# recount quick start guide

Leonardo Collado-Torres1,2*

1Lieber Institute for Brain Development, Johns Hopkins Medical Campus
2Center for Computational Biology, Johns Hopkins University

*lcolladotor@gmail.com

#### 4 June 2025

#### Package

recount 1.35.0

# 1 Basics

## 1.1 Install recount

`R` is an open-source statistical environment which can be easily modified to enhance its functionality via packages. recount is a `R` package available via the Bioconductor repository for packages. `R` can be installed on any operating system from CRAN after which you can install recount by using the following commands in your `R` session:

    if (!requireNamespace("BiocManager", quietly = TRUE)) {
        install.packages("BiocManager")
    }

    BiocManager::install("recount")

    ## Check that you have a valid Bioconductor installation
    BiocManager::valid()

## 1.2 Required knowledge

recount is based on many other packages and in particular in those that have implemented the infrastructure needed for dealing with RNA-seq data. That is, packages like GenomicFeatures and rtracklayer that allow you to import the data. A recount user is not expected to deal with those packages directly but will need to be familiar with SummarizedExperiment to understand the results recount generates. It might also prove to be highly beneficial to check the

- DESeq2 package for performing differential expression analysis with the RangedSummarizedExperiment objects,
- DEFormats package for switching the objects to those used by other differential expression packages such as edgeR,
- derfinder package for performing annotation-agnostic differential expression analysis.

If you are asking yourself the question “Where do I start using Bioconductor?” you might be interested in this blog post.

## 1.3 Asking for help

As package developers, we try to explain clearly how to use our packages and in which order to use the functions. But `R` and `Bioconductor` have a steep learning curve so it is critical to learn where to ask for help. The blog post quoted above mentions some but we would like to highlight the Bioconductor support site as the main resource for getting help: remember to use the `recount` tag and check the older posts. Other alternatives are available such as creating GitHub issues and tweeting. However, please note that if you want to receive help you should adhere to the posting guidelines. It is particularly critical that you provide a small reproducible example and your session information so package developers can track down the source of the error.

## 1.4 Workflow using recount

We have written a workflow on how to use recount that explains more details on how to use this package with other Bioconductor packages as well as the details on the actual counts provided by recount. Check it at f1000research.com/articles/6-1558/v1 or bioconductor.org/help/workflows/recountWorkflow/ (Collado-Torres, Nellore, and Jaffe, 2017).

## 1.5 Citing recount

We hope that recount will be useful for your research. Please use the following information to cite the package and the overall approach. Thank you!

    ## Citation info
    citation("recount")

    ## To cite package 'recount' in publications use:
    ##
    ##   Collado-Torres L, Nellore A, Kammers K, Ellis SE, Taub MA, Hansen KD,
    ##   Jaffe AE, Langmead B, Leek JT (2017). "Reproducible RNA-seq analysis
    ##   using recount2." _Nature Biotechnology_. doi:10.1038/nbt.3838
    ##   <https://doi.org/10.1038/nbt.3838>,
    ##   <http://www.nature.com/nbt/journal/v35/n4/full/nbt.3838.html>.
    ##
    ##   Collado-Torres L, Nellore A, Jaffe AE (2017). "recount workflow:
    ##   Accessing over 70,000 human RNA-seq samples with Bioconductor
    ##   [version 1; referees: 1 approved, 2 approved with reservations]."
    ##   _F1000Research_. doi:10.12688/f1000research.12223.1
    ##   <https://doi.org/10.12688/f1000research.12223.1>,
    ##   <https://f1000research.com/articles/6-1558/v1>.
    ##
    ##   Ellis SE, Collado-Torres L, Jaffe AE, Leek JT (2018). "Improving the
    ##   value of public RNA-seq expression data by phenotype prediction."
    ##   _Nucl. Acids Res._. doi:10.1093/nar/gky102
    ##   <https://doi.org/10.1093/nar/gky102>,
    ##   <https://doi.org/10.1093/nar/gky102>.
    ##
    ##   Collado-Torres L, Nellore A, Kammers K, Ellis SE, Taub MA, Hansen KD,
    ##   Jaffe AE, Langmead B, Leek JT (2025). _Explore and download data from
    ##   the recount project_. doi:10.18129/B9.bioc.recount
    ##   <https://doi.org/10.18129/B9.bioc.recount>,
    ##   https://github.com/leekgroup/recount - R package version 1.35.0,
    ##   <http://www.bioconductor.org/packages/recount>.
    ##
    ##   Frazee AC, Langmead B, Leek JT (2011). "ReCount: A multi-experiment
    ##   resource of analysis-ready RNA-seq gene count datasets." _BMC
    ##   Bioinformatics_. doi:10.1186/1471-2105-12-449
    ##   <https://doi.org/10.1186/1471-2105-12-449>,
    ##   <https://doi.org/10.1186/1471-2105-12-449>.
    ##
    ##   Razmara A, Ellis SE, Sokolowski DJ, Davis S, Wilson MD, Leek JT,
    ##   Jaffe AE, Collado-Torres L (2019). "recount-brain: a curated
    ##   repository of human brain RNA-seq datasets metadata." _bioRxiv_.
    ##   doi:10.1101/618025 <https://doi.org/10.1101/618025>,
    ##   <https://doi.org/10.1101/618025>.
    ##
    ##   Imada E, Sanchez DF, Collado-Torres L, Wilks C, Matam T, Dinalankara
    ##   W, Stupnikov A, Lobo-Pereira F, Yip C, Yasuzawa K, Kondo N, Itoh M,
    ##   Suzuki H, Kasukawa T, Hon CC, de Hoon MJ, Shin JW, Carninci P, Jaffe
    ##   AE, Leek JT, Favorov A, Franco GR, Langmead B, Marchionni L (2020).
    ##   "Recounting the FANTOM CAGE–Associated Transcriptome." _Genome
    ##   Research_. doi:10.1101/gr.254656.119
    ##   <https://doi.org/10.1101/gr.254656.119>,
    ##   <https://doi.org/10.1101/gr.254656.119>.
    ##
    ## To see these entries in BibTeX format, use 'print(<citation>,
    ## bibtex=TRUE)', 'toBibtex(.)', or set
    ## 'options(citation.bibtex.max=999)'.

# 2 Quick start to using to recount

Main updates:

- As of January 30, 2017 the annotation used for the exon and gene counts is Gencode v25.
- As of January 12, 2018 transcripts counts are available via recount2 thanks to the work of Fu et al, bioRxiv, 2018. Disjoint exon counts (version 2) were also released as described in detail in the recount website documentation tab.
- As of April 29, 2019 FANTOM-CAT/recount2 annotation quantifications area available via recount2 thanks to the work by Imada, Sanchez, et al., bioRxiv, 2019.

Here is a very quick example of how to download a `RangedSummarizedExperiment` object with the gene counts for a 2 groups project (12 samples) with SRA study id SRP009615 using the recount package (Collado-Torres, Nellore, Kammers, Ellis, Taub, Hansen, Jaffe, Langmead, and Leek, 2017). The `RangedSummarizedExperiment` object is defined in the SummarizedExperiment (Morgan, Obenchain, Hester, and Pagès, 2017) package and can be used for differential expression analysis with different packages. Here we show how to use DESeq2 (Love, Huber, and Anders, 2014) to perform the differential expresion analysis.

This quick analysis is explained in more detail later on in this document. Further information about the recount project can be found in the main publication. Check the recount website for related publications.

    ## Load library
    library("recount")

    ## Find a project of interest
    project_info <- abstract_search("GSE32465")

    ## Download the gene-level RangedSummarizedExperiment data
    download_study(project_info$project)

    ## Load the data
    load(file.path(project_info$project, "rse_gene.Rdata"))

    ## Browse the project at SRA
    browse_study(project_info$project)

    ## View GEO ids
    colData(rse_gene)$geo_accession

    ## Extract the sample characteristics
    geochar <- lapply(split(colData(rse_gene), seq_len(nrow(colData(rse_gene)))), geo_characteristics)

    ## Note that the information for this study is a little inconsistent, so we
    ## have to fix it.
    geochar <- do.call(rbind, lapply(geochar, function(x) {
        if ("cells" %in% colnames(x)) {
            colnames(x)[colnames(x) == "cells"] <- "cell.line"
            return(x)
        } else {
            return(x)
        }
    }))

    ## We can now define some sample information to use
    sample_info <- data.frame(
        run = colData(rse_gene)$run,
        group = ifelse(grepl("uninduced", colData(rse_gene)$title), "uninduced", "induced"),
        gene_target = sapply(colData(rse_gene)$title, function(x) {
            strsplit(strsplit(
                x,
                "targeting "
            )[[1]][2], " gene")[[1]][1]
        }),
        cell.line = geochar$cell.line
    )

    ## Scale counts by taking into account the total coverage per sample
    rse <- scale_counts(rse_gene)

    ## Add sample information for DE analysis
    colData(rse)$group <- sample_info$group
    colData(rse)$gene_target <- sample_info$gene_target

    ## Perform differential expression analysis with DESeq2
    library("DESeq2")

    ## Specify design and switch to DESeq2 format
    dds <- DESeqDataSet(rse, ~ gene_target + group)

    ## Perform DE analysis
    dds <- DESeq(dds, test = "LRT", reduced = ~gene_target, fitType = "local")
    res <- results(dds)

    ## Explore results
    plotMA(res, main = "DESeq2 results for SRP009615")

    ## Make a report with the results
    library("regionReport")
    DESeq2Report(dds,
        res = res, project = "SRP009615",
        intgroup = c("group", "gene_target"), outdir = ".",
        output = "SRP009615-results"
    )

The recount project also hosts the necessary data to perform annotation-agnostic differential expression analyses with derfinder (Collado-Torres, Nellore, Frazee, Wilks, Love, Langmead, Irizarry, Leek, and Jaffe, 2017). An example analysis would like this:

    ## Define expressed regions for study SRP009615, only for chromosome Y
    regions <- expressed_regions("SRP009615", "chrY",
        cutoff = 5L,
        maxClusterGap = 3000L
    )

    ## Compute coverage matrix for study SRP009615, only for chromosome Y
    system.time(rse_ER <- coverage_matrix("SRP009615", "chrY", regions))

    ## Round the coverage matrix to integers
    covMat <- round(assays(rse_ER)$counts, 0)

    ## Get phenotype data for study SRP009615
    pheno <- colData(rse_ER)

    ## Complete the phenotype table with the data we got from GEO
    m <- match(pheno$run, sample_info$run)
    pheno <- cbind(pheno, sample_info[m, 2:3])

    ## Build a DESeqDataSet
    dds_ers <- DESeqDataSetFromMatrix(
        countData = covMat, colData = pheno,
        design = ~ gene_target + group
    )

    ## Perform differential expression analysis with DESeq2 at the ER-level
    dds_ers <- DESeq(dds_ers,
        test = "LRT", reduced = ~gene_target,
        fitType = "local"
    )
    res_ers <- results(dds_ers)

    ## Explore results
    plotMA(res_ers, main = "DESeq2 results for SRP009615 (ER-level, chrY)")

    ## Create a more extensive exploratory report
    DESeq2Report(dds_ers,
        res = res_ers,
        project = "SRP009615 (ER-level, chrY)",
        intgroup = c("group", "gene_target"), outdir = ".",
        output = "SRP009615-results-ER-level-chrY"
    )

# 3 Introduction

recount is an R package that provides an interface to the recount project website. This package allows you to download the files from the recount project and has helper functions for getting you started with differential expression analyses. This vignette will walk you through an example.

