Options
target: Opsi Dasar DrakSec

en: Drakbackup Configuration
target: Konfigurasi Drakbackup

en: Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.
    You can also edit your own rules which will owerwrite the default rules.
target: Drakperm digunakan utk melihat file yg digunakan utk membetulkan izin, pemilik, dan grup via msec.
    Anda dapat juga mengedit aturan Anda sendiri yang akan menindas aturan standar.

en: Drive capacity
target: Kapasitas drive

en: Duplicate mount point %s
target: Lokasi mount %s ada dua

en: Dutch
target: Belanda

en: Dvorak (Norwegian)
target: Dvorak (Norwegia)

en: Dvorak (Swedish)
target: Dvorak (Swedia)

en: Dynamic IP Address Pool:
target: Pool Alamat IP Dinamik

en: EIDE/SCSI channel
target: Kanal EIDE/SCSI

en: ERROR: Cannot spawn %s.
target: ERROR: Tak dapat menghasilkan %s.

en: Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)
target: Chip Pentium Intel awal punya kutu di prosesor titik ambangnya shg saat melakukan pembagian titik ambang (FDIV) ia takkan mencapai presisi yg dibutuhkan

en: East Europe
target: Eropa Timur

en: East Timor
target: Nusantara

en: Ecuador
target: Ekuador

en: Edit current rule
target: Edit aturan saat ini

en: Edit selected host
target: Edit host terpilih

en: Edit selected host/network
target: Edit host/jaringan terpilih

en: Edit selected server
target: Edit server yg dipilih

en: Editors, shells, file tools, terminals
target: Editor, shell, tool untuk file, terminal

en: Egypt
target: Mesir

en: Either the server name or the server's IP must be given!
target: Harus ada nama/IP server!

en: Eject tape after the backup
target: Eject pita setelah backup

en: Empty
target: Kosong

en: Empty label not allowed
target: Label tak boleh kosong

en: Emulate third button?
target: Emulasikan tombol ketiga?

en: Enable "%s" to execute the file
target: Izinkan "%s" utk eksekusi file

en: Enable "%s" to read the file
target: Izinkan "%s" membaca file

en: Enable "%s" to write the file
target: Izinkan "%s" utk menulis file

en: Enable "crontab" and "at" for users
target: Aktifkan "crontab" dan "at" utk pengguna

en: Enable ACPI
target: Aktifkan ACPI

en: Enable CD Boot?
target: Aktifkan boot dari CD?

en: Enable OF Boot?
target: Aktifkan boot dari OF?

en: Enable Server
target: Aktifkan Server

en: Enable libsafe if libsafe is found on the system
target: Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem

en: Enable msec hourly security check
target: Aktifkan cek keamanan perjam oleh msec

en: Enable multiple profiles
target: Aktifkan profil majemuk

en: Enable su only from the wheel group members or for any user
target: Izinkan su hanya bagi anggota grup wheel atau izinkan semua pengguna

en: Enable the logging of IPv4 strange packets
target: Aktifkan pencatatan paket aneh IPv4

en: Enable/Disable IP spoofing protection.
target: Aktifkan/Matikan proteksi pemalsuan IP.

en: Enable/Disable libsafe if libsafe is found on the system.
target: Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem

en: Enable/Disable msec hourly security check.
target: Aktifkan/Matikan cek keamanan tiap jam oleh msec.

en: Enable/Disable name resolution spoofing protection.  If
    "alert" is true, also reports to syslog.
target: Aktifkan/Matikan proteksi pemalsuan resolusi nama.
    Jika "alert" = true, juga lapor ke syslog.

en: Enable/Disable syslog reports to console 12
target: Aktifkan/Matikan laporan syslog ke konsol 12

en: Enable/Disable the logging of IPv4 strange packets.
target: Aktifkan/Matikan pencatatan paket aneh IPv4.

en: Enabling servers...
target: Server-server akan dinyalakan

en: Enabling swap partition %s
target: Aktifkan partisi swap %s

en: Encryption key
target: Kunci sandi

en: Encryption key (again)
target: Kunci sandi (lagi)

en: Encryption key for %s
target: Kunci sandi utk %s

en: Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux
target: Maksimalkan kemampuan komputer Anda dg pertolongan partner profesional

en: Enter IP address and port of the host whose printers you want to use.
target: Masukkan alamat IP dan port host yg ingin Anda pakai printernya.

en: Enter Printer Name and Comments
target: Masukkan Nama Printer dan Komentar

en: Enter a printer device URI
target: Masukkan URI device printer

en: Enter a user
    %s
target: Masukkan pengguna
    %s

en: Enter the directory to save to:
target: Masukkan direktori utk penyimpanan:

en: Enter the directory to save:
target: Direktori penyimpanan:

en: Enter your CD Writer device name
     ex: 0,1,0
target: Masukkan nama device Penulis CD Anda
     mis: 0,1,0

en: Entering step `%s'
target: Memulai langkah `%s'

en: Entries you'll have to fill:
    %s
target: Entri yang harus Anda penuhi:
    %s

en: Equatorial Guinea
target: Guinea Equator

en: Erase entire disk
target: Hapus seluruh disk

en: Erase tape before backup
target: Hapus pita sebelum backup

en: Erase your RW media (1st Session)
target: Hapus media RW (sesi pertama)

en: Error
target: Ada Kesalahan

en: Error during sending file via FTP.
     Please correct your FTP configuration.
target: Error saat pengiriman file via FTP.
     Betulkan konfigurasi FTP Anda.

en: Error during sendmail.
      Your report mail was not sent.
      Please configure sendmail
target: Error saat sendmail.
      Surat laporan Anda tak terkirim.
      Mohon konfigurasikan sendmail

en: Error installing aboot, 
    try to force installation even if that destroys the first partition?
target: Ada error saat install aboot,
    paksakan instalasi walau merusak partisi awal?

en: Error opening %s for writing: %s
target: error membuka file %s untuk ditulisi: %s

en: Error reading file %s
target: Error saat membaca file %s

en: Error writing to file %s
target: Error pada saat menulis file %s

en: Error!
target: Ada Kesalahan

en: Error: The "%s" driver for your sound card is unlisted
target: Error: driver "%s" utk kartu suara Anda tak terdaftar

en: Espanol
target: Spanyol

en: Estimating
target: Perkiraan

en: Estonian
target: Estonia

en: Etherboot Floppy/ISO
target: Floppy Etherboot/ISO

en: Etherboot ISO image is %s
target: Image ISO Etherboot adalah %s

en: Ethernet Card
target: Kartu Ethernet

en: Ethernet cards promiscuity check
target: Cek kekacauan kartu ethernet

en: Ethernetcard
target: Kartu Ethernet

en: European protocol
target: Protokol Eropa

en: European protocol (EDSS1)
target: Protokol Eropa (EDSS1)

en: Every printer needs a name (for example "printer"). The Description and Location fields do not need to be filled in. They are comments for the users.
target: Tiap printer perlu nama (misalnya "printer"). Kolom Penjelasan / Lokasi tak harus terisi. Itu komentar utk pengguna.

en: Everything (no firewall)
target: Semua (tanpa firewall)

en: Everything has been configured.
    You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP).
target: Semuanya sudah dikonfigurasikan.
    Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi jaringan otomatis (DHCP).

en: Examples for correct IPs:
target: Contoh IP yg benar:

en: Execute
target: Eksekusi

en: Exit
target: Keluar

en: Exit install
target: Keluar dari proses instalasi

en: Expand Tree
target: Buka Tree

en: Expect is an extension to the Tcl scripting language that allows interactive sessions without user intervention.
target: Expect adalah kepanjangan bahasa skrip Tcl yg memungkinkan sesi interaktif tanpa intervensi pengguna.

en: Expert Mode
target: Mode Ahli

en: Extended partition not supported on this platform
target: Partisi extended tak bisa dipakai di platform ini

en: External ISDN modem
target: Modem ISDN external

en: F00f bug
target: Kutu F00F

en: FAT resizing failed: %s
target: Resize FAT gagal: %s

en: FTP proxy
target: Proxy FTP

en: Failed to add the printer "%s" to Star Office/OpenOffice.org/GIMP.
target: Gagal menambahkan printer "%s" ke Star Office/OpenOffice.org/GIMP.

en: Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)
target: Gagal mencek sistem file %s. Ingin direparasi? (awas, data Anda bisa hilang)

en: Failed to configure printer "%s"!
target: Konfigurasi printer "%s" gagal!

en: Failed to remove the printer "%s" from Star Office/OpenOffice.org/GIMP.
target: Gagal menghapus printer "%s" dari Star Office/OpenOffice.org/GIMP.

en: Falkland Islands (Malvinas)
target: Kepulauan Malvinas

en: Faroe Islands
target: Kepulauan Faroe

en: Fdiv bug
target: Kutu FDIV

en: February
target: Pebruari

en: File Selection
target: Pilihan File

en: File already exists. Use it?
target: File sudah ada. Gunakan file ini ?

en: File is already used by another loopback, choose another one
target: File sudah digunakan oleh loopback lain, pilih yang lainnya

en: File sharing
target: Pemakaian file bersama

en: Files Restored...
target: File Telah Direstorasi...

en: Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up.
target: File atau wildcard yg terdaftar dalam file .backupignore pada puncak pohon direktori takkan di-backup.

en: Filesystem encryption key
target: Kunci sandi sistem file

en: Filesystem type:
target: Tipe filesystem:

en: Filesystem types:
target: Tipe filesystem:

en: Find the solutions of your problems via MandrakeSoft's online support platform.
target: Temukan solusi problem via platform dukungan online MandrakeSoft

en: Finding packages to upgrade...
target: Sedang mencari paket untuk diupgrade

en: Finish
target: Selesai

en: Finland
target: Finlandia

en: Finnish
target: Finland

en: Firewall/Router
target: Server, Firewall/Router

en: Firewalling configuration detected!
target: Konfigurasi firewall terdeteksi!

en: Firewire controllers
target: Pengontrol Firewire

en: Firmware-Upload for HP LaserJet 1000
target: Firmware-Upload utk HP LaserJet 1000

en: First DNS Server (optional)
target: Server DNS Primer (boleh diisi/tidak)

en: First Time Wizard
target: Penolong Kali Pertama

en: First floppy drive
target: Drive disket Pertama

en: First sector of boot partition
target: Sektor pertama di partisi boot

en: First sector of drive (MBR)
target: Sektor pertama di drive (MBR)

en: First sector of the root partition
target: Sektor pertama di partisi root

en: Flags
target: Flag

en: Floppy
target: Disket

en: Floppy can be removed now
target: Disket dapat dilepas sekarang

en: Floppy format
target: Format disket

en: Font Importation and monitoring application                                     
    --windows_import : import from all available windows partitions.
    --xls_fonts      : show all fonts that already exist from xls
    --strong         : strong verification of font.
    --install        : accept any font file and any directry.
    --uninstall      : uninstall any font or any directory of font.
    --replace        : replace all font if already exist
    --application    : 0 none application.
                     : 1 all application available supported.
                     : name_of_application like  so for staroffice 
                     : and gs for ghostscript for only this one.
target: Impor Font dan aplikasi pemantauan
    --windows_import : impor dari seluruh partisi mindows yg ada.
    --xls_fonts      : tampilkan semua font yg telah ada dari xls
    --strong         : font akan dicek secara ketat.
    --install        : terima file dan direktori font.
    --uninstall      : hapus font atau direktori font.
    --replace        : tindih semua font jika telah ada
    --application    : 0 tanpa aplikasi.
                     : 1 semua aplikasi yg ada di-support.
                     : name_of_application semisal so utk staroffice 
                     : dan gs utk ghostscript.

en: Font List
target: Daftaf Font

en: Fonts copy
target: Copy font

en: For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup.
target: Pada CD multisesi, hanya sesi pertama yg akan menghapus cdrw. Lainnya, cdrw dihapus sebelum tiap backup.

en: For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup.
target: Utk backup ke media lain, file tetap dibuat di harddisk, lalu dipindah ke media lain. Pengaktifan opsi ini akan menghapus file tar di harddisk setelah backup.

en: For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
    If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed.
target: Pada kartu TV modern umumnya, modul bttv kernel GNU/Linux otomatis mendeteksi parameter yg benar.
    Jika kartu Anda tak terdeteksi, pilihlah tuner dan tipe kartu di sini. Pilih parameter kartu tv Anda jika perlu

en: For security reasons, it will be disconnected now.
target: Untuk alasan keamanan, koneksi akan diputus sekarang.

en: For this to work for a W2K PDC, you will probably need to have the admin run: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone /add and reboot the server.
    You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
    If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
    Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
    The command 'wbinfo -t' will test whether your authentication secrets are good.
target: Agar dapat bekerja dg PDC W2K, Anda mungkin perlu minta tolong admin menjalankan: C:\>net localgroup "Pre-Windows 2000 Compatible Access" everyone / add dan me-reboot server.
    Anda mungkin juga perlu namapengguna/katasandi Admin Domain utk mengikutkan mesin ke domain Mindows(TM).
    Jika jaringan belum aktif, Drakx akan mencoba ikut domain setelah tahapan setup jaringan.
    Jika setup dan otentikasi domain gagal, jalankan 'smbpasswd -j DOMAIN -U USER%%PASSWORD' menggunakan Domain Mindows(tm) Anda, dan Namapengguna/Katasandi Admin, setelah boot system.
    Perintah 'wbinfo -t' akan mengetes apakah rahasia otentikasi Anda baik.

en: Force No APIC
target: Tanpa ACPI

en: Format partitions
target: Melakukan format partisi

en: Formatted
target: Telah diformat

en: Formatting partition %s
target: Melakukan format partisi %s

en: Found "%s" interface do you want to use it ?
target: Ditemukan antarmuka "%s" Anda ingin menggunakannya?

en: Found %s %s interfaces
target: Ditemukan interface %s %s

en: France
target: Perancis

en: France [SECAM]
target: Perancis [SECAM]

en: French
target: Perancis

en: French Guiana
target: Guiana Perancis

en: French Polynesia
target: Polinesia Perancis

en: French Southern Territories
target: Perancis, Teritori Selatan

en: Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough '0' (zeroes).
target: Freq harus berakhiran k, M atau G (mis. "2.46G" utk frekuensi 2.46 GHz), atau tambahkan '0' (nol) secukupnya.

en: Frequency (MHz)
target: Frekuensi (MHz)

en: Friday
target: Jumat

en: Ftp Server
target: Server FTP

en: GPM adds mouse support to text-based Linux applications such the
    Midnight Commander. It also allows mouse-based console cut-and-paste operations,
    and includes support for pop-up menus on the console.
target: GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam
    Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada konsol
    dan juga bikin menu pop-up di konsol.

en: Game station
target: Komputer Game

en: Gateway (e.g. %s)
target: Gateway (mis. %s)

en: Gateway address should be in format 1.2.3.4
target: Alamat gateway harus dalam format 1.2.3.4

en: Gateway device
target: Device gateway

en: General
target: Umum

en: Generate auto install floppy
target: Buat floppy instalasi otomatis

en: Generating preview ...
target: Prapandang sedang dibuat ...

en: Generic
target: Generik

en: Generic 2 Button Mouse
target: Mouse Generik 2 Tombol

en: Generic 3 Button Mouse
target: Mouse Generik 3 Tombol

en: Generic PS2 Wheel Mouse
target: Mouse PS2 wheel generik

en: Generic Printers
target: Printer Generik

en: Geometry: %s cylinders, %s heads, %s sectors
target: Ukuran: %s silinder, %s head, %s sektor

en: Georgia
target: Grujia

en: Georgian ("Latin" layout)
target: Georgia (layout "Latin")

en: Georgian ("Russian" layout)
target: Georgia (layout "Rusia")

en: German
target: Jerman

en: German (no dead keys)
target: Jerman (tanpa dead key)

en: Germany
target: Jerman

en: Get Windows Fonts
target: Ambil Font Windows

en: Get the best items with Mandrake Linux Strategic partners
target: Dapatkan item terbaik dg partner strategis Linux Mandrake

en: Ghostscript referencing
target: referensi Ghostscript

en: Gibraltar
target: Jibraltar

en: Give a file name
target: Berikan nama file

en: Give the ram size in MB
target: Berikan jumlah RAM dalam satuan MB

en: Gnome Workstation
target: Stasiunkerja Gnome

en: Go on anyway?
target: Jalan terus?

en: Go on without configuring the network
target: Jalan tanpa konfigurasi jaringan

en: Graphic Card
target: Kartu Grafik

en: Graphic Card
    
       The installer will normally automatically detect and configure the
    graphic card installed on your machine. If it is not the case, you can
    choose from this list the card you actually have installed.
    
       In the case that different servers are available for your card, with or
    without 3D acceleration, you are then asked to choose the server that best
    suits your needs.
target: Kartu Grafik
    
       Instalator dapat secara otomatis mendeteksi dan mengkonfigurasikan
    kartu grafik mesin Anda. Jika gagal, pilih kartu yg sesuai di daftar ini.
    
       Jika tersedia beberapa server utk kartu Anda, dengan/tanpa akselerasi
    3D, Anda akan ditanyai mana yg tercocok dg kebutuhan Anda.

en: Graphical Environment
target: Mode Grafis

en: Graphical Interface
target: Antarmuka Grafis

en: Graphical interface
target: Antarmuka grafis

en: Graphical interface at startup
target: Antarmuka grafis saat startup

en: Graphics card: %s
target: Kartu grafis: %s

en: Graphics card: %s
target: Kartu grafis: %s

en: Graphics memory: %s kB
target: Memori grafis: %s KB

en: Greece
target: Yunani

en: Greek
target: Yunani

en: Greek (polytonic)
target: Yunani (politonik)

en: Group
target: Grup

en: Gujarati
target: Gujarat

en: Gurmukhi
target: Gurmukh

en: HTTP proxy
target: Proxy HTTP

en: Halt bug
target: Kutu halt

en: Hard Disk Backup Progress...
target: Kemajuan Backup Hard Disk...

en: Hard Disk Backup files...
target: File Backup Hard Disk...

en: Hard drive detection
target: Deteksi hard disk

en: Hard drive information
target: Info hard drive

en: HardDrake runs a hardware probe, and optionally configures
    new/changed hardware.
target: HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila perlu.

en: Harddrake help
target: Pertolongan Harddrake

en: Harddrake2 version %s
target: Harddrake2 versi %s

en: Hardware
target: Piranti Keras

en: Hardware clock set to GMT
target: Jam hardware diset ke GMT

en: Hardware probing in progress
target: Penyalaan perangkat keras sedang berjalan

en: Have a nice day!
target: Daagh!

en: Heard and McDonald Islands
target: Kepulauan Heard dan McDonald

en: Help
target: Pertolongan

en: Here are the entries on your boot menu so far.
    You can create additional entries or change the existing ones.
target: Ini adalah entri yang lain lagi.
    Anda boleh tambahkan atau mengubah yang sudah ada.

en: Here is a list of all auto-detected printers.
target: Berikut adalah daftar printer yg terdeteksi otomatis

en: Here is a list of the available printing options for the current printer:
target: Daftar opsi cetak tersedia untuk printer ini:

en: Here is the full list of available countries
target: Ini adalah daftar negara yang tersedia

en: Here is the full list of keyboards available
target: Ini adalah daftar papanketik yang tersedia

en: Here you can choose the key or key combination that will 
    allow switching between the different keyboard layouts
    (eg: latin and non latin)
target: Di sini Anda dapat memilih kunci atau kombinasinya untuk 
    berganti layout papanketik (mis: latin dan non latin)

en: Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines.
target: Di sini Anda dapat memilih apakah printer yg terhubung dg mesin ini bisa diakses oleh mesin remote dan oleh mesin remote mana.

en: Here you can choose whether the scanners connected to this machine should be accessable by remote machines and by which remote machines.
target: Anda dapat memutuskan di sini apakah scanner yg terhubung di mesin ini dapat diakses oleh mesin lain dan oleh mesin mana.

en: Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).
target: Di sini dapat dipilih driver alternatif (OSS atau ALSA) utk kartu suara Anda (%s)

en: Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer.
target: Anda dapat menentukan perintah sebarang tempat job di-pipe-kan sbg ganti pengiriman langsung ke printer.

en: Hide files
target: Sembunyikan file

en: High
target: Kuat

en: Higher
target: Lebih Kuat

en: Horizontal refresh rate
target: Laju refresh horisontal

en: Host Name
target: Nama Host

en: Host Path or Module
target: Path atau Modul Host

en: Host name
target: Nama Host

en: Host/network IP address missing.
target: Alamat IP host/jaringan hilang.

en: Hostname required
target: Nama Host dibutuhkan

en: Hostname:
target: Nama Host:

en: How is the printer connected?
target: Bagaimana printer ini disambung ke komputer?

en: Hungarian
target: Hungaria

en: Hungary
target: Hungaria

en: I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
    
    The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.
    		      
    Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.
target: Konfigurasi dapat tetap dipakai dengan anggapan Anda telah menset up server DHCP; tolong periksa apakah jaringan lokal Anda terbaca dengan benar; Konfigurasi ulang takkan dilakukan dan konfigurasi server DHCP takkan disentuh.
    
    Entri DNS standar adalah Caching Nameserver terkonfigurasi di tembok api. Anda dapat menggantinya dg IP DNS ISP, misalnya.
    
    Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).

en: I can set up your computer to automatically log on one user.
target: Komputer Anda dapat diset agar secara otomatis login dg satu pengguna.

en: I can setup your computer to automatically start the graphical interface (XFree) upon booting.
    Would you like XFree to start when you reboot?
target: Komputer Anda bisa diset agar menjalankan X saat booting.
    Anda mau fasilitas ini?

en: I can't add any more partition
target: Partisi tak dapat ditambah

en: I can't find any room for installing
target: Tiada ruang untuk instalasi

en: I can't find needed image file `%s'.
target: File image `%s' tak ditemukan.

en: I can't read the partition table of device %s, it's too corrupted for me :(
    I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
    The other solution is to not allow DrakX to modify the partition table.
    (the error is %s)
    
    Do you agree to lose all the partitions?
target: Tabel partisi %s rusak tak terbaca :(
    Partisi buruk dapat dicoba dihapus (SEMUA DATA AKAN HILANG!).
    Solusi lainnya adalah melarang DrakX memodifikasi tabel partisi.
    (pesan errornya adalah %s)
    
    Anda setuju untuk menghapus semua partisi?

en: I don't know
target: Saya tak tahu

en: I don't know how to format %s in type %s
target: tidak bisa melakukan format %s dengan tipe %s

en: I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.
target: Saya mendeteksi adanya sebuah card ISDN PCI, tapi saya tidak tahu tipenya. Silakan pilih card PCI tersebut pada layar berikutnya.

en: IP Range End:
target: Akhir Kisaran IP:

en: IP Range Start:
target: Awal Kisaran IP:

en: IP address
target: Alamat IP

en: IP address of host/network:
target: Alamat IP host/jaringan:

en: IP address should be in format 1.2.3.4
target: Alamat IP harus dalam format 1.2.3.4

en: ISDN Configuration
target: Konfigurasi ISDN

en: ISDN card
target: Kartu ISDN

en: ISDN connection
target: Konfigurasi koneksi ISDN

en: Iceland
target: Islandia

en: Icelandic
target: Islandia

en: Icewm, Window Maker, Enlightenment, Fvwm, etc
target: Icewm, Window Maker, Enlightenment, Fvwm, dsb

en: Icon
target: Ikon

en: If SERVER_LEVEL (or SECURE_LEVEL if absent)
    is greater than 3 in /etc/security/msec/security.conf, creates the
    symlink /etc/security/msec/server to point to
    /etc/security/msec/server.<SERVER_LEVEL>.
    
    The /etc/security/msec/server is used by chkconfig --add to decide to
    add a service if it is present in the file during the installation of
    packages.
target: Jika SERVER_LEVEL (atau SECURE_LEVEL jika tidak ada) lebih besar daripada 3
    di /etc/security/msec/security.conf, buat symlink /etc/security/msec/server
    merujuk /etc/security/msec/server.<SERVER_LEVEL>. 
    
    /etc/security/msec/server dipakai oleh chkconfig --add utk menambahkan
    servis jika terdapat di file selama instalasi paket.

en: If it is not the one you want to configure, enter a device name/file name in the input line
target: Jika ini bukan yang ingin dikonfigurasikan, masukkan nama device/file di baris masukan

en: If no port is given, 631 will be taken as default.
target: Jika port tak diberikan, sbg standar akan dipakai 631.

en: If set, send the mail report to this email address else send it to root
target: Jika diset, kirim laporan ke alamat email ini, jika tidak, kirim ke root.

en: If you have all the CDs in the list below, click Ok.
    If you have none of those CDs, click Cancel.
    If only some CDs are missing, unselect them, then click Ok.
target: Kalau Anda punya semua CD pada daftar di bawah, tekan OK.
    Kalau tak punya sama sekali, click Cancel.
    Kalau cuma punya beberapa aja, pilih aja, trus klik Ok.

en: If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
    at the beginning of the disk
target: Jika Anda ingin pakai aboot, sisakan ruang (cukup 2048 sektor) di awal disk

en: If you really think that you know which driver is the right one for your card
    you can pick one in the above list.
    
    The current driver for your "%s" sound card is "%s"
target: Jika Anda tahu pasti driver yg cocok utk kartu Anda ambillah salah satu
    dari daftar di atas.
    
    Driver kartu suara "%s" Anda kini adalah "%s"

en: If your printer is not listed, choose a compatible (see printer manual) or a similar one.
target: Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau yang mirip.

en: Import Fonts
target: Impor Font

en: Importance:
target: Derajat kepentingan:

en: In addition, queues not created with this program or "foomatic-configure" cannot be transferred.
target: Antrian tak dibuat oleh program ini atau "foomatic-configure" tak dapat ditransfer.

en: In some cases, the %s driver needs to have extra information to work
    properly, although it normally works fine without them. Would you like to specify
    extra options for it or allow the driver to probe your machine for the
    information it needs? Occasionally, probing will hang a computer, but it should
    not cause any damage.
target: Kadangkala, driver %s butuh info tambahan agar dapat bekerja normal walau
    biasanya tak perlu. Inginkah Anda memberikan parameter tambahan tadi atau
    biarkan saja drivernya melakukan deteksi sendiri parameternya? Deteksi
    otomatis bisa membuat komputer hang), tapi tak merusak.

en: Incremental backups only save files that have changed or are new since the last backup.
target: Backup incremental hanya menyimpan file yg telah berubah atau yg baru semenjak backup terakhir.

en: Individual package selection
target: Pilih paket sendiri

en: Information
target: Info

en: Init Message
target: Pesan Init

en: Initial tests
target: Tes Awal

en: Insert a FAT formatted floppy in drive %s
target: Masukkan disket yang sudah diformat dengan tipe FAT di drive %s

en: Insert a blank floppy in drive %s
target: Masukkan disket kosong di drive %s

en: Insert a floppy containing package selection
target: Masukkan disket yg berisi seleksi paket

en: Insert a floppy in %s
target: Masukkan disket ke %s

en: Insert a floppy in drive
    All data on this floppy will be lost
target: Masukkan disket ke drive
    semua data di disket ini akan hilang

en: Insert the CD with volume label %s
     in the CD drive under mount point /mnt/cdrom
target: Masukkan CD dengan label %s
     ke drive CD di titik mount /mnt/cdrom

en: Insert the tape with volume label %s
     in the tape drive device %s
target: Masukkan pita dengan label %s
     ke drive pita device %s

en: Install
target: Instal

en: Install & convert Fonts
target: Instal & konversikan Font

en: Install List
target: Daftar Instalasi

en: Install bootloader
target: Instal bootloader

en: Install rpm
target: Instal rpm

en: Install system
target: Instal sistem

en: Install themes
target: Instal tema

en: Install updates
target: Instal update

en: Install/Upgrade
target: Instal/Upgrade

en: Installation Server Configuration
target: Konfigurasi Server Instalasi

en: Installation image directory
target: Direktori image instalasi

en: Installation of %s failed. The following error occured:
target: Instalasi %s gagal. Ada kesalahan berikut:

en: Installation of bootloader failed. The following error occured:
target: Instalasi bootloader gagal. Ada kesalahan berikut:

en: Installing
target: Instalasi

en: Installing %s ...
target: Instalasi %s ...

en: Installing Foomatic...
target: Instalasi Foomatic ...

en: Installing HPOJ package...
target: Instalasi paket HPOJ...

en: Installing SANE packages...
target: Instalasi paket SANE...

en: Installing a printing system in the %s security level
target: Instalasi sistem cetak dalam level keamanan %s

en: Installing bootloader
target: Instalasi bootloader

en: Installing driver for %s card %s
target: Menginstal driver untuk kartu %s %s

en: Installing mtools packages...
target: Instalasi paket mtools...

en: Installing package %s
target: Instalasi paket %s

en: Installing package %s
    %d%%
target: Instalasi paket %s
    %d%%

en: Installing packages...
target: Instalasi paket...

en: Interface "%s"
target: Antarmuka "%s"

en: Interface %s
target: Antarmuka %s

en: Interface %s (on network %s)
target: Antarmuka %s (di jaringan %s)

en: Interface %s (using module %s)
target: Interface %s (pakai module %s)

en: Interface:
target: Antarmuka:

en: Internal ISDN card
target: Kartu ISDN internal

en: Internet Connection Configuration
target: konfigurasi koneksi Internet

en: Internet Connection Sharing
target: Pemakaian Bersama Koneksi Internet

en: Internet Connection Sharing configuration
target: Konfigurasi Sharing Koneksi Internet

en: Internet Connection Sharing currently disabled
target: Internet Connection Sharing masih dimatikan

en: Internet Connection Sharing currently enabled
target: Pemakaian Bersama Koneksi Internet telah aktif

en: Internet Connection Sharing is now disabled.
target: Internet Connection Sharing telah dimatikan

en: Internet Connection Sharing is now enabled.
target: Internet Connection Sharing sudah aktif

en: Internet access
target: Akses Internet

en: Internet configuration
target: Konfigurasi Internet

en: Internet connection
target: Koneksi Internet

en: Internet connection configuration
target: konfigurasi koneksi Internet

en: Internet gateway
target: Gerbang Internet

en: Internet station
target: Komputer Internet

en: Introduction
    
    The operating system and the different components available in the Mandrake Linux distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Mandrake Linux distribution.
    
    
    1. License Agreement
    
    Please read this document carefully. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Mandrake Linux" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.
target: Introduction
    
    The operating system and the different components available in the Linux-Mandrake distribution 
    shall be called the "Software Products" hereafter. The Software Products include, but are not 
    restricted to, the set of programs, methods, rules and documentation related to the operating 
    system and the different components of the Linux-Mandrake distribution.
    
    
    1. License Agreement
    
    Please read this document carefully. This document is a license agreement between you and  
    MandrakeSoft S.A. which applies to the Software Products.
    By installing, duplicating or using the Software Products in any manner, you explicitly 
    accept and fully agree to conform to the terms and conditions of this License. 
    If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
    the Software Products. 
    Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
    with the terms and conditions of this License is void and will terminate your rights under this 
    License. Upon termination of the License,  you must immediately destroy all copies of the 
    Software Products.
    
    
    2. Limited Warranty
    
    The Software Products and attached documentation are provided "as is", with no warranty, to the 
    extent permitted by law.
    MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
    incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
    business, interruption of business, financial loss, legal fees and penalties resulting from a court 
    judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
    Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such 
    damages.
    
    LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
    
    To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
    liable for any special, incidental, direct or indirect damages whatsoever (including without 
    limitation damages for loss of business, interruption of business, financial loss, legal fees 
    and penalties resulting from a court judgment, or any other consequential loss) arising out 
    of the possession and use of software components or arising out of  downloading software components 
    from one of Linux-Mandrake sites  which are prohibited or restricted in some countries by local laws.
    This limited liability applies to, but is not restricted to, the strong cryptography components 
    included in the Software Products.
    
    
    3. The GPL License and Related Licenses
    
    The Software Products consist of components created by different persons or entities.  Most 
    of these components are governed under the terms and conditions of the GNU General Public 
    Licence, hereafter called "GPL", or of similar licenses. Most of these licenses allow you to use, 
    duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
    and conditions of the license agreement for each component before using any component. Any question 
    on a component license should be addressed to the component author and not to MandrakeSoft.
    The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
    by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
    further details.
    
    
    4. Intellectual Property Rights
    
    All rights to the components of the Software Products belong to their respective authors and are 
    protected by intellectual property and copyright laws applicable to software programs.
    MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
    parts, by all means and for all purposes.
    "Mandrake", "Linux-Mandrake" and associated logos are trademarks of MandrakeSoft S.A.  
    
    
    5. Governing Laws 
    
    If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
    portion is excluded from this contract. You remain bound by the other applicable sections of the 
    agreement.
    The terms and conditions of this License are governed by the Laws of France.
    All disputes on the terms of this license will preferably be settled out of court. As a last 
    resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
    For any question on this document, please contact MandrakeSoft S.A.

en: Inuktitut
target: Eskimo

en: Invalid port given: %s.
    The proper format is "port/tcp" or "port/udp", 
    where port is between 1 and 65535.
target: Port tak berlaku: %s.
    Format yg benar adalah "port/tcp" atau "port/udp", 
    sedangkan port berkisar dari 1 sampai 65535.

en: Iranian
target: Iran

en: Ireland
target: Irlandia

en: Is FPU present
target: apakah ada FPU

en: Is this an install or an upgrade?
target: Ini instalasi atau update?

en: Is this correct?
target: Sudah sesuai?

en: Is this the correct setting?
target: Sudah benar?

en: Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?
target: Printer Anda alat multifungsi dari HP atau Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 dg scanner, DeskJet 450, Sony IJP-V100), HP PhotoSmart atau HP LaserJet 2200?

en: Israel
target: Palestina

en: Israeli
target: Ibrani

en: Israeli (Phonetic)
target: Ibrani (fonetik)

en: Italian
target: Itali

en: Italy
target: Itali

en: Jamaica
target: Jamaika

en: January
target: Januari

en: Japan
target: Jepang

en: Japan (broadcast)
target: Jepang (siaran)

en: Japan (cable)
target: Jepang (kabel)

en: Japanese 106 keys
target: Jepang 106 tombol

en: Japanese text printing mode
target: Mode cetak teks Jepang

en: Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:
target: Ikut online dengan tim support MandrakeSoft dan Komunitas Linux utk berbagi pengetahuan dan membantu sesama dengan menjadi Pakar di situs support teknik online:

en: Jordan
target: Jordania

en: Journalised FS
target: FS terjournal

en: July
target: Juli

en: June
target: Juni

en: KDE Workstation
target: Workstation KDE

en: Kannada
target: Kannada (India)

en: Keep the changes?
    The current configuration is:
    
    %s
target: Lakukan perubahan?
    Konfigurasi sekarang adalah:
    
    %s

en: Kernel Boot Timeout
target: Timeout Kernel Boot

en: Keyboard
target: Papanketik

en: Keyboard layout: %s
target: Layout papanketik: %s

en: Korea (North)
target: Korea (Utara)

en: Korean keyboard
target: Keyboard Korea

en: Kyrgyzstan
target: Kirgistan

en: LAN Configuration
target: konfigurasi LAN

en: LAN configuration
target: konfigurasi LAN

en: LAN connection
target: koneksi LAN

en: LDAP Base dn
target: Basis dn LDAP

en: LDAP Server
target: Server LDAP

en: LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally
    automated. DrakX will analyze the disk boot sector and act according to
    what it finds there:
    
     * if a Windows boot sector is found, it will replace it with a grub/LILO
    boot sector. This way you will be able to load either GNU/Linux or another
    OS.
    
     * if a grub or LILO boot sector is found, it will replace it with a new
    one.
    
    If it cannot make a determination, DrakX will ask you where to place the
    bootloader.
target: LILO dan grub adalah pemuat boot GNU/Linux. DrakX akan menganalisa sektor
    boot disk dan bekerja menurut apa yg ditemukannya di sana:
    
     * jika ditemukan sektor boot Mindows, ia akan menggantinya dg sektor boot
    grub/LILO. Dg demikian Anda akan dapat memuat GNU/Linux atau OS lain.
    
     * jika ditemukan sektor boot grub/LILO, ia akan menggantinya dg yg baru.
    
    Jika DrakX tak dapat mengambil keputusan, ia akan menanyakan tempat menaruh
    bootloader.

en: LILO with graphical menu
target: LILO dengan menu grafis

en: LILO with text menu
target: LILO dengan menu teks

en: LILO/grub Installation
target: Instalasi LILO/grub

en: LOCAL
target: LOKAL

en: LPD and LPRng do not support IPP printers.
target: LPD and LPRng tak men-support printer IPP.

en: LVM name?
target: nama LVM?

en: LVM-disks %s
target: Disk LVM %s

en: Language
target: Pilih bahasa

en: Laotian
target: Laos

en: Latin American
target: Amerika Latin

en: Latvian
target: Latvia

en: Launch packet filtering for Linux kernel 2.2 series, to set
    up a firewall to protect your machine from network attacks.
target: Luncurkan filter paket Linux kernel seri 2.2, untuk set-up
    firewall yang melindungi mesin Anda dari serangan network.

en: Launch the ALSA (Advanced Linux Sound Architecture) sound system
target: Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)

en: Launch the graphical environment when your system starts
target: Jalankan X-Window saat sistem dimulai

en: Launch the sound system on your machine
target: Aktifkan sistem suara

en: Launch the wizard
target: Luncurkan penolong

en: Launch userdrake
target: Luncurkan userdrake

en: Learn how to use this printer
target: Belajar cara pakai printer ini

en: Leaving in %d seconds
target: Keluar dalam %d detik

en: Left "Windows" key
target: Kunci "Mindows" kiri

en: Left Control key
target: Kunci Control kiri

en: Let me pick any driver
target: Akan kuambil sebarang driver

en: Lexmark inkjet configuration
target: Konfigurasi Lexmark inkjet

en: LiLo and Bootsplash themes installation successful
target: Instalasi tema LiLo dan Bootsplash sukses

en: License
target: Lisensi

en: License agreement
target: Persetujuan Lisensi

en: Lilo message not found
target: Pesan lilo tak ditemukan

en: Lilo screen
target: Layar lilo

en: Lilo/grub mode
target: mode Lilo/Grub

en: Linux Standard Base. Third party applications support
target: Basis Standar Linux. Tunjangan aplikasi partai ketiga

en: Linux Virtual Server, used to build a high-performance and highly
    available server.
target: Linux Virtual Server, digunakan utk membangun server dg performans dan
    kapasitas tinggi.

en: Linuxconf will sometimes arrange to perform various tasks
    at boot-time to maintain the system configuration.
target: Linuxconf kadang bekerja keras saat boot utk perawatan konfigurasi sistem.

en: List of data corrupted:
target: Daftar data rusak:

en: List of data to restore:
target: Daftar data restorasi:

en: Lithuanian "number row" QWERTY
target: Lithuania "number row" QWERTY

en: Lithuanian "phonetic" QWERTY
target: Lithuania "fonetik" QWERTY

en: Lithuanian AZERTY (new)
target: Lithuania AZERTY (baru)

en: Lithuanian AZERTY (old)
target: Lithuania AZERTY (lama)

en: Load from floppy
target: Muat dari floppy

en: Load the drivers for your usb devices.
target: Muat driver piranti USB

en: Load/Save on floppy
target: Muat/Simpan di floppy

en: Loading from floppy
target: Memuat dari floppy

en: Loading module %s failed.
    Do you want to try again with other parameters?
target: Module %s gagal diload.
    Mau coba lagi dengan parameter yang lain?

en: Local Network adress
target: Alamat Jaringan Lokal

en: Local Printer
target: Printer Lokal

en: Local Printers
target: Printer Lokal

en: Local files
target: File lokal

en: Local measure
target: Ukuran lokal

en: Local network(s)
target: Jaringan lokal

en: Local printer
target: Printer lokal

en: Location
target: Lokasi

en: Location of auto_install.cfg file
target: Lokasi file auto_install.cfg

en: Location on the bus
target: Lokasi di bus

en: Logical volume name
target: Nama volume lojik

en: Login name
target: Nama login

en: Logs
target: Log

en: Looking at packages already installed...
target: Paket terinstal sedang dicari...

en: Looking for available packages and rebuilding rpm database...
target: Sedang mencari paket yg tersedia dan membangun ulang database rpm...

en: Looking for available packages...
target: Sedang mencari paket yang tersedia...

en: Loopback file name:
target: Nama file loopback:

en: Loopback file name: %s
target: Nama file loopback: %s

en: Loopback file(s):
       %s
target: File loopback:
       %s

en: MOVE YOUR WHEEL!
target: GERAKKAN RODANYA!

en: Macedonian
target: Macedonia

en: Madagascar
target: Madagaskar

en: Mail Server
target: Server Mail

en: Mail alert
target: Pemberitahuan Mail

en: Mail alert configuration
target: Konfigurasi peringatan Mail

en: Make kernel message quiet by default
target: Matikan pesan kernel

en: Making printer port available for CUPS...
target: Sediakan port printer utk CUPS...

en: Maldives
target: Maladewa

en: Maltese (UK)
target: Malta (Inggris)

en: Maltese (US)
target: Malta (Amerika)

en: Mandatory package %s is missing
target: Paket wajib %s hilang

en: Mandrake Bug Report Tool
target: Pelapor Kutu Mandrake

en: Mandrake Control Center
target: Pusat Kontrol Mandrake

en: Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful tool to fully adapt your computer to the use you make of it. Configure and customize elements such as the security level, the peripherals (screen, mouse, keyboard...), the Internet connection and much more!
target: Mandrake Linux 9.2 menyajikan Pusat Kontrol Mandrake, konfigurator ampuh komputer Anda. Anda dapat mengatur tingkat keamanan, perangkat (layar, mouse, papanketik...), koneksi Internet dll!

en: Mandrake Linux 9.2: the ultimate development platform
target: Mandrake Linux adalah platform bangun terampuh

en: Mandrake Linux Installation %s
target: Instalasi Linux Mandrake %s

en: Mandrake Linux can support multiple languages. Select
    the languages you would like to install. They will be available
    when your installation is complete and you restart your system.
target: Anda dapat memilih bahasa lain yang akan tersedia seusai instalasi.

en: Mandrake Terminal Server Configuration
target: Konfigurasi Server Terminal Mandrake

en: Mandrake Tools Explanation
target: Penjelasan Piranti Mandrake

en: Mandrake's multipurpose configuration tool
target: Konfigurator multiguna Mandrake

en: MandrakeExpert Corporate
target: AhliMandrake Perusahaan

en: MandrakeSoft has designed exclusive tools to create the most secured Linux version ever: Draksec, a system security management tool, and a strong firewall are teamed up together  in order to highly reduce hacking risks.
target: MandrakeSoft telah mendesain alat eksklusif utk membuat versi Linux teraman: Draksec (manajer keamanan sistem) & sebuah firewall kokoh dipadukan utk menangkis hacker.

en: MandrakeSoft has selected the best software for you
target: MandrakeSoft telah memilih software terbaik utk Anda

en: Manual configuration
target: Konfigurasi manual

en: March
target: Maret

en: Marshall Islands
target: Kepulauan Marshall

en: Matching
target: Pencocokan

en: May
target: Mei

en: Media class
target: Kelas media

en: Messages
target: Pesan

en: Mexico
target: Meksiko

en: Micronesia
target: Mikronesia

en: Minimal install
target: Instalasi minimal

en: Model name
target: Nama model

en: Model stepping
target: Stepping model

en: Modify
target: Modifikasi

en: Modify RAID
target: Ganti RAID

en: Modify printer configuration
target: Modifikasi konfigurasi printer

en: Module
target: Modul

en: Module name
target: Nama modul

en: Module options:
target: Pilihan Modul:

en: Monaco
target: Monako

en: Monday
target: Senin

en: Mongolian (cyrillic)
target: Mongol (cyrillic)

en: Monitor HorizSync: %s
target: HorizSync Monitor: %s

en: Monitor VertRefresh: %s
target: VertRefresh Monitor: %s

en: More
target: Lainnya

en: More Options
target: Opsi Tambahan

en: Morocco
target: Maroko

en: Most of these values were extracted
    from your running system.
    You can modify as needed.
target: Sebagian besar nilai disusun dari sistem Anda
    yg sedang berjalan. Ubah seperlunya.