# 4 Sample DE analysis

This is a brief overview of what you can do with recount. In this particular example we will download data from the SRP009615 study which sequenced 12 samples as described in the previous link.

If you don’t have recount installed, please do so with:

    install.packages("BiocManager")
    BiocManager::install("recount")

Next we load the required packages. Loading recount will load the required dependencies.

    ## Load recount R package
    library("recount")

Lets say that we don’t know the actual SRA accession number for this study but we do know a particular term which will help us identify it. If that’s the case, we can use the `abstract_search()` function to identify the study of interest as shown below.

    ## Find a project of interest
    project_info <- abstract_search("GSE32465")

    ## Explore info
    project_info

    ##     number_samples species
    ## 340             12   human
    ##                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               abstract
    ## 340 Summary: K562-shX cells are made in an effort to validate TFBS data and ChIP-seq antibodies in Myers lab (GSE32465). K562 cells are transduced with lentiviral vector having Tet-inducible shRNA targeting a transcription factor gene. Cells with stable integration of shRNA constructs are selected using puromycin in growth media. Doxycycline is added to the growth media to induce the expression of shRNA and a red fluorescent protein marker.  A successful shRNA cell line shows at least a 70% reduction in expression of the target transcription factor as measured by qPCR. For identification, we designated these cell lines as K562-shX, where X is the transcription factor targeted by shRNA and K562 denotes the parent cell line.  For example, K562-shATF3 cells are K562 derived cells selected for stable integration of shRNA targeting the transcription factor ATF3 gene and showed at least a 70% reduction in the expression of ATF3 gene when measured by qPCR. Cells growing without doxycycline (uninduced) are used as a control to measure the change in expression of target transcription factor gene after induction of shRNA using doxycycline. For detailed growth and culturing protocols for these cells please refer to http://hudsonalpha.org/myers-lab/protocols . To identify the potential downstream targets of the candidate transcription factor, analyze the mRNA expression profile of the uninduced and induced K562-shX using RNA-seq.    For data usage terms and conditions, please refer to http://www.genome.gov/27528022 and http://www.genome.gov/Pages/Research/ENCODE/ENCODEDataReleasePolicyFinal2008.pdf    Overall Design: Make K562-shX cells as described in the http://hudsonalpha.org/myers-lab/protocols . Measure the mRNA expression levels in uninduced K562-shX and induced K562-shX cells in two biological replicates using RNA-seq. Identify the potential downstream targets of the candidate transcription factor.
    ##       project
    ## 340 SRP009615

## 4.1 Download data

Now that we have a study that we are interested in, we can download the RangedSummarizedExperiment object (see SummarizedExperiment) with the data summarized at the gene level. The function `download_study()` helps us do this. If you are interested on how the annotation was defined, check `reproduce_ranges()` described in the Annotation section further down.

    ## Download the gene-level RangedSummarizedExperiment data
    download_study(project_info$project)

    ## 2025-06-04 21:33:43.124503 downloading file rse_gene.Rdata to SRP009615

    ## Load the data
    load(file.path(project_info$project, "rse_gene.Rdata"))

    ## Delete it if you don't need it anymore
    unlink(project_info$project, recursive = TRUE)

We can explore a bit this RangedSummarizedExperiment as shown below.

    rse_gene

    ## class: RangedSummarizedExperiment
    ## dim: 58037 12
    ## metadata(0):
    ## assays(1): counts
    ## rownames(58037): ENSG00000000003.14 ENSG00000000005.5 ...
    ##   ENSG00000283698.1 ENSG00000283699.1
    ## rowData names(3): gene_id bp_length symbol
    ## colnames(12): SRR387777 SRR387778 ... SRR389083 SRR389084
    ## colData names(21): project sample ... title characteristics

    ## This is the sample phenotype data provided by the recount project
    colData(rse_gene)

    ## DataFrame with 12 rows and 21 columns
    ##               project      sample  experiment         run
    ##           <character> <character> <character> <character>
    ## SRR387777   SRP009615   SRS281685   SRX110461   SRR387777
    ## SRR387778   SRP009615   SRS281686   SRX110462   SRR387778
    ## SRR387779   SRP009615   SRS281687   SRX110463   SRR387779
    ## SRR387780   SRP009615   SRS281688   SRX110464   SRR387780
    ## SRR389077   SRP009615   SRS282369   SRX111299   SRR389077
    ## ...               ...         ...         ...         ...
    ## SRR389080   SRP009615   SRS282372   SRX111302   SRR389080
    ## SRR389081   SRP009615   SRS282373   SRX111303   SRR389081
    ## SRR389082   SRP009615   SRS282374   SRX111304   SRR389082
    ## SRR389083   SRP009615   SRS282375   SRX111305   SRR389083
    ## SRR389084   SRP009615   SRS282376   SRX111306   SRR389084
    ##           read_count_as_reported_by_sra reads_downloaded
    ##                               <integer>        <integer>
    ## SRR387777                      30631853         30631853
    ## SRR387778                      37001306         37001306
    ## SRR387779                      40552001         40552001
    ## SRR387780                      32466352         32466352
    ## SRR389077                      27819603         27819603
    ## ...                                 ...              ...
    ## SRR389080                      34856203         34856203
    ## SRR389081                      23351679         23351679
    ## SRR389082                      18144828         18144828
    ## SRR389083                      24417368         24417368
    ## SRR389084                      23060084         23060084
    ##           proportion_of_reads_reported_by_sra_downloaded paired_end
    ##                                                <numeric>  <logical>
    ## SRR387777                                              1      FALSE
    ## SRR387778                                              1      FALSE
    ## SRR387779                                              1      FALSE
    ## SRR387780                                              1      FALSE
    ## SRR389077                                              1      FALSE
    ## ...                                                  ...        ...
    ## SRR389080                                              1      FALSE
    ## SRR389081                                              1      FALSE
    ## SRR389082                                              1      FALSE
    ## SRR389083                                              1      FALSE
    ## SRR389084                                              1      FALSE
    ##           sra_misreported_paired_end mapped_read_count        auc
    ##                            <logical>         <integer>  <numeric>
    ## SRR387777                      FALSE          28798572 1029494445
    ## SRR387778                      FALSE          33170281 1184877985
    ## SRR387779                      FALSE          37322762 1336528969
    ## SRR387780                      FALSE          29970735 1073178116
    ## SRR389077                      FALSE          24966859  893978355
    ## ...                              ...               ...        ...
    ## SRR389080                      FALSE          32469994 1163527939
    ## SRR389081                      FALSE          21904197  781685955
    ## SRR389082                      FALSE          17199795  616048853
    ## SRR389083                      FALSE          22499386  806323346
    ## SRR389084                      FALSE          21957003  787795710
    ##           sharq_beta_tissue sharq_beta_cell_type biosample_submission_date
    ##                 <character>          <character>               <character>
    ## SRR387777             blood                 k562    2011-12-05T15:40:03...
    ## SRR387778             blood                 k562    2011-12-05T15:40:03...
    ## SRR387779             blood                 k562    2011-12-05T15:40:03...
    ## SRR387780             blood                 k562    2011-12-05T15:40:03...
    ## SRR389077             blood                 k562    2011-12-13T11:26:05...
    ## ...                     ...                  ...                       ...
    ## SRR389080             blood                 k562    2011-12-13T11:26:05...
    ## SRR389081             blood                 k562    2011-12-13T11:26:05...
    ## SRR389082             blood                 k562    2011-12-13T11:26:05...
    ## SRR389083             blood                 k562    2011-12-13T11:26:05...
    ## SRR389084             blood                 k562    2011-12-13T11:26:05...
    ##           biosample_publication_date  biosample_update_date avg_read_length
    ##                          <character>            <character>       <integer>
    ## SRR387777     2011-12-07T09:29:59... 2014-08-27T04:18:20...              36
    ## SRR387778     2011-12-07T09:29:59... 2014-08-27T04:18:21...              36
    ## SRR387779     2011-12-07T09:29:59... 2014-08-27T04:18:21...              36
    ## SRR387780     2011-12-07T09:29:59... 2014-08-27T04:18:22...              36
    ## SRR389077     2011-12-13T11:26:06... 2014-08-27T04:22:14...              36
    ## ...                              ...                    ...             ...
    ## SRR389080     2011-12-13T11:26:06... 2014-08-27T04:22:15...              36
    ## SRR389081     2011-12-13T11:26:06... 2014-08-27T04:22:16...              36
    ## SRR389082     2011-12-13T11:26:06... 2014-08-27T04:22:16...              36
    ## SRR389083     2011-12-13T11:26:06... 2014-08-27T04:22:17...              36
    ## SRR389084     2011-12-13T11:26:06... 2014-08-27T04:22:17...              36
    ##           geo_accession  bigwig_file                  title
    ##             <character>  <character>            <character>
    ## SRR387777     GSM836270 SRR387777.bw K562 cells with shRN..
    ## SRR387778     GSM836271 SRR387778.bw K562 cells with shRN..
    ## SRR387779     GSM836272 SRR387779.bw K562 cells with shRN..
    ## SRR387780     GSM836273 SRR387780.bw K562 cells with shRN..
    ## SRR389077     GSM847561 SRR389077.bw K562 cells with shRN..
    ## ...                 ...          ...                    ...
    ## SRR389080     GSM847564 SRR389080.bw K562 cells with shRN..
    ## SRR389081     GSM847565 SRR389081.bw K562 cells with shRN..
    ## SRR389082     GSM847566 SRR389082.bw K562 cells with shRN..
    ## SRR389083     GSM847567 SRR389083.bw K562 cells with shRN..
    ## SRR389084     GSM847568 SRR389084.bw K562 cells with shRN..
    ##                                                         characteristics
    ##                                                         <CharacterList>
    ## SRR387777         cells: K562,shRNA expression: no,treatment: Puromycin
    ## SRR387778     cells: K562,shRNA expression: ye..,treatment: Puromycin..
    ## SRR387779         cells: K562,shRNA expression: no,treatment: Puromycin
    ## SRR387780     cells: K562,shRNA expression: ye..,treatment: Puromycin..
    ## SRR389077   cell line: K562,shRNA expression: no..,treatment: Puromycin
    ## ...                                                                 ...
    ## SRR389080 cell line: K562,shRNA expression: ex..,treatment: Puromycin..
    ## SRR389081   cell line: K562,shRNA expression: no..,treatment: Puromycin
    ## SRR389082 cell line: K562,shRNA expression: ex..,treatment: Puromycin..
    ## SRR389083   cell line: K562,shRNA expression: no..,treatment: Puromycin
    ## SRR389084 cell line: K562,shRNA expression: ex..,treatment: Puromycin..

    ## At the gene level, the row data includes the gene Gencode ids, the gene
    ## symbols and the sum of the disjoint exons widths, which can be used for
    ## taking into account the gene length.
    rowData(rse_gene)

    ## DataFrame with 58037 rows and 3 columns
    ##                               gene_id bp_length          symbol
    ##                           <character> <integer> <CharacterList>
    ## ENSG00000000003.14 ENSG00000000003.14      4535          TSPAN6
    ## ENSG00000000005.5   ENSG00000000005.5      1610            TNMD
    ## ENSG00000000419.12 ENSG00000000419.12      1207            DPM1
    ## ENSG00000000457.13 ENSG00000000457.13      6883           SCYL3
    ## ENSG00000000460.16 ENSG00000000460.16      5967        C1orf112
    ## ...                               ...       ...             ...
    ## ENSG00000283695.1   ENSG00000283695.1        61              NA
    ## ENSG00000283696.1   ENSG00000283696.1       997              NA
    ## ENSG00000283697.1   ENSG00000283697.1      1184           HSFX3
    ## ENSG00000283698.1   ENSG00000283698.1       940              NA
    ## ENSG00000283699.1   ENSG00000283699.1        60         MIR4481

    ## At the exon level, you can get the gene Gencode ids from the names of:
    # rowRanges(rse_exon)

## 4.2 Finding phenotype information

Once we have identified the study of interest, we can use the `browse_study()` function to browse the study at the SRA website.

    ## Browse the project at SRA
    browse_study(project_info$project)

The SRA website includes an Experiments link which further describes each of the samples. From the information available for SRP009615 at NCBI we have some further sample information that we can save for use in our differential expression analysis. We can get some of this information from GEO. The function `find_geo()` finds the GEO accession id for a given SRA run accession id, which we can then use with `geo_info()` and `geo_characteristics()` to parse this information. The `rse_gene` object already has some of this information.

    ## View GEO ids
    colData(rse_gene)$geo_accession

    ##  [1] "GSM836270" "GSM836271" "GSM836272" "GSM836273" "GSM847561" "GSM847562"
    ##  [7] "GSM847563" "GSM847564" "GSM847565" "GSM847566" "GSM847567" "GSM847568"

    ## Extract the sample characteristics
    geochar <- lapply(split(colData(rse_gene), seq_len(nrow(colData(rse_gene)))), geo_characteristics)

    ## Note that the information for this study is a little inconsistent, so we
    ## have to fix it.
    geochar <- do.call(rbind, lapply(geochar, function(x) {
        if ("cells" %in% colnames(x)) {
            colnames(x)[colnames(x) == "cells"] <- "cell.line"
            return(x)
        } else {
            return(x)
        }
    }))

    ## We can now define some sample information to use
    sample_info <- data.frame(
        run = colData(rse_gene)$run,
        group = ifelse(grepl("uninduced", colData(rse_gene)$title), "uninduced", "induced"),
        gene_target = sapply(colData(rse_gene)$title, function(x) {
            strsplit(strsplit(
                x,
                "targeting "
            )[[1]][2], " gene")[[1]][1]
        }),
        cell.line = geochar$cell.line
    )

## 4.3 Predicted phenotype information

Shannon Ellis et at have predicted phenotypic information that can be used with any data from the recount project thanks to `add_predictions()`. Check that function for more details (Ellis, Collado-Torres, Jaffe, and Leek, 2018).

## 4.4 DE analysis

The recount project records the sum of the base level coverage for each gene (or exon). These raw counts have to be scaled and there are several ways in which you can choose to do so. The function `scale_counts()` helps you scale them in a way that is tailored to Rail-RNA output. If you prefer read counts without scaling, check the function `read_counts()`. Below we show some of the differences.

    ## Scale counts by taking into account the total coverage per sample
    rse <- scale_counts(rse_gene)

    ##### Details about counts #####

    ## Scale counts to 40 million mapped reads. Not all mapped reads are in exonic
    ## sequence, so the total is not necessarily 40 million.
    colSums(assays(rse)$counts) / 1e6

    ## SRR387777 SRR387778 SRR387779 SRR387780 SRR389077 SRR389078 SRR389079 SRR389080
    ##  30.26702  29.07199  35.38355  34.65798  23.36050  22.62014  34.74629  35.20971
    ## SRR389081 SRR389082 SRR389083 SRR389084
    ##  33.41459  36.78133  34.05013  33.95469

    ## Compute read counts
    rse_read_counts <- read_counts(rse_gene)
    ## Difference between read counts and number of reads downloaded by Rail-RNA
    colSums(assays(rse_read_counts)$counts) / 1e6 -
        colData(rse_read_counts)$reads_downloaded / 1e6

    ##  SRR387777  SRR387778  SRR387779  SRR387780  SRR389077  SRR389078  SRR389079
    ##  -8.839994 -12.892541  -7.536284  -6.497571 -13.239233 -15.816168 -14.775568
    ##  SRR389080  SRR389081  SRR389082  SRR389083  SRR389084
    ##  -6.274001  -5.054220  -2.328694  -5.265160  -4.421728

    ## Check the help page for read_counts() for more details

We are almost ready to perform our differential expression analysis. Lets just add the information we recovered GEO about these samples.

    ## Add sample information for DE analysis
    colData(rse)$group <- sample_info$group
    colData(rse)$gene_target <- sample_info$gene_target

Now that the RangedSummarizedExperiment is complete, we can use DESeq2 or another package to perform the differential expression test. Note that you can use DEFormats for switching between formats if you want to use another package, like edgeR.

In this particular analysis, we’ll test whether there is a group difference adjusting for the gene target.

    ## Perform differential expression analysis with DESeq2
    library("DESeq2")

    ## Specify design and switch to DESeq2 format
    dds <- DESeqDataSet(rse, ~ gene_target + group)

    ## converting counts to integer mode

    ## Warning in DESeqDataSet(rse, ~gene_target + group): some variables in design
    ## formula are characters, converting to factors

    ## Perform DE analysis
    dds <- DESeq(dds, test = "LRT", reduced = ~gene_target, fitType = "local")

    ## estimating size factors

    ## estimating dispersions

    ## gene-wise dispersion estimates

    ## mean-dispersion relationship

    ## final dispersion estimates

    ## fitting model and testing

    res <- results(dds)

We can now use functions from DESeq2 to explore the results. For more details check the DESeq2 vignette. For example, we can make a MA plot as shown in Figure 1.

    ## Explore results
    plotMA(res, main = "DESeq2 results for SRP009615")

Figure 1: MA plot for group differences adjusted by gene target for SRP009615 using gene-level data

## 4.5 Report results

We can also use the regionReport package to generate interactive HTML reports exploring the DESeq2 results (or edgeR results if you used that package).

    ## Make a report with the results
    library("regionReport")
    report <- DESeq2Report(dds,
        res = res, project = "SRP009615",
        intgroup = c("group", "gene_target"), outdir = ".",
        output = "SRP009615-results", nBest = 10, nBestFeatures = 2
    )

    ## Loading required package: limma

    ##
    ## Attaching package: 'limma'

    ## The following object is masked from 'package:DESeq2':
    ##
    ##     plotMA

    ## The following object is masked from 'package:BiocGenerics':
    ##
    ##     plotMA

    ## Writing 9 Bibtex entries ... OK
    ## Results written to file './SRP009615-results.bib'
    ## processing file: SRP009615-results.Rmd

    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter
    ## Warning in doTryCatch(return(expr), name, parentenv, handler): "alpha" is not a graphical parameter

    ## output file: SRP009615-results.knit.md
    ##
    ## Output created: SRP009615-results.html

You can view the final report here.

## 4.6 Finding gene names

The gene Gencode ids are included in several objects in `recount`. With these ids you can find the gene symbols, gene names and other information. The org.Hs.eg.db is useful for finding this information and the following code shows how to get the gene names and symbols.

    ## Load required library
    library("org.Hs.eg.db")

    ## Loading required package: AnnotationDbi

    ##

    ## Extract Gencode gene ids
    gencode <- gsub("\\..*", "", names(recount_genes))

    ## Find the gene information we are interested in
    gene_info <- select(org.Hs.eg.db, gencode, c(
        "ENTREZID", "GENENAME", "SYMBOL",
        "ENSEMBL"
    ), "ENSEMBL")

    ## 'select()' returned many:many mapping between keys and columns

    ## Explore part of the results
    dim(gene_info)

    ## [1] 61222     4

    head(gene_info)

    ##           ENSEMBL ENTREZID                                                    GENENAME SYMBOL
    ## 1 ENSG00000000003     7105                                               tetraspanin 6 TSPAN6
    ## 2 ENSG00000000005    64102                                                 tenomodulin   TNMD
    ## 3 ENSG00000000419     8813 dolichyl-phosphate mannosyltransferase subunit 1, catalytic   DPM1
    ## 4 ENSG00000000457    57147                                    SCY1 like pseudokinase 3  SCYL3
    ## 5 ENSG00000000460    55732   FIGNL1 interacting regulator of recombination and mitosis  FIRRM
    ## 6 ENSG00000000938     2268              FGR proto-oncogene, Src family tyrosine kinase    FGR

# 5 Sample derfinder analysis

The recount project also hosts for each project sample coverage bigWig files created by Rail-RNA and a mean coverage bigWig file. For the mean coverage bigWig file, all samples were normalized to libraries of 40 million reads, each a 100 base-pairs long. recount can be used along with derfinder (Collado-Torres, Nellore, Frazee et al., 2017) to identify expressed regions from the data. This type of analysis is annotation-agnostic which can be advantageous. The following subsections illustrate this type of analysis.

## 5.1 Define expressed regions

For an annotation-agnostic differential expression analysis, we first need to define the regions of interest. With recount we can do so using the `expressed_regions()` function as shown below for the same study we studied earlier.