en: Mount options
target: Opsi mount

en: Mount point
target: Posisi mount

en: Mount point:
target: Posisi mount:

en: Mount points must begin with a leading /
target: Mount point harus diawali dengan /

en: Mount points should contain only alphanumerical characters
target: Titik mount harus hanya berupa huruf atau angka

en: Mount the file system read-only.
target: Mount sistem file read-only.

en: Mounted
target: Telah di-mount

en: Mounting partition %s
target: Gandeng partisi %s

en: Mounts and unmounts all Network File System (NFS), SMB (Lan
    Manager/Windows), and NCP (NetWare) mount points.
target: Mount dan unmount semua Network File System (NFS), SMB (Lan
    Manager/windows), dan NCP (Netware).

en: Mouse Port
target: Port Mouse

en: Mouse Systems
target: Sistem Mouse (serial)

en: Mouse device: %s
target: Device Mouse: %s

en: Mouse test
target: Tes Mouse

en: Mouse type: %s
target: Jenis Mouse: %s

en: Move
target: Pindah

en: Move files to the new partition
target: Pindah file ke partisi baru

en: Move selected rule down one level
target: Turunkan aturan terpilih satu level

en: Move selected rule up one level
target: Naikkan aturan terpilih satu level

en: Moving
target: Pindah

en: Moving files to the new partition
target: Pindah file ke partisi baru

en: Moving partition...
target: Memindahkan partisi...

en: Multi-head configuration
target: Konfigurasi head majemuk

en: Multimedia station
target: Komputer Multimedia

en: Multisession CD
target: CD multisesi

en: Myanmar (Burmese)
target: Myanmar (Burma)

en: NCP queue name missing!
target: Nama antrian NCP hilang!

en: NCP server name missing!
target: Nama server NCP hilang!

en: NFS is a popular protocol for file sharing across TCP/IP
    networks. This service provides NFS file locking functionality.
target: NFS adalah protokol populer untuk file sharing di TCP/IP
    Servis ini memberikan fungsi file lock pada NFS.

en: NFS is a popular protocol for file sharing across TCP/IP networks.
    This service provides NFS server functionality, which is configured via the
    /etc/exports file.
target: NFS adalah protokol populer untuk file sharing lewat network TCP/IP.
    Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan menggunakan
    konfigurasi pada file /etc/exports.

en: NFS server, SMB server, Proxy server, ssh server
target: server NFS, SMB, Proxy, SSH

en: NIS Domain
target: Domain NIS

en: NIS Server
target: Server NIS

en: NONE
target: TIADA

en: NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.
target: CATATAN: Akan diinstal piranti lunak tambahan hingga %d MB tergantung model printer dan sistem cetak.

en: NTP Server
target: Server NTP

en: Name
target: Nama

en: Name Servers:
target: Server Nama:

en: Name of printer
target: Nama Printer

en: Name of printer should contain only letters, numbers and the underscore
target: Nama printer harus hanya berupa huruf, angka, atau garisbawah

en: Name of the profile to create (the new profile is created as a copy of the current one) :
target: Nama profil yg akan dibuat (profil baru dibuat sbg salinan yg sekarang) :

en: Name resolution spoofing protection
target: Proteksi penipuan nama

en: Name/IP address of host:
target: Nama/alamat IP host:

en: Name:
target: Nama:

en: Need hostname, username and password!
target: Perlu namahost, namapengguna dan katasandi!

en: Need to create /etc/dhcpd.conf first!
target: Perlu bikin dulu /etc/dhcpd.conf first!

en: Need to restart the Display Manager for full changes to take effect. 
    (service dm restart - at the console)
target: Manajer Display harus dijalankan ulang agar perubahan berlaku.
    (di konsol lakukan: service dm restart)

en: Net Boot Images
target: Image Boot Net

en: Net Device
target: Device Net

en: Net Method:
target: Metode Jaring:

en: NetWare Printer Options
target: Pilihan printer NetWare

en: Netherlands
target: Belanda

en: Netherlands Antilles
target: Belanda Antilles

en: Network
target: Jaringan

en: Network %s
target: Jaringan %s

en: Network & Internet
target: Jaringan & Internet

en: Network Computer (client)
target: Komputer Jaringan (klien)

en: Network Computer server
target: Komputer Server Jaringan

en: Network Configuration
target: Konfigurasi Jaringan

en: Network Configuration Wizard
target: Wizard Konfigurasi Jaringan

en: Network Hotplugging
target: Hotplugging Jaringan

en: Network Monitoring
target: Pemantauan Jaringan

en: Network Options
target: Opsi Jaringan

en: Network configuration
target: Konfigurasi jaringan

en: Network configuration (%d adapters)
target: Konfigurasi Jaringan (adapter %d)

en: Network functionality not configured
target: Fungsi network tak dikonfigurasi

en: Network interface
target: Antarmuka jaringan

en: Network interface already configured
target: Antarmuka network telah dikonfigurasi

en: Network printer "%s", port %s
target: Printer jaringan "%s", port %s

en: Network printer (TCP/Socket)
target: Printer jaringan (TCP/Socket)

en: New
target: Baru

en: New Caledonia
target: Caledonia Baru

en: New devfs device
target: Device devfs baru

en: New printer name
target: Nama printer baru

en: New profile...
target: Buat profil baru...

en: New size in MB:
target: Ukuran baru dalam MB:

en: New user list:
target: Daftar pengguna baru:

en: Newzealand
target: Selandia Baru

en: Next
target: Lanjut

en: Next ->
target: Lanjutkan ->

en: No
target: Tidak

en: No (experts only)
target: Tidak (hanya ahli)

en: No CD device defined!
target: Tidak ada alat CD didefinisikan!

en: No CD or DVD image found, please copy the installation program and rpm files.
target: Image CD atau DVD tak ditemukan, copy-lah program instalasi dan file rpm.

en: No CD-R/DVD-R in drive!
target: Tiada CDR/DVDR di drive!

en: No ISDN PCI card found. Please select one on the next screen.
target: Tiada kartu PCI ISDN ditemukan. Pilihlah satu pd layar berikut.

en: No Internet Connection Sharing has ever been configured.
target: Internet Connection Sharing belum pernah dikonfigurasikan

en: No NIC selected!
target: Tidak ada NIC yg dipilih!

en: No Sound Card detected!
target: Kartu Suara tak terdeteksi!

en: No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Kartu Suara tak terdeteksi. Pastikan Kartu Suara yg disupport Linux terhubung dengan benar.
    
    
    Kunjungi database piranti keras di:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No TV Card detected!
target: Kartu TV tak terdeteksi!

en: No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
    
    
    You can visit our hardware database at:
    
    
    http://www.linux-mandrake.com/en/hardware.php3
target: Kartu TV tak terdeteksi. Pastikan Kartu Video/TV yg disupport Linux terhubung dengan benar.
    
    
    Kunjungi database piranti keras di:
    
    
    http://www.linux-mandrake.com/en/hardware.php3

en: No additional information
    about this service, sorry.
target: Mohon maaf, informasi lengkap
    tentang layanan ini tidak tersedia.

en: No alternative driver
target: Tiada driver alternatif

en: No browser available! Please install one
target: Browser tak tersedia! Installah satu

en: No browser is installed on your system, Please install one if you want to browse the help system
target: Browser tak ditemukan. Silakan instal satu jika Anda ingin menjelajah sistem pertolongan

en: No changes to backup!
target: Tak ada perubahan backup!

en: No configuration file found 
    please click Wizard or Advanced.
target: File konfigurasi tak ditemukan
    silakan klik Dukun atau Lanjutan

en: No configuration, please click Wizard or Advanced.
target: Tiada konfigurasi, mohon klik Dukun atau Lanjutan.

en: No details
target: Tanpa Detil

en: No ethernet network adapter has been detected on your system.
    I cannot set up this connection type.
target: Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.
    Tipe koneksi ini tak dapat diset up.

en: No ethernet network adapter has been detected on your system. Please run the hardware configuration tool.
target: Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware.

en: No floppy drive available
target: Tidak ada floppy drive

en: No floppy drive available!
target: Floppy drive tak tersedia

en: No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake
target: Tiada ruang 1MB utk bootstrap! Instal akan berlanjut, tetapi utk mem-boot sistem, Anda perlu membuat partisi bootstrap di DiskDrake

en: No hard drives found
target: Harddisk tak ditemukan

en: No image found
target: Image tak ditemukan

en: No kernel selected!
target: Tiada kernel terpilih!

en: No known driver
target: Tiada driver yg diketahui

en: No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).
target: Printer tak ditemukan! Untuk menginstal printer secara manual masukkan nama alat / file di baris masukan (Port Parallel: /dev/lp0, /dev/lp1, ..., sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...).

en: No mouse
target: Tidak pakai mouse

en: No net boot images created!
target: Image boot jaringan tak dibuat!

en: No network adapter on your system!
target: Tidak ada adaptor jaringan di sistem ini!

en: No network card
target: Tiada kartu jaringan

en: No open source driver
target: Tidak ada driver open source

en: No partition available
target: Tidak ada partisi

en: No password
target: Tanpa katasandi

en: No password aging for
target: Tidak ada penuaan katasandi utk

en: No password prompt on %s at port %s
target: Tiada prompt katasandi di %s pada port %s

en: No printer
target: Tiada printer

en: No printer found!
target: Printer tak ditemukan!

en: No remote machines
target: Tiada mesin remote

en: No sharing
target: Tanpa sharing

en: No sound card detected. Try "harddrake" after installation
target: Kartu suara tak terdeteksi. Coba "harddrake" setelah instalasi

en: No tape in %s!
target: Tak ada pita di %s!

en: No test pages
target: Tiada halaman tes

en: No, I don't want autologin
target: Tidak, saya tak mau autologin

en: None
target: Tiada

en: Norfolk Island
target: Kepulauan Norfolk

en: Normal Mode
target: Modus Normal

en: Normal modem connection
target: Konfigurasi koneksi modem biasa

en: Northern Mariana Islands
target: Kepulauan Mariana Utara

en: Norway
target: Norwegia

en: Norwegian
target: Norwegia

en: Not connected
target: Tak tersambung

en: Not enough free space for auto-allocating
target: Tak cukup ruangan untuk alokasi otomatis

en: Not enough free space to allocate new partitions
target: Tidak ada cukup ruangan untuk mengalokasikan partisi baru

en: Not enough partitions for RAID level %d
target: Partisi tidak cukup untuk level RAID %d

en: Not enough swap space to fulfill installation, please add some
target: Instalasi tak dapat diteruskan karena swap kurang, tambahkan

en: Not erasable media!
target: Media tak terhapuskan

en: Not formatted
target: Belum diformat

en: Not installed
target: Tak terinstal

en: Not the correct CD label. Disk is labelled %s.
target: Bukan label CD yang benar. Disk berlabel %s.

en: Not the correct tape label. Tape is labelled %s.
target: Bukan label pita yang benar. Pita berlabel %s.

en: Nothing to do
target: Tiada yang dikerjakan

en: Notice
target: Catatan

en: Now, you can run xawtv (under X Window!) !
target: Kini Anda dapat menjalankan xawtv di Window X

en: Number of buttons
target: Jumlah tombol

en: Number of capture buffers:
target: Jumlah buffer penangkap :

en: OK to restore the other files.
target: OK utk restorasi file lain.

en: OKI winprinter configuration
target: Konfigurasi winprinter OKI

en: October
target: Oktober

en: Office Workstation
target: Komputer Kantor

en: Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc
target: Program office: pengolah kata (kword, abiword), spreadsheet (kspread, gnumeric), viewer pdf,dsb

en: Old device file
target: File device lama

en: Old user list:
target: Daftar pengguna lama:

en: On CD-R
target: di CDROM

en: On CUPS server "%s"
target: Di server CUPS "%s"

en: On Floppy
target: Di disket

en: On Hard Drive
target: di Hard Drive

en: On Tape Device
target: di Device Pita

en: On boot
target: Saat boot

en: Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame ("Information")
target: Sekali memilih device, Anda akan dapat melihat info-nya di frame kanan ("Info")

en: Open Firmware Delay
target: Delay Open Firmware

en: Optimize your security by using Mandrake Linux
target: Optimasi keamanan

en: Option %s must be a number!
target: Opsi %s harus berupa bilangan!

en: Option %s must be an integer number!
target: Opsi %s harus berupa integer!

en: Option %s out of range!
target: Opsi %s keluar batas!

en: Option ``Restrict command line options'' is of no use without a password
target: Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa katasandi

en: Options
target: Opsi

en: Options: %s
target: Pilihan: %s

en: Other
target: Lainnya

en: Other Graphical Desktops
target: Desktop Grafis lainnya

en: Other Media
target: Media Lain

en: Other MultiMedia devices
target: Piranti MultiMedia Lain

en: Other OS (MacOS...)
target: OS Lain (MacOS...)

en: Other OS (SunOS...)
target: OS Lain (SunOS...)

en: Other OS (windows...)
target: OS Lain (mindows...)

en: Other ports
target: Port lain

en: Our full range of Linux solutions, as well as special offers on products and other "goodies", are available on our e-store:
target: Solusi Linux lengkap, termasuk sajian khusus produk dan "goodies" lain, tersedia online di e-store kami:

en: PCMCIA support is usually to support things like ethernet and
    modems in laptops.  It won't get started unless configured so it is safe to have
    it installed on machines that don't need it.
target: PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem
    pada laptop. Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak
    apa-apa kalau tak diinstal di mesin yang tak perlu PCMCIA.

en: PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel.
target: Support PCMCIA tak ada lagi utk kernel 2.2, pakailah kernel 2.4.

en: PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
target: PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.

en: PLL setting:
target: setting PLL :

en: POP and IMAP Server
target: Server POP dan IMAP

en: PXE Server Configuration
target: Konfigurasi Server PXE

en: Package Group Selection
target: Pilihan Grup Paket

en: Package not installed
target: Paket tak terinstal

en: Package selection
target: Pilihan paket

en: Package:
target: Paket:

en: Palestine
target: Palestina

en: Parameters
target: Parameter

en: Paranoid
target: Penakut

en: Partition booted by default
        (for MS-DOS boot, not for lilo)
target: Partisi di-boot secara default
        (untuk MS-DOS boot, bukan untuk lilo)

en: Partition table of drive %s is going to be written to disk!
target: Tabel partisi pada drive %s akan ditulis ke disk!

en: Partition table type: %s
target: Partisi tipe: %s

en: Partitioning
target: Pembuatan partisi

en: Partitioning failed: %s
target: Proses partisi gagal: %s

en: Password
target: Katasandi

en: Password (again)
target: Katasandi (lagi)

en: Password history length
target: Panjang sejarah katasandi

en: Password minimum length and number of digits and upcase letters
target: Panjang minimum katasandi serta jumlah digit dan huruf besar

en: Password required
target: Katasandi dibutuhkan

en: Passwords are now enabled, but use as a networked computer is still not recommended.
target: Katasandi akan diaktifkan, tapi mohon jangan disambungkan ke jaringan.

en: Path or Module required
target: Path atau Modul dibutuhkan

en: Path selection
target: Pilihan path

en: Perfectly adapt your computer to your needs thanks to the 11 available Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME 2.2, Window Maker, ...
target: Tersedia 11 antarmuka yg dapat dimodifikasi: KDE 3.1, Gnome 2.2, WindowMaker, ...

en: Periodic Checks
target: Cek Periodik

en: Permission denied transferring %s to %s
target: Tak ada izin pemindahan %s ke %s

en: Permission problem accessing CD.
target: Problem izin pada akses CD.

en: Permissions
target: Izin

en: Philippines
target: Filipina

en: Phone number
target: Nomor telepon

en: Photo memory card access on your HP multi-function device
target: Akses kartu memori foto pada alat multifungsi HP Anda

en: Photo test page
target: Halaman tes foto

en: Pipe into command
target: Pipe ke perintah

en: Pipe job into a command
target: Pipe job ke perintah

en: Please Wait... Applying the configuration
target: Tunggu, konfigurasi sedang diterapkan...

en: Please check all users that you want to include in your backup.
target: Periksa semua pengguna yang ingin Anda masukkan ke backup.

en: Please choose a language to use.
target: Pilihlah bahasa yg akan dipakai.

en: Please choose for each step whether it will replay like your install, or it will be manual
target: Pada tiap tahapan pilih apakah instalasi akan diulang, atau akan manual

en: Please choose load or save package selection on floppy.
    The format is the same as auto_install generated floppies.
target: Pilih muat/simpan seleksi paket di floppy.
    Formatnya sama dengan floppy buatan auto_install.

en: Please choose the desired security level
target: Pilih tingkat keamanan yg Anda inginkan

en: Please choose the first number of the 10-range you wish to edit,
    or just hit Enter to proceed.
    Your choice?
target: Pilihlah nomor pertama dari 10-range yang ingin Anda edit,
    atau tekan Enter untuk melanjutkan.
    Pilihan Anda?

en: Please choose the port that your printer is connected to or enter a device name/file name in the input line
target: Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di baris masukan

en: Please choose the port that your printer is connected to.
target: Pilihlah port tempat printer Anda terhubung.

en: Please choose the printer to which the print jobs should go or enter a device name/file name in the input line
target: Pilih printer tempat job cetak Anda harus disalurkan atau ketikkan nama device/file

en: Please choose the printer to which the print jobs should go.
target: Pilihlah printer tempat job cetak harus disalurkan.

en: Please choose the printer you want to set up or enter a device name/file name in the input line
target: Pilih printer yg ingin diset up atau ketikkan nama device/file

en: Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Pilihlah printer yang ingin diset up. Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "Konfigurasi manual".

en: Please choose what network adapter will be connected to your Local Area Network.
target: Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network Anda.

en: Please choose what you want to backup
target: Pilih apa yang akan di-backup

en: Please choose where you want to backup
target: Pilih tempat backup

en: Please choose which network adapter you want to use to connect to Internet.
target: Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet

en: Please choose which network interface will be used for the dhcp server.
target: Pilihlah antarmuka jaringan yang akan digunakan sbg server dhcp.

en: Please choose which serial port your modem is connected to.
target: Di serial port mana modem Anda terhubung?

en: Please choose which serial port your mouse is connected to.
target: Di serial port mana mouse Anda dicolokkan ?

en: Please choose your country.
target: Pilih negara Anda.

en: Please choose your keyboard layout.
target: Pilih layout papanketik Anda

en: Please choose your mouse type.
target: Pilih tipe mouse Anda.

en: Please choose your type of mouse.
target: Pilihlah tipe mouse Anda.

en: Please click on a partition
target: Silakan pilih partisi

en: Please enter the IP configuration for this machine.
    Each item should be entered as an IP address in dotted-decimal
    notation (for example, 1.2.3.4).
target: Masukkan konfigurasi IP untuk mesin ini.
    Tiap item harus diberikan sebagai alamat IP dalam notasi decimal
    bertitik (misalnya 202.159.35.32).

en: Please enter the WebDAV server URL
target: Masukkan URL server WebDAV

en: Please enter the name of the interface connected to the internet.
    
    Examples:
    		ppp+ for modem or DSL connections, 
    		eth0, or eth1 for cable connection, 
    		ippp+ for a isdn connection.
target: Masukkan nama antarmuka yg terhubung dg Internet.
    
    Misal:
    		ppp+ utk modem atau koneksi DSL, 
    		eth0, atau eth1 utk koneksi kabel, 
    		ippp+ utk koneksi isdn.

en: Please enter your email address below
target: Masukkan alamat email Anda di bawah

en: Please enter your host name.
    Your host name should be a fully-qualified host name,
    such as ``mybox.mylab.myco.com''.
    You may also enter the IP address of the gateway if you have one.
target: Masukkan nama host Anda.
    Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified
    misalnya ``mesin.lab.grup.com''.
    Anda juga bisa masukkan alamat IP gateway kalau ada

en: Please enter your username, password and domain name to access this host.
target: Masukkan nama pengguna, katasandi dan nama domain utk mengakses host ini.

en: Please fill or check the field below
target: Silakan isi atau cek kolom berikut

en: Please give a user name
target: Silakan tulis nama pengguna

en: Please indicate where the auto_install.cfg file is located.
    
    Leave it blank if you do not want to set up automatic installation mode.
target: Di mana file auto_install.cfg berada?
    
    Biarkan kosong jika tak ingin men-set up modus instalasi otomatis.

en: Please indicate where the installation image will be available.
    
    If you do not have an existing directory, please copy the CD or DVD contents.
target: Tunjukkan tempat image instalasi akan ditaruh.
    