    ## Normally, one can use rtracklayer::import() to access remote parts of BigWig
    ## files without having to download the complete files. However, as of
    ## 2024-05-20 this doesn't seem to be working well. So this is a workaround to
    ## issue https://github.com/lawremi/rtracklayer/issues/83
    download_study("SRP009615", type = "mean")

    ## 2025-06-04 21:35:03.364091 downloading file mean_SRP009615.bw to SRP009615/bw

    download_study("SRP009615", type = "samples")

    ## 2025-06-04 21:35:27.901243 downloading file SRR387777.bw to SRP009615/bw

    ## 2025-06-04 21:35:29.859629 downloading file SRR387778.bw to SRP009615/bw

    ## 2025-06-04 21:35:32.933299 downloading file SRR387779.bw to SRP009615/bw

    ## 2025-06-04 21:35:35.007195 downloading file SRR387780.bw to SRP009615/bw

    ## 2025-06-04 21:35:37.085722 downloading file SRR389077.bw to SRP009615/bw

    ## 2025-06-04 21:35:39.156918 downloading file SRR389078.bw to SRP009615/bw

    ## 2025-06-04 21:35:40.9194 downloading file SRR389079.bw to SRP009615/bw

    ## 2025-06-04 21:35:43.164175 downloading file SRR389080.bw to SRP009615/bw

    ## 2025-06-04 21:35:45.499123 downloading file SRR389081.bw to SRP009615/bw

    ## 2025-06-04 21:35:47.045057 downloading file SRR389082.bw to SRP009615/bw

    ## 2025-06-04 21:35:48.468436 downloading file SRR389083.bw to SRP009615/bw

    ## 2025-06-04 21:35:50.483606 downloading file SRR389084.bw to SRP009615/bw

    ## Define expressed regions for study SRP009615, only for chromosome Y
    regions <- expressed_regions("SRP009615", "chrY",
        cutoff = 5L,
        maxClusterGap = 3000L, outdir = "SRP009615"
    )

    ## Warning in derfinder::loadCoverage(files = meanFile, chr = chr, chrlen = chrlen): As of rtracklayer 1.25.16, BigWig is
    ## not supported on Windows. Thus loading data from BigWig files will most likely fail!

    ## 2025-06-04 21:35:52.061312 loadCoverage: loading BigWig file SRP009615/bw/mean_SRP009615.bw

    ## 2025-06-04 21:35:52.302155 loadCoverage: applying the cutoff to the merged data

    ## 2025-06-04 21:35:52.896774 filterData: originally there were 57227415 rows, now there are 57227415 rows. Meaning that 0 percent was filtered.

    ## 2025-06-04 21:35:52.902843 findRegions: identifying potential segments

    ## 2025-06-04 21:35:52.911116 findRegions: segmenting information

    ## 2025-06-04 21:35:52.912293 .getSegmentsRle: segmenting with cutoff(s) 5

    ## 2025-06-04 21:35:53.002049 findRegions: identifying candidate regions

    ## 2025-06-04 21:35:54.805808 findRegions: identifying region clusters

    ## Briefly explore the resulting regions
    regions

    ## GRanges object with 808 ranges and 6 metadata columns:
    ##       seqnames            ranges strand |     value      area indexStart  indexEnd cluster clusterL
    ##          <Rle>         <IRanges>  <Rle> | <numeric> <numeric>  <integer> <integer>   <Rle>    <Rle>
    ##     1     chrY   2929794-2929829      * |  14.72650   530.154    2929794   2929829       1       36
    ##     2     chrY   2956678-2956701      * |  12.81063   307.455    2956678   2956701       2       24
    ##     3     chrY   2977203-2977227      * |   5.34908   133.727    2977203   2977227       3     2750
    ##     4     chrY   2977957-2977994      * |   6.46977   245.851    2977957   2977994       3     2750
    ##     5     chrY   2978850-2978871      * |   5.79766   127.548    2978850   2978871       3     2750
    ##   ...      ...               ...    ... .       ...       ...        ...       ...     ...      ...
    ##   804     chrY 26614511-26614546      * |   7.28189  262.1482   26614511  26614546     224      298
    ##   805     chrY 26614548-26614553      * |   5.48768   32.9261   26614548  26614553     224      298
    ##   806     chrY 26614779-26614808      * |   6.64339  199.3018   26614779  26614808     224      298
    ##   807     chrY 26626808-26626848      * |  12.60382  516.7564   26626808  26626848     225      221
    ##   808     chrY 26626971-26627028      * |  14.16734  821.7055   26626971  26627028     225      221
    ##   -------
    ##   seqinfo: 1 sequence from an unspecified genome

Once the regions have been defined, you can export them into a BED file using rtracklayer or other file formats.

## 5.2 Compute coverage matrix

Having defined the expressed regions, we can now compute a coverage matrix for these regions. We can do so using the function `coverage_matrix()` from recount as shown below. It returns a RangedSummarizedExperiment object.

    ## Compute coverage matrix for study SRP009615, only for chromosome Y
    system.time(rse_ER <- coverage_matrix("SRP009615", "chrY", regions, outdir = "SRP009615"))

    ## 2025-06-04 21:35:56.398631 downloading file SRP009615.tsv to SRP009615

    ## 2025-06-04 21:35:56.811761 railMatrix: processing regions 1 to 808

    ## 2025-06-04 21:35:56.829627 railMatrix: processing file SRP009615/bw/SRR387777.bw

    ## 2025-06-04 21:35:57.045017 railMatrix: processing file SRP009615/bw/SRR387778.bw

    ## 2025-06-04 21:35:57.201014 railMatrix: processing file SRP009615/bw/SRR387779.bw

    ## 2025-06-04 21:35:57.362495 railMatrix: processing file SRP009615/bw/SRR387780.bw

    ## 2025-06-04 21:35:57.515259 railMatrix: processing file SRP009615/bw/SRR389077.bw

    ## 2025-06-04 21:35:57.670031 railMatrix: processing file SRP009615/bw/SRR389078.bw

    ## 2025-06-04 21:35:57.830328 railMatrix: processing file SRP009615/bw/SRR389079.bw

    ## 2025-06-04 21:35:57.970988 railMatrix: processing file SRP009615/bw/SRR389080.bw

    ## 2025-06-04 21:35:58.126256 railMatrix: processing file SRP009615/bw/SRR389081.bw

    ## 2025-06-04 21:35:58.457749 railMatrix: processing file SRP009615/bw/SRR389082.bw

    ## 2025-06-04 21:35:58.608848 railMatrix: processing file SRP009615/bw/SRR389083.bw

    ## 2025-06-04 21:35:58.770504 railMatrix: processing file SRP009615/bw/SRR389084.bw

    ##    user  system elapsed
    ##    1.89    0.17    2.61

    ## Explore the RSE a bit
    dim(rse_ER)

    ## [1] 808  12

    rse_ER

    ## class: RangedSummarizedExperiment
    ## dim: 808 12
    ## metadata(0):
    ## assays(1): counts
    ## rownames(808): 1 2 ... 807 808
    ## rowData names(6): value area ... cluster clusterL
    ## colnames(12): SRR387777 SRR387778 ... SRR389083 SRR389084
    ## colData names(21): project sample ... title characteristics

The resulting count matrix has one row per region and one column per sample. The counts correspond to the number (or fraction) of reads overlapping the regions and are scaled by default to a library size of 40 million reads. For some differential expression methods, you might have to round this matrix into integers. We’ll use DESeq2 to identify which expressed regions are differentially expressed.

    ## Round the coverage matrix to integers
    covMat <- round(assays(rse_ER)$counts, 0)

You can use `scale = FALSE` if you want the raw base-pair coverage counts and then scale them with `scale_counts()`. If you want integer counts, use `round = TRUE`.

## 5.3 Construct a `DESeqDataSet` object

We first need to get some phenotype information for these samples similar to the first analysis we did. We can get this data using `download_study()`.

    ## Get phenotype data for study SRP009615
    pheno <- colData(rse_ER)

    ## Complete the phenotype table with the data we got from GEO
    m <- match(pheno$run, sample_info$run)
    pheno <- cbind(pheno, sample_info[m, 2:3])

    ## Explore the phenotype data a little bit
    head(pheno)

    ## DataFrame with 6 rows and 23 columns
    ##               project      sample  experiment         run read_count_as_reported_by_sra reads_downloaded
    ##           <character> <character> <character> <character>                     <integer>        <integer>
    ## SRR387777   SRP009615   SRS281685   SRX110461   SRR387777                      30631853         30631853
    ## SRR387778   SRP009615   SRS281686   SRX110462   SRR387778                      37001306         37001306
    ## SRR387779   SRP009615   SRS281687   SRX110463   SRR387779                      40552001         40552001
    ## SRR387780   SRP009615   SRS281688   SRX110464   SRR387780                      32466352         32466352
    ## SRR389077   SRP009615   SRS282369   SRX111299   SRR389077                      27819603         27819603
    ## SRR389078   SRP009615   SRS282370   SRX111300   SRR389078                      31758658         31758658
    ##           proportion_of_reads_reported_by_sra_downloaded paired_end sra_misreported_paired_end mapped_read_count
    ##                                                <integer>  <logical>                  <logical>         <integer>
    ## SRR387777                                              1      FALSE                      FALSE          28798572
    ## SRR387778                                              1      FALSE                      FALSE          33170281
    ## SRR387779                                              1      FALSE                      FALSE          37322762
    ## SRR387780                                              1      FALSE                      FALSE          29970735
    ## SRR389077                                              1      FALSE                      FALSE          24966859
    ## SRR389078                                              1      FALSE                      FALSE          28190059
    ##                  auc sharq_beta_tissue sharq_beta_cell_type biosample_submission_date biosample_publication_date
    ##            <integer>       <character>          <character>               <character>                <character>
    ## SRR387777 1029494445             blood                 k562    2011-12-05T15:40:03...     2011-12-07T09:29:59...
    ## SRR387778 1184877985             blood                 k562    2011-12-05T15:40:03...     2011-12-07T09:29:59...
    ## SRR387779 1336528969             blood                 k562    2011-12-05T15:40:03...     2011-12-07T09:29:59...
    ## SRR387780 1073178116             blood                 k562    2011-12-05T15:40:03...     2011-12-07T09:29:59...
    ## SRR389077  893978355             blood                 k562    2011-12-13T11:26:05...     2011-12-13T11:26:06...
    ## SRR389078 1009216922             blood                 k562    2011-12-13T11:26:05...     2011-12-13T11:26:06...
    ##            biosample_update_date avg_read_length geo_accession  bigwig_file                  title
    ##                      <character>       <integer>   <character>  <character>            <character>
    ## SRR387777 2014-08-27T04:18:20...              36     GSM836270 SRR387777.bw K562 cells with shRN..
    ## SRR387778 2014-08-27T04:18:21...              36     GSM836271 SRR387778.bw K562 cells with shRN..
    ## SRR387779 2014-08-27T04:18:21...              36     GSM836272 SRR387779.bw K562 cells with shRN..
    ## SRR387780 2014-08-27T04:18:22...              36     GSM836273 SRR387780.bw K562 cells with shRN..
    ## SRR389077 2014-08-27T04:22:14...              36     GSM847561 SRR389077.bw K562 cells with shRN..
    ## SRR389078 2014-08-27T04:22:15...              36     GSM847562 SRR389078.bw K562 cells with shRN..
    ##                  characteristics       group gene_target
    ##                      <character> <character> <character>
    ## SRR387777 c("cells: K562", "sh..   uninduced         SRF
    ## SRR387778 c("cells: K562", "sh..     induced         SRF
    ## SRR387779 c("cells: K562", "sh..   uninduced         SRF
    ## SRR387780 c("cells: K562", "sh..     induced         SRF
    ## SRR389077 c("cell line: K562",..   uninduced        EGR1
    ## SRR389078 c("cell line: K562",..     induced        EGR1

Now that we have the necessary data, we can construct a `DESeqDataSet` object using the function `DESeqDataSetFromMatrix()` from DESeq2.