    Jika Anda tak punya direktori, copy-lah isi CD/DVD

en: Please insert floppy disk:
target: Masukkan floppy:

en: Please insert the Boot floppy used in drive %s
target: Masukkan floppy boot ke drive %s

en: Please insert the Installation Cd-Rom in your drive and press Ok when done.
    If you don't have it, press Cancel to avoid live upgrade.
target: Masukkan CDROM Instalasi di drive Anda dan tekan OK
    Jika tak punya, tekan Batal untuk hindari upgrade live.

en: Please insert the Update Modules floppy in drive %s
target: Masukkan disket Update Modules ke drive %s

en: Please log out and then use Ctrl-Alt-BackSpace
target: Silakan log out dan tekan Ctrl-Alt-BackSpace

en: Please make a backup of your data first
target: Lebih dulu buatlah backup data Anda

en: Please select data to backup...
target: Pilih data backup...

en: Please select data to restore...
target: Pilih data utk direstorasi...

en: Please select media for backup...
target: Pilih media backup...

en: Please select the correct port. For example, the "COM1" port under
    Windows is named "ttyS0" under GNU/Linux.
target: Pilih port yang benar. Misalnya "COM1" di Mindows bernama "ttyS0" di 
    GNU/Linux.

en: Please select the device where your %s is attached
target: Pilihlah device tempat %s terhubung

en: Please select the test pages you want to print.
    Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page.
target: Pilihlah halaman tes yang ingin Anda cetak.
    Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar.

en: Please test the mouse
target: Silakan tes mouse Anda

en: Please test your mouse:
target: Silakan tes mouse Anda:

en: Please try again
target: Silakan ulangi

en: Please uncheck or remove it on next time.
target: Mohon uncheck atau hapus nanti.

en: Please wait
target: Tunggu...

en: Please wait, preparing installation...
target: Tunggu, instalasi sedang disiapkan...

en: Please wait, setting security level...
target: Tunggu, tingkat keamanan sedang diset...

en: Please wait, setting security options...
target: Tunggu, opsi keamanan sedang diset...

en: Please,
    type in your tv norm and country
target: Tolong,
    tuliskan standar dan daerah tv Anda

en: Please, choose your keyboard layout.
target: Pilih papanketik Anda

en: Plug'n Play probing failed. Please select the correct monitor
target: Probe Plug'n Play gagal. Pilihlah monitor yang benar

en: Poland
target: Polandia

en: Polish
target: Polandia

en: Polish (qwerty layout)
target: Polandia (layout qwerty)

en: Polish (qwertz layout)
target: Polandia (layout qwertz)

en: Poor
target: Lemah

en: Portugal
target: Portugis

en: Portuguese
target: Portugis

en: Post Install
target: Instalasi Akhir

en: Post Uninstall
target: Un-Instalasi Akhir

en: Post-install configuration
target: Konfigurasi instalasi akhir

en: Postfix Mail Server
target: Server Mail Postfix

en: Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another.
target: Postfix adalah Mail Transport Agent, program pengantar surat dari satu ke lain mesin.

en: Postfix mail server
target: Server mail Postfix

en: PostgreSQL or MySQL database server
target: Server database PostgreSQL atau MySQL

en: Potential LAN address conflict found in current config of %s!
target: Ada potensi konflik alamat LAN pada konfigurasi %s!

en: Precise RAM size if needed (found %d MB)
target: Ukuran RAM yg tepat (ditemukan %d MB)

en: Preference:
target: Kesukaan:

en: Preferences
target: Kesukaan

en: Preparing bootloader...
target: Membuat bootloader

en: Preparing installation
target: Sedang menyiapkan instalasi

en: Preparing printer database...
target: Persiapan database printer ...

en: Press enter to boot the selected OS, 'e' to edit the
target: Tekan enter untuk memboot OS yang terpilih, atau tekan 'e' untuk edit

en: Preview
target: Prapandang

en: Print
target: Cetak

en: Print Queue Name
target: Nama antrian printer

en: Print option list
target: Daftar opsi cetak

en: Print test pages
target: Cetak halaman tes

en: Printer "%s" on SMB/Windows server "%s"
target: Printer "%s" di server SMB/Windows "%s"

en: Printer "%s" on server "%s"
target: Printer "%s" di server "%s"

en: Printer %s
    What do you want to modify on this printer?
target: Printer %s
    Apa yg Anda inginkan utk modifikasi printer ini?

en: Printer Device URI
target: Device Printer URI

en: Printer Server
target: Server Printer

en: Printer auto-detection
target: Deteksi otomatis printer

en: Printer auto-detection (Local, TCP/Socket, and SMB printers)
target: Printer deteksi otomatis (Lokal, TCP/Socket, dan SMB)

en: Printer connection type
target: Tipe koneksi printer

en: Printer default settings
target: Setting default printer

en: Printer default settings
    
    You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.
target: Setting standar printer
    
    Cek ukuran halaman dan jenis tinta/mode cetak (jika ada) juga konfigurasi perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, pencetakan dg kualitas tinggi berjalan amat lambat.

en: Printer host name or IP
target: Nama host atau IP printer

en: Printer host name or IP missing!
target: Nama host printer atau IP tidak ada!

en: Printer manufacturer, model
target: Pembuat, model printer

en: Printer manufacturer, model, driver
target: Pembuat, model, driver printer

en: Printer model selection
target: Seleksi model printer

en: Printer name, description, location
target: Nama, penjelasan, lokasi printer

en: Printer on NetWare server
target: Printer di server NetWare

en: Printer on SMB/Windows 95/98/NT server
target: Printer di server SMB/windows 95/98/NT

en: Printer on parallel port #%s
target: Printer di port paralel #%s

en: Printer on remote CUPS server
target: Printer di server CUPS remote

en: Printer on remote lpd server
target: Printer di server lpd remote

en: Printer options
target: Opsi printer

en: Printer sharing on hosts/networks:
target: Sharing printer di host/jaringan:

en: Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click "The model is correct" if so and if not, click "Select model manually" so that you can choose your printer model manually on the next screen.
    
    For your printer Printerdrake has found:
    
    %s
target: Printerdrake telan membandingkan nama model printer terdeteksi dengan daftar model di database untuk menemukan yang paling cocok. Ini mungkin salah, khususnya jika printer Anda tak terdaftar di semua database. Periksa apakah pilihan sudah benar dan klik "Model sudah benar", jika salah, klik "Pilih model secara manual" sehingga Anda dapat memilih model printer Anda secara manual di layar berikut.
    
    Printerdrake telah menemukan:
    
    %s

en: Printing
target: Pencetakan

en: Printing on the printer "%s"
target: Pencetakan di printer "%s"

en: Printing test page(s)...
target: Pencetakan halaman tes...

en: Printing/Photo Card Access on "%s"
target: Cetak/Akses Kartu Foto di "%s"

en: Printing/Scanning on "%s"
target: Cetak/Scan di "%s"

en: Printing/Scanning/Photo Cards on "%s"
target: Cetak/Scan/Kartu Foto di "%s"

en: Problems installing package %s
target: Problem instalasi paket %s

en: Problems occured during configuration.
    Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.
target: Problem konfigurasi.
    Tes koneksi Anda via net_monitor atau mcc. Jika koneksi tak berjalan, Anda mungkin perlu jalankan konfigurasi dari awal lagi

en: Processor ID
target: ID prosesor

en: Processors
target: Prosesor

en: Profile
target: Profil

en: Profile to delete:
target: Profil yang hendak dihapus:

en: Profile:
target: Profil:

en: ProgressBar color selection
target: Pilihan warna ProgressBar

en: Property
target: Properti

en: Protocol
target: Protokol

en: Protocol for the rest of the world
target: Protokol lain

en: Protocol for the rest of the world
    No D-Channel (leased lines)
target: Protokol lain 
     tanpa D-Channel (leased lines)

en: Provider dns 1 (optional)
target: DNS Provider 1 (boleh diisi boleh tidak)

en: Provider dns 2 (optional)
target: DNS Provider 2 (boleh diisi boleh tidak)

en: Provider name (ex provider.net)
target: Nama provider (misalnya provider.net.id)

en: Provider phone number
target: Nomor telepon provider

en: Proxies configuration
target: Konfigurasi proxy

en: Proxy should be http://...
target: Proxy biasanya http://...

en: Quit
target: Keluar

en: Quit without saving
target: Keluar tanpa menyimpan

en: Quit without writing the partition table?
target: Keluar dari program tanpa menyimpan dalam tabel partisi?

en: RAID-disks %s
target: Disk RAID %s

en: Radio support:
target: Support radio :

en: Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough '0' (zeroes).
target: Rata2 harus berakhiran k, M atau G (mis. "11M" utk 11M), atau tambahkan '0' (nol) secukupnya.

en: Raw printer
target: Printer raw

en: Raw printer (No driver)
target: Printer raw (tanpa driver)

en: Re-configure interface and DHCP server
target: Konfigurasi ulang antarmuka dan server DHCP

en: Re-generating list of configured scanners ...
target: Daftar konfigurasi scanner sedang dibuat lagi...

en: Re-submit
target: Kirim ulang

en: Read
target: Baca

en: Read carefully!
target: Baca dengan seksama!

en: Read-only
target: Baca-saja

en: Reading data of installed printers...
target: Baca data dari printer terinstal...

en: Reading printer data...
target: Pembacaan data printer...

en: Reading printer database...
target: Pembacaan database printer...

en: Real name
target: Nama Lengkap

en: Reboot
target: Boot Ulang

en: Reboot by the console user
target: Reboot oleh pengguna konsol

en: Receiving Speed:
target: Laju Penerimaan:

en: Refresh
target: Penyegaran

en: Refresh printer list (to display all available remote CUPS printers)
target: Penyegaran daftar printer (utk menampilkan semua printer CUPS remote)

en: Refresh the list
target: Segarkan daftar

en: Refreshing printer data...
target: Penyegaran data printer...

en: Refuse
target: Tolak

en: Reload partition table
target: Muat ulang tabel partisi

en: Remember this password
target: Ingat katasandi ini

en: Remote Administration
target: Administrasi remote

en: Remote CUPS server
target: Server CUPS remote

en: Remote Control
target: Kontrol Remote

en: Remote host name
target: Nama host remote

en: Remote host name missing!
target: Nama host remote hilang!

en: Remote lpd Printer Options
target: Pilihan printer lpd remote

en: Remote printer
target: printer remote

en: Remote printer name
target: Nama printer remote

en: Remote printer name missing!
target: Nama printer remote hilang!

en: Removable media automounting
target: Mount otomatis media lepas

en: Remove
target: Hapus

en: Remove List
target: Hapus Daftar

en: Remove Selected
target: Hapus Pilihan

en: Remove Windows
target: Buang M$ Windows

en: Remove Windows(TM)
target: Buang Mindows

en: Remove a module
target: Hapus modul

en: Remove fonts on your system
target: Hapus font di sistem Anda

en: Remove from LVM
target: Hapus dari LVM

en: Remove from RAID
target: Hapus dari RAID

en: Remove printer
target: Hapus printer

en: Remove selected host
target: Hapus host terpilih

en: Remove selected host/network
target: Hapus host/jaringan terpilih

en: Remove selected server
target: Hapus server yg dipilih

en: Remove the last item
target: Hapus item terakhir

en: Remove the logical volumes first
target: Hapus dulu volume logiknya

en: Remove the loopback file?
target: Hapus file loopback?

en: Remove this printer from Star Office/OpenOffice.org/GIMP
target: Hapus printer ini dari Star Office/OpenOffice.org/GIMP

en: Remove user directories before restore.
target: Hapus direktori pengguna sebelum restorasi.

en: Removing %s
target: Hapus %s

en: Removing %s ...
target: Hapus %s ...

en: Removing old printer "%s"...
target: Menghapus printer lama "%s"...

en: Removing printer "%s"...
target: Menghapus printer "%s"...

en: Removing printer from Star Office/OpenOffice.org/GIMP
target: Hapus printer dari Star Office/OpenOffice.org/GIMP

en: Replay
target: Ulang

en: Report
target: Laporan

en: Report check result by mail
target: Laporkan hasil cek via mail

en: Report check result to syslog
target: Laporkan hasil cek ke syslog

en: Report unowned files
target: Laporkan file tak bertuan

en: Reports check result to tty
target: Laporkan hasil cek ke tty

en: Rescue partition table
target: Selamatkan tabel partisi

en: Reselect correct fonts
target: Pilih ulang font yg benar

en: Resize
target: Ubah ukuran

en: Resizing
target: Sedang mengubah ukuran

en: Resizing Windows partition
target: Sedang menghitung bound sistem file Mindows

en: Resolution
target: Resolusi

en: Resolution
    
       Here you can choose the resolutions and color depths available for your
    hardware. Choose the one that best suits your needs (you will be able to
    change that after installation though). A sample of the chosen
    configuration is shown in the monitor.
target: Resolusi
    
       Anda dapat memilih resolusi dan kedalaman warna yg tersedia utk piranti
    keras Anda. Pilihlah yg paling sesuai dg kebutuhan Anda (Anda dapat
    menggantinya setelah instalasi). Contoh konfigurasi yg Anda pilih akan
    ditampilkan di monitor.

en: Resolution: %s
target: Resolusi: %s

en: Resolutions
target: Resolusi

en: Restart XFS
target: Jalankan ulang XFS

en: Restarting CUPS...
target: Jalankan ulang CUPS...

en: Restarting printing system...
target: Mulai ulang sistem cetak ...

en: Restore
target: Restorasi

en: Restore Failed...
target: Restorasi Gagal...

en: Restore From CD
target: Restorasi Dari CD

en: Restore From Catalog
target: Restorasi Dari Katalog

en: Restore From Tape
target: Restorasi Dari Pita

en: Restore Other
target: Restorasi Lain-lain

en: Restore Progress
target: Perkembangan Restorasi

en: Restore Selected
target: Restorasi Terpilih

en: Restore Selected
    Catalog Entry
target: Restorasi Entri
    Katalog Terpilih

en: Restore Selected
    Files
target: Restorasi File
    Terpilih

en: Restore Users
target: Restorasi Pengguna

en: Restore Via Network
target: Restorasi Via Jaringan

en: Restore Via Network Protocol: %s
target: Restorasi Via Protokol Jaringan: %s

en: Restore all backups
target: Restorasi semua backup

en: Restore from Hard Disk.
target: Restorasi dari Hard Disk.

en: Restore partition table
target: Kembalikan tabel partisi

en: Restore system
target: Restorasi sistem

en: Restoring from file %s failed: %s
target: Proses restore dari file %s gagal: %s

en: Restrict command line options
target: Batasi parameter command line

en: Right "Windows" key
target: Kunci "Mindows" kanan

en: Right Alt key
target: kunci Alt Kanan

en: Right Control key
target: Kunci Control kanan

en: Right Shift key
target: Kunci Shift kanan

en: Romanian (qwerty)
target: Romania (qwerty)

en: Romanian (qwertz)
target: Romania (qwertz)

en: Root partition size in MB:
target: Ukuran partisi root dalam MB:

en: Root password
target: Katasandi root

en: Root umask
target: Umask root

en: Routers:
target: Router:

en: Run "sndconfig" after installation to configure your sound card
target: Jalankan "sndconfig" setelah instalasi untuk konfigurasi kartu suara

en: Run chkrootkit checks
target: Jalankan cek chkrootkit

en: Run config tool
target: Jalankan alat konfigurasi

en: Run some checks against the rpm database
target: Cek database rpm

en: Run the daily security checks
target: Jalankan cek keamanan harian

en: Running "%s" ...
target: Jalankan "%s"...

en: Runs commands scheduled by the at command at the time specified when
    at was run, and runs batch commands when the load average is low enough.
target: Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu
    saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load
    sedang rendah.

en: Russia
target: Rusia

en: Russian
target: Rusia

en: Russian (Phonetic)
target: Rusia (fonetik)

en: SCSI controllers
target: Pengontrol SCSI

en: SECURITY WARNING!
target: PERINGATAN KEAMANAN!

en: SILO Installation
target: Instalasi SILO

en: SMB (Windows 9x/NT) Printer Options
target: Pilihan printer SMB (windows 95/NT)

en: SMB server IP
target: IP server SMB

en: SMB server host
target: Host server SMB

en: SMBus controllers
target: Pengontrol SMBus

en: SSH Server
target: Server SSH

en: Saami (norwegian)
target: Saami (norwegia)

en: Sagem (using dhcp) usb
target: usb Sagem (menggunakan dhcp)

en: Sagem (using pppoa) usb
target: usb Sagem (menggunakan pppoa)

en: Saint Helena
target: Santa Helena

en: Saint Kitts and Nevis
target: Santa Kitts dan Nevis

en: Saint Lucia
target: Santa Lucia

en: Saint Pierre and Miquelon
target: Santa Pierre dan Miquelon

en: Saint Vincent and the Grenadines
target: Santa Vincent dan Grenadin

en: Samba Server
target: Server Samba

en: Samba share name missing!
target: Nama share Samba hilang!

en: Sao Tome and Principe
target: Sao Tome dan Principe

en: Saturday
target: Sabtu

en: Saudi Arabia
target: Arab Saudi

en: Save
target: Simpan

en: Save as..
target: Simpan sbg..

en: Save on floppy
target: Simpan di floppy

en: Save packages selection
target: Simpan pilihan paket

en: Save partition table
target: Simpan tabel partisi

en: Save theme
target: Simpan tema

en: Saves and restores system entropy pool for higher quality random
    number generation.
target: Menyimpan dan mengembalikan pool entropi sistem untuk membuat
    angka acak dengan kualitas sangat acak.

en: Scanner sharing
target: Sharing scanner

en: Scanner sharing to hosts:
target: Sharing scanner ke host:

en: Scanning for TV channels
target: Men-scan kanal TV

en: Scanning for TV channels in progress ...
target: Kanal TV sedang di-scan ...

en: Scanning network...
target: Jaringan sedang di-scan...

en: Scanning on your HP multi-function device
target: Sedang men-scan alat multifungsi HP Anda

en: Scanning partitions to find mount points
target: Mendeteksi partisi untuk mencari lokasi mount

en: Scientific Workstation
target: Aplikasi Ilmu pengetahuan

en: Scientific applications such as gnuplot
target: Aplikasi ilmiah semacam gnuplot

en: Screenshots will be available after install in %s
target: Screenshot akan tersedia setelah instal di %s

en: Search Backups
target: Cari Backup

en: Search for files to restore
target: Cari file utk direstorasi

en: Search for fonts in installed list
target: Cari font di daftar instalasi

en: Search for new scanners
target: Cari scanner baru

en: Search installed fonts
target: Cari font terinstal

en: Search new servers
target: Cari server baru

en: Search servers
target: Cari Server

en: Search:
target: Cari:

en: Searching for configured scanners ...
target: Cari scanner terkonfigurasi ...

en: Searching for new printers...
target: Cari printer baru...

en: Searching for new scanners ...
target: Cari scanner baru ...

en: Searching for scanners ...
target: Cari scanner...

en: Second DNS Server (optional)
target: Server DNS Sekunder (boleh tidak diisi)

en: Second floppy drive
target: Drive disket kedua

en: Sector
target: Sektor

en: Secure your networks with the Multi Network Firewall
target: Amankan jaringan Anda dg Tembok Api Jaringan Majemuk

en: Security
target: Keamanan

en: Security Administrator (login or email)
target: Admin Keamanan (login / email)

en: Security Administrator:
target: Admin Keamanan:

en: Security Alerts:
target: Pemberitahuan Keamanan:

en: Security Level
target: Tingkat Keamanan

en: Security Level:
target: Tingkat Keamanan:

en: Security level
target: Tingkat keamanan

en: See hardware info
target: Lihat info hardware

en: Select Printer Connection
target: Pilih koneksi Printer

en: Select Printer Spooler
target: Pilih spooler printer

en: Select a device !
target: Pilih device !

en: Select a scanner model
target: Pilih model scanner

en: Select another media to restore from
target: Pilih media lain utk direstorasi

en: Select file
target: Pilih file

en: Select installation class
target: Pilih kelas instalasi

en: Select model manually
target: Pilih model secara manual

en: Select the files or directories and click on 'OK'
target: Pilih file atau direktori dan klik 'OK'

en: Select the font file or directory and click on 'Add'
target: Pilih file font atau direktori dan klik 'Tambah'

en: Select the memory size of your graphics card
target: Pilih memori kartu grafis Anda

en: Select user manually
target: Pilih pengguna secara manual

en: Select your provider.
    If it isn't listed, choose Unlisted.
target: Pilih provider Anda.
    Bila tidak ada dalam daftar, pilih Tak Terdaftar

en: Selected All
target: Semua Dipilih

en: Selected size is larger than available space
target: Ukuran terpilih melebihi area yg ada

en: Send mail report after each backup to:
target: Kirim laporan mail setelah tiap backup ke :

en: Sending Speed:
target: Laju Pengiriman:

en: Sending files by FTP
target: Kirim file dg FTP

en: Sending files...
target: Kirim file...

en: Serbian (cyrillic)
target: Serbia (cyrillic)

en: Server IP missing!
target: Server IP hilang!

en: Services
target: Servis

en: Services and deamons
target: Services dan daemon

en: Services: %d activated for %d registered
target: Servis: %d diaktifkan utk %d tercatat

en: Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web
target: Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, tin..) dan untuk membrowse Web

en: Set of tools to read and send mail and news and to browse the Web
target: Kumpulan tool utk membaca, mengirim email dan news serta membrowse Web

en: Set password aging to "max" days and delay to change to "inactive".
target: Set umur katasandi "max" hari dan delay "inactice".

en: Set password expiration and account inactivation delays
target: Set kadaluarsa katasandi dan delay penonaktifan account

en: Set root password
target: Set katasandi root

en: Set root password and network authentication methods
target: Set katasandi root dan metode otentikasi jaringan.

en: Set the password history length to prevent password reuse.
target: Set panjang riwayat katasandi utk mencegah penggunaan ulang katasandi.

en: Set the password minimum length and minimum number of digit and minimum number of capitalized letters.
target: Set panjang minimum, jumlah minimum digit dan huruf besar katasandi.

en: Set the root umask.
target: Set umask root.

en: Set the shell timeout. A value of zero means no timeout.
target: Set timeout cangkang (shell). Nol = tidak ada timeout.

en: Set the user umask.
target: Set umask pengguna.

en: Set this printer as the default
target: Set printer ini sebagai standar

en: Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the "%s" connection type in Printerdrake.
target: Set up server Windows Anda agar printer tersedia di protokol IPP dan set up pencetakan dari mesin ini dengan tipe koneksi "%s" di Printerdrake.

en: Set-GID
target: Set-GID (ID Grup)

en: Set-UID
target: Set-UID (ID Pengguna)

en: Setting Default Printer...
target: Setting printer standar...

en: Settings
target: Setting

en: Share name
target: Nama share

en: Sharing of local printers
target: Berbagi printer lokal

en: Sharing of local scanners
target: Sharing scanner local

en: Shell
target: Cangkang

en: Shell history size
target: Ukuran sejarah cangkang

en: Shell timeout
target: Timeout cangkang (shell)

en: Show automatically selected packages
target: Tunjukkan paket yang sudah dipilih secara otomatis

en: Show current interface configuration
target: Tampilkan konfigurasi antarmuka

en: Show only for the selected day
target: Tampilkan hari terpilih saja

en: Singapore
target: Singapura

en: Size
target: Ukuran

en: Size in MB:
target: Ukuran dalam MB:

en: Size:
target: Ukuran:

en: Size: %s
target: Ukuran: %s

en: Size: %s
target: Ukuran: %s

en: Skip
target: Lewati

en: Slovakian (QWERTY)
target: Slovakia (QWERTY)

en: Slovakian (QWERTZ)
target: Slovakia (QWERTZ)

en: Slovenian
target: Slovenia

en: Software Manager
target: Manajer Software

en: Solomon Islands
target: Pulau Sulaiman

en: Some devices in the "%s" hardware class were removed:
target: Beberapa alat di kelas perangkat keras "%s" dihapus:

en: Some devices were added:
target: Beberapa device ditambahkan:

en: Some hardware on your computer needs ``proprietary'' drivers to work.
    You can find some information about them at: %s
target: Ada hardware di komputer ini yang membutuhkan driver ``proprietary''.
    Anda bisa mencari informasinya di: %s

en: Some important packages didn't get installed properly.
    Either your cdrom drive or your cdrom is defective.
    Check the cdrom on an installed computer using "rpm -qpl Mandrake/RPMS/*.rpm"
target: Ada paket penting yang tak benar diinstal.
    Mungkin drive cdrom atau cdromnya yang rusak.
    Cek dulu cdromnya di komputer yang sudah terinstal Linux dengan
    perintah "rpm -qpl Mandrake/RPMS/*.rpm"

en: Some of the early i486DX-100 chips cannot reliably return to operating mode after the "halt" instruction is used
target: Beberapa chip i486DX-100 tak dapat kembali ke mode operasi setelah perintah "halt" digunakan

en: Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path.
target: Bbrp protokol, misalnya rsync, dikonfigurasikan di pihak server. Nama 'modul' path servis akan dipakai, bukan path direktori.

en: Some steps are not completed.
    