    ## Build a DESeqDataSet
    dds_ers <- DESeqDataSetFromMatrix(
        countData = covMat, colData = pheno,
        design = ~ gene_target + group
    )

    ## converting counts to integer mode

    ## Warning in DESeqDataSet(se, design = design, ignoreRank): some variables in design formula are characters, converting
    ## to factors

## 5.4 DESeq2 analysis

With the `DESeqDataSet` object in place, we can then use the function `DESeq()` from DESeq2 to perform the differential expression analysis (between groups) as shown below.

    ## Perform differential expression analysis with DESeq2 at the ER-level
    dds_ers <- DESeq(dds_ers,
        test = "LRT", reduced = ~gene_target,
        fitType = "local"
    )

    ## estimating size factors

    ## estimating dispersions

    ## gene-wise dispersion estimates

    ## mean-dispersion relationship

    ## final dispersion estimates

    ## fitting model and testing

    res_ers <- results(dds_ers)

We can then visually explore the results as shown in Figure 2, like we did before in Figure 1.

    ## Explore results
    plotMA(res_ers, main = "DESeq2 results for SRP009615 (ER-level, chrY)")

Figure 2: MA plot for group differences adjusted by gene target for SRP009615 using ER-level data (just chrY)

We can also use regionReport to create a more extensive exploratory report.

    ## Create the report
    report2 <- DESeq2Report(dds_ers,
        res = res_ers,
        project = "SRP009615 (ER-level, chrY)",
        intgroup = c("group", "gene_target"), outdir = ".",
        output = "SRP009615-results-ER-level-chrY"
    )

# 6 Annotation used

This section describes the annotation used in `recount`.

We used the comprehensive gene annotation for (`CHR` regions) from Gencode v25 (GRCh38.p7) to get the list of genes. Specifically this GFF3 file. We then used the org.Hs.eg.db package to get the gene symbols. For each gene, we also counted the total length of exonic base pairs for that given gene and stored this information in the `bp_length` column. You can see below this information for the `rse_gene` object included in recount. The `rownames()` are the Gencode `gene_id`.

    ## Gene annotation information
    rowRanges(rse_gene_SRP009615)

    ## GRanges object with 58037 ranges and 3 metadata columns:
    ##                      seqnames              ranges strand |            gene_id bp_length          symbol
    ##                         <Rle>           <IRanges>  <Rle> |        <character> <integer> <CharacterList>
    ##   ENSG00000000003.14     chrX 100627109-100639991      - | ENSG00000000003.14      4535          TSPAN6
    ##    ENSG00000000005.5     chrX 100584802-100599885      + |  ENSG00000000005.5      1610            TNMD
    ##   ENSG00000000419.12    chr20   50934867-50958555      - | ENSG00000000419.12      1207            DPM1
    ##   ENSG00000000457.13     chr1 169849631-169894267      - | ENSG00000000457.13      6883           SCYL3
    ##   ENSG00000000460.16     chr1 169662007-169854080      + | ENSG00000000460.16      5967        C1orf112
    ##                  ...      ...                 ...    ... .                ...       ...             ...
    ##    ENSG00000283695.1    chr19   52865369-52865429      - |  ENSG00000283695.1        61            <NA>
    ##    ENSG00000283696.1     chr1 161399409-161422424      + |  ENSG00000283696.1       997            <NA>
    ##    ENSG00000283697.1     chrX 149548210-149549852      - |  ENSG00000283697.1      1184           HSFX3
    ##    ENSG00000283698.1     chr2 112439312-112469687      - |  ENSG00000283698.1       940            <NA>
    ##    ENSG00000283699.1    chr10   12653138-12653197      - |  ENSG00000283699.1        60         MIR4481
    ##   -------
    ##   seqinfo: 25 sequences (1 circular) from an unspecified genome; no seqlengths

    ## Also accessible via
    rowData(rse_gene_SRP009615)

    ## DataFrame with 58037 rows and 3 columns
    ##                               gene_id bp_length          symbol
    ##                           <character> <integer> <CharacterList>
    ## ENSG00000000003.14 ENSG00000000003.14      4535          TSPAN6
    ## ENSG00000000005.5   ENSG00000000005.5      1610            TNMD
    ## ENSG00000000419.12 ENSG00000000419.12      1207            DPM1
    ## ENSG00000000457.13 ENSG00000000457.13      6883           SCYL3
    ## ENSG00000000460.16 ENSG00000000460.16      5967        C1orf112
    ## ...                               ...       ...             ...
    ## ENSG00000283695.1   ENSG00000283695.1        61              NA
    ## ENSG00000283696.1   ENSG00000283696.1       997              NA
    ## ENSG00000283697.1   ENSG00000283697.1      1184           HSFX3
    ## ENSG00000283698.1   ENSG00000283698.1       940              NA
    ## ENSG00000283699.1   ENSG00000283699.1        60         MIR4481

For an `rse_exon` object, the `rownames()` correspond to the Gencode `gene_id`. You can add a `gene_id` column if you are interested in subsetting the whole `rse_exon` object.

    ## Get the rse_exon object for study SRP009615
    download_study("SRP009615", type = "rse-exon")

    ## 2025-06-04 21:36:03.158893 downloading file rse_exon.Rdata to SRP009615

    load(file.path("SRP009615", "rse_exon.Rdata"))

    ## Annotation information
    rowRanges(rse_exon)

    ## GRanges object with 603139 ranges and 0 metadata columns:
    ##                      seqnames              ranges strand
    ##                         <Rle>           <IRanges>  <Rle>
    ##   ENSG00000000003.14     chrX 100627109-100628669      -
    ##   ENSG00000000003.14     chrX 100628670-100629986      -
    ##   ENSG00000000003.14     chrX 100630759-100630866      -
    ##   ENSG00000000003.14     chrX 100632063-100632068      -
    ##   ENSG00000000003.14     chrX 100632485-100632540      -
    ##                  ...      ...                 ...    ...
    ##    ENSG00000283698.1     chr2 112440396-112440601      -
    ##    ENSG00000283698.1     chr2 112440602-112440611      -
    ##    ENSG00000283698.1     chr2 112463991-112464036      -
    ##    ENSG00000283698.1     chr2 112469548-112469687      -
    ##    ENSG00000283699.1    chr10   12653138-12653197      -
    ##   -------
    ##   seqinfo: 25 sequences (1 circular) from an unspecified genome; no seqlengths

    ## Add a gene_id column
    rowRanges(rse_exon)$gene_id <- rownames(rse_exon)

    ## Example subset
    rse_exon_subset <- subset(rse_exon, subset = gene_id == "ENSG00000000003.14")
    rowRanges(rse_exon_subset)

    ## GRanges object with 17 ranges and 1 metadata column:
    ##                      seqnames              ranges strand |            gene_id
    ##                         <Rle>           <IRanges>  <Rle> |        <character>
    ##   ENSG00000000003.14     chrX 100627109-100628669      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100628670-100629986      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100630759-100630866      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100632063-100632068      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100632485-100632540      - | ENSG00000000003.14
    ##                  ...      ...                 ...    ... .                ...
    ##   ENSG00000000003.14     chrX 100636608-100636689      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100636690-100636792      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100636793-100636806      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100636807-100637104      - | ENSG00000000003.14
    ##   ENSG00000000003.14     chrX 100639945-100639991      - | ENSG00000000003.14
    ##   -------
    ##   seqinfo: 25 sequences (1 circular) from an unspecified genome; no seqlengths

The exons in a `rse_exon` object are those that have a Gencode `gene_id` and that were disjointed as described in the GenomicRanges package:

    ?`inter-range-methods`

You can reproduce the gene and exon information using the function `reproduce_ranges()`.

## 6.1 Using another/newer annotation

If you are interested in using another annotation based on hg38 coordinates you can do so using the function `coverage_matrix()` or by running bwtool thanks to the BigWig files in `recount`, in which case recount.bwtool will be helpful.

If you are re-processing a small set of samples, it simply might be easier to use `coverage_matrix()` as shown below using the annotation information provided by the EnsDb.Hsapiens.v79 package.

    ## Get the disjoint exons based on EnsDb.Hsapiens.v79 which matches hg38
    exons <- reproduce_ranges("exon", db = "EnsDb.Hsapiens.v79")

    ## Change the chromosome names to match those used in the BigWig files
    library("GenomeInfoDb")
    seqlevelsStyle(exons) <- "UCSC"

    ## Warning in (function (seqlevels, genome, new_style) : cannot switch some GRCh38's seqlevels from NCBI to UCSC style

    ## Get the count matrix at the exon level for chrY
    exons_chrY <- keepSeqlevels(exons, "chrY", pruning.mode = "coarse")
    exonRSE <- coverage_matrix("SRP009615", "chrY", unlist(exons_chrY),
        chunksize = 3000, outdir = "SRP009615"
    )

    ## 2025-06-04 21:36:49.567893 railMatrix: processing regions 1 to 2562

    ## 2025-06-04 21:36:49.57735 railMatrix: processing file SRP009615/bw/SRR387777.bw

    ## 2025-06-04 21:36:49.868646 railMatrix: processing file SRP009615/bw/SRR387778.bw

    ## 2025-06-04 21:36:50.124381 railMatrix: processing file SRP009615/bw/SRR387779.bw

    ## 2025-06-04 21:36:50.392729 railMatrix: processing file SRP009615/bw/SRR387780.bw

    ## 2025-06-04 21:36:50.679353 railMatrix: processing file SRP009615/bw/SRR389077.bw

    ## 2025-06-04 21:36:50.947857 railMatrix: processing file SRP009615/bw/SRR389078.bw

    ## 2025-06-04 21:36:51.221338 railMatrix: processing file SRP009615/bw/SRR389079.bw

    ## 2025-06-04 21:36:51.472672 railMatrix: processing file SRP009615/bw/SRR389080.bw

    ## 2025-06-04 21:36:51.790822 railMatrix: processing file SRP009615/bw/SRR389081.bw

    ## 2025-06-04 21:36:52.029401 railMatrix: processing file SRP009615/bw/SRR389082.bw

    ## 2025-06-04 21:36:52.26694 railMatrix: processing file SRP009615/bw/SRR389083.bw

    ## 2025-06-04 21:36:52.538479 railMatrix: processing file SRP009615/bw/SRR389084.bw

    exonMatrix <- assays(exonRSE)$counts
    dim(exonMatrix)

    ## [1] 2562   12

    head(exonMatrix)

    ##   SRR387777 SRR387778 SRR387779 SRR387780 SRR389077 SRR389078 SRR389079 SRR389080 SRR389081 SRR389082 SRR389083
    ## 1         0         0         0         0         0         0 0.0000000 0.0000000         0         0         0
    ## 2         0         0         0         0         0         0 0.0000000 0.0000000         0         0         0
    ## 3         0         0         0         0         0         0 0.0000000 0.0000000         0         0         0
    ## 4         0         0         0         0         0         0 0.0000000 0.0000000         0         0         0
    ## 5         0         0         0         0         0         0 0.0000000 0.6875641         0         0         0
    ## 6         0         0         0         0         0         0 0.3256991 0.0000000         0         0         0
    ##   SRR389084
    ## 1         0
    ## 2         0
    ## 3         0
    ## 4         0
    ## 5         0
    ## 6         0

    ## Summary the information at the gene level for chrY
    exon_gene <- rep(names(exons_chrY), elementNROWS(exons_chrY))
    geneMatrix <- do.call(rbind, lapply(split(
        as.data.frame(exonMatrix),
        exon_gene
    ), colSums))
    dim(geneMatrix)

    ## [1] 544  12

    head(geneMatrix)

    ##                 SRR387777 SRR387778  SRR387779  SRR387780 SRR389077 SRR389078  SRR389079  SRR389080 SRR389081
    ## ENSG00000012817  9.791214 17.655826 17.8671773  6.7090447  4.832332  2.893332 12.7255290  8.1132560 16.988920
    ## ENSG00000067048 77.902314 69.981889 41.6900803 83.0430650 52.797699 52.000713 52.3677621 53.9737791 80.441512
    ## ENSG00000067646 44.371293 52.123510 22.6257722 57.2505152 44.251631 44.232314 31.5928125 56.0708495 38.480927
    ## ENSG00000092377 10.568294  9.722520 13.8867173 16.0271624 11.364928  1.426849 17.0061457 24.2022551 33.773154
    ## ENSG00000099715  3.613424  1.789214  0.6284937  2.6836179  2.997835  0.000000  0.8375120  0.0000000  1.023429
    ## ENSG00000099721  0.000000  0.000000  0.0000000  0.7827219  1.342314  0.000000  0.4652844  0.7563205  0.000000
    ##                  SRR389082 SRR389083 SRR389084
    ## ENSG00000012817  28.049724  8.830204  9.139425
    ## ENSG00000067048 106.485062 65.978494 34.679041
    ## ENSG00000067646  45.905450 35.469641 28.992288
    ## ENSG00000092377   9.349908  3.571768 16.450965
    ## ENSG00000099715   2.337477  0.000000  0.000000
    ## ENSG00000099721   0.000000  0.000000  0.000000

The above solution works well for a small set of samples. However, `bwtool` is faster for processing large sets. You can see how we used `bwtool` at leekgroup/recount-website. It’s much faster than R and the small package recount.bwtool will be helpful for such scenarios. Note that you will need to run `scale_counts()` after using `coverage_matrix_bwtool()` and that will have to download the BigWig files first unless you are working at JHPCE or SciServer. `coverage_matrix_bwtool()` will download the files for you, but that till take time.

Finally, the BigWig files hosted by recount have the following chromosome names and sizes as specified in hg38.sizes. You’ll have to make sure that you match these names when using alternative annotations.

# 7 Candidate gene fusions

If you are interested in finding possible gene fusion events in a particular study, you can download the RangedSummarizedExperiment object at the exon-exon junctions level for that study. The objects we provide classify exon-exon junction events as shown below.

    library("recount")

    ## Download and load RSE object for SRP009615 study
    download_study("SRP009615", type = "rse-jx")

    ## 2025-06-04 21:36:53.332942 downloading file rse_jx.Rdata to SRP009615

    load(file.path("SRP009615", "rse_jx.Rdata"))

    ## Delete it if you don't need it anymore
    unlink("SRP009615", recursive = TRUE)

    ## Exon-exon junctions by class
    table(rowRanges(rse_jx)$class)

    ##
    ## alternative_end       annotated       exon_skip          fusion           novel
    ##           35601          140251            9513             489           26475

    ## Potential gene fusions by chromosome
    fusions <- rowRanges(rse_jx)[rowRanges(rse_jx)$class == "fusion"]
    fusions_by_chr <- sort(table(seqnames(fusions)), decreasing = TRUE)
    fusions_by_chr[fusions_by_chr > 0]

    ##
    ##  chr1 chr19  chr6 chr12 chr22 chr17  chr5 chr16 chr11  chr3 chr10  chr2  chr7  chrX chr14  chr4  chr9  chr8 chr15 chr20
    ##    61    54    37    31    27    26    26    24    22    22    21    20    20    16    13    13    12    10     9     9
    ## chr13 chr21 chr18
    ##     6     6     4

    ## Genes with the most fusions
    head(sort(table(unlist(fusions$symbol_proposed)), decreasing = TRUE))

    ##
    ##      TMEM14B       SYCP2L LOC100129924        MATR3        ACSM3         BMI1
    ##            6            5            4            4            3            3

If you are interested in checking the frequency of a particular exon-exon junction then check the `snaptron_query()` function described in the following section.

# 8 Snaptron

Our collaborators built SnaptronUI to query the Intropolis database of the exon-exon junctions found in SRA. SnaptronUI allows you to do several types of queries manually and perform analyses. recount has the function `snaptron_query()` which uses Snaptron to check if particular exon-exon junctions are present in Intropolis. For example, here we use `snaptron_query()` to get in `R`-friendly format the information for 3 exon-exon junctions using Intropolis version 1 which uses hg19 coordinates. Version 2 uses hg38 coordinates and the exon-exon junctions were derived from a larger data set: about 50,000 samples vs 21,000 in version 1. `snaptron_query()` can also be used to access the 30 million and 36 million exon-exon junctions derived from the GTEx and TCGA consortiums respectively (about 10 and 11 thousand samples respectively).

    library("GenomicRanges")
    junctions <- GRanges(seqnames = "chr2", IRanges(
        start = c(28971711, 29555082, 29754983),
        end = c(29462418, 29923339, 29917715)
    ))

    snaptron_query(junctions)

    ## 2025-06-04 21:36:56.439165 querying Snaptron

    ## 2025-06-04 21:36:56.506155 processing results

    ## 2025-06-04 21:36:56.50786 found no exon-exon junctions in Intropolis version srav1 matching your query: this version uses hg19 coordinates.

    ## NULL

If you use `snaptron_query()` please cite snaptron.cs.jhu.edu. Snaptron is separate from recount. Thank you!

# 9 FANTOM-CAT annotation

Thanks to Imada, Sanchez, et al., bioRxiv, 2019 you can now use the `recount` package to access the FANTOM-CAT annotation that was merged with `recount2`. You can use the main `recount2` website or the `recount::download_study()` function by specifying `type = 'rse-fc'`. See their manuscript for further details on how this annotation was derived.

    ## Example use of download_study()
    ## for downloading the FANTOM-CAT `rse_fc`
    ## file for a given study
    download_study("DRP000366", type = "rse-fc", download = FALSE)

# 10 `recount-brain`

The `recount-brain` project by Ramzara et al., bioRxiv, 2019 contains curated metadata for brain studies present in `recount2` that you can access via `recount::add_metadata(source = 'recount_brain_v2')`. The manuscript by Razmara et al describes a curation process that can be used for curating other tissues or projects. If you are interested in doing such a project and/or contributing curated metadata to the `recount` package via the `add_metadata()` function please let us know.

    ## recount-brain citation details
    citation("recount")[5]

    ## Frazee AC, Langmead B, Leek JT (2011). "ReCount: A multi-experiment resource of analysis-ready RNA-seq gene
    ## count datasets." _BMC Bioinformatics_. doi:10.1186/1471-2105-12-449
    ## <https://doi.org/10.1186/1471-2105-12-449>, <https://doi.org/10.1186/1471-2105-12-449>.
    ##
    ## A BibTeX entry for LaTeX users is
    ##
    ##   @Article{,
    ##     title = {ReCount: A multi-experiment resource of analysis-ready RNA-seq gene count datasets},
    ##     author = {Alyssa C. Frazee and Ben Langmead and Jeffrey T. Leek},
    ##     year = {2011},
    ##     journal = {BMC Bioinformatics},
    ##     doi = {10.1186/1471-2105-12-449},
    ##     url = {https://doi.org/10.1186/1471-2105-12-449},
    ##   }

# 11 Download all the data

If you are interested in downloading all the data you can do so using the `recount_url` data.frame included in the package. That is:

    ## Get data.frame with all the URLs
    library("recount")
    dim(recount_url)

    ## [1] 97229     6

    ## Explore URLs
    head(recount_url$url)

    ## [1] "http://duffel.rail.bio/recount/v2/DRP000366/counts_exon.tsv.gz"
    ## [2] "http://duffel.rail.bio/recount/v2/DRP000366/counts_gene.tsv.gz"
    ## [3] "http://duffel.rail.bio/recount/v2/DRP000366/rse_exon.Rdata"
    ## [4] "http://duffel.rail.bio/recount/v2/DRP000366/rse_gene.Rdata"
    ## [5] "http://duffel.rail.bio/recount/DRP000366/counts_jx.tsv.gz"
    ## [6] "http://duffel.rail.bio/recount/DRP000366/rse_jx.Rdata"

You can then download all the data using the `download_study()` function or however you prefer to do so with `recount_url`.

    ## Download all files (will take a while! It's over 8 TB of data)
    sapply(unique(recount_url$project), download_study, type = "all")

You can find the code for the website at leekgroup/recount-website if you want to deploy your own local mirror. Please let us know if you choose to do deploy a mirror.

# 12 Accessing recount via SciServer

Not everyone has over 8 terabytes of disk space available to download all the data from the `recount` project. However, thanks to SciServer you can access it locally via a Jupyter Notebook. If you do so and want to share your work, please let the SciServer maintainers know via Twitter at IDIESJHU.

## 12.1 Step by step

To use SciServer, you first have to go to http://www.sciserver.org/ then click on “Login to SciServer”. If you are a first time user, click on “Register New Account” and enter the information they request as shown on Figure 3.

Figure 3: SIgn up to SciServer

Once you’ve registered, open the SciServer compute tool (see Figure 4).

Figure 4: Click on SciServer Compute,

Then click on “Create container”, choose a name of your preference and make sure that you choose to load R 3.3.x and the `recount` public volume (see Figure 5). This will enable you to access all of the `recount` data as if it was on your computer. Click “Create” once you are ready.

Figure 5: Select the appropriate image and load the recount public volume

Once you have a container, create a new R Notebook as shown in Figure 6.

Figure 6: Create a R notebook

In this R Notebook you can insert new code cells where you can type R code. For example, you can install recount and DESeq2 to run the code example from this vignette. You first have to install the packages as shown in Figure 7.

Figure 7: Install recount and DESeq2 on SciServer

Then, the main part when using SciServer is to use to remember that all the `recount` data is available locally. So instead of using `download_study()`, you can simply use `load()` with the correct path as shown in Figure 8.