    Do you really want to quit now?
target: Ada tahapan yang tidak diselesaikan.
    
    Anda ingin keluar sekarang?

en: Something bad is happening on your drive. 
    A test to check the integrity of data has failed. 
    It means writing anything on the disk will end up with random, corrupted data.
target: Ada yang aneh pada drive Anda,
    pengecekan integritas data tak berakhir normal.
    Artinya, data apapun yang ditulis ke situ akan rusak.

en: Something went wrong! - Is mkisofs installed?
target: Ada yg salah! - mkisofs sudah diinstal?

en: Sorry, no floppy drive available
target: Tiada floppy drive tersedia

en: Sorry, we support only 2.4 kernels.
target: Maaf, support hanya untuk kernel 2.4

en: Sound and video playing/editing programs
target: Program untuk memainkan/mengedit suara dan video

en: Sound card
target: Kartu suara

en: Sound configuration
target: Konfigurasi suara

en: Sound trouble shooting
target: Pemecahan masalah suara

en: Soundcard
target: Kartu Suara

en: South Africa
target: Afrika Selatan

en: South Georgia and the South Sandwich Islands
target: Georgia Selatan dan Pulau Sandwich Selatan

en: Spain
target: Spanyol

en: Spanish
target: Spanyol

en: Specify options
target: Tentukan opsi

en: Splash selection
target: Pilihan Splash

en: Standalone Tools
target: Alat Mandiri

en: Standard
target: Standar

en: Standard test page
target: Halaman tes standar

en: Start
target: Mulai

en: Start Server
target: Jalankan Server

en: Start at boot
target: Start saat boot

en: Start sector:
target: Sektor awal:

en: Start when requested
target: Mulai bila diminta

en: Start: sector %s
target: Mulai: sektor %s

en: Started on boot
target: Dijalankan saat boot

en: Starting network...
target: Pemulaian network...

en: Starting the printing system at boot time
target: Inisiasi sistem cetak pada saat boot

en: Starts the X Font Server (this is mandatory for XFree to run).
target: Aktifkan Server Font X (agar XFree dapat berjalan)

en: State
target: Status

en: Statistics
target: Statistik

en: Sticky-bit
target: Sticky-bit (bit-lengket)

en: Store the password for this system in drakbackup configuration.
target: Simpan katasandi sistem di konfigurasi drakbackup.

en: Subnet Mask:
target: Mask Subnet:

en: Sulogin(8) in single user level
target: Sulogin(8) dalam level pengguna single

en: Summary
target: Ringkasan

en: Sun - Mouse
target: Mouse Sun

en: Sunday
target: Minggu

en: Support the OKI 4w and compatible winprinters.
target: Support OKI 4w and winprinter kompatibel.

en: Suppress Fonts Files
target: Sembunyikan File Font

en: Suppress Temporary Files
target: Sembunyikan file temporer

en: Surf the Web with Mozilla or Konqueror, read your mail with Evolution or Kmail, create your documents with OpenOffice.org.
target: Jelajah Web dg Mozilla atau Konqueror, baca mail dg Evolution atau Kmail, buat dokumen dg OpenOffice.org.

en: Svalbard and Jan Mayen Islands
target: Kepulauan Svalbard dan Jan Mayen

en: Swap partition size in MB:
target: Ukuran partisi swap dalam MB:

en: Sweden
target: Swedia

en: Swedish
target: Swedia

en: Swiss (French layout)
target: Swis (layout Prancis)

en: Swiss (German layout)
target: Swis (layout Jerman)

en: Switching from ext2 to ext3
target: Pindah dari ext2 ke ext3

en: Switzerland
target: Swiss

en: Synchronization tool
target: Sinkronisator

en: Syriac
target: Syria

en: Syriac (phonetic)
target: Syiria (fonetik)

en: Syslog is the facility by which many daemons use to log messages
    to various system log files.  It is a good idea to always run syslog.
target: Syslog adalah fasilitas yang digunakan para daemon untuk mencatat
    pesan log sistem di file. Sebaiknya syslog selalu hidup.

en: Syslog reports to console 12
target: Syslog dilaporkan ke konsol 12

en: System
target: Sistem

en: System Options
target: Opsi Sistem

en: System configuration
target: Konfigurasi sistem

en: System installation
target: Instalasi sistem

en: System mode
target: Mode sistem

en: TCP/Socket Printer Options
target: Opsi Printer TCP/Soket

en: TV card
target: Kartu TV

en: TV norm:
target: standar TV :

en: Table
target: Tabel

en: Tajik keyboard
target: Papanketik Tajik

en: Tamil (ISCII-layout)
target: Tamil (layout ISCII)

en: Tamil (Typewriter-layout)
target: Tamil (layout mesintik)

en: Test
target: Tes

en: Test of the configuration
target: Tes konfigurasi

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
target: Halaman test telah dikirim ke printer.
    Akan butuh waktu sebentar untuk mulai mencetak.

en: Test page(s) have been sent to the printer.
    It may take some time before the printer starts.
    Printing status:
    %s
target: Halaman tes telah dikirim ke printer.
    Akan butuh waktu sebentar untuk mulai mencetak.
    Status cetak:
    %s

en: Test pages
target: Halaman tes

en: Testing your connection...
target: Tes koneksi Anda...

en: Thai keyboard
target: Papanketik Muangthai

en: Thailand
target: Muangthai

en: Thank you for choosing Mandrake Linux 9.2
target: Terima kasih memilih Mandrake Linux 9.2

en: The %s is not known by this version of Scannerdrake.
target: %s tak dikenal oleh Scannerdrake versi ini.

en: The %s is not supported by this version of Mandrake Linux.
target: Tiada support utk %s pada Linux Mandrake versi ini.

en: The %s is unsupported
target: %s tak disupport

en: The %s must be configured by printerdrake.
    You can launch printerdrake from the Mandrake Control Center in Hardware section.
target: %s harus dikonfigurasikan oleh printerdrake.
    Anda dapat meluncurkan printerdrake dari Pusat Kontrol Mandrake bagian Hardware.

en: The DHCP end ip
target: IP akhir DHCP

en: The DHCP end range
target: Kisar akhir DHCP

en: The DHCP server will allow other computer to boot using PXE in the given range of address.
    
    The network address is %s using a netmask of %s.
target: Server DHCP memungkinkan boot komputer lain dg PXE dalam kisar alamat yg diberikan.
    
    Alamat jaringan adalah %s dg netmask %s.

en: The DHCP start ip
target: IP awal DHCP

en: The DHCP start range
target: Kisar awal DHCP

en: The DNS Server IP
target: IP Server DNS

en: The DrakX Partitioning wizard found the following solutions:
target: Wizard partisi DrakX menemukan solusi berikut:

en: The FAT resizer is unable to handle your partition, 
    the following error occured: %s
target: Saya tidak dapat mengubah ukuran partisi FAT ini,
    Ada error ini yang terjadi: %s

en: The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.
target: HP LaserJet 1000 perlu firmware di-upload setelah dinyalakan. Downloadlah paket driver Mindows dari situs web HP (firmware di CD printer tak bekerja) dan urailah file firmware (self-extracting '.exe' file) dg utilitas 'unzip' dan carilah file 'sihp1000.img'. Copy file ini ke direktori '/etc/printer'. Di sana ia akan ditemukan oleh skrip uploader otomatis dan di-upload ketika printer dihubungkan dan dinyalakan.

en: The K Desktop Environment, the basic graphical environment with a collection of accompanying tools
target: The K Desktop Environment, lingkungan grafis dasar dg kumpulan tool-tool yang menyertainya

en: The Local Network did not finish with `.0', bailing out.
target: Jaringan Lokal tak berakhiran `.0', keluar.

en: The Mandrake Linux installation is distributed on several CD-ROMs. DrakX
    knows if a selected package is located on another CD-ROM so it will eject
    the current CD and ask you to insert the correct CD as required.
target: Instalasi Mandrake Linux terdiri atas bbrp CDROM. DrakX tahu jika paket
    terpilih berada di CDROM lain dan akan mengeluarkan CD yg ada utk kemudian
    meminta Anda memasukkan CD yg diperlukan.

en: The URL must begin with http:// or https://
target: URL harus dimulai dg http:// atau https://

en: The argument specifies if clients are authorized to connect
    to the X server from the network on the tcp port 6000 or not.
target: Argumen menentukan apakah klien diizinkan berhubungan dg
    server X di port tcp 6000 atau tidak.

en: The auto install can be fully automated if wanted,
    in that case it will take over the hard drive!!
    (this is meant for installing on another box).
    
    You may prefer to replay the installation.
target: Bila Anda mau, auto install bisa dilakukan secara otomatis penuh,
    jadi instalasinya akan mengusai hard drive!
    (ini dimaksudkan untuk menginstall pada komputer lain)
    
    Mungkin Anda perlu mengulangi instalasinya.

en: The backup partition table has not the same size
    Still continue?
target: Backup tabel partisi tidak memiliki ukuran yg sama
    Jalan terus?

en: The change is done, but to be effective you must logout
target: Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku

en: The change is done, do you want to restart the dm service ?
target: Sudah diubah, start ulang servis dm?

en: The classic bug sound tester is to run the following commands:
    
    
    - "lspcidrake -v | fgrep AUDIO" will tell you which driver your card uses
    by default
    
    - "grep sound-slot /etc/modules.conf" will tell you what driver it
    currently uses
    
    - "/sbin/lsmod" will enable you to check if its module (driver) is
    loaded or not
    
    - "/sbin/chkconfig --list sound" and "/sbin/chkconfig --list alsa" will
    tell you if sound and alsa services're configured to be run on
    initlevel 3
    
    - "aumix -q" will tell you if the sound volume is muted or not
    
    - "/sbin/fuser -v /dev/dsp" will tell which program uses the sound card.
target: Tester suara klasik akan menjalankan perintah berikut:
    
    
    - "lspcidrake -v | fgrep AUDIO" akan memberitahu Anda driver mana yg
    dipakai oleh kartu Anda secara default
    
    - "grep sound-slot /etc/modules.conf" memberitahu driver apa yg dipakai
    sekarang
    
    - "/sbin/lsmod" mencek apakah modul (driver) ybs dimuat atau tidak
    
    - "/sbin/chkconfig --list sound" dan "/sbin/chkconfig --list alsa" akan
    memberitahu Anda apakah servis suara dan alsa terkonfigurasi utk dijalankan
    pada initlevel 3
    
    - "aumix -q" memberitahu apakah volume suara dipadamkan atau tidak
    
    - "/sbin/fuser -v /dev/dsp" akan memberitahu program mana yg memakai
    kartu suara.

en: The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on "Manual configuration".
target: Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "Konfigurasi manual".

en: The default lease (in seconds)
target: Lama peminjaman standar (dalam detik)

en: The encryption keys do not match
target: Kunci sandi tak cocok

en: The entered IP is not correct.
target: IP tak benar.

en: The entered host/network IP is not correct.
target: IP host/jaringan tak benar.

en: The floppy has been successfully generated.
    You may now replay your installation.
target: Floppy sukses dibuat. Instalasi bisa direplikasi.

en: The following options can be set to customize your
    system security. If you need an explanation, look at the help tooltip.
target: Opsi berikut dapat diset utk mengatur keamanan sistem Anda.
    Jika Anda butuh penjelasan, carilah di bagian Pertolongan.

en: The following packages are going to be installed
target: Paket berikut akan diinstal

en: The following packages are going to be removed
target: Paket berikut akan dihapus

en: The following packages need to be installed:
target: Paket berikut perlu diinstal:

en: The following packages will be removed to allow upgrading your system: %s
    
    
    Do you really want to remove these packages?
target: Paket berikut akan dihapus agar sistem Anda dapat di-upgrade: %s
    
    
    Benarkah Anda ingin menghapus paket tersebut?

en: The following printer
    
    %s%s
    are directly connected to your system
target: Printer berikut
    
    %s%s
    terhubung langsung dg sistem Anda

en: The following printer
    
    %s%s
    is directly connected to your system
target: Printer berikut
    
    %s%s
    terhubung langsung dg sistem Anda

en: The following printer was auto-detected.
target: Printer berikut terdeteksi otomatis.

en: The following printers
    
    %s%s
    are directly connected to your system
target: Printer berikut
    
    %s%s
    terhubung langsung dg sistem Anda

en: The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it.
target: Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi setting; membuatnya printer default; atau melihat info tentangnya.

en: The following scanner
    
    %s
    is available on your system.
target: Scanner berikut
    
    %s
    tersedia di sistem Anda.

en: The following scanners
    
    %s
    are available on your system.
target: Scanner berikut
    
    %s
    tersedia di sistem Anda.

en: The highlighted entry will be booted automatically in %d seconds.
target: Entri yang dipilih akan diboot secara otomatis dalam %d detik.

en: The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.
target: Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, bukan printer di mesin remote atau kotak server cetak. Hubungkan printer Anda ke port lokal atau konfigurasikan di mesin yang terhubung dengannya.

en: The internal domain name
target: Nama domain internal

en: The internet superserver daemon (commonly called inetd) starts a
    variety of other internet services as needed. It is responsible for starting
    many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
    all of the services it is responsible for.
target: daemon superserver internet (biasa dipanggil inetd) bertugas untuk
    menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab
    atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan
    inetd berarti menonaktifkan semua servis-servis tadi.

en: The maximum lease (in seconds)
target: Lama peminjaman maksimum (dalam detik)

en: The model is correct
target: Model sudah benar

en: The most common way to connect with adsl is pppoe.
    Some connections use pptp, a few use dhcp.
    If you don't know, choose 'use pppoe'
target: Cara yang umum untuk terkoneksi ke adsl adalah dengan menggunakan pppoe.
    Namun ada juga yang menggunakan pptp, dan ada yang pakai dhcp saja.
    Bila ragu, pilih saja 'gunakan pppoe'

en: The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.
target: Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware Anda, lalu coba konfigurasikan printer remote Anda lagi.

en: The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section "Network & Internet"/"Connection", and afterwards set up the printer, also using the Mandrake Control Center, section "Hardware"/"Printer"
target: Konfigurasi network yang dilakukan saat instalasi kini tak dapat jalan. Tolong cek apakah network dapat diakses setelah sistem diboot dan betulkan konfigurasi dengan Pusat Kontrol Mandrake, bagian "Network & Internet"/"Koneksi", lalu set printer juga dg Pusat Kontrol Mandrake, bagian "Hardware"/"Printer"

en: The network needs to be restarted. Do you want to restart it ?
target: Jaringan perlu dijalankan ulang. Anda ingin restart?

en: The official MandrakeSoft Store
target: Toko resmi MandrakeSoft

en: The old "%s" driver is blacklisted.
    
    It has been reported to oops the kernel on unloading.
    
    The new "%s" driver'll only be used on next bootstrap.
target: Driver "%s" lama di-blacklist.
    
    Ia merusak kernel saat pembongkaran (unload).
    
    Driver baru "%s" akan digunakan pada boot berikut.

en: The package %s is needed. Install it?
target: Perlu paket %s. Anda ingin instal?

en: The package %s needs to be installed. Do you want to install it?
target: Paket %s perlu diupgrade. Anda ingin instal?

en: The passwords do not match
target: Katasandi tidak sama

en: The per-user sharing uses the group "fileshare". 
    You can use userdrake to add a user to this group.
target: Sharing tiap pengguna menggunakan grup "fileshare". 
    Anda dapat memakai userdrake utk menambah pengguna di grup ini.

en: The port number should be an integer!
target: Nomor port harus berupa bilangan bulat

en: The portmapper manages RPC connections, which are used by
    protocols such as NFS and NIS. The portmap server must be running on machines
    which act as servers for protocols which make use of the RPC mechanism.
target: Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti
    NFS dan NIS. Server portmap harus jalan di mesin yang bertindak sebagai
    server untuk protokol yang menggunakan mekanisme RPC.

en: The printer "%s" already exists,
    do you really want to overwrite its configuration?
target: Sudah ada printer "%s", Anda benar ingin menindih konfigurasinya?

en: The printer "%s" is set as the default printer now.
target: Printer "%s" kini diset sbg printer standar.

en: The printer "%s" was successfully added to Star Office/OpenOffice.org/GIMP.
target: Printer "%s" sukses ditambahkan ke Star Office/OpenOffice.org/GIMP.

en: The printer "%s" was successfully removed from Star Office/OpenOffice.org/GIMP.
target: Printer "%s" sukses dihapus dari Star Office/OpenOffice.org/GIMP.

en: The printers on this machine are available to other computers
target: Printer di mesin ini dapat dipakai oleh komputer lain

en: The printing system (%s) will not be started automatically when the machine is booted.
    
    It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
    
    Do you want to have the automatic starting of the printing system turned on again?
target: Sistem cetak (%s) takkan otomatis jalan saat mesin diboot.
    
    Sebabnya mungkin auto-start dimatikan sbg implikasi level sekuriti tinggi, karena sistem cetak potensial diserang.
    
    Anda ingin auto-start sistem cetak dinyalakan lagi?

en: The routed daemon allows for automatic IP router table updated via
    the RIP protocol. While RIP is widely used on small networks, more complex
    routing protocols are needed for complex networks.
target: Daemon routed digunakan untuk update tabel routing IP otomatis liwat
    protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya
    maka protokol routing yang canggih pun semakin dibutuhkan.

en: The rstat protocol allows users on a network to retrieve
    performance metrics for any machine on that network.
target: Protokol rstat digunakan pada jaringan untuk mengambil
    ukuran kinerja sistem di network.

en: The rusers protocol allows users on a network to identify who is
    logged in on other responding machines.
target: Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa
    yang lagi login di jaringan.

en: The rwho protocol lets remote users get a list of all of the users
    logged into a machine running the rwho daemon (similiar to finger).
target: Protokol rwho digunakan untuk melihat daftar pengguna yang sedang login
    di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger).

en: The scanners on this machine are available to other computers
target: Scanner di mesin ini dapat dipakai oleh komputer lain

en: The setup has already been done, and it's currently enabled.
target: Konfigurasi telah selesai.Namun sekarang sudah aktif.

en: The setup has already been done, but it's currently disabled.
target: Konfigurasi telah seleasi.Namun sekarang masih dimatikan.

en: The setup of Internet Connection Sharing has already been done.
    It's currently enabled.
    
    What would you like to do?
target: Konfigurasi Internet Connection Sharing telah seleasi.
    Namun sekarang sudah aktif.
    
    Apa yang ingin Anda lakukan?

en: The setup of Internet connection sharing has already been done.
    It's currently disabled.
    
    What would you like to do?
target: Konfigurasi Sharing Koneksi Internet telah seleasi.
    Namun sekarang masih dimatikan.
    
    Apa yang ingin Anda lakukan?

en: The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community.
target: Sukses MandrakeSoft berdasar prinsip Perangkat Lunak Bebas. OS baru Anda adalah hasil kerja kolaborasi Komunitas Linux seluruh dunia

en: The system doesn't seem to be connected to the Internet.
    Try to reconfigure your connection.
target: Sistem ini tampaknya tak terhubung ke Internet.
    Cobalah konfigurasikan ulang koneksi Anda.

en: The system is now connected to the Internet.
target: Sistem ini kini terhubung ke Internet.

en: The two critical parameters are the vertical refresh rate, which is the rate
    at which the whole screen is refreshed, and most importantly the horizontal
    sync rate, which is the rate at which scanlines are displayed.
    
    It is VERY IMPORTANT that you do not specify a monitor type with a sync range
    that is beyond the capabilities of your monitor: you may damage your monitor.
     If in doubt, choose a conservative setting.
target: Ada dua parameter penting, yaitu laju refresh vertikal, yaitu laju
    kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah
    laju sync horisontal, yaitu laju kecepatan saat menanyangkan scan line.
    