Figure 8: recount files are available locally so remmeber to use the local data when working on SciServer

Several functions in the recount package have the `outdir` argument, which you can specify to use the data locally. Try using `expressed_regions()` in SciServer to get started with the following code:

    ## Expressed-regions SciServer example
    regions <- expressed_regions("SRP009615", "chrY",
        cutoff = 5L,
        maxClusterGap = 3000L, outdir = file.path(scipath, "SRP009615")
    )
    regions

You can find the R code for a full SciServer demo here. You can copy and paste it into a cell and run it all to see how SciServer compute works.

## 12.2 SciServer help

If you encounter problems when using SciServer please check their support page and the SciServer compute help section.

## 12.3 Citing SciServer

If you use SciServer for your published work, please cite it accordingly. SciServer is administered by the Institute for Data Intensive Engineering and Science at Johns Hopkins University and is funded by National Science Foundation award ACI-1261715.

# 13 Reproducibility

The recount package (Collado-Torres, Nellore, Kammers et al., 2017) was made possible thanks to:

- R (R Core Team, 2025)
- AnnotationDbi (Pagès, Carlson, Falcon, and Li, 2017)
- BiocParallel (Morgan, Wang, Obenchain, Lang, Thompson, and Turaga, 2025)
- BiocStyle (Oleś, 2025)
- derfinder (Collado-Torres, Nellore, Frazee et al., 2017)
- sessioninfo (Wickham, Chang, Flight, Müller, and Hester, 2025)
- downloader (Chang, 2025)
- EnsDb.Hsapiens.v79 (Rainer, 2017)
- GEOquery (Davis and Meltzer, 2007)
- GenomeInfoDb (Arora, Morgan, Carlson, and Pagès, 2017)
- GenomicFeatures (Lawrence, Huber, Pagès, Aboyoun, Carlson, Gentleman, Morgan, and Carey, 2013)
- GenomicRanges (Lawrence, Huber, Pagès et al., 2013)
- knitr (Xie, 2014)
- org.Hs.eg.db (Carlson, 2025)
- RCurl (Temple Lang, 2025)
- rentrez (Winter, 2017)
- RefManageR (McLean, 2017)
- rtracklayer (Lawrence, Gentleman, and Carey, 2009)
- rmarkdown (Allaire, Xie, Dervieux et al., 2024)
- S4Vectors (Pagès, Lawrence, and Aboyoun, 2017)
- SummarizedExperiment (Morgan, Obenchain, Hester et al., 2017)
- testthat (Wickham, 2011)

Code for creating the vignette

    ## Create the vignette
    library("rmarkdown")
    system.time(render("recount-quickstart.Rmd", "BiocStyle::html_document"))

    ## Extract the R code
    library("knitr")
    knit("recount-quickstart.Rmd", tangle = TRUE)

Date the vignette was generated.

    ## [1] "2025-06-04 21:36:57 EDT"

Wallclock time spent generating the vignette.

    ## Time difference of 3.567 mins

`R` session information.

    ## ─ Session info ───────────────────────────────────────────────────────────────────────────────────────────────────────
    ##  setting  value
    ##  version  R version 4.5.0 (2025-04-11 ucrt)
    ##  os       Windows Server 2022 x64 (build 20348)
    ##  system   x86_64, mingw32
    ##  ui       RTerm
    ##  language (EN)
    ##  collate  C
    ##  ctype    English_United States.utf8
    ##  tz       America/New_York
    ##  date     2025-06-04
    ##  pandoc   2.7.3 @ C:/PROGRA~1/Pandoc/ (via rmarkdown)
    ##  quarto   NA
    ##
    ## ─ Packages ───────────────────────────────────────────────────────────────────────────────────────────────────────────
    ##  package              * version   date (UTC) lib source
    ##  abind                  1.4-8     2024-09-12 [2] CRAN (R 4.5.0)
    ##  AnnotationDbi        * 1.71.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  AnnotationFilter       1.33.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  backports              1.5.0     2024-05-23 [2] CRAN (R 4.5.0)
    ##  base64enc              0.1-3     2015-07-28 [2] CRAN (R 4.5.0)
    ##  bibtex                 0.5.1     2023-01-26 [2] CRAN (R 4.5.0)
    ##  Biobase              * 2.69.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  BiocGenerics         * 0.55.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  BiocIO                 1.19.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  BiocManager            1.30.25   2024-08-28 [2] CRAN (R 4.5.0)
    ##  BiocParallel           1.43.3    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  BiocStyle            * 2.37.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  Biostrings             2.77.1    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  bit                    4.6.0     2025-03-06 [2] CRAN (R 4.5.0)
    ##  bit64                  4.6.0-1   2025-01-16 [2] CRAN (R 4.5.0)
    ##  bitops                 1.0-9     2024-10-03 [2] CRAN (R 4.5.0)
    ##  blob                   1.2.4     2023-03-17 [2] CRAN (R 4.5.0)
    ##  bookdown               0.43      2025-04-15 [2] CRAN (R 4.5.0)
    ##  BSgenome               1.77.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  bslib                  0.9.0     2025-01-30 [2] CRAN (R 4.5.0)
    ##  bumphunter             1.51.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  cachem                 1.1.0     2024-05-16 [2] CRAN (R 4.5.0)
    ##  checkmate              2.3.2     2024-07-29 [2] CRAN (R 4.5.0)
    ##  cli                    3.6.5     2025-04-23 [2] CRAN (R 4.5.0)
    ##  cluster                2.1.8.1   2025-03-12 [2] CRAN (R 4.5.0)
    ##  codetools              0.2-20    2024-03-31 [2] CRAN (R 4.5.0)
    ##  colorspace             2.1-1     2024-07-26 [2] CRAN (R 4.5.0)
    ##  crayon                 1.5.3     2024-06-20 [2] CRAN (R 4.5.0)
    ##  crosstalk              1.2.1     2023-11-23 [2] CRAN (R 4.5.0)
    ##  curl                   6.2.3     2025-05-24 [2] CRAN (R 4.5.0)
    ##  data.table             1.17.4    2025-05-26 [2] CRAN (R 4.5.0)
    ##  DBI                    1.2.3     2024-06-02 [2] CRAN (R 4.5.0)
    ##  DEFormats              1.37.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  DelayedArray           0.35.1    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  derfinder              1.43.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  derfinderHelper        1.43.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  DESeq2               * 1.49.1    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  dichromat              2.0-0.1   2022-05-02 [2] CRAN (R 4.5.0)
    ##  digest                 0.6.37    2024-08-19 [2] CRAN (R 4.5.0)
    ##  doRNG                  1.8.6.2   2025-04-02 [2] CRAN (R 4.5.0)
    ##  downloader             0.4.1     2025-03-26 [2] CRAN (R 4.5.0)
    ##  dplyr                  1.1.4     2023-11-17 [2] CRAN (R 4.5.0)
    ##  DT                   * 0.33      2024-04-04 [2] CRAN (R 4.5.0)
    ##  edgeR                * 4.7.2     2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  EnsDb.Hsapiens.v79     2.99.0    2025-04-18 [2] Bioconductor
    ##  ensembldb              2.33.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  evaluate               1.0.3     2025-01-10 [2] CRAN (R 4.5.0)
    ##  farver                 2.1.2     2024-05-13 [2] CRAN (R 4.5.0)
    ##  fastmap                1.2.0     2024-05-15 [2] CRAN (R 4.5.0)
    ##  foreach                1.5.2     2022-02-02 [2] CRAN (R 4.5.0)
    ##  foreign                0.8-90    2025-03-31 [2] CRAN (R 4.5.0)
    ##  Formula                1.2-5     2023-02-24 [2] CRAN (R 4.5.0)
    ##  generics             * 0.1.4     2025-05-09 [2] CRAN (R 4.5.0)
    ##  GenomeInfoDb         * 1.45.4    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  GenomicAlignments      1.45.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  GenomicFeatures        1.61.3    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  GenomicFiles           1.45.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  GenomicRanges        * 1.61.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  GEOquery               2.77.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  ggplot2              * 3.5.2     2025-04-09 [2] CRAN (R 4.5.0)
    ##  glue                   1.8.0     2024-09-30 [2] CRAN (R 4.5.0)
    ##  gridExtra              2.3       2017-09-09 [2] CRAN (R 4.5.0)
    ##  gtable                 0.3.6     2024-10-25 [2] CRAN (R 4.5.0)
    ##  Hmisc                  5.2-3     2025-03-16 [2] CRAN (R 4.5.0)
    ##  hms                    1.1.3     2023-03-21 [2] CRAN (R 4.5.0)
    ##  htmlTable              2.4.3     2024-07-21 [2] CRAN (R 4.5.0)
    ##  htmltools              0.5.8.1   2024-04-04 [2] CRAN (R 4.5.0)
    ##  htmlwidgets            1.6.4     2023-12-06 [2] CRAN (R 4.5.0)
    ##  httr                   1.4.7     2023-08-15 [2] CRAN (R 4.5.0)
    ##  IRanges              * 2.43.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  iterators              1.0.14    2022-02-05 [2] CRAN (R 4.5.0)
    ##  jquerylib              0.1.4     2021-04-26 [2] CRAN (R 4.5.0)
    ##  jsonlite               2.0.0     2025-03-27 [2] CRAN (R 4.5.0)
    ##  KEGGREST               1.49.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  knitr                * 1.50      2025-03-16 [2] CRAN (R 4.5.0)
    ##  knitrBootstrap         1.0.3     2024-02-06 [2] CRAN (R 4.5.0)
    ##  labeling               0.4.3     2023-08-29 [2] CRAN (R 4.5.0)
    ##  lattice                0.22-7    2025-04-02 [2] CRAN (R 4.5.0)
    ##  lazyeval               0.2.2     2019-03-15 [2] CRAN (R 4.5.0)
    ##  lifecycle              1.0.4     2023-11-07 [2] CRAN (R 4.5.0)
    ##  limma                * 3.65.1    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  locfit                 1.5-9.12  2025-03-05 [2] CRAN (R 4.5.0)
    ##  lubridate              1.9.4     2024-12-08 [2] CRAN (R 4.5.0)
    ##  magick                 2.8.6     2025-03-23 [2] CRAN (R 4.5.0)
    ##  magrittr               2.0.3     2022-03-30 [2] CRAN (R 4.5.0)
    ##  markdown               2.0       2025-03-23 [2] CRAN (R 4.5.0)
    ##  Matrix                 1.7-3     2025-03-11 [2] CRAN (R 4.5.0)
    ##  MatrixGenerics       * 1.21.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  matrixStats          * 1.5.0     2025-01-07 [2] CRAN (R 4.5.0)
    ##  memoise                2.0.1     2021-11-26 [2] CRAN (R 4.5.0)
    ##  nnet                   7.3-20    2025-01-01 [2] CRAN (R 4.5.0)
    ##  org.Hs.eg.db         * 3.21.0    2025-04-18 [2] Bioconductor
    ##  pheatmap             * 1.0.12    2019-01-04 [2] CRAN (R 4.5.0)
    ##  pillar                 1.10.2    2025-04-05 [2] CRAN (R 4.5.0)
    ##  pkgconfig              2.0.3     2019-09-22 [2] CRAN (R 4.5.0)
    ##  plyr                   1.8.9     2023-10-02 [2] CRAN (R 4.5.0)
    ##  png                    0.1-8     2022-11-29 [2] CRAN (R 4.5.0)
    ##  ProtGenerics           1.41.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  purrr                  1.0.4     2025-02-05 [2] CRAN (R 4.5.0)
    ##  qvalue                 2.41.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  R6                     2.6.1     2025-02-15 [2] CRAN (R 4.5.0)
    ##  RColorBrewer         * 1.1-3     2022-04-03 [2] CRAN (R 4.5.0)
    ##  Rcpp                   1.0.14    2025-01-12 [2] CRAN (R 4.5.0)
    ##  RCurl                  1.98-1.17 2025-03-22 [2] CRAN (R 4.5.0)
    ##  readr                  2.1.5     2024-01-10 [2] CRAN (R 4.5.0)
    ##  recount              * 1.35.0    2025-06-04 [1] Bioconductor 3.22 (R 4.5.0)
    ##  RefManageR           * 1.4.0     2022-09-30 [2] CRAN (R 4.5.0)
    ##  regionReport         * 1.43.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  rentrez                1.2.3     2020-11-10 [2] CRAN (R 4.5.0)
    ##  reshape2               1.4.4     2020-04-09 [2] CRAN (R 4.5.0)
    ##  restfulr               0.0.15    2022-06-16 [2] CRAN (R 4.5.0)
    ##  rjson                  0.2.23    2024-09-16 [2] CRAN (R 4.5.0)
    ##  rlang                  1.1.6     2025-04-11 [2] CRAN (R 4.5.0)
    ##  rmarkdown              2.29      2024-11-04 [2] CRAN (R 4.5.0)
    ##  rngtools               1.5.2     2021-09-20 [2] CRAN (R 4.5.0)
    ##  rpart                  4.1.24    2025-01-07 [2] CRAN (R 4.5.0)
    ##  Rsamtools              2.25.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  RSQLite                2.4.0     2025-05-31 [2] CRAN (R 4.5.0)
    ##  rstudioapi             0.17.1    2024-10-22 [2] CRAN (R 4.5.0)
    ##  rtracklayer            1.69.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  S4Arrays               1.9.1     2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  S4Vectors            * 0.47.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  sass                   0.4.10    2025-04-11 [2] CRAN (R 4.5.0)
    ##  scales                 1.4.0     2025-04-24 [2] CRAN (R 4.5.0)
    ##  sessioninfo          * 1.2.3     2025-02-05 [2] CRAN (R 4.5.0)
    ##  SparseArray            1.9.0     2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  statmod                1.5.0     2023-01-06 [2] CRAN (R 4.5.0)
    ##  stringi                1.8.7     2025-03-27 [2] CRAN (R 4.5.0)
    ##  stringr                1.5.1     2023-11-14 [2] CRAN (R 4.5.0)
    ##  SummarizedExperiment * 1.39.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  tibble                 3.2.1     2023-03-20 [2] CRAN (R 4.5.0)
    ##  tidyr                  1.3.1     2024-01-24 [2] CRAN (R 4.5.0)
    ##  tidyselect             1.2.1     2024-03-11 [2] CRAN (R 4.5.0)
    ##  timechange             0.3.0     2024-01-18 [2] CRAN (R 4.5.0)
    ##  tinytex                0.57      2025-04-15 [2] CRAN (R 4.5.0)
    ##  tzdb                   0.5.0     2025-03-15 [2] CRAN (R 4.5.0)
    ##  UCSC.utils             1.5.0     2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  VariantAnnotation      1.55.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  vctrs                  0.6.5     2023-12-01 [2] CRAN (R 4.5.0)
    ##  withr                  3.0.2     2024-10-28 [2] CRAN (R 4.5.0)
    ##  xfun                   0.52      2025-04-02 [2] CRAN (R 4.5.0)
    ##  XML                    3.99-0.18 2025-01-01 [2] CRAN (R 4.5.0)
    ##  xml2                   1.3.8     2025-03-14 [2] CRAN (R 4.5.0)
    ##  XVector                0.49.0    2025-06-04 [2] Bioconductor 3.22 (R 4.5.0)
    ##  yaml                   2.3.10    2024-07-26 [2] CRAN (R 4.5.0)
    ##
    ##  [1] F:/biocbuild/bbs-3.22-bioc/tmpdir/Rtmpczc6eI/Rinst2074827ba320d
    ##  [2] F:/biocbuild/bbs-3.22-bioc/R/library
    ##  * ── Packages attached to the search path.
    ##
    ## ──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