    Anda TIDAK BOLEH mengisi parameter yang tak dapat diimbangi oleh kemampuan
    monitor Anda, karena ia akan rusak berat.
    Jika ragu, gunakan setting yang umum.

en: The user name is too long
target: Nama pengguna terlalu panjang

en: The user name must contain only lower cased letters, numbers, `-' and `_'
target: Nama pengguna hanya boleh terdiri dari huruf, angka, `-' dan `_'

en: Theme installation failed!
target: Instalasi tema gagal!

en: Theme name
target: Nama tema

en: Themes
target: Tema

en: There are already some restrictions, and more automatic checks are run every night.
target: Sudah ada beberapa batasan, dan beberapa pengecekan otomatis berjalan tiap malam.

en: There are no printers found which are directly connected to your machine
target: Tiada printer yg ditemukan terhubung langsung ke mesin Anda

en: There are no scanners found which are available on your system.
target: Tidak ada scanner yg dapat dipakai sistem Anda.

en: There is already a partition with mount point %s
target: Partisi dengan titik mount %s sudah ada

en: There is no FAT partition to resize (or not enough space left)
target: Tiada partisi FAT untuk diubah ukurannya (atau tak ada cukup ruangan)

en: There is no FAT partition to use as loopback (or not enough space left)
target: Tiada partisi FAT utk digunakan sbg loopback (atau tiada ruang cukup)

en: There is no existing partition to use
target: Tidak ada partisi yang bisa digunakan

en: There is no medium or it is write-protected for device %s.
    Please insert one.
target: Media di device %s tidak ada atau write-protected.
    Masukkan satu.

en: There is only one configured network adapter on your system:
    
    %s
    
    I am about to setup your Local Area Network with that adapter.
target: Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:
    
    %s
    
    Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?

en: There was an error installing packages:
target: Ada error saat instalasi paket:

en: There was an error ordering packages:
target: Ada error mengurutkan paket:

en: There was an error while scanning for TV channels
target: Ada error saat men-scan kanal TV

en: There's no free driver for your sound card (%s), but there's a proprietary driver at "%s".
target: Tak ada driver gratis utk kartu suara Anda (%s), tapi ada driver yg cocok di "%s"

en: There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses "%s"
target: Tak diketahui adanya driver alternatif OSS/ALSA utk kartu suara Anda (%s) yg kini memakai "%s"

en: There's no known driver for your sound card (%s)
target: Tak diketahui adanya driver utk kartu suara Anda (%s)

en: These are the machines and networks on which the locally connected printer(s) should be available:
target: Mesin dan jaringan yg printer lokalnya dapat dipakai:

en: These are the machines from which the scanners should be used:
target: Mesin yg scanner-nya akan dipakai:

en: These are the machines on which the locally connected scanner(s) should be available:
target: Ini adalah mesin yg scanner lokalnya akan dibuat agar dapat dipakai:

en: These commands you can also use in the "Printing command" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
target: Komando ini dapat Anda pakai dalam kotak "Perintah cetak" dialog cetak di banyak aplikasi, tapi jangan berikan nama file di sini karena file yang dicetak akan diberikan oleh aplikasi.

en: These options can backup and restore all files in your /etc directory.
target: Opsi ini memungkinkan backup / restorasi semua file di direktori /etc.

en: Thin Client
target: Klien Thin

en: This command you can also use in the "Printing command" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
target: Perintah ini digunakan di kotak "Perintah cetak" di dialog cetak beberapa aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan diberikan oleh aplikasi.

en: This directory should remain within the root filesystem
target: Direktori ini harus ada di filesystem root

en: This encryption key is too simple (must be at least %d characters long)
target: Katasandi ini terlalu mudah (harus paling tidak %d karakter)

en: This floppy is not FAT formatted
target: Disket ini tak diformat dengan sistem FAT

en: This host is already in the list, it cannot be added again.
target: Host ini sudah terdaftar, tak dapat ditambahkan lagi.

en: This host/network is already in the list, it cannot be added again.
target: Host/jaringan ini sudah terdaftar, tak dapat ditambahkan lagi.

en: This interface has not been configured yet.
    Launch the configuration wizard in the main window
target: Antarmuka ini belum dikonfigurasikan.
    Luncurkan dukun konfigurasi di window utama

en: This is a mandatory package, it can't be unselected
target: Paket ini harus diinstal, tak bisa dibuang

en: This is similar to the previous level, but the system is entirely closed and security features are at their maximum.
target: Sama dengan level sebelumnya, tapi sistem sepenuhnya ditutup.
    Fitur sekuriti maksimum.

en: This is the standard security recommended for a computer that will be used to connect to the Internet as a client.
target: Ini adalah sekuriti standar, dianjurkan untuk komputer yang akan
    terkoneksi ke Internet sebagai klien.

en: This label is already used
target: Label ini sudah dipakai

en: This level is to be used with care. It makes your system more easy to use,
    but very sensitive. It must not be used for a machine connected to others
    or to the Internet. There is no password access.
target: Level ini harus digunakan hati-hati. Ia akan membuat sistem Anda akan mudah
    digunakan, tapi sangat sensitif: mesin ini tidak boleh digunakan untuk
    mesin yang terhubung ke mesin lain atau ke Internet. Tidak akan ada
    akses katasandi.

en: This machine
target: Mesin ini

en: This may take a moment to erase the media.
target: Perlu waktu untuk menghapus media.

en: This may take a moment to generate the keys.
target: Perlu waktu untuk membuat kunci

en: This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used.
target: Opsi ini akan menyimpan file yg telah berubah, menurut mode yg digunakan (incremental atau differential).

en: This package loads the selected keyboard map as set in
    /etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
    You should leave this enabled for most machines.
target: Paket ini akan memuat map papanketik yang dipilih di file
    /etc/sysconfig/keyboard. Mapnya dapat dipilih dari utility kbdconfig.
    Biarkan aktif!

en: This package must be upgraded.
    Are you sure you want to deselect it?
target: Paket ini mesti diupgrade
    Benar tak mau dipilih?

en: This partition can't be used for loopback
target: Partisi ini tak bisa dipakai sebagai loopback

en: This partition is not resizeable
target: Ukuran partisi ini tidak dapat diubah

en: This password is too short (it must be at least %d characters long)
target: Katasandinya terlalu mudah (harus paling tidak %d karakter)

en: This password is too simple
target: Katasandi ini terlalu sederhana

en: This product is available on the MandrakeStore Web site.
target: Produk ini tersedia di situs MandrakeStore

en: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
target: Program ini gratis; Anda dapat menyebar ulang dan/atau mengubahnya
    sesuai Lisensi Publik Umum GNU dari Free Software Foundation; baik
    versi 2, atau yang lebih baru.
    
    Program ini disebar agar dapat digunakan, tapi TANPA GARANSI APAPUN; bahkan
    tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN
    TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.
    
    Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program
    ini; jika tidak, tulis ke Free Software Foundation, Inc., 
    59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en: This server is already in the list, it cannot be added again.
target: Server ini sudah terdaftar, tak dapat ditambahkan lagi.

en: This theme does not yet have a bootsplash in %s !
target: Tema ini belum punya bootsplash di %s !

en: This user name has already been added
target: Pengguna ini sudah ada sebelumnya

en: This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -scanbus' would also show you the device number.
target: Ini menggunakan syntax seperti program baris perintah 'cdrecord'. 'cdrecord -scanbus' juga akan menunjukkan nomor device.

en: This will take a few minutes.
target: Butuh beberapa menit.

en: Thursday
target: Kamis

en: Time remaining
target: Sisa waktu

en: Timezone
target: Zonawaktu

en: Title
target: Judul

en: To activate the mouse,
target: Untuk mengaktifkan mouse,

en: To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the "Drivers" link. Then choose your model and afterwards "Linux" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with "lexmarkmaintain" and adjust the head alignment settings with this program.
target: Agar dapat mencetak dg Lexmark inkjet dan konfigurasi ini, Anda perlu driver printer inkjet yg disediakan Lexmark (http://www.lexmark.com/). Klik link "Drivers". Pilih model Anda lalu sistem operasi "Linux". Driver disediakan berupa paket RPM atau shell script dg instalasi grafis interaktif. Anda tak perlu melakukan konfigurasi via frontend grafis ini. Batalkan langsung setelah persetujuan lisensi. Lalu cetak halaman printhead alignment dg "lexmarkmaintain" dan cocokkan setting head alignment dg program ini.

en: To ensure data integrity after resizing the partition(s), 
    filesystem checks will be run on your next boot into Windows(TM)
target: Utk memastikan integritas data setelah ukuran partisi berubah,
    cek sistem file akan dilakukan pada boot berikut dalam Mindows(TM)

en: To get a list of the options available for the current printer click on the "Print option list" button.
target: Untuk mendapat daftar opsi printer klik "Daftar opsi cetak".

en: To get access to printers on remote CUPS servers in your local network you only need to turn on the "Automatically find available printers on remote machines" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the "Remote printers" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s).
target: Utk mengakses printer di server CUPS dalam jaringan lokal Anda hanya perlu
    menyalakan opsi "Cari printer di mesin lain secara otomatis"; server CUPS
    secara otomatis memberitahu mesin Anda ttg printer mereka. Semua printer yg
    kini dikenal oleh mesin Anda terdaftar di bagian "Printer remote" window
    utama Printerdrake. Jika server CUPS Anda tak berada di jaringan lokal,
    masukkan alamat IP (dan nomor port bila perlu) utk mendapat info printer
    dari server.

en: To have more partitions, please delete one to be able to create an extended partition
target: Untuk menambahkan partisi, hapus satu agar dapat membuat partisi extended

en: To know about the options available for the current printer read either the list shown below or click on the "Print option list" button.%s%s%s
target: Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol "Daftar opsi cetak".%s%s%s

en: To modify and to create in different languages such as Perl, Python, C and C++ has never been so easy thanks to GNU gcc 3 and the best Open Source development environments.
target: Pemrograman dg aneka bahasa spt Perl, Python, C and C++ tak pernah semudah saat ini berkat GNU gcc 3 dan lingkungan pengembangan Open Source terbaik.

en: To print a file from the command line (terminal window) use the command "%s <file>" or "%s <file>".
target: Utk mencetak file dari baris komando (jendela terminal) gunakan komando "%s <file>" atau "%s <file>".

en: To print a file from the command line (terminal window) use the command "%s <file>".
target: Utk mencetak file dari baris komando (window terminal) gunakan perintah "%s <file>".

en: To print a file from the command line (terminal window) you can either use the command "%s <file>" or a graphical printing tool: "xpp <file>" or "kprinter <file>". The graphical tools allow you to choose the printer and to modify the option settings easily.
target: Utk mencetak file dari baris perintah (window terminal) pakailah komando komando "%s <file>" atau alat cetak grafis: "xpp <file>" atau "kprinter <file>". Alat grafis memungkinkan Anda memilih printer dan memodifikasi setting dengan mudah.

en: To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password.
target: Jika ingin mencetak pakai printer NetWare, berikan nama server printer NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer yang ingin digunakan beserta nama pengguna dan katasandinya.

en: To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.
target: Untuk mencetak ke printer SMB, berikan nama host SMB (Catatan! Mungkin berbeda dengan nama host TCP/IP) dan mungkin alamat IP server printer, nama share printer yang ingin Anda akses, juga nama pengguna, katasandi, dan info workgroup.

en: To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.
target: Untuk mencetak ke printer TCP/socket, berikan nama host atau IP printer dan nomor portnya (default 9100). Nomor port server HP JetDirect biasanya 9100, server lain mungkin bervariasi. Lihat manual perangkat keras Anda.

en: To share your own knowledge and help build Linux software, join our discussion forums on our "Community" webpages.
target: Untuk berbagi pengetahuan dan membantu membangun peralatan Linux, mari bergabung dalam forum diskusi yg tertera di halaman web "Komunitas" kami

en: To submit a bug report, click on the button report.
    This will open  a web browser window on %s
     where you'll find a form to fill in.  The information displayed above will be 
    transferred to that server.
target: Klik tombol utk mengirim laporan kutu.
    Ini akan membuka window browser web di %s
    dan akan ada formulir untuk diisi. Info yang tampil di atas akan
    ditransfer ke server tsb.

en: To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server.
target: Untuk memakai printer lpd remote, berikan nama host
    server printer dan nama printer di server tsb.

en: To use this saved packages selection, boot installation with ``linux defcfg=floppy''
target: Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah instalasi dengan pilihan ''linux defcfg=floppy''

en: Toggle between flat and group sorted
target: Togel tampilan rata dan terurut grupnya

en: Toggle between normal/expert mode
target: Ubah ke modus normal/ahli

en: Toggle to expert mode
target: Ubah ke modus ahli

en: Toggle to normal mode
target: Ubah ke modus normal

en: Tools to ease the configuration of your computer
target: Alat untuk memudahkan konfigurasi komputer.

en: Total Progress
target: Total Kemajuan

en: Total size: %d / %d MB
target: Ukuran total: %d / %d MB

en: Track network card id (useful for laptops)
target: Lacak ID kartu network (berguna di laptop)

en: Transfer printer configuration
target: Transfer konfigurasi printer

en: Transfer successful
    You may want to verify you can login to the server with:
    
    ssh -i %s %s\@%s
    
    without being prompted for a password.
target: Transfer sukses
    Anda mungkin ingin mengecek Anda dapat login ke server dg:
    
    ssh -i %s %s\@%s
    
    tanpa ditanyai katasandi.

en: Transferring %s...
target: Pemindahan %s ...

en: Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!
target: Jadikan mesin Anda server perkasa dengan hanya beberapa klik mouse: server Web, email, firewall, router, server file dan cetak, ...

en: Trinidad and Tobago
target: Trinidad dan Tobago

en: True Type fonts installation
target: Instalasi font True Tupe

en: True Type install done
target: Instalasi True Type selesai

en: Truly minimal install
target: Instalasi paling minimal

en: Truly minimal install (especially no urpmi)
target: Benar-benar instalasi minim (khususnya tanpa urpmi)

en: Trying to rescue partition table
target: Sedang mencoba menyelamatkan tabel partisi

en: Tuesday
target: Selasa

en: Tuner type:
target: Tipe tuner :

en: Turkey
target: Turki

en: Turkish (modern "Q" model)
target: Turki (model "Q" modern)

en: Turkish (traditional "F" model)
target: Turki (model "F" tradisional)

en: Turks and Caicos Islands
target: Kepulauan Turks dan Caicos

en: Turn your computer into a reliable server
target: Jadikan mesin Anda server yang handal

en: Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine.
target: Nyalakan ini HANYA BILA Anda benar-benar perlu mencetak teks bahasa Jepang, jika ini aktif Anda tak dapat mencetak huruf aksen font latin dan takkan dapat menyetel margin, ukuran huruf, dsb. Setting ini hanya berlaku bagi printer yg didefinisikan di mesin ini. Jika ingin mencetak teks Jepang di printer mesin lain, aktifkan fungsi ini di mesin remote tsb.

en: Tvcard
target: Kartu TV

en: Type
target: Tipe

en: Type of install
target: Tipe instalasi

en: Type:
target: Tipe:

en: Type:
target: Tipe:

en: UK keyboard
target: Keyboard UK

en: URL should begin with 'ftp:' or 'http:'
target: Url harus berawalan 'ftp:' atau  'http:'

en: US keyboard
target: Keyboard US

en: US keyboard (international)
target: Keyboard US (internasional)

en: USA (broadcast)
target: AS (siaran)

en: USA (cable)
target: AS (kabel)

en: USA (cable-hrc)
target: AS (kabel-hrc)

en: USB controllers
target: Pengontrol USB

en: USB printer #%s
target: printer USB #%s

en: Ukraine
target: Ukraina

en: Ukrainian
target: Ukraina

en: Unable to contact mirror %s
target: Gagal hubungi mirror %s

en: Unable to fork: %s
target: Fork gagal: %s

en: Unable to start live upgrade !!!
target: Gagal memulai upgrade live !!!

en: Under Devel ... please wait.
target: Sedang dibangun ... tunggu.

en: Undo
target: Kembali

en: Uninstall Fonts
target: Buang Font

en: United Arab Emirates
target: Uni Emirat Arab

en: United Kingdom
target: Inggris

en: United States
target: Amerika Serikat

en: United States Minor Outlying Islands
target: Amerika Serikat, kepulauan Luar Minor

en: Unknown
target: Tak dikenal

en: Unknown Model
target: Model Tak Dikenal

en: Unknown driver
target: Driver tak dikenal

en: Unknown model
target: Model tak dikenal

en: Unknown/Others
target: Tak dikenal/Lain-lain

en: Unknown|CPH05X (bt878) [many vendors]
target: Takdikenal|CPH05X (bt878) [banyak pembuat]

en: Unknown|CPH06X (bt878) [many vendors]
target: Takdikenal|CPH06X (bt878) [banyak vendors]

en: Unknown|Generic
target: Takdikenal|Generik

en: Unsafe
target: Tak aman

en: Unselect fonts installed
target: Tak pilih font yg sudah diinstal

en: Unselected All
target: Semua tak dipilih

en: Up
target: Naik

en: Updating package selection
target: Update pilihan paket

en: Usage of remote scanners
target: Pemakaian scanner remote

en: Use .backupignore files
target: Pakai file .backupignore

en: Use CD-R/DVD-R to backup
target: Pakai CD/DVDROM utk backup

en: Use Differential Backups
target: Gunakan Backup Diferensial

en: Use Expect for SSH
target: Pakai Expect utk SSH

en: Use Hard Disk to backup
target: Pakai Hard Disk utk backup

en: Use Incremental Backups
target: Pakai Backup Incremental

en: Use Incremental/Differential Backups  (do not replace old backups)
target: Pakai Backup Incremental/Diferensial (tak menghapus backup lama)

en: Use Unicode by default
target: Pakai Unicode sebagai standar

en: Use Xinerama extension
target: Gunakan ekstensi Xinerama

en: Use ``%s'' instead
target: Gunakan ``%s'' saja

en: Use ``Unmount'' first
target: Gunakan ``unmount'' terlebih dahulu

en: Use auto detection
target: Gunakan deteksi otomatis

en: Use daemon
target: Pakai daemon

en: Use existing partition
target: Pakai partisi yang sudah ada

en: Use existing partitions
target: Pakai partisi yang sudah ada

en: Use fdisk
target: gunakan fdisk

en: Use for loopback
target: digunakan untuk loopback

en: Use free space
target: Pakai ruang kosong

en: Use group id for execution
target: Gunakan id grup utk eksekusi

en: Use libsafe for servers
target: Gunakan libsafe utk server

en: Use network connection to backup
target: Pakai koneksi jaringan utk backup

en: Use owner id for execution
target: Gunakan id pemilik utk eksekusi

en: Use password to authenticate users
target: Pakai katasandi utk pembuktian pengguna

en: Use password to authenticate users.
target: Pakai katasandi utk membuktikan keaslian pengguna.

en: Use quota for backup files.
target: Pakai quota utk file backup.

en: Use scanners on remote computers
target: Pakai scanner di komputer remote

en: Use tape to backup
target: Gunakan pita utk backup

en: Use the %c and %c keys for selecting which entry is highlighted.
target: Gunakan tombol %c dan %c untuk memilih entri yang disorot

en: Use the Windows partition for loopback
target: Gunakan partisi Mindows untuk loopback

en: Use the free space on the Windows partition
target: Pakai ruang kosong pada partisi windows

en: Use the scanners on hosts:
target: Pakai scanner di host:

en: Used for directory:
     only owner of directory or file in this directory can delete it
target: Digunakan utk direktori:
     hanya pemilik direktori atau file dalam direktori ini yg dapat menghapusnya

en: Useless without Terminal Server
target: Tak berguna tanpa Server Terminal

en: User
target: Pengguna

en: User :
target: Pengguna :

en: User list to restore (only the most recent date per user is important)
target: Daftar pengguna restorasi (hanya tanggal terakhir per pengguna yg penting)

en: User name
target: Nama pengguna

en: User umask
target: Umask pengguna

en: Username
target: Nama pengguna

en: Username required
target: Nama pengguna dibutuhkan

en: Users
target: Pengguna

en: Valid user list changed, rewriting config file.
target: Daftar pengguna berubah, file konfigurasi ditulis ulang.

en: Various
target: Macam-macam

en: Vatican
target: Vatikan

en: Vendor
target: Pembuat

en: Verify checksum of the suid/sgid files
target: Verifikasi checksum file suid/sgid

en: Vertical refresh rate
target: Laju refresh vertikal

en: Video mode
target: Mode video

en: Videocard
target: Kartu Video

en: Vietnamese "numeric row" QWERTY
target: Vietnam "numeric row" QWERTY

en: View Backup Configuration.
target: Lihat Konfigurasi Backup.

en: View Configuration
target: Lihat Konfigurasi

en: View Last Log
target: Lihat Log Terakhir

en: Virgin Islands (British)
target: Kepulauan Virgin (Inggris)

en: Virgin Islands (U.S.)
target: Virgin Islands (Amerika)

en: WARNING
target: PERINGATAN

en: WARNING: this device has been previously configured to connect to the Internet.
    Simply accept to keep this device configured.
    Modifying the fields below will override this configuration.
target: AWAS: device ini sebelumnya telah dikonfigurasikan untuk terhubung ke Internet.
    Tekan OK untuk tetap menggunakan konfigurasi lama.
    Bila ingin menggantinya, silakan ganti isi pada kolom-kolom di konfigurasi ini.

en: Wait please
target: Tunggu

en: Wait please, testing your connection...
target: Tes koneksi Anda...

en: Wallis and Futuna
target: Wallis dan Futuna

en: Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!
target: Ingin tahu lebih tentang komunitas Open Source? Gabung dunia Perangkat Lunak Bebas!

en: Warning
target: Awas

en: Warning : IP address %s is usually reserved !
target: Awas: alamat IP %s biasanya sudah dipesan !

en: Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation.
target: Awas! Sudah ada konfigurasi firewall. Anda perlu mengecek dan membetulkan secara manual setelah instalasi.

en: Warning, another Internet connection has been detected, maybe using your network
target: Awas, koneksi Internet lain terdeteksi, mungkin memakai jaringan Anda

en: Warning, another internet connection has been detected, maybe using your network
target: Awas, koneksi internet lain terdeteksi, mungkin memakai jaringan Anda

en: Warning, the network adapter (%s) is already configured.
    
    Do you want an automatic re-configuration?
    
    You can do it manually but you need to know what you're doing.
target: Awas, adaptor network (%s) telah terkonfigurasikan.
    
    Anda ingin konfigurasi ulang otomatis?
    
    Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan.

en: Warning: testing this graphic card may freeze your computer
target: Awas: pengujian kartu grafis ini dapat membekukan komputer

en: Web Server
target: Server Web

en: Web/FTP
target: Server, Web/FTP

en: WebDAV is a protocol that allows you to mount a web server's directory
    locally, and treat it like a local filesystem (provided the web server is
    configured as a WebDAV server). If you would like to add WebDAV mount
    points, select "New".
target: WebDAV adalah protokol yg memungkinkan Anda me-mount direktori server web
    secara lokal, dan memperlakukannya sbg sistem file lokal (asal server web
    dikonfigurasikan sbg server WebDAV). Jika Anda ingin menambah titik mount
    WebDav, pilih "Baru".

en: WebDAV remote site already in sync!
target: Situs remote WebDAV telah sinkron!

en: WebDAV transfer failed!
target: Transfer WebDAV gagal!

en: Webmin Service
target: Servis Webmin

en: Wednesday
target: Rabu

en: Welcome To Crackers
target: Selamat Datang di Crackers

en: Welcome to %s
target: Selamat Datang di %s

en: Welcome to %s the operating system chooser!
    
    Choose an operating system from the list above or
    wait %d seconds for default boot.
target: Selamat datang di pemilih sistem operasi %s!
    
    Pilih sistem operasi pada daftar di atas atau tunggu %d detik untuk boot default.

en: Welcome to GRUB the operating system chooser!
target: Selamat datang di sang pemilih sistem operasi, GRUB

en: Welcome to The Network Configuration Wizard.
    
    We are about to configure your internet/network connection.
    If you don't want to use the auto detection, deselect the checkbox.
target: Selamat Datang di Wizard Koneksi Jaringan
    
    Sekarang kita akan mengkonfigurasikan internet/jaringan.
    Bila Anda tidak mau menggunakan deteksi otomatis, mohon untuk tidak memilih checkbox.

en: Welcome to the Internet Connection Sharing utility!
    
    %s
    
    Click on Configure to launch the setup wizard.
target: Selamat datang di utiliti Internet Connection Sharing!
    
    %s
    
    Klik Konfigurasikan untuk mulai.

en: Welcome to the Open Source world.
target: Selamat datang di dunia Source Terbuka

en: Welcome to the mail configuration utility.
    
    Here, you'll be able to set up the alert system.
target: Selamat datang di konfigurator mail.
    
    Anda dapat mengeset sistem peringatan.

en: West Europe
target: Eropa Barat

en: Western Sahara
target: Sahara Barat

en: What
target: Apa

en: What kind is your ISDN connection?
target: Tipe koneksi ISDN apa yang Anda miliki?

en: What kind of card do you have?
target: Tipe card mana yang Anda punya?

en: What norm is your TV using?
target: Norm apa yg digunakan TV Anda?

en: What type of partitioning?
target: Tipe partisi apa yang hendak digunakan?

en: When
target: Kapan

en: When checked, owner and group won't be changed
target: Jika dipilih, pemilik dan grup takkan diubah

en: When this option is turned on, on every startup of CUPS it is automatically made sure that
    
    - if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS
    
    - if /etc/cups/cupsd.conf is missing, it will be created
    
    - when printer information is broadcasted, it does not contain "localhost" as the server name.
    
    If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points.
target: Jika opsi ini dipilih, pada tiap penyalaan CUPS akan dipastikan bahwa
    
    - jika LPD/LPRng terinstal, /etc/printcap takkan ditindih oleh CUPS
    
    - jika /etc/cups/cupsd.conf hilang, akan dibuatkan
    
    - saat info printer disiarkan, tidak ada nama server "localhost"<.
    
    Jika tindakan ini menimbulkan masalah, matikan opsi ini, tapi Anda harus
    memperhatikan poin-poin ini.

en: Where
target: Mana

en: Where do you want to install the bootloader?
target: Bootloader akan diinstal di mana?

en: Where do you want to mount %s?
target: %s akan dimount ke mana?

en: Where do you want to mount device %s?
target: Mount device %s akan dimount ke mana?

en: Where do you want to mount the loopback file %s?
target: File loopback %s akan di-mount ke mana?

en: Whether the FPU has an irq vector
target: Apakah FPU punya vektor irq

en: Which %s driver should I try?
target: Driver %s mana yang harus saya coba?

en: Which configuration of XFree do you want to have?
target: Konfigurasi XFree mana yang Anda inginkan?

en: Which dhcp client do you want to use ? (default is dhcp-client)
target: Klien dhcp mana yang ingin Anda pakai? (standarnya dhcp-client)

en: Which disk do you want to move it to?
target: Disk mana yang hendak dipindah?

en: Which filesystem do you want?
target: Filesystem apa yang Anda inginkan?

en: Which is your timezone?
target: Pilih zonawaktu Anda

en: Which of the following is your ISDN card?
target: Yang mana kartu ISDN Anda?

en: Which partition do you want to resize?
target: partisi mana yang mau Anda ubah ukurannya?

en: Which partition do you want to use for Linux4Win?
target: Partisi mana yang hendak dipakai oleh Linux4Win?

en: Which printer model do you have?
target: Anda punya model printer mana?

en: Which printing system (spooler) do you want to use?
target: Sistem (spooler) printer mana yang ingin digunakan?

en: Which protocol do you want to use?
target: Protokol apa yang ingin Anda gunakan?

en: Which sector do you want to move it to?
target: Sektor mana yang hendak dipindah

en: Which services would you like to allow the Internet to connect to?
target: Layanan apa yg Anda suka untuk akses dari Internet?

en: Which size do you want to keep for Windows on
target: Tentukan ukuran untuk menyimpan Mindows

en: Which type of entry do you want to add?
target: Tipe entri mana yang hendak ditambahkan?

en: Which username
target: Nama pengguna yang mana

en: Windows
target: Mindows

en: Windows (FAT32)
target: Mindows (FAT32)

en: Windows Domain
target: Domain Mindows

en: Windows Migration tool
target: Alat Migrasi Mindows

en: Winmodem connection
target: Koneksi winmodem

en: With X
target: Dengan X

en: With basic documentation
target: Dengan dokumentasi dasar

en: With basic documentation (recommended!)
target: Dengan dokumentasi dasar (disarankan!)

en: With this option you will be able to restore any version
     of your /etc directory.
target: Dengan opsi ini Anda dapat menyimpan ulang semua versi direktori /etc.

en: With this security level, the use of this system as a server becomes possible.
    The security is now high enough to use the system as a server which can accept
    connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level.
target: Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.
    Sekuriti kini cukup tinggi untuk dapat melayani koneksi banyak klien.
    Jika mesin Anda hanya berfungsi sebagai klien, pilihlah level lebih rendah.

en: Wizard
target: Dukun

en: Wizard Configuration
target: Konfigurasi Dukun

en: Workgroup
target: Grupkerja

en: Workstation
target: Stasiunkerja

en: Would you like to allow users to share some of their directories?
    Allowing this will permit users to simply click on "Share" in konqueror and nautilus.
    
    "Custom" permit a per-user granularity.
target: Bolehkah pengguna mengekspor direktori di home mereka?
    Jika diizinkan, pengguna akan dapat meng-klik "Share" di konqueror and nautilus.
    
    "Custom" memungkinkan tuning masing-masing pengguna.

en: Would you like to try again?
target: Ingin coba lagi?

en: Write Config
target: Tulis konfigurasi

en: Write protection
target: Proteksi penulisan

en: Wrong email
target: Salah email

en: X server
target: Server X

en: X11 Display Manager allows you to graphically log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
target: Manajer Display X11 memungkinkan Anda login dg Sistem Window X dan
    menjalankan banyak sesi X di mesin lokal secara bersamaan.

en: XFree %s with 3D hardware acceleration
target: XFree %s dengan akselerasi hardware 3D

en: XFree %s with EXPERIMENTAL 3D hardware acceleration
target: XFree %s dengan akselerasi hardware 3D PERCOBAAN

en: XFree configuration
target: Konfigurasi XFree

en: XFree86 driver: %s
target: Driver XFree86: %s

en: XFree86 server: %s
target: Server XFree86: %s

en: XawTV isn't installed!
target: XawTV tak diinstal

en: Xinetd Service
target: Server Xinetd

en: Xpmac (installation display driver)
target: Xpmac (instalasi driver display)

en: Yaboot mode
target: mode Yaboot

en: Yemen
target: Yaman

en: Yes
target: Ya

en: Yes, I want autologin with this (user, desktop)
target: Ya, saya mau autologin dg (pengguna, desktop) ini

en: You appear to have an OldWorld or Unknown
     machine, the yaboot bootloader will not work for you.
    The install will continue, but you'll
     need to use BootX or some other means to boot your machine
target: Nampaknya Anda punya mesin kuno/tak dikenal.
    Bootloader yaboot takkan bekerja.
    Instalasi akan berlanjut, tapi Anda perlu memakai
    BootX atau yg lain utk mem-boot mesin Anda

en: You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
    
    With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
    
    For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
    
    Do you want to continue?
target: Konfigurasi disket Instalasi Otomatis akan dilakukan. Fitur ini agak berbahaya dan harus hati-hati digunakan.
    
    Dg fitur ini, Anda akan dapat mengulang instalasi yang Anda terapkan pada komputer ini, sementara pada beberapa tahapan akan ada pertanyaan interaktif untuk mengubah nilainya.
    
    Utk keamanan maximum, proses partisi dan format takkan pernah dijalankan
    secara otomatis, apapun yg Anda pilih selama instalasi komputer ini.
    
    Jalan terus?

en: You are about to configure your computer to install a PXE server as a DHCP server
    and a TFTP server to build an installation server.
    With that feature, other computers on your local network will be installable using this computer as source.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Anda sedang akan melakukan instalasi server PXE sbg server DHCP dan server
    TFTP utk membangun server instalasi. Dengan fitur tsb, komputer lain di
    jaringan lokal akan dpt diinstal menggunakan komputer ini sbg source-nya.
    Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg
    drakconnect sebelum pergi lebih jauh.
    
    Catatan: Anda mesti punya Adaptor Jaringan untuk mensetup Jaringan Area
    Lokal (LAN).

en: You are about to configure your computer to share its Internet connection.
    With that feature, other computers on your local network will be able to use this computer's Internet connection.
    
    Make sure you have configured your Network/Internet access using drakconnect before going any further.
    
    Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
target: Anda sedang membuat komputer Anda membagi koneksi Internetnya.
    Dengan cara ini, komputer lain di jaringan lokal dapat memakai koneksi Internet komputer ini.
    
    Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg drakconnect sebelum pergi lebih jauh.
    
    Catatan: Anda mesti punya Adapter Jaringan untuk mensetup Jaringan Area Lokal (LAN).

en: You are about to install the printing system %s on a system running in the %s security level.
    
    This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
    
    Do you really want to configure printing on this machine?
target: Anda akan menginstal sistem cetak %s di sistem dg level keamanan %s.
    
    Sistem cetak ini menjalankan daemon (proses background) yang menunggu dan memproses job cetak. Daemon ini juga dapat diakses oleh mesin remote via network jadi ia juga bisa jadi sasaran serangan. Karenanya hanya sedikit daemon terpilih yg dijalankan dlm level sekuriti ini.
    
    Benarkah Anda ingin mengkonfigurasikan printer di mesin ini?

en: You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as "ps auxwww".
    
    We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
    
    Use a password-less account on your Windows server, as the "GUEST" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
    
    Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the "%s" connection type in Printerdrake.
target: Anda akan menset up pencetakan ke account Mindows dengan katasandi. Berhubung kesalahan arsitekture piranti lunak klien Samba, katasandi ditampilkan dalam teks di baris perintah klien Samba untuk mengirim job cetak ke server Mindows. Ini memungkinkan tiap pengguna di mesin ini melihat katasandi di layar dengan perintah "ps auxwww".
    
    Kami anjurkan beberapa alternatif berikut (pada semua kasus Anda harus yakin bahwa hanya mesin di jaringan lokal Anda yang dapat mengakses server Mindows Anda, misalnya dengan adanya firewall):
    
    Pakailah account tanpa-katasandi di server Mindows Anda, sebagai account "GUEST" atau account khusus untuk pencetakan. Jangan hapus proteksi katasandi account pribadi atau administrator.
    
    Set up server Mindows Anda agar printer dapat dipakai dengan protokol LPD. Laluset up pencetakan dari mesin ini dengan tipe koneksi "%s" di Printerdrake.

en: You are configuring an OKI laser winprinter. These printers
    use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.
target: Anda sedang melakukan konfigurasi winprinter laser OKI. Printer ini memakai protokol komunikasi khusus dan karenanya bekerja hanya saat terhubung port paralel pertama. Bila printer Anda terhubung dg port lain atau dengan kotak server cetak hubungkan printer dg port paralel pertama sebelum melakukan tes cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan diabaikan oleh driver.

en: You are currently using %s as your boot manager.
    Click on Configure to launch the setup wizard.
target: Manajer Boot: %s. Klik Configure untuk memanggil ahli setup.

en: You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?
target: Anda akan melakukan konfigurasi printer remote. Ini memerlukan akses jaringan aktif, tapi konfigurasi jaringan Anda belum ada. Jika diteruskan tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda konfigurasikan sekarang. Bagaimana Anda mau teruskan?

en: You can also decide here whether printers on remote machines should be automatically made available on this machine.
target: Anda dapat memutuskan apakah printer di mesin remote harus dibuat secara otomatis agar dapat dipakai di mesin ini.

en: You can also decide here whether scanners on remote machines should be made available on this machine.
target: Dapat juga scanner di mesin remote dibuat agar dapat dipakai di mesin ini.

en: You can also use the graphical interface "xpdq" for setting options and handling printing jobs.
    If you are using KDE as desktop environment you have a "panic button", an icon on the desktop, labeled with "STOP Printer!", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
target: Anda juga dapat memakai antarmuka grafis "xpdq" untuk setting opsi dan kontrol job cetak.
    Jika KDE Anda pakai sbg lingkungan desktop Anda punya ikon "tombol panik", di desktop, berlabel "STOP Printer!", yang menghentikan semua job cetak seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.

en: You can configure each parameter of the module here.
target: Konfigurasi tiap parameter modul dapat dilakukan di sini.

en: You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
    Not all queues can be transferred due to the following reasons:
target: Anda dapat menyalin konfigurasi printer yg Anda buat utk spooler %s ke %s, spooler Anda sekarang. Semua data konfigurasi (nama printer, keterangan, lokasi, tipe koneksi, dan setting opsi default) disamakan, tapi job takkan ditransfer. 
    Tak semua antrian dapat ditransfer karena alasan berikut:

en: You can enter miscellaneous ports. 
    Valid examples are: 139/tcp 139/udp.
    Have a look at /etc/services for information.
target: Anda dapat memasukkan berbagai port. 
    Contoh lazim adalah: 139/tcp 139/udp.
    Informasi ada di /etc/services.

en: You can export using NFS or Samba. Please select which you'd like to use.
target: Anda dapat mengekspor dg NFS atau Samba. Pilih yg Anda ingin.

en: You can now partition %s.
    When you are done, don't forget to save using `w'
target: Anda kini dapat membuat partisi %s. 
    Ketika selesai jangan lupa simpan dengan menekan tombol `w'

en: You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers.
target: Anda dapat menset langsung URI utk akses printer. URI harus memenuhi spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua spooler.

en: You can't create a new partition
    (since you reached the maximal number of primary partitions).
    First remove a primary partition and create an extended partition.
target: Anda tak dapat membuat partisi baru
    (karena jumlah maksimal partisi primer telah tercapai).
    Hapuslah satu partisi primer dan buatlah partisi extended.

en: You can't install the bootloader on a %s partition
target: Anda tak dapat menginstal bootloader pada partisi %s

en: You can't select this package as there is not enough space left to install it
target: Paket ini tak dapat dipilih sebab tak ada ruang untuk menginstalnya

en: You can't select/unselect this package
target: Anda tak bisa pilih/buang paket ini

en: You can't unselect this package. It is already installed
target: Anda tak bisa buang paket ini, sebab dia sudah diinstal

en: You can't unselect this package. It must be upgraded
target: Anda tak bisa buang paket ini. dia mesti diupgrade

en: You can't use JFS for partitions smaller than 16MB
target: JFS tak dapat dipakai utk partisi berukuran di bawah 16MB

en: You can't use ReiserFS for partitions smaller than 32MB
target: ReiserFS tak dapat dipakai utk partisi berukuran di bawah 32MB

en: You can't use a LVM Logical Volume for mount point %s
target: Anda tak dapat menggunakan LVM Logical Volume untuk titik mount %s.

en: You can't use an encrypted file system for mount point %s
target: Anda tak dapat menggunakan sistem file bersandi utk mount point %s

en: You decided to install the bootloader on a partition.
    This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
    
    On which drive are you booting?
target: Anda memutuskan instalasi pemuat boot di partisi.
    Berarti Anda sudah punya pemuat boot di harddisk yang Anda boot (mis: System Commander).
    
    Di drive mana Anda boot?

en: You don't have a swap partition.
    
    Continue anyway?
target: Anda belum punya partisi swap
    
    Jalan terus?

en: You don't have an Internet connection.
    Create one first by clicking on 'Configure'
target: Tiada koneksi internet.
    Buat dulu dg meng-klik 'Configure'

en: You don't have any configured interface.
    Configure them first by clicking on 'Configure'
target: Tiada antarmuka terkonfigurasi.
    Konfigurasikan dulu dg meng-klik 'Configure'

en: You have a hole in your partition table but I can't use it.
    The only solution is to move your primary partitions to have the hole next to the extended partitions.
target: Anda punya tabel partisi tapi tidak bisa saya gunakan.
    Satu-satunya cara adalah memindahkan partisi primary Anda ke partisi
    extended selanjutnya

en: You have configured multiple ways to connect to the Internet.
    Choose the one you want to use.
target: Anda mengkonfigurasi bbrp jalan utk koneksi Internet.
    Pilih yg ingin Anda pakai.

en: You have more than one hard drive, which one do you install linux on?
target: Anda punya beberapa harddisk, yang mana yang ingin di-instal linux?

en: You have not configured X. Are you sure you really want this?
target: Belum ada konfigurasi X. Cukup begini saja?

en: You have one big MicroSoft Windows partition.
    I suggest you first resize that partition
    (click on it, then click on "Resize")
target: Anda punya satu partisi besar Windows MicroSoft.
    Disarankan utk mengubah ukuran partisi ini
    (klik di situ, lalu pilih "Ubah ukuran")

en: You have selected the following server(s): %s
    
    
    These servers are activated by default. They don't have any known security
    issues, but some new ones could be found. In that case, you must make sure
    to upgrade as soon as possible.
    
    
    Do you really want to install these servers?
target: Anda memilih server berikut: %s
    
    
    Server ini aktif jika dibiarkan. Sementara ini tiada kabar ttg sekuritas,
    tapi jika ada yg baru ditemukan, upgrade-lah selekas mungkin.
    
    
    Jadi instal server ini?

en: You have transferred your former default printer ("%s"), Should it be also the default printer under the new printing system %s?
target: Anda telah men-transfer printer standar lama Anda ("%s"), Akankah ia juga dijadikan printer default pada sistem cetak baru %s?

en: You haven't selected any group of packages.
    Please choose the minimal installation you want:
target: Anda belum memilih grup paket.
    Pilih instalasi minimal yang Anda ingin:

en: You may need to change your Open Firmware boot-device to
     enable the bootloader.  If you don't see the bootloader prompt at
     reboot, hold down Command-Option-O-F at reboot and enter:
     setenv boot-device %s,\\:tbxi
     Then type: shut-down
    At your next boot you should see the bootloader prompt.
target: Gantilah bootdevice Open Firmware untuk mengaktifkan bootloader.
     Jika Anda tak melihat prompt bootloader saat reboot, tekan
     Command-Option-O-F saat reboot dan ketik:
     setenv boot-device %s,\\:tbxi
     kemudian: shut-down
    Anda akan melihat prompt bootloader pada boot selanjutnya.

en: You may now provide options to module %s.
    Note that any address should be entered with the prefix 0x like '0x123'
target: Anda dapat memberikan opsi terhadap modul %s.
    Ingat, semua alamat harus diisikan dengan awalan 0x misalnya '0x123'

en: You may now provide options to module %s.
    Options are in format ``name=value name2=value2 ...''.
    For instance, ``io=0x300 irq=7''
target: Silakan beri parameter untuk modul %s ini.
    Parameter biasanya dalam format ``nama=nilai nama2=nilai2...''.
    Misalnya, ``io=0x300 irq=7''

en: You must also format %s
target: Anda harus juga memformat %s

en: You must be root to read configuration file.
target: Hanya root yg dapat membaca file konfigurasi.

en: You must choose an image file first!
target: Pilihlah file image!

en: You must choose/enter a printer/device!
target: Pilih/masukkan printer/device!

en: You must enter a device or file name!
target: Masukkan nama device atau file!

en: You must enter a host name or an IP address.
target: Masukkan nama host atau alamat IP.

en: You must have a FAT partition mounted in /boot/efi
target: Anda harus punya partisi FAT termount pada /boot/efi

en: You must have a root partition.
    For this, create a partition (or click on an existing one).
    Then choose action ``Mount point'' and set it to `/'
target: Pilih dulu partisi rootnya.
    Caranya, buatlah partisi (atau pilih di yang sudah ada).
    Lalu pilih ``Mount point'' dan set ke `/'

en: You must specify a kernel image
target: Anda harus tentukan image kernel

en: You must specify a root partition
target: Anda harus tentukan partisi swap

en: You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point
target: Anda perlu filesystem yg benar (ext2, reiserfs, xfs, atau jfs) utk titik mount ini

en: You need the Alcatel microcode.
    Download it at:
    %s
    and copy the mgmt.o in /usr/share/speedtouch
target: Anda perlu kode mikro alcatel.
    Downloadlah di
    %s
    dan copy mgmt.o dalam /usr/share/speedtouch

en: You need to reboot for the partition table modifications to take place
target: Anda harus reboot agar perubahan tabel partisi dapat berlaku

en: You now have the opportunity to download updated packages. These packages
    have been updated after the distribution was released. They may
    contain security or bug fixes.
    
    To download these packages, you will need to have a working Internet 
    connection.
    
    Do you want to install the updates ?
target: Anda kini dapat men-download paket update yg mungkin dirilis setelah
    distribusi ini dirilis.
    
    Anda perlu koneksi Internet untuk men-download.
    
    Ingin instal update?

en: You will receive an alert if one of the selected services is no longer running
target: Anda akan diingatkan bila salah satu servis terhenti

en: You will receive an alert if the load is higher than this value
target: Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini

en: You'll need to reboot before the modification can take place
target: Anda harus reboot agar perubahan tabel partisi dapat berlaku

en: You've not selected any font
target: Anda belum memilih font

en: You've selected a software RAID partition as root (/).
    No bootloader is able to handle this without a /boot partition.
    Please be sure to add a /boot partition
target: Anda telah memilih partisi RAID software sebagai root (/).
    Tanpa partisi /boot, bootloader tak dapat berbuat apa-apa.
    Hati-hati dalam menambahkan partisi /boot

en: Your %s has been configured.
    You may now scan documents using "XSane" from Multimedia/Graphics in the applications menu.
target: %s telah dikonfigurasikan.
    Anda dapat men-scan dokumen dg "XSane" dari Multimedia/Grafik di menu aplikasi.

en: Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.
target: Partisi Mindows Anda terlalu terfragmen, jalankan ``defrag'' dulu

en: Your card can have 3D hardware acceleration support but only with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,
    NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.
    Kartu Anda ini dapat digunakan XFree %s yang lebih baik dalam 2D.

en: Your card can have 3D hardware acceleration support but only with XFree %s.
    Your card is supported by XFree %s which may have a better support in 2D.
target: Kartu Anda punya akselerasi hardware 3D, tapi hanya bisa digunakan pada XFree %s.
    Kartu Anda ini dapat dipakai pada XFree %s yg punya dukungan baik dalam 2D.

en: Your card can have 3D hardware acceleration support with XFree %s,
    NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
target: Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,
    NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.

en: Your card can have 3D hardware acceleration support with XFree %s.
target: Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s.

en: Your choice? (0/1, default `%s')
target: Pilihan Anda? (0/1, default %s)

en: Your choice? (default %s)
target: Pilihan Anda? (default %s)

en: Your choice? (default `%s'%s)
target: Pilihan Anda? (default `%s'%s)

en: Your graphic card seems to have a TV-OUT connector.
    It can be configured to work using frame-buffer.
    
    For this you have to plug your graphic card to your TV before booting your computer.
    Then choose the "TVout" entry in the bootloader
    
    Do you have this feature?
target: Kartu grafik Anda tak punya konektor TV-OUT.
    Ia dapat dikonfigurasikan agar bekerja menggunakan frame-buffer.
    
    Untuk ini Anda harus menyambung kartu grafik ke TV sebelum memboot komputer.
    Lalu pilih entri "TVout" di bootloader
    
    Anda punya fitur ini?

en: Your modem isn't supported by the system.
    Take a look at http://www.linmodems.org
target: Tak ada support utk modem Anda.
    Coba lihat http://www.linmodems.org

en: Your multi-function device was configured automatically to be able to scan. Now you can scan with "scanimage" ("scanimage -d hp:%s" to specify the scanner when you have more than one) from the command line or with the graphical interfaces "xscanimage" or "xsane". If you are using the GIMP, you can also scan by choosing the appropriate point in the "File"/"Acquire" menu. Call also "man scanimage" on the command line to get more information.
    
    Do not use "scannerdrake" for this device!
target: Alat multifungsi Anda terkonfigurasi otomatis agar dapat men-scan. Kini Anda dapat men-scan dg "scanimage" ("scanimage -d hp:%s" utk menentukan scanner jika Anda punya beberapa) dari baris perintah atau dg antarmuka grafis "xscanimage" atau "xsane". Jika Anda memakai GIMP, Anda dapat juga men-scan dg memilih poin yg sesuai di menu "File"/"Acquire". Panggil "man scanimage" di baris perintah untuk informasi lanjut.
    
    Jangan pakai "scannerdrake" utk alat ini!

en: Your personal phone number
target: Nomor telepon Anda

en: Your printer model
target: Model printer Anda

en: Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program "MtoolsFM" (Menu: "Applications" -> "File tools" -> "MTools File Manager") or the command line utilities "mtools" (enter "man mtools" on the command line for more info). You find the card's file system under the drive letter "p:", or subsequent drive letters when you have more than one HP printer with photo card drives. In "MtoolsFM" you can switch between drive letters with the field at the upper-right corners of the file lists.
target: Printer Anda telah dikonfigurasikan secara otomatis untuk mengakses drive kartu foto dari PC Anda. Kini Anda dapat mengakses kartu foto Anda dg program grafis "MtoolsFM" (Menu: "Aplikasi" -> "Perkakas File" -> "Manajer File MTools") atau baris komando "mtools" (ketik "man mtools" di baris komando utk info lebih lanjut). Anda temukan sistem file kartu di drive "p:", atau huruf drive selanjutnya bila Anda punya lebih dari satu printer HP dengan drive kartu foto. Di "MtoolsFM" Anda dapat men-switch drive dg isian di sudut kanan atas daftar file.

en: Your system does not have enough space left for installation or upgrade (%d > %d)
target: Tak cukup ruang untuk instalasi atau upgrade (%d > %d)

en: Your system is low on resources. You may have some problem installing
    Mandrake Linux. If that occurs, you can try a text install instead. For this,
    press `F1' when booting on CDROM, then enter `text'.
target: Sumber daya sistem Anda rendah. Nantinya Anda akan sulit menginstal
    Linux-Mandrake. Cobalah instalasi text. Untuk hal ini silakan
    tekan `F1' saat booting pada CDROM, lalu ketikkan `text'.

en: Your system supports multiple head configuration.
    What do you want to do?
target: Sistem Anda men-support konfigurasi head majemuk.
    Apa yg ingin Anda lakukan?

en: Yugoslavian (latin)
target: Yugoslavia (latin)

en: Zeroconf Host name
target: Nama Host Zeroconf

en: Zeroconf host name must not contain a .
target: Nama host Zeroconf tak boleh berisi .

en: [--config-info] [--daemon] [--debug] [--default] [--show-conf]
    Backup and Restore application
    
    --default             : save default directories.
    --debug               : show all debug messages.
    --show-conf           : list of files or directories to backup.
    --config-info         : explain configuration file options (for non-X users).
    --daemon              : use daemon configuration. 
    --help                : show this message.
    --version             : show version number.
target: [--config-info] [--daemon] [--debug] [--default] [--show-conf]
    Aplikasi Backup dan Restore
    
    --default             : simpan direktori default.
    --debug               : tampilkan semua pesan debug.
    --show-conf           : daftar file atau direktori yg di-backup.
    --config-info         : jelaskan opsi file konfigurasi (utk pengguna non-X).
    --daemon              : pakai konfigurasi daemon.
    --help                : tampilkan pesan ini.
    --version             : tampilkan nomor versi.

en: [OPTIONS]
    Network & Internet connection and monitoring application
    
    --defaultintf interface : show this interface by default
    --connect : connect to internet if not already connected
    --disconnect : disconnect to internet if already connected
    --force : used with (dis)connect : force (dis)connection.
    --status : returns 1 if connected 0 otherwise, then exit.
    --quiet : don't be interactive. To be used with (dis)connect.
target: [OPSI]
    Koneksi jaringan & Internet dan aplikasi monitoring
    
    --defaultintf antarmuka : tampilkan antarmuka ini
    --connect : sambung ke internet jika belum
    --disconnect : putus sambungan internet jika telah tersambung
    --force : digunakan dg (dis)connect : (putus)sambung paksa.
    --status : kembalikan 1 jika tersambung 0 jika tidak, lalu keluar.
    --quiet : jangan interaktif. Digunakan dg (dis)connect.

en: [OPTIONS] [PROGRAM_NAME]
    
    OPTIONS:
      --help            - print this help message.
      --report          - program should be one of mandrake tools
      --incident        - program should be one of mandrake tools
target: [OPSI] [NAMA_PROGRAM]
    
    OPSI:
      --help            - cetak pesan ini.
      --report          - program harus berupa alat mandrake
      --incident        - program harus berupa alat mandrake

en: [OPTIONS]...
    Mandrake Terminal Server Configurator
    --enable         : enable MTS
    --disable        : disable MTS
    --start          : start MTS
    --stop           : stop MTS
    --adduser        : add an existing system user to MTS (requires username)
    --deluser        : delete an existing system user from MTS (requires username)
    --addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)
    --delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)
target: [OPSI]...
    Konfigurator Server Terminal Mandrake
    --enable         : aktifkan MTS
    --disable        : matikan MTS
    --start          : jalankan MTS
    --stop           : stop MTS
    --adduser        : tambahkan pengguna sistem yg telah ada ke MTS (perlu nama pengguna)
    --deluser        : hapus pengguna sistem yg telah ada dari MTS (perlu nama pengguna)
    --addclient      : tambahkan mesin klien ke MTS (perlu alamat MAC, IP, nama image nbi)
    --delclient      : hapus mesin klien dari MTS (perlu alamat MAC, IP, nama image nbi)

en: [OPTION]...
      --no-confirmation      don't ask first confirmation question in MandrakeUpdate mode
      --no-verify-rpm        don't verify packages signatures
      --changelog-first      display changelog before filelist in the description window
      --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found
target: [OPSI]...
      --no-confirmation      tiada konfirmasi awal pada modus MandrakeUpdate
      --no-verify-rpm        tidak ada verifikasi tandatangan paket
      --changelog-first      tampilkan changelog sebelum filelist di window penjelasan
      --merge-all-rpmnew     merger semua file .rpmnew/.rpmsave yg ditemukan

en: [keyboard]
target: [papanketik]

en: a number
target: nomor

en: access to X programs
target: akses ke program X

en: access to administrative files
target: akses ke file administratif

en: access to compilation tools
target: akses ke peralatan kompilasi

en: access to network tools
target: akses ke peralatan jaringan

en: access to rpm tools
target: akses ke peralatan rpm

en: activated
target: telah diaktifkan

en: alert configuration
target: konfigurasi peringatan

en: allow "su"
target: izinkan "su"

en: and %d unknown printers
target: dan %d printer tak dikenal

en: and one unknown printer
target: dan satu printer tak dikenal

en: apmd is used for monitoring battery status and logging it via syslog.
    It can also be used for shutting down the machine when the battery is low.
target: apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.
    apmd juga bisa untuk mematikan mesin waktu baterenya habis.

en: authentication
target: otentikasi

en: average
target: rata-rata

en: browse
target: jelajah

en: but not matching
target: tapi bukan pencocokan

en: cable connection detected
target: Koneksi kabel terdeteksi

en: choose device
target: pilih device

en: choose image
target: pilih image

en: choose image file
target: pilih file image

en: chunk size
target: ukuran chunk

en: class of hardware device
target: kelas alat hardware

en: click here if you are sure.
target: klik di sini jika Anda yakin.

en: comma separated numbers
target: bilangan terpisah koma

en: comma separated strings
target: string terpisah koma

en: commands before booting, or 'c' for a command-line.
target: perintah sebelum booting, atau 'c' untuk command line.

en: compact
target: kompak

en: consolehelper missing
target: consolehelper hilang

en: could not find any font in your mounted partitions
target: tak ditemukan font di partisi termount

en: could not find any font.
target: gagal temukan font.

en: cron is a standard UNIX program that runs user-specified programs
    at periodic scheduled times. vixie cron adds a number of features to the basic
    UNIX cron, including better security and more powerful configuration options.
target: Cron adalah program UNIX standar yang menjalankan program pengguna
    pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap
    dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan
    lebih mantapnya option pada konfigurasinya.

en: daily
target: harian

en: default
target: standar

en: detected
target: terdeteksi

en: detected %s
target: %s telah terdeteksi

en: detected on port %s
target: dideteksi pada port %s

en: dhcpd Config...
target: Konfig dhcpd...

en: dhcpd Server Configuration
target: Konfigurasi Server dhcpd

en: disable
target: matikan

en: disabled
target: telah dimatikan

en: dismiss
target: tutup

en: done
target: selesai

en: drakTermServ Overview
target: Overview drakTermServ

en: drakfirewall configurator
    
    Make sure you have configured your Network/Internet access with
    drakconnect before going any further.
target: konfigurator drakfirewall
    
    Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg
    drakconnect sebelum melanjutkan.

en: drakfirewall configurator
    
    This configures a personal firewall for this Mandrake Linux machine.
    For a powerful and dedicated firewall solution, please look to the
    specialized MandrakeSecurity Firewall distribution.
target: konfigurator drakfirewall
    
    Program ini mengkonfigurasi firewall pribadi sistem Linux Mandrake.
    Untuk membuat solusi firewall yang lebih baik, cobalah
    distribusi khusus MandrakeSecurity Firewall

en: early pentiums were buggy and freezed when decoding the F00F bytecode
target: pentium lama penuh kesalahan dan beku bila men-decode kode byte F00F

en: enable
target: aktifkan

en: enable radio support
target: aktifkan support radio

en: error unmounting %s: %s
target: error melepas mount %s: %s

en: ethernet card(s) detected
target: ada kartu ethernet terdeteksi

en: family of the cpu (eg: 6 for i686 class)
target: keluarga cpu (mis: 6 utk kelas i686)

en: file list sent by FTP: %s
target: daftar file yg dikirim oleh FTP: %s

en: final resolution
target: resolusi akhir

en: first step creation
target: pembuatan step pertama

en: force
target: paksa

en: generate auto-install floppy
target: buat disket instalasi otomatis

en: generation of the cpu (eg: 8 for PentiumIII, ...)
target: generasi cpu (mis: 8 utk PentiumIII, ...)

en: hard disk model
target: model harddisk

en: here if no.
target: di sini jika tidak.

en: high
target: tinggi

en: hourly
target: perjam

en: if needed
target: jika perlu

en: if set to yes, check additions/removals of sgid files.
target: Jika diset ke ya, cek penambahan/penghapusan file sgid.

en: if set to yes, check additions/removals of suid root files.
target: jika diset ya, cek tambahan/hapusan file root suid.

en: if set to yes, check empty password in /etc/shadow.
target: jika diset ya, cek katasandi kosong di /etc/shadow.

en: if set to yes, check files/directories writable by everybody.
target: jika ya, cek file/direktori agar dapat ditulisi oleh semua orang.

en: if set to yes, check for :
    
    - empty passwords,
    
    - no password in /etc/shadow
    
    - for users with the 0 id other than root.
target: jika ya, cek :
    
    - katasandi kosong,
    
    - katasandi kosong di /etc/shadow
    
    - pengguna dg id 0 yg bukan root.

en: if set to yes, check if the network devices are in promiscuous mode.
target: jika ya, cek apakah piranti jaringan berada dalam modus promiscuous.

en: if set to yes, check open ports.
target: Jika diset ke ya, cek port yg terbuka.

en: if set to yes, check permissions of files in the users' home.
target: jika diset ya, cek izin file-file di home pengguna.

en: if set to yes, report check result by mail.
target: jika diset ke ya, laporkan hasil cek dg mail.

en: if set to yes, report check result to syslog.
target: jika ya, laporkan hasil cek ke syslog.

en: if set to yes, report unowned files.
target: jika diset ya, laporkan file tak bertuan.

en: if set to yes, reports check result to tty.
target: jika diset ya, laporkan hasil cek ke tty.

en: if set to yes, run chkrootkit checks.
target: Jika diset ya, jalankan cek chkrootkit.

en: if set to yes, run some checks against the rpm database.
target: jika diset ya, cek database rpm

en: if set to yes, run the daily security checks.
target: jika ya, jalankan cek keamanan harian.

en: if set to yes, verify checksum of the suid/sgid files.
target: jika ya, lakukan checksum file suid/sgid.

en: if set, send the mail report to this email address else send it to root.
target: Jika diset, kirim laporan ke alamat email ini, jika tidak, kirim ke root.

en: ignore
target: abaikan

en: important
target: penting

en: information level that can be obtained through the cpuid instruction
target: tingkat info yg didapat dg perintah cpuid

en: kdesu missing
target: kdesu hilang

en: local config: %s
target: konfigurasi lokal: %s

en: local config: false
target: konfigurasi lokal: salah

en: lpd is the print daemon required for lpr to work properly. It is
    basically a server that arbitrates print jobs to printer(s).
target: lpd adalah daemon printer yang jadi tulang punggung lpr. Dia
    bertugas sebagai server yang memberi perintah kepada printer untuk mencetak.

en: maybe
target: hmm..

en: mkinitrd optional arguments
target: opsi argumen mkinitrd

en: mkraid failed
target: mkraid gagal

en: mkraid failed (maybe raidtools are missing?)
target: mkraid gagal (mungkin raidtoolsnya tak ada?)

en: monthly
target: bulanan

en: mount failed:
target: gagal melakukan mount:

en: mounting partition %s in directory %s failed
target: penyambungan partisi %s ke direktori %s gagal

en: must have
target: harus ada

en: named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses.
target: named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk menerjemahkan nama host ke IP address.

en: network printer port
target: port printer jaringan

en: new
target: baru

en: new dynamic device name generated by core kernel devfs
target: nama device dinamik baru yg dihasilkan oleh devfs kernel core

en: nice
target: bagus

en: no
target: tidak

en: no fonts found
target: tiada font ditemukan

en: none
target: tiada

en: not configured
target: tak dikonfigurasikan

en: not enough room in /boot
target: tak cukup ruang di /boot

en: number of capture buffers for mmap'ed capture
target: Jumlah buffer penangkap utk penangkapan mmap

en: official vendor name of the cpu
target: nama vendor resmi cpu

en: old static device name used in dev package
target: nama alat statis lama yg dipakai di paket dev

en: omit raid modules
target: abaikan modul RAID

en: omit scsi modules
target: abaikan modul SCSI

en: on channel %d id %d
target: pada kanal %d id %d

en: package 'ImageMagick' is required to be able to complete configuration.
    Click "Ok" to install 'ImageMagick' or "Cancel" to quit
target: paket 'ImageMagick' diperlukan agar kerja bisa dilakukan dg benar.
    Klik "Ok" utk menginstal 'ImageMagick' atau "Batal" utk keluar

en: paranoid
target: penakut

en: parse all fonts
target: baca semua font

en: partition %s
target: Partisi %s

en: partition %s is now known as %s
target: partisi %s sekarang jadi %s

en: please choose the date to restore
target: pilih tanggal restorasi

en: please wait during ttmkfdir...
target: tunggu saat ttmkfdir...

en: please wait, parsing file: %s
target: tunggu, sedang menelaah file: %s

en: primary
target: primer

en: received
target: diterima

en: received:
target: diterima:

en: reconfigure
target: konfigurasi ulang

en: replay
target: ulang

en: restrict
target: batasi

en: running
target: sedang jalan

en: saving Bootsplash theme...
target: simpan tema Bootsplash...

en: search
target: cari

en: secondary
target: sekunder

en: select path to restore (instead of /)
target: pilih path utk restorasi (selain /)

en: sent:
target: dikirimkan:

en: service setting
target: setting servis

en: simple
target: mudah

en: size of the (second level) cpu cache
target: ukuran cache cpu (level kedua)

en: special capacities of the driver (burning ability and or DVD support)
target: kapasitas khusus driver (kemampuan bakar dan/atau support DVD)

en: stepping of the cpu (sub model (generation) number)
target: stepping cpu (nomor submodel (generasi))

en: stopped
target: dihentikan

en: sub generation of the cpu
target: subgenerasi cpu

en: text box height
target: tinggi kotak teks

en: text width
target: lebar teks

en: the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)
target: Frekuensi CPU dlm MHz (jumlah instruksi perdetik yg dapat dieksekusi oleh CPU)

en: the WP flag in the CR0 register of the cpu enforce write proctection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)
target: Flag WP di register CR0 cpu memaksakan proteksi penulisan pada level halaman memori, shg memungkinkan prosesor mencegah akses kernel ke memori pengguna yg tak dicek (ini adalah penjaga bug)

en: the color of the progress bar
target: warna papan perkembangan

en: the height of the progress bar
target: tinggi papan perkembangan

en: the list of alternative drivers for this sound card
target: daftar driver alternatif untuk kartu suara ini

en: the module of the GNU/Linux kernel that handles the device
target: modul kernel GNU/Linux yang menangani alat tersebut

en: the name of the CPU
target: nama CPU

en: the number of buttons the mouse has
target: jumlah tombol mouse

en: the number of the processor
target: nomor prosesor

en: the progress bar x coordinate
    of its upper left corner
target: koordinat x sudut kiri
    atas papan perkembangan

en: the progress bar y coordinate
    of its upper left corner
target: koordinat y sudut kiri
    atas papan perkembangan

en: the type of bus on which the mouse is connected
target: tipe bus tempat mouse dicolokkan

en: the vendor name of the device
target: nama pembuat device

en: the vendor name of the processor
target: nama vendor prosesor

en: the width of the progress bar
target: lebar papan perkembangan

en: this field describes the device
target: penjelasan device

en: this is the physical bus on which the device is plugged (eg: PCI, USB, ...)
target: ini adalah bus fisik tempat alat tersambung (mis: PCI, USB, ...)

en: transmitted
target: dipancarkan

en: type1inst building
target: bangun type1inst

en: type: %s
target: tipe: %s

en: type: thin
target: tipe: tipis

en: unknown
target: tak dikenal

en: use dhcp
target: gunakan dhcp

en: use pppoe
target: gunakan pppoe

en: use pptp
target: gunakan pptp

en: very nice
target: amat bagus

en: weekly
target: mingguan

en: when checked, owner and group won't be changed
target: jika dipilih, pemilik dan grup takkan diubah

en: whether this cpu has the Cyrix 6x86 Coma bug
target: apakah cpu ini punya kutu Coma 6x86 Cyrix

en: with /usr
target: dengan /usr

en: x coordinate of text box
    in number of characters
target: koordinat x kotak
    teks (jumlah huruf)

en: xfs restart
target: jalankan ulang xfs

en: y coordinate of text box
    in number of characters
target: koordinat x kotak
    teks (jumlah huruf)

en: yes
target: ya

en: yes means the arithmetic coprocessor has an exception vector attached
target: ya artinya koprosesor aritmetik punya vektor eksepsi

en: yes means the processor has an arithmetic coprocessor
target: ya artinya prosesor punya koprosesor aritmetik