# 14 Bibliography

This vignette was generated using BiocStyle (Oleś, 2025) with knitr (Xie, 2014) and rmarkdown (Allaire, Xie, Dervieux et al., 2024) running behind the scenes.

Citations made with RefManageR (McLean, 2017).

[1] J. Allaire, Y. Xie, C. Dervieux, et al. rmarkdown: Dynamic Documents for R. R package version 2.29. 2024. URL: https://github.com/rstudio/rmarkdown.

[2] S. Arora, M. Morgan, M. Carlson, et al. GenomeInfoDb: Utilities for manipulating chromosome and other ‘seqname’ identifiers. 2017. DOI: 10.18129/B9.bioc.GenomeInfoDb.

[3] M. Carlson. org.Hs.eg.db: Genome wide annotation for Human. R package version 3.21.0. 2025.

[4] W. Chang. downloader: Download Files over HTTP and HTTPS. R package version 0.4.1. 2025. DOI: 10.32614/CRAN.package.downloader. URL: https://CRAN.R-project.org/package=downloader.

[5] L. Collado-Torres, A. E. Jaffe, and J. T. Leek. “regionReport: Interactive reports for region-level and feature-level genomic analyses [version2; referees: 2 approved, 1 approved with reservations]”. In: F1000Research 4 (2016), p. 105. DOI: 10.12688/f1000research.6379.2. URL: http://f1000research.com/articles/4-105/v2.

[6] L. Collado-Torres, A. Nellore, A. C. Frazee, et al. “Flexible expressed region analysis for RNA-seq with derfinder”. In: Nucl. Acids Res. (2017). DOI: 10.1093/nar/gkw852. URL: http://nar.oxfordjournals.org/content/early/2016/09/29/nar.gkw852.

[7] L. Collado-Torres, A. Nellore, and A. E. Jaffe. “recount workflow: Accessing over 70,000 human RNA-seq samples with Bioconductor [version 1; referees: 1 approved, 2 approved with reservations]”. In: F1000Research (2017). DOI: 10.12688/f1000research.12223.1. URL: https://f1000research.com/articles/6-1558/v1.

[8] L. Collado-Torres, A. Nellore, K. Kammers, et al. “Reproducible RNA-seq analysis using recount2”. In: Nature Biotechnology (2017). DOI: 10.1038/nbt.3838. URL: http://www.nature.com/nbt/journal/v35/n4/full/nbt.3838.html.

[9] S. Davis and P. Meltzer. “GEOquery: a bridge between the Gene Expression Omnibus (GEO) and BioConductor”. In: Bioinformatics 14 (2007), pp. 1846–1847. DOI: 10.1093/bioinformatics/btm254.

[10] S. E. Ellis, L. Collado-Torres, A. E. Jaffe, et al. “Improving the value of public RNA-seq expression data by phenotype prediction”. In: Nucl. Acids Res. (2018). DOI: 10.1093/nar/gky102. URL: https://doi.org/10.1093/nar/gky102.

[11] M. Lawrence, R. Gentleman, and V. Carey. “rtracklayer: an R package for interfacing with genome browsers”. In: Bioinformatics 25 (2009), pp. 1841-1842. DOI: 10.1093/bioinformatics/btp328. URL: http://bioinformatics.oxfordjournals.org/content/25/14/1841.abstract.

[12] M. Lawrence, W. Huber, H. Pagès, et al. “Software for Computing and Annotating Genomic Ranges”. In: PLoS Computational Biology 9 (8 2013). DOI: 10.1371/journal.pcbi.1003118. URL: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1003118}.

[13] M. I. Love, W. Huber, and S. Anders. “Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2”. In: Genome Biology 15 (12 2014), p. 550. DOI: 10.1186/s13059-014-0550-8.

[14] M. W. McLean. “RefManageR: Import and Manage BibTeX and BibLaTeX References in R”. In: The Journal of Open Source Software (2017). DOI: 10.21105/joss.00338.

[15] M. Morgan, V. Obenchain, J. Hester, et al. SummarizedExperiment: SummarizedExperiment container. 2017. DOI: 10.18129/B9.bioc.SummarizedExperiment.

[16] M. Morgan, J. Wang, V. Obenchain, et al. BiocParallel: Bioconductor facilities for parallel evaluation. R package version 1.43.3. 2025. DOI: 10.18129/B9.bioc.BiocParallel. URL: https://bioconductor.org/packages/BiocParallel.

[17] A. Oleś. BiocStyle: Standard styles for vignettes and other Bioconductor documents. R package version 2.37.0. 2025. DOI: 10.18129/B9.bioc.BiocStyle. URL: https://bioconductor.org/packages/BiocStyle.

[18] H. Pagès, M. Carlson, S. Falcon, et al. AnnotationDbi: Annotation Database Interface. 2017. DOI: 10.18129/B9.bioc.AnnotationDbi.

[19] H. Pagès, M. Lawrence, and P. Aboyoun. S4Vectors: S4 implementation of vector-like and list-like objects. 2017. DOI: 10.18129/B9.bioc.S4Vectors.

[20] R Core Team. R: A Language and Environment for Statistical Computing. R Foundation for Statistical Computing. Vienna, Austria, 2025. URL: https://www.R-project.org/.

[21] J. Rainer. EnsDb.Hsapiens.v79: Ensembl based annotation package. R package version 2.99.0. 2017.

[22] D. Temple Lang. RCurl: General Network (HTTP/FTP/…) Client Interface for R. R package version 1.98-1.17. 2025. DOI: 10.32614/CRAN.package.RCurl. URL: https://CRAN.R-project.org/package=RCurl.

[23] H. Wickham. “testthat: Get Started with Testing”. In: The R Journal 3 (2011), pp. 5–10. URL: https://journal.r-project.org/archive/2011-1/RJournal_2011-1_Wickham.pdf.

[24] H. Wickham, W. Chang, R. Flight, et al. sessioninfo: R Session Information. R package version 1.2.3. 2025. DOI: 10.32614/CRAN.package.sessioninfo. URL: https://CRAN.R-project.org/package=sessioninfo.

[25] D. J. Winter. “rentrez: an R package for the NCBI eUtils API”. In: The R Journal 9 (2 2017), pp. 520–526.

[26] Y. Xie. “knitr: A Comprehensive Tool for Reproducible Research in R”. In: Implementing Reproducible Computational Research. Ed. by V. Stodden, F. Leisch and R. D. Peng. ISBN 978-1466561595. Chapman and Hall/CRC, 2014.